1 files changed, 128 insertions, 0 deletions
diff --git a/Documentation/tty/tty_driver.rst b/Documentation/tty/tty_driver.rst
new file mode 100644
index 000000000000..cc529f863406
--- /dev/null
+++ b/Documentation/tty/tty_driver.rst
@@ -0,0 +1,128 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=============================
+TTY Driver and TTY Operations
+=============================
+
+.. contents:: :local:
+
+Allocation
+==========
+
+The first thing a driver needs to do is to allocate a struct tty_driver. This
+is done by tty_alloc_driver() (or __tty_alloc_driver()). Next, the newly
+allocated structure is filled with information. See `TTY Driver Reference`_ at
+the end of this document on what actually shall be filled in.
+
+The allocation routines expect a number of devices the driver can handle at
+most and flags. Flags are those starting ``TTY_DRIVER_`` listed and described
+in `TTY Driver Flags`_ below.
+
+When the driver is about to be freed, tty_driver_kref_put() is called on that.
+It will decrements the reference count and if it reaches zero, the driver is
+freed.
+
+For reference, both allocation and deallocation functions are explained here in
+detail:
+
+.. kernel-doc:: drivers/tty/tty_io.c
+   :identifiers: __tty_alloc_driver tty_driver_kref_put
+
+TTY Driver Flags
+----------------
+
+Here comes the documentation of flags accepted by tty_alloc_driver() (or
+__tty_alloc_driver()):
+
+.. kernel-doc:: include/linux/tty_driver.h
+   :doc: TTY Driver Flags
+
+----
+
+Registration
+============
+
+When a struct tty_driver is allocated and filled in, it can be registered using
+tty_register_driver(). It is recommended to pass ``TTY_DRIVER_DYNAMIC_DEV`` in
+flags of tty_alloc_driver(). If it is not passed, *all* devices are also
+registered during tty_register_driver() and the following paragraph of
+registering devices can be skipped for such drivers. However, the struct
+tty_port part in `Registering Devices`_ is still relevant there.
+
+.. kernel-doc:: drivers/tty/tty_io.c
+   :identifiers: tty_register_driver tty_unregister_driver
+
+Registering Devices
+-------------------
+
+Every TTY device shall be backed by a struct tty_port. Usually, TTY drivers
+embed tty_port into device's private structures. Further details about handling
+tty_port can be found in :doc:`tty_port`. The driver is also recommended to use
+tty_port's reference counting by tty_port_get() and tty_port_put(). The final
+put is supposed to free the tty_port including the device's private struct.
+
+Unless ``TTY_DRIVER_DYNAMIC_DEV`` was passed as flags to tty_alloc_driver(),
+TTY driver is supposed to register every device discovered in the system
+(the latter is preferred). This is performed by tty_register_device(). Or by
+tty_register_device_attr() if the driver wants to expose some information
+through struct attribute_group. Both of them register ``index``'th device and
+upon return, the device can be opened. There are also preferred tty_port
+variants described in `Linking Devices to Ports`_ later. It is up to driver to
+manage free indices and choosing the right one. The TTY layer only refuses to
+register more devices than passed to tty_alloc_driver().
+
+When the device is opened, the TTY layer allocates struct tty_struct and starts
+calling operations from :c:member:`tty_driver.ops`, see `TTY Operations
+Reference`_.
+
+The registration routines are documented as follows:
+
+.. kernel-doc:: drivers/tty/tty_io.c
+   :identifiers: tty_register_device tty_register_device_attr
+        tty_unregister_device
+
+----
+
+Linking Devices to Ports
+------------------------
+As stated earlier, every TTY device shall have a struct tty_port assigned to
+it. It must be known to the TTY layer at :c:member:`tty_driver.ops.install()`
+at latest.  There are few helpers to *link* the two. Ideally, the driver uses
+tty_port_register_device() or tty_port_register_device_attr() instead of
+tty_register_device() and tty_register_device_attr() at the registration time.
+This way, the driver needs not care about linking later on.
+
+If that is not possible, the driver still can link the tty_port to a specific
+index *before* the actual registration by tty_port_link_device(). If it still
+does not fit, tty_port_install() can be used from the
+:c:member:`tty_driver.ops.install` hook as a last resort. The last one is
+dedicated mostly for in-memory devices like PTY where tty_ports are allocated
+on demand.
+
+The linking routines are documented here:
+
+.. kernel-doc::  drivers/tty/tty_port.c
+   :identifiers: tty_port_link_device tty_port_register_device
+        tty_port_register_device_attr
+
+----
+
+TTY Driver Reference
+====================
+
+All members of struct tty_driver are documented here. The required members are
+noted at the end. struct tty_operations are documented next.
+
+.. kernel-doc:: include/linux/tty_driver.h
+   :identifiers: tty_driver
+
+----
+
+TTY Operations Reference
+========================
+
+When a TTY is registered, these driver hooks can be invoked by the TTY layer:
+
+.. kernel-doc:: include/linux/tty_driver.h
+   :identifiers: tty_operations
+