diff options
Diffstat (limited to 'Documentation/arm/samsung-s3c24xx/s3c2412.rst')
| -rw-r--r-- | Documentation/arm/samsung-s3c24xx/s3c2412.rst | 121 |
1 files changed, 0 insertions, 121 deletions
diff --git a/Documentation/arm/samsung-s3c24xx/s3c2412.rst b/Documentation/arm/samsung-s3c24xx/s3c2412.rst deleted file mode 100644 index 68b985fc6bf4..000000000000 --- a/Documentation/arm/samsung-s3c24xx/s3c2412.rst +++ /dev/null @@ -1,121 +0,0 @@ -========================== -S3C2412 ARM Linux Overview -========================== - -Introduction ------------- - - The S3C2412 is part of the S3C24XX range of ARM9 System-on-Chip CPUs - from Samsung. This part has an ARM926-EJS core, capable of running up - to 266MHz (see data-sheet for more information) - - -Clock ------ - - The core clock code provides a set of clocks to the drivers, and allows - for source selection and a number of other features. - - -Power ------ - - No support for suspend/resume to RAM in the current system. - - -DMA ---- - - No current support for DMA. - - -GPIO ----- - - There is support for setting the GPIO to input/output/special function - and reading or writing to them. - - -UART ----- - - The UART hardware is similar to the S3C2440, and is supported by the - s3c2410 driver in the drivers/serial directory. - - -NAND ----- - - The NAND hardware is similar to the S3C2440, and is supported by the - s3c2410 driver in the drivers/mtd/nand/raw directory. - - -USB Host --------- - - The USB hardware is similar to the S3C2410, with extended clock source - control. The OHCI portion is supported by the ohci-s3c2410 driver, and - the clock control selection is supported by the core clock code. - - -USB Device ----------- - - No current support in the kernel - - -IRQs ----- - - All the standard, and external interrupt sources are supported. The - extra sub-sources are not yet supported. - - -RTC ---- - - The RTC hardware is similar to the S3C2410, and is supported by the - s3c2410-rtc driver. - - -Watchdog --------- - - The watchdog hardware is the same as the S3C2410, and is supported by - the s3c2410_wdt driver. - - -MMC/SD/SDIO ------------ - - No current support for the MMC/SD/SDIO block. - -IIC ---- - - The IIC hardware is the same as the S3C2410, and is supported by the - i2c-s3c24xx driver. - - -IIS ---- - - No current support for the IIS interface. - - -SPI ---- - - No current support for the SPI interfaces. - - -ATA ---- - - No current support for the on-board ATA block. - - -Document Author ---------------- - -Ben Dooks, Copyright 2006 Simtec Electronics |