diff options
Diffstat (limited to 'Documentation/devicetree/bindings/net')
9 files changed, 70 insertions, 91 deletions
diff --git a/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml b/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml index 7a784dc4e513..798fa5fb7bb2 100644 --- a/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml +++ b/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml @@ -76,36 +76,35 @@ properties: Please refer to 2.4.1 Message RAM Configuration in Bosch M_CAN user manual for details. - allOf: - - $ref: /schemas/types.yaml#/definitions/int32-array - - items: - items: - - description: The 'offset' is an address offset of the Message RAM - where the following elements start from. This is usually - set to 0x0 if you're using a private Message RAM. - default: 0 - - description: 11-bit Filter 0-128 elements / 0-128 words - minimum: 0 - maximum: 128 - - description: 29-bit Filter 0-64 elements / 0-128 words - minimum: 0 - maximum: 64 - - description: Rx FIFO 0 0-64 elements / 0-1152 words - minimum: 0 - maximum: 64 - - description: Rx FIFO 1 0-64 elements / 0-1152 words - minimum: 0 - maximum: 64 - - description: Rx Buffers 0-64 elements / 0-1152 words - minimum: 0 - maximum: 64 - - description: Tx Event FIFO 0-32 elements / 0-64 words - minimum: 0 - maximum: 32 - - description: Tx Buffers 0-32 elements / 0-576 words - minimum: 0 - maximum: 32 - maxItems: 1 + $ref: /schemas/types.yaml#/definitions/int32-array + items: + items: + - description: The 'offset' is an address offset of the Message RAM where + the following elements start from. This is usually set to 0x0 if + you're using a private Message RAM. + default: 0 + - description: 11-bit Filter 0-128 elements / 0-128 words + minimum: 0 + maximum: 128 + - description: 29-bit Filter 0-64 elements / 0-128 words + minimum: 0 + maximum: 64 + - description: Rx FIFO 0 0-64 elements / 0-1152 words + minimum: 0 + maximum: 64 + - description: Rx FIFO 1 0-64 elements / 0-1152 words + minimum: 0 + maximum: 64 + - description: Rx Buffers 0-64 elements / 0-1152 words + minimum: 0 + maximum: 64 + - description: Tx Event FIFO 0-32 elements / 0-64 words + minimum: 0 + maximum: 32 + - description: Tx Buffers 0-32 elements / 0-576 words + minimum: 0 + maximum: 32 + maxItems: 1 can-transceiver: $ref: can-transceiver.yaml# diff --git a/Documentation/devicetree/bindings/net/ethernet-controller.yaml b/Documentation/devicetree/bindings/net/ethernet-controller.yaml index ac471b60ed6a..1c4474036d46 100644 --- a/Documentation/devicetree/bindings/net/ethernet-controller.yaml +++ b/Documentation/devicetree/bindings/net/ethernet-controller.yaml @@ -14,25 +14,23 @@ properties: pattern: "^ethernet(@.*)?$" local-mac-address: - allOf: - - $ref: /schemas/types.yaml#definitions/uint8-array - - items: - - minItems: 6 - maxItems: 6 description: Specifies the MAC address that was assigned to the network device. + $ref: /schemas/types.yaml#definitions/uint8-array + items: + - minItems: 6 + maxItems: 6 mac-address: - allOf: - - $ref: /schemas/types.yaml#definitions/uint8-array - - items: - - minItems: 6 - maxItems: 6 description: Specifies the MAC address that was last used by the boot program; should be used in cases where the MAC address assigned to the device by the boot program is different from the local-mac-address property. + $ref: /schemas/types.yaml#definitions/uint8-array + items: + - minItems: 6 + maxItems: 6 max-frame-size: $ref: /schemas/types.yaml#definitions/uint32 @@ -133,15 +131,14 @@ properties: is used for components that can have configurable fifo sizes. managed: - allOf: - - $ref: /schemas/types.yaml#definitions/string - - default: auto - enum: - - auto - - in-band-status description: Specifies the PHY management type. If auto is set and fixed-link is not specified, it uses MDIO for management. + $ref: /schemas/types.yaml#definitions/string + default: auto + enum: + - auto + - in-band-status fixed-link: allOf: @@ -183,11 +180,10 @@ properties: then: properties: speed: - allOf: - - $ref: /schemas/types.yaml#definitions/uint32 - - enum: [10, 100, 1000] description: Link speed. + $ref: /schemas/types.yaml#definitions/uint32 + enum: [10, 100, 1000] full-duplex: $ref: /schemas/types.yaml#definitions/flag diff --git a/Documentation/devicetree/bindings/net/qca,ar803x.yaml b/Documentation/devicetree/bindings/net/qca,ar803x.yaml index 5a6c9d20c0ba..1788884b8c28 100644 --- a/Documentation/devicetree/bindings/net/qca,ar803x.yaml +++ b/Documentation/devicetree/bindings/net/qca,ar803x.yaml @@ -20,15 +20,13 @@ allOf: properties: qca,clk-out-frequency: description: Clock output frequency in Hertz. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 25000000, 50000000, 62500000, 125000000 ] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [25000000, 50000000, 62500000, 125000000] qca,clk-out-strength: description: Clock output driver strength. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [ 0, 1, 2 ] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2] qca,keep-pll-enabled: description: | @@ -52,17 +50,14 @@ properties: type: object description: Initial data for the VDDIO regulator. Set this to 1.5V or 1.8V. - allOf: - - $ref: /schemas/regulator/regulator.yaml + $ref: /schemas/regulator/regulator.yaml vddh-regulator: type: object description: Dummy subnode to model the external connection of the PHY VDDH regulator to VDDIO. - allOf: - - $ref: /schemas/regulator/regulator.yaml - + $ref: /schemas/regulator/regulator.yaml examples: - | diff --git a/Documentation/devicetree/bindings/net/qcom,ipa.yaml b/Documentation/devicetree/bindings/net/qcom,ipa.yaml index 140f15245654..1ef3087eb7b2 100644 --- a/Documentation/devicetree/bindings/net/qcom,ipa.yaml +++ b/Documentation/devicetree/bindings/net/qcom,ipa.yaml @@ -87,16 +87,14 @@ properties: - const: config qcom,smem-states: - allOf: - - $ref: /schemas/types.yaml#/definitions/phandle-array + $ref: /schemas/types.yaml#/definitions/phandle-array description: State bits used in by the AP to signal the modem. items: - description: Whether the "ipa-clock-enabled" state bit is valid - description: Whether the IPA clock is enabled (if valid) qcom,smem-state-names: - allOf: - - $ref: /schemas/types.yaml#/definitions/string-array + $ref: /schemas/types.yaml#/definitions/string-array description: The names of the state bits used for SMP2P output items: - const: ipa-clock-enabled-valid diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml index 439115b7663c..30a1efd26626 100644 --- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml +++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml @@ -204,14 +204,13 @@ properties: snps,reset-delays-us: deprecated: true - allOf: - - $ref: /schemas/types.yaml#definitions/uint32-array - - minItems: 3 - maxItems: 3 description: Triplet of delays. The 1st cell is reset pre-delay in micro seconds. The 2nd cell is reset pulse in micro seconds. The 3rd cell is reset post-delay in micro seconds. + $ref: /schemas/types.yaml#definitions/uint32-array + minItems: 3 + maxItems: 3 snps,aal: $ref: /schemas/types.yaml#definitions/flag @@ -306,27 +305,24 @@ allOf: then: properties: snps,pbl: - allOf: - - $ref: /schemas/types.yaml#definitions/uint32 - - enum: [2, 4, 8] description: Programmable Burst Length (tx and rx) + $ref: /schemas/types.yaml#definitions/uint32 + enum: [2, 4, 8] snps,txpbl: - allOf: - - $ref: /schemas/types.yaml#definitions/uint32 - - enum: [2, 4, 8] description: Tx Programmable Burst Length. If set, DMA tx will use this value rather than snps,pbl. + $ref: /schemas/types.yaml#definitions/uint32 + enum: [2, 4, 8] snps,rxpbl: - allOf: - - $ref: /schemas/types.yaml#definitions/uint32 - - enum: [2, 4, 8] description: Rx Programmable Burst Length. If set, DMA rx will use this value rather than snps,pbl. + $ref: /schemas/types.yaml#definitions/uint32 + enum: [2, 4, 8] snps,no-pbl-x8: $ref: /schemas/types.yaml#definitions/flag diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml index 2207910ee79b..fafa34cebdb1 100644 --- a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml +++ b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml @@ -66,8 +66,7 @@ properties: - eth-ck st,syscon: - allOf: - - $ref: "/schemas/types.yaml#/definitions/phandle-array" + $ref: "/schemas/types.yaml#/definitions/phandle-array" description: Should be phandle/offset pair. The phandle to the syscon node which encompases the glue register, and the offset of the control register diff --git a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml index 8fc8d3be303b..3ea0e1290dbb 100644 --- a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml +++ b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml @@ -105,8 +105,7 @@ properties: description: label associated with this port ti,dual-emac-pvid: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 1 maximum: 1024 description: @@ -150,10 +149,9 @@ properties: patternProperties: "^mdio@": type: object - allOf: - - $ref: "ti,davinci-mdio.yaml#" description: CPSW MDIO bus. + $ref: "ti,davinci-mdio.yaml#" required: diff --git a/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml b/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml index 2ea14ab29254..d454c1fab930 100644 --- a/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml +++ b/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml @@ -40,10 +40,9 @@ properties: ti,hwmods: description: TI hwmod name deprecated: true - allOf: - - $ref: /schemas/types.yaml#/definitions/string-array - - items: - const: davinci_mdio + $ref: /schemas/types.yaml#/definitions/string-array + items: + const: davinci_mdio if: properties: diff --git a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml index 78bf511e2892..e3e9393c91b7 100644 --- a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml +++ b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml @@ -103,8 +103,7 @@ properties: type: object description: CPSW2G NUSS external ports - allOf: - - $ref: ethernet-controller.yaml# + $ref: ethernet-controller.yaml# properties: reg: @@ -139,8 +138,8 @@ properties: patternProperties: "^mdio@[0-9a-f]+$": type: object - allOf: - - $ref: "ti,davinci-mdio.yaml#" + $ref: "ti,davinci-mdio.yaml#" + description: CPSW MDIO bus. |