diff options
Diffstat (limited to 'Documentation/networking/device_drivers/ethernet')
| -rw-r--r-- | Documentation/networking/device_drivers/ethernet/index.rst | 1 | ||||
| -rw-r--r-- | Documentation/networking/device_drivers/ethernet/intel/ixgb.rst | 468 |
2 files changed, 0 insertions, 469 deletions
diff --git a/Documentation/networking/device_drivers/ethernet/index.rst b/Documentation/networking/device_drivers/ethernet/index.rst index 392969ac88ad..6e9e7012d000 100644 --- a/Documentation/networking/device_drivers/ethernet/index.rst +++ b/Documentation/networking/device_drivers/ethernet/index.rst @@ -31,7 +31,6 @@ Contents: intel/fm10k intel/igb intel/igbvf - intel/ixgb intel/ixgbe intel/ixgbevf intel/i40e diff --git a/Documentation/networking/device_drivers/ethernet/intel/ixgb.rst b/Documentation/networking/device_drivers/ethernet/intel/ixgb.rst deleted file mode 100644 index c6a233e68ad6..000000000000 --- a/Documentation/networking/device_drivers/ethernet/intel/ixgb.rst +++ /dev/null @@ -1,468 +0,0 @@ -.. SPDX-License-Identifier: GPL-2.0+ - -===================================================================== -Linux Base Driver for 10 Gigabit Intel(R) Ethernet Network Connection -===================================================================== - -October 1, 2018 - - -Contents -======== - -- In This Release -- Identifying Your Adapter -- Command Line Parameters -- Improving Performance -- Additional Configurations -- Known Issues/Troubleshooting -- Support - - - -In This Release -=============== - -This file describes the ixgb Linux Base Driver for the 10 Gigabit Intel(R) -Network Connection. This driver includes support for Itanium(R)2-based -systems. - -For questions related to hardware requirements, refer to the documentation -supplied with your 10 Gigabit adapter. All hardware requirements listed apply -to use with Linux. - -The following features are available in this kernel: - - Native VLANs - - Channel Bonding (teaming) - - SNMP - -Channel Bonding documentation can be found in the Linux kernel source: -/Documentation/networking/bonding.rst - -The driver information previously displayed in the /proc filesystem is not -supported in this release. Alternatively, you can use ethtool (version 1.6 -or later), lspci, and iproute2 to obtain the same information. - -Instructions on updating ethtool can be found in the section "Additional -Configurations" later in this document. - - -Identifying Your Adapter -======================== - -The following Intel network adapters are compatible with the drivers in this -release: - -+------------+------------------------------+----------------------------------+ -| Controller | Adapter Name | Physical Layer | -+============+==============================+==================================+ -| 82597EX | Intel(R) PRO/10GbE LR/SR/CX4 | - 10G Base-LR (fiber) | -| | Server Adapters | - 10G Base-SR (fiber) | -| | | - 10G Base-CX4 (copper) | -+------------+------------------------------+----------------------------------+ - -For more information on how to identify your adapter, go to the Adapter & -Driver ID Guide at: - - https://support.intel.com - - -Command Line Parameters -======================= - -If the driver is built as a module, the following optional parameters are -used by entering them on the command line with the modprobe command using -this syntax:: - - modprobe ixgb [<option>=<VAL1>,<VAL2>,...] - -For example, with two 10GbE PCI adapters, entering:: - - modprobe ixgb TxDescriptors=80,128 - -loads the ixgb driver with 80 TX resources for the first adapter and 128 TX -resources for the second adapter. - -The default value for each parameter is generally the recommended setting, -unless otherwise noted. - -Copybreak ---------- -:Valid Range: 0-XXXX -:Default Value: 256 - - This is the maximum size of packet that is copied to a new buffer on - receive. - -Debug ------ -:Valid Range: 0-16 (0=none,...,16=all) -:Default Value: 0 - - This parameter adjusts the level of debug messages displayed in the - system logs. - -FlowControl ------------ -:Valid Range: 0-3 (0=none, 1=Rx only, 2=Tx only, 3=Rx&Tx) -:Default Value: 1 if no EEPROM, otherwise read from EEPROM - - This parameter controls the automatic generation(Tx) and response(Rx) to - Ethernet PAUSE frames. There are hardware bugs associated with enabling - Tx flow control so beware. - -RxDescriptors -------------- -:Valid Range: 64-4096 -:Default Value: 1024 - - This value is the number of receive descriptors allocated by the driver. - Increasing this value allows the driver to buffer more incoming packets. - Each descriptor is 16 bytes. A receive buffer is also allocated for - each descriptor and can be either 2048, 4056, 8192, or 16384 bytes, - depending on the MTU setting. When the MTU size is 1500 or less, the - receive buffer size is 2048 bytes. When the MTU is greater than 1500 the - receive buffer size will be either 4056, 8192, or 16384 bytes. The - maximum MTU size is 16114. - -TxDescriptors -------------- -:Valid Range: 64-4096 -:Default Value: 256 - - This value is the number of transmit descriptors allocated by the driver. - Increasing this value allows the driver to queue more transmits. Each - descriptor is 16 bytes. - -RxIntDelay ----------- -:Valid Range: 0-65535 (0=off) -:Default Value: 72 - - This value delays the generation of receive interrupts in units of - 0.8192 microseconds. Receive interrupt reduction can improve CPU - efficiency if properly tuned for specific network traffic. Increasing - this value adds extra latency to frame reception and can end up - decreasing the throughput of TCP traffic. If the system is reporting - dropped receives, this value may be set too high, causing the driver to - run out of available receive descriptors. - -TxIntDelay ----------- -:Valid Range: 0-65535 (0=off) -:Default Value: 32 - - This value delays the generation of transmit interrupts in units of - 0.8192 microseconds. Transmit interrupt reduction can improve CPU - efficiency if properly tuned for specific network traffic. Increasing - this value adds extra latency to frame transmission and can end up - decreasing the throughput of TCP traffic. If this value is set too high, - it will cause the driver to run out of available transmit descriptors. - -XsumRX ------- -:Valid Range: 0-1 -:Default Value: 1 - - A value of '1' indicates that the driver should enable IP checksum - offload for received packets (both UDP and TCP) to the adapter hardware. - -RxFCHighThresh --------------- -:Valid Range: 1,536-262,136 (0x600 - 0x3FFF8, 8 byte granularity) -:Default Value: 196,608 (0x30000) - - Receive Flow control high threshold (when we send a pause frame) - -RxFCLowThresh -------------- -:Valid Range: 64-262,136 (0x40 - 0x3FFF8, 8 byte granularity) -:Default Value: 163,840 (0x28000) - - Receive Flow control low threshold (when we send a resume frame) - -FCReqTimeout ------------- -:Valid Range: 1-65535 -:Default Value: 65535 - - Flow control request timeout (how long to pause the link partner's tx) - -IntDelayEnable --------------- -:Value Range: 0,1 -:Default Value: 1 - - Interrupt Delay, 0 disables transmit interrupt delay and 1 enables it. - - -Improving Performance -===================== - -With the 10 Gigabit server adapters, the default Linux configuration will -very likely limit the total available throughput artificially. There is a set -of configuration changes that, when applied together, will increase the ability -of Linux to transmit and receive data. The following enhancements were -originally acquired from settings published at https://www.spec.org/web99/ for -various submitted results using Linux. - -NOTE: - These changes are only suggestions, and serve as a starting point for - tuning your network performance. - -The changes are made in three major ways, listed in order of greatest effect: - -- Use ip link to modify the mtu (maximum transmission unit) and the txqueuelen - parameter. -- Use sysctl to modify /proc parameters (essentially kernel tuning) -- Use setpci to modify the MMRBC field in PCI-X configuration space to increase - transmit burst lengths on the bus. - -NOTE: - setpci modifies the adapter's configuration registers to allow it to read - up to 4k bytes at a time (for transmits). However, for some systems the - behavior after modifying this register may be undefined (possibly errors of - some kind). A power-cycle, hard reset or explicitly setting the e6 register - back to 22 (setpci -d 8086:1a48 e6.b=22) may be required to get back to a - stable configuration. - -- COPY these lines and paste them into ixgb_perf.sh: - -:: - - #!/bin/bash - echo "configuring network performance , edit this file to change the interface - or device ID of 10GbE card" - # set mmrbc to 4k reads, modify only Intel 10GbE device IDs - # replace 1a48 with appropriate 10GbE device's ID installed on the system, - # if needed. - setpci -d 8086:1a48 e6.b=2e - # set the MTU (max transmission unit) - it requires your switch and clients - # to change as well. - # set the txqueuelen - # your ixgb adapter should be loaded as eth1 for this to work, change if needed - ip li set dev eth1 mtu 9000 txqueuelen 1000 up - # call the sysctl utility to modify /proc/sys entries - sysctl -p ./sysctl_ixgb.conf - -- COPY these lines and paste them into sysctl_ixgb.conf: - -:: - - # some of the defaults may be different for your kernel - # call this file with sysctl -p <this file> - # these are just suggested values that worked well to increase throughput in - # several network benchmark tests, your mileage may vary - - ### IPV4 specific settings - # turn TCP timestamp support off, default 1, reduces CPU use - net.ipv4.tcp_timestamps = 0 - # turn SACK support off, default on - # on systems with a VERY fast bus -> memory interface this is the big gainer - net.ipv4.tcp_sack = 0 - # set min/default/max TCP read buffer, default 4096 87380 174760 - net.ipv4.tcp_rmem = 10000000 10000000 10000000 - # set min/pressure/max TCP write buffer, default 4096 16384 131072 - net.ipv4.tcp_wmem = 10000000 10000000 10000000 - # set min/pressure/max TCP buffer space, default 31744 32256 32768 - net.ipv4.tcp_mem = 10000000 10000000 10000000 - - ### CORE settings (mostly for socket and UDP effect) - # set maximum receive socket buffer size, default 131071 - net.core.rmem_max = 524287 - # set maximum send socket buffer size, default 131071 - net.core.wmem_max = 524287 - # set default receive socket buffer size, default 65535 - net.core.rmem_default = 524287 - # set default send socket buffer size, default 65535 - net.core.wmem_default = 524287 - # set maximum amount of option memory buffers, default 10240 - net.core.optmem_max = 524287 - # set number of unprocessed input packets before kernel starts dropping them; default 300 - net.core.netdev_max_backlog = 300000 - -Edit the ixgb_perf.sh script if necessary to change eth1 to whatever interface -your ixgb driver is using and/or replace '1a48' with appropriate 10GbE device's -ID installed on the system. - -NOTE: - Unless these scripts are added to the boot process, these changes will - only last only until the next system reboot. - - -Resolving Slow UDP Traffic --------------------------- -If your server does not seem to be able to receive UDP traffic as fast as it -can receive TCP traffic, it could be because Linux, by default, does not set -the network stack buffers as large as they need to be to support high UDP -transfer rates. One way to alleviate this problem is to allow more memory to -be used by the IP stack to store incoming data. - -For instance, use the commands:: - - sysctl -w net.core.rmem_max=262143 - -and:: - - sysctl -w net.core.rmem_default=262143 - -to increase the read buffer memory max and default to 262143 (256k - 1) from -defaults of max=131071 (128k - 1) and default=65535 (64k - 1). These variables -will increase the amount of memory used by the network stack for receives, and -can be increased significantly more if necessary for your application. - - -Additional Configurations -========================= - -Configuring the Driver on Different Distributions -------------------------------------------------- -Configuring a network driver to load properly when the system is started is -distribution dependent. Typically, the configuration process involves adding -an alias line to /etc/modprobe.conf as well as editing other system startup -scripts and/or configuration files. Many popular Linux distributions ship -with tools to make these changes for you. To learn the proper way to -configure a network device for your system, refer to your distribution -documentation. If during this process you are asked for the driver or module -name, the name for the Linux Base Driver for the Intel 10GbE Family of -Adapters is ixgb. - -Viewing Link Messages ---------------------- -Link messages will not be displayed to the console if the distribution is -restricting system messages. In order to see network driver link messages on -your console, set dmesg to eight by entering the following:: - - dmesg -n 8 - -NOTE: This setting is not saved across reboots. - -Jumbo Frames ------------- -The driver supports Jumbo Frames for all adapters. Jumbo Frames support is -enabled by changing the MTU to a value larger than the default of 1500. -The maximum value for the MTU is 16114. Use the ip command to -increase the MTU size. For example:: - - ip li set dev ethx mtu 9000 - -The maximum MTU setting for Jumbo Frames is 16114. This value coincides -with the maximum Jumbo Frames size of 16128. - -Ethtool -------- -The driver utilizes the ethtool interface for driver configuration and -diagnostics, as well as displaying statistical information. The ethtool -version 1.6 or later is required for this functionality. - -The latest release of ethtool can be found from -https://www.kernel.org/pub/software/network/ethtool/ - -NOTE: - The ethtool version 1.6 only supports a limited set of ethtool options. - Support for a more complete ethtool feature set can be enabled by - upgrading to the latest version. - -NAPI ----- -NAPI (Rx polling mode) is supported in the ixgb driver. - -See https://wiki.linuxfoundation.org/networking/napi for more information on -NAPI. - - -Known Issues/Troubleshooting -============================ - -NOTE: - After installing the driver, if your Intel Network Connection is not - working, verify in the "In This Release" section of the readme that you have - installed the correct driver. - -Cable Interoperability Issue with Fujitsu XENPAK Module in SmartBits Chassis ----------------------------------------------------------------------------- -Excessive CRC errors may be observed if the Intel(R) PRO/10GbE CX4 -Server adapter is connected to a Fujitsu XENPAK CX4 module in a SmartBits -chassis using 15 m/24AWG cable assemblies manufactured by Fujitsu or Leoni. -The CRC errors may be received either by the Intel(R) PRO/10GbE CX4 -Server adapter or the SmartBits. If this situation occurs using a different -cable assembly may resolve the issue. - -Cable Interoperability Issues with HP Procurve 3400cl Switch Port ------------------------------------------------------------------ -Excessive CRC errors may be observed if the Intel(R) PRO/10GbE CX4 Server -adapter is connected to an HP Procurve 3400cl switch port using short cables -(1 m or shorter). If this situation occurs, using a longer cable may resolve -the issue. - -Excessive CRC errors may be observed using Fujitsu 24AWG cable assemblies that -Are 10 m or longer or where using a Leoni 15 m/24AWG cable assembly. The CRC -errors may be received either by the CX4 Server adapter or at the switch. If -this situation occurs, using a different cable assembly may resolve the issue. - -Jumbo Frames System Requirement -------------------------------- -Memory allocation failures have been observed on Linux systems with 64 MB -of RAM or less that are running Jumbo Frames. If you are using Jumbo -Frames, your system may require more than the advertised minimum -requirement of 64 MB of system memory. - -Performance Degradation with Jumbo Frames ------------------------------------------ -Degradation in throughput performance may be observed in some Jumbo frames -environments. If this is observed, increasing the application's socket buffer -size and/or increasing the /proc/sys/net/ipv4/tcp_*mem entry values may help. -See the specific application manual and /usr/src/linux*/Documentation/ -networking/ip-sysctl.txt for more details. - -Allocating Rx Buffers when Using Jumbo Frames ---------------------------------------------- -Allocating Rx buffers when using Jumbo Frames on 2.6.x kernels may fail if -the available memory is heavily fragmented. This issue may be seen with PCI-X -adapters or with packet split disabled. This can be reduced or eliminated -by changing the amount of available memory for receive buffer allocation, by -increasing /proc/sys/vm/min_free_kbytes. - -Multiple Interfaces on Same Ethernet Broadcast Network ------------------------------------------------------- -Due to the default ARP behavior on Linux, it is not possible to have -one system on two IP networks in the same Ethernet broadcast domain -(non-partitioned switch) behave as expected. All Ethernet interfaces -will respond to IP traffic for any IP address assigned to the system. -This results in unbalanced receive traffic. - -If you have multiple interfaces in a server, do either of the following: - - - Turn on ARP filtering by entering:: - - echo 1 > /proc/sys/net/ipv4/conf/all/arp_filter - - - Install the interfaces in separate broadcast domains - either in - different switches or in a switch partitioned to VLANs. - -UDP Stress Test Dropped Packet Issue --------------------------------------- -Under small packets UDP stress test with 10GbE driver, the Linux system -may drop UDP packets due to the fullness of socket buffers. You may want -to change the driver's Flow Control variables to the minimum value for -controlling packet reception. - -Tx Hangs Possible Under Stress ------------------------------- -Under stress conditions, if TX hangs occur, turning off TSO -"ethtool -K eth0 tso off" may resolve the problem. - - -Support -======= -For general information, go to the Intel support website at: - -https://www.intel.com/support/ - -or the Intel Wired Networking project hosted by Sourceforge at: - -https://sourceforge.net/projects/e1000 - -If an issue is identified with the released source code on a supported kernel -with a supported adapter, email the specific information related to the issue -to e1000-devel@lists.sf.net |