diff options
Diffstat (limited to 'Documentation/devicetree/bindings/net')
55 files changed, 2373 insertions, 297 deletions
diff --git a/Documentation/devicetree/bindings/net/aeonsemi,as21xxx.yaml b/Documentation/devicetree/bindings/net/aeonsemi,as21xxx.yaml new file mode 100644 index 000000000000..69eb29dc4d7b --- /dev/null +++ b/Documentation/devicetree/bindings/net/aeonsemi,as21xxx.yaml @@ -0,0 +1,122 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/aeonsemi,as21xxx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Aeonsemi AS21XXX Ethernet PHY + +maintainers: + - Christian Marangi <ansuelsmth@gmail.com> + +description: | + Aeonsemi AS21xxx Ethernet PHYs requires a firmware to be loaded to actually + work. The same firmware is compatible with various PHYs of the same family. + + A PHY with not firmware loaded will be exposed on the MDIO bus with ID + 0x7500 0x7500 or 0x7500 0x9410 on C45 registers. + + This can be done and is implemented by OEM in 2 different way: + - Attached SPI flash directly to the PHY with the firmware. The PHY + will self load the firmware in the presence of this configuration. + - Manually provided firmware loaded from a file in the filesystem. + + Each PHY can support up to 5 LEDs. + + AS2xxx PHY Name logic: + + AS21x1xxB1 + ^ ^^ + | |J: Supports SyncE/PTP + | |P: No SyncE/PTP support + | 1: Supports 2nd Serdes + | 2: Not 2nd Serdes support + 0: 10G, 5G, 2.5G + 5: 5G, 2.5G + 2: 2.5G + +allOf: + - $ref: ethernet-phy.yaml# + +select: + properties: + compatible: + contains: + enum: + - ethernet-phy-id7500.9410 + - ethernet-phy-id7500.9402 + - ethernet-phy-id7500.9412 + - ethernet-phy-id7500.9422 + - ethernet-phy-id7500.9432 + - ethernet-phy-id7500.9442 + - ethernet-phy-id7500.9452 + - ethernet-phy-id7500.9462 + - ethernet-phy-id7500.9472 + - ethernet-phy-id7500.9482 + - ethernet-phy-id7500.9492 + required: + - compatible + +properties: + reg: + maxItems: 1 + + firmware-name: + description: specify the name of PHY firmware to load + maxItems: 1 + +required: + - compatible + - reg + +if: + properties: + compatible: + contains: + const: ethernet-phy-id7500.9410 +then: + required: + - firmware-name +else: + properties: + firmware-name: false + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/leds/common.h> + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethernet-phy@1f { + compatible = "ethernet-phy-id7500.9410", + "ethernet-phy-ieee802.3-c45"; + + reg = <31>; + firmware-name = "as21x1x_fw.bin"; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_LAN; + function-enumerator = <0>; + default-state = "keep"; + }; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_LAN; + function-enumerator = <1>; + default-state = "keep"; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/airoha,en7581-eth.yaml b/Documentation/devicetree/bindings/net/airoha,en7581-eth.yaml index c578637c5826..6d22131ac2f9 100644 --- a/Documentation/devicetree/bindings/net/airoha,en7581-eth.yaml +++ b/Documentation/devicetree/bindings/net/airoha,en7581-eth.yaml @@ -57,12 +57,30 @@ properties: - const: hsi-mac - const: xfp-mac + memory-region: + items: + - description: QDMA0 buffer memory + - description: QDMA1 buffer memory + + memory-region-names: + items: + - const: qdma0-buf + - const: qdma1-buf + "#address-cells": const: 1 "#size-cells": const: 0 + airoha,npu: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the node used to configure the NPU module. + The Airoha Network Processor Unit (NPU) provides a configuration + interface to implement hardware flow offloading programming Packet + Processor Engine (PPE) flow table. + patternProperties: "^ethernet@[1-4]$": type: object @@ -132,6 +150,11 @@ examples: <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; + memory-region = <&qdma0_buf>, <&qdma1_buf>; + memory-region-names = "qdma0-buf", "qdma1-buf"; + + airoha,npu = <&npu>; + #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/net/airoha,en7581-npu.yaml b/Documentation/devicetree/bindings/net/airoha,en7581-npu.yaml new file mode 100644 index 000000000000..76dd97c3fb40 --- /dev/null +++ b/Documentation/devicetree/bindings/net/airoha,en7581-npu.yaml @@ -0,0 +1,84 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/airoha,en7581-npu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Airoha Network Processor Unit for EN7581 SoC + +maintainers: + - Lorenzo Bianconi <lorenzo@kernel.org> + +description: + The Airoha Network Processor Unit (NPU) provides a configuration interface + to implement wired and wireless hardware flow offloading programming Packet + Processor Engine (PPE) flow table. + +properties: + compatible: + enum: + - airoha,en7581-npu + + reg: + maxItems: 1 + + interrupts: + items: + - description: mbox host irq line + - description: watchdog0 irq line + - description: watchdog1 irq line + - description: watchdog2 irq line + - description: watchdog3 irq line + - description: watchdog4 irq line + - description: watchdog5 irq line + - description: watchdog6 irq line + - description: watchdog7 irq line + - description: wlan irq line0 + - description: wlan irq line1 + - description: wlan irq line2 + - description: wlan irq line3 + - description: wlan irq line4 + - description: wlan irq line5 + + memory-region: + maxItems: 1 + description: + Memory used to store NPU firmware binary. + +required: + - compatible + - reg + - interrupts + - memory-region + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + soc { + #address-cells = <2>; + #size-cells = <2>; + + npu@1e900000 { + compatible = "airoha,en7581-npu"; + reg = <0 0x1e900000 0 0x313000>; + interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; + memory-region = <&npu_binary>; + }; + }; diff --git a/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml b/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml index 7fe0352dff0f..7b6a2fde8175 100644 --- a/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml +++ b/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml @@ -23,6 +23,7 @@ properties: - allwinner,sun20i-d1-emac - allwinner,sun50i-h6-emac - allwinner,sun50i-h616-emac0 + - allwinner,sun55i-a523-emac0 - const: allwinner,sun50i-a64-emac reg: diff --git a/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml b/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml index 798a4c19f18c..0cd78d71768c 100644 --- a/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml +++ b/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml @@ -152,6 +152,12 @@ properties: The second range is is for the Amlogic specific configuration (for example the PRG_ETHERNET register range on Meson8b and newer) + interrupts: + maxItems: 1 + + interrupt-names: + const: macirq + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml b/Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml index 0a2d7baf5db3..3ab60c70286f 100644 --- a/Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml +++ b/Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml @@ -17,6 +17,9 @@ description: maintainers: - Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> +allOf: + - $ref: bluetooth-controller.yaml# + properties: compatible: enum: @@ -40,19 +43,49 @@ properties: Host-To-Chip power save mechanism is driven by this GPIO connected to BT_WAKE_IN pin of the NXP chipset. + nxp,wakein-pin: + $ref: /schemas/types.yaml#/definitions/uint8 + description: + The GPIO number of the NXP chipset used for BT_WAKE_IN. + + interrupts: + maxItems: 1 + description: + Host wakeup by falling edge interrupt on this pin which is + connected to BT_WAKE_OUT pin of the NXP chipset. + + interrupt-names: + items: + - const: wakeup + + wakeup-source: true + + nxp,wakeout-pin: + $ref: /schemas/types.yaml#/definitions/uint8 + description: + The GPIO number of the NXP chipset used for BT_WAKE_OUT. + required: - compatible -additionalProperties: false +unevaluatedProperties: false examples: - | #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> serial { bluetooth { compatible = "nxp,88w8987-bt"; fw-init-baudrate = <3000000>; firmware-name = "uartuart8987_bt_v0.bin"; device-wakeup-gpios = <&gpio 11 GPIO_ACTIVE_HIGH>; + nxp,wakein-pin = /bits/ 8 <18>; + nxp,wakeout-pin = /bits/ 8 <19>; + local-bd-address = [66 55 44 33 22 11]; + interrupt-parent = <&gpio>; + interrupts = <8 IRQ_TYPE_EDGE_FALLING>; + interrupt-names = "wakeup"; + wakeup-source; }; }; diff --git a/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml b/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml index a72152f7e29b..6353a336f382 100644 --- a/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml +++ b/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml @@ -19,6 +19,7 @@ properties: - qcom,qca2066-bt - qcom,qca6174-bt - qcom,qca9377-bt + - qcom,wcn3950-bt - qcom,wcn3988-bt - qcom,wcn3990-bt - qcom,wcn3991-bt @@ -138,6 +139,7 @@ allOf: compatible: contains: enum: + - qcom,wcn3950-bt - qcom,wcn3988-bt - qcom,wcn3990-bt - qcom,wcn3991-bt diff --git a/Documentation/devicetree/bindings/net/brcm,asp-v2.0.yaml b/Documentation/devicetree/bindings/net/brcm,asp-v2.0.yaml index 660e2ca42daf..a3db6d594c8c 100644 --- a/Documentation/devicetree/bindings/net/brcm,asp-v2.0.yaml +++ b/Documentation/devicetree/bindings/net/brcm,asp-v2.0.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/net/brcm,asp-v2.0.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Broadcom ASP 2.0 Ethernet controller +title: Broadcom ASP Ethernet controller maintainers: - Justin Chen <justin.chen@broadcom.com> @@ -17,16 +17,16 @@ properties: oneOf: - items: - enum: + - brcm,bcm74110-asp + - const: brcm,asp-v3.0 + - items: + - enum: - brcm,bcm74165b0-asp - const: brcm,asp-v2.2 - items: - enum: - brcm,bcm74165-asp - const: brcm,asp-v2.1 - - items: - - enum: - - brcm,bcm72165-asp - - const: brcm,asp-v2.0 "#address-cells": const: 1 @@ -39,11 +39,9 @@ properties: ranges: true interrupts: - minItems: 1 items: - description: RX/TX interrupt - - description: Port 0 Wake-on-LAN - - description: Port 1 Wake-on-LAN + - description: Wake-on-LAN interrupt clocks: maxItems: 1 @@ -106,16 +104,17 @@ examples: #include <dt-bindings/interrupt-controller/arm-gic.h> ethernet@9c00000 { - compatible = "brcm,bcm72165-asp", "brcm,asp-v2.0"; + compatible = "brcm,bcm74165-asp", "brcm,asp-v2.1"; reg = <0x9c00000 0x1fff14>; - interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&intc GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, + <&aon_pm_l2_intc 14>; ranges = <0x0 0x9c00000 0x1fff14>; clocks = <&scmi 14>; #address-cells = <1>; #size-cells = <1>; mdio@c614 { - compatible = "brcm,asp-v2.0-mdio"; + compatible = "brcm,asp-v2.1-mdio"; reg = <0xc614 0x8>; reg-names = "mdio"; #address-cells = <1>; @@ -127,7 +126,7 @@ examples: }; mdio@ce14 { - compatible = "brcm,asp-v2.0-mdio"; + compatible = "brcm,asp-v2.1-mdio"; reg = <0xce14 0x8>; reg-names = "mdio"; #address-cells = <1>; diff --git a/Documentation/devicetree/bindings/net/brcm,unimac-mdio.yaml b/Documentation/devicetree/bindings/net/brcm,unimac-mdio.yaml index 63bee5b542f5..43516dd357b8 100644 --- a/Documentation/devicetree/bindings/net/brcm,unimac-mdio.yaml +++ b/Documentation/devicetree/bindings/net/brcm,unimac-mdio.yaml @@ -22,9 +22,9 @@ properties: - brcm,genet-mdio-v3 - brcm,genet-mdio-v4 - brcm,genet-mdio-v5 - - brcm,asp-v2.0-mdio - brcm,asp-v2.1-mdio - brcm,asp-v2.2-mdio + - brcm,asp-v3.0-mdio - brcm,unimac-mdio - brcm,bcm6846-mdio diff --git a/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml b/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml index 97dd1a7c5ed2..f81d56f7c12a 100644 --- a/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml +++ b/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml @@ -10,9 +10,6 @@ title: maintainers: - Marc Kleine-Budde <mkl@pengutronix.de> -allOf: - - $ref: can-controller.yaml# - properties: compatible: oneOf: @@ -28,6 +25,7 @@ properties: - fsl,vf610-flexcan - fsl,ls1021ar2-flexcan - fsl,lx2160ar1-flexcan + - nxp,s32g2-flexcan - items: - enum: - fsl,imx53-flexcan @@ -43,12 +41,25 @@ properties: - enum: - fsl,ls1028ar1-flexcan - const: fsl,lx2160ar1-flexcan + - items: + - enum: + - nxp,s32g3-flexcan + - const: nxp,s32g2-flexcan + - items: + - enum: + - fsl,imx94-flexcan + - const: fsl,imx95-flexcan reg: maxItems: 1 interrupts: - maxItems: 1 + minItems: 1 + maxItems: 4 + + interrupt-names: + minItems: 1 + maxItems: 4 clocks: maxItems: 2 @@ -70,6 +81,9 @@ properties: xceiver-supply: description: Regulator that powers the CAN transceiver. + phys: + maxItems: 1 + big-endian: $ref: /schemas/types.yaml#/definitions/flag description: | @@ -136,6 +150,41 @@ required: - reg - interrupts +allOf: + - $ref: can-controller.yaml# + - if: + properties: + compatible: + contains: + const: nxp,s32g2-flexcan + then: + properties: + interrupts: + items: + - description: Message Buffer interrupt for mailboxes 0-7 and Enhanced RX FIFO + - description: Device state change + - description: Bus Error detection + - description: Message Buffer interrupt for mailboxes 8-127 + interrupt-names: + items: + - const: mb-0 + - const: state + - const: berr + - const: mb-1 + required: + - interrupt-names + else: + properties: + interrupts: + maxItems: 1 + interrupt-names: false + - if: + required: + - xceiver-supply + then: + properties: + phys: false + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/net/can/microchip,mcp2510.yaml b/Documentation/devicetree/bindings/net/can/microchip,mcp2510.yaml index e0ec53bc10c6..1525a50ded47 100644 --- a/Documentation/devicetree/bindings/net/can/microchip,mcp2510.yaml +++ b/Documentation/devicetree/bindings/net/can/microchip,mcp2510.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: http://devicetree.org/schemas/can/microchip,mcp2510.yaml# +$id: http://devicetree.org/schemas/net/can/microchip,mcp2510.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Microchip MCP251X stand-alone CAN controller diff --git a/Documentation/devicetree/bindings/net/can/microchip,mcp251xfd.yaml b/Documentation/devicetree/bindings/net/can/microchip,mcp251xfd.yaml index 2a98b26630cb..c155c9c6db39 100644 --- a/Documentation/devicetree/bindings/net/can/microchip,mcp251xfd.yaml +++ b/Documentation/devicetree/bindings/net/can/microchip,mcp251xfd.yaml @@ -40,7 +40,7 @@ properties: microchip,rx-int-gpios: description: - GPIO phandle of GPIO connected to to INT1 pin of the MCP251XFD, which + GPIO phandle of GPIO connected to INT1 pin of the MCP251XFD, which signals a pending RX interrupt. maxItems: 1 diff --git a/Documentation/devicetree/bindings/net/can/nxp,sja1000.yaml b/Documentation/devicetree/bindings/net/can/nxp,sja1000.yaml index 144a3785132c..ec0c2168e4b9 100644 --- a/Documentation/devicetree/bindings/net/can/nxp,sja1000.yaml +++ b/Documentation/devicetree/bindings/net/can/nxp,sja1000.yaml @@ -16,9 +16,7 @@ properties: - nxp,sja1000 - technologic,sja1000 - items: - - enum: - - renesas,r9a06g032-sja1000 # RZ/N1D - - renesas,r9a06g033-sja1000 # RZ/N1S + - const: renesas,r9a06g032-sja1000 # RZ/N1D - const: renesas,rzn1-sja1000 # RZ/N1 reg: diff --git a/Documentation/devicetree/bindings/net/can/renesas,rcar-canfd.yaml b/Documentation/devicetree/bindings/net/can/renesas,rcar-canfd.yaml index 7c5ac5d2e880..f4ac21c68427 100644 --- a/Documentation/devicetree/bindings/net/can/renesas,rcar-canfd.yaml +++ b/Documentation/devicetree/bindings/net/can/renesas,rcar-canfd.yaml @@ -42,19 +42,80 @@ properties: - renesas,r9a07g054-canfd # RZ/V2L - const: renesas,rzg2l-canfd # RZ/G2L family + - const: renesas,r9a09g047-canfd # RZ/G3E + reg: maxItems: 1 - interrupts: true + interrupts: + oneOf: + - items: + - description: Channel interrupt + - description: Global interrupt + - items: + - description: CAN global error interrupt + - description: CAN receive FIFO interrupt + - description: CAN0 error interrupt + - description: CAN0 transmit interrupt + - description: CAN0 transmit/receive FIFO receive completion interrupt + - description: CAN1 error interrupt + - description: CAN1 transmit interrupt + - description: CAN1 transmit/receive FIFO receive completion interrupt + - description: CAN2 error interrupt + - description: CAN2 transmit interrupt + - description: CAN2 transmit/receive FIFO receive completion interrupt + - description: CAN3 error interrupt + - description: CAN3 transmit interrupt + - description: CAN3 transmit/receive FIFO receive completion interrupt + - description: CAN4 error interrupt + - description: CAN4 transmit interrupt + - description: CAN4 transmit/receive FIFO receive completion interrupt + - description: CAN5 error interrupt + - description: CAN5 transmit interrupt + - description: CAN5 transmit/receive FIFO receive completion interrupt + minItems: 8 + + interrupt-names: + oneOf: + - items: + - const: ch_int + - const: g_int + - items: + - const: g_err + - const: g_recc + - const: ch0_err + - const: ch0_rec + - const: ch0_trx + - const: ch1_err + - const: ch1_rec + - const: ch1_trx + - const: ch2_err + - const: ch2_rec + - const: ch2_trx + - const: ch3_err + - const: ch3_rec + - const: ch3_trx + - const: ch4_err + - const: ch4_rec + - const: ch4_trx + - const: ch5_err + - const: ch5_rec + - const: ch5_trx + minItems: 8 clocks: maxItems: 3 clock-names: - items: - - const: fck - - const: canfd - - const: can_clk + oneOf: + - items: + - const: fck + - const: canfd + - const: can_clk + - items: + - const: fck + - const: ram_clk + - const: can_clk power-domains: maxItems: 1 @@ -117,48 +178,38 @@ allOf: then: properties: interrupts: - items: - - description: CAN global error interrupt - - description: CAN receive FIFO interrupt - - description: CAN0 error interrupt - - description: CAN0 transmit interrupt - - description: CAN0 transmit/receive FIFO receive completion interrupt - - description: CAN1 error interrupt - - description: CAN1 transmit interrupt - - description: CAN1 transmit/receive FIFO receive completion interrupt + maxItems: 8 interrupt-names: - items: - - const: g_err - - const: g_recc - - const: ch0_err - - const: ch0_rec - - const: ch0_trx - - const: ch1_err - - const: ch1_rec - - const: ch1_trx + maxItems: 8 resets: + minItems: 2 maxItems: 2 reset-names: - items: - - const: rstp_n - - const: rstc_n + minItems: 2 + maxItems: 2 required: - reset-names - else: + + - if: + properties: + compatible: + contains: + enum: + - renesas,rcar-gen3-canfd + - renesas,rcar-gen4-canfd + then: properties: interrupts: - items: - - description: Channel interrupt - - description: Global interrupt + minItems: 2 + maxItems: 2 interrupt-names: - items: - - const: ch_int - - const: g_int + minItems: 2 + maxItems: 2 resets: maxItems: 1 @@ -167,20 +218,54 @@ allOf: properties: compatible: contains: + const: renesas,r9a09g047-canfd + then: + properties: + interrupts: + minItems: 20 + + interrupt-names: + minItems: 20 + + resets: + minItems: 2 + maxItems: 2 + + reset-names: + minItems: 2 + maxItems: 2 + + required: + - reset-names + + - if: + properties: + compatible: + contains: + enum: + - renesas,rcar-gen3-canfd + - renesas,rzg2l-canfd + then: + patternProperties: + "^channel[2-7]$": false + + - if: + properties: + compatible: + contains: const: renesas,r8a779h0-canfd then: patternProperties: - "^channel[5-7]$": false - else: - if: - not: - properties: - compatible: - contains: - const: renesas,rcar-gen4-canfd - then: - patternProperties: - "^channel[2-7]$": false + "^channel[4-7]$": false + + - if: + properties: + compatible: + contains: + const: renesas,r9a09g047-canfd + then: + patternProperties: + "^channel[6-7]$": false unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/net/cdns,macb.yaml b/Documentation/devicetree/bindings/net/cdns,macb.yaml index 3c30dd23cd4e..8d69846b2e09 100644 --- a/Documentation/devicetree/bindings/net/cdns,macb.yaml +++ b/Documentation/devicetree/bindings/net/cdns,macb.yaml @@ -197,7 +197,6 @@ examples: }; - | - #include <dt-bindings/clock/xlnx-zynqmp-clk.h> #include <dt-bindings/power/xlnx-zynqmp-power.h> #include <dt-bindings/reset/xlnx-zynqmp-resets.h> #include <dt-bindings/phy/phy.h> @@ -210,9 +209,9 @@ examples: interrupt-parent = <&gic>; interrupts = <0 59 4>, <0 59 4>; reg = <0x0 0xff0c0000 0x0 0x1000>; - clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM1_REF>, - <&zynqmp_clk GEM1_TX>, <&zynqmp_clk GEM1_RX>, - <&zynqmp_clk GEM_TSU>; + clocks = <&zynqmp_clk 31>, <&zynqmp_clk 105>, + <&zynqmp_clk 51>, <&zynqmp_clk 50>, + <&zynqmp_clk 44>; clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk"; #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml b/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml index 4c78c546343f..d6c957a33b48 100644 --- a/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml +++ b/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml @@ -16,6 +16,7 @@ properties: compatible: oneOf: - const: brcm,bcm5325 + - const: brcm,bcm53101 - const: brcm,bcm53115 - const: brcm,bcm53125 - const: brcm,bcm53128 @@ -77,6 +78,7 @@ allOf: contains: enum: - brcm,bcm5325 + - brcm,bcm53101 - brcm,bcm53115 - brcm,bcm53125 - brcm,bcm53128 diff --git a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml index ea979bcae1d6..51205f9f2985 100644 --- a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml +++ b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml @@ -96,6 +96,10 @@ properties: Built-in switch of the Airoha EN7581 SoC const: airoha,en7581-switch + - description: + Built-in switch of the Airoha AN7583 SoC + const: airoha,an7583-switch + reg: maxItems: 1 @@ -291,6 +295,7 @@ allOf: enum: - mediatek,mt7988-switch - airoha,en7581-switch + - airoha,an7583-switch then: $ref: "#/$defs/mt7530-dsa-port" properties: diff --git a/Documentation/devicetree/bindings/net/ethernet-controller.yaml b/Documentation/devicetree/bindings/net/ethernet-controller.yaml index 45819b235800..7cbf11bbe99c 100644 --- a/Documentation/devicetree/bindings/net/ethernet-controller.yaml +++ b/Documentation/devicetree/bindings/net/ethernet-controller.yaml @@ -16,30 +16,6 @@ properties: label: description: Human readable label on a port of a box. - local-mac-address: - description: - Specifies the MAC address that was assigned to the network device. - $ref: /schemas/types.yaml#/definitions/uint8-array - minItems: 6 - maxItems: 6 - - mac-address: - description: - Specifies the MAC address that was last used by the boot - program; should be used in cases where the MAC address assigned - to the device by the boot program is different from the - local-mac-address property. - $ref: /schemas/types.yaml#/definitions/uint8-array - minItems: 6 - maxItems: 6 - - max-frame-size: - $ref: /schemas/types.yaml#/definitions/uint32 - description: - Maximum transfer unit (IEEE defined MTU), rather than the - maximum frame size (there\'s contradiction in the Devicetree - Specification). - max-speed: $ref: /schemas/types.yaml#/definitions/uint32 description: @@ -74,19 +50,17 @@ properties: - rev-rmii - moca - # RX and TX delays are added by the MAC when required + # RX and TX delays are provided by the PCB. See below - rgmii - # RGMII with internal RX and TX delays provided by the PHY, - # the MAC should not add the RX or TX delays in this case + # RX and TX delays are not provided by the PCB. This is the most + # frequent case. See below - rgmii-id - # RGMII with internal RX delay provided by the PHY, the MAC - # should not add an RX delay in this case + # TX delay is provided by the PCB. See below - rgmii-rxid - # RGMII with internal TX delay provided by the PHY, the MAC - # should not add an TX delay in this case + # RX delay is provided by the PCB. See below - rgmii-txid - rtbi - smii @@ -197,7 +171,7 @@ properties: description: Link speed. $ref: /schemas/types.yaml#/definitions/uint32 - enum: [10, 100, 1000, 2500, 10000] + enum: [10, 100, 1000, 2500, 5000, 10000] full-duplex: $ref: /schemas/types.yaml#/definitions/flag @@ -262,6 +236,7 @@ dependencies: pcs-handle-names: [pcs-handle] allOf: + - $ref: /schemas/net/network-class.yaml# - if: properties: phy-mode: @@ -286,4 +261,89 @@ allOf: additionalProperties: true +# Informative +# =========== +# +# 'phy-modes' & 'phy-connection-type' properties 'rgmii', 'rgmii-id', +# 'rgmii-rxid', and 'rgmii-txid' are frequently used wrongly by +# developers. This informative section clarifies their usage. +# +# The RGMII specification requires a 2ns delay between the data and +# clock signals on the RGMII bus. How this delay is implemented is not +# specified. +# +# One option is to make the clock traces on the PCB longer than the +# data traces. A sufficiently difference in length can provide the 2ns +# delay. If both the RX and TX delays are implemented in this manner, +# 'rgmii' should be used, so indicating the PCB adds the delays. +# +# If the PCB does not add these delays via extra long traces, +# 'rgmii-id' should be used. Here, 'id' refers to 'internal delay', +# where either the MAC or PHY adds the delay. +# +# If only one of the two delays are implemented via extra long clock +# lines, either 'rgmii-rxid' or 'rgmii-txid' should be used, +# indicating the MAC or PHY should implement one of the delays +# internally, while the PCB implements the other delay. +# +# Device Tree describes hardware, and in this case, it describes the +# PCB between the MAC and the PHY, if the PCB implements delays or +# not. +# +# In practice, very few PCBs make use of extra long clock lines. Hence +# any RGMII phy mode other than 'rgmii-id' is probably wrong, and is +# unlikely to be accepted during review without details provided in +# the commit description and comments in the .dts file. +# +# When the PCB does not implement the delays, the MAC or PHY must. As +# such, this is software configuration, and so not described in Device +# Tree. +# +# The following describes how Linux implements the configuration of +# the MAC and PHY to add these delays when the PCB does not. As stated +# above, developers often get this wrong, and the aim of this section +# is reduce the frequency of these errors by Linux developers. Other +# users of the Device Tree may implement it differently, and still be +# consistent with both the normative and informative description +# above. +# +# By default in Linux, when using phylib/phylink, the MAC is expected +# to read the 'phy-mode' from Device Tree, not implement any delays, +# and pass the value to the PHY. The PHY will then implement delays as +# specified by the 'phy-mode'. The PHY should always be reconfigured +# to implement the needed delays, replacing any setting performed by +# strapping or the bootloader, etc. +# +# Experience to date is that all PHYs which implement RGMII also +# implement the ability to add or not add the needed delays. Hence +# this default is expected to work in all cases. Ignoring this default +# is likely to be questioned by Reviews, and require a strong argument +# to be accepted. +# +# There are a small number of cases where the MAC has hard coded +# delays which cannot be disabled. The 'phy-mode' only describes the +# PCB. The inability to disable the delays in the MAC does not change +# the meaning of 'phy-mode'. It does however mean that a 'phy-mode' of +# 'rgmii' is now invalid, it cannot be supported, since both the PCB +# and the MAC and PHY adding delays cannot result in a functional +# link. Thus the MAC should report a fatal error for any modes which +# cannot be supported. When the MAC implements the delay, it must +# ensure that the PHY does not also implement the same delay. So it +# must modify the phy-mode it passes to the PHY, removing the delay it +# has added. Failure to remove the delay will result in a +# non-functioning link. +# +# Sometimes there is a need to fine tune the delays. Often the MAC or +# PHY can perform this fine tuning. In the MAC node, the Device Tree +# properties 'rx-internal-delay-ps' and 'tx-internal-delay-ps' should +# be used to indicate fine tuning performed by the MAC. The values +# expected here are small. A value of 2000ps, i.e 2ns, and a phy-mode +# of 'rgmii' will not be accepted by Reviewers. +# +# If the PHY is to perform fine tuning, the properties +# 'rx-internal-delay-ps' and 'tx-internal-delay-ps' in the PHY node +# should be used. When the PHY is implementing delays, e.g. 'rgmii-id' +# these properties should have a value near to 2000ps. If the PCB is +# implementing delays, e.g. 'rgmii', a small value can be used to fine +# tune the delay added by the PCB. ... diff --git a/Documentation/devicetree/bindings/net/ethernet-phy.yaml b/Documentation/devicetree/bindings/net/ethernet-phy.yaml index 2c71454ae8e3..71e2cd32580f 100644 --- a/Documentation/devicetree/bindings/net/ethernet-phy.yaml +++ b/Documentation/devicetree/bindings/net/ethernet-phy.yaml @@ -232,6 +232,22 @@ properties: PHY's that have configurable TX internal delays. If this property is present then the PHY applies the TX delay. + tx-amplitude-100base-tx-percent: + description: + Transmit amplitude gain applied for 100BASE-TX. 100% matches 2V + peak-to-peak specified in ANSI X3.263. When omitted, the PHYs default + will be left as is. + + mac-termination-ohms: + maximum: 200 + description: + The xMII signals need series termination on the driver side to match both + the output driver impedance and the line characteristic impedance, to + prevent reflections and EMI problems. Select a resistance value which is + supported by the builtin resistors of the PHY, otherwise the resistors may + have to be placed on board. When omitted, the PHYs default will be left as + is. + leds: type: object diff --git a/Documentation/devicetree/bindings/net/faraday,ftgmac100.yaml b/Documentation/devicetree/bindings/net/faraday,ftgmac100.yaml index 9bcbacb6640d..55d6a8379025 100644 --- a/Documentation/devicetree/bindings/net/faraday,ftgmac100.yaml +++ b/Documentation/devicetree/bindings/net/faraday,ftgmac100.yaml @@ -44,6 +44,9 @@ properties: phy-mode: enum: - rgmii + - rgmii-id + - rgmii-rxid + - rgmii-txid - rmii phy-handle: true diff --git a/Documentation/devicetree/bindings/net/fsl,gianfar-mdio.yaml b/Documentation/devicetree/bindings/net/fsl,gianfar-mdio.yaml new file mode 100644 index 000000000000..03c819bc701b --- /dev/null +++ b/Documentation/devicetree/bindings/net/fsl,gianfar-mdio.yaml @@ -0,0 +1,112 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/fsl,gianfar-mdio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale Gianfar (TSEC) MDIO Device + +description: + This binding describes the MDIO is a bus to which the PHY devices are + connected. For each device that exists on this bus, a child node should be + created. + + Some TSECs are associated with an internal Ten-Bit Interface (TBI) PHY. This + PHY is accessed through the local MDIO bus. These buses are defined similarly + to the mdio buses, except they are compatible with "fsl,gianfar-tbi". The TBI + PHYs underneath them are similar to normal PHYs, but the reg property is + considered instructive, rather than descriptive. The reg property should be + chosen so it doesn't interfere with other PHYs on the bus. + +maintainers: + - J. Neuschäfer <j.ne@posteo.net> + +# This is needed to distinguish gianfar.yaml and gianfar-mdio.yaml, because +# both use compatible = "gianfar" (with different device_type values) +select: + oneOf: + - properties: + compatible: + contains: + const: gianfar + device_type: + const: mdio + required: + - device_type + + - properties: + compatible: + contains: + enum: + - fsl,gianfar-tbi + - fsl,gianfar-mdio + - fsl,etsec2-tbi + - fsl,etsec2-mdio + - fsl,ucc-mdio + - ucc_geth_phy + + required: + - compatible + +properties: + compatible: + enum: + - fsl,gianfar-tbi + - fsl,gianfar-mdio + - fsl,etsec2-tbi + - fsl,etsec2-mdio + - fsl,ucc-mdio + - gianfar + - ucc_geth_phy + + reg: + minItems: 1 + items: + - description: + Offset and length of the register set for the device + + - description: + Optionally, the offset and length of the TBIPA register (TBI PHY + address register). If TBIPA register is not specified, the driver + will attempt to infer it from the register set specified (your + mileage may vary). + + device_type: + const: mdio + +required: + - reg + - "#address-cells" + - "#size-cells" + +allOf: + - $ref: mdio.yaml# + + - if: + properties: + compatible: + contains: + const: ucc_geth_phy + then: + required: + - device_type + +unevaluatedProperties: false + +examples: + - | + soc { + #address-cells = <1>; + #size-cells = <1>; + + mdio@24520 { + reg = <0x24520 0x20>; + compatible = "fsl,gianfar-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + ethernet-phy@0 { + reg = <0>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/fsl,gianfar.yaml b/Documentation/devicetree/bindings/net/fsl,gianfar.yaml new file mode 100644 index 000000000000..f92f284aa05b --- /dev/null +++ b/Documentation/devicetree/bindings/net/fsl,gianfar.yaml @@ -0,0 +1,248 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/fsl,gianfar.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale Three-Speed Ethernet Controller (TSEC), "Gianfar" + +maintainers: + - J. Neuschäfer <j.ne@posteo.net> + +# This is needed to distinguish gianfar.yaml and gianfar-mdio.yaml, because +# both use compatible = "gianfar" (with different device_type values) +select: + oneOf: + - properties: + compatible: + contains: + const: gianfar + device_type: + const: network + required: + - device_type + + - properties: + compatible: + const: fsl,etsec2 + + required: + - compatible + +properties: + compatible: + enum: + - gianfar + - fsl,etsec2 + + device_type: + const: network + + model: + enum: + - FEC + - TSEC + - eTSEC + + reg: + maxItems: 1 + + ranges: true + + "#address-cells": + enum: [ 1, 2 ] + + "#size-cells": + enum: [ 1, 2 ] + + cell-index: + $ref: /schemas/types.yaml#/definitions/uint32 + + interrupts: + minItems: 1 + items: + - description: Transmit interrupt or single combined interrupt + - description: Receive interrupt + - description: Error interrupt + + dma-coherent: true + + fsl,magic-packet: + type: boolean + description: + If present, indicates that the hardware supports waking up via magic packet. + + fsl,wake-on-filer: + type: boolean + description: + If present, indicates that the hardware supports waking up by Filer + General Purpose Interrupt (FGPI) asserted on the Rx int line. This is + an advanced power management capability allowing certain packet types + (user) defined by filer rules to wake up the system. + + bd-stash: + type: boolean + description: + If present, indicates that the hardware supports stashing buffer + descriptors in the L2. + + rx-stash-len: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Denotes the number of bytes of a received buffer to stash in the L2. + + rx-stash-idx: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Denotes the index of the first byte from the received buffer to stash in + the L2. + + fsl,num_rx_queues: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Number of receive queues + const: 8 + + fsl,num_tx_queues: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Number of transmit queues + const: 8 + + tbi-handle: + $ref: /schemas/types.yaml#/definitions/phandle + description: Reference (phandle) to the TBI node + +required: + - compatible + - model + +patternProperties: + "^mdio@[0-9a-f]+$": + $ref: /schemas/net/fsl,gianfar-mdio.yaml# + +allOf: + - $ref: ethernet-controller.yaml# + + # eTSEC2 controller nodes have "queue group" subnodes and don't need a "reg" + # property. + - if: + properties: + compatible: + contains: + const: fsl,etsec2 + then: + patternProperties: + "^queue-group@[0-9a-f]+$": + type: object + + properties: + reg: + maxItems: 1 + + interrupts: + items: + - description: Transmit interrupt + - description: Receive interrupt + - description: Error interrupt + + required: + - reg + - interrupts + + additionalProperties: false + else: + required: + - reg + + # TSEC and eTSEC devices require three interrupts + - if: + properties: + model: + contains: + enum: [ TSEC, eTSEC ] + then: + properties: + interrupts: + items: + - description: Transmit interrupt + - description: Receive interrupt + - description: Error interrupt + + + +unevaluatedProperties: false + +examples: + - | + ethernet@24000 { + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <29 2>, <30 2>, <34 2>; + interrupt-parent = <&mpic>; + phy-handle = <&phy0>; + }; + + - | + #include <dt-bindings/interrupt-controller/irq.h> + + ethernet@24000 { + compatible = "gianfar"; + reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "eTSEC"; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <32 IRQ_TYPE_LEVEL_LOW>, + <33 IRQ_TYPE_LEVEL_LOW>, + <34 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&ipic>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + }; + }; + + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + bus { + #address-cells = <2>; + #size-cells = <2>; + + ethernet { + compatible = "fsl,etsec2"; + ranges; + device_type = "network"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&gic>; + model = "eTSEC"; + fsl,magic-packet; + dma-coherent; + + queue-group@2d10000 { + reg = <0x0 0x2d10000 0x0 0x1000>; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; + }; + + queue-group@2d14000 { + reg = <0x0 0x2d14000 0x0 0x1000>; + interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt b/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt index 9c9668c1b6a2..b18bb4c997ea 100644 --- a/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt +++ b/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt @@ -1,88 +1,14 @@ * MDIO IO device -The MDIO is a bus to which the PHY devices are connected. For each -device that exists on this bus, a child node should be created. See -the definition of the PHY node in booting-without-of.txt for an example -of how to define a PHY. - -Required properties: - - reg : Offset and length of the register set for the device, and optionally - the offset and length of the TBIPA register (TBI PHY address - register). If TBIPA register is not specified, the driver will - attempt to infer it from the register set specified (your mileage may - vary). - - compatible : Should define the compatible device type for the - mdio. Currently supported strings/devices are: - - "fsl,gianfar-tbi" - - "fsl,gianfar-mdio" - - "fsl,etsec2-tbi" - - "fsl,etsec2-mdio" - - "fsl,ucc-mdio" - - "fsl,fman-mdio" - When device_type is "mdio", the following strings are also considered: - - "gianfar" - - "ucc_geth_phy" - -Example: - - mdio@24520 { - reg = <24520 20>; - compatible = "fsl,gianfar-mdio"; - - ethernet-phy@0 { - ...... - }; - }; +Refer to Documentation/devicetree/bindings/net/fsl,gianfar-mdio.yaml * TBI Internal MDIO bus -As of this writing, every tsec is associated with an internal TBI PHY. -This PHY is accessed through the local MDIO bus. These buses are defined -similarly to the mdio buses, except they are compatible with "fsl,gianfar-tbi". -The TBI PHYs underneath them are similar to normal PHYs, but the reg property -is considered instructive, rather than descriptive. The reg property should -be chosen so it doesn't interfere with other PHYs on the bus. +Refer to Documentation/devicetree/bindings/net/fsl,gianfar-mdio.yaml * Gianfar-compatible ethernet nodes -Properties: - - - device_type : Should be "network" - - model : Model of the device. Can be "TSEC", "eTSEC", or "FEC" - - compatible : Should be "gianfar" - - reg : Offset and length of the register set for the device - - interrupts : For FEC devices, the first interrupt is the device's - interrupt. For TSEC and eTSEC devices, the first interrupt is - transmit, the second is receive, and the third is error. - - phy-handle : See ethernet.txt file in the same directory. - - fixed-link : See fixed-link.txt in the same directory. - - phy-connection-type : See ethernet.txt file in the same directory. - This property is only really needed if the connection is of type - "rgmii-id", as all other connection types are detected by hardware. - - fsl,magic-packet : If present, indicates that the hardware supports - waking up via magic packet. - - fsl,wake-on-filer : If present, indicates that the hardware supports - waking up by Filer General Purpose Interrupt (FGPI) asserted on the - Rx int line. This is an advanced power management capability allowing - certain packet types (user) defined by filer rules to wake up the system. - - bd-stash : If present, indicates that the hardware supports stashing - buffer descriptors in the L2. - - rx-stash-len : Denotes the number of bytes of a received buffer to stash - in the L2. - - rx-stash-idx : Denotes the index of the first byte from the received - buffer to stash in the L2. - -Example: - ethernet@24000 { - device_type = "network"; - model = "TSEC"; - compatible = "gianfar"; - reg = <0x24000 0x1000>; - local-mac-address = [ 00 E0 0C 00 73 00 ]; - interrupts = <29 2 30 2 34 2>; - interrupt-parent = <&mpic>; - phy-handle = <&phy0> - }; +Refer to Documentation/devicetree/bindings/net/fsl,gianfar.yaml * Gianfar PTP clock nodes diff --git a/Documentation/devicetree/bindings/net/ieee802154/ca8210.txt b/Documentation/devicetree/bindings/net/ieee802154/ca8210.txt index a1046e636fa1..f1bd07a0097d 100644 --- a/Documentation/devicetree/bindings/net/ieee802154/ca8210.txt +++ b/Documentation/devicetree/bindings/net/ieee802154/ca8210.txt @@ -20,7 +20,7 @@ Example: reg = <0>; spi-max-frequency = <3000000>; spi-cpol; - reset-gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>; + reset-gpio = <&gpio1 1 GPIO_ACTIVE_LOW>; irq-gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>; extclock-enable; extclock-freq = 16000000; diff --git a/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml b/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml index 42a0bc94312c..62c1da36a2b5 100644 --- a/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml +++ b/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml @@ -41,6 +41,12 @@ properties: - const: ptp_ref - const: tx_clk + interrupts: + maxItems: 1 + + interrupt-names: + const: macirq + required: - compatible - clocks diff --git a/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml b/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml index ed9d845f6008..3aab21b8e8de 100644 --- a/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml +++ b/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml @@ -64,6 +64,12 @@ properties: - const: rmii_internal - const: mac_cg + interrupts: + maxItems: 1 + + interrupt-names: + const: macirq + power-domains: maxItems: 1 diff --git a/Documentation/devicetree/bindings/net/network-class.yaml b/Documentation/devicetree/bindings/net/network-class.yaml new file mode 100644 index 000000000000..06461fb92eb8 --- /dev/null +++ b/Documentation/devicetree/bindings/net/network-class.yaml @@ -0,0 +1,46 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/network-class.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Network Class Common Properties + +maintainers: + - Devicetree Specification Mailing List <devicetree-spec@vger.kernel.org> + +properties: + address-bits: + description: + Specifies number of address bits required to address the device + described by this node, e.g. size of the MAC address. + default: 48 + const: 48 + + local-mac-address: + description: + Specifies MAC address that was assigned to the network device described by + the node containing this property. + $ref: /schemas/types.yaml#/definitions/uint8-array + minItems: 6 + maxItems: 6 + + mac-address: + description: + Specifies the MAC address that was last used by the boot program. This + property should be used in cases where the MAC address assigned to the + device by the boot program is different from the + local-mac-address property. This property shall be used only if the value + differs from local-mac-address property value. + $ref: /schemas/types.yaml#/definitions/uint8-array + minItems: 6 + maxItems: 6 + + max-frame-size: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Maximum transfer unit (IEEE defined MTU), rather than the + maximum frame size (there\'s contradiction in the Devicetree + Specification). + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml b/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml index 87bc4416eadf..e5db346beca9 100644 --- a/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml +++ b/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml @@ -56,6 +56,14 @@ properties: - tx - mem + interrupts: + maxItems: 2 + + interrupt-names: + items: + - const: macirq + - const: eth_wake_irq + intf_mode: $ref: /schemas/types.yaml#/definitions/phandle-array items: diff --git a/Documentation/devicetree/bindings/net/qcom,ipa.yaml b/Documentation/devicetree/bindings/net/qcom,ipa.yaml index 1a46d80a66e8..b4a79912d473 100644 --- a/Documentation/devicetree/bindings/net/qcom,ipa.yaml +++ b/Documentation/devicetree/bindings/net/qcom,ipa.yaml @@ -210,70 +210,70 @@ additionalProperties: false examples: - | - #include <dt-bindings/interrupt-controller/arm-gic.h> - #include <dt-bindings/clock/qcom,rpmh.h> - #include <dt-bindings/interconnect/qcom,sdm845.h> - - smp2p-mpss { - compatible = "qcom,smp2p"; - interrupts = <GIC_SPI 576 IRQ_TYPE_EDGE_RISING>; - mboxes = <&apss_shared 6>; - qcom,smem = <94>, <432>; - qcom,local-pid = <0>; - qcom,remote-pid = <5>; - - ipa_smp2p_out: ipa-ap-to-modem { - qcom,entry-name = "ipa"; - #qcom,smem-state-cells = <1>; - }; - - ipa_smp2p_in: ipa-modem-to-ap { - qcom,entry-name = "ipa"; - interrupt-controller; - #interrupt-cells = <2>; - }; + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/interconnect/qcom,sdm845.h> + + smp2p-mpss { + compatible = "qcom,smp2p"; + interrupts = <GIC_SPI 576 IRQ_TYPE_EDGE_RISING>; + mboxes = <&apss_shared 6>; + qcom,smem = <94>, <432>; + qcom,local-pid = <0>; + qcom,remote-pid = <5>; + + ipa_smp2p_out: ipa-ap-to-modem { + qcom,entry-name = "ipa"; + #qcom,smem-state-cells = <1>; }; - ipa@1e40000 { - compatible = "qcom,sc7180-ipa"; - - qcom,gsi-loader = "self"; - memory-region = <&ipa_fw_mem>; - firmware-name = "qcom/sc7180-trogdor/modem/modem.mbn"; - - iommus = <&apps_smmu 0x440 0x0>, - <&apps_smmu 0x442 0x0>; - reg = <0x1e40000 0x7000>, - <0x1e47000 0x2000>, - <0x1e04000 0x2c000>; - reg-names = "ipa-reg", - "ipa-shared", - "gsi"; - - interrupts-extended = <&intc GIC_SPI 311 IRQ_TYPE_EDGE_RISING>, - <&intc GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>, - <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, - <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "ipa", - "gsi", - "ipa-clock-query", - "ipa-setup-ready"; - - clocks = <&rpmhcc RPMH_IPA_CLK>; - clock-names = "core"; - - interconnects = - <&aggre2_noc MASTER_IPA 0 &mc_virt SLAVE_EBI1 0>, - <&aggre2_noc MASTER_IPA 0 &system_noc SLAVE_IMEM 0>, - <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_IPA_CFG 0>; - interconnect-names = "memory", - "imem", - "config"; - - qcom,qmp = <&aoss_qmp>; - - qcom,smem-states = <&ipa_smp2p_out 0>, - <&ipa_smp2p_out 1>; - qcom,smem-state-names = "ipa-clock-enabled-valid", - "ipa-clock-enabled"; + ipa_smp2p_in: ipa-modem-to-ap { + qcom,entry-name = "ipa"; + interrupt-controller; + #interrupt-cells = <2>; }; + }; + + ipa@1e40000 { + compatible = "qcom,sc7180-ipa"; + + qcom,gsi-loader = "self"; + memory-region = <&ipa_fw_mem>; + firmware-name = "qcom/sc7180-trogdor/modem/modem.mbn"; + + iommus = <&apps_smmu 0x440 0x0>, + <&apps_smmu 0x442 0x0>; + reg = <0x1e40000 0x7000>, + <0x1e47000 0x2000>, + <0x1e04000 0x2c000>; + reg-names = "ipa-reg", + "ipa-shared", + "gsi"; + + interrupts-extended = <&intc GIC_SPI 311 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>, + <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "ipa", + "gsi", + "ipa-clock-query", + "ipa-setup-ready"; + + clocks = <&rpmhcc RPMH_IPA_CLK>; + clock-names = "core"; + + interconnects = + <&aggre2_noc MASTER_IPA 0 &mc_virt SLAVE_EBI1 0>, + <&aggre2_noc MASTER_IPA 0 &system_noc SLAVE_IMEM 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_IPA_CFG 0>; + interconnect-names = "memory", + "imem", + "config"; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&ipa_smp2p_out 0>, + <&ipa_smp2p_out 1>; + qcom,smem-state-names = "ipa-clock-enabled-valid", + "ipa-clock-enabled"; + }; diff --git a/Documentation/devicetree/bindings/net/realtek,rtl9301-mdio.yaml b/Documentation/devicetree/bindings/net/realtek,rtl9301-mdio.yaml new file mode 100644 index 000000000000..02e4e33e9969 --- /dev/null +++ b/Documentation/devicetree/bindings/net/realtek,rtl9301-mdio.yaml @@ -0,0 +1,86 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/realtek,rtl9301-mdio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Realtek RTL9300 MDIO Controller + +maintainers: + - Chris Packham <chris.packham@alliedtelesis.co.nz> + +properties: + compatible: + oneOf: + - items: + - enum: + - realtek,rtl9302b-mdio + - realtek,rtl9302c-mdio + - realtek,rtl9303-mdio + - const: realtek,rtl9301-mdio + - const: realtek,rtl9301-mdio + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + reg: + maxItems: 1 + +patternProperties: + '^mdio-bus@[0-3]$': + $ref: mdio.yaml# + + properties: + reg: + maxItems: 1 + + required: + - reg + + patternProperties: + '^ethernet-phy@[a-f0-9]+$': + type: object + $ref: ethernet-phy.yaml# + unevaluatedProperties: false + + unevaluatedProperties: false + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + mdio-controller@ca00 { + compatible = "realtek,rtl9301-mdio"; + reg = <0xca00 0x200>; + #address-cells = <1>; + #size-cells = <0>; + + mdio-bus@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0>; + }; + }; + + mdio-bus@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/realtek,rtl9301-switch.yaml b/Documentation/devicetree/bindings/net/realtek,rtl9301-switch.yaml new file mode 100644 index 000000000000..80eabc170669 --- /dev/null +++ b/Documentation/devicetree/bindings/net/realtek,rtl9301-switch.yaml @@ -0,0 +1,175 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/realtek,rtl9301-switch.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Realtek Switch with Internal CPU + +maintainers: + - Chris Packham <chris.packham@alliedtelesis.co.nz> + +description: + The RTL9300 is a series of is an Ethernet switches with an integrated CPU. A + number of different peripherals are accessed through a common register block, + represented here as a syscon node. + +$ref: ethernet-switch.yaml#/$defs/ethernet-ports + +properties: + compatible: + items: + - enum: + - realtek,rtl9301-switch + - realtek,rtl9302b-switch + - realtek,rtl9302c-switch + - realtek,rtl9303-switch + - const: syscon + - const: simple-mfd + + reg: + maxItems: 1 + + interrupts: + maxItems: 2 + + interrupt-names: + items: + - const: switch + - const: nic + + '#address-cells': + const: 1 + + '#size-cells': + const: 1 + + ethernet-ports: + type: object + +patternProperties: + 'reboot@[0-9a-f]+$': + $ref: /schemas/power/reset/syscon-reboot.yaml# + + 'i2c@[0-9a-f]+$': + $ref: /schemas/i2c/realtek,rtl9301-i2c.yaml# + + 'mdio-controller@[0-9a-f]+$': + $ref: realtek,rtl9301-mdio.yaml# + +required: + - compatible + - reg + - interrupts + - interrupt-names + +additionalProperties: false + +examples: + - | + ethernet-switch@1b000000 { + compatible = "realtek,rtl9301-switch", "syscon", "simple-mfd"; + reg = <0x1b000000 0x10000>; + interrupt-parent = <&intc>; + interrupts = <23>, <24>; + interrupt-names = "switch", "nic"; + #address-cells = <1>; + #size-cells = <1>; + + reboot@c { + compatible = "syscon-reboot"; + reg = <0x0c 0x4>; + value = <0x01>; + }; + + i2c@36c { + compatible = "realtek,rtl9301-i2c"; + reg = <0x36c 0x14>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + gpio@20 { + compatible = "nxp,pca9555"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x20>; + }; + }; + + i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + gpio@20 { + compatible = "nxp,pca9555"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x20>; + }; + }; + }; + + i2c@388 { + compatible = "realtek,rtl9301-i2c"; + reg = <0x388 0x14>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@7 { + reg = <7>; + #address-cells = <1>; + #size-cells = <0>; + gpio@20 { + compatible = "nxp,pca9555"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x20>; + }; + }; + }; + + mdio-controller@ca00 { + compatible = "realtek,rtl9301-mdio"; + reg = <0xca00 0x200>; + #address-cells = <1>; + #size-cells = <0>; + + mdio-bus@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + phy1: ethernet-phy@0 { + reg = <0>; + }; + }; + mdio-bus@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + phy2: ethernet-phy@0 { + reg = <0>; + }; + }; + }; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + phy-handle = <&phy1>; + }; + port@1 { + reg = <1>; + phy-handle = <&phy2>; + }; + }; + }; + diff --git a/Documentation/devicetree/bindings/net/renesas,r9a09g057-gbeth.yaml b/Documentation/devicetree/bindings/net/renesas,r9a09g057-gbeth.yaml new file mode 100644 index 000000000000..c498a9999289 --- /dev/null +++ b/Documentation/devicetree/bindings/net/renesas,r9a09g057-gbeth.yaml @@ -0,0 +1,203 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/renesas,r9a09g057-gbeth.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: GBETH glue layer for Renesas RZ/V2H(P) (and similar SoCs) + +maintainers: + - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> + +select: + properties: + compatible: + contains: + enum: + - renesas,r9a09g056-gbeth + - renesas,r9a09g057-gbeth + - renesas,rzv2h-gbeth + required: + - compatible + +properties: + compatible: + items: + - enum: + - renesas,r9a09g056-gbeth # RZ/V2N + - renesas,r9a09g057-gbeth # RZ/V2H(P) + - const: renesas,rzv2h-gbeth + - const: snps,dwmac-5.20 + + reg: + maxItems: 1 + + clocks: + items: + - description: CSR clock + - description: AXI system clock + - description: PTP clock + - description: TX clock + - description: RX clock + - description: TX clock phase-shifted by 180 degrees + - description: RX clock phase-shifted by 180 degrees + + clock-names: + items: + - const: stmmaceth + - const: pclk + - const: ptp_ref + - const: tx + - const: rx + - const: tx-180 + - const: rx-180 + + interrupts: + minItems: 11 + + interrupt-names: + items: + - const: macirq + - const: eth_wake_irq + - const: eth_lpi + - const: rx-queue-0 + - const: rx-queue-1 + - const: rx-queue-2 + - const: rx-queue-3 + - const: tx-queue-0 + - const: tx-queue-1 + - const: tx-queue-2 + - const: tx-queue-3 + + resets: + items: + - description: AXI power-on system reset + +required: + - compatible + - reg + - clocks + - clock-names + - interrupts + - interrupt-names + - resets + +allOf: + - $ref: snps,dwmac.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/renesas-cpg-mssr.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + ethernet@15c30000 { + compatible = "renesas,r9a09g057-gbeth", "renesas,rzv2h-gbeth", "snps,dwmac-5.20"; + reg = <0x15c30000 0x10000>; + clocks = <&cpg CPG_MOD 0xbd>, <&cpg CPG_MOD 0xbc>, + <&ptp_clock>, <&cpg CPG_MOD 0xb8>, + <&cpg CPG_MOD 0xb9>, <&cpg CPG_MOD 0xba>, + <&cpg CPG_MOD 0xbb>; + clock-names = "stmmaceth", "pclk", "ptp_ref", + "tx", "rx", "tx-180", "rx-180"; + resets = <&cpg 0xb0>; + interrupts = <GIC_SPI 765 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 767 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 766 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 772 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 773 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 774 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 745 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 768 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 769 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 770 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 771 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq", "eth_wake_irq", "eth_lpi", + "rx-queue-0", "rx-queue-1", "rx-queue-2", + "rx-queue-3", "tx-queue-0", "tx-queue-1", + "tx-queue-2", "tx-queue-3"; + phy-mode = "rgmii-id"; + snps,multicast-filter-bins = <256>; + snps,perfect-filter-entries = <128>; + rx-fifo-depth = <8192>; + tx-fifo-depth = <8192>; + snps,fixed-burst; + snps,force_thresh_dma_mode; + snps,axi-config = <&stmmac_axi_setup>; + snps,mtl-rx-config = <&mtl_rx_setup>; + snps,mtl-tx-config = <&mtl_tx_setup>; + snps,txpbl = <32>; + snps,rxpbl = <32>; + phy-handle = <&phy0>; + + stmmac_axi_setup: stmmac-axi-config { + snps,lpi_en; + snps,wr_osr_lmt = <0xf>; + snps,rd_osr_lmt = <0xf>; + snps,blen = <16 8 4 0 0 0 0>; + }; + + mtl_rx_setup: rx-queues-config { + snps,rx-queues-to-use = <4>; + snps,rx-sched-sp; + + queue0 { + snps,dcb-algorithm; + snps,priority = <0x1>; + snps,map-to-dma-channel = <0>; + }; + + queue1 { + snps,dcb-algorithm; + snps,priority = <0x2>; + snps,map-to-dma-channel = <1>; + }; + + queue2 { + snps,dcb-algorithm; + snps,priority = <0x4>; + snps,map-to-dma-channel = <2>; + }; + + queue3 { + snps,dcb-algorithm; + snps,priority = <0x8>; + snps,map-to-dma-channel = <3>; + }; + }; + + mtl_tx_setup: tx-queues-config { + snps,tx-queues-to-use = <4>; + + queue0 { + snps,dcb-algorithm; + snps,priority = <0x1>; + }; + + queue1 { + snps,dcb-algorithm; + snps,priority = <0x2>; + }; + + queue2 { + snps,dcb-algorithm; + snps,priority = <0x4>; + }; + + queue3 { + snps,dcb-algorithm; + snps,priority = <0x1>; + }; + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + + phy0: ethernet-phy@0 { + reg = <0>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/rfkill-gpio.yaml b/Documentation/devicetree/bindings/net/rfkill-gpio.yaml index 9630c8466fac..4a706a41ab38 100644 --- a/Documentation/devicetree/bindings/net/rfkill-gpio.yaml +++ b/Documentation/devicetree/bindings/net/rfkill-gpio.yaml @@ -32,6 +32,10 @@ properties: shutdown-gpios: maxItems: 1 + default-blocked: + $ref: /schemas/types.yaml#/definitions/flag + description: configure rfkill state as blocked at boot + required: - compatible - radio-type @@ -48,4 +52,5 @@ examples: label = "rfkill-pcie-wlan"; radio-type = "wlan"; shutdown-gpios = <&gpio2 25 GPIO_ACTIVE_HIGH>; + default-blocked; }; diff --git a/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml b/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml index f8a576611d6c..0ac7c4b47d6b 100644 --- a/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml +++ b/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml @@ -24,6 +24,7 @@ select: - rockchip,rk3366-gmac - rockchip,rk3368-gmac - rockchip,rk3399-gmac + - rockchip,rk3528-gmac - rockchip,rk3568-gmac - rockchip,rk3576-gmac - rockchip,rk3588-gmac @@ -32,9 +33,6 @@ select: required: - compatible -allOf: - - $ref: snps,dwmac.yaml# - properties: compatible: oneOf: @@ -52,14 +50,25 @@ properties: - rockchip,rv1108-gmac - items: - enum: + - rockchip,rk3528-gmac - rockchip,rk3568-gmac - rockchip,rk3576-gmac - rockchip,rk3588-gmac - rockchip,rv1126-gmac - const: snps,dwmac-4.20a + interrupts: + minItems: 1 + maxItems: 2 + + interrupt-names: + minItems: 1 + items: + - const: macirq + - const: eth_wake_irq + clocks: - minItems: 5 + minItems: 4 maxItems: 8 clock-names: @@ -114,6 +123,36 @@ required: - compatible - clocks - clock-names + - rockchip,grf + +allOf: + - $ref: snps,dwmac.yaml# + + - if: + properties: + compatible: + contains: + enum: + - rockchip,rk3576-gmac + - rockchip,rk3588-gmac + then: + required: + - rockchip,php-grf + else: + properties: + rockchip,php-grf: false + + - if: + not: + properties: + compatible: + contains: + enum: + - rockchip,rk3528-gmac + then: + properties: + clocks: + minItems: 5 unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/net/smsc,lan9115.yaml b/Documentation/devicetree/bindings/net/smsc,lan9115.yaml index f86667cbcca8..42279ae8c2b9 100644 --- a/Documentation/devicetree/bindings/net/smsc,lan9115.yaml +++ b/Documentation/devicetree/bindings/net/smsc,lan9115.yaml @@ -11,6 +11,7 @@ maintainers: allOf: - $ref: ethernet-controller.yaml# + - $ref: /schemas/memory-controllers/mc-peripheral-props.yaml# properties: compatible: @@ -89,10 +90,7 @@ required: - reg - interrupts -# There are lots of bus-specific properties ("qcom,*", "samsung,*", "fsl,*", -# "gpmc,*", ...) to be found, that actually depend on the compatible value of -# the parent node. -additionalProperties: true +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml index 91e75eb3f329..90b79283e228 100644 --- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml +++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml @@ -32,6 +32,7 @@ select: - snps,dwmac-4.20a - snps,dwmac-5.10a - snps,dwmac-5.20 + - snps,dwmac-5.30a - snps,dwxgmac - snps,dwxgmac-2.10 @@ -74,6 +75,7 @@ properties: - qcom,sm8150-ethqos - renesas,r9a06g032-gmac - renesas,rzn1-gmac + - renesas,rzv2h-gbeth - rockchip,px30-gmac - rockchip,rk3128-gmac - rockchip,rk3228-gmac @@ -98,10 +100,13 @@ properties: - snps,dwmac-4.20a - snps,dwmac-5.10a - snps,dwmac-5.20 + - snps,dwmac-5.30a - snps,dwxgmac - snps,dwxgmac-2.10 + - sophgo,sg2044-dwmac - starfive,jh7100-dwmac - starfive,jh7110-dwmac + - tesla,fsd-ethqos - thead,th1520-gmac reg: @@ -110,23 +115,29 @@ properties: interrupts: minItems: 1 - items: - - description: Combined signal for various interrupt events - - description: The interrupt to manage the remote wake-up packet detection - - description: The interrupt that occurs when Rx exits the LPI state - - description: The interrupt that occurs when HW safety error triggered + maxItems: 11 interrupt-names: minItems: 1 + maxItems: 11 items: - - const: macirq - - enum: [eth_wake_irq, eth_lpi, sfty] - - enum: [eth_wake_irq, eth_lpi, sfty] - - enum: [eth_wake_irq, eth_lpi, sfty] + oneOf: + - description: Combined signal for various interrupt events + const: macirq + - description: The interrupt to manage the remote wake-up packet detection + const: eth_wake_irq + - description: The interrupt that occurs when Rx exits the LPI state + const: eth_lpi + - description: The interrupt that occurs when HW safety error triggered + const: sfty + - description: Per channel receive completion interrupt + pattern: '^rx-queue-[0-3]$' + - description: Per channel transmit completion interrupt + pattern: '^tx-queue-[0-3]$' clocks: minItems: 1 - maxItems: 8 + maxItems: 10 additionalItems: true items: - description: GMAC main clock @@ -138,7 +149,7 @@ properties: clock-names: minItems: 1 - maxItems: 8 + maxItems: 10 additionalItems: true contains: enum: @@ -490,6 +501,7 @@ properties: snps,en-tx-lpi-clockgating: $ref: /schemas/types.yaml#/definitions/flag + deprecated: true description: Enable gating of the MAC TX clock during TX low-power mode @@ -631,6 +643,7 @@ allOf: - snps,dwmac-4.20a - snps,dwmac-5.10a - snps,dwmac-5.20 + - snps,dwmac-5.30a - snps,dwxgmac - snps,dwxgmac-2.10 - st,spear600-gmac @@ -697,7 +710,7 @@ examples: }; }; - mdio0 { + mdio { #address-cells = <1>; #size-cells = <0>; compatible = "snps,dwmac-mdio"; diff --git a/Documentation/devicetree/bindings/net/sophgo,sg2044-dwmac.yaml b/Documentation/devicetree/bindings/net/sophgo,sg2044-dwmac.yaml new file mode 100644 index 000000000000..4dd2dc9c678b --- /dev/null +++ b/Documentation/devicetree/bindings/net/sophgo,sg2044-dwmac.yaml @@ -0,0 +1,126 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/sophgo,sg2044-dwmac.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sophgo SG2044 DWMAC glue layer + +maintainers: + - Inochi Amaoto <inochiama@gmail.com> + +select: + properties: + compatible: + contains: + enum: + - sophgo,sg2044-dwmac + required: + - compatible + +properties: + compatible: + items: + - const: sophgo,sg2044-dwmac + - const: snps,dwmac-5.30a + + reg: + maxItems: 1 + + clocks: + items: + - description: GMAC main clock + - description: PTP clock + - description: TX clock + + clock-names: + items: + - const: stmmaceth + - const: ptp_ref + - const: tx + + dma-noncoherent: true + + interrupts: + maxItems: 1 + + interrupt-names: + maxItems: 1 + + resets: + maxItems: 1 + + reset-names: + const: stmmaceth + +required: + - compatible + - reg + - clocks + - clock-names + - interrupts + - interrupt-names + - resets + - reset-names + +allOf: + - $ref: snps,dwmac.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + ethernet@30006000 { + compatible = "sophgo,sg2044-dwmac", "snps,dwmac-5.30a"; + reg = <0x30006000 0x4000>; + clocks = <&clk 151>, <&clk 152>, <&clk 154>; + clock-names = "stmmaceth", "ptp_ref", "tx"; + interrupt-parent = <&intc>; + interrupts = <296 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + resets = <&rst 30>; + reset-names = "stmmaceth"; + snps,multicast-filter-bins = <0>; + snps,perfect-filter-entries = <1>; + snps,aal; + snps,tso; + snps,txpbl = <32>; + snps,rxpbl = <32>; + snps,mtl-rx-config = <&gmac0_mtl_rx_setup>; + snps,mtl-tx-config = <&gmac0_mtl_tx_setup>; + snps,axi-config = <&gmac0_stmmac_axi_setup>; + status = "disabled"; + + gmac0_mtl_rx_setup: rx-queues-config { + snps,rx-queues-to-use = <8>; + snps,rx-sched-wsp; + queue0 {}; + queue1 {}; + queue2 {}; + queue3 {}; + queue4 {}; + queue5 {}; + queue6 {}; + queue7 {}; + }; + + gmac0_mtl_tx_setup: tx-queues-config { + snps,tx-queues-to-use = <8>; + queue0 {}; + queue1 {}; + queue2 {}; + queue3 {}; + queue4 {}; + queue5 {}; + queue6 {}; + queue7 {}; + }; + + gmac0_stmmac_axi_setup: stmmac-axi-config { + snps,blen = <16 8 4 0 0 0 0>; + snps,wr_osr_lmt = <1>; + snps,rd_osr_lmt = <2>; + }; + }; diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml index 85cea9966a27..987254900d0d 100644 --- a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml +++ b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml @@ -54,6 +54,16 @@ properties: items: - const: stmmaceth + interrupts: + minItems: 1 + maxItems: 2 + + interrupt-names: + minItems: 1 + items: + - const: macirq + - const: eth_wake_irq + clocks: minItems: 3 items: diff --git a/Documentation/devicetree/bindings/net/tesla,fsd-ethqos.yaml b/Documentation/devicetree/bindings/net/tesla,fsd-ethqos.yaml new file mode 100644 index 000000000000..dd7481bb16e5 --- /dev/null +++ b/Documentation/devicetree/bindings/net/tesla,fsd-ethqos.yaml @@ -0,0 +1,118 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/tesla,fsd-ethqos.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: FSD Ethernet Quality of Service + +maintainers: + - Swathi K S <swathi.ks@samsung.com> + +description: + Tesla ethernet devices based on dwmmac support Gigabit ethernet. + +allOf: + - $ref: snps,dwmac.yaml# + +properties: + compatible: + const: tesla,fsd-ethqos + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + interrupt-names: + items: + - const: macirq + + clocks: + minItems: 5 + items: + - description: PTP clock + - description: Master bus clock + - description: Slave bus clock + - description: MAC TX clock + - description: MAC RX clock + - description: Master2 bus clock + - description: Slave2 bus clock + - description: RX MUX clock + - description: PHY RX clock + - description: PERIC RGMII clock + + clock-names: + minItems: 5 + items: + - const: ptp_ref + - const: master_bus + - const: slave_bus + - const: tx + - const: rx + - const: master2_bus + - const: slave2_bus + - const: eqos_rxclk_mux + - const: eqos_phyrxclk + - const: dout_peric_rgmii_clk + + iommus: + maxItems: 1 + + phy-mode: + enum: + - rgmii + - rgmii-id + - rgmii-rxid + - rgmii-txid + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - iommus + - phy-mode + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/fsd-clk.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + soc { + #address-cells = <2>; + #size-cells = <2>; + ethernet1: ethernet@14300000 { + compatible = "tesla,fsd-ethqos"; + reg = <0x0 0x14300000 0x0 0x10000>; + interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + clocks = <&clock_peric PERIC_EQOS_TOP_IPCLKPORT_CLK_PTP_REF_I>, + <&clock_peric PERIC_EQOS_TOP_IPCLKPORT_ACLK_I>, + <&clock_peric PERIC_EQOS_TOP_IPCLKPORT_HCLK_I>, + <&clock_peric PERIC_EQOS_TOP_IPCLKPORT_RGMII_CLK_I>, + <&clock_peric PERIC_EQOS_TOP_IPCLKPORT_CLK_RX_I>, + <&clock_peric PERIC_BUS_D_PERIC_IPCLKPORT_EQOSCLK>, + <&clock_peric PERIC_BUS_P_PERIC_IPCLKPORT_EQOSCLK>, + <&clock_peric PERIC_EQOS_PHYRXCLK_MUX>, + <&clock_peric PERIC_EQOS_PHYRXCLK>, + <&clock_peric PERIC_DOUT_RGMII_CLK>; + clock-names = "ptp_ref", "master_bus", "slave_bus","tx", + "rx", "master2_bus", "slave2_bus", "eqos_rxclk_mux", + "eqos_phyrxclk","dout_peric_rgmii_clk"; + assigned-clocks = <&clock_peric PERIC_EQOS_PHYRXCLK_MUX>, + <&clock_peric PERIC_EQOS_PHYRXCLK>; + assigned-clock-parents = <&clock_peric PERIC_EQOS_PHYRXCLK>; + pinctrl-names = "default"; + pinctrl-0 = <ð1_tx_clk>, <ð1_tx_data>, <ð1_tx_ctrl>, + <ð1_phy_intr>, <ð1_rx_clk>, <ð1_rx_data>, + <ð1_rx_ctrl>, <ð1_mdio>; + iommus = <&smmu_peric 0x0 0x1>; + phy-mode = "rgmii-id"; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/net/ti,dp83822.yaml b/Documentation/devicetree/bindings/net/ti,dp83822.yaml index 50c24248df26..28a0bddb9af9 100644 --- a/Documentation/devicetree/bindings/net/ti,dp83822.yaml +++ b/Documentation/devicetree/bindings/net/ti,dp83822.yaml @@ -122,6 +122,9 @@ properties: - free-running - recovered + mac-termination-ohms: + enum: [43, 44, 46, 48, 50, 53, 55, 58, 61, 65, 69, 73, 78, 84, 91, 99] + required: - reg @@ -137,6 +140,7 @@ examples: rx-internal-delay-ps = <1>; tx-internal-delay-ps = <1>; ti,gpio2-clk-out = "xi"; + mac-termination-ohms = <43>; }; }; diff --git a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml index b11894fbaec4..7b3d948f187d 100644 --- a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml +++ b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml @@ -143,6 +143,8 @@ properties: label: description: label associated with this port + fixed-link: true + ti,mac-only: $ref: /schemas/types.yaml#/definitions/flag description: diff --git a/Documentation/devicetree/bindings/net/toshiba,visconti-dwmac.yaml b/Documentation/devicetree/bindings/net/toshiba,visconti-dwmac.yaml index 052f636158b3..f0f32e18fc85 100644 --- a/Documentation/devicetree/bindings/net/toshiba,visconti-dwmac.yaml +++ b/Documentation/devicetree/bindings/net/toshiba,visconti-dwmac.yaml @@ -42,6 +42,12 @@ properties: - const: stmmaceth - const: phy_ref_clk + interrupts: + maxItems: 1 + + interrupt-names: + const: macirq + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/net/vertexcom-mse102x.yaml b/Documentation/devicetree/bindings/net/vertexcom-mse102x.yaml index 4158673f723c..8359de7ad272 100644 --- a/Documentation/devicetree/bindings/net/vertexcom-mse102x.yaml +++ b/Documentation/devicetree/bindings/net/vertexcom-mse102x.yaml @@ -63,7 +63,7 @@ examples: compatible = "vertexcom,mse1021"; reg = <0>; interrupt-parent = <&gpio>; - interrupts = <23 IRQ_TYPE_EDGE_RISING>; + interrupts = <23 IRQ_TYPE_LEVEL_HIGH>; spi-cpha; spi-cpol; spi-max-frequency = <7142857>; diff --git a/Documentation/devicetree/bindings/net/via,vt8500-rhine.yaml b/Documentation/devicetree/bindings/net/via,vt8500-rhine.yaml new file mode 100644 index 000000000000..e663d5a2f014 --- /dev/null +++ b/Documentation/devicetree/bindings/net/via,vt8500-rhine.yaml @@ -0,0 +1,41 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/via,vt8500-rhine.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: VIA Rhine 10/100 Network Controller + +description: + VIA's Ethernet controller integrated into VIA VT8500, + WonderMedia WM8950 and related SoCs + +maintainers: + - Alexey Charkov <alchark@gmail.com> + +allOf: + - $ref: ethernet-controller.yaml# + +properties: + compatible: + const: via,vt8500-rhine + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - reg + - interrupts + +unevaluatedProperties: false + +examples: + - | + ethernet@d8004000 { + compatible = "via,vt8500-rhine"; + reg = <0xd8004000 0x100>; + interrupts = <10>; + }; diff --git a/Documentation/devicetree/bindings/net/via-rhine.txt b/Documentation/devicetree/bindings/net/via-rhine.txt deleted file mode 100644 index 334eca2bf937..000000000000 --- a/Documentation/devicetree/bindings/net/via-rhine.txt +++ /dev/null @@ -1,17 +0,0 @@ -* VIA Rhine 10/100 Network Controller - -Required properties: -- compatible : Should be "via,vt8500-rhine" for integrated - Rhine controllers found in VIA VT8500, WonderMedia WM8950 - and similar. These are listed as 1106:3106 rev. 0x84 on the - virtual PCI bus under vendor-provided kernels -- reg : Address and length of the io space -- interrupts : Should contain the controller interrupt line - -Examples: - -ethernet@d8004000 { - compatible = "via,vt8500-rhine"; - reg = <0xd8004000 0x100>; - interrupts = <10>; -}; diff --git a/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml b/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml index a3607d55ef36..7c8100e59a6c 100644 --- a/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml +++ b/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml @@ -16,7 +16,7 @@ description: binding. allOf: - - $ref: ieee80211.yaml# + - $ref: /schemas/net/wireless/wireless-controller.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml index 070c4c9b8643..f2440d39b7eb 100644 --- a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml +++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml @@ -7,7 +7,6 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Technologies ath10k wireless devices maintainers: - - Kalle Valo <kvalo@kernel.org> - Jeff Johnson <jjohnson@kernel.org> description: @@ -93,20 +92,41 @@ properties: ieee80211-freq-limit: true + qcom,calibration-data: + $ref: /schemas/types.yaml#/definitions/uint8-array + description: + Calibration data + board-specific data as a byte array. The length + can vary between hardware versions. + qcom,ath10k-calibration-data: $ref: /schemas/types.yaml#/definitions/uint8-array + deprecated: true description: Calibration data + board-specific data as a byte array. The length can vary between hardware versions. + qcom,calibration-variant: + $ref: /schemas/types.yaml#/definitions/string + description: + Unique variant identifier of the calibration data in board-2.bin + for designs with colliding bus and device specific ids + qcom,ath10k-calibration-variant: $ref: /schemas/types.yaml#/definitions/string + deprecated: true description: Unique variant identifier of the calibration data in board-2.bin for designs with colliding bus and device specific ids + qcom,pre-calibration-data: + $ref: /schemas/types.yaml#/definitions/uint8-array + description: + Pre-calibration data as a byte array. The length can vary between + hardware versions. + qcom,ath10k-pre-calibration-data: $ref: /schemas/types.yaml#/definitions/uint8-array + deprecated: true description: Pre-calibration data as a byte array. The length can vary between hardware versions. diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k-pci.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k-pci.yaml index a71fdf05bc1e..653b319fee88 100644 --- a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k-pci.yaml +++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k-pci.yaml @@ -8,7 +8,6 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Technologies ath11k wireless devices (PCIe) maintainers: - - Kalle Valo <kvalo@kernel.org> - Jeff Johnson <jjohnson@kernel.org> description: | @@ -23,8 +22,15 @@ properties: reg: maxItems: 1 + qcom,calibration-variant: + $ref: /schemas/types.yaml#/definitions/string + description: | + string to uniquely identify variant of the calibration data for designs + with colliding bus and device ids + qcom,ath11k-calibration-variant: $ref: /schemas/types.yaml#/definitions/string + deprecated: true description: | string to uniquely identify variant of the calibration data for designs with colliding bus and device ids @@ -128,7 +134,7 @@ examples: vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>; - qcom,ath11k-calibration-variant = "LE_X13S"; + qcom,calibration-variant = "LE_X13S"; }; }; }; diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml index ff5763dc66a8..c089677702cf 100644 --- a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml +++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml @@ -8,7 +8,6 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Technologies ath11k wireless devices maintainers: - - Kalle Valo <kvalo@kernel.org> - Jeff Johnson <jjohnson@kernel.org> description: | @@ -42,8 +41,15 @@ properties: * reg * reg-names + qcom,calibration-variant: + $ref: /schemas/types.yaml#/definitions/string + description: + string to uniquely identify variant of the calibration data in the + board-2.bin for designs with colliding bus and device specific ids + qcom,ath11k-calibration-variant: $ref: /schemas/types.yaml#/definitions/string + deprecated: true description: string to uniquely identify variant of the calibration data in the board-2.bin for designs with colliding bus and device specific ids diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath12k-wsi.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ath12k-wsi.yaml index cbfb559f6b69..589960144fe1 100644 --- a/Documentation/devicetree/bindings/net/wireless/qcom,ath12k-wsi.yaml +++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath12k-wsi.yaml @@ -9,7 +9,6 @@ title: Qualcomm Technologies ath12k wireless devices (PCIe) with WSI interface maintainers: - Jeff Johnson <jjohnson@kernel.org> - - Kalle Valo <kvalo@kernel.org> description: | Qualcomm Technologies IEEE 802.11be PCIe devices with WSI interface. @@ -53,8 +52,15 @@ properties: reg: maxItems: 1 + qcom,calibration-variant: + $ref: /schemas/types.yaml#/definitions/string + description: + String to uniquely identify variant of the calibration data for designs + with colliding bus and device ids + qcom,ath12k-calibration-variant: $ref: /schemas/types.yaml#/definitions/string + deprecated: true description: String to uniquely identify variant of the calibration data for designs with colliding bus and device ids @@ -104,7 +110,7 @@ examples: compatible = "pci17cb,1109"; reg = <0x0 0x0 0x0 0x0 0x0>; - qcom,ath12k-calibration-variant = "RDP433_1"; + qcom,calibration-variant = "RDP433_1"; ports { #address-cells = <1>; @@ -140,7 +146,7 @@ examples: compatible = "pci17cb,1109"; reg = <0x0 0x0 0x0 0x0 0x0>; - qcom,ath12k-calibration-variant = "RDP433_2"; + qcom,calibration-variant = "RDP433_2"; qcom,wsi-controller; ports { @@ -177,7 +183,7 @@ examples: compatible = "pci17cb,1109"; reg = <0x0 0x0 0x0 0x0 0x0>; - qcom,ath12k-calibration-variant = "RDP433_3"; + qcom,calibration-variant = "RDP433_3"; ports { #address-cells = <1>; diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath12k.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ath12k.yaml index 1b5884015b15..dc68dd59988f 100644 --- a/Documentation/devicetree/bindings/net/wireless/qcom,ath12k.yaml +++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath12k.yaml @@ -9,7 +9,6 @@ title: Qualcomm Technologies ath12k wireless devices (PCIe) maintainers: - Jeff Johnson <quic_jjohnson@quicinc.com> - - Kalle Valo <kvalo@kernel.org> description: Qualcomm Technologies IEEE 802.11be PCIe devices. @@ -22,6 +21,12 @@ properties: reg: maxItems: 1 + firmware-name: + maxItems: 1 + description: + If present, a board or platform specific string used to lookup + usecase-specific firmware files for the device. + vddaon-supply: description: VDD_AON supply regulator handle diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ipq5332-wifi.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ipq5332-wifi.yaml new file mode 100644 index 000000000000..363a0ecb6ad9 --- /dev/null +++ b/Documentation/devicetree/bindings/net/wireless/qcom,ipq5332-wifi.yaml @@ -0,0 +1,315 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (c) 2024-2025 Qualcomm Innovation Center, Inc. All rights reserved. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/wireless/qcom,ipq5332-wifi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies ath12k wireless devices (AHB) + +maintainers: + - Jeff Johnson <jjohnson@kernel.org> + +description: + Qualcomm Technologies IEEE 802.11be AHB devices. + +properties: + compatible: + enum: + - qcom,ipq5332-wifi + + reg: + maxItems: 1 + + clocks: + items: + - description: XO clock used for copy engine + + clock-names: + items: + - const: xo + + interrupts: + items: + - description: Fatal interrupt + - description: Ready interrupt + - description: Spawn acknowledge interrupt + - description: Stop acknowledge interrupt + - description: misc-pulse1 interrupt events + - description: misc-latch interrupt events + - description: sw exception interrupt events + - description: interrupt event for ring CE0 + - description: interrupt event for ring CE1 + - description: interrupt event for ring CE2 + - description: interrupt event for ring CE3 + - description: interrupt event for ring CE4 + - description: interrupt event for ring CE5 + - description: interrupt event for ring CE6 + - description: interrupt event for ring CE7 + - description: interrupt event for ring CE8 + - description: interrupt event for ring CE9 + - description: interrupt event for ring CE10 + - description: interrupt event for ring CE11 + - description: interrupt event for ring host2wbm-desc-feed + - description: interrupt event for ring host2reo-re-injection + - description: interrupt event for ring host2reo-command + - description: interrupt event for ring host2rxdma-monitor-ring1 + - description: interrupt event for ring reo2ost-exception + - description: interrupt event for ring wbm2host-rx-release + - description: interrupt event for ring reo2host-status + - description: interrupt event for ring reo2host-destination-ring4 + - description: interrupt event for ring reo2host-destination-ring3 + - description: interrupt event for ring reo2host-destination-ring2 + - description: interrupt event for ring reo2host-destination-ring1 + - description: interrupt event for ring rxdma2host-monitor-destination-mac3 + - description: interrupt event for ring rxdma2host-monitor-destination-mac2 + - description: interrupt event for ring rxdma2host-monitor-destination-mac1 + - description: interrupt event for ring host2rxdma-host-buf-ring-mac3 + - description: interrupt event for ring host2rxdma-host-buf-ring-mac2 + - description: interrupt event for ring host2rxdma-host-buf-ring-mac1 + - description: interrupt event for ring host2tcl-input-ring4 + - description: interrupt event for ring host2tcl-input-ring3 + - description: interrupt event for ring host2tcl-input-ring2 + - description: interrupt event for ring host2tcl-input-ring1 + - description: interrupt event for ring wbm2host-tx-completions-ring4 + - description: interrupt event for ring wbm2host-tx-completions-ring3 + - description: interrupt event for ring wbm2host-tx-completions-ring2 + - description: interrupt event for ring wbm2host-tx-completions-ring1 + - description: interrupt event for ring host2tx-monitor-ring1 + - description: interrupt event for ring txmon2host-monitor-destination-mac3 + - description: interrupt event for ring txmon2host-monitor-destination-mac2 + - description: interrupt event for ring txmon2host-monitor-destination-mac1 + - description: interrupt event for umac-reset + + interrupt-names: + items: + - const: fatal + - const: ready + - const: spawn + - const: stop-ack + - const: misc-pulse1 + - const: misc-latch + - const: sw-exception + - const: ce0 + - const: ce1 + - const: ce2 + - const: ce3 + - const: ce4 + - const: ce5 + - const: ce6 + - const: ce7 + - const: ce8 + - const: ce9 + - const: ce10 + - const: ce11 + - const: host2wbm-desc-feed + - const: host2reo-re-injection + - const: host2reo-command + - const: host2rxdma-monitor-ring1 + - const: reo2ost-exception + - const: wbm2host-rx-release + - const: reo2host-status + - const: reo2host-destination-ring4 + - const: reo2host-destination-ring3 + - const: reo2host-destination-ring2 + - const: reo2host-destination-ring1 + - const: rxdma2host-monitor-destination-mac3 + - const: rxdma2host-monitor-destination-mac2 + - const: rxdma2host-monitor-destination-mac1 + - const: host2rxdma-host-buf-ring-mac3 + - const: host2rxdma-host-buf-ring-mac2 + - const: host2rxdma-host-buf-ring-mac1 + - const: host2tcl-input-ring4 + - const: host2tcl-input-ring3 + - const: host2tcl-input-ring2 + - const: host2tcl-input-ring1 + - const: wbm2host-tx-completions-ring4 + - const: wbm2host-tx-completions-ring3 + - const: wbm2host-tx-completions-ring2 + - const: wbm2host-tx-completions-ring1 + - const: host2tx-monitor-ring1 + - const: txmon2host-monitor-destination-mac3 + - const: txmon2host-monitor-destination-mac2 + - const: txmon2host-monitor-destination-mac1 + - const: umac-reset + + memory-region: + description: + Memory regions used by the ath12k firmware. + items: + - description: Q6 memory region + - description: m3 dump memory region + - description: Q6 caldata memory region + - description: Multi Link Operation (MLO) Global memory region + + memory-region-names: + items: + - const: q6-region + - const: m3-dump + - const: q6-caldb + - const: mlo-global-mem + + qcom,calibration-variant: + $ref: /schemas/types.yaml#/definitions/string + description: + String to uniquely identify variant of the calibration data for designs + with colliding bus and device ids + + qcom,rproc: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the Qualcomm Hexagon DSP(q6 remote processor), which is utilized + for offloading WiFi processing tasks, this q6 remote processor operates in + conjunction with WiFi. + + qcom,smem-states: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: States used by the AP to signal the remote processor + items: + - description: Shutdown WCSS pd + - description: Stop WCSS pd + - description: Spawn WCSS pd + + qcom,smem-state-names: + description: + Names of the states used by the AP to signal the remote processor + items: + - const: shutdown + - const: stop + - const: spawn + +required: + - compatible + - reg + - clocks + - clock-names + - interrupts + - interrupt-names + - memory-region + - memory-region-names + - qcom,rproc + - qcom,smem-states + - qcom,smem-state-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/qcom,ipq5332-gcc.h> + + wifi0: wifi@c000000 { + compatible = "qcom,ipq5332-wifi"; + reg = <0x0c000000 0x1000000>; + clocks = <&gcc GCC_XO_CLK>; + clock-names = "xo"; + interrupts-extended = <&wcss_smp2p_in 8 IRQ_TYPE_NONE>, + <&wcss_smp2p_in 9 IRQ_TYPE_NONE>, + <&wcss_smp2p_in 12 IRQ_TYPE_NONE>, + <&wcss_smp2p_in 11 IRQ_TYPE_NONE>, + <&intc GIC_SPI 559 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 560 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 561 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 422 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 423 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 424 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 425 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 426 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 427 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 428 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 429 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 430 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 431 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 432 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 433 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 491 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 495 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 493 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 544 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 457 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 466 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 497 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 454 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 453 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 452 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 451 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 488 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 488 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 484 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 554 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 554 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 549 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 507 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 500 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 499 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 498 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 450 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 449 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 448 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 447 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 543 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 486 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 486 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 482 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 419 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "fatal", + "ready", + "spawn", + "stop-ack", + "misc-pulse1", + "misc-latch", + "sw-exception", + "ce0", + "ce1", + "ce2", + "ce3", + "ce4", + "ce5", + "ce6", + "ce7", + "ce8", + "ce9", + "ce10", + "ce11", + "host2wbm-desc-feed", + "host2reo-re-injection", + "host2reo-command", + "host2rxdma-monitor-ring1", + "reo2ost-exception", + "wbm2host-rx-release", + "reo2host-status", + "reo2host-destination-ring4", + "reo2host-destination-ring3", + "reo2host-destination-ring2", + "reo2host-destination-ring1", + "rxdma2host-monitor-destination-mac3", + "rxdma2host-monitor-destination-mac2", + "rxdma2host-monitor-destination-mac1", + "host2rxdma-host-buf-ring-mac3", + "host2rxdma-host-buf-ring-mac2", + "host2rxdma-host-buf-ring-mac1", + "host2tcl-input-ring4", + "host2tcl-input-ring3", + "host2tcl-input-ring2", + "host2tcl-input-ring1", + "wbm2host-tx-completions-ring4", + "wbm2host-tx-completions-ring3", + "wbm2host-tx-completions-ring2", + "wbm2host-tx-completions-ring1", + "host2tx-monitor-ring1", + "txmon2host-monitor-destination-mac3", + "txmon2host-monitor-destination-mac2", + "txmon2host-monitor-destination-mac1", + "umac-reset"; + + memory-region = <&q6_region>, <&m3_dump>, <&q6_caldb>, <&mlo_mem>; + memory-region-names = "q6-region", "m3-dump", "q6-caldb", "mlo-global-mem"; + qcom,calibration-variant = "RDP441_1"; + qcom,rproc = <&q6v5_wcss>; + qcom,smem-states = <&wcss_smp2p_out 8>, + <&wcss_smp2p_out 9>, + <&wcss_smp2p_out 10>; + qcom,smem-state-names = "shutdown", + "stop", + "spawn"; + }; diff --git a/Documentation/devicetree/bindings/net/wireless/realtek,rtl8188e.yaml b/Documentation/devicetree/bindings/net/wireless/realtek,rtl8188e.yaml new file mode 100644 index 000000000000..2769731e0708 --- /dev/null +++ b/Documentation/devicetree/bindings/net/wireless/realtek,rtl8188e.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/wireless/realtek,rtl8188e.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Realtek RTL8188E USB WiFi + +maintainers: + - J. Neuschäfer <j.ne@posteo.net> + +description: + Realtek RTL8188E is a family of USB-connected 2.4 GHz WiFi modules. + +allOf: + - $ref: /schemas/usb/usb-device.yaml# + +properties: + compatible: + const: usbbda,179 # RTL8188ETV + + reg: true + + vdd-supply: + description: + Regulator for the 3V3 supply. + +required: + - compatible + - reg + - vdd-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + usb { + #address-cells = <1>; + #size-cells = <0>; + + wifi: wifi@1 { + compatible = "usbbda,179"; + reg = <1>; + vdd-supply = <&vcc3v3>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/net/wireless/silabs,wfx.yaml b/Documentation/devicetree/bindings/net/wireless/silabs,wfx.yaml index 84e5659e50ef..6c0888ae4c4e 100644 --- a/Documentation/devicetree/bindings/net/wireless/silabs,wfx.yaml +++ b/Documentation/devicetree/bindings/net/wireless/silabs,wfx.yaml @@ -71,15 +71,12 @@ properties: "Platform Data Set" in Silabs jargon). Default depends of "compatible" string. For "silabs,wf200", the default is 'wf200.pds'. - local-mac-address: true - - mac-address: true - required: - compatible - reg allOf: + - $ref: /schemas/net/wireless/wireless-controller.yaml# - $ref: /schemas/spi/spi-peripheral-props.yaml# unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/net/wireless/wireless-controller.yaml b/Documentation/devicetree/bindings/net/wireless/wireless-controller.yaml new file mode 100644 index 000000000000..7379f6c1aa05 --- /dev/null +++ b/Documentation/devicetree/bindings/net/wireless/wireless-controller.yaml @@ -0,0 +1,23 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/wireless/wireless-controller.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Wireless Controller Common Properties + +maintainers: + - Lorenzo Bianconi <lorenzo@kernel.org> + +properties: + $nodename: + pattern: "^wifi(@.*)?$" + +allOf: + - $ref: ieee80211.yaml# + - $ref: /schemas/net/network-class.yaml# + +additionalProperties: true + +... + |