diff options
Diffstat (limited to 'Documentation/devicetree/bindings/ata')
3 files changed, 26 insertions, 12 deletions
diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.txt b/Documentation/devicetree/bindings/ata/ahci-platform.txt index c760ecb81381..f4006d3c9fdf 100644 --- a/Documentation/devicetree/bindings/ata/ahci-platform.txt +++ b/Documentation/devicetree/bindings/ata/ahci-platform.txt @@ -30,6 +30,7 @@ compatible: Optional properties: - dma-coherent : Present if dma operations are coherent - clocks : a list of phandle + clock specifier pairs +- resets : a list of phandle + reset specifier pairs - target-supply : regulator for SATA target power - phys : reference to the SATA PHY node - phy-names : must be "sata-phy" diff --git a/Documentation/devicetree/bindings/ata/imx-sata.txt b/Documentation/devicetree/bindings/ata/imx-sata.txt index a3d14719e478..781f88751762 100644 --- a/Documentation/devicetree/bindings/ata/imx-sata.txt +++ b/Documentation/devicetree/bindings/ata/imx-sata.txt @@ -7,6 +7,7 @@ Required properties: - compatible : should be one of the following: - "fsl,imx53-ahci" for i.MX53 SATA controller - "fsl,imx6q-ahci" for i.MX6Q SATA controller + - "fsl,imx6qp-ahci" for i.MX6QP SATA controller - interrupts : interrupt mapping for SATA IRQ - reg : registers mapping - clocks : list of clock specifiers, must contain an entry for each diff --git a/Documentation/devicetree/bindings/ata/nvidia,tegra124-ahci.txt b/Documentation/devicetree/bindings/ata/nvidia,tegra124-ahci.txt index 66c83c3e8915..12ab2f723eb0 100644 --- a/Documentation/devicetree/bindings/ata/nvidia,tegra124-ahci.txt +++ b/Documentation/devicetree/bindings/ata/nvidia,tegra124-ahci.txt @@ -1,9 +1,10 @@ -Tegra124 SoC SATA AHCI controller +Tegra SoC SATA AHCI controller Required properties : -- compatible : For Tegra124, must contain "nvidia,tegra124-ahci". Otherwise, - must contain '"nvidia,<chip>-ahci", "nvidia,tegra124-ahci"', where <chip> - is tegra132. +- compatible : Must be one of: + - Tegra124 : "nvidia,tegra124-ahci" + - Tegra132 : "nvidia,tegra132-ahci", "nvidia,tegra124-ahci" + - Tegra210 : "nvidia,tegra210-ahci" - reg : Should contain 2 entries: - AHCI register set (SATA BAR5) - SATA register set @@ -13,8 +14,6 @@ Required properties : - clock-names : Must include the following entries: - sata - sata-oob - - cml1 - - pll_e - resets : Must contain an entry for each entry in reset-names. See ../reset/reset.txt for details. - reset-names : Must include the following entries: @@ -24,9 +23,22 @@ Required properties : - phys : Must contain an entry for each entry in phy-names. See ../phy/phy-bindings.txt for details. - phy-names : Must include the following entries: - - sata-phy : XUSB PADCTL SATA PHY -- hvdd-supply : Defines the SATA HVDD regulator -- vddio-supply : Defines the SATA VDDIO regulator -- avdd-supply : Defines the SATA AVDD regulator -- target-5v-supply : Defines the SATA 5V power regulator -- target-12v-supply : Defines the SATA 12V power regulator + - For Tegra124 and Tegra132: + - sata-phy : XUSB PADCTL SATA PHY +- For Tegra124 and Tegra132: + - hvdd-supply : Defines the SATA HVDD regulator + - vddio-supply : Defines the SATA VDDIO regulator + - avdd-supply : Defines the SATA AVDD regulator + - target-5v-supply : Defines the SATA 5V power regulator + - target-12v-supply : Defines the SATA 12V power regulator + +Optional properties: +- reg : + - AUX register set +- clock-names : + - cml1 : + cml1 clock should be defined here if the PHY driver + doesn't manage them. If it does, they should not be. +- phy-names : + - For T210: + - sata-phy |