diff options
Diffstat (limited to 'Documentation/devicetree/bindings/powerpc')
4 files changed, 152 insertions, 284 deletions
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/dma.txt b/Documentation/devicetree/bindings/powerpc/fsl/dma.txt deleted file mode 100644 index c11ad5c6db21..000000000000 --- a/Documentation/devicetree/bindings/powerpc/fsl/dma.txt +++ /dev/null @@ -1,204 +0,0 @@ -* Freescale DMA Controllers - -** Freescale Elo DMA Controller - This is a little-endian 4-channel DMA controller, used in Freescale mpc83xx - series chips such as mpc8315, mpc8349, mpc8379 etc. - -Required properties: - -- compatible : must include "fsl,elo-dma" -- reg : DMA General Status Register, i.e. DGSR which contains - status for all the 4 DMA channels -- ranges : describes the mapping between the address space of the - DMA channels and the address space of the DMA controller -- cell-index : controller index. 0 for controller @ 0x8100 -- interrupts : interrupt specifier for DMA IRQ - -- DMA channel nodes: - - compatible : must include "fsl,elo-dma-channel" - However, see note below. - - reg : DMA channel specific registers - - cell-index : DMA channel index starts at 0. - -Optional properties: - - interrupts : interrupt specifier for DMA channel IRQ - (on 83xx this is expected to be identical to - the interrupts property of the parent node) - -Example: - dma@82a8 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc8349-dma", "fsl,elo-dma"; - reg = <0x82a8 4>; - ranges = <0 0x8100 0x1a4>; - interrupt-parent = <&ipic>; - interrupts = <71 8>; - cell-index = <0>; - dma-channel@0 { - compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel"; - cell-index = <0>; - reg = <0 0x80>; - interrupt-parent = <&ipic>; - interrupts = <71 8>; - }; - dma-channel@80 { - compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel"; - cell-index = <1>; - reg = <0x80 0x80>; - interrupt-parent = <&ipic>; - interrupts = <71 8>; - }; - dma-channel@100 { - compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel"; - cell-index = <2>; - reg = <0x100 0x80>; - interrupt-parent = <&ipic>; - interrupts = <71 8>; - }; - dma-channel@180 { - compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel"; - cell-index = <3>; - reg = <0x180 0x80>; - interrupt-parent = <&ipic>; - interrupts = <71 8>; - }; - }; - -** Freescale EloPlus DMA Controller - This is a 4-channel DMA controller with extended addresses and chaining, - mainly used in Freescale mpc85xx/86xx, Pxxx and BSC series chips, such as - mpc8540, mpc8641 p4080, bsc9131 etc. - -Required properties: - -- compatible : must include "fsl,eloplus-dma" -- reg : DMA General Status Register, i.e. DGSR which contains - status for all the 4 DMA channels -- cell-index : controller index. 0 for controller @ 0x21000, - 1 for controller @ 0xc000 -- ranges : describes the mapping between the address space of the - DMA channels and the address space of the DMA controller - -- DMA channel nodes: - - compatible : must include "fsl,eloplus-dma-channel" - However, see note below. - - cell-index : DMA channel index starts at 0. - - reg : DMA channel specific registers - - interrupts : interrupt specifier for DMA channel IRQ - -Example: - dma@21300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc8540-dma", "fsl,eloplus-dma"; - reg = <0x21300 4>; - ranges = <0 0x21100 0x200>; - cell-index = <0>; - dma-channel@0 { - compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel"; - reg = <0 0x80>; - cell-index = <0>; - interrupt-parent = <&mpic>; - interrupts = <20 2>; - }; - dma-channel@80 { - compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupt-parent = <&mpic>; - interrupts = <21 2>; - }; - dma-channel@100 { - compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupt-parent = <&mpic>; - interrupts = <22 2>; - }; - dma-channel@180 { - compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupt-parent = <&mpic>; - interrupts = <23 2>; - }; - }; - -** Freescale Elo3 DMA Controller - DMA controller which has same function as EloPlus except that Elo3 has 8 - channels while EloPlus has only 4, it is used in Freescale Txxx and Bxxx - series chips, such as t1040, t4240, b4860. - -Required properties: - -- compatible : must include "fsl,elo3-dma" -- reg : contains two entries for DMA General Status Registers, - i.e. DGSR0 which includes status for channel 1~4, and - DGSR1 for channel 5~8 -- ranges : describes the mapping between the address space of the - DMA channels and the address space of the DMA controller - -- DMA channel nodes: - - compatible : must include "fsl,eloplus-dma-channel" - - reg : DMA channel specific registers - - interrupts : interrupt specifier for DMA channel IRQ - -Example: -dma@100300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,elo3-dma"; - reg = <0x100300 0x4>, - <0x100600 0x4>; - ranges = <0x0 0x100100 0x500>; - dma-channel@0 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x0 0x80>; - interrupts = <28 2 0 0>; - }; - dma-channel@80 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - interrupts = <29 2 0 0>; - }; - dma-channel@100 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - interrupts = <30 2 0 0>; - }; - dma-channel@180 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - interrupts = <31 2 0 0>; - }; - dma-channel@300 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x300 0x80>; - interrupts = <76 2 0 0>; - }; - dma-channel@380 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x380 0x80>; - interrupts = <77 2 0 0>; - }; - dma-channel@400 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x400 0x80>; - interrupts = <78 2 0 0>; - }; - dma-channel@480 { - compatible = "fsl,eloplus-dma-channel"; - reg = <0x480 0x80>; - interrupts = <79 2 0 0>; - }; -}; - -Note on DMA channel compatible properties: The compatible property must say -"fsl,elo-dma-channel" or "fsl,eloplus-dma-channel" to be used by the Elo DMA -driver (fsldma). Any DMA channel used by fsldma cannot be used by another -DMA driver, such as the SSI sound drivers for the MPC8610. Therefore, any DMA -channel that should be used for another driver should not use -"fsl,elo-dma-channel" or "fsl,eloplus-dma-channel". For the SSI drivers, for -example, the compatible property should be "fsl,ssi-dma-channel". See ssi.txt -for more information. diff --git a/Documentation/devicetree/bindings/powerpc/fsl/mcu-mpc8349emitx.txt b/Documentation/devicetree/bindings/powerpc/fsl/mcu-mpc8349emitx.txt deleted file mode 100644 index 37f91fa57654..000000000000 --- a/Documentation/devicetree/bindings/powerpc/fsl/mcu-mpc8349emitx.txt +++ /dev/null @@ -1,17 +0,0 @@ -Freescale MPC8349E-mITX-compatible Power Management Micro Controller Unit (MCU) - -Required properties: -- compatible : "fsl,<mcu-chip>-<board>", "fsl,mcu-mpc8349emitx". -- reg : should specify I2C address (0x0a). -- #gpio-cells : should be 2. -- gpio-controller : should be present. - -Example: - -mcu@a { - #gpio-cells = <2>; - compatible = "fsl,mc9s08qg8-mpc8349emitx", - "fsl,mcu-mpc8349emitx"; - reg = <0x0a>; - gpio-controller; -}; diff --git a/Documentation/devicetree/bindings/powerpc/fsl/pmc.txt b/Documentation/devicetree/bindings/powerpc/fsl/pmc.txt deleted file mode 100644 index 07256b7ffcaa..000000000000 --- a/Documentation/devicetree/bindings/powerpc/fsl/pmc.txt +++ /dev/null @@ -1,63 +0,0 @@ -* Power Management Controller - -Properties: -- compatible: "fsl,<chip>-pmc". - - "fsl,mpc8349-pmc" should be listed for any chip whose PMC is - compatible. "fsl,mpc8313-pmc" should also be listed for any chip - whose PMC is compatible, and implies deep-sleep capability. - - "fsl,mpc8548-pmc" should be listed for any chip whose PMC is - compatible. "fsl,mpc8536-pmc" should also be listed for any chip - whose PMC is compatible, and implies deep-sleep capability. - - "fsl,mpc8641d-pmc" should be listed for any chip whose PMC is - compatible; all statements below that apply to "fsl,mpc8548-pmc" also - apply to "fsl,mpc8641d-pmc". - - Compatibility does not include bit assignments in SCCR/PMCDR/DEVDISR; these - bit assignments are indicated via the sleep specifier in each device's - sleep property. - -- reg: For devices compatible with "fsl,mpc8349-pmc", the first resource - is the PMC block, and the second resource is the Clock Configuration - block. - - For devices compatible with "fsl,mpc8548-pmc", the first resource - is a 32-byte block beginning with DEVDISR. - -- interrupts: For "fsl,mpc8349-pmc"-compatible devices, the first - resource is the PMC block interrupt. - -- fsl,mpc8313-wakeup-timer: For "fsl,mpc8313-pmc"-compatible devices, - this is a phandle to an "fsl,gtm" node on which timer 4 can be used as - a wakeup source from deep sleep. - -Sleep specifiers: - - fsl,mpc8349-pmc: Sleep specifiers consist of one cell. For each bit - that is set in the cell, the corresponding bit in SCCR will be saved - and cleared on suspend, and restored on resume. This sleep controller - supports disabling and resuming devices at any time. - - fsl,mpc8536-pmc: Sleep specifiers consist of three cells, the third of - which will be ORed into PMCDR upon suspend, and cleared from PMCDR - upon resume. The first two cells are as described for fsl,mpc8578-pmc. - This sleep controller only supports disabling devices during system - sleep, or permanently. - - fsl,mpc8548-pmc: Sleep specifiers consist of one or two cells, the - first of which will be ORed into DEVDISR (and the second into - DEVDISR2, if present -- this cell should be zero or absent if the - hardware does not have DEVDISR2) upon a request for permanent device - disabling. This sleep controller does not support configuring devices - to disable during system sleep (unless supported by another compatible - match), or dynamically. - -Example: - - power@b00 { - compatible = "fsl,mpc8313-pmc", "fsl,mpc8349-pmc"; - reg = <0xb00 0x100 0xa00 0x100>; - interrupts = <80 8>; - }; diff --git a/Documentation/devicetree/bindings/powerpc/fsl/pmc.yaml b/Documentation/devicetree/bindings/powerpc/fsl/pmc.yaml new file mode 100644 index 000000000000..276ece7f01db --- /dev/null +++ b/Documentation/devicetree/bindings/powerpc/fsl/pmc.yaml @@ -0,0 +1,152 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/powerpc/fsl/pmc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Power Management Controller + +maintainers: + - J. Neuschäfer <j.ne@posteo.net> + +description: | + The Power Management Controller in several MPC8xxx SoCs helps save power by + controlling chip-wide low-power states as well as peripheral clock gating. + + Sleep of peripheral devices is configured by the `sleep` property, for + example `sleep = <&pmc 0x00000030>`. Any cells after the &pmc phandle are + called a sleep specifier. + + For "fsl,mpc8349-pmc", sleep specifiers consist of one cell. For each bit that + is set in the cell, the corresponding bit in SCCR will be saved and cleared + on suspend, and restored on resume. This sleep controller supports disabling + and resuming devices at any time. + + For "fsl,mpc8536-pmc", sleep specifiers consist of three cells, the third of + which will be ORed into PMCDR upon suspend, and cleared from PMCDR upon + resume. The first two cells are as described for fsl,mpc8548-pmc. This + sleep controller only supports disabling devices during system sleep, or + permanently. + + For "fsl,mpc8548-pmc" or "fsl,mpc8641d-pmc", Sleep specifiers consist of one + or two cells, the first of which will be ORed into DEVDISR (and the second + into DEVDISR2, if present -- this cell should be zero or absent if the + hardware does not have DEVDISR2) upon a request for permanent device + disabling. This sleep controller does not support configuring devices to + disable during system sleep (unless supported by another compatible match), + or dynamically. + +properties: + compatible: + oneOf: + - items: + - const: fsl,mpc8315-pmc + - const: fsl,mpc8313-pmc + - const: fsl,mpc8349-pmc + + - items: + - enum: + - fsl,mpc8313-pmc + - fsl,mpc8323-pmc + - fsl,mpc8360-pmc + - fsl,mpc8377-pmc + - fsl,mpc8378-pmc + - fsl,mpc8379-pmc + - const: fsl,mpc8349-pmc + + - items: + - const: fsl,p1022-pmc + - const: fsl,mpc8536-pmc + - const: fsl,mpc8548-pmc + + - items: + - enum: + - fsl,mpc8536-pmc + - fsl,mpc8568-pmc + - fsl,mpc8569-pmc + - const: fsl,mpc8548-pmc + + - enum: + - fsl,mpc8548-pmc + - fsl,mpc8641d-pmc + + description: | + "fsl,mpc8349-pmc" should be listed for any chip whose PMC is + compatible. "fsl,mpc8313-pmc" should also be listed for any chip + whose PMC is compatible, and implies deep-sleep capability. + + "fsl,mpc8548-pmc" should be listed for any chip whose PMC is + compatible. "fsl,mpc8536-pmc" should also be listed for any chip + whose PMC is compatible, and implies deep-sleep capability. + + "fsl,mpc8641d-pmc" should be listed for any chip whose PMC is + compatible; all statements below that apply to "fsl,mpc8548-pmc" also + apply to "fsl,mpc8641d-pmc". + + Compatibility does not include bit assignments in SCCR/PMCDR/DEVDISR; these + bit assignments are indicated via the sleep specifier in each device's + sleep property. + + reg: + minItems: 1 + maxItems: 2 + + interrupts: + maxItems: 1 + + fsl,mpc8313-wakeup-timer: + $ref: /schemas/types.yaml#/definitions/phandle + description: + For "fsl,mpc8313-pmc"-compatible devices, this is a phandle to an + "fsl,gtm" node on which timer 4 can be used as a wakeup source from deep + sleep. + +allOf: + - if: + properties: + compatible: + contains: + const: fsl,mpc8349-pmc + then: + properties: + reg: + items: + - description: PMC block + - description: Clock Configuration block + + - if: + properties: + compatible: + contains: + enum: + - fsl,mpc8548-pmc + - fsl,mpc8641d-pmc + then: + properties: + reg: + items: + - description: 32-byte block beginning with DEVDISR + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + pmc: power@b00 { + compatible = "fsl,mpc8377-pmc", "fsl,mpc8349-pmc"; + reg = <0xb00 0x100>, <0xa00 0x100>; + interrupts = <80 IRQ_TYPE_LEVEL_LOW>; + }; + + - | + power@e0070 { + compatible = "fsl,mpc8548-pmc"; + reg = <0xe0070 0x20>; + }; + +... |