diff options
Diffstat (limited to 'arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts')
| -rw-r--r-- | arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts | 79 |
1 files changed, 65 insertions, 14 deletions
diff --git a/arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts b/arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts index 8fcd95805ff4..5b8dcc19deee 100644 --- a/arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts +++ b/arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts @@ -90,20 +90,71 @@ timeout-ms = <5000>; }; - /* The first 16MB region on the expansion bus */ - flash@50000000 { - compatible = "intel,ixp4xx-flash", "cfi-flash"; - bank-width = <2>; - /* - * 8 MB of Flash in 0x20000 byte blocks - * mapped in at 0x50000000 - */ - reg = <0x50000000 0x800000>; - - partitions { - compatible = "redboot-fis"; - /* Eraseblock at 0x7e0000 */ - fis-index-block = <0x3f>; + gpio-beeper { + compatible = "gpio-beeper"; + gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>; + }; + + soc { + bus@50000000 { + /* The first 16MB region at CS0 on the expansion bus */ + flash@0 { + compatible = "intel,ixp4xx-flash", "cfi-flash"; + bank-width = <2>; + /* + * 8 MB of Flash in 0x20000 byte blocks + * mapped in at CS0. + */ + reg = <0x00000000 0x800000>; + + partitions { + compatible = "redboot-fis"; + /* Eraseblock at 0x7e0000 */ + fis-index-block = <0x3f>; + }; + }; + }; + + pci@c0000000 { + status = "ok"; + + /* + * Taken from NSLU2 PCI boardfile, INT A, B, C swizzled D constant + * We have slots (IDSEL) 1, 2 and 3. + */ + interrupt-map = + /* IDSEL 1 */ + <0x0800 0 0 1 &gpio0 11 3>, /* INT A on slot 1 is irq 11 */ + <0x0800 0 0 2 &gpio0 10 3>, /* INT B on slot 1 is irq 10 */ + <0x0800 0 0 3 &gpio0 9 3>, /* INT C on slot 1 is irq 9 */ + <0x0800 0 0 4 &gpio0 8 3>, /* INT D on slot 1 is irq 8 */ + /* IDSEL 2 */ + <0x1000 0 0 1 &gpio0 10 3>, /* INT A on slot 2 is irq 10 */ + <0x1000 0 0 2 &gpio0 9 3>, /* INT B on slot 2 is irq 9 */ + <0x1000 0 0 3 &gpio0 11 3>, /* INT C on slot 2 is irq 11 */ + <0x1000 0 0 4 &gpio0 8 3>, /* INT D on slot 2 is irq 8 */ + /* IDSEL 3 */ + <0x1800 0 0 1 &gpio0 9 3>, /* INT A on slot 3 is irq 9 */ + <0x1800 0 0 2 &gpio0 11 3>, /* INT B on slot 3 is irq 11 */ + <0x1800 0 0 3 &gpio0 10 3>, /* INT C on slot 3 is irq 10 */ + <0x1800 0 0 4 &gpio0 8 3>; /* INT D on slot 3 is irq 8 */ + }; + + ethernet@c8009000 { + status = "ok"; + queue-rx = <&qmgr 3>; + queue-txready = <&qmgr 20>; + phy-mode = "rgmii"; + phy-handle = <&phy1>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + phy1: ethernet-phy@1 { + reg = <1>; + }; + }; }; }; }; |