diff options
Diffstat (limited to 'arch/arm/boot/dts/imx6qdl-gw552x.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/imx6qdl-gw552x.dtsi | 167 |
1 files changed, 160 insertions, 7 deletions
diff --git a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi index dc646b72b59a..0da6e6f7482b 100644 --- a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi @@ -4,6 +4,7 @@ */ #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/linux-event-codes.h> / { /* these are used by bootloader for disabling nodes */ @@ -20,6 +21,53 @@ bootargs = "console=ttymxc1,115200"; }; + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + user-pb { + label = "user_pb"; + gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; + linux,code = <BTN_0>; + }; + + user-pb1x { + label = "user_pb1x"; + linux,code = <BTN_1>; + interrupt-parent = <&gsc>; + interrupts = <0>; + }; + + key-erased { + label = "key-erased"; + linux,code = <BTN_2>; + interrupt-parent = <&gsc>; + interrupts = <1>; + }; + + eeprom-wp { + label = "eeprom_wp"; + linux,code = <BTN_3>; + interrupt-parent = <&gsc>; + interrupts = <2>; + }; + + tamper { + label = "tamper"; + linux,code = <BTN_4>; + interrupt-parent = <&gsc>; + interrupts = <5>; + }; + + switch-hold { + label = "switch_hold"; + linux,code = <BTN_5>; + interrupt-parent = <&gsc>; + interrupts = <7>; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -92,6 +140,103 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; + gsc: gsc@20 { + compatible = "gw,gsc"; + reg = <0x20>; + interrupt-parent = <&gpio1>; + interrupts = <4 GPIO_ACTIVE_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + #size-cells = <0>; + + adc { + compatible = "gw,gsc-adc"; + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + gw,mode = <0>; + reg = <0x00>; + label = "temp"; + }; + + channel@2 { + gw,mode = <1>; + reg = <0x02>; + label = "vdd_vin"; + }; + + channel@5 { + gw,mode = <1>; + reg = <0x05>; + label = "vdd_3p3"; + }; + + channel@8 { + gw,mode = <1>; + reg = <0x08>; + label = "vdd_bat"; + }; + + channel@b { + gw,mode = <1>; + reg = <0x0b>; + label = "vdd_5p0"; + }; + + channel@e { + gw,mode = <1>; + reg = <0xe>; + label = "vdd_arm"; + }; + + channel@11 { + gw,mode = <1>; + reg = <0x11>; + label = "vdd_soc"; + }; + + channel@14 { + gw,mode = <1>; + reg = <0x14>; + label = "vdd_3p0"; + }; + + channel@17 { + gw,mode = <1>; + reg = <0x17>; + label = "vdd_1p5"; + }; + + channel@1d { + gw,mode = <1>; + reg = <0x1d>; + label = "vdd_1p8"; + }; + + channel@20 { + gw,mode = <1>; + reg = <0x20>; + label = "vdd_1p0"; + }; + + channel@23 { + gw,mode = <1>; + reg = <0x23>; + label = "vdd_2p5"; + }; + }; + }; + + gsc_gpio: gpio@23 { + compatible = "nxp,pca9555"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gsc>; + interrupts = <4>; + }; + eeprom1: eeprom@50 { compatible = "atmel,24c02"; reg = <0x50>; @@ -116,13 +261,6 @@ pagesize = <16>; }; - gpio: pca9555@23 { - compatible = "nxp,pca9555"; - reg = <0x23>; - gpio-controller; - #gpio-cells = <2>; - }; - rtc: ds1672@68 { compatible = "dallas,ds1672"; reg = <0x68>; @@ -258,6 +396,14 @@ status = "okay"; }; +&usbotg { + vbus-supply = <®_5p0v>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + status = "okay"; +}; + &wdog1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_wdog>; @@ -297,6 +443,7 @@ fsl,pins = < MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0xb0b1 >; }; @@ -359,6 +506,12 @@ >; }; + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x13059 + >; + }; + pinctrl_wdog: wdoggrp { fsl,pins = < MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0 |