diff options
36 files changed, 2648 insertions, 1471 deletions
diff --git a/Documentation/devicetree/bindings/regulator/max8997-regulator.txt b/Documentation/devicetree/bindings/regulator/max8997-regulator.txt index 6fe825b8ac1b..b53c5e2b335f 100644 --- a/Documentation/devicetree/bindings/regulator/max8997-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/max8997-regulator.txt @@ -35,6 +35,7 @@ Optional properties: - interrupts: Interrupt specifiers for two interrupt sources. - First interrupt specifier is for 'irq1' interrupt. - Second interrupt specifier is for 'alert' interrupt. +- charger-supply: regulator node for charging current. - max8997,pmic-buck1-uses-gpio-dvs: 'buck1' can be controlled by gpio dvs. - max8997,pmic-buck2-uses-gpio-dvs: 'buck2' can be controlled by gpio dvs. - max8997,pmic-buck5-uses-gpio-dvs: 'buck5' can be controlled by gpio dvs. diff --git a/Documentation/devicetree/bindings/regulator/mcp16502-regulator.txt b/Documentation/devicetree/bindings/regulator/mcp16502-regulator.txt index d86584ed4d93..451cc4e86b01 100644 --- a/Documentation/devicetree/bindings/regulator/mcp16502-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/mcp16502-regulator.txt @@ -4,7 +4,8 @@ Required properties: - compatible: "microchip,mcp16502" - reg: I2C slave address - lpm-gpios: GPIO for LPM pin. Note that this GPIO *must* remain high during - suspend-to-ram, keeping the PMIC into HIBERNATE mode. + suspend-to-ram, keeping the PMIC into HIBERNATE mode; this + property is optional; - regulators: A node that houses a sub-node for each regulator within the device. Each sub-node is identified using the node's name. The content of each sub-node is defined by the diff --git a/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml b/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml new file mode 100644 index 000000000000..61dd5af80db6 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/mt6315-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek MT6315 Regulator + +maintainers: + - Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com> + +description: | + The MT6315 is a power management IC (PMIC) configurable with SPMI. + that contains 4 BUCKs output which can combine with each other + by different efuse settings. + +properties: + compatible: + const: mediatek,mt6315-regulator + + reg: + maxItems: 1 + + regulators: + type: object + description: List of regulators and its properties + + patternProperties: + "^vbuck[1-4]$": + type: object + $ref: "regulator.yaml#" + + properties: + regulator-name: + pattern: "^vbuck[1-4]$" + + additionalProperties: false + +required: + - compatible + - reg + - regulators + +additionalProperties: false + +examples: + - | + pmic@6 { + compatible = "mediatek,mt6315-regulator"; + reg = <0x6 0>; + + regulators { + vbuck1 { + regulator-compatible = "vbuck1"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1193750>; + regulator-enable-ramp-delay = <256>; + regulator-allowed-modes = <0 1 2 4>; + }; + + vbuck3 { + regulator-compatible = "vbuck3"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1193750>; + regulator-enable-ramp-delay = <256>; + regulator-allowed-modes = <0 1 2 4>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml b/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml index c2b0a8b6da1e..f70f2e758a00 100644 --- a/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml @@ -87,6 +87,11 @@ properties: additionalProperties: false + sd-vsel-gpios: + description: GPIO that is used to switch LDO5 between being configured by + LDO5CTRL_L or LDO5CTRL_H register. Use this if the SD_VSEL signal is + connected to a host GPIO. + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/regulator/nxp,pf8x00-regulator.yaml b/Documentation/devicetree/bindings/regulator/nxp,pf8x00-regulator.yaml index 956156fe52a3..8761437ed8ad 100644 --- a/Documentation/devicetree/bindings/regulator/nxp,pf8x00-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/nxp,pf8x00-regulator.yaml @@ -62,8 +62,11 @@ properties: $ref: "/schemas/types.yaml#/definitions/uint32" minimum: 2100 maximum: 4500 + deprecated: true description: BUCK regulators current limit in mA. + This property is deprecated, please use + "regulator-max-microamp" instead. Listed current limits in mA are, 2100 (default) @@ -73,21 +76,11 @@ properties: nxp,phase-shift: $ref: "/schemas/types.yaml#/definitions/uint32" - minimum: 45 - maximum: 0 + default: 0 + enum: [ 0, 45, 90, 135, 180, 225, 270, 315 ] description: BUCK regulators phase shift control in degrees. - Listed phase shift control values in degrees are, - 45 - 90 - 135 - 180 - 225 - 270 - 315 - 0 (default) - unevaluatedProperties: false "^vsnvs$": diff --git a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt index 7d462b899473..ce1e04354006 100644 --- a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt @@ -50,6 +50,8 @@ First Level Nodes - PMIC "qcom,pm8350-rpmh-regulators" "qcom,pm8350c-rpmh-regulators" "qcom,pm8998-rpmh-regulators" + "qcom,pmc8180-rpmh-regulators" + "qcom,pmc8180c-rpmh-regulators" "qcom,pmi8998-rpmh-regulators" "qcom,pm6150-rpmh-regulators" "qcom,pm6150l-rpmh-regulators" diff --git a/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml index 53853ec20fe2..cf784bd1f5e5 100644 --- a/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml @@ -22,11 +22,17 @@ properties: type: object properties: + qcom,soft-start-us: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Regulator soft start time in microseconds. + enum: [200, 400, 600, 800] + default: 200 interrupts: - maxItems: 1 + minItems: 1 + maxItems: 2 description: - Short-circuit interrupt for lab. + Short-circuit and over-current interrupts for lab. required: - interrupts @@ -35,11 +41,17 @@ properties: type: object properties: + qcom,discharge-resistor-kohms: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Discharge resistor value in KiloOhms. + enum: [300, 64, 32, 16] + default: 300 interrupts: - maxItems: 1 + minItems: 1 + maxItems: 2 description: - Short-circuit interrupt for lab. + Short-circuit and over-current interrupts for ibb. required: - interrupts @@ -57,13 +69,15 @@ examples: compatible = "qcom,pmi8998-lab-ibb"; lab { - interrupts = <0x3 0x0 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "sc-err"; + interrupts = <0x3 0xde 0x1 IRQ_TYPE_EDGE_RISING>, + <0x3 0xde 0x0 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "sc-err", "ocp"; }; ibb { - interrupts = <0x3 0x2 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "sc-err"; + interrupts = <0x3 0xdc 0x2 IRQ_TYPE_EDGE_RISING>, + <0x3 0xdc 0x0 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "sc-err", "ocp"; }; }; diff --git a/Documentation/devicetree/bindings/regulator/richtek,rt4831-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rt4831-regulator.yaml new file mode 100644 index 000000000000..d9c23333e157 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/richtek,rt4831-regulator.yaml @@ -0,0 +1,35 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/richtek,rt4831-regulator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Richtek RT4831 Display Bias Voltage Regulator + +maintainers: + - ChiYuan Huang <cy_huang@richtek.com> + +description: | + RT4831 is a multifunctional device that can provide power to the LCD display + and LCD backlight. + + For Display Bias Voltage DSVP and DSVN, the output range is about 4V to 6.5V. + It is sufficient to meet the current LCD power requirement. + + DSVLCM is a boost regulator in IC internal as DSVP and DSVN input power. + Its voltage should be configured above 0.15V to 0.2V gap larger than the + voltage needed for DSVP and DSVN. Too much voltage gap could improve the + voltage drop from the heavy loading scenario. But it also make the power + efficiency worse. It's a trade-off. + + Datasheet is available at + https://www.richtek.com/assets/product_file/RT4831A/DS4831A-05.pdf + +patternProperties: + "^DSV(LCM|P|N)$": + type: object + $ref: regulator.yaml# + description: + Properties for single Display Bias Voltage regulator. + +additionalProperties: false diff --git a/MAINTAINERS b/MAINTAINERS index 667d03852191..67a57864e49a 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -11684,9 +11684,9 @@ F: drivers/video/fbdev/atmel_lcdfb.c F: include/video/atmel_lcdc.h MICROCHIP MCP16502 PMIC DRIVER -M: Andrei Stefanescu <andrei.stefanescu@microchip.com> +M: Claudiu Beznea <claudiu.beznea@microchip.com> L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) -S: Maintained +S: Supported F: Documentation/devicetree/bindings/regulator/mcp16502-regulator.txt F: drivers/regulator/mcp16502.c diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts index ce22d4fa383e..7917754c99d6 100644 --- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts +++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts @@ -122,7 +122,7 @@ &apps_rsc { pm8009-rpmh-regulators { - compatible = "qcom,pm8009-rpmh-regulators"; + compatible = "qcom,pm8009-1-rpmh-regulators"; qcom,pmic-id = "f"; vdd-s1-supply = <&vph_pwr>; @@ -131,6 +131,13 @@ vdd-l5-l6-supply = <&vreg_bob>; vdd-l7-supply = <&vreg_s4a_1p8>; + vreg_s2f_0p95: smps2 { + regulator-name = "vreg_s2f_0p95"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <952000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + }; + vreg_l1f_1p1: ldo1 { regulator-name = "vreg_l1f_1p1"; regulator-min-microvolt = <1104000>; diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c index a3bac9da8cbb..3b2276f04a98 100644 --- a/drivers/mfd/ab8500-core.c +++ b/drivers/mfd/ab8500-core.c @@ -21,7 +21,6 @@ #include <linux/mfd/abx500/ab8500.h> #include <linux/mfd/abx500/ab8500-bm.h> #include <linux/mfd/dbx500-prcmu.h> -#include <linux/regulator/ab8500.h> #include <linux/of.h> #include <linux/of_device.h> diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 5abdd29fb9f3..77c43134bc9e 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -122,15 +122,6 @@ config REGULATOR_AAT2870 If you have a AnalogicTech AAT2870 say Y to enable the regulator driver. -config REGULATOR_AB3100 - tristate "ST-Ericsson AB3100 Regulator functions" - depends on AB3100_CORE - default y if AB3100_CORE - help - These regulators correspond to functionality in the - AB3100 analog baseband dealing with power regulators - for the system. - config REGULATOR_AB8500 bool "ST-Ericsson AB8500 Power Regulators" depends on AB8500_CORE @@ -179,6 +170,14 @@ config REGULATOR_AS3722 AS3722 PMIC. This will enable support for all the software controllable DCDC/LDO regulators. +config REGULATOR_ATC260X + tristate "Actions Semi ATC260x PMIC Regulators" + depends on MFD_ATC260X + help + This driver provides support for the voltage regulators on the + ATC260x PMICs. This will enable support for all the software + controllable DCDC/LDO regulators. + config REGULATOR_AXP20X tristate "X-POWERS AXP20X PMIC Regulators" depends on MFD_AXP20X @@ -732,6 +731,16 @@ config REGULATOR_MT6311 This driver supports the control of different power rails of device through regulator interface. +config REGULATOR_MT6315 + tristate "MediaTek MT6315 PMIC" + depends on SPMI + select REGMAP_SPMI + help + Say y here to select this option to enable the power regulator of + MediaTek MT6315 PMIC. + This driver supports the control of different power rails of device + through regulator interface. + config REGULATOR_MT6323 tristate "MediaTek MT6323 PMIC" depends on MFD_MT6397 @@ -777,6 +786,16 @@ config REGULATOR_MT6397 This driver supports the control of different power rails of device through regulator interface. +config REGULATOR_MTK_DVFSRC + tristate "MediaTek DVFSRC regulator driver" + depends on MTK_DVFSRC + help + Say y here to control regulator by DVFSRC (dynamic voltage + and frequency scaling resource collector). + This driver supports to control regulators via the DVFSRC + of Mediatek. It allows for voting on regulator state + between multiple users. + config REGULATOR_PALMAS tristate "TI Palmas PMIC Regulators" depends on MFD_PALMAS @@ -828,6 +847,10 @@ config REGULATOR_PF8X00 Say y here to support the regulators found on the NXP PF8100/PF8121A/PF8200 PMIC. + Say M here if you want to support for the regulators found + on the NXP PF8100/PF8121A/PF8200 PMIC. The module will be named + "pf8x00-regulator". + config REGULATOR_PFUZE100 tristate "Freescale PFUZE100/200/3000/3001 regulator driver" depends on I2C && OF @@ -969,6 +992,16 @@ config REGULATOR_RT4801 This adds support for voltage regulators in Richtek RT4801 Display Bias IC. The device supports two regulators (DSVP/DSVN). +config REGULATOR_RT4831 + tristate "Richtek RT4831 DSV Regulators" + depends on MFD_RT4831 + help + This adds support for voltage regulators in Richtek RT4831. + There are three regulators (VLCM/DSVP/DSVN). + VLCM is a virtual voltage input for DSVP/DSVN inside IC. + And DSVP/DSVN is the real Vout range from 4V to 6.5V. + It's common used to provide the power for the display panel. + config REGULATOR_RT5033 tristate "Richtek RT5033 Regulators" depends on MFD_RT5033 diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 680e539f6579..44d2f8bf4b74 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -16,7 +16,6 @@ obj-$(CONFIG_REGULATOR_88PM8607) += 88pm8607.o obj-$(CONFIG_REGULATOR_CROS_EC) += cros-ec-regulator.o obj-$(CONFIG_REGULATOR_CPCAP) += cpcap-regulator.o obj-$(CONFIG_REGULATOR_AAT2870) += aat2870-regulator.o -obj-$(CONFIG_REGULATOR_AB3100) += ab3100.o obj-$(CONFIG_REGULATOR_AB8500) += ab8500-ext.o ab8500.o obj-$(CONFIG_REGULATOR_ACT8865) += act8865-regulator.o obj-$(CONFIG_REGULATOR_ACT8945A) += act8945a-regulator.o @@ -27,6 +26,7 @@ obj-$(CONFIG_REGULATOR_ARIZONA_MICSUPP) += arizona-micsupp.o obj-$(CONFIG_REGULATOR_ARM_SCMI) += scmi-regulator.o obj-$(CONFIG_REGULATOR_AS3711) += as3711-regulator.o obj-$(CONFIG_REGULATOR_AS3722) += as3722-regulator.o +obj-$(CONFIG_REGULATOR_ATC260X) += atc260x-regulator.o obj-$(CONFIG_REGULATOR_AXP20X) += axp20x-regulator.o obj-$(CONFIG_REGULATOR_BCM590XX) += bcm590xx-regulator.o obj-$(CONFIG_REGULATOR_BD70528) += bd70528-regulator.o @@ -89,11 +89,13 @@ obj-$(CONFIG_REGULATOR_MP8859) += mp8859.o obj-$(CONFIG_REGULATOR_MP886X) += mp886x.o obj-$(CONFIG_REGULATOR_MPQ7920) += mpq7920.o obj-$(CONFIG_REGULATOR_MT6311) += mt6311-regulator.o +obj-$(CONFIG_REGULATOR_MT6315) += mt6315-regulator.o obj-$(CONFIG_REGULATOR_MT6323) += mt6323-regulator.o obj-$(CONFIG_REGULATOR_MT6358) += mt6358-regulator.o obj-$(CONFIG_REGULATOR_MT6360) += mt6360-regulator.o obj-$(CONFIG_REGULATOR_MT6380) += mt6380-regulator.o obj-$(CONFIG_REGULATOR_MT6397) += mt6397-regulator.o +obj-$(CONFIG_REGULATOR_MTK_DVFSRC) += mtk-dvfsrc-regulator.o obj-$(CONFIG_REGULATOR_QCOM_LABIBB) += qcom-labibb-regulator.o obj-$(CONFIG_REGULATOR_QCOM_RPM) += qcom_rpm-regulator.o obj-$(CONFIG_REGULATOR_QCOM_RPMH) += qcom-rpmh-regulator.o @@ -118,6 +120,7 @@ obj-$(CONFIG_REGULATOR_RK808) += rk808-regulator.o obj-$(CONFIG_REGULATOR_RN5T618) += rn5t618-regulator.o obj-$(CONFIG_REGULATOR_ROHM) += rohm-regulator.o obj-$(CONFIG_REGULATOR_RT4801) += rt4801-regulator.o +obj-$(CONFIG_REGULATOR_RT4831) += rt4831-regulator.o obj-$(CONFIG_REGULATOR_RT5033) += rt5033-regulator.o obj-$(CONFIG_REGULATOR_RTMV20) += rtmv20-regulator.o obj-$(CONFIG_REGULATOR_S2MPA01) += s2mpa01.o diff --git a/drivers/regulator/ab3100.c b/drivers/regulator/ab3100.c deleted file mode 100644 index a544f45efe53..000000000000 --- a/drivers/regulator/ab3100.c +++ /dev/null @@ -1,724 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * drivers/regulator/ab3100.c - * - * Copyright (C) 2008-2009 ST-Ericsson AB - * Low-level control of the AB3100 IC Low Dropout (LDO) - * regulators, external regulator and buck converter - * Author: Mattias Wallin <mattias.wallin@stericsson.com> - * Author: Linus Walleij <linus.walleij@stericsson.com> - */ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/err.h> -#include <linux/platform_device.h> -#include <linux/regulator/driver.h> -#include <linux/mfd/ab3100.h> -#include <linux/mfd/abx500.h> -#include <linux/of.h> -#include <linux/regulator/of_regulator.h> - -/* LDO registers and some handy masking definitions for AB3100 */ -#define AB3100_LDO_A 0x40 -#define AB3100_LDO_C 0x41 -#define AB3100_LDO_D 0x42 -#define AB3100_LDO_E 0x43 -#define AB3100_LDO_E_SLEEP 0x44 -#define AB3100_LDO_F 0x45 -#define AB3100_LDO_G 0x46 -#define AB3100_LDO_H 0x47 -#define AB3100_LDO_H_SLEEP_MODE 0 -#define AB3100_LDO_H_SLEEP_EN 2 -#define AB3100_LDO_ON 4 -#define AB3100_LDO_H_VSEL_AC 5 -#define AB3100_LDO_K 0x48 -#define AB3100_LDO_EXT 0x49 -#define AB3100_BUCK 0x4A -#define AB3100_BUCK_SLEEP 0x4B -#define AB3100_REG_ON_MASK 0x10 - -/** - * struct ab3100_regulator - * A struct passed around the individual regulator functions - * @platform_device: platform device holding this regulator - * @dev: handle to the device - * @plfdata: AB3100 platform data passed in at probe time - * @regreg: regulator register number in the AB3100 - */ -struct ab3100_regulator { - struct device *dev; - struct ab3100_platform_data *plfdata; - u8 regreg; -}; - -/* The order in which registers are initialized */ -static const u8 ab3100_reg_init_order[AB3100_NUM_REGULATORS+2] = { - AB3100_LDO_A, - AB3100_LDO_C, - AB3100_LDO_E, - AB3100_LDO_E_SLEEP, - AB3100_LDO_F, - AB3100_LDO_G, - AB3100_LDO_H, - AB3100_LDO_K, - AB3100_LDO_EXT, - AB3100_BUCK, - AB3100_BUCK_SLEEP, - AB3100_LDO_D, -}; - -/* Preset (hardware defined) voltages for these regulators */ -#define LDO_A_VOLTAGE 2750000 -#define LDO_C_VOLTAGE 2650000 -#define LDO_D_VOLTAGE 2650000 - -static const unsigned int ldo_e_buck_typ_voltages[] = { - 1800000, - 1400000, - 1300000, - 1200000, - 1100000, - 1050000, - 900000, -}; - -static const unsigned int ldo_f_typ_voltages[] = { - 1800000, - 1400000, - 1300000, - 1200000, - 1100000, - 1050000, - 2500000, - 2650000, -}; - -static const unsigned int ldo_g_typ_voltages[] = { - 2850000, - 2750000, - 1800000, - 1500000, -}; - -static const unsigned int ldo_h_typ_voltages[] = { - 2750000, - 1800000, - 1500000, - 1200000, -}; - -static const unsigned int ldo_k_typ_voltages[] = { - 2750000, - 1800000, -}; - - -/* The regulator devices */ -static struct ab3100_regulator -ab3100_regulators[AB3100_NUM_REGULATORS] = { - { - .regreg = AB3100_LDO_A, - }, - { - .regreg = AB3100_LDO_C, - }, - { - .regreg = AB3100_LDO_D, - }, - { - .regreg = AB3100_LDO_E, - }, - { - .regreg = AB3100_LDO_F, - }, - { - .regreg = AB3100_LDO_G, - }, - { - .regreg = AB3100_LDO_H, - }, - { - .regreg = AB3100_LDO_K, - }, - { - .regreg = AB3100_LDO_EXT, - /* No voltages for the external regulator */ - }, - { - .regreg = AB3100_BUCK, - }, -}; - -/* - * General functions for enable, disable and is_enabled used for - * LDO: A,C,E,F,G,H,K,EXT and BUCK - */ -static int ab3100_enable_regulator(struct regulator_dev *reg) -{ - struct ab3100_regulator *abreg = rdev_get_drvdata(reg); - int err; - u8 regval; - - err = abx500_get_register_interruptible(abreg->dev, 0, abreg->regreg, - ®val); - if (err) { - dev_warn(®->dev, "failed to get regid %d value\n", - abreg->regreg); - return err; - } - - /* The regulator is already on, no reason to go further */ - if (regval & AB3100_REG_ON_MASK) - return 0; - - regval |= AB3100_REG_ON_MASK; - - err = abx500_set_register_interruptible(abreg->dev, 0, abreg->regreg, - regval); - if (err) { - dev_warn(®->dev, "failed to set regid %d value\n", - abreg->regreg); - return err; - } - - return 0; -} - -static int ab3100_disable_regulator(struct regulator_dev *reg) -{ - struct ab3100_regulator *abreg = rdev_get_drvdata(reg); - int err; - u8 regval; - - /* - * LDO D is a special regulator. When it is disabled, the entire - * system is shut down. So this is handled specially. - */ - pr_info("Called ab3100_disable_regulator\n"); - if (abreg->regreg == AB3100_LDO_D) { - dev_info(®->dev, "disabling LDO D - shut down system\n"); - /* Setting LDO D to 0x00 cuts the power to the SoC */ - return abx500_set_register_interruptible(abreg->dev, 0, - AB3100_LDO_D, 0x00U); - } - - /* - * All other regulators are handled here - */ - err = abx500_get_register_interruptible(abreg->dev, 0, abreg->regreg, - ®val); - if (err) { - dev_err(®->dev, "unable to get register 0x%x\n", - abreg->regreg); - return err; - } - regval &= ~AB3100_REG_ON_MASK; - return abx500_set_register_interruptible(abreg->dev, 0, abreg->regreg, - regval); -} - -static int ab3100_is_enabled_regulator(struct regulator_dev *reg) -{ - struct ab3100_regulator *abreg = rdev_get_drvdata(reg); - u8 regval; - int err; - - err = abx500_get_register_interruptible(abreg->dev, 0, abreg->regreg, - ®val); - if (err) { - dev_err(®->dev, "unable to get register 0x%x\n", - abreg->regreg); - return err; - } - - return regval & AB3100_REG_ON_MASK; -} - -static int ab3100_get_voltage_regulator(struct regulator_dev *reg) -{ - struct ab3100_regulator *abreg = rdev_get_drvdata(reg); - u8 regval; - int err; - - /* - * For variable types, read out setting and index into - * supplied voltage list. - */ - err = abx500_get_register_interruptible(abreg->dev, 0, - abreg->regreg, ®val); - if (err) { - dev_warn(®->dev, - "failed to get regulator value in register %02x\n", - abreg->regreg); - return err; - } - - /* The 3 highest bits index voltages */ - regval &= 0xE0; - regval >>= 5; - - if (regval >= reg->desc->n_voltages) { - dev_err(®->dev, - "regulator register %02x contains an illegal voltage setting\n", - abreg->regreg); - return -EINVAL; - } - - return reg->desc->volt_table[regval]; -} - -static int ab3100_set_voltage_regulator_sel(struct regulator_dev *reg, - unsigned selector) -{ - struct ab3100_regulator *abreg = rdev_get_drvdata(reg); - u8 regval; - int err; - - err = abx500_get_register_interruptible(abreg->dev, 0, - abreg->regreg, ®val); - if (err) { - dev_warn(®->dev, - "failed to get regulator register %02x\n", - abreg->regreg); - return err; - } - - /* The highest three bits control the variable regulators */ - regval &= ~0xE0; - regval |= (selector << 5); - - err = abx500_set_register_interruptible(abreg->dev, 0, - abreg->regreg, regval); - if (err) - dev_warn(®->dev, "failed to set regulator register %02x\n", - abreg->regreg); - - return err; -} - -static int ab3100_set_suspend_voltage_regulator(struct regulator_dev *reg, - int uV) -{ - struct ab3100_regulator *abreg = rdev_get_drvdata(reg); - u8 regval; - int err; - int bestindex; - u8 targetreg; - - if (abreg->regreg == AB3100_LDO_E) - targetreg = AB3100_LDO_E_SLEEP; - else if (abreg->regreg == AB3100_BUCK) - targetreg = AB3100_BUCK_SLEEP; - else - return -EINVAL; - - /* LDO E and BUCK have special suspend voltages you can set */ - bestindex = regulator_map_voltage_iterate(reg, uV, uV); - - err = abx500_get_register_interruptible(abreg->dev, 0, - targetreg, ®val); - if (err) { - dev_warn(®->dev, - "failed to get regulator register %02x\n", - targetreg); - return err; - } - - /* The highest three bits control the variable regulators */ - regval &= ~0xE0; - regval |= (bestindex << 5); - - err = abx500_set_register_interruptible(abreg->dev, 0, - targetreg, regval); - if (err) - dev_warn(®->dev, "failed to set regulator register %02x\n", - abreg->regreg); - - return err; -} - -/* - * The external regulator can just define a fixed voltage. - */ -static int ab3100_get_voltage_regulator_external(struct regulator_dev *reg) -{ - struct ab3100_regulator *abreg = rdev_get_drvdata(reg); - - if (abreg->plfdata) - return abreg->plfdata->external_voltage; - else - /* TODO: encode external voltage into device tree */ - return 0; -} - -static const struct regulator_ops regulator_ops_fixed = { - .enable = ab3100_enable_regulator, - .disable = ab3100_disable_regulator, - .is_enabled = ab3100_is_enabled_regulator, -}; - -static const struct regulator_ops regulator_ops_variable = { - .enable = ab3100_enable_regulator, - .disable = ab3100_disable_regulator, - .is_enabled = ab3100_is_enabled_regulator, - .get_voltage = ab3100_get_voltage_regulator, - .set_voltage_sel = ab3100_set_voltage_regulator_sel, - .list_voltage = regulator_list_voltage_table, -}; - -static const struct regulator_ops regulator_ops_variable_sleepable = { - .enable = ab3100_enable_regulator, - .disable = ab3100_disable_regulator, - .is_enabled = ab3100_is_enabled_regulator, - .get_voltage = ab3100_get_voltage_regulator, - .set_voltage_sel = ab3100_set_voltage_regulator_sel, - .set_suspend_voltage = ab3100_set_suspend_voltage_regulator, - .list_voltage = regulator_list_voltage_table, -}; - -/* - * LDO EXT is an external regulator so it is really - * not possible to set any voltage locally here, AB3100 - * is an on/off switch plain an simple. The external - * voltage is defined in the board set-up if any. - */ -static const struct regulator_ops regulator_ops_external = { - .enable = ab3100_enable_regulator, - .disable = ab3100_disable_regulator, - .is_enabled = ab3100_is_enabled_regulator, - .get_voltage = ab3100_get_voltage_regulator_external, -}; - -static const struct regulator_desc -ab3100_regulator_desc[AB3100_NUM_REGULATORS] = { - { - .name = "LDO_A", - .id = AB3100_LDO_A, - .ops = ®ulator_ops_fixed, - .n_voltages = 1, - .type = REGULATOR_VOLTAGE, - .owner = THIS_MODULE, - .fixed_uV = LDO_A_VOLTAGE, - .enable_time = 200, - }, - { - .name = "LDO_C", - .id = AB3100_LDO_C, - .ops = ®ulator_ops_fixed, - .n_voltages = 1, - .type = REGULATOR_VOLTAGE, - .owner = THIS_MODULE, - .fixed_uV = LDO_C_VOLTAGE, - .enable_time = 200, - }, - { - .name = "LDO_D", - .id = AB3100_LDO_D, - .ops = ®ulator_ops_fixed, - .n_voltages = 1, - .type = REGULATOR_VOLTAGE, - .owner = THIS_MODULE, - .fixed_uV = LDO_D_VOLTAGE, - .enable_time = 200, - }, - { - .name = "LDO_E", - .id = AB3100_LDO_E, - .ops = ®ulator_ops_variable_sleepable, - .n_voltages = ARRAY_SIZE(ldo_e_buck_typ_voltages), - .volt_table = ldo_e_buck_typ_voltages, - .type = REGULATOR_VOLTAGE, - .owner = THIS_MODULE, - .enable_time = 200, - }, - { - .name = "LDO_F", - .id = AB3100_LDO_F, - .ops = ®ulator_ops_variable, - .n_voltages = ARRAY_SIZE(ldo_f_typ_voltages), - .volt_table = ldo_f_typ_voltages, - .type = REGULATOR_VOLTAGE, - .owner = THIS_MODULE, - .enable_time = 600, - }, - { - .name = "LDO_G", - .id = AB3100_LDO_G, - .ops = ®ulator_ops_variable, - .n_voltages = ARRAY_SIZE(ldo_g_typ_voltages), - .volt_table = ldo_g_typ_voltages, - .type = REGULATOR_VOLTAGE, - .owner = THIS_MODULE, - .enable_time = 400, - }, - { - .name = "LDO_H", - .id = AB3100_LDO_H, - .ops = ®ulator_ops_variable, - .n_voltages = ARRAY_SIZE(ldo_h_typ_voltages), - .volt_table = ldo_h_typ_voltages, - .type = REGULATOR_VOLTAGE, - .owner = THIS_MODULE, - .enable_time = 200, - }, - { - .name = "LDO_K", - .id = AB3100_LDO_K, - .ops = ®ulator_ops_variable, - .n_voltages = ARRAY_SIZE(ldo_k_typ_voltages), - .volt_table = ldo_k_typ_voltages, - .type = REGULATOR_VOLTAGE, - .owner = THIS_MODULE, - .enable_time = 200, - }, - { - .name = "LDO_EXT", - .id = AB3100_LDO_EXT, - .ops = ®ulator_ops_external, - .type = REGULATOR_VOLTAGE, - .owner = THIS_MODULE, - }, - { - .name = "BUCK", - .id = AB3100_BUCK, - .ops = ®ulator_ops_variable_sleepable, - .n_voltages = ARRAY_SIZE(ldo_e_buck_typ_voltages), - .volt_table = ldo_e_buck_typ_voltages, - .type = REGULATOR_VOLTAGE, - .owner = THIS_MODULE, - .enable_time = 1000, - }, -}; - -static int ab3100_regulator_register(struct platform_device *pdev, - struct ab3100_platform_data *plfdata, - struct regulator_init_data *init_data, - struct device_node *np, - unsigned long id) -{ - const struct regulator_desc *desc; - struct ab3100_regulator *reg; - struct regulator_dev *rdev; - struct regulator_config config = { }; - int err, i; - - for (i = 0; i < AB3100_NUM_REGULATORS; i++) { - desc = &ab3100_regulator_desc[i]; - if (desc->id == id) - break; - } - if (desc->id != id) - return -ENODEV; - - /* Same index used for this array */ - reg = &ab3100_regulators[i]; - - /* - * Initialize per-regulator struct. - * Inherit platform data, this comes down from the - * i2c boarddata, from the machine. So if you want to - * see what it looks like for a certain machine, go - * into the machine I2C setup. - */ - reg->dev = &pdev->dev; - if (plfdata) { - reg->plfdata = plfdata; - config.init_data = &plfdata->reg_constraints[i]; - } else if (np) { - config.of_node = np; - config.init_data = init_data; - } - config.dev = &pdev->dev; - config.driver_data = reg; - - rdev = devm_regulator_register(&pdev->dev, desc, &config); - if (IS_ERR(rdev)) { - err = PTR_ERR(rdev); - dev_err(&pdev->dev, - "%s: failed to register regulator %s err %d\n", - __func__, desc->name, - err); - return err; - } - - return 0; -} - -static struct of_regulator_match ab3100_regulator_matches[] = { - { .name = "ab3100_ldo_a", .driver_data = (void *) AB3100_LDO_A, }, - { .name = "ab3100_ldo_c", .driver_data = (void *) AB3100_LDO_C, }, - { .name = "ab3100_ldo_d", .driver_data = (void *) AB3100_LDO_D, }, - { .name = "ab3100_ldo_e", .driver_data = (void *) AB3100_LDO_E, }, - { .name = "ab3100_ldo_f", .driver_data = (void *) AB3100_LDO_F }, - { .name = "ab3100_ldo_g", .driver_data = (void *) AB3100_LDO_G }, - { .name = "ab3100_ldo_h", .driver_data = (void *) AB3100_LDO_H }, - { .name = "ab3100_ldo_k", .driver_data = (void *) AB3100_LDO_K }, - { .name = "ab3100_ext", .driver_data = (void *) AB3100_LDO_EXT }, - { .name = "ab3100_buck", .driver_data = (void *) AB3100_BUCK }, -}; - -/* - * Initial settings of ab3100 registers. - * Common for below LDO regulator settings are that - * bit 7-5 controls voltage. Bit 4 turns regulator ON(1) or OFF(0). - * Bit 3-2 controls sleep enable and bit 1-0 controls sleep mode. - */ -/* LDO_A 0x16: 2.75V, ON, SLEEP_A, SLEEP OFF GND */ -#define LDO_A_SETTING 0x16 -/* LDO_C 0x10: 2.65V, ON, SLEEP_A or B, SLEEP full power */ -#define LDO_C_SETTING 0x10 -/* LDO_D 0x10: 2.65V, ON, sleep mode not used */ -#define LDO_D_SETTING 0x10 -/* LDO_E 0x10: 1.8V, ON, SLEEP_A or B, SLEEP full power */ -#define LDO_E_SETTING 0x10 -/* LDO_E SLEEP 0x00: 1.8V, not used, SLEEP_A or B, not used */ -#define LDO_E_SLEEP_SETTING 0x00 -/* LDO_F 0xD0: 2.5V, ON, SLEEP_A or B, SLEEP full power */ -#define LDO_F_SETTING 0xD0 -/* LDO_G 0x00: 2.85V, OFF, SLEEP_A or B, SLEEP full power */ -#define LDO_G_SETTING 0x00 -/* LDO_H 0x18: 2.75V, ON, SLEEP_B, SLEEP full power */ -#define LDO_H_SETTING 0x18 -/* LDO_K 0x00: 2.75V, OFF, SLEEP_A or B, SLEEP full power */ -#define LDO_K_SETTING 0x00 -/* LDO_EXT 0x00: Voltage not set, OFF, not used, not used */ -#define LDO_EXT_SETTING 0x00 -/* BUCK 0x7D: 1.2V, ON, SLEEP_A and B, SLEEP low power */ -#define BUCK_SETTING 0x7D -/* BUCK SLEEP 0xAC: 1.05V, Not used, SLEEP_A and B, Not used */ -#define BUCK_SLEEP_SETTING 0xAC - -static const u8 ab3100_reg_initvals[] = { - LDO_A_SETTING, - LDO_C_SETTING, - LDO_E_SETTING, - LDO_E_SLEEP_SETTING, - LDO_F_SETTING, - LDO_G_SETTING, - LDO_H_SETTING, - LDO_K_SETTING, - LDO_EXT_SETTING, - BUCK_SETTING, - BUCK_SLEEP_SETTING, - LDO_D_SETTING, -}; - -static int -ab3100_regulator_of_probe(struct platform_device *pdev, struct device_node *np) -{ - int err, i; - - /* - * Set up the regulator registers, as was previously done with - * platform data. - */ - /* Set up regulators */ - for (i = 0; i < ARRAY_SIZE(ab3100_reg_init_order); i++) { - err = abx500_set_register_interruptible(&pdev->dev, 0, - ab3100_reg_init_order[i], - ab3100_reg_initvals[i]); - if (err) { - dev_err(&pdev->dev, "regulator initialization failed with error %d\n", - err); - return err; - } - } - - for (i = 0; i < ARRAY_SIZE(ab3100_regulator_matches); i++) { - err = ab3100_regulator_register( - pdev, NULL, ab3100_regulator_matches[i].init_data, - ab3100_regulator_matches[i].of_node, - (unsigned long)ab3100_regulator_matches[i].driver_data); - if (err) - return err; - } - - return 0; -} - - -static int ab3100_regulators_probe(struct platform_device *pdev) -{ - struct ab3100_platform_data *plfdata = dev_get_platdata(&pdev->dev); - struct device_node *np = pdev->dev.of_node; - int err = 0; - u8 data; - int i; - - /* Check chip state */ - err = abx500_get_register_interruptible(&pdev->dev, 0, - AB3100_LDO_D, &data); - if (err) { - dev_err(&pdev->dev, "could not read initial status of LDO_D\n"); - return err; - } - if (data & 0x10) - dev_notice(&pdev->dev, - "chip is already in active mode (Warm start)\n"); - else - dev_notice(&pdev->dev, - "chip is in inactive mode (Cold start)\n"); - - if (np) { - err = of_regulator_match(&pdev->dev, np, - ab3100_regulator_matches, - ARRAY_SIZE(ab3100_regulator_matches)); - if (err < 0) { - dev_err(&pdev->dev, - "Error parsing regulator init data: %d\n", err); - return err; - } - return ab3100_regulator_of_probe(pdev, np); - } - - /* Set up regulators */ - for (i = 0; i < ARRAY_SIZE(ab3100_reg_init_order); i++) { - err = abx500_set_register_interruptible(&pdev->dev, 0, - ab3100_reg_init_order[i], - plfdata->reg_initvals[i]); - if (err) { - dev_err(&pdev->dev, "regulator initialization failed with error %d\n", - err); - return err; - } - } - - /* Register the regulators */ - for (i = 0; i < AB3100_NUM_REGULATORS; i++) { - const struct regulator_desc *desc = &ab3100_regulator_desc[i]; - - err = ab3100_regulator_register(pdev, plfdata, NULL, NULL, - desc->id); - if (err) - return err; - } - - return 0; -} - -static struct platform_driver ab3100_regulators_driver = { - .driver = { - .name = "ab3100-regulators", - }, - .probe = ab3100_regulators_probe, -}; - -static __init int ab3100_regulators_init(void) -{ - return platform_driver_register(&ab3100_regulators_driver); -} - -static __exit void ab3100_regulators_exit(void) -{ - platform_driver_unregister(&ab3100_regulators_driver); -} - -subsys_initcall(ab3100_regulators_init); -module_exit(ab3100_regulators_exit); - -MODULE_AUTHOR("Mattias Wallin <mattias.wallin@stericsson.com>"); -MODULE_DESCRIPTION("AB3100 Regulator driver"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:ab3100-regulators"); diff --git a/drivers/regulator/ab8500-ext.c b/drivers/regulator/ab8500-ext.c index 8bb43a671ded..4f26952caa56 100644 --- a/drivers/regulator/ab8500-ext.c +++ b/drivers/regulator/ab8500-ext.c @@ -22,403 +22,17 @@ #include <linux/regulator/of_regulator.h> #include <linux/mfd/abx500.h> #include <linux/mfd/abx500/ab8500.h> -#include <linux/regulator/ab8500.h> - -static struct regulator_consumer_supply ab8500_vaux1_consumers[] = { - /* Main display, u8500 R3 uib */ - REGULATOR_SUPPLY("vddi", "mcde_disp_sony_acx424akp.0"), - /* Main display, u8500 uib and ST uib */ - REGULATOR_SUPPLY("vdd1", "samsung_s6d16d0.0"), - /* Secondary display, ST uib */ - REGULATOR_SUPPLY("vdd1", "samsung_s6d16d0.1"), - /* SFH7741 proximity sensor */ - REGULATOR_SUPPLY("vcc", "gpio-keys.0"), - /* BH1780GLS ambient light sensor */ - REGULATOR_SUPPLY("vcc", "2-0029"), - /* lsm303dlh accelerometer */ - REGULATOR_SUPPLY("vdd", "2-0018"), - /* lsm303dlhc accelerometer */ - REGULATOR_SUPPLY("vdd", "2-0019"), - /* lsm303dlh magnetometer */ - REGULATOR_SUPPLY("vdd", "2-001e"), - /* Rohm BU21013 Touchscreen devices */ - REGULATOR_SUPPLY("avdd", "3-005c"), - REGULATOR_SUPPLY("avdd", "3-005d"), - /* Synaptics RMI4 Touchscreen device */ - REGULATOR_SUPPLY("vdd", "3-004b"), - /* L3G4200D Gyroscope device */ - REGULATOR_SUPPLY("vdd", "2-0068"), - /* Ambient light sensor device */ - REGULATOR_SUPPLY("vdd", "3-0029"), - /* Pressure sensor device */ - REGULATOR_SUPPLY("vdd", "2-005c"), - /* Cypress TrueTouch Touchscreen device */ - REGULATOR_SUPPLY("vcpin", "spi8.0"), - /* Camera device */ - REGULATOR_SUPPLY("vaux12v5", "mmio_camera"), -}; - -static struct regulator_consumer_supply ab8500_vaux2_consumers[] = { - /* On-board eMMC power */ - REGULATOR_SUPPLY("vmmc", "sdi4"), - /* AB8500 audio codec */ - REGULATOR_SUPPLY("vcc-N2158", "ab8500-codec.0"), - /* AB8500 accessory detect 1 */ - REGULATOR_SUPPLY("vcc-N2158", "ab8500-acc-det.0"), - /* AB8500 Tv-out device */ - REGULATOR_SUPPLY("vcc-N2158", "mcde_tv_ab8500.4"), - /* AV8100 HDMI device */ - REGULATOR_SUPPLY("vcc-N2158", "av8100_hdmi.3"), -}; - -static struct regulator_consumer_supply ab8500_vaux3_consumers[] = { - REGULATOR_SUPPLY("v-SD-STM", "stm"), - /* External MMC slot power */ - REGULATOR_SUPPLY("vmmc", "sdi0"), -}; - -static struct regulator_consumer_supply ab8500_vtvout_consumers[] = { - /* TV-out DENC supply */ - REGULATOR_SUPPLY("vtvout", "ab8500-denc.0"), - /* Internal general-purpose ADC */ - REGULATOR_SUPPLY("vddadc", "ab8500-gpadc.0"), - /* ADC for charger */ - REGULATOR_SUPPLY("vddadc", "ab8500-charger.0"), - /* AB8500 Tv-out device */ - REGULATOR_SUPPLY("vtvout", "mcde_tv_ab8500.4"), -}; - -static struct regulator_consumer_supply ab8500_vaud_consumers[] = { - /* AB8500 audio-codec main supply */ - REGULATOR_SUPPLY("vaud", "ab8500-codec.0"), -}; - -static struct regulator_consumer_supply ab8500_vamic1_consumers[] = { - /* AB8500 audio-codec Mic1 supply */ - REGULATOR_SUPPLY("vamic1", "ab8500-codec.0"), -}; - -static struct regulator_consumer_supply ab8500_vamic2_consumers[] = { - /* AB8500 audio-codec Mic2 supply */ - REGULATOR_SUPPLY("vamic2", "ab8500-codec.0"), -}; - -static struct regulator_consumer_supply ab8500_vdmic_consumers[] = { - /* AB8500 audio-codec DMic supply */ - REGULATOR_SUPPLY("vdmic", "ab8500-codec.0"), -}; -static struct regulator_consumer_supply ab8500_vintcore_consumers[] = { - /* SoC core supply, no device */ - REGULATOR_SUPPLY("v-intcore", NULL), - /* USB Transceiver */ - REGULATOR_SUPPLY("vddulpivio18", "ab8500-usb.0"), - /* Handled by abx500 clk driver */ - REGULATOR_SUPPLY("v-intcore", "abx500-clk.0"), -}; - -static struct regulator_consumer_supply ab8500_vana_consumers[] = { - /* DB8500 DSI */ - REGULATOR_SUPPLY("vdddsi1v2", "mcde"), - REGULATOR_SUPPLY("vdddsi1v2", "b2r2_core"), - REGULATOR_SUPPLY("vdddsi1v2", "b2r2_1_core"), - REGULATOR_SUPPLY("vdddsi1v2", "dsilink.0"), - REGULATOR_SUPPLY("vdddsi1v2", "dsilink.1"), - REGULATOR_SUPPLY("vdddsi1v2", "dsilink.2"), - /* DB8500 CSI */ - REGULATOR_SUPPLY("vddcsi1v2", "mmio_camera"), -}; - -/* ab8500 regulator register initialization */ -static struct ab8500_regulator_reg_init ab8500_reg_init[] = { - /* - * VanaRequestCtrl = HP/LP depending on VxRequest - * VextSupply1RequestCtrl = HP/LP depending on VxRequest - */ - INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL2, 0xf0, 0x00), - /* - * VextSupply2RequestCtrl = HP/LP depending on VxRequest - * VextSupply3RequestCtrl = HP/LP depending on VxRequest - * Vaux1RequestCtrl = HP/LP depending on VxRequest - * Vaux2RequestCtrl = HP/LP depending on VxRequest - */ - INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL3, 0xff, 0x00), - /* - * Vaux3RequestCtrl = HP/LP depending on VxRequest - * SwHPReq = Control through SWValid disabled - */ - INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL4, 0x07, 0x00), - /* - * VanaSysClkReq1HPValid = disabled - * Vaux1SysClkReq1HPValid = disabled - * Vaux2SysClkReq1HPValid = disabled - * Vaux3SysClkReq1HPValid = disabled - */ - INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQ1HPVALID1, 0xe8, 0x00), - /* - * VextSupply1SysClkReq1HPValid = disabled - * VextSupply2SysClkReq1HPValid = disabled - * VextSupply3SysClkReq1HPValid = SysClkReq1 controlled - */ - INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQ1HPVALID2, 0x70, 0x40), - /* - * VanaHwHPReq1Valid = disabled - * Vaux1HwHPreq1Valid = disabled - * Vaux2HwHPReq1Valid = disabled - * Vaux3HwHPReqValid = disabled - */ - INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ1VALID1, 0xe8, 0x00), - /* - * VextSupply1HwHPReq1Valid = disabled - * VextSupply2HwHPReq1Valid = disabled - * VextSupply3HwHPReq1Valid = disabled - */ - INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ1VALID2, 0x07, 0x00), - /* - * VanaHwHPReq2Valid = disabled - * Vaux1HwHPReq2Valid = disabled - * Vaux2HwHPReq2Valid = disabled - * Vaux3HwHPReq2Valid = disabled - */ - INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ2VALID1, 0xe8, 0x00), - /* - * VextSupply1HwHPReq2Valid = disabled - * VextSupply2HwHPReq2Valid = disabled - * VextSupply3HwHPReq2Valid = HWReq2 controlled - */ - INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ2VALID2, 0x07, 0x04), - /* - * VanaSwHPReqValid = disabled - * Vaux1SwHPReqValid = disabled - */ - INIT_REGULATOR_REGISTER(AB8500_REGUSWHPREQVALID1, 0xa0, 0x00), - /* - * Vaux2SwHPReqValid = disabled - * Vaux3SwHPReqValid = disabled - * VextSupply1SwHPReqValid = disabled - * VextSupply2SwHPReqValid = disabled - * VextSupply3SwHPReqValid = disabled - */ - INIT_REGULATOR_REGISTER(AB8500_REGUSWHPREQVALID2, 0x1f, 0x00), - /* - * SysClkReq2Valid1 = SysClkReq2 controlled - * SysClkReq3Valid1 = disabled - * SysClkReq4Valid1 = SysClkReq4 controlled - * SysClkReq5Valid1 = disabled - * SysClkReq6Valid1 = SysClkReq6 controlled - * SysClkReq7Valid1 = disabled - * SysClkReq8Valid1 = disabled - */ - INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQVALID1, 0xfe, 0x2a), - /* - * SysClkReq2Valid2 = disabled - * SysClkReq3Valid2 = disabled - * SysClkReq4Valid2 = disabled - * SysClkReq5Valid2 = disabled - * SysClkReq6Valid2 = SysClkReq6 controlled - * SysClkReq7Valid2 = disabled - * SysClkReq8Valid2 = disabled - */ - INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQVALID2, 0xfe, 0x20), - /* - * VTVoutEna = disabled - * Vintcore12Ena = disabled - * Vintcore12Sel = 1.25 V - * Vintcore12LP = inactive (HP) - * VTVoutLP = inactive (HP) - */ - INIT_REGULATOR_REGISTER(AB8500_REGUMISC1, 0xfe, 0x10), - /* - * VaudioEna = disabled - * VdmicEna = disabled - * Vamic1Ena = disabled - * Vamic2Ena = disabled - */ - INIT_REGULATOR_REGISTER(AB8500_VAUDIOSUPPLY, 0x1e, 0x00), - /* - * Vamic1_dzout = high-Z when Vamic1 is disabled - * Vamic2_dzout = high-Z when Vamic2 is disabled - */ - INIT_REGULATOR_REGISTER(AB8500_REGUCTRL1VAMIC, 0x03, 0x00), - /* - * VPll = Hw controlled (NOTE! PRCMU bits) - * VanaRegu = force off - */ - INIT_REGULATOR_REGISTER(AB8500_VPLLVANAREGU, 0x0f, 0x02), - /* - * VrefDDREna = disabled - * VrefDDRSleepMode = inactive (no pulldown) - */ - INIT_REGULATOR_REGISTER(AB8500_VREFDDR, 0x03, 0x00), - /* - * VextSupply1Regu = force LP - * VextSupply2Regu = force OFF - * VextSupply3Regu = force HP (-> STBB2=LP and TPS=LP) - * ExtSupply2Bypass = ExtSupply12LPn ball is 0 when Ena is 0 - * ExtSupply3Bypass = ExtSupply3LPn ball is 0 when Ena is 0 - */ - INIT_REGULATOR_REGISTER(AB8500_EXTSUPPLYREGU, 0xff, 0x13), - /* - * Vaux1Regu = force HP - * Vaux2Regu = force off - */ - INIT_REGULATOR_REGISTER(AB8500_VAUX12REGU, 0x0f, 0x01), - /* - * Vaux3Regu = force off - */ - INIT_REGULATOR_REGISTER(AB8500_VRF1VAUX3REGU, 0x03, 0x00), - /* - * Vaux1Sel = 2.8 V - */ - INIT_REGULATOR_REGISTER(AB8500_VAUX1SEL, 0x0f, 0x0C), - /* - * Vaux2Sel = 2.9 V - */ - INIT_REGULATOR_REGISTER(AB8500_VAUX2SEL, 0x0f, 0x0d), - /* - * Vaux3Sel = 2.91 V - */ - INIT_REGULATOR_REGISTER(AB8500_VRF1VAUX3SEL, 0x07, 0x07), - /* - * VextSupply12LP = disabled (no LP) - */ - INIT_REGULATOR_REGISTER(AB8500_REGUCTRL2SPARE, 0x01, 0x00), - /* - * Vaux1Disch = short discharge time - * Vaux2Disch = short discharge time - * Vaux3Disch = short discharge time - * Vintcore12Disch = short discharge time - * VTVoutDisch = short discharge time - * VaudioDisch = short discharge time - */ - INIT_REGULATOR_REGISTER(AB8500_REGUCTRLDISCH, 0xfc, 0x00), - /* - * VanaDisch = short discharge time - * VdmicPullDownEna = pulldown disabled when Vdmic is disabled - * VdmicDisch = short discharge time - */ - INIT_REGULATOR_REGISTER(AB8500_REGUCTRLDISCH2, 0x16, 0x00), +/* AB8500 external regulators */ +enum ab8500_ext_regulator_id { + AB8500_EXT_SUPPLY1, + AB8500_EXT_SUPPLY2, + AB8500_EXT_SUPPLY3, + AB8500_NUM_EXT_REGULATORS, }; -/* AB8500 regulators */ -static struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = { - /* supplies to the display/camera */ - [AB8500_LDO_AUX1] = { - .supply_regulator = "ab8500-ext-supply3", - .constraints = { - .name = "V-DISPLAY", - .min_uV = 2800000, - .max_uV = 3300000, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS, - .boot_on = 1, /* display is on at boot */ - }, - .num_consumer_supplies = ARRAY_SIZE(ab8500_vaux1_consumers), - .consumer_supplies = ab8500_vaux1_consumers, - }, - /* supplies to the on-board eMMC */ - [AB8500_LDO_AUX2] = { - .supply_regulator = "ab8500-ext-supply3", - .constraints = { - .name = "V-eMMC1", - .min_uV = 1100000, - .max_uV = 3300000, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS | - REGULATOR_CHANGE_MODE, - .valid_modes_mask = REGULATOR_MODE_NORMAL | - REGULATOR_MODE_IDLE, - }, - .num_consumer_supplies = ARRAY_SIZE(ab8500_vaux2_consumers), - .consumer_supplies = ab8500_vaux2_consumers, - }, - /* supply for VAUX3, supplies to SDcard slots */ - [AB8500_LDO_AUX3] = { - .supply_regulator = "ab8500-ext-supply3", - .constraints = { - .name = "V-MMC-SD", - .min_uV = 1100000, - .max_uV = 3300000, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS | - REGULATOR_CHANGE_MODE, - .valid_modes_mask = REGULATOR_MODE_NORMAL | - REGULATOR_MODE_IDLE, - }, - .num_consumer_supplies = ARRAY_SIZE(ab8500_vaux3_consumers), - .consumer_supplies = ab8500_vaux3_consumers, - }, - /* supply for tvout, gpadc, TVOUT LDO */ - [AB8500_LDO_TVOUT] = { - .constraints = { - .name = "V-TVOUT", - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(ab8500_vtvout_consumers), - .consumer_supplies = ab8500_vtvout_consumers, - }, - /* supply for ab8500-vaudio, VAUDIO LDO */ - [AB8500_LDO_AUDIO] = { - .constraints = { - .name = "V-AUD", - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(ab8500_vaud_consumers), - .consumer_supplies = ab8500_vaud_consumers, - }, - /* supply for v-anamic1 VAMic1-LDO */ - [AB8500_LDO_ANAMIC1] = { - .constraints = { - .name = "V-AMIC1", - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(ab8500_vamic1_consumers), - .consumer_supplies = ab8500_vamic1_consumers, - }, - /* supply for v-amic2, VAMIC2 LDO, reuse constants for AMIC1 */ - [AB8500_LDO_ANAMIC2] = { - .constraints = { - .name = "V-AMIC2", - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(ab8500_vamic2_consumers), - .consumer_supplies = ab8500_vamic2_consumers, - }, - /* supply for v-dmic, VDMIC LDO */ - [AB8500_LDO_DMIC] = { - .constraints = { - .name = "V-DMIC", - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(ab8500_vdmic_consumers), - .consumer_supplies = ab8500_vdmic_consumers, - }, - /* supply for v-intcore12, VINTCORE12 LDO */ - [AB8500_LDO_INTCORE] = { - .constraints = { - .name = "V-INTCORE", - .min_uV = 1250000, - .max_uV = 1350000, - .input_uV = 1800000, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS | - REGULATOR_CHANGE_MODE | - REGULATOR_CHANGE_DRMS, - .valid_modes_mask = REGULATOR_MODE_NORMAL | - REGULATOR_MODE_IDLE, - }, - .num_consumer_supplies = ARRAY_SIZE(ab8500_vintcore_consumers), - .consumer_supplies = ab8500_vintcore_consumers, - }, - /* supply for U8500 CSI-DSI, VANA LDO */ - [AB8500_LDO_ANA] = { - .constraints = { - .name = "V-CSI-DSI", - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(ab8500_vana_consumers), - .consumer_supplies = ab8500_vana_consumers, - }, +struct ab8500_ext_regulator_cfg { + bool hwreq; /* requires hw mode or high power mode */ }; /* supply for VextSupply3 */ @@ -465,15 +79,6 @@ static struct regulator_init_data ab8500_ext_regulators[] = { }, }; -static struct ab8500_regulator_platform_data ab8500_regulator_plat_data = { - .reg_init = ab8500_reg_init, - .num_reg_init = ARRAY_SIZE(ab8500_reg_init), - .regulator = ab8500_regulators, - .num_regulator = ARRAY_SIZE(ab8500_regulators), - .ext_regulator = ab8500_ext_regulators, - .num_ext_regulator = ARRAY_SIZE(ab8500_ext_regulators), -}; - /** * struct ab8500_ext_regulator_info - ab8500 regulator information * @dev: device pointer @@ -788,7 +393,6 @@ static struct ab8500_ext_regulator_info static int ab8500_ext_regulator_probe(struct platform_device *pdev) { struct ab8500 *ab8500 = dev_get_drvdata(pdev->dev.parent); - struct ab8500_regulator_platform_data *pdata = &ab8500_regulator_plat_data; struct regulator_config config = { }; struct regulator_dev *rdev; int i; @@ -798,12 +402,6 @@ static int ab8500_ext_regulator_probe(struct platform_device *pdev) return -EINVAL; } - /* make sure the platform data has the correct size */ - if (pdata->num_ext_regulator != ARRAY_SIZE(ab8500_ext_regulator_info)) { - dev_err(&pdev->dev, "Configuration error: size mismatch.\n"); - return -EINVAL; - } - /* check for AB8500 2.x */ if (is_ab8500_2p0_or_earlier(ab8500)) { struct ab8500_ext_regulator_info *info; @@ -823,11 +421,11 @@ static int ab8500_ext_regulator_probe(struct platform_device *pdev) info = &ab8500_ext_regulator_info[i]; info->dev = &pdev->dev; info->cfg = (struct ab8500_ext_regulator_cfg *) - pdata->ext_regulator[i].driver_data; + ab8500_ext_regulators[i].driver_data; config.dev = &pdev->dev; config.driver_data = info; - config.init_data = &pdata->ext_regulator[i]; + config.init_data = &ab8500_ext_regulators[i]; /* register regulator with framework */ rdev = devm_regulator_register(&pdev->dev, &info->desc, diff --git a/drivers/regulator/ab8500.c b/drivers/regulator/ab8500.c index 47b8b6f7b571..23a401734a98 100644 --- a/drivers/regulator/ab8500.c +++ b/drivers/regulator/ab8500.c @@ -25,9 +25,123 @@ #include <linux/regulator/of_regulator.h> #include <linux/regulator/driver.h> #include <linux/regulator/machine.h> -#include <linux/regulator/ab8500.h> #include <linux/slab.h> +/* AB8500 regulators */ +enum ab8500_regulator_id { + AB8500_LDO_AUX1, + AB8500_LDO_AUX2, + AB8500_LDO_AUX3, + AB8500_LDO_INTCORE, + AB8500_LDO_TVOUT, + AB8500_LDO_AUDIO, + AB8500_LDO_ANAMIC1, + AB8500_LDO_ANAMIC2, + AB8500_LDO_DMIC, + AB8500_LDO_ANA, + AB8500_NUM_REGULATORS, +}; + +/* AB8505 regulators */ +enum ab8505_regulator_id { + AB8505_LDO_AUX1, + AB8505_LDO_AUX2, + AB8505_LDO_AUX3, + AB8505_LDO_AUX4, + AB8505_LDO_AUX5, + AB8505_LDO_AUX6, + AB8505_LDO_INTCORE, + AB8505_LDO_ADC, + AB8505_LDO_AUDIO, + AB8505_LDO_ANAMIC1, + AB8505_LDO_ANAMIC2, + AB8505_LDO_AUX8, + AB8505_LDO_ANA, + AB8505_NUM_REGULATORS, +}; + +/* AB8500 registers */ +enum ab8500_regulator_reg { + AB8500_REGUREQUESTCTRL2, + AB8500_REGUREQUESTCTRL3, + AB8500_REGUREQUESTCTRL4, + AB8500_REGUSYSCLKREQ1HPVALID1, + AB8500_REGUSYSCLKREQ1HPVALID2, + AB8500_REGUHWHPREQ1VALID1, + AB8500_REGUHWHPREQ1VALID2, + AB8500_REGUHWHPREQ2VALID1, + AB8500_REGUHWHPREQ2VALID2, + AB8500_REGUSWHPREQVALID1, + AB8500_REGUSWHPREQVALID2, + AB8500_REGUSYSCLKREQVALID1, + AB8500_REGUSYSCLKREQVALID2, + AB8500_REGUMISC1, + AB8500_VAUDIOSUPPLY, + AB8500_REGUCTRL1VAMIC, + AB8500_VPLLVANAREGU, + AB8500_VREFDDR, + AB8500_EXTSUPPLYREGU, + AB8500_VAUX12REGU, + AB8500_VRF1VAUX3REGU, + AB8500_VAUX1SEL, + AB8500_VAUX2SEL, + AB8500_VRF1VAUX3SEL, + AB8500_REGUCTRL2SPARE, + AB8500_REGUCTRLDISCH, + AB8500_REGUCTRLDISCH2, + AB8500_NUM_REGULATOR_REGISTERS, +}; + +/* AB8505 registers */ +enum ab8505_regulator_reg { + AB8505_REGUREQUESTCTRL1, + AB8505_REGUREQUESTCTRL2, + AB8505_REGUREQUESTCTRL3, + AB8505_REGUREQUESTCTRL4, + AB8505_REGUSYSCLKREQ1HPVALID1, + AB8505_REGUSYSCLKREQ1HPVALID2, + AB8505_REGUHWHPREQ1VALID1, + AB8505_REGUHWHPREQ1VALID2, + AB8505_REGUHWHPREQ2VALID1, + AB8505_REGUHWHPREQ2VALID2, + AB8505_REGUSWHPREQVALID1, + AB8505_REGUSWHPREQVALID2, + AB8505_REGUSYSCLKREQVALID1, + AB8505_REGUSYSCLKREQVALID2, + AB8505_REGUVAUX4REQVALID, + AB8505_REGUMISC1, + AB8505_VAUDIOSUPPLY, + AB8505_REGUCTRL1VAMIC, + AB8505_VSMPSAREGU, + AB8505_VSMPSBREGU, + AB8505_VSAFEREGU, /* NOTE! PRCMU register */ + AB8505_VPLLVANAREGU, + AB8505_EXTSUPPLYREGU, + AB8505_VAUX12REGU, + AB8505_VRF1VAUX3REGU, + AB8505_VSMPSASEL1, + AB8505_VSMPSASEL2, + AB8505_VSMPSASEL3, + AB8505_VSMPSBSEL1, + AB8505_VSMPSBSEL2, + AB8505_VSMPSBSEL3, + AB8505_VSAFESEL1, /* NOTE! PRCMU register */ + AB8505_VSAFESEL2, /* NOTE! PRCMU register */ + AB8505_VSAFESEL3, /* NOTE! PRCMU register */ + AB8505_VAUX1SEL, + AB8505_VAUX2SEL, + AB8505_VRF1VAUX3SEL, + AB8505_VAUX4REQCTRL, + AB8505_VAUX4REGU, + AB8505_VAUX4SEL, + AB8505_REGUCTRLDISCH, + AB8505_REGUCTRLDISCH2, + AB8505_REGUCTRLDISCH3, + AB8505_CTRLVAUX5, + AB8505_CTRLVAUX6, + AB8505_NUM_REGULATOR_REGISTERS, +}; + /** * struct ab8500_shared_mode - is used when mode is shared between * two regulators. diff --git a/drivers/regulator/atc260x-regulator.c b/drivers/regulator/atc260x-regulator.c new file mode 100644 index 000000000000..d8b429955d33 --- /dev/null +++ b/drivers/regulator/atc260x-regulator.c @@ -0,0 +1,539 @@ +// SPDX-License-Identifier: GPL-2.0+ +// +// Regulator driver for ATC260x PMICs +// +// Copyright (C) 2019 Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> +// Copyright (C) 2020 Cristian Ciocaltea <cristian.ciocaltea@gmail.com> + +#include <linux/mfd/atc260x/core.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/regmap.h> +#include <linux/regulator/driver.h> + +struct atc260x_regulator_data { + int voltage_time_dcdc; + int voltage_time_ldo; +}; + +static const struct linear_range atc2603c_dcdc_voltage_ranges[] = { + REGULATOR_LINEAR_RANGE(1300000, 0, 13, 50000), + REGULATOR_LINEAR_RANGE(1950000, 14, 15, 100000), +}; + +static const struct linear_range atc2609a_dcdc_voltage_ranges[] = { + REGULATOR_LINEAR_RANGE(600000, 0, 127, 6250), + REGULATOR_LINEAR_RANGE(1400000, 128, 232, 25000), +}; + +static const struct linear_range atc2609a_ldo_voltage_ranges0[] = { + REGULATOR_LINEAR_RANGE(700000, 0, 15, 100000), + REGULATOR_LINEAR_RANGE(2100000, 16, 28, 100000), +}; + +static const struct linear_range atc2609a_ldo_voltage_ranges1[] = { + REGULATOR_LINEAR_RANGE(850000, 0, 15, 100000), + REGULATOR_LINEAR_RANGE(2100000, 16, 27, 100000), +}; + +static const unsigned int atc260x_ldo_voltage_range_sel[] = { + 0x0, 0x1, +}; + +static int atc260x_dcdc_set_voltage_time_sel(struct regulator_dev *rdev, + unsigned int old_selector, + unsigned int new_selector) +{ + struct atc260x_regulator_data *data = rdev_get_drvdata(rdev); + + if (new_selector > old_selector) + return data->voltage_time_dcdc; + + return 0; +} + +static int atc260x_ldo_set_voltage_time_sel(struct regulator_dev *rdev, + unsigned int old_selector, + unsigned int new_selector) +{ + struct atc260x_regulator_data *data = rdev_get_drvdata(rdev); + + if (new_selector > old_selector) + return data->voltage_time_ldo; + + return 0; +} + +static const struct regulator_ops atc260x_dcdc_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .list_voltage = regulator_list_voltage_linear, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_time_sel = atc260x_dcdc_set_voltage_time_sel, +}; + +static const struct regulator_ops atc260x_ldo_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .list_voltage = regulator_list_voltage_linear, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_time_sel = atc260x_ldo_set_voltage_time_sel, +}; + +static const struct regulator_ops atc260x_ldo_bypass_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .list_voltage = regulator_list_voltage_linear, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_time_sel = atc260x_ldo_set_voltage_time_sel, + .set_bypass = regulator_set_bypass_regmap, + .get_bypass = regulator_get_bypass_regmap, +}; + +static const struct regulator_ops atc260x_ldo_bypass_discharge_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .list_voltage = regulator_list_voltage_linear, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_time_sel = atc260x_ldo_set_voltage_time_sel, + .set_bypass = regulator_set_bypass_regmap, + .get_bypass = regulator_get_bypass_regmap, + .set_active_discharge = regulator_set_active_discharge_regmap, +}; + +static const struct regulator_ops atc260x_dcdc_range_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .list_voltage = regulator_list_voltage_linear_range, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_time_sel = atc260x_dcdc_set_voltage_time_sel, +}; + +static const struct regulator_ops atc260x_ldo_range_pick_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .list_voltage = regulator_list_voltage_pickable_linear_range, + .set_voltage_sel = regulator_set_voltage_sel_pickable_regmap, + .get_voltage_sel = regulator_get_voltage_sel_pickable_regmap, + .set_voltage_time_sel = atc260x_ldo_set_voltage_time_sel, +}; + +static const struct regulator_ops atc260x_dcdc_fixed_ops = { + .list_voltage = regulator_list_voltage_linear, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_time_sel = atc260x_dcdc_set_voltage_time_sel, +}; + +static const struct regulator_ops atc260x_ldo_fixed_ops = { + .list_voltage = regulator_list_voltage_linear, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_time_sel = atc260x_ldo_set_voltage_time_sel, +}; + +static const struct regulator_ops atc260x_no_ops = { +}; + +/* + * Note LDO8 is not documented in datasheet (v2.4), but supported + * in the vendor's driver implementation (xapp-le-kernel). + */ +enum atc2603c_reg_ids { + ATC2603C_ID_DCDC1, + ATC2603C_ID_DCDC2, + ATC2603C_ID_DCDC3, + ATC2603C_ID_LDO1, + ATC2603C_ID_LDO2, + ATC2603C_ID_LDO3, + ATC2603C_ID_LDO5, + ATC2603C_ID_LDO6, + ATC2603C_ID_LDO7, + ATC2603C_ID_LDO8, + ATC2603C_ID_LDO11, + ATC2603C_ID_LDO12, + ATC2603C_ID_SWITCHLDO1, + ATC2603C_ID_MAX, +}; + +#define atc2603c_reg_desc_dcdc(num, min, step, n_volt, vsel_h, vsel_l) { \ + .name = "DCDC"#num, \ + .supply_name = "dcdc"#num, \ + .of_match = of_match_ptr("dcdc"#num), \ + .regulators_node = of_match_ptr("regulators"), \ + .id = ATC2603C_ID_DCDC##num, \ + .ops = &atc260x_dcdc_ops, \ + .type = REGULATOR_VOLTAGE, \ + .min_uV = min, \ + .uV_step = step, \ + .n_voltages = n_volt, \ + .vsel_reg = ATC2603C_PMU_DC##num##_CTL0, \ + .vsel_mask = GENMASK(vsel_h, vsel_l), \ + .enable_reg = ATC2603C_PMU_DC##num##_CTL0, \ + .enable_mask = BIT(15), \ + .enable_time = 800, \ + .owner = THIS_MODULE, \ +} + +#define atc2603c_reg_desc_dcdc_range(num, vsel_h, vsel_l) { \ + .name = "DCDC"#num, \ + .supply_name = "dcdc"#num, \ + .of_match = of_match_ptr("dcdc"#num), \ + .regulators_node = of_match_ptr("regulators"), \ + .id = ATC2603C_ID_DCDC##num, \ + .ops = &atc260x_dcdc_range_ops, \ + .type = REGULATOR_VOLTAGE, \ + .n_voltages = 16, \ + .linear_ranges = atc2603c_dcdc_voltage_ranges, \ + .n_linear_ranges = ARRAY_SIZE(atc2603c_dcdc_voltage_ranges), \ + .vsel_reg = ATC2603C_PMU_DC##num##_CTL0, \ + .vsel_mask = GENMASK(vsel_h, vsel_l), \ + .enable_reg = ATC2603C_PMU_DC##num##_CTL0, \ + .enable_mask = BIT(15), \ + .enable_time = 800, \ + .owner = THIS_MODULE, \ +} + +#define atc2603c_reg_desc_dcdc_fixed(num, min, step, n_volt, vsel_h, vsel_l) { \ + .name = "DCDC"#num, \ + .supply_name = "dcdc"#num, \ + .of_match = of_match_ptr("dcdc"#num), \ + .regulators_node = of_match_ptr("regulators"), \ + .id = ATC2603C_ID_DCDC##num, \ + .ops = &atc260x_dcdc_fixed_ops, \ + .type = REGULATOR_VOLTAGE, \ + .min_uV = min, \ + .uV_step = step, \ + .n_voltages = n_volt, \ + .vsel_reg = ATC2603C_PMU_DC##num##_CTL0, \ + .vsel_mask = GENMASK(vsel_h, vsel_l), \ + .enable_time = 800, \ + .owner = THIS_MODULE, \ +} + +#define atc2603c_reg_desc_ldo(num, min, step, n_volt, vsel_h, vsel_l) { \ + .name = "LDO"#num, \ + .supply_name = "ldo"#num, \ + .of_match = of_match_ptr("ldo"#num), \ + .regulators_node = of_match_ptr("regulators"), \ + .id = ATC2603C_ID_LDO##num, \ + .ops = &atc260x_ldo_ops, \ + .type = REGULATOR_VOLTAGE, \ + .min_uV = min, \ + .uV_step = step, \ + .n_voltages = n_volt, \ + .vsel_reg = ATC2603C_PMU_LDO##num##_CTL, \ + .vsel_mask = GENMASK(vsel_h, vsel_l), \ + .enable_reg = ATC2603C_PMU_LDO##num##_CTL, \ + .enable_mask = BIT(0), \ + .enable_time = 2000, \ + .owner = THIS_MODULE, \ +} + +#define atc2603c_reg_desc_ldo_fixed(num, min, step, n_volt, vsel_h, vsel_l) { \ + .name = "LDO"#num, \ + .supply_name = "ldo"#num, \ + .of_match = of_match_ptr("ldo"#num), \ + .regulators_node = of_match_ptr("regulators"), \ + .id = ATC2603C_ID_LDO##num, \ + .ops = &atc260x_ldo_fixed_ops, \ + .type = REGULATOR_VOLTAGE, \ + .min_uV = min, \ + .uV_step = step, \ + .n_voltages = n_volt, \ + .vsel_reg = ATC2603C_PMU_LDO##num##_CTL, \ + .vsel_mask = GENMASK(vsel_h, vsel_l), \ + .enable_time = 2000, \ + .owner = THIS_MODULE, \ +} + +#define atc2603c_reg_desc_ldo_noops(num, vfixed) { \ + .name = "LDO"#num, \ + .supply_name = "ldo"#num, \ + .of_match = of_match_ptr("ldo"#num), \ + .regulators_node = of_match_ptr("regulators"), \ + .id = ATC2603C_ID_LDO##num, \ + .ops = &atc260x_no_ops, \ + .type = REGULATOR_VOLTAGE, \ + .fixed_uV = vfixed, \ + .n_voltages = 1, \ + .owner = THIS_MODULE, \ +} + +#define atc2603c_reg_desc_ldo_switch(num, min, step, n_volt, vsel_h, vsel_l) { \ + .name = "SWITCHLDO"#num, \ + .supply_name = "switchldo"#num, \ + .of_match = of_match_ptr("switchldo"#num), \ + .regulators_node = of_match_ptr("regulators"), \ + .id = ATC2603C_ID_SWITCHLDO##num, \ + .ops = &atc260x_ldo_bypass_discharge_ops, \ + .type = REGULATOR_VOLTAGE, \ + .min_uV = min, \ + .uV_step = step, \ + .n_voltages = n_volt, \ + .vsel_reg = ATC2603C_PMU_SWITCH_CTL, \ + .vsel_mask = GENMASK(vsel_h, vsel_l), \ + .enable_reg = ATC2603C_PMU_SWITCH_CTL, \ + .enable_mask = BIT(15), \ + .enable_is_inverted = true, \ + .enable_time = 2000, \ + .bypass_reg = ATC2603C_PMU_SWITCH_CTL, \ + .bypass_mask = BIT(5), \ + .active_discharge_reg = ATC2603C_PMU_SWITCH_CTL, \ + .active_discharge_mask = BIT(1), \ + .owner = THIS_MODULE, \ +} + +static const struct regulator_desc atc2603c_reg[] = { + atc2603c_reg_desc_dcdc_fixed(1, 700000, 25000, 29, 11, 7), + atc2603c_reg_desc_dcdc_range(2, 12, 8), + atc2603c_reg_desc_dcdc_fixed(3, 2600000, 100000, 8, 11, 9), + atc2603c_reg_desc_ldo_fixed(1, 2600000, 100000, 8, 15, 13), + atc2603c_reg_desc_ldo_fixed(2, 2600000, 100000, 8, 15, 13), + atc2603c_reg_desc_ldo_fixed(3, 1500000, 100000, 6, 15, 13), + atc2603c_reg_desc_ldo(5, 2600000, 100000, 8, 15, 13), + atc2603c_reg_desc_ldo_fixed(6, 700000, 25000, 29, 15, 11), + atc2603c_reg_desc_ldo(7, 1500000, 100000, 6, 15, 13), + atc2603c_reg_desc_ldo(8, 2300000, 100000, 11, 15, 12), + atc2603c_reg_desc_ldo_fixed(11, 2600000, 100000, 8, 15, 13), + atc2603c_reg_desc_ldo_noops(12, 1800000), + atc2603c_reg_desc_ldo_switch(1, 3000000, 100000, 4, 4, 3), +}; + +static const struct regulator_desc atc2603c_reg_dcdc2_ver_b = + atc2603c_reg_desc_dcdc(2, 1000000, 50000, 18, 12, 8); + +enum atc2609a_reg_ids { + ATC2609A_ID_DCDC0, + ATC2609A_ID_DCDC1, + ATC2609A_ID_DCDC2, + ATC2609A_ID_DCDC3, + ATC2609A_ID_DCDC4, + ATC2609A_ID_LDO0, + ATC2609A_ID_LDO1, + ATC2609A_ID_LDO2, + ATC2609A_ID_LDO3, + ATC2609A_ID_LDO4, + ATC2609A_ID_LDO5, + ATC2609A_ID_LDO6, + ATC2609A_ID_LDO7, + ATC2609A_ID_LDO8, + ATC2609A_ID_LDO9, + ATC2609A_ID_MAX, +}; + +#define atc2609a_reg_desc_dcdc(num, en_bit) { \ + .name = "DCDC"#num, \ + .supply_name = "dcdc"#num, \ + .of_match = of_match_ptr("dcdc"#num), \ + .regulators_node = of_match_ptr("regulators"), \ + .id = ATC2609A_ID_DCDC##num, \ + .ops = &atc260x_dcdc_ops, \ + .type = REGULATOR_VOLTAGE, \ + .min_uV = 600000, \ + .uV_step = 6250, \ + .n_voltages = 256, \ + .vsel_reg = ATC2609A_PMU_DC##num##_CTL0, \ + .vsel_mask = GENMASK(15, 8), \ + .enable_reg = ATC2609A_PMU_DC_OSC, \ + .enable_mask = BIT(en_bit), \ + .enable_time = 800, \ + .owner = THIS_MODULE, \ +} + +#define atc2609a_reg_desc_dcdc_range(num, en_bit) { \ + .name = "DCDC"#num, \ + .supply_name = "dcdc"#num, \ + .of_match = of_match_ptr("dcdc"#num), \ + .regulators_node = of_match_ptr("regulators"), \ + .id = ATC2609A_ID_DCDC##num, \ + .ops = &atc260x_dcdc_range_ops, \ + .type = REGULATOR_VOLTAGE, \ + .n_voltages = 233, \ + .linear_ranges = atc2609a_dcdc_voltage_ranges, \ + .n_linear_ranges = ARRAY_SIZE(atc2609a_dcdc_voltage_ranges), \ + .vsel_reg = ATC2609A_PMU_DC##num##_CTL0, \ + .vsel_mask = GENMASK(15, 8), \ + .enable_reg = ATC2609A_PMU_DC_OSC, \ + .enable_mask = BIT(en_bit), \ + .enable_time = 800, \ + .owner = THIS_MODULE, \ +} + +#define atc2609a_reg_desc_ldo(num) { \ + .name = "LDO"#num, \ + .supply_name = "ldo"#num, \ + .of_match = of_match_ptr("ldo"#num), \ + .regulators_node = of_match_ptr("regulators"), \ + .id = ATC2609A_ID_LDO##num, \ + .ops = &atc260x_ldo_ops, \ + .type = REGULATOR_VOLTAGE, \ + .min_uV = 700000, \ + .uV_step = 100000, \ + .n_voltages = 16, \ + .vsel_reg = ATC2609A_PMU_LDO##num##_CTL0, \ + .vsel_mask = GENMASK(4, 1), \ + .enable_reg = ATC2609A_PMU_LDO##num##_CTL0, \ + .enable_mask = BIT(0), \ + .enable_time = 2000, \ + .owner = THIS_MODULE, \ +} + +#define atc2609a_reg_desc_ldo_bypass(num) { \ + .name = "LDO"#num, \ + .supply_name = "ldo"#num, \ + .of_match = of_match_ptr("ldo"#num), \ + .regulators_node = of_match_ptr("regulators"), \ + .id = ATC2609A_ID_LDO##num, \ + .ops = &atc260x_ldo_bypass_ops, \ + .type = REGULATOR_VOLTAGE, \ + .min_uV = 2300000, \ + .uV_step = 100000, \ + .n_voltages = 12, \ + .vsel_reg = ATC2609A_PMU_LDO##num##_CTL0, \ + .vsel_mask = GENMASK(5, 2), \ + .enable_reg = ATC2609A_PMU_LDO##num##_CTL0, \ + .enable_mask = BIT(0), \ + .enable_time = 2000, \ + .bypass_reg = ATC2609A_PMU_LDO##num##_CTL0, \ + .bypass_mask = BIT(1), \ + .owner = THIS_MODULE, \ +} + +#define atc2609a_reg_desc_ldo_range_pick(num, n_range) { \ + .name = "LDO"#num, \ + .supply_name = "ldo"#num, \ + .of_match = of_match_ptr("ldo"#num), \ + .regulators_node = of_match_ptr("regulators"), \ + .id = ATC2609A_ID_LDO##num, \ + .ops = &atc260x_ldo_range_pick_ops, \ + .type = REGULATOR_VOLTAGE, \ + .linear_ranges = atc2609a_ldo_voltage_ranges##n_range, \ + .n_linear_ranges = ARRAY_SIZE(atc2609a_ldo_voltage_ranges##n_range), \ + .vsel_reg = ATC2609A_PMU_LDO##num##_CTL0, \ + .vsel_mask = GENMASK(4, 1), \ + .vsel_range_reg = ATC2609A_PMU_LDO##num##_CTL0, \ + .vsel_range_mask = BIT(5), \ + .linear_range_selectors = atc260x_ldo_voltage_range_sel, \ + .enable_reg = ATC2609A_PMU_LDO##num##_CTL0, \ + .enable_mask = BIT(0), \ + .enable_time = 2000, \ + .owner = THIS_MODULE, \ +} + +#define atc2609a_reg_desc_ldo_fixed(num) { \ + .name = "LDO"#num, \ + .supply_name = "ldo"#num, \ + .of_match = of_match_ptr("ldo"#num), \ + .regulators_node = of_match_ptr("regulators"), \ + .id = ATC2609A_ID_LDO##num, \ + .ops = &atc260x_ldo_fixed_ops, \ + .type = REGULATOR_VOLTAGE, \ + .min_uV = 2600000, \ + .uV_step = 100000, \ + .n_voltages = 8, \ + .vsel_reg = ATC2609A_PMU_LDO##num##_CTL, \ + .vsel_mask = GENMASK(15, 13), \ + .enable_time = 2000, \ + .owner = THIS_MODULE, \ +} + +static const struct regulator_desc atc2609a_reg[] = { + atc2609a_reg_desc_dcdc(0, 4), + atc2609a_reg_desc_dcdc(1, 5), + atc2609a_reg_desc_dcdc(2, 6), + atc2609a_reg_desc_dcdc_range(3, 7), + atc2609a_reg_desc_dcdc(4, 8), + atc2609a_reg_desc_ldo_bypass(0), + atc2609a_reg_desc_ldo_bypass(1), + atc2609a_reg_desc_ldo_bypass(2), + atc2609a_reg_desc_ldo_range_pick(3, 0), + atc2609a_reg_desc_ldo_range_pick(4, 0), + atc2609a_reg_desc_ldo(5), + atc2609a_reg_desc_ldo_range_pick(6, 1), + atc2609a_reg_desc_ldo_range_pick(7, 0), + atc2609a_reg_desc_ldo_range_pick(8, 0), + atc2609a_reg_desc_ldo_fixed(9), +}; + +static int atc260x_regulator_probe(struct platform_device *pdev) +{ + struct atc260x *atc260x = dev_get_drvdata(pdev->dev.parent); + struct device *dev = atc260x->dev; + struct atc260x_regulator_data *atc260x_data; + struct regulator_config config = {}; + struct regulator_dev *atc260x_rdev; + const struct regulator_desc *regulators; + bool atc2603c_ver_b = false; + int i, nregulators; + + atc260x_data = devm_kzalloc(&pdev->dev, sizeof(*atc260x_data), GFP_KERNEL); + if (!atc260x_data) + return -ENOMEM; + + atc260x_data->voltage_time_dcdc = 350; + atc260x_data->voltage_time_ldo = 800; + + switch (atc260x->ic_type) { + case ATC2603C: + regulators = atc2603c_reg; + nregulators = ATC2603C_ID_MAX; + atc2603c_ver_b = atc260x->ic_ver == ATC260X_B; + break; + case ATC2609A: + atc260x_data->voltage_time_dcdc = 250; + regulators = atc2609a_reg; + nregulators = ATC2609A_ID_MAX; + break; + default: + dev_err(dev, "unsupported ATC260X ID %d\n", atc260x->ic_type); + return -EINVAL; + } + + config.dev = dev; + config.regmap = atc260x->regmap; + config.driver_data = atc260x_data; + + /* Instantiate the regulators */ + for (i = 0; i < nregulators; i++) { + if (atc2603c_ver_b && regulators[i].id == ATC2603C_ID_DCDC2) + atc260x_rdev = devm_regulator_register(&pdev->dev, + &atc2603c_reg_dcdc2_ver_b, + &config); + else + atc260x_rdev = devm_regulator_register(&pdev->dev, + ®ulators[i], + &config); + if (IS_ERR(atc260x_rdev)) { + dev_err(dev, "failed to register regulator: %d\n", i); + return PTR_ERR(atc260x_rdev); + } + } + + return 0; +} + +static struct platform_driver atc260x_regulator_driver = { + .probe = atc260x_regulator_probe, + .driver = { + .name = "atc260x-regulator", + }, +}; + +module_platform_driver(atc260x_regulator_driver); + +MODULE_DESCRIPTION("Regulator driver for ATC260x PMICs"); +MODULE_AUTHOR("Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>"); +MODULE_AUTHOR("Cristian Ciocaltea <cristian.ciocaltea@gmail.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/regulator/axp20x-regulator.c b/drivers/regulator/axp20x-regulator.c index 90cb8445f721..d260c442b788 100644 --- a/drivers/regulator/axp20x-regulator.c +++ b/drivers/regulator/axp20x-regulator.c @@ -1070,7 +1070,7 @@ static int axp20x_set_dcdc_freq(struct platform_device *pdev, u32 dcdcfreq) static int axp20x_regulator_parse_dt(struct platform_device *pdev) { struct device_node *np, *regulators; - int ret; + int ret = 0; u32 dcdcfreq = 0; np = of_node_get(pdev->dev.parent->of_node); @@ -1085,13 +1085,12 @@ static int axp20x_regulator_parse_dt(struct platform_device *pdev) ret = axp20x_set_dcdc_freq(pdev, dcdcfreq); if (ret < 0) { dev_err(&pdev->dev, "Error setting dcdc frequency: %d\n", ret); - return ret; } - of_node_put(regulators); } - return 0; + of_node_put(np); + return ret; } static int axp20x_set_dcdc_workmode(struct regulator_dev *rdev, int id, u32 workmode) diff --git a/drivers/regulator/bd70528-regulator.c b/drivers/regulator/bd70528-regulator.c index d44adf7e875a..1f5f9482b209 100644 --- a/drivers/regulator/bd70528-regulator.c +++ b/drivers/regulator/bd70528-regulator.c @@ -244,19 +244,14 @@ static const struct regulator_desc bd70528_desc[] = { static int bd70528_probe(struct platform_device *pdev) { - struct rohm_regmap_dev *bd70528; int i; struct regulator_config config = { .dev = pdev->dev.parent, }; - bd70528 = dev_get_drvdata(pdev->dev.parent); - if (!bd70528) { - dev_err(&pdev->dev, "No MFD driver data\n"); - return -EINVAL; - } - - config.regmap = bd70528->regmap; + config.regmap = dev_get_regmap(pdev->dev.parent, NULL); + if (!config.regmap) + return -ENODEV; for (i = 0; i < ARRAY_SIZE(bd70528_desc); i++) { struct regulator_dev *rdev; diff --git a/drivers/regulator/bd71828-regulator.c b/drivers/regulator/bd71828-regulator.c index 85c0b9000963..6b12e963ed8f 100644 --- a/drivers/regulator/bd71828-regulator.c +++ b/drivers/regulator/bd71828-regulator.c @@ -749,19 +749,14 @@ static const struct bd71828_regulator_data bd71828_rdata[] = { static int bd71828_probe(struct platform_device *pdev) { - struct rohm_regmap_dev *bd71828; int i, j, ret; struct regulator_config config = { .dev = pdev->dev.parent, }; - bd71828 = dev_get_drvdata(pdev->dev.parent); - if (!bd71828) { - dev_err(&pdev->dev, "No MFD driver data\n"); - return -EINVAL; - } - - config.regmap = bd71828->regmap; + config.regmap = dev_get_regmap(pdev->dev.parent, NULL); + if (!config.regmap) + return -ENODEV; for (i = 0; i < ARRAY_SIZE(bd71828_rdata); i++) { struct regulator_dev *rdev; @@ -777,7 +772,7 @@ static int bd71828_probe(struct platform_device *pdev) return PTR_ERR(rdev); } for (j = 0; j < rd->reg_init_amnt; j++) { - ret = regmap_update_bits(bd71828->regmap, + ret = regmap_update_bits(config.regmap, rd->reg_inits[j].reg, rd->reg_inits[j].mask, rd->reg_inits[j].val); diff --git a/drivers/regulator/bd718x7-regulator.c b/drivers/regulator/bd718x7-regulator.c index 9309765d0450..8ff47ea522d6 100644 --- a/drivers/regulator/bd718x7-regulator.c +++ b/drivers/regulator/bd718x7-regulator.c @@ -1554,7 +1554,7 @@ err_out: static int bd718xx_probe(struct platform_device *pdev) { - struct bd718xx *mfd; + struct regmap *regmap; struct regulator_config config = { 0 }; int i, j, err, omit_enable; bool use_snvs; @@ -1563,11 +1563,10 @@ static int bd718xx_probe(struct platform_device *pdev) enum rohm_chip_type chip = platform_get_device_id(pdev)->driver_data; const struct regulator_ops **swops, **hwops; - mfd = dev_get_drvdata(pdev->dev.parent); - if (!mfd) { + regmap = dev_get_regmap(pdev->dev.parent, NULL); + if (!regmap) { dev_err(&pdev->dev, "No MFD driver data\n"); - err = -EINVAL; - goto err; + return -EINVAL; } switch (chip) { @@ -1590,7 +1589,7 @@ static int bd718xx_probe(struct platform_device *pdev) } /* Register LOCK release */ - err = regmap_update_bits(mfd->chip.regmap, BD718XX_REG_REGLOCK, + err = regmap_update_bits(regmap, BD718XX_REG_REGLOCK, (REGLOCK_PWRSEQ | REGLOCK_VREG), 0); if (err) { dev_err(&pdev->dev, "Failed to unlock PMIC (%d)\n", err); @@ -1609,8 +1608,7 @@ static int bd718xx_probe(struct platform_device *pdev) * bit allowing HW defaults for power rails to be used */ if (!use_snvs) { - err = regmap_update_bits(mfd->chip.regmap, - BD718XX_REG_TRANS_COND1, + err = regmap_update_bits(regmap, BD718XX_REG_TRANS_COND1, BD718XX_ON_REQ_POWEROFF_MASK | BD718XX_SWRESET_POWEROFF_MASK | BD718XX_WDOG_POWEROFF_MASK | @@ -1626,7 +1624,7 @@ static int bd718xx_probe(struct platform_device *pdev) } config.dev = pdev->dev.parent; - config.regmap = mfd->chip.regmap; + config.regmap = regmap; /* * There are cases when we want to leave the enable-control for * the HW state machine and use this driver only for voltage control. @@ -1685,7 +1683,7 @@ static int bd718xx_probe(struct platform_device *pdev) if (!no_enable_control && (!use_snvs || !rdev->constraints->always_on || !rdev->constraints->boot_on)) { - err = regmap_update_bits(mfd->chip.regmap, r->init.reg, + err = regmap_update_bits(regmap, r->init.reg, r->init.mask, r->init.val); if (err) { dev_err(&pdev->dev, @@ -1695,7 +1693,7 @@ static int bd718xx_probe(struct platform_device *pdev) } } for (j = 0; j < r->additional_init_amnt; j++) { - err = regmap_update_bits(mfd->chip.regmap, + err = regmap_update_bits(regmap, r->additional_inits[j].reg, r->additional_inits[j].mask, r->additional_inits[j].val); diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 67a768fe5b2a..16114aea099a 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -1617,7 +1617,7 @@ static struct regulator *create_regulator(struct regulator_dev *rdev, const char *supply_name) { struct regulator *regulator; - int err; + int err = 0; if (dev) { char buf[REG_STR_SIZE]; @@ -1663,8 +1663,8 @@ static struct regulator *create_regulator(struct regulator_dev *rdev, } } - regulator->debugfs = debugfs_create_dir(supply_name, - rdev->debugfs); + if (err != -EEXIST) + regulator->debugfs = debugfs_create_dir(supply_name, rdev->debugfs); if (!regulator->debugfs) { rdev_dbg(rdev, "Failed to create debugfs directory\n"); } else { @@ -2042,7 +2042,7 @@ struct regulator *_regulator_get(struct device *dev, const char *id, * Returns a struct regulator corresponding to the regulator producer, * or IS_ERR() condition containing errno. * - * Use of supply names configured via regulator_set_device_supply() is + * Use of supply names configured via set_consumer_device_supply() is * strongly encouraged. It is recommended that the supply name used * should match the name used for the supply and/or the relevant * device pins in the datasheet. @@ -2069,7 +2069,7 @@ EXPORT_SYMBOL_GPL(regulator_get); * regulator off for correct operation of the hardware they are * controlling. * - * Use of supply names configured via regulator_set_device_supply() is + * Use of supply names configured via set_consumer_device_supply() is * strongly encouraged. It is recommended that the supply name used * should match the name used for the supply and/or the relevant * device pins in the datasheet. @@ -2095,7 +2095,7 @@ EXPORT_SYMBOL_GPL(regulator_get_exclusive); * disrupting the operation of drivers that can handle absent * supplies. * - * Use of supply names configured via regulator_set_device_supply() is + * Use of supply names configured via set_consumer_device_supply() is * strongly encouraged. It is recommended that the supply name used * should match the name used for the supply and/or the relevant * device pins in the datasheet. @@ -4153,7 +4153,11 @@ int regulator_sync_voltage(struct regulator *regulator) if (ret < 0) goto out; - ret = _regulator_do_set_voltage(rdev, min_uV, max_uV); + /* balance only, if regulator is coupled */ + if (rdev->coupling_desc.n_coupled > 1) + ret = regulator_balance_voltage(rdev, PM_SUSPEND_ON); + else + ret = _regulator_do_set_voltage(rdev, min_uV, max_uV); out: regulator_unlock(rdev); diff --git a/drivers/regulator/mcp16502.c b/drivers/regulator/mcp16502.c index 74ad92dc664a..88c6bd5b6c78 100644 --- a/drivers/regulator/mcp16502.c +++ b/drivers/regulator/mcp16502.c @@ -550,7 +550,7 @@ static int mcp16502_probe(struct i2c_client *client, config.regmap = rmap; config.driver_data = mcp; - mcp->lpm = devm_gpiod_get(dev, "lpm", GPIOD_OUT_LOW); + mcp->lpm = devm_gpiod_get_optional(dev, "lpm", GPIOD_OUT_LOW); if (IS_ERR(mcp->lpm)) { dev_err(dev, "failed to get lpm pin: %ld\n", PTR_ERR(mcp->lpm)); return PTR_ERR(mcp->lpm); diff --git a/drivers/regulator/mt6315-regulator.c b/drivers/regulator/mt6315-regulator.c new file mode 100644 index 000000000000..d49a1534d8e9 --- /dev/null +++ b/drivers/regulator/mt6315-regulator.c @@ -0,0 +1,299 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (c) 2021 MediaTek Inc. + +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/regmap.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/mt6315-regulator.h> +#include <linux/regulator/of_regulator.h> +#include <linux/spmi.h> + +#define MT6315_BUCK_MODE_AUTO 0 +#define MT6315_BUCK_MODE_FORCE_PWM 1 +#define MT6315_BUCK_MODE_LP 2 + +struct mt6315_regulator_info { + struct regulator_desc desc; + u32 status_reg; + u32 lp_mode_mask; + u32 lp_mode_shift; +}; + +struct mt_regulator_init_data { + u32 modeset_mask[MT6315_VBUCK_MAX]; +}; + +struct mt6315_chip { + struct device *dev; + struct regmap *regmap; +}; + +#define MT_BUCK(_name, _bid, _vsel) \ +[_bid] = { \ + .desc = { \ + .name = _name, \ + .of_match = of_match_ptr(_name), \ + .regulators_node = "regulators", \ + .ops = &mt6315_volt_range_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = _bid, \ + .owner = THIS_MODULE, \ + .n_voltages = 0xbf, \ + .linear_ranges = mt_volt_range1, \ + .n_linear_ranges = ARRAY_SIZE(mt_volt_range1), \ + .vsel_reg = _vsel, \ + .vsel_mask = 0xff, \ + .enable_reg = MT6315_BUCK_TOP_CON0, \ + .enable_mask = BIT(_bid), \ + .of_map_mode = mt6315_map_mode, \ + }, \ + .status_reg = _bid##_DBG4, \ + .lp_mode_mask = BIT(_bid), \ + .lp_mode_shift = _bid, \ +} + +static const struct linear_range mt_volt_range1[] = { + REGULATOR_LINEAR_RANGE(0, 0, 0xbf, 6250), +}; + +static unsigned int mt6315_map_mode(u32 mode) +{ + switch (mode) { + case MT6315_BUCK_MODE_AUTO: + return REGULATOR_MODE_NORMAL; + case MT6315_BUCK_MODE_FORCE_PWM: + return REGULATOR_MODE_FAST; + case MT6315_BUCK_MODE_LP: + return REGULATOR_MODE_IDLE; + default: + return -EINVAL; + } +} + +static unsigned int mt6315_regulator_get_mode(struct regulator_dev *rdev) +{ + struct mt_regulator_init_data *init = rdev_get_drvdata(rdev); + const struct mt6315_regulator_info *info; + int ret, regval; + u32 modeset_mask; + + info = container_of(rdev->desc, struct mt6315_regulator_info, desc); + modeset_mask = init->modeset_mask[rdev_get_id(rdev)]; + ret = regmap_read(rdev->regmap, MT6315_BUCK_TOP_4PHASE_ANA_CON42, ®val); + if (ret != 0) { + dev_notice(&rdev->dev, "Failed to get mode: %d\n", ret); + return ret; + } + + if ((regval & modeset_mask) == modeset_mask) + return REGULATOR_MODE_FAST; + + ret = regmap_read(rdev->regmap, MT6315_BUCK_TOP_CON1, ®val); + if (ret != 0) { + dev_notice(&rdev->dev, "Failed to get lp mode: %d\n", ret); + return ret; + } + + if (regval & info->lp_mode_mask) + return REGULATOR_MODE_IDLE; + else + return REGULATOR_MODE_NORMAL; +} + +static int mt6315_regulator_set_mode(struct regulator_dev *rdev, + u32 mode) +{ + struct mt_regulator_init_data *init = rdev_get_drvdata(rdev); + const struct mt6315_regulator_info *info; + int ret, val, curr_mode; + u32 modeset_mask; + + info = container_of(rdev->desc, struct mt6315_regulator_info, desc); + modeset_mask = init->modeset_mask[rdev_get_id(rdev)]; + curr_mode = mt6315_regulator_get_mode(rdev); + switch (mode) { + case REGULATOR_MODE_FAST: + ret = regmap_update_bits(rdev->regmap, + MT6315_BUCK_TOP_4PHASE_ANA_CON42, + modeset_mask, + modeset_mask); + break; + case REGULATOR_MODE_NORMAL: + if (curr_mode == REGULATOR_MODE_FAST) { + ret = regmap_update_bits(rdev->regmap, + MT6315_BUCK_TOP_4PHASE_ANA_CON42, + modeset_mask, + 0); + } else if (curr_mode == REGULATOR_MODE_IDLE) { + ret = regmap_update_bits(rdev->regmap, + MT6315_BUCK_TOP_CON1, + info->lp_mode_mask, + 0); + usleep_range(100, 110); + } else { + ret = -EINVAL; + } + break; + case REGULATOR_MODE_IDLE: + val = MT6315_BUCK_MODE_LP >> 1; + val <<= info->lp_mode_shift; + ret = regmap_update_bits(rdev->regmap, + MT6315_BUCK_TOP_CON1, + info->lp_mode_mask, + val); + break; + default: + ret = -EINVAL; + dev_notice(&rdev->dev, "Unsupported mode: %d\n", mode); + break; + } + + if (ret != 0) { + dev_notice(&rdev->dev, "Failed to set mode: %d\n", ret); + return ret; + } + + return 0; +} + +static int mt6315_get_status(struct regulator_dev *rdev) +{ + const struct mt6315_regulator_info *info; + int ret; + u32 regval; + + info = container_of(rdev->desc, struct mt6315_regulator_info, desc); + ret = regmap_read(rdev->regmap, info->status_reg, ®val); + if (ret < 0) { + dev_notice(&rdev->dev, "Failed to get enable reg: %d\n", ret); + return ret; + } + + return (regval & BIT(0)) ? REGULATOR_STATUS_ON : REGULATOR_STATUS_OFF; +} + +static const struct regulator_ops mt6315_volt_range_ops = { + .list_voltage = regulator_list_voltage_linear_range, + .map_voltage = regulator_map_voltage_linear_range, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_time_sel = regulator_set_voltage_time_sel, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .get_status = mt6315_get_status, + .set_mode = mt6315_regulator_set_mode, + .get_mode = mt6315_regulator_get_mode, +}; + +static const struct mt6315_regulator_info mt6315_regulators[MT6315_VBUCK_MAX] = { + MT_BUCK("vbuck1", MT6315_VBUCK1, MT6315_BUCK_TOP_ELR0), + MT_BUCK("vbuck2", MT6315_VBUCK2, MT6315_BUCK_TOP_ELR2), + MT_BUCK("vbuck3", MT6315_VBUCK3, MT6315_BUCK_TOP_ELR4), + MT_BUCK("vbuck4", MT6315_VBUCK4, MT6315_BUCK_TOP_ELR6), +}; + +static const struct regmap_config mt6315_regmap_config = { + .reg_bits = 16, + .val_bits = 8, + .max_register = 0x16d0, + .fast_io = true, +}; + +static const struct of_device_id mt6315_of_match[] = { + { + .compatible = "mediatek,mt6315-regulator", + }, { + /* sentinel */ + }, +}; +MODULE_DEVICE_TABLE(of, mt6315_of_match); + +static int mt6315_regulator_probe(struct spmi_device *pdev) +{ + struct device *dev = &pdev->dev; + struct regmap *regmap; + struct mt6315_chip *chip; + struct mt_regulator_init_data *init_data; + struct regulator_config config = {}; + struct regulator_dev *rdev; + int i; + + regmap = devm_regmap_init_spmi_ext(pdev, &mt6315_regmap_config); + if (!regmap) + return -ENODEV; + + chip = devm_kzalloc(dev, sizeof(struct mt6315_chip), GFP_KERNEL); + if (!chip) + return -ENOMEM; + + init_data = devm_kzalloc(dev, sizeof(struct mt_regulator_init_data), GFP_KERNEL); + if (!init_data) + return -ENOMEM; + + switch (pdev->usid) { + case MT6315_PP: + init_data->modeset_mask[MT6315_VBUCK1] = BIT(MT6315_VBUCK1) | BIT(MT6315_VBUCK2) | + BIT(MT6315_VBUCK4); + break; + case MT6315_SP: + case MT6315_RP: + init_data->modeset_mask[MT6315_VBUCK1] = BIT(MT6315_VBUCK1) | BIT(MT6315_VBUCK2); + break; + default: + init_data->modeset_mask[MT6315_VBUCK1] = BIT(MT6315_VBUCK1); + break; + } + for (i = MT6315_VBUCK2; i < MT6315_VBUCK_MAX; i++) + init_data->modeset_mask[i] = BIT(i); + + chip->dev = dev; + chip->regmap = regmap; + dev_set_drvdata(dev, chip); + + config.dev = dev; + config.regmap = regmap; + for (i = MT6315_VBUCK1; i < MT6315_VBUCK_MAX; i++) { + config.driver_data = init_data; + rdev = devm_regulator_register(dev, &mt6315_regulators[i].desc, &config); + if (IS_ERR(rdev)) { + dev_notice(dev, "Failed to register %s\n", mt6315_regulators[i].desc.name); + continue; + } + } + + return 0; +} + +static void mt6315_regulator_shutdown(struct spmi_device *pdev) +{ + struct mt6315_chip *chip = dev_get_drvdata(&pdev->dev); + int ret = 0; + + ret |= regmap_write(chip->regmap, MT6315_TOP_TMA_KEY_H, PROTECTION_KEY_H); + ret |= regmap_write(chip->regmap, MT6315_TOP_TMA_KEY, PROTECTION_KEY); + ret |= regmap_update_bits(chip->regmap, MT6315_TOP2_ELR7, 1, 1); + ret |= regmap_write(chip->regmap, MT6315_TOP_TMA_KEY, 0); + ret |= regmap_write(chip->regmap, MT6315_TOP_TMA_KEY_H, 0); + if (ret < 0) + dev_notice(&pdev->dev, "[%#x] Failed to enable power off sequence. %d\n", + pdev->usid, ret); +} + +static struct spmi_driver mt6315_regulator_driver = { + .driver = { + .name = "mt6315-regulator", + .of_match_table = mt6315_of_match, + }, + .probe = mt6315_regulator_probe, + .shutdown = mt6315_regulator_shutdown, +}; + +module_spmi_driver(mt6315_regulator_driver); + +MODULE_AUTHOR("Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>"); +MODULE_DESCRIPTION("Regulator Driver for MediaTek MT6315 PMIC"); +MODULE_LICENSE("GPL"); diff --git a/drivers/regulator/mtk-dvfsrc-regulator.c b/drivers/regulator/mtk-dvfsrc-regulator.c new file mode 100644 index 000000000000..d3d876198d6e --- /dev/null +++ b/drivers/regulator/mtk-dvfsrc-regulator.c @@ -0,0 +1,215 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (c) 2020 MediaTek Inc. + +#include <linux/err.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/of_device.h> +#include <linux/of_platform.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/of_regulator.h> +#include <linux/soc/mediatek/mtk_dvfsrc.h> + +#define DVFSRC_ID_VCORE 0 +#define DVFSRC_ID_VSCP 1 + +#define MT_DVFSRC_REGULAR(match, _name, _volt_table) \ +[DVFSRC_ID_##_name] = { \ + .desc = { \ + .name = match, \ + .of_match = of_match_ptr(match), \ + .ops = &dvfsrc_vcore_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = DVFSRC_ID_##_name, \ + .owner = THIS_MODULE, \ + .n_voltages = ARRAY_SIZE(_volt_table), \ + .volt_table = _volt_table, \ + }, \ +} + +/* + * DVFSRC regulators' information + * + * @desc: standard fields of regulator description. + * @voltage_selector: Selector used for get_voltage_sel() and + * set_voltage_sel() callbacks + */ + +struct dvfsrc_regulator { + struct regulator_desc desc; +}; + +/* + * MTK DVFSRC regulators' init data + * + * @size: num of regulators + * @regulator_info: regulator info. + */ +struct dvfsrc_regulator_init_data { + u32 size; + struct dvfsrc_regulator *regulator_info; +}; + +static inline struct device *to_dvfsrc_dev(struct regulator_dev *rdev) +{ + return rdev_get_dev(rdev)->parent; +} + +static int dvfsrc_set_voltage_sel(struct regulator_dev *rdev, + unsigned int selector) +{ + struct device *dvfsrc_dev = to_dvfsrc_dev(rdev); + int id = rdev_get_id(rdev); + + if (id == DVFSRC_ID_VCORE) + mtk_dvfsrc_send_request(dvfsrc_dev, + MTK_DVFSRC_CMD_VCORE_REQUEST, + selector); + else if (id == DVFSRC_ID_VSCP) + mtk_dvfsrc_send_request(dvfsrc_dev, + MTK_DVFSRC_CMD_VSCP_REQUEST, + selector); + else + return -EINVAL; + + return 0; +} + +static int dvfsrc_get_voltage_sel(struct regulator_dev *rdev) +{ + struct device *dvfsrc_dev = to_dvfsrc_dev(rdev); + int id = rdev_get_id(rdev); + int val, ret; + + if (id == DVFSRC_ID_VCORE) + ret = mtk_dvfsrc_query_info(dvfsrc_dev, + MTK_DVFSRC_CMD_VCORE_LEVEL_QUERY, + &val); + else if (id == DVFSRC_ID_VSCP) + ret = mtk_dvfsrc_query_info(dvfsrc_dev, + MTK_DVFSRC_CMD_VSCP_LEVEL_QUERY, + &val); + else + return -EINVAL; + + if (ret != 0) + return ret; + + return val; +} + +static const struct regulator_ops dvfsrc_vcore_ops = { + .list_voltage = regulator_list_voltage_table, + .get_voltage_sel = dvfsrc_get_voltage_sel, + .set_voltage_sel = dvfsrc_set_voltage_sel, +}; + +static const unsigned int mt8183_voltages[] = { + 725000, + 800000, +}; + +static struct dvfsrc_regulator mt8183_regulators[] = { + MT_DVFSRC_REGULAR("dvfsrc-vcore", VCORE, + mt8183_voltages), +}; + +static const struct dvfsrc_regulator_init_data regulator_mt8183_data = { + .size = ARRAY_SIZE(mt8183_regulators), + .regulator_info = &mt8183_regulators[0], +}; + +static const unsigned int mt6873_voltages[] = { + 575000, + 600000, + 650000, + 725000, +}; + +static struct dvfsrc_regulator mt6873_regulators[] = { + MT_DVFSRC_REGULAR("dvfsrc-vcore", VCORE, + mt6873_voltages), + MT_DVFSRC_REGULAR("dvfsrc-vscp", VSCP, + mt6873_voltages), +}; + +static const struct dvfsrc_regulator_init_data regulator_mt6873_data = { + .size = ARRAY_SIZE(mt6873_regulators), + .regulator_info = &mt6873_regulators[0], +}; + +static const struct of_device_id mtk_dvfsrc_regulator_match[] = { + { + .compatible = "mediatek,mt8183-dvfsrc", + .data = ®ulator_mt8183_data, + }, { + .compatible = "mediatek,mt8192-dvfsrc", + .data = ®ulator_mt6873_data, + }, { + .compatible = "mediatek,mt6873-dvfsrc", + .data = ®ulator_mt6873_data, + }, { + /* sentinel */ + }, +}; +MODULE_DEVICE_TABLE(of, mtk_dvfsrc_regulator_match); + +static int dvfsrc_vcore_regulator_probe(struct platform_device *pdev) +{ + const struct of_device_id *match; + struct device *dev = &pdev->dev; + struct regulator_config config = { }; + struct regulator_dev *rdev; + const struct dvfsrc_regulator_init_data *regulator_init_data; + struct dvfsrc_regulator *mt_regulators; + int i; + + match = of_match_node(mtk_dvfsrc_regulator_match, dev->parent->of_node); + + if (!match) { + dev_err(dev, "invalid compatible string\n"); + return -ENODEV; + } + + regulator_init_data = match->data; + + mt_regulators = regulator_init_data->regulator_info; + for (i = 0; i < regulator_init_data->size; i++) { + config.dev = dev->parent; + config.driver_data = (mt_regulators + i); + rdev = devm_regulator_register(dev->parent, + &(mt_regulators + i)->desc, + &config); + if (IS_ERR(rdev)) { + dev_err(dev, "failed to register %s\n", + (mt_regulators + i)->desc.name); + return PTR_ERR(rdev); + } + } + + return 0; +} + +static struct platform_driver mtk_dvfsrc_regulator_driver = { + .driver = { + .name = "mtk-dvfsrc-regulator", + }, + .probe = dvfsrc_vcore_regulator_probe, +}; + +static int __init mtk_dvfsrc_regulator_init(void) +{ + return platform_driver_register(&mtk_dvfsrc_regulator_driver); +} +subsys_initcall(mtk_dvfsrc_regulator_init); + +static void __exit mtk_dvfsrc_regulator_exit(void) +{ + platform_driver_unregister(&mtk_dvfsrc_regulator_driver); +} +module_exit(mtk_dvfsrc_regulator_exit); + +MODULE_AUTHOR("Arvin wang <arvin.wang@mediatek.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/regulator/pca9450-regulator.c b/drivers/regulator/pca9450-regulator.c index cb29421d745a..833d398c6aa2 100644 --- a/drivers/regulator/pca9450-regulator.c +++ b/drivers/regulator/pca9450-regulator.c @@ -5,6 +5,7 @@ */ #include <linux/err.h> +#include <linux/gpio/consumer.h> #include <linux/i2c.h> #include <linux/interrupt.h> #include <linux/kernel.h> @@ -32,6 +33,7 @@ struct pca9450_regulator_desc { struct pca9450 { struct device *dev; struct regmap *regmap; + struct gpio_desc *sd_vsel_gpio; enum pca9450_chip_type type; unsigned int rcnt; int irq; @@ -795,6 +797,26 @@ static int pca9450_i2c_probe(struct i2c_client *i2c, return ret; } + /* Set reset behavior on assertion of WDOG_B signal */ + ret = regmap_update_bits(pca9450->regmap, PCA9450_REG_RESET_CTRL, + WDOG_B_CFG_MASK, WDOG_B_CFG_COLD_LDO12); + if (ret) { + dev_err(&i2c->dev, "Failed to set WDOG_B reset behavior\n"); + return ret; + } + + /* + * The driver uses the LDO5CTRL_H register to control the LDO5 regulator. + * This is only valid if the SD_VSEL input of the PMIC is high. Let's + * check if the pin is available as GPIO and set it to high. + */ + pca9450->sd_vsel_gpio = gpiod_get_optional(pca9450->dev, "sd-vsel", GPIOD_OUT_HIGH); + + if (IS_ERR(pca9450->sd_vsel_gpio)) { + dev_err(&i2c->dev, "Failed to get SD_VSEL GPIO\n"); + return ret; + } + dev_info(&i2c->dev, "%s probed.\n", type == PCA9450_TYPE_PCA9450A ? "pca9450a" : "pca9450bc"); diff --git a/drivers/regulator/pf8x00-regulator.c b/drivers/regulator/pf8x00-regulator.c index e1dba70fb78f..9b28bd63208d 100644 --- a/drivers/regulator/pf8x00-regulator.c +++ b/drivers/regulator/pf8x00-regulator.c @@ -114,7 +114,6 @@ enum swxilim_bits { #define PF8X00_SWXILIM_SHIFT 3 #define PF8X00_SWXILIM_MASK GENMASK(4, 3) #define PF8X00_SWXPHASE_MASK GENMASK(2, 0) -#define PF8X00_SWXPHASE_DEFAULT 0 #define PF8X00_SWXPHASE_SHIFT 7 enum pf8x00_devid { @@ -126,10 +125,12 @@ enum pf8x00_devid { #define PF8X00_DEVICE_FAM_MASK GENMASK(7, 4) #define PF8X00_DEVICE_ID_MASK GENMASK(3, 0) -struct pf8x00_regulator { +struct pf8x00_regulator_data { struct regulator_desc desc; - u8 ilim; - u8 phase_shift; + unsigned int suspend_enable_reg; + unsigned int suspend_enable_mask; + unsigned int suspend_voltage_reg; + unsigned int suspend_voltage_cache; }; struct pf8x00_chip { @@ -150,35 +151,16 @@ static const int pf8x00_ldo_voltages[] = { 3100000, 3150000, 3200000, 3300000, 3350000, 1650000, 1700000, 5000000, }; -#define SWV(i) (6250 * i + 400000) -#define SWV_LINE(i) SWV(i*8+0), SWV(i*8+1), SWV(i*8+2), SWV(i*8+3), \ - SWV(i*8+4), SWV(i*8+5), SWV(i*8+6), SWV(i*8+7) +/* Output: 2.1A to 4.5A */ +static const unsigned int pf8x00_sw_current_table[] = { + 2100000, 2600000, 3000000, 4500000, +}; /* Output: 0.4V to 1.8V */ -static const int pf8x00_sw1_to_6_voltages[] = { - SWV_LINE(0), - SWV_LINE(1), - SWV_LINE(2), - SWV_LINE(3), - SWV_LINE(4), - SWV_LINE(5), - SWV_LINE(6), - SWV_LINE(7), - SWV_LINE(8), - SWV_LINE(9), - SWV_LINE(10), - SWV_LINE(11), - SWV_LINE(12), - SWV_LINE(13), - SWV_LINE(14), - SWV_LINE(15), - SWV_LINE(16), - SWV_LINE(17), - SWV_LINE(18), - SWV_LINE(19), - SWV_LINE(20), - SWV_LINE(21), - 1500000, 1800000, +#define PF8XOO_SW1_6_VOLTAGE_NUM 0xB2 +static const struct linear_range pf8x00_sw1_to_6_voltages[] = { + REGULATOR_LINEAR_RANGE(400000, 0x00, 0xB0, 6250), + REGULATOR_LINEAR_RANGE(1800000, 0xB1, 0xB1, 0), }; /* Output: 1.0V to 4.1V */ @@ -194,15 +176,10 @@ static const int pf8x00_vsnvs_voltages[] = { 0, 1800000, 3000000, 3300000, }; -static struct pf8x00_regulator *desc_to_regulator(const struct regulator_desc *desc) -{ - return container_of(desc, struct pf8x00_regulator, desc); -} - -static void swxilim_select(const struct regulator_desc *desc, int ilim) +static void swxilim_select(struct pf8x00_chip *chip, int id, int ilim) { - struct pf8x00_regulator *data = desc_to_regulator(desc); u8 ilim_sel; + u8 reg = PF8X00_SW_BASE(id) + SW_CONFIG2; switch (ilim) { case 2100: @@ -222,43 +199,130 @@ static void swxilim_select(const struct regulator_desc *desc, int ilim) break; } - data->ilim = ilim_sel; + regmap_update_bits(chip->regmap, reg, + PF8X00_SWXILIM_MASK, + ilim_sel << PF8X00_SWXILIM_SHIFT); } -static int pf8x00_of_parse_cb(struct device_node *np, +static void handle_ilim_property(struct device_node *np, const struct regulator_desc *desc, struct regulator_config *config) { - struct pf8x00_regulator *data = desc_to_regulator(desc); struct pf8x00_chip *chip = config->driver_data; + int ret; + int val; + + if ((desc->id >= PF8X00_BUCK1) && (desc->id <= PF8X00_BUCK7)) { + ret = of_property_read_u32(np, "nxp,ilim-ma", &val); + if (ret) { + dev_dbg(chip->dev, "unspecified ilim for BUCK%d, use value stored in OTP\n", + desc->id - PF8X00_LDO4); + return; + } + + dev_warn(chip->dev, "nxp,ilim-ma is deprecated, please use regulator-max-microamp\n"); + swxilim_select(chip, desc->id, val); + + } else + dev_warn(chip->dev, "nxp,ilim-ma used with incorrect regulator (%d)\n", desc->id); +} + +static void handle_shift_property(struct device_node *np, + const struct regulator_desc *desc, + struct regulator_config *config) +{ + unsigned char id = desc->id - PF8X00_LDO4; + unsigned char reg = PF8X00_SW_BASE(id) + SW_CONFIG2; + struct pf8x00_chip *chip = config->driver_data; + int phase; int val; int ret; + if ((desc->id >= PF8X00_BUCK1) && (desc->id <= PF8X00_BUCK7)) { + ret = of_property_read_u32(np, "nxp,phase-shift", &val); + if (ret) { + dev_dbg(chip->dev, + "unspecified phase-shift for BUCK%d, using OTP configuration\n", + id); + return; + } - ret = of_property_read_u32(np, "nxp,ilim-ma", &val); - if (ret) - dev_dbg(chip->dev, "unspecified ilim for BUCK%d, use 2100 mA\n", - desc->id - PF8X00_LDO4); + if (val < 0 || val > 315 || val % 45 != 0) { + dev_warn(config->dev, + "invalid phase_shift %d for BUCK%d, using OTP configuration\n", + val, id); + return; + } - swxilim_select(desc, val); + phase = val / 45; - ret = of_property_read_u32(np, "nxp,phase-shift", &val); - if (ret) { - dev_dbg(chip->dev, - "unspecified phase-shift for BUCK%d, use 0 degrees\n", - desc->id - PF8X00_LDO4); - val = PF8X00_SWXPHASE_DEFAULT; + if (phase >= 1) + phase -= 1; + else + phase = PF8X00_SWXPHASE_SHIFT; + + regmap_update_bits(chip->regmap, reg, + PF8X00_SWXPHASE_MASK, + phase); + } else + dev_warn(chip->dev, "nxp,phase-shift used with incorrect regulator (%d)\n", id); + +} + +static int pf8x00_of_parse_cb(struct device_node *np, + const struct regulator_desc *desc, + struct regulator_config *config) +{ + + handle_ilim_property(np, desc, config); + handle_shift_property(np, desc, config); + + return 0; +} + +static int pf8x00_suspend_enable(struct regulator_dev *rdev) +{ + struct pf8x00_regulator_data *regl = rdev_get_drvdata(rdev); + struct regmap *rmap = rdev_get_regmap(rdev); + + return regmap_update_bits(rmap, regl->suspend_enable_reg, + regl->suspend_enable_mask, + regl->suspend_enable_mask); +} + +static int pf8x00_suspend_disable(struct regulator_dev *rdev) +{ + struct pf8x00_regulator_data *regl = rdev_get_drvdata(rdev); + struct regmap *rmap = rdev_get_regmap(rdev); + + return regmap_update_bits(rmap, regl->suspend_enable_reg, + regl->suspend_enable_mask, 0); +} + +static int pf8x00_set_suspend_voltage(struct regulator_dev *rdev, int uV) +{ + struct pf8x00_regulator_data *regl = rdev_get_drvdata(rdev); + int ret; + + if (regl->suspend_voltage_cache == uV) + return 0; + + ret = regulator_map_voltage_iterate(rdev, uV, uV); + if (ret < 0) { + dev_err(rdev_get_dev(rdev), "failed to map %i uV\n", uV); + return ret; } - phase = val / 45; - if ((phase * 45) != val) { - dev_warn(config->dev, - "invalid phase_shift %d for BUCK%d, use 0 degrees\n", - (phase * 45), desc->id - PF8X00_LDO4); - phase = PF8X00_SWXPHASE_SHIFT; + dev_dbg(rdev_get_dev(rdev), "uV: %i, reg: 0x%x, msk: 0x%x, val: 0x%x\n", + uV, regl->suspend_voltage_reg, regl->desc.vsel_mask, ret); + ret = regmap_update_bits(rdev->regmap, regl->suspend_voltage_reg, + regl->desc.vsel_mask, ret); + if (ret < 0) { + dev_err(rdev_get_dev(rdev), "failed to set %i uV\n", uV); + return ret; } - data->phase_shift = (phase >= 1) ? phase - 1 : PF8X00_SWXPHASE_SHIFT; + regl->suspend_voltage_cache = uV; return 0; } @@ -270,15 +334,37 @@ static const struct regulator_ops pf8x00_ldo_ops = { .list_voltage = regulator_list_voltage_table, .set_voltage_sel = regulator_set_voltage_sel_regmap, .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_suspend_enable = pf8x00_suspend_enable, + .set_suspend_disable = pf8x00_suspend_disable, + .set_suspend_voltage = pf8x00_set_suspend_voltage, +}; + + +static const struct regulator_ops pf8x00_buck1_6_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .list_voltage = regulator_list_voltage_linear_range, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .get_current_limit = regulator_get_current_limit_regmap, + .set_current_limit = regulator_set_current_limit_regmap, + .set_suspend_enable = pf8x00_suspend_enable, + .set_suspend_disable = pf8x00_suspend_disable, + .set_suspend_voltage = pf8x00_set_suspend_voltage, }; -static const struct regulator_ops pf8x00_buck_ops = { +static const struct regulator_ops pf8x00_buck7_ops = { .enable = regulator_enable_regmap, .disable = regulator_disable_regmap, .is_enabled = regulator_is_enabled_regmap, .list_voltage = regulator_list_voltage_table, .set_voltage_sel = regulator_set_voltage_sel_regmap, .get_voltage_sel = regulator_get_voltage_sel_regmap, + .get_current_limit = regulator_get_current_limit_regmap, + .set_current_limit = regulator_set_current_limit_regmap, + .set_suspend_enable = pf8x00_suspend_enable, + .set_suspend_disable = pf8x00_suspend_disable, }; static const struct regulator_ops pf8x00_vsnvs_ops = { @@ -310,6 +396,9 @@ static const struct regulator_ops pf8x00_vsnvs_ops = { .disable_val = 0x0, \ .enable_mask = 2, \ }, \ + .suspend_enable_reg = (base) + LDO_CONFIG2, \ + .suspend_enable_mask = 1, \ + .suspend_voltage_reg = (base) + LDO_STBY_VOLT, \ } #define PF8X00BUCK(_id, _name, base, voltages) \ @@ -319,14 +408,54 @@ static const struct regulator_ops pf8x00_vsnvs_ops = { .of_match = _name, \ .regulators_node = "regulators", \ .of_parse_cb = pf8x00_of_parse_cb, \ - .n_voltages = ARRAY_SIZE(voltages), \ - .ops = &pf8x00_buck_ops, \ + .n_voltages = PF8XOO_SW1_6_VOLTAGE_NUM, \ + .ops = &pf8x00_buck1_6_ops, \ .type = REGULATOR_VOLTAGE, \ .id = PF8X00_BUCK ## _id, \ .owner = THIS_MODULE, \ + .ramp_delay = 19000, \ + .linear_ranges = pf8x00_sw1_to_6_voltages, \ + .n_linear_ranges = \ + ARRAY_SIZE(pf8x00_sw1_to_6_voltages), \ + .vsel_reg = (base) + SW_RUN_VOLT, \ + .vsel_mask = 0xff, \ + .curr_table = pf8x00_sw_current_table, \ + .n_current_limits = \ + ARRAY_SIZE(pf8x00_sw_current_table), \ + .csel_reg = (base) + SW_CONFIG2, \ + .csel_mask = PF8X00_SWXILIM_MASK, \ + .enable_reg = (base) + SW_MODE1, \ + .enable_val = 0x3, \ + .disable_val = 0x0, \ + .enable_mask = 0x3, \ + .enable_time = 500, \ + }, \ + .suspend_enable_reg = (base) + SW_MODE1, \ + .suspend_enable_mask = 0xc, \ + .suspend_voltage_reg = (base) + SW_STBY_VOLT, \ + } + +#define PF8X00BUCK7(_name, base, voltages) \ + [PF8X00_BUCK7] = { \ + .desc = { \ + .name = _name, \ + .of_match = _name, \ + .regulators_node = "regulators", \ + .of_parse_cb = pf8x00_of_parse_cb, \ + .n_voltages = ARRAY_SIZE(voltages), \ + .ops = &pf8x00_buck7_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = PF8X00_BUCK7, \ + .owner = THIS_MODULE, \ + .ramp_delay = 19000, \ .volt_table = voltages, \ .vsel_reg = (base) + SW_RUN_VOLT, \ .vsel_mask = 0xff, \ + .curr_table = pf8x00_sw_current_table, \ + .n_current_limits = \ + ARRAY_SIZE(pf8x00_sw_current_table), \ + .csel_reg = (base) + SW_CONFIG2, \ + .csel_mask = PF8X00_SWXILIM_MASK, \ .enable_reg = (base) + SW_MODE1, \ .enable_val = 0x3, \ .disable_val = 0x0, \ @@ -335,6 +464,7 @@ static const struct regulator_ops pf8x00_vsnvs_ops = { }, \ } + #define PF8X00VSNVS(_name, base, voltages) \ [PF8X00_VSNVS] = { \ .desc = { \ @@ -352,7 +482,7 @@ static const struct regulator_ops pf8x00_vsnvs_ops = { }, \ } -static struct pf8x00_regulator pf8x00_regulators_data[PF8X00_MAX_REGULATORS] = { +static struct pf8x00_regulator_data pf8x00_regs_data[PF8X00_MAX_REGULATORS] = { PF8X00LDO(1, "ldo1", PF8X00_LDO_BASE(PF8X00_LDO1), pf8x00_ldo_voltages), PF8X00LDO(2, "ldo2", PF8X00_LDO_BASE(PF8X00_LDO2), pf8x00_ldo_voltages), PF8X00LDO(3, "ldo3", PF8X00_LDO_BASE(PF8X00_LDO3), pf8x00_ldo_voltages), @@ -363,7 +493,7 @@ static struct pf8x00_regulator pf8x00_regulators_data[PF8X00_MAX_REGULATORS] = { PF8X00BUCK(4, "buck4", PF8X00_SW_BASE(PF8X00_BUCK4), pf8x00_sw1_to_6_voltages), PF8X00BUCK(5, "buck5", PF8X00_SW_BASE(PF8X00_BUCK5), pf8x00_sw1_to_6_voltages), PF8X00BUCK(6, "buck6", PF8X00_SW_BASE(PF8X00_BUCK6), pf8x00_sw1_to_6_voltages), - PF8X00BUCK(7, "buck7", PF8X00_SW_BASE(PF8X00_BUCK7), pf8x00_sw7_voltages), + PF8X00BUCK7("buck7", PF8X00_SW_BASE(PF8X00_BUCK7), pf8x00_sw7_voltages), PF8X00VSNVS("vsnvs", PF8X00_VSNVS_CONFIG1, pf8x00_vsnvs_voltages), }; @@ -437,12 +567,12 @@ static int pf8x00_i2c_probe(struct i2c_client *client) if (ret) return ret; - for (id = 0; id < ARRAY_SIZE(pf8x00_regulators_data); id++) { - struct pf8x00_regulator *data = &pf8x00_regulators_data[id]; + for (id = 0; id < ARRAY_SIZE(pf8x00_regs_data); id++) { + struct pf8x00_regulator_data *data = &pf8x00_regs_data[id]; struct regulator_dev *rdev; config.dev = chip->dev; - config.driver_data = chip; + config.driver_data = data; config.regmap = chip->regmap; rdev = devm_regulator_register(&client->dev, &data->desc, &config); @@ -451,18 +581,6 @@ static int pf8x00_i2c_probe(struct i2c_client *client) "failed to register %s regulator\n", data->desc.name); return PTR_ERR(rdev); } - - if ((id >= PF8X00_BUCK1) && (id <= PF8X00_BUCK7)) { - u8 reg = PF8X00_SW_BASE(id) + SW_CONFIG2; - - regmap_update_bits(chip->regmap, reg, - PF8X00_SWXPHASE_MASK, - data->phase_shift); - - regmap_update_bits(chip->regmap, reg, - PF8X00_SWXILIM_MASK, - data->ilim << PF8X00_SWXILIM_SHIFT); - } } return 0; diff --git a/drivers/regulator/qcom-labibb-regulator.c b/drivers/regulator/qcom-labibb-regulator.c index 8ccf572394a2..de25e3279b4b 100644 --- a/drivers/regulator/qcom-labibb-regulator.c +++ b/drivers/regulator/qcom-labibb-regulator.c @@ -17,11 +17,48 @@ #define PMI8998_LAB_REG_BASE 0xde00 #define PMI8998_IBB_REG_BASE 0xdc00 +#define PMI8998_IBB_LAB_REG_OFFSET 0x200 #define REG_LABIBB_STATUS1 0x08 + #define LABIBB_STATUS1_SC_BIT BIT(6) + #define LABIBB_STATUS1_VREG_OK_BIT BIT(7) + +#define REG_LABIBB_INT_SET_TYPE 0x11 +#define REG_LABIBB_INT_POLARITY_HIGH 0x12 +#define REG_LABIBB_INT_POLARITY_LOW 0x13 +#define REG_LABIBB_INT_LATCHED_CLR 0x14 +#define REG_LABIBB_INT_EN_SET 0x15 +#define REG_LABIBB_INT_EN_CLR 0x16 + #define LABIBB_INT_VREG_OK BIT(0) + #define LABIBB_INT_VREG_TYPE_LEVEL 0 + +#define REG_LABIBB_VOLTAGE 0x41 + #define LABIBB_VOLTAGE_OVERRIDE_EN BIT(7) + #define LAB_VOLTAGE_SET_MASK GENMASK(3, 0) + #define IBB_VOLTAGE_SET_MASK GENMASK(5, 0) + #define REG_LABIBB_ENABLE_CTL 0x46 -#define LABIBB_STATUS1_VREG_OK_BIT BIT(7) -#define LABIBB_CONTROL_ENABLE BIT(7) + #define LABIBB_CONTROL_ENABLE BIT(7) + +#define REG_LABIBB_PD_CTL 0x47 + #define LAB_PD_CTL_MASK GENMASK(1, 0) + #define IBB_PD_CTL_MASK (BIT(0) | BIT(7)) + #define LAB_PD_CTL_STRONG_PULL BIT(0) + #define IBB_PD_CTL_HALF_STRENGTH BIT(0) + #define IBB_PD_CTL_EN BIT(7) + +#define REG_LABIBB_CURRENT_LIMIT 0x4b + #define LAB_CURRENT_LIMIT_MASK GENMASK(2, 0) + #define IBB_CURRENT_LIMIT_MASK GENMASK(4, 0) + #define LAB_CURRENT_LIMIT_OVERRIDE_EN BIT(3) + #define LABIBB_CURRENT_LIMIT_EN BIT(7) + +#define REG_IBB_PWRUP_PWRDN_CTL_1 0x58 + #define IBB_CTL_1_DISCHARGE_EN BIT(2) + +#define REG_LABIBB_SOFT_START_CTL 0x5f +#define REG_LABIBB_SEC_ACCESS 0xd0 + #define LABIBB_SEC_UNLOCK_CODE 0xa5 #define LAB_ENABLE_CTL_MASK BIT(7) #define IBB_ENABLE_CTL_MASK (BIT(7) | BIT(6)) @@ -30,14 +67,35 @@ #define LAB_ENABLE_TIME (LABIBB_OFF_ON_DELAY * 2) #define IBB_ENABLE_TIME (LABIBB_OFF_ON_DELAY * 10) #define LABIBB_POLL_ENABLED_TIME 1000 +#define OCP_RECOVERY_INTERVAL_MS 500 +#define SC_RECOVERY_INTERVAL_MS 250 +#define LABIBB_MAX_OCP_COUNT 4 +#define LABIBB_MAX_SC_COUNT 3 +#define LABIBB_MAX_FATAL_COUNT 2 + +struct labibb_current_limits { + u32 uA_min; + u32 uA_step; + u8 ovr_val; +}; struct labibb_regulator { struct regulator_desc desc; struct device *dev; struct regmap *regmap; struct regulator_dev *rdev; + struct labibb_current_limits uA_limits; + struct delayed_work ocp_recovery_work; + struct delayed_work sc_recovery_work; u16 base; u8 type; + u8 dischg_sel; + u8 soft_start_sel; + int sc_irq; + int sc_count; + int ocp_irq; + int ocp_irq_count; + int fatal_count; }; struct labibb_regulator_data { @@ -47,10 +105,579 @@ struct labibb_regulator_data { const struct regulator_desc *desc; }; +static int qcom_labibb_ocp_hw_enable(struct regulator_dev *rdev) +{ + struct labibb_regulator *vreg = rdev_get_drvdata(rdev); + int ret; + + /* Clear irq latch status to avoid spurious event */ + ret = regmap_update_bits(rdev->regmap, + vreg->base + REG_LABIBB_INT_LATCHED_CLR, + LABIBB_INT_VREG_OK, 1); + if (ret) + return ret; + + /* Enable OCP HW interrupt */ + return regmap_update_bits(rdev->regmap, + vreg->base + REG_LABIBB_INT_EN_SET, + LABIBB_INT_VREG_OK, 1); +} + +static int qcom_labibb_ocp_hw_disable(struct regulator_dev *rdev) +{ + struct labibb_regulator *vreg = rdev_get_drvdata(rdev); + + return regmap_update_bits(rdev->regmap, + vreg->base + REG_LABIBB_INT_EN_CLR, + LABIBB_INT_VREG_OK, 1); +} + +/** + * qcom_labibb_check_ocp_status - Check the Over-Current Protection status + * @vreg: Main driver structure + * + * This function checks the STATUS1 register for the VREG_OK bit: if it is + * set, then there is no Over-Current event. + * + * Returns: Zero if there is no over-current, 1 if in over-current or + * negative number for error + */ +static int qcom_labibb_check_ocp_status(struct labibb_regulator *vreg) +{ + u32 cur_status; + int ret; + + ret = regmap_read(vreg->rdev->regmap, vreg->base + REG_LABIBB_STATUS1, + &cur_status); + if (ret) + return ret; + + return !(cur_status & LABIBB_STATUS1_VREG_OK_BIT); +} + +/** + * qcom_labibb_ocp_recovery_worker - Handle OCP event + * @work: OCP work structure + * + * This is the worker function to handle the Over Current Protection + * hardware event; This will check if the hardware is still + * signaling an over-current condition and will eventually stop + * the regulator if such condition is still signaled after + * LABIBB_MAX_OCP_COUNT times. + * + * If the driver that is consuming the regulator did not take action + * for the OCP condition, or the hardware did not stabilize, a cut + * of the LAB and IBB regulators will be forced (regulators will be + * disabled). + * + * As last, if the writes to shut down the LAB/IBB regulators fail + * for more than LABIBB_MAX_FATAL_COUNT, then a kernel panic will be + * triggered, as a last resort to protect the hardware from burning; + * this, however, is expected to never happen, but this is kept to + * try to further ensure that we protect the hardware at all costs. + */ +static void qcom_labibb_ocp_recovery_worker(struct work_struct *work) +{ + struct labibb_regulator *vreg; + const struct regulator_ops *ops; + int ret; + + vreg = container_of(work, struct labibb_regulator, + ocp_recovery_work.work); + ops = vreg->rdev->desc->ops; + + if (vreg->ocp_irq_count >= LABIBB_MAX_OCP_COUNT) { + /* + * If we tried to disable the regulator multiple times but + * we kept failing, there's only one last hope to save our + * hardware from the death: raise a kernel bug, reboot and + * hope that the bootloader kindly saves us. This, though + * is done only as paranoid checking, because failing the + * regmap write to disable the vreg is almost impossible, + * since we got here after multiple regmap R/W. + */ + BUG_ON(vreg->fatal_count > LABIBB_MAX_FATAL_COUNT); + dev_err(&vreg->rdev->dev, "LABIBB: CRITICAL: Disabling regulator\n"); + + /* Disable the regulator immediately to avoid damage */ + ret = ops->disable(vreg->rdev); + if (ret) { + vreg->fatal_count++; + goto reschedule; + } + enable_irq(vreg->ocp_irq); + vreg->fatal_count = 0; + return; + } + + ret = qcom_labibb_check_ocp_status(vreg); + if (ret != 0) { + vreg->ocp_irq_count++; + goto reschedule; + } + + ret = qcom_labibb_ocp_hw_enable(vreg->rdev); + if (ret) { + /* We cannot trust it without OCP enabled. */ + dev_err(vreg->dev, "Cannot enable OCP IRQ\n"); + vreg->ocp_irq_count++; + goto reschedule; + } + + enable_irq(vreg->ocp_irq); + /* Everything went fine: reset the OCP count! */ + vreg->ocp_irq_count = 0; + return; + +reschedule: + mod_delayed_work(system_wq, &vreg->ocp_recovery_work, + msecs_to_jiffies(OCP_RECOVERY_INTERVAL_MS)); +} + +/** + * qcom_labibb_ocp_isr - Interrupt routine for OverCurrent Protection + * @irq: Interrupt number + * @chip: Main driver structure + * + * Over Current Protection (OCP) will signal to the client driver + * that an over-current event has happened and then will schedule + * a recovery worker. + * + * Disabling and eventually re-enabling the regulator is expected + * to be done by the driver, as some hardware may be triggering an + * over-current condition only at first initialization or it may + * be expected only for a very brief amount of time, after which + * the attached hardware may be expected to stabilize its current + * draw. + * + * Returns: IRQ_HANDLED for success or IRQ_NONE for failure. + */ +static irqreturn_t qcom_labibb_ocp_isr(int irq, void *chip) +{ + struct labibb_regulator *vreg = chip; + const struct regulator_ops *ops = vreg->rdev->desc->ops; + int ret; + + /* If the regulator is not enabled, this is a fake event */ + if (!ops->is_enabled(vreg->rdev)) + return 0; + + /* If we tried to recover for too many times it's not getting better */ + if (vreg->ocp_irq_count > LABIBB_MAX_OCP_COUNT) + return IRQ_NONE; + + /* + * If we (unlikely) can't read this register, to prevent hardware + * damage at all costs, we assume that the overcurrent event was + * real; Moreover, if the status register is not signaling OCP, + * it was a spurious event, so it's all ok. + */ + ret = qcom_labibb_check_ocp_status(vreg); + if (ret == 0) { + vreg->ocp_irq_count = 0; + goto end; + } + vreg->ocp_irq_count++; + + /* + * Disable the interrupt temporarily, or it will fire continuously; + * we will re-enable it in the recovery worker function. + */ + disable_irq_nosync(irq); + + /* Warn the user for overcurrent */ + dev_warn(vreg->dev, "Over-Current interrupt fired!\n"); + + /* Disable the interrupt to avoid hogging */ + ret = qcom_labibb_ocp_hw_disable(vreg->rdev); + if (ret) + goto end; + + /* Signal overcurrent event to drivers */ + regulator_notifier_call_chain(vreg->rdev, + REGULATOR_EVENT_OVER_CURRENT, NULL); + +end: + /* Schedule the recovery work */ + schedule_delayed_work(&vreg->ocp_recovery_work, + msecs_to_jiffies(OCP_RECOVERY_INTERVAL_MS)); + if (ret) + return IRQ_NONE; + + return IRQ_HANDLED; +} + +static int qcom_labibb_set_ocp(struct regulator_dev *rdev) +{ + struct labibb_regulator *vreg = rdev_get_drvdata(rdev); + char *ocp_irq_name; + u32 irq_flags = IRQF_ONESHOT; + int irq_trig_low, ret; + + /* If there is no OCP interrupt, there's nothing to set */ + if (vreg->ocp_irq <= 0) + return -EINVAL; + + ocp_irq_name = devm_kasprintf(vreg->dev, GFP_KERNEL, "%s-over-current", + vreg->desc.name); + if (!ocp_irq_name) + return -ENOMEM; + + /* IRQ polarities - LAB: trigger-low, IBB: trigger-high */ + switch (vreg->type) { + case QCOM_LAB_TYPE: + irq_flags |= IRQF_TRIGGER_LOW; + irq_trig_low = 1; + break; + case QCOM_IBB_TYPE: + irq_flags |= IRQF_TRIGGER_HIGH; + irq_trig_low = 0; + break; + default: + return -EINVAL; + } + + /* Activate OCP HW level interrupt */ + ret = regmap_update_bits(rdev->regmap, + vreg->base + REG_LABIBB_INT_SET_TYPE, + LABIBB_INT_VREG_OK, + LABIBB_INT_VREG_TYPE_LEVEL); + if (ret) + return ret; + + /* Set OCP interrupt polarity */ + ret = regmap_update_bits(rdev->regmap, + vreg->base + REG_LABIBB_INT_POLARITY_HIGH, + LABIBB_INT_VREG_OK, !irq_trig_low); + if (ret) + return ret; + ret = regmap_update_bits(rdev->regmap, + vreg->base + REG_LABIBB_INT_POLARITY_LOW, + LABIBB_INT_VREG_OK, irq_trig_low); + if (ret) + return ret; + + ret = qcom_labibb_ocp_hw_enable(rdev); + if (ret) + return ret; + + return devm_request_threaded_irq(vreg->dev, vreg->ocp_irq, NULL, + qcom_labibb_ocp_isr, irq_flags, + ocp_irq_name, vreg); +} + +/** + * qcom_labibb_check_sc_status - Check the Short Circuit Protection status + * @vreg: Main driver structure + * + * This function checks the STATUS1 register on both LAB and IBB regulators + * for the ShortCircuit bit: if it is set on *any* of them, then we have + * experienced a short-circuit event. + * + * Returns: Zero if there is no short-circuit, 1 if in short-circuit or + * negative number for error + */ +static int qcom_labibb_check_sc_status(struct labibb_regulator *vreg) +{ + u32 ibb_status, ibb_reg, lab_status, lab_reg; + int ret; + + /* We have to work on both regulators due to PBS... */ + lab_reg = ibb_reg = vreg->base + REG_LABIBB_STATUS1; + if (vreg->type == QCOM_LAB_TYPE) + ibb_reg -= PMI8998_IBB_LAB_REG_OFFSET; + else + lab_reg += PMI8998_IBB_LAB_REG_OFFSET; + + ret = regmap_read(vreg->rdev->regmap, lab_reg, &lab_status); + if (ret) + return ret; + ret = regmap_read(vreg->rdev->regmap, ibb_reg, &ibb_status); + if (ret) + return ret; + + return !!(lab_status & LABIBB_STATUS1_SC_BIT) || + !!(ibb_status & LABIBB_STATUS1_SC_BIT); +} + +/** + * qcom_labibb_sc_recovery_worker - Handle Short Circuit event + * @work: SC work structure + * + * This is the worker function to handle the Short Circuit Protection + * hardware event; This will check if the hardware is still + * signaling a short-circuit condition and will eventually never + * re-enable the regulator if such condition is still signaled after + * LABIBB_MAX_SC_COUNT times. + * + * If the driver that is consuming the regulator did not take action + * for the SC condition, or the hardware did not stabilize, this + * worker will stop rescheduling, leaving the regulators disabled + * as already done by the Portable Batch System (PBS). + * + * Returns: IRQ_HANDLED for success or IRQ_NONE for failure. + */ +static void qcom_labibb_sc_recovery_worker(struct work_struct *work) +{ + struct labibb_regulator *vreg; + const struct regulator_ops *ops; + u32 lab_reg, ibb_reg, lab_val, ibb_val, val; + bool pbs_cut = false; + int i, sc, ret; + + vreg = container_of(work, struct labibb_regulator, + sc_recovery_work.work); + ops = vreg->rdev->desc->ops; + + /* + * If we tried to check the regulator status multiple times but we + * kept failing, then just bail out, as the Portable Batch System + * (PBS) will disable the vregs for us, preventing hardware damage. + */ + if (vreg->fatal_count > LABIBB_MAX_FATAL_COUNT) + return; + + /* Too many short-circuit events. Throw in the towel. */ + if (vreg->sc_count > LABIBB_MAX_SC_COUNT) + return; + + /* + * The Portable Batch System (PBS) automatically disables LAB + * and IBB when a short-circuit event is detected, so we have to + * check and work on both of them at the same time. + */ + lab_reg = ibb_reg = vreg->base + REG_LABIBB_ENABLE_CTL; + if (vreg->type == QCOM_LAB_TYPE) + ibb_reg -= PMI8998_IBB_LAB_REG_OFFSET; + else + lab_reg += PMI8998_IBB_LAB_REG_OFFSET; + + sc = qcom_labibb_check_sc_status(vreg); + if (sc) + goto reschedule; + + for (i = 0; i < LABIBB_MAX_SC_COUNT; i++) { + ret = regmap_read(vreg->regmap, lab_reg, &lab_val); + if (ret) { + vreg->fatal_count++; + goto reschedule; + } + + ret = regmap_read(vreg->regmap, ibb_reg, &ibb_val); + if (ret) { + vreg->fatal_count++; + goto reschedule; + } + val = lab_val & ibb_val; + + if (!(val & LABIBB_CONTROL_ENABLE)) { + pbs_cut = true; + break; + } + usleep_range(5000, 6000); + } + if (pbs_cut) + goto reschedule; + + + /* + * If we have reached this point, we either have successfully + * recovered from the SC condition or we had a spurious SC IRQ, + * which means that we can re-enable the regulators, if they + * have ever been disabled by the PBS. + */ + ret = ops->enable(vreg->rdev); + if (ret) + goto reschedule; + + /* Everything went fine: reset the OCP count! */ + vreg->sc_count = 0; + enable_irq(vreg->sc_irq); + return; + +reschedule: + /* + * Now that we have done basic handling of the short-circuit, + * reschedule this worker in the regular system workqueue, as + * taking action is not truly urgent anymore. + */ + vreg->sc_count++; + mod_delayed_work(system_wq, &vreg->sc_recovery_work, + msecs_to_jiffies(SC_RECOVERY_INTERVAL_MS)); +} + +/** + * qcom_labibb_sc_isr - Interrupt routine for Short Circuit Protection + * @irq: Interrupt number + * @chip: Main driver structure + * + * Short Circuit Protection (SCP) will signal to the client driver + * that a regulation-out event has happened and then will schedule + * a recovery worker. + * + * The LAB and IBB regulators will be automatically disabled by the + * Portable Batch System (PBS) and they will be enabled again by + * the worker function if the hardware stops signaling the short + * circuit event. + * + * Returns: IRQ_HANDLED for success or IRQ_NONE for failure. + */ +static irqreturn_t qcom_labibb_sc_isr(int irq, void *chip) +{ + struct labibb_regulator *vreg = chip; + + if (vreg->sc_count > LABIBB_MAX_SC_COUNT) + return IRQ_NONE; + + /* Warn the user for short circuit */ + dev_warn(vreg->dev, "Short-Circuit interrupt fired!\n"); + + /* + * Disable the interrupt temporarily, or it will fire continuously; + * we will re-enable it in the recovery worker function. + */ + disable_irq_nosync(irq); + + /* Signal out of regulation event to drivers */ + regulator_notifier_call_chain(vreg->rdev, + REGULATOR_EVENT_REGULATION_OUT, NULL); + + /* Schedule the short-circuit handling as high-priority work */ + mod_delayed_work(system_highpri_wq, &vreg->sc_recovery_work, + msecs_to_jiffies(SC_RECOVERY_INTERVAL_MS)); + return IRQ_HANDLED; +} + + +static int qcom_labibb_set_current_limit(struct regulator_dev *rdev, + int min_uA, int max_uA) +{ + struct labibb_regulator *vreg = rdev_get_drvdata(rdev); + struct regulator_desc *desc = &vreg->desc; + struct labibb_current_limits *lim = &vreg->uA_limits; + u32 mask, val; + int i, ret, sel = -1; + + if (min_uA < lim->uA_min || max_uA < lim->uA_min) + return -EINVAL; + + for (i = 0; i < desc->n_current_limits; i++) { + int uA_limit = (lim->uA_step * i) + lim->uA_min; + + if (max_uA >= uA_limit && min_uA <= uA_limit) + sel = i; + } + if (sel < 0) + return -EINVAL; + + /* Current limit setting needs secure access */ + ret = regmap_write(vreg->regmap, vreg->base + REG_LABIBB_SEC_ACCESS, + LABIBB_SEC_UNLOCK_CODE); + if (ret) + return ret; + + mask = desc->csel_mask | lim->ovr_val; + mask |= LABIBB_CURRENT_LIMIT_EN; + val = (u32)sel | lim->ovr_val; + val |= LABIBB_CURRENT_LIMIT_EN; + + return regmap_update_bits(vreg->regmap, desc->csel_reg, mask, val); +} + +static int qcom_labibb_get_current_limit(struct regulator_dev *rdev) +{ + struct labibb_regulator *vreg = rdev_get_drvdata(rdev); + struct regulator_desc *desc = &vreg->desc; + struct labibb_current_limits *lim = &vreg->uA_limits; + unsigned int cur_step; + int ret; + + ret = regmap_read(vreg->regmap, desc->csel_reg, &cur_step); + if (ret) + return ret; + cur_step &= desc->csel_mask; + + return (cur_step * lim->uA_step) + lim->uA_min; +} + +static int qcom_labibb_set_soft_start(struct regulator_dev *rdev) +{ + struct labibb_regulator *vreg = rdev_get_drvdata(rdev); + u32 val = 0; + + if (vreg->type == QCOM_IBB_TYPE) + val = vreg->dischg_sel; + else + val = vreg->soft_start_sel; + + return regmap_write(rdev->regmap, rdev->desc->soft_start_reg, val); +} + +static int qcom_labibb_get_table_sel(const int *table, int sz, u32 value) +{ + int i; + + for (i = 0; i < sz; i++) + if (table[i] == value) + return i; + return -EINVAL; +} + +/* IBB discharge resistor values in KOhms */ +static const int dischg_resistor_values[] = { 300, 64, 32, 16 }; + +/* Soft start time in microseconds */ +static const int soft_start_values[] = { 200, 400, 600, 800 }; + +static int qcom_labibb_of_parse_cb(struct device_node *np, + const struct regulator_desc *desc, + struct regulator_config *config) +{ + struct labibb_regulator *vreg = config->driver_data; + u32 dischg_kohms, soft_start_time; + int ret; + + ret = of_property_read_u32(np, "qcom,discharge-resistor-kohms", + &dischg_kohms); + if (ret) + dischg_kohms = 300; + + ret = qcom_labibb_get_table_sel(dischg_resistor_values, + ARRAY_SIZE(dischg_resistor_values), + dischg_kohms); + if (ret < 0) + return ret; + vreg->dischg_sel = (u8)ret; + + ret = of_property_read_u32(np, "qcom,soft-start-us", + &soft_start_time); + if (ret) + soft_start_time = 200; + + ret = qcom_labibb_get_table_sel(soft_start_values, + ARRAY_SIZE(soft_start_values), + soft_start_time); + if (ret < 0) + return ret; + vreg->soft_start_sel = (u8)ret; + + return 0; +} + static const struct regulator_ops qcom_labibb_ops = { .enable = regulator_enable_regmap, .disable = regulator_disable_regmap, .is_enabled = regulator_is_enabled_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .list_voltage = regulator_list_voltage_linear, + .map_voltage = regulator_map_voltage_linear, + .set_active_discharge = regulator_set_active_discharge_regmap, + .set_pull_down = regulator_set_pull_down_regmap, + .set_current_limit = qcom_labibb_set_current_limit, + .get_current_limit = qcom_labibb_get_current_limit, + .set_soft_start = qcom_labibb_set_soft_start, + .set_over_current_protection = qcom_labibb_set_ocp, }; static const struct regulator_desc pmi8998_lab_desc = { @@ -59,10 +686,25 @@ static const struct regulator_desc pmi8998_lab_desc = { .enable_val = LABIBB_CONTROL_ENABLE, .enable_time = LAB_ENABLE_TIME, .poll_enabled_time = LABIBB_POLL_ENABLED_TIME, + .soft_start_reg = (PMI8998_LAB_REG_BASE + REG_LABIBB_SOFT_START_CTL), + .pull_down_reg = (PMI8998_LAB_REG_BASE + REG_LABIBB_PD_CTL), + .pull_down_mask = LAB_PD_CTL_MASK, + .pull_down_val_on = LAB_PD_CTL_STRONG_PULL, + .vsel_reg = (PMI8998_LAB_REG_BASE + REG_LABIBB_VOLTAGE), + .vsel_mask = LAB_VOLTAGE_SET_MASK, + .apply_reg = (PMI8998_LAB_REG_BASE + REG_LABIBB_VOLTAGE), + .apply_bit = LABIBB_VOLTAGE_OVERRIDE_EN, + .csel_reg = (PMI8998_LAB_REG_BASE + REG_LABIBB_CURRENT_LIMIT), + .csel_mask = LAB_CURRENT_LIMIT_MASK, + .n_current_limits = 8, .off_on_delay = LABIBB_OFF_ON_DELAY, .owner = THIS_MODULE, .type = REGULATOR_VOLTAGE, + .min_uV = 4600000, + .uV_step = 100000, + .n_voltages = 16, .ops = &qcom_labibb_ops, + .of_parse_cb = qcom_labibb_of_parse_cb, }; static const struct regulator_desc pmi8998_ibb_desc = { @@ -71,10 +713,29 @@ static const struct regulator_desc pmi8998_ibb_desc = { .enable_val = LABIBB_CONTROL_ENABLE, .enable_time = IBB_ENABLE_TIME, .poll_enabled_time = LABIBB_POLL_ENABLED_TIME, + .soft_start_reg = (PMI8998_IBB_REG_BASE + REG_LABIBB_SOFT_START_CTL), + .active_discharge_off = 0, + .active_discharge_on = IBB_CTL_1_DISCHARGE_EN, + .active_discharge_mask = IBB_CTL_1_DISCHARGE_EN, + .active_discharge_reg = (PMI8998_IBB_REG_BASE + REG_IBB_PWRUP_PWRDN_CTL_1), + .pull_down_reg = (PMI8998_IBB_REG_BASE + REG_LABIBB_PD_CTL), + .pull_down_mask = IBB_PD_CTL_MASK, + .pull_down_val_on = IBB_PD_CTL_HALF_STRENGTH | IBB_PD_CTL_EN, + .vsel_reg = (PMI8998_IBB_REG_BASE + REG_LABIBB_VOLTAGE), + .vsel_mask = IBB_VOLTAGE_SET_MASK, + .apply_reg = (PMI8998_IBB_REG_BASE + REG_LABIBB_VOLTAGE), + .apply_bit = LABIBB_VOLTAGE_OVERRIDE_EN, + .csel_reg = (PMI8998_IBB_REG_BASE + REG_LABIBB_CURRENT_LIMIT), + .csel_mask = IBB_CURRENT_LIMIT_MASK, + .n_current_limits = 32, .off_on_delay = LABIBB_OFF_ON_DELAY, .owner = THIS_MODULE, .type = REGULATOR_VOLTAGE, + .min_uV = 1400000, + .uV_step = 100000, + .n_voltages = 64, .ops = &qcom_labibb_ops, + .of_parse_cb = qcom_labibb_of_parse_cb, }; static const struct labibb_regulator_data pmi8998_labibb_data[] = { @@ -94,7 +755,7 @@ static int qcom_labibb_regulator_probe(struct platform_device *pdev) struct labibb_regulator *vreg; struct device *dev = &pdev->dev; struct regulator_config cfg = {}; - + struct device_node *reg_node; const struct of_device_id *match; const struct labibb_regulator_data *reg_data; struct regmap *reg_regmap; @@ -112,6 +773,8 @@ static int qcom_labibb_regulator_probe(struct platform_device *pdev) return -ENODEV; for (reg_data = match->data; reg_data->name; reg_data++) { + char *sc_irq_name; + int irq = 0; /* Validate if the type of regulator is indeed * what's mentioned in DT. @@ -134,10 +797,61 @@ static int qcom_labibb_regulator_probe(struct platform_device *pdev) if (!vreg) return -ENOMEM; + sc_irq_name = devm_kasprintf(dev, GFP_KERNEL, + "%s-short-circuit", + reg_data->name); + if (!sc_irq_name) + return -ENOMEM; + + reg_node = of_get_child_by_name(pdev->dev.of_node, + reg_data->name); + if (!reg_node) + return -EINVAL; + + /* The Short Circuit interrupt is critical */ + irq = of_irq_get_byname(reg_node, "sc-err"); + if (irq <= 0) { + if (irq == 0) + irq = -EINVAL; + + return dev_err_probe(vreg->dev, irq, + "Short-circuit irq not found.\n"); + } + vreg->sc_irq = irq; + + /* OverCurrent Protection IRQ is optional */ + irq = of_irq_get_byname(reg_node, "ocp"); + vreg->ocp_irq = irq; + vreg->ocp_irq_count = 0; + of_node_put(reg_node); + vreg->regmap = reg_regmap; vreg->dev = dev; vreg->base = reg_data->base; vreg->type = reg_data->type; + INIT_DELAYED_WORK(&vreg->sc_recovery_work, + qcom_labibb_sc_recovery_worker); + + if (vreg->ocp_irq > 0) + INIT_DELAYED_WORK(&vreg->ocp_recovery_work, + qcom_labibb_ocp_recovery_worker); + + switch (vreg->type) { + case QCOM_LAB_TYPE: + /* LAB Limits: 200-1600mA */ + vreg->uA_limits.uA_min = 200000; + vreg->uA_limits.uA_step = 200000; + vreg->uA_limits.ovr_val = LAB_CURRENT_LIMIT_OVERRIDE_EN; + break; + case QCOM_IBB_TYPE: + /* IBB Limits: 0-1550mA */ + vreg->uA_limits.uA_min = 0; + vreg->uA_limits.uA_step = 50000; + vreg->uA_limits.ovr_val = 0; /* No override bit */ + break; + default: + return -EINVAL; + } memcpy(&vreg->desc, reg_data->desc, sizeof(vreg->desc)); vreg->desc.of_match = reg_data->name; @@ -155,6 +869,14 @@ static int qcom_labibb_regulator_probe(struct platform_device *pdev) reg_data->name, ret); return PTR_ERR(vreg->rdev); } + + ret = devm_request_threaded_irq(vreg->dev, vreg->sc_irq, NULL, + qcom_labibb_sc_isr, + IRQF_ONESHOT | + IRQF_TRIGGER_RISING, + sc_irq_name, vreg); + if (ret) + return ret; } return 0; diff --git a/drivers/regulator/qcom-rpmh-regulator.c b/drivers/regulator/qcom-rpmh-regulator.c index 38dae4813f3b..79a554f1029d 100644 --- a/drivers/regulator/qcom-rpmh-regulator.c +++ b/drivers/regulator/qcom-rpmh-regulator.c @@ -732,6 +732,15 @@ static const struct rpmh_vreg_hw_data pmic5_hfsmps515 = { .of_map_mode = rpmh_regulator_pmic4_smps_of_map_mode, }; +static const struct rpmh_vreg_hw_data pmic5_hfsmps515_1 = { + .regulator_type = VRM, + .ops = &rpmh_regulator_vrm_ops, + .voltage_range = REGULATOR_LINEAR_RANGE(900000, 0, 4, 16000), + .n_voltages = 5, + .pmic_mode_map = pmic_mode_map_pmic5_smps, + .of_map_mode = rpmh_regulator_pmic4_smps_of_map_mode, +}; + static const struct rpmh_vreg_hw_data pmic5_bob = { .regulator_type = VRM, .ops = &rpmh_regulator_vrm_bypass_ops, @@ -932,6 +941,19 @@ static const struct rpmh_vreg_init_data pm8009_vreg_data[] = { {}, }; +static const struct rpmh_vreg_init_data pm8009_1_vreg_data[] = { + RPMH_VREG("smps1", "smp%s1", &pmic5_hfsmps510, "vdd-s1"), + RPMH_VREG("smps2", "smp%s2", &pmic5_hfsmps515_1, "vdd-s2"), + RPMH_VREG("ldo1", "ldo%s1", &pmic5_nldo, "vdd-l1"), + RPMH_VREG("ldo2", "ldo%s2", &pmic5_nldo, "vdd-l2"), + RPMH_VREG("ldo3", "ldo%s3", &pmic5_nldo, "vdd-l3"), + RPMH_VREG("ldo4", "ldo%s4", &pmic5_nldo, "vdd-l4"), + RPMH_VREG("ldo5", "ldo%s5", &pmic5_pldo, "vdd-l5-l6"), + RPMH_VREG("ldo6", "ldo%s6", &pmic5_pldo, "vdd-l5-l6"), + RPMH_VREG("ldo7", "ldo%s6", &pmic5_pldo_lv, "vdd-l7"), + {}, +}; + static const struct rpmh_vreg_init_data pm6150_vreg_data[] = { RPMH_VREG("smps1", "smp%s1", &pmic5_ftsmps510, "vdd-s1"), RPMH_VREG("smps2", "smp%s2", &pmic5_ftsmps510, "vdd-s2"), @@ -1058,6 +1080,10 @@ static const struct of_device_id __maybe_unused rpmh_regulator_match_table[] = { .data = pm8009_vreg_data, }, { + .compatible = "qcom,pm8009-1-rpmh-regulators", + .data = pm8009_1_vreg_data, + }, + { .compatible = "qcom,pm8150-rpmh-regulators", .data = pm8150_vreg_data, }, @@ -1090,6 +1116,14 @@ static const struct of_device_id __maybe_unused rpmh_regulator_match_table[] = { .data = pm6150l_vreg_data, }, { + .compatible = "qcom,pmc8180-rpmh-regulators", + .data = pm8150_vreg_data, + }, + { + .compatible = "qcom,pmc8180c-rpmh-regulators", + .data = pm8150l_vreg_data, + }, + { .compatible = "qcom,pmx55-rpmh-regulators", .data = pmx55_vreg_data, }, diff --git a/drivers/regulator/rt4831-regulator.c b/drivers/regulator/rt4831-regulator.c new file mode 100644 index 000000000000..3d4695ded629 --- /dev/null +++ b/drivers/regulator/rt4831-regulator.c @@ -0,0 +1,198 @@ +// SPDX-License-Identifier: GPL-2.0-only + +#include <linux/bitops.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/regulator/consumer.h> +#include <linux/regulator/driver.h> + +enum { + DSV_OUT_VLCM = 0, + DSV_OUT_VPOS, + DSV_OUT_VNEG, + DSV_OUT_MAX +}; + +#define RT4831_REG_DSVEN 0x09 +#define RT4831_REG_VLCM 0x0c +#define RT4831_REG_VPOS 0x0d +#define RT4831_REG_VNEG 0x0e +#define RT4831_REG_FLAGS 0x0f + +#define RT4831_VOLT_MASK GENMASK(5, 0) +#define RT4831_DSVMODE_SHIFT 5 +#define RT4831_DSVMODE_MASK GENMASK(7, 5) +#define RT4831_POSADEN_MASK BIT(4) +#define RT4831_NEGADEN_MASK BIT(3) +#define RT4831_POSEN_MASK BIT(2) +#define RT4831_NEGEN_MASK BIT(1) + +#define RT4831_OTP_MASK BIT(6) +#define RT4831_LCMOVP_MASK BIT(5) +#define RT4831_VPOSSCP_MASK BIT(3) +#define RT4831_VNEGSCP_MASK BIT(2) + +#define DSV_MODE_NORMAL (0x4 << RT4831_DSVMODE_SHIFT) +#define DSV_MODE_BYPASS (0x6 << RT4831_DSVMODE_SHIFT) +#define STEP_UV 50000 +#define VLCM_MIN_UV 4000000 +#define VLCM_MAX_UV 7150000 +#define VLCM_N_VOLTAGES ((VLCM_MAX_UV - VLCM_MIN_UV) / STEP_UV + 1) +#define VPN_MIN_UV 4000000 +#define VPN_MAX_UV 6500000 +#define VPN_N_VOLTAGES ((VPN_MAX_UV - VPN_MIN_UV) / STEP_UV + 1) + +static int rt4831_get_error_flags(struct regulator_dev *rdev, unsigned int *flags) +{ + struct regmap *regmap = rdev_get_regmap(rdev); + int rid = rdev_get_id(rdev); + unsigned int val, events = 0; + int ret; + + ret = regmap_read(regmap, RT4831_REG_FLAGS, &val); + if (ret) + return ret; + + if (val & RT4831_OTP_MASK) + events |= REGULATOR_ERROR_OVER_TEMP; + + if (rid == DSV_OUT_VLCM && (val & RT4831_LCMOVP_MASK)) + events |= REGULATOR_ERROR_OVER_CURRENT; + + if (rid == DSV_OUT_VPOS && (val & RT4831_VPOSSCP_MASK)) + events |= REGULATOR_ERROR_OVER_CURRENT; + + if (rid == DSV_OUT_VNEG && (val & RT4831_VNEGSCP_MASK)) + events |= REGULATOR_ERROR_OVER_CURRENT; + + *flags = events; + return 0; +} + +static const struct regulator_ops rt4831_dsvlcm_ops = { + .list_voltage = regulator_list_voltage_linear, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_bypass = regulator_set_bypass_regmap, + .get_bypass = regulator_get_bypass_regmap, + .get_error_flags = rt4831_get_error_flags, +}; + +static const struct regulator_ops rt4831_dsvpn_ops = { + .list_voltage = regulator_list_voltage_linear, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .set_active_discharge = regulator_set_active_discharge_regmap, + .get_error_flags = rt4831_get_error_flags, +}; + +static const struct regulator_desc rt4831_regulator_descs[] = { + { + .name = "DSVLCM", + .ops = &rt4831_dsvlcm_ops, + .of_match = of_match_ptr("DSVLCM"), + .regulators_node = of_match_ptr("regulators"), + .type = REGULATOR_VOLTAGE, + .id = DSV_OUT_VLCM, + .n_voltages = VLCM_N_VOLTAGES, + .min_uV = VLCM_MIN_UV, + .uV_step = STEP_UV, + .vsel_reg = RT4831_REG_VLCM, + .vsel_mask = RT4831_VOLT_MASK, + .bypass_reg = RT4831_REG_DSVEN, + .bypass_val_on = DSV_MODE_BYPASS, + .bypass_val_off = DSV_MODE_NORMAL, + }, + { + .name = "DSVP", + .ops = &rt4831_dsvpn_ops, + .of_match = of_match_ptr("DSVP"), + .regulators_node = of_match_ptr("regulators"), + .type = REGULATOR_VOLTAGE, + .id = DSV_OUT_VPOS, + .n_voltages = VPN_N_VOLTAGES, + .min_uV = VPN_MIN_UV, + .uV_step = STEP_UV, + .vsel_reg = RT4831_REG_VPOS, + .vsel_mask = RT4831_VOLT_MASK, + .enable_reg = RT4831_REG_DSVEN, + .enable_mask = RT4831_POSEN_MASK, + .active_discharge_reg = RT4831_REG_DSVEN, + .active_discharge_mask = RT4831_POSADEN_MASK, + }, + { + .name = "DSVN", + .ops = &rt4831_dsvpn_ops, + .of_match = of_match_ptr("DSVN"), + .regulators_node = of_match_ptr("regulators"), + .type = REGULATOR_VOLTAGE, + .id = DSV_OUT_VNEG, + .n_voltages = VPN_N_VOLTAGES, + .min_uV = VPN_MIN_UV, + .uV_step = STEP_UV, + .vsel_reg = RT4831_REG_VNEG, + .vsel_mask = RT4831_VOLT_MASK, + .enable_reg = RT4831_REG_DSVEN, + .enable_mask = RT4831_NEGEN_MASK, + .active_discharge_reg = RT4831_REG_DSVEN, + .active_discharge_mask = RT4831_NEGADEN_MASK, + } +}; + +static int rt4831_regulator_probe(struct platform_device *pdev) +{ + struct regmap *regmap; + struct regulator_dev *rdev; + struct regulator_config config = {}; + int i, ret; + + regmap = dev_get_regmap(pdev->dev.parent, NULL); + if (IS_ERR(regmap)) { + dev_err(&pdev->dev, "Failed to init regmap\n"); + return PTR_ERR(regmap); + } + + /* Configure DSV mode to normal by default */ + ret = regmap_update_bits(regmap, RT4831_REG_DSVEN, RT4831_DSVMODE_MASK, DSV_MODE_NORMAL); + if (ret) { + dev_err(&pdev->dev, "Failed to configure dsv mode to normal\n"); + return ret; + } + + config.dev = pdev->dev.parent; + config.regmap = regmap; + + for (i = 0; i < DSV_OUT_MAX; i++) { + rdev = devm_regulator_register(&pdev->dev, rt4831_regulator_descs + i, &config); + if (IS_ERR(rdev)) { + dev_err(&pdev->dev, "Failed to register %d regulator\n", i); + return PTR_ERR(rdev); + } + } + + return 0; +} + +static const struct platform_device_id rt4831_regulator_match[] = { + { "rt4831-regulator", 0 }, + {} +}; +MODULE_DEVICE_TABLE(platform, rt4831_regulator_match); + +static struct platform_driver rt4831_regulator_driver = { + .driver = { + .name = "rt4831-regulator", + }, + .id_table = rt4831_regulator_match, + .probe = rt4831_regulator_probe, +}; +module_platform_driver(rt4831_regulator_driver); + +MODULE_AUTHOR("ChiYuan Huang <cy_huang@richtek.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/regulator/s5m8767.c b/drivers/regulator/s5m8767.c index 3fa472127e9a..7c111bbdc2af 100644 --- a/drivers/regulator/s5m8767.c +++ b/drivers/regulator/s5m8767.c @@ -544,14 +544,18 @@ static int s5m8767_pmic_dt_parse_pdata(struct platform_device *pdev, rdata = devm_kcalloc(&pdev->dev, pdata->num_regulators, sizeof(*rdata), GFP_KERNEL); - if (!rdata) + if (!rdata) { + of_node_put(regulators_np); return -ENOMEM; + } rmode = devm_kcalloc(&pdev->dev, pdata->num_regulators, sizeof(*rmode), GFP_KERNEL); - if (!rmode) + if (!rmode) { + of_node_put(regulators_np); return -ENOMEM; + } pdata->regulators = rdata; pdata->opmode = rmode; @@ -573,10 +577,13 @@ static int s5m8767_pmic_dt_parse_pdata(struct platform_device *pdev, "s5m8767,pmic-ext-control", GPIOD_OUT_HIGH | GPIOD_FLAGS_BIT_NONEXCLUSIVE, "s5m8767"); - if (PTR_ERR(rdata->ext_control_gpiod) == -ENOENT) + if (PTR_ERR(rdata->ext_control_gpiod) == -ENOENT) { rdata->ext_control_gpiod = NULL; - else if (IS_ERR(rdata->ext_control_gpiod)) + } else if (IS_ERR(rdata->ext_control_gpiod)) { + of_node_put(reg_np); + of_node_put(regulators_np); return PTR_ERR(rdata->ext_control_gpiod); + } rdata->id = i; rdata->initdata = of_get_regulator_init_data( diff --git a/include/linux/mfd/abx500/ab8500.h b/include/linux/mfd/abx500/ab8500.h index 524a7e4702c2..302a330c5c84 100644 --- a/include/linux/mfd/abx500/ab8500.h +++ b/include/linux/mfd/abx500/ab8500.h @@ -368,7 +368,6 @@ struct ab8500 { int it_latchhier_num; }; -struct ab8500_regulator_platform_data; struct ab8500_codec_platform_data; struct ab8500_sysctrl_platform_data; @@ -376,11 +375,9 @@ struct ab8500_sysctrl_platform_data; * struct ab8500_platform_data - AB8500 platform data * @irq_base: start of AB8500 IRQs, AB8500_NR_IRQS will be used * @init: board-specific initialization after detection of ab8500 - * @regulator: machine-specific constraints for regulators */ struct ab8500_platform_data { void (*init) (struct ab8500 *); - struct ab8500_regulator_platform_data *regulator; struct ab8500_codec_platform_data *codec; struct ab8500_sysctrl_platform_data *sysctrl; }; diff --git a/include/linux/regulator/ab8500.h b/include/linux/regulator/ab8500.h deleted file mode 100644 index 3ab1ddf151a2..000000000000 --- a/include/linux/regulator/ab8500.h +++ /dev/null @@ -1,166 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * Authors: Sundar Iyer <sundar.iyer@stericsson.com> for ST-Ericsson - * Bengt Jonsson <bengt.g.jonsson@stericsson.com> for ST-Ericsson - * Daniel Willerud <daniel.willerud@stericsson.com> for ST-Ericsson - */ - -#ifndef __LINUX_MFD_AB8500_REGULATOR_H -#define __LINUX_MFD_AB8500_REGULATOR_H - -#include <linux/platform_device.h> - -/* AB8500 regulators */ -enum ab8500_regulator_id { - AB8500_LDO_AUX1, - AB8500_LDO_AUX2, - AB8500_LDO_AUX3, - AB8500_LDO_INTCORE, - AB8500_LDO_TVOUT, - AB8500_LDO_AUDIO, - AB8500_LDO_ANAMIC1, - AB8500_LDO_ANAMIC2, - AB8500_LDO_DMIC, - AB8500_LDO_ANA, - AB8500_NUM_REGULATORS, -}; - -/* AB8505 regulators */ -enum ab8505_regulator_id { - AB8505_LDO_AUX1, - AB8505_LDO_AUX2, - AB8505_LDO_AUX3, - AB8505_LDO_AUX4, - AB8505_LDO_AUX5, - AB8505_LDO_AUX6, - AB8505_LDO_INTCORE, - AB8505_LDO_ADC, - AB8505_LDO_AUDIO, - AB8505_LDO_ANAMIC1, - AB8505_LDO_ANAMIC2, - AB8505_LDO_AUX8, - AB8505_LDO_ANA, - AB8505_NUM_REGULATORS, -}; - -/* AB8500 and AB8505 register initialization */ -struct ab8500_regulator_reg_init { - int id; - u8 mask; - u8 value; -}; - -#define INIT_REGULATOR_REGISTER(_id, _mask, _value) \ - { \ - .id = _id, \ - .mask = _mask, \ - .value = _value, \ - } - -/* AB8500 registers */ -enum ab8500_regulator_reg { - AB8500_REGUREQUESTCTRL2, - AB8500_REGUREQUESTCTRL3, - AB8500_REGUREQUESTCTRL4, - AB8500_REGUSYSCLKREQ1HPVALID1, - AB8500_REGUSYSCLKREQ1HPVALID2, - AB8500_REGUHWHPREQ1VALID1, - AB8500_REGUHWHPREQ1VALID2, - AB8500_REGUHWHPREQ2VALID1, - AB8500_REGUHWHPREQ2VALID2, - AB8500_REGUSWHPREQVALID1, - AB8500_REGUSWHPREQVALID2, - AB8500_REGUSYSCLKREQVALID1, - AB8500_REGUSYSCLKREQVALID2, - AB8500_REGUMISC1, - AB8500_VAUDIOSUPPLY, - AB8500_REGUCTRL1VAMIC, - AB8500_VPLLVANAREGU, - AB8500_VREFDDR, - AB8500_EXTSUPPLYREGU, - AB8500_VAUX12REGU, - AB8500_VRF1VAUX3REGU, - AB8500_VAUX1SEL, - AB8500_VAUX2SEL, - AB8500_VRF1VAUX3SEL, - AB8500_REGUCTRL2SPARE, - AB8500_REGUCTRLDISCH, - AB8500_REGUCTRLDISCH2, - AB8500_NUM_REGULATOR_REGISTERS, -}; - -/* AB8505 registers */ -enum ab8505_regulator_reg { - AB8505_REGUREQUESTCTRL1, - AB8505_REGUREQUESTCTRL2, - AB8505_REGUREQUESTCTRL3, - AB8505_REGUREQUESTCTRL4, - AB8505_REGUSYSCLKREQ1HPVALID1, - AB8505_REGUSYSCLKREQ1HPVALID2, - AB8505_REGUHWHPREQ1VALID1, - AB8505_REGUHWHPREQ1VALID2, - AB8505_REGUHWHPREQ2VALID1, - AB8505_REGUHWHPREQ2VALID2, - AB8505_REGUSWHPREQVALID1, - AB8505_REGUSWHPREQVALID2, - AB8505_REGUSYSCLKREQVALID1, - AB8505_REGUSYSCLKREQVALID2, - AB8505_REGUVAUX4REQVALID, - AB8505_REGUMISC1, - AB8505_VAUDIOSUPPLY, - AB8505_REGUCTRL1VAMIC, - AB8505_VSMPSAREGU, - AB8505_VSMPSBREGU, - AB8505_VSAFEREGU, /* NOTE! PRCMU register */ - AB8505_VPLLVANAREGU, - AB8505_EXTSUPPLYREGU, - AB8505_VAUX12REGU, - AB8505_VRF1VAUX3REGU, - AB8505_VSMPSASEL1, - AB8505_VSMPSASEL2, - AB8505_VSMPSASEL3, - AB8505_VSMPSBSEL1, - AB8505_VSMPSBSEL2, - AB8505_VSMPSBSEL3, - AB8505_VSAFESEL1, /* NOTE! PRCMU register */ - AB8505_VSAFESEL2, /* NOTE! PRCMU register */ - AB8505_VSAFESEL3, /* NOTE! PRCMU register */ - AB8505_VAUX1SEL, - AB8505_VAUX2SEL, - AB8505_VRF1VAUX3SEL, - AB8505_VAUX4REQCTRL, - AB8505_VAUX4REGU, - AB8505_VAUX4SEL, - AB8505_REGUCTRLDISCH, - AB8505_REGUCTRLDISCH2, - AB8505_REGUCTRLDISCH3, - AB8505_CTRLVAUX5, - AB8505_CTRLVAUX6, - AB8505_NUM_REGULATOR_REGISTERS, -}; - -/* AB8500 external regulators */ -struct ab8500_ext_regulator_cfg { - bool hwreq; /* requires hw mode or high power mode */ -}; - -enum ab8500_ext_regulator_id { - AB8500_EXT_SUPPLY1, - AB8500_EXT_SUPPLY2, - AB8500_EXT_SUPPLY3, - AB8500_NUM_EXT_REGULATORS, -}; - -/* AB8500 regulator platform data */ -struct ab8500_regulator_platform_data { - int num_reg_init; - struct ab8500_regulator_reg_init *reg_init; - int num_regulator; - struct regulator_init_data *regulator; - int num_ext_regulator; - struct regulator_init_data *ext_regulator; -}; - -#endif diff --git a/include/linux/regulator/mt6315-regulator.h b/include/linux/regulator/mt6315-regulator.h new file mode 100644 index 000000000000..3b80d3f3910c --- /dev/null +++ b/include/linux/regulator/mt6315-regulator.h @@ -0,0 +1,44 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2021 MediaTek Inc. + */ + +#ifndef __LINUX_REGULATOR_MT6315_H +#define __LINUX_REGULATOR_MT6315_H + +#define MT6315_RP 3 +#define MT6315_PP 6 +#define MT6315_SP 7 + +enum { + MT6315_VBUCK1 = 0, + MT6315_VBUCK2, + MT6315_VBUCK3, + MT6315_VBUCK4, + MT6315_VBUCK_MAX, +}; + +/* Register */ +#define MT6315_TOP2_ELR7 0x139 +#define MT6315_TOP_TMA_KEY 0x39F +#define MT6315_TOP_TMA_KEY_H 0x3A0 +#define MT6315_BUCK_TOP_CON0 0x1440 +#define MT6315_BUCK_TOP_CON1 0x1443 +#define MT6315_BUCK_TOP_ELR0 0x1449 +#define MT6315_BUCK_TOP_ELR2 0x144B +#define MT6315_BUCK_TOP_ELR4 0x144D +#define MT6315_BUCK_TOP_ELR6 0x144F +#define MT6315_VBUCK1_DBG0 0x1499 +#define MT6315_VBUCK1_DBG4 0x149D +#define MT6315_VBUCK2_DBG0 0x1519 +#define MT6315_VBUCK2_DBG4 0x151D +#define MT6315_VBUCK3_DBG0 0x1599 +#define MT6315_VBUCK3_DBG4 0x159D +#define MT6315_VBUCK4_DBG0 0x1619 +#define MT6315_VBUCK4_DBG4 0x161D +#define MT6315_BUCK_TOP_4PHASE_ANA_CON42 0x16B1 + +#define PROTECTION_KEY_H 0x9C +#define PROTECTION_KEY 0xEA + +#endif /* __LINUX_REGULATOR_MT6315_H */ diff --git a/include/linux/regulator/pca9450.h b/include/linux/regulator/pca9450.h index 1bbd3014f906..ccdb5320a240 100644 --- a/include/linux/regulator/pca9450.h +++ b/include/linux/regulator/pca9450.h @@ -216,4 +216,11 @@ enum { #define IRQ_THERM_105 0x02 #define IRQ_THERM_125 0x01 +/* PCA9450_REG_RESET_CTRL bits */ +#define WDOG_B_CFG_MASK 0xC0 +#define WDOG_B_CFG_NONE 0x00 +#define WDOG_B_CFG_WARM 0x40 +#define WDOG_B_CFG_COLD_LDO12 0x80 +#define WDOG_B_CFG_COLD 0xC0 + #endif /* __LINUX_REG_PCA9450_H__ */ diff --git a/lib/linear_ranges.c b/lib/linear_ranges.c index 9495ef3572b7..ced5c15d3f04 100644 --- a/lib/linear_ranges.c +++ b/lib/linear_ranges.c @@ -128,7 +128,7 @@ EXPORT_SYMBOL_GPL(linear_range_get_value_array); * @selector: address where found selector value is updated * @found: flag to indicate that given value was in the range * - * Return selector which which range value is closest match for given + * Return selector for which range value is closest match for given * input value. Value is matching if it is equal or smaller than given * value. If given value is in the range, then @found is set true. * @@ -168,11 +168,11 @@ EXPORT_SYMBOL_GPL(linear_range_get_selector_low); * @selector: address where found selector value is updated * @found: flag to indicate that given value was in the range * - * Scan array of ranges for selector which which range value matches given + * Scan array of ranges for selector for which range value matches given * input value. Value is matching if it is equal or smaller than given * value. If given value is found to be in a range scanning is stopped and * @found is set true. If a range with values smaller than given value is found - * but the range max is being smaller than given value, then the ranges + * but the range max is being smaller than given value, then the range's * biggest selector is updated to @selector but scanning ranges is continued * and @found is set to false. * @@ -209,7 +209,7 @@ EXPORT_SYMBOL_GPL(linear_range_get_selector_low_array); * @selector: address where found selector value is updated * @found: flag to indicate that given value was in the range * - * Return selector which which range value is closest match for given + * Return selector for which range value is closest match for given * input value. Value is matching if it is equal or higher than given * value. If given value is in the range, then @found is set true. * |