1 files changed, 0 insertions, 49 deletions
diff --git a/Documentation/devicetree/bindings/clock/samsung,s3c2410-clock.txt b/Documentation/devicetree/bindings/clock/samsung,s3c2410-clock.txt
deleted file mode 100644
index 2632d3f13004..000000000000
--- a/Documentation/devicetree/bindings/clock/samsung,s3c2410-clock.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-* Samsung S3C2410 Clock Controller
-
-The S3C2410 clock controller generates and supplies clock to various controllers
-within the SoC. The clock binding described here is applicable to the s3c2410,
-s3c2440 and s3c2442 SoCs in the s3c24x family.
-
-Required Properties:
-
-- compatible: should be one of the following.
-  - "samsung,s3c2410-clock" - controller compatible with S3C2410 SoC.
-  - "samsung,s3c2440-clock" - controller compatible with S3C2440 SoC.
-  - "samsung,s3c2442-clock" - controller compatible with S3C2442 SoC.
-- reg: physical base address of the controller and length of memory mapped
-  region.
-- #clock-cells: should be 1.
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume. Some of the clocks are available only
-on a particular SoC.
-
-All available clocks are defined as preprocessor macros in
-dt-bindings/clock/s3c2410.h header and can be used in device
-tree sources.
-
-External clocks:
-
-The xti clock used as input for the plls is generated outside the SoC. It is
-expected that is are defined using standard clock bindings with a
-clock-output-names value of "xti".
-
-Example: Clock controller node:
-
-	clocks: clock-controller@4c000000 {
-		compatible = "samsung,s3c2410-clock";
-		reg = <0x4c000000 0x20>;
-		#clock-cells = <1>;
-	};
-
-Example: UART controller node that consumes the clock generated by the clock
-  controller (refer to the standard clock bindings for information about
-  "clocks" and "clock-names" properties):
-
-	serial@50004000 {
-		compatible = "samsung,s3c2440-uart";
-		reg = <0x50004000 0x4000>;
-		interrupts = <1 23 3 4>, <1 23 4 4>;
-		clock-names = "uart", "clk_uart_baud2";
-		clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>;
-	};