diff options
Diffstat (limited to 'Documentation/devicetree')
12 files changed, 1163 insertions, 101 deletions
diff --git a/Documentation/devicetree/bindings/media/i2c/chrontel,ch7322.yaml b/Documentation/devicetree/bindings/media/i2c/chrontel,ch7322.yaml new file mode 100644 index 000000000000..daa2869377c5 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/chrontel,ch7322.yaml @@ -0,0 +1,67 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/media/i2c/chrontel,ch7322.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Chrontel HDMI-CEC Controller + +maintainers: + - Jeff Chase <jnchase@google.com> + +description: + The Chrontel CH7322 is a discrete HDMI-CEC controller. It is + programmable through I2C and drives a single CEC line. + +properties: + compatible: + const: chrontel,ch7322 + + reg: + description: I2C device address + maxItems: 1 + + clocks: + maxItems: 1 + + interrupts: + maxItems: 1 + + reset-gpios: + description: + Reference to the GPIO connected to the RESET pin, if any. This + pin is active-low. + maxItems: 1 + + standby-gpios: + description: + Reference to the GPIO connected to the OE pin, if any. When low + the device will respond to power status requests with "standby" + if in auto mode. + maxItems: 1 + + # see ../cec.txt + hdmi-phandle: + description: phandle to the HDMI controller + +required: + - compatible + - reg + - interrupts + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + ch7322@75 { + compatible = "chrontel,ch7322"; + reg = <0x75>; + interrupts = <47 IRQ_TYPE_EDGE_RISING>; + standby-gpios = <&gpio 16 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio 15 GPIO_ACTIVE_LOW>; + hdmi-phandle = <&hdmi>; + }; + }; diff --git a/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9768.yaml b/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9768.yaml new file mode 100644 index 000000000000..cb96e95d7e81 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/dongwoon,dw9768.yaml @@ -0,0 +1,100 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright (c) 2020 MediaTek Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/dongwoon,dw9768.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Dongwoon Anatech DW9768 Voice Coil Motor (VCM) Lens Device Tree Bindings + +maintainers: + - Dongchun Zhu <dongchun.zhu@mediatek.com> + +description: |- + The Dongwoon DW9768 is a single 10-bit digital-to-analog (DAC) converter + with 100 mA output current sink capability. VCM current is controlled with + a linear mode driver. The DAC is controlled via a 2-wire (I2C-compatible) + serial interface that operates at clock rates up to 1MHz. This chip + integrates Advanced Actuator Control (AAC) technology and is intended for + driving voice coil lenses in camera modules. + +properties: + compatible: + enum: + - dongwoon,dw9768 # for DW9768 VCM + - giantec,gt9769 # for GT9769 VCM + + reg: + maxItems: 1 + + vin-supply: + description: + Definition of the regulator used as Digital I/O voltage supply. + + vdd-supply: + description: + Definition of the regulator used as Digital core voltage supply. + + dongwoon,aac-mode: + description: + Indication of AAC mode select. + allOf: + - $ref: "/schemas/types.yaml#/definitions/uint32" + - enum: + - 1 # AAC2 mode(operation time# 0.48 x Tvib) + - 2 # AAC3 mode(operation time# 0.70 x Tvib) + - 3 # AAC4 mode(operation time# 0.75 x Tvib) + - 5 # AAC8 mode(operation time# 1.13 x Tvib) + default: 2 + + dongwoon,aac-timing: + description: + Number of AAC Timing count that controlled by one 6-bit period of + vibration register AACT[5:0], the unit of which is 100 us. + allOf: + - $ref: "/schemas/types.yaml#/definitions/uint32" + - default: 0x20 + minimum: 0x00 + maximum: 0x3f + + dongwoon,clock-presc: + description: + Indication of VCM internal clock dividing rate select, as one multiple + factor to calculate VCM ring periodic time Tvib. + allOf: + - $ref: "/schemas/types.yaml#/definitions/uint32" + - enum: + - 0 # Dividing Rate - 2 + - 1 # Dividing Rate - 1 + - 2 # Dividing Rate - 1/2 + - 3 # Dividing Rate - 1/4 + - 4 # Dividing Rate - 8 + - 5 # Dividing Rate - 4 + default: 1 + +required: + - compatible + - reg + - vin-supply + - vdd-supply + +additionalProperties: false + +examples: + - | + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + dw9768: camera-lens@c { + compatible = "dongwoon,dw9768"; + reg = <0x0c>; + + vin-supply = <&mt6358_vcamio_reg>; + vdd-supply = <&mt6358_vcama2_reg>; + dongwoon,aac-timing = <0x39>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/media/i2c/imi,rdacm2x-gmsl.yaml b/Documentation/devicetree/bindings/media/i2c/imi,rdacm2x-gmsl.yaml new file mode 100644 index 000000000000..5ad4b8c356cf --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/imi,rdacm2x-gmsl.yaml @@ -0,0 +1,159 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +# Copyright (C) 2019 Renesas Electronics Corp. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/imi,rdacm2x-gmsl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: IMI D&D RDACM20 and RDACM21 Automotive Camera Platforms + +maintainers: + - Jacopo Mondi <jacopo+renesas@jmondi.org> + - Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> + - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> + - Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> + +description: -| + The IMI D&D RDACM20 and RDACM21 are GMSL-compatible camera designed for + automotive applications. + + The RDACM20 camera module encloses a Maxim Integrated MAX9271 GMSL serializer, + coupled with an OV10635 image sensor and an embedded MCU. Both the MCU and + the image sensor are connected to the serializer local I2C bus and are + accessible by the host SoC by direct addressing. + + The RDACM21 camera module encloses the same serializer, coupled with an + OV10640 image sensor and an OV490 ISP. Only the OV490 ISP is interfaced to + the serializer local I2C bus while the image sensor is not accessible from + the host SoC. + + They both connect to a remote GMSL endpoint through a coaxial cable. + + IMI RDACM20 + +---------------+ +--------------------------------+ + | GMSL | <- Video Stream | <- Video--------\ | + | |< === GMSL Link ====== >|MAX9271<- I2C bus-> <-->OV10635 | + | de-serializer | <- I2C messages -> | \<-->MCU | + +---------------+ +--------------------------------+ + + IMI RDACM21 + +---------------+ +--------------------------------+ + | GMSL | <- Video Stream | <- Video--------\ | + | |< === GMSL Link ====== >|MAX9271<- I2C bus-> <-->OV490 | + | | <- I2C messages -> | | | + | de-serializer | | OV10640 <-------| | + +---------------+ +--------------------------------+ + + Both camera modules serialize video data generated by the embedded camera + sensor on the GMSL serial channel to a remote GMSL de-serializer. They also + receive and transmit I2C messages encapsulated and transmitted on the GMSL + bidirectional control channel. + + All I2C traffic received on the GMSL link not directed to the serializer is + propagated on the local I2C bus to the remote device there connected. All the + I2C traffic generated on the local I2C bus not directed to the serializer is + propagated to the remote de-serializer encapsulated in the GMSL control + channel. + + The RDACM20 and RDACM21 DT node should be a direct child of the GMSL + deserializer's I2C bus corresponding to the GMSL link that the camera is + attached to. + +properties: + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + compatible: + enum: + - imi,rdacm20 + - imi,rdacm21 + + reg: + description: -| + I2C device addresses, the first to be assigned to the serializer, the + following ones to be assigned to the remote devices. + + For RDACM20 the second entry of the property is assigned to the + OV10635 image sensor and the optional third one to the embedded MCU. + + For RDACM21 the second entry is assigned to the OV490 ISP and the optional + third one ignored. + + minItems: 2 + maxItems: 3 + + port: + type: object + additionalProperties: false + description: -| + Connection to the remote GMSL endpoint are modelled using the OF graph + bindings in accordance with the video interface bindings defined in + Documentation/devicetree/bindings/media/video-interfaces.txt. + + The device node contains a single "port" child node with a single + "endpoint" sub-device. + + properties: + endpoint: + type: object + additionalProperties: false + + properties: + remote-endpoint: + description: -| + phandle to the remote GMSL endpoint sub-node in the remote node + port. + maxItems: 1 + + required: + - remote-endpoint + + required: + - endpoint + +required: + - compatible + - reg + - port + +examples: + - | + i2c@e66d8000 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <0 0xe66d8000>; + + camera@31 { + compatible = "imi,rdacm20"; + reg = <0x31>, <0x41>, <0x51>; + + port { + rdacm20_out0: endpoint { + remote-endpoint = <&max9286_in0>; + }; + }; + }; + }; + + - | + i2c@e66d8000 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <0 0xe66d8000>; + + camera@31 { + compatible = "imi,rdacm21"; + reg = <0x31>, <0x41>; + + port { + rdacm21_out0: endpoint { + remote-endpoint = <&max9286_in0>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml new file mode 100644 index 000000000000..e7b543159d15 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml @@ -0,0 +1,366 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2019 Renesas Electronics Corp. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/maxim,max9286.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim Integrated Quad GMSL Deserializer + +maintainers: + - Jacopo Mondi <jacopo+renesas@jmondi.org> + - Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> + - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> + - Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> + +description: | + The MAX9286 deserializer receives video data on up to 4 Gigabit Multimedia + Serial Links (GMSL) and outputs them on a CSI-2 D-PHY port using up to 4 data + lanes. + + In addition to video data, the GMSL links carry a bidirectional control + channel that encapsulates I2C messages. The MAX9286 forwards all I2C traffic + not addressed to itself to the other side of the links, where a GMSL + serializer will output it on a local I2C bus. In the other direction all I2C + traffic received over GMSL by the MAX9286 is output on the local I2C bus. + +properties: + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + compatible: + const: maxim,max9286 + + reg: + description: I2C device address + maxItems: 1 + + poc-supply: + description: Regulator providing Power over Coax to the cameras + maxItems: 1 + + enable-gpios: + description: GPIO connected to the \#PWDN pin with inverted polarity + maxItems: 1 + + gpio-controller: true + + '#gpio-cells': + const: 2 + + ports: + type: object + description: | + The connections to the MAX9286 GMSL and its endpoint nodes are modelled + using the OF graph bindings in accordance with the video interface + bindings defined in + Documentation/devicetree/bindings/media/video-interfaces.txt. + + The following table lists the port number corresponding to each device + port. + + Port Description + ---------------------------------------- + Port 0 GMSL Input 0 + Port 1 GMSL Input 1 + Port 2 GMSL Input 2 + Port 3 GMSL Input 3 + Port 4 CSI-2 Output + + properties: + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + port@[0-3]: + type: object + properties: + reg: + enum: [ 0, 1, 2, 3 ] + + endpoint: + type: object + + properties: + remote-endpoint: + description: | + phandle to the remote GMSL source endpoint subnode in the + remote node port. + + required: + - remote-endpoint + + required: + - reg + - endpoint + + additionalProperties: false + + port@4: + type: object + properties: + reg: + const: 4 + + endpoint: + type: object + + properties: + remote-endpoint: + description: phandle to the remote CSI-2 sink endpoint. + + data-lanes: + description: array of physical CSI-2 data lane indexes. + + required: + - remote-endpoint + - data-lanes + + required: + - reg + - endpoint + + additionalProperties: false + + required: + - port@4 + + i2c-mux: + type: object + description: | + Each GMSL link is modelled as a child bus of an i2c bus + multiplexer/switch, in accordance with bindings described in + Documentation/devicetree/bindings/i2c/i2c-mux.txt. + + properties: + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + patternProperties: + "^i2c@[0-3]$": + type: object + description: | + Child node of the i2c bus multiplexer which represents a GMSL link. + Each serializer device on the GMSL link remote end is represented with + an i2c-mux child node. The MAX9286 chip supports up to 4 GMSL + channels. + + properties: + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + reg: + description: The index of the GMSL channel. + maxItems: 1 + + patternProperties: + "^camera@[a-f0-9]+$": + type: object + description: | + The remote camera device, composed by a GMSL serializer and a + connected video source. + + properties: + compatible: + description: The remote device compatible string. + + reg: + minItems: 2 + maxItems: 3 + description: | + The I2C addresses to be assigned to the remote devices through + address reprogramming. The number of entries depends on the + requirements of the currently connected remote device. + + port: + type: object + + properties: + endpoint: + type: object + + properties: + remote-endpoint: + description: phandle to the MAX9286 sink endpoint. + + required: + - remote-endpoint + + additionalProperties: false + + required: + - endpoint + + additionalProperties: false + + required: + - compatible + - reg + - port + + additionalProperties: false + + additionalProperties: false + + additionalProperties: false + +required: + - compatible + - reg + - ports + - i2c-mux + - gpio-controller + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c@e66d8000 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <0 0xe66d8000>; + + gmsl-deserializer@2c { + compatible = "maxim,max9286"; + reg = <0x2c>; + poc-supply = <&camera_poc_12v>; + enable-gpios = <&gpio 13 GPIO_ACTIVE_HIGH>; + + gpio-controller; + #gpio-cells = <2>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + max9286_in0: endpoint { + remote-endpoint = <&rdacm20_out0>; + }; + }; + + port@1 { + reg = <1>; + + max9286_in1: endpoint { + remote-endpoint = <&rdacm20_out1>; + }; + }; + + port@2 { + reg = <2>; + + max9286_in2: endpoint { + remote-endpoint = <&rdacm20_out2>; + }; + }; + + port@3 { + reg = <3>; + + max9286_in3: endpoint { + remote-endpoint = <&rdacm20_out3>; + }; + }; + + port@4 { + reg = <4>; + + max9286_out: endpoint { + data-lanes = <1 2 3 4>; + remote-endpoint = <&csi40_in>; + }; + }; + }; + + i2c-mux { + #address-cells = <1>; + #size-cells = <0>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + camera@51 { + compatible = "imi,rdacm20"; + reg = <0x51>, <0x61>; + + port { + rdacm20_out0: endpoint { + remote-endpoint = <&max9286_in0>; + }; + }; + + }; + }; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + camera@52 { + compatible = "imi,rdacm20"; + reg = <0x52>, <0x62>; + + port { + rdacm20_out1: endpoint { + remote-endpoint = <&max9286_in1>; + }; + }; + }; + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + + camera@53 { + compatible = "imi,rdacm20"; + reg = <0x53>, <0x63>; + + port { + rdacm20_out2: endpoint { + remote-endpoint = <&max9286_in2>; + }; + }; + }; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + camera@54 { + compatible = "imi,rdacm20"; + reg = <0x54>, <0x64>; + + port { + rdacm20_out3: endpoint { + remote-endpoint = <&max9286_in3>; + }; + }; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/media/renesas,fcp.txt b/Documentation/devicetree/bindings/media/renesas,fcp.txt deleted file mode 100644 index 79c37395b396..000000000000 --- a/Documentation/devicetree/bindings/media/renesas,fcp.txt +++ /dev/null @@ -1,34 +0,0 @@ -Renesas R-Car Frame Compression Processor (FCP) ------------------------------------------------ - -The FCP is a companion module of video processing modules in the Renesas R-Car -Gen3 and RZ/G2 SoCs. It provides data compression and decompression, data -caching, and conversion of AXI transactions in order to reduce the memory -bandwidth. - -There are three types of FCP: FCP for Codec (FCPC), FCP for VSP (FCPV) and FCP -for FDP (FCPF). Their configuration and behaviour depend on the module they -are paired with. These DT bindings currently support the FCPV and FCPF. - - - compatible: Must be one or more of the following - - - "renesas,fcpv" for generic compatible 'FCP for VSP' - - "renesas,fcpf" for generic compatible 'FCP for FDP' - - - reg: the register base and size for the device registers - - clocks: Reference to the functional clock - -Optional properties: - - power-domains : power-domain property defined with a power domain specifier - to respective power domain. - - -Device node example -------------------- - - fcpvd1: fcp@fea2f000 { - compatible = "renesas,fcpv"; - reg = <0 0xfea2f000 0 0x200>; - clocks = <&cpg CPG_MOD 602>; - power-domains = <&sysc R8A7795_PD_A3VP>; - }; diff --git a/Documentation/devicetree/bindings/media/renesas,fcp.yaml b/Documentation/devicetree/bindings/media/renesas,fcp.yaml new file mode 100644 index 000000000000..43f2fed8cd33 --- /dev/null +++ b/Documentation/devicetree/bindings/media/renesas,fcp.yaml @@ -0,0 +1,66 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/renesas,fcp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas R-Car Frame Compression Processor (FCP) + +maintainers: + - Laurent Pinchart <laurent.pinchart@ideasonboard.com> + +description: | + The FCP is a companion module of video processing modules in the Renesas + R-Car Gen3 and RZ/G2 SoCs. It provides data compression and decompression, + data caching, and conversion of AXI transactions in order to reduce the + memory bandwidth. + + There are three types of FCP: FCP for Codec (FCPC), FCP for VSP (FCPV) and + FCP for FDP (FCPF). Their configuration and behaviour depend on the module + they are paired with. These DT bindings currently support the FCPV and FCPF. + +properties: + compatible: + enum: + - renesas,fcpv # FCP for VSP + - renesas,fcpf # FCP for FDP + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + iommus: + maxItems: 1 + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - power-domains + - resets + +additionalProperties: false + +examples: + # R8A7795 (R-Car H3) FCP for VSP-D1 + - | + #include <dt-bindings/clock/renesas-cpg-mssr.h> + #include <dt-bindings/power/r8a7795-sysc.h> + + fcp@fea2f000 { + compatible = "renesas,fcpv"; + reg = <0xfea2f000 0x200>; + clocks = <&cpg CPG_MOD 602>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 602>; + iommus = <&ipmmu_vi0 9>; + }; +... diff --git a/Documentation/devicetree/bindings/media/renesas,fdp1.txt b/Documentation/devicetree/bindings/media/renesas,fdp1.txt deleted file mode 100644 index 8dd1007bb573..000000000000 --- a/Documentation/devicetree/bindings/media/renesas,fdp1.txt +++ /dev/null @@ -1,37 +0,0 @@ -Renesas R-Car Fine Display Processor (FDP1) -------------------------------------------- - -The FDP1 is a de-interlacing module which converts interlaced video to -progressive video. It is capable of performing pixel format conversion between -YCbCr/YUV formats and RGB formats. Only YCbCr/YUV formats are supported as -an input to the module. - -Required properties: - - - compatible: must be "renesas,fdp1" - - reg: the register base and size for the device registers - - interrupts : interrupt specifier for the FDP1 instance - - clocks: reference to the functional clock - -Optional properties: - - - power-domains: reference to the power domain that the FDP1 belongs to, if - any. - - renesas,fcp: a phandle referencing the FCP that handles memory accesses - for the FDP1. Not needed on Gen2, mandatory on Gen3. - -Please refer to the binding documentation for the clock and/or power domain -providers for more details. - - -Device node example -------------------- - - fdp1@fe940000 { - compatible = "renesas,fdp1"; - reg = <0 0xfe940000 0 0x2400>; - interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 119>; - power-domains = <&sysc R8A7795_PD_A3VP>; - renesas,fcp = <&fcpf0>; - }; diff --git a/Documentation/devicetree/bindings/media/renesas,fdp1.yaml b/Documentation/devicetree/bindings/media/renesas,fdp1.yaml new file mode 100644 index 000000000000..2a27a7296fea --- /dev/null +++ b/Documentation/devicetree/bindings/media/renesas,fdp1.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/renesas,fdp1.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas R-Car Fine Display Processor (FDP1) + +maintainers: + - Laurent Pinchart <laurent.pinchart@ideasonboard.com> + +description: + The FDP1 is a de-interlacing module which converts interlaced video to + progressive video. It is capable of performing pixel format conversion + between YCbCr/YUV formats and RGB formats. Only YCbCr/YUV formats are + supported as an input to the module. + +properties: + compatible: + enum: + - renesas,fdp1 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + + renesas,fcp: + $ref: /schemas/types.yaml#/definitions/phandle + description: + A phandle referencing the FCP that handles memory accesses for the FDP1. + Not allowed on R-Car Gen2, mandatory on R-Car Gen3. + +required: + - compatible + - reg + - interrupts + - clocks + - power-domains + - resets + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/renesas-cpg-mssr.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/r8a7795-sysc.h> + + fdp1@fe940000 { + compatible = "renesas,fdp1"; + reg = <0xfe940000 0x2400>; + interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 119>; + power-domains = <&sysc R8A7795_PD_A3VP>; + resets = <&cpg 119>; + renesas,fcp = <&fcpf0>; + }; +... diff --git a/Documentation/devicetree/bindings/media/renesas,vsp1.txt b/Documentation/devicetree/bindings/media/renesas,vsp1.txt deleted file mode 100644 index cd5a955b2ea0..000000000000 --- a/Documentation/devicetree/bindings/media/renesas,vsp1.txt +++ /dev/null @@ -1,30 +0,0 @@ -* Renesas VSP Video Processing Engine - -The VSP is a video processing engine that supports up-/down-scaling, alpha -blending, color space conversion and various other image processing features. -It can be found in the Renesas R-Car Gen2, R-Car Gen3, RZ/G1, and RZ/G2 SoCs. - -Required properties: - - - compatible: Must contain one of the following values - - "renesas,vsp1" for the R-Car Gen2 and RZ/G1 VSP1 - - "renesas,vsp2" for the R-Car Gen3 and RZ/G2 VSP2 - - - reg: Base address and length of the registers block for the VSP. - - interrupts: VSP interrupt specifier. - - clocks: A phandle + clock-specifier pair for the VSP functional clock. - -Optional properties: - - - renesas,fcp: A phandle referencing the FCP that handles memory accesses - for the VSP. Not needed on Gen2, mandatory on Gen3. - - -Example: R8A7790 (R-Car H2) VSP1-S node - - vsp@fe928000 { - compatible = "renesas,vsp1"; - reg = <0 0xfe928000 0 0x8000>; - interrupts = <0 267 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp1_clks R8A7790_CLK_VSP1_S>; - }; diff --git a/Documentation/devicetree/bindings/media/renesas,vsp1.yaml b/Documentation/devicetree/bindings/media/renesas,vsp1.yaml new file mode 100644 index 000000000000..990e9c1dbc43 --- /dev/null +++ b/Documentation/devicetree/bindings/media/renesas,vsp1.yaml @@ -0,0 +1,97 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/renesas,vsp1.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas VSP Video Processing Engine + +maintainers: + - Laurent Pinchart <laurent.pinchart@ideasonboard.com> + +description: + The VSP is a video processing engine that supports up-/down-scaling, alpha + blending, color space conversion and various other image processing features. + It can be found in the Renesas R-Car Gen2, R-Car Gen3, RZ/G1, and RZ/G2 SoCs. + +properties: + compatible: + enum: + - renesas,vsp1 # R-Car Gen2 and RZ/G1 + - renesas,vsp2 # R-Car Gen3 and RZ/G2 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + + renesas,fcp: + $ref: /schemas/types.yaml#/definitions/phandle + description: + A phandle referencing the FCP that handles memory accesses for the VSP. + +required: + - compatible + - reg + - interrupts + - clocks + - power-domains + - resets + +additionalProperties: false + +if: + properties: + compatible: + items: + - const: renesas,vsp1 +then: + properties: + renesas,fcp: false +else: + required: + - renesas,fcp + +examples: + # R8A7790 (R-Car H2) VSP1-S + - | + #include <dt-bindings/clock/renesas-cpg-mssr.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/r8a7790-sysc.h> + + vsp@fe928000 { + compatible = "renesas,vsp1"; + reg = <0xfe928000 0x8000>; + interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 131>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 131>; + }; + + # R8A77951 (R-Car H3) VSP2-BC + - | + #include <dt-bindings/clock/renesas-cpg-mssr.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/r8a7795-sysc.h> + + vsp@fe920000 { + compatible = "renesas,vsp2"; + reg = <0xfe920000 0x8000>; + interrupts = <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 624>; + power-domains = <&sysc R8A7795_PD_A3VP>; + resets = <&cpg 624>; + + renesas,fcp = <&fcpvb1>; + }; +... diff --git a/Documentation/devicetree/bindings/media/xilinx/xlnx,csi2rxss.yaml b/Documentation/devicetree/bindings/media/xilinx/xlnx,csi2rxss.yaml new file mode 100644 index 000000000000..7b9407c0520e --- /dev/null +++ b/Documentation/devicetree/bindings/media/xilinx/xlnx,csi2rxss.yaml @@ -0,0 +1,237 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/xilinx/xlnx,csi2rxss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Xilinx MIPI CSI-2 Receiver Subsystem + +maintainers: + - Vishal Sagar <vishal.sagar@xilinx.com> + +description: | + The Xilinx MIPI CSI-2 Receiver Subsystem is used to capture MIPI CSI-2 + traffic from compliant camera sensors and send the output as AXI4 Stream + video data for image processing. + The subsystem consists of a MIPI D-PHY in slave mode which captures the + data packets. This is passed along the MIPI CSI-2 Rx IP which extracts the + packet data. The optional Video Format Bridge (VFB) converts this data to + AXI4 Stream video data. + For more details, please refer to PG232 Xilinx MIPI CSI-2 Receiver Subsystem. + Please note that this bindings includes only the MIPI CSI-2 Rx controller + and Video Format Bridge and not D-PHY. + +properties: + compatible: + items: + - enum: + - xlnx,mipi-csi2-rx-subsystem-5.0 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + description: List of clock specifiers + items: + - description: AXI Lite clock + - description: Video clock + + clock-names: + items: + - const: lite_aclk + - const: video_aclk + + xlnx,csi-pxl-format: + description: | + This denotes the CSI Data type selected in hw design. + Packets other than this data type (except for RAW8 and + User defined data types) will be filtered out. + Possible values are as below - + 0x1e - YUV4228B + 0x1f - YUV42210B + 0x20 - RGB444 + 0x21 - RGB555 + 0x22 - RGB565 + 0x23 - RGB666 + 0x24 - RGB888 + 0x28 - RAW6 + 0x29 - RAW7 + 0x2a - RAW8 + 0x2b - RAW10 + 0x2c - RAW12 + 0x2d - RAW14 + 0x2e - RAW16 + 0x2f - RAW20 + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - anyOf: + - minimum: 0x1e + - maximum: 0x24 + - minimum: 0x28 + - maximum: 0x2f + + xlnx,vfb: + type: boolean + description: Present when Video Format Bridge is enabled in IP configuration + + xlnx,en-csi-v2-0: + type: boolean + description: Present if CSI v2 is enabled in IP configuration. + + xlnx,en-vcx: + type: boolean + description: | + When present, there are maximum 16 virtual channels, else only 4. + + xlnx,en-active-lanes: + type: boolean + description: | + Present if the number of active lanes can be re-configured at + runtime in the Protocol Configuration Register. Otherwise all lanes, + as set in IP configuration, are always active. + + video-reset-gpios: + description: Optional specifier for a GPIO that asserts video_aresetn. + maxItems: 1 + + ports: + type: object + + properties: + port@0: + type: object + description: | + Input / sink port node, single endpoint describing the + CSI-2 transmitter. + + properties: + reg: + const: 0 + + endpoint: + type: object + + properties: + + data-lanes: + description: | + This is required only in the sink port 0 endpoint which + connects to MIPI CSI-2 source like sensor. + The possible values are - + 1 - For 1 lane enabled in IP. + 1 2 - For 2 lanes enabled in IP. + 1 2 3 - For 3 lanes enabled in IP. + 1 2 3 4 - For 4 lanes enabled in IP. + items: + - const: 1 + - const: 2 + - const: 3 + - const: 4 + + remote-endpoint: true + + required: + - data-lanes + - remote-endpoint + + additionalProperties: false + + additionalProperties: false + + port@1: + type: object + description: | + Output / source port node, endpoint describing modules + connected the CSI-2 receiver. + + properties: + + reg: + const: 1 + + endpoint: + type: object + + properties: + + remote-endpoint: true + + required: + - remote-endpoint + + additionalProperties: false + + additionalProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - ports + +allOf: + - if: + required: + - xlnx,vfb + then: + required: + - xlnx,csi-pxl-format + else: + properties: + xlnx,csi-pxl-format: false + + - if: + not: + required: + - xlnx,en-csi-v2-0 + then: + properties: + xlnx,en-vcx: false + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + xcsi2rxss_1: csi2rx@a0020000 { + compatible = "xlnx,mipi-csi2-rx-subsystem-5.0"; + reg = <0xa0020000 0x10000>; + interrupt-parent = <&gic>; + interrupts = <0 95 4>; + xlnx,csi-pxl-format = <0x2a>; + xlnx,vfb; + xlnx,en-active-lanes; + xlnx,en-csi-v2-0; + xlnx,en-vcx; + clock-names = "lite_aclk", "video_aclk"; + clocks = <&misc_clk_0>, <&misc_clk_1>; + video-reset-gpios = <&gpio 86 GPIO_ACTIVE_LOW>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + /* Sink port */ + reg = <0>; + csiss_in: endpoint { + data-lanes = <1 2 3 4>; + /* MIPI CSI-2 Camera handle */ + remote-endpoint = <&camera_out>; + }; + }; + port@1 { + /* Source port */ + reg = <1>; + csiss_out: endpoint { + remote-endpoint = <&vproc_in>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index 403c17a3ff9b..f3d847832fdc 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -473,6 +473,8 @@ patternProperties: description: ILI Technology Corporation (ILITEK) "^img,.*": description: Imagination Technologies Ltd. + "^imi,.*": + description: Integrated Micro-Electronics Inc. "^incircuit,.*": description: In-Circuit GmbH "^inet-tek,.*": |