diff options
-rw-r--r-- | drivers/mmc/host/sdhci.c | 63 | ||||
-rw-r--r-- | drivers/mmc/host/sdhci.h | 3 | ||||
-rw-r--r-- | include/linux/mmc/host.h | 4 | ||||
-rw-r--r-- | include/linux/pci_ids.h | 1 |
4 files changed, 61 insertions, 10 deletions
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index ff59d2e0475b..785bbdcf4a58 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -7,6 +7,10 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or (at * your option) any later version. + * + * Thanks to the following companies for their support: + * + * - JMicron (hardware and technical support) */ #include <linux/delay.h> @@ -26,13 +30,29 @@ static unsigned int debug_quirks = 0; +/* + * Different quirks to handle when the hardware deviates from a strict + * interpretation of the SDHCI specification. + */ + +/* Controller doesn't honor resets unless we touch the clock register */ #define SDHCI_QUIRK_CLOCK_BEFORE_RESET (1<<0) +/* Controller has bad caps bits, but really supports DMA */ #define SDHCI_QUIRK_FORCE_DMA (1<<1) /* Controller doesn't like some resets when there is no card inserted. */ #define SDHCI_QUIRK_NO_CARD_NO_RESET (1<<2) +/* Controller doesn't like clearing the power reg before a change */ #define SDHCI_QUIRK_SINGLE_POWER_WRITE (1<<3) +/* Controller has flaky internal state so reset it on each ios change */ #define SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS (1<<4) +/* Controller has an unusable DMA engine */ #define SDHCI_QUIRK_BROKEN_DMA (1<<5) +/* Controller can only DMA from 32-bit aligned addresses */ +#define SDHCI_QUIRK_32BIT_DMA_ADDR (1<<6) +/* Controller can only DMA chunk sizes that are a multiple of 32 bits */ +#define SDHCI_QUIRK_32BIT_DMA_SIZE (1<<7) +/* Controller needs to be reset after each request to stay stable */ +#define SDHCI_QUIRK_RESET_AFTER_REQUEST (1<<8) static const struct pci_device_id pci_ids[] __devinitdata = { { @@ -97,6 +117,16 @@ static const struct pci_device_id pci_ids[] __devinitdata = { SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS, }, + { + .vendor = PCI_VENDOR_ID_JMICRON, + .device = PCI_DEVICE_ID_JMICRON_JMB38X_SD, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = SDHCI_QUIRK_32BIT_DMA_ADDR | + SDHCI_QUIRK_32BIT_DMA_SIZE | + SDHCI_QUIRK_RESET_AFTER_REQUEST, + }, + { /* Generic SD host controller */ PCI_DEVICE_CLASS((PCI_CLASS_SYSTEM_SDHCI << 8), 0xFFFF00) }, @@ -419,7 +449,29 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_data *data) writeb(count, host->ioaddr + SDHCI_TIMEOUT_CONTROL); - if (host->flags & SDHCI_USE_DMA) { + if (host->flags & SDHCI_USE_DMA) + host->flags |= SDHCI_REQ_USE_DMA; + + if (unlikely((host->flags & SDHCI_REQ_USE_DMA) && + (host->chip->quirks & SDHCI_QUIRK_32BIT_DMA_SIZE) && + ((data->blksz * data->blocks) & 0x3))) { + DBG("Reverting to PIO because of transfer size (%d)\n", + data->blksz * data->blocks); + host->flags &= ~SDHCI_REQ_USE_DMA; + } + + /* + * The assumption here being that alignment is the same after + * translation to device address space. + */ + if (unlikely((host->flags & SDHCI_REQ_USE_DMA) && + (host->chip->quirks & SDHCI_QUIRK_32BIT_DMA_ADDR) && + (data->sg->offset & 0x3))) { + DBG("Reverting to PIO because of bad alignment\n"); + host->flags &= ~SDHCI_REQ_USE_DMA; + } + + if (host->flags & SDHCI_REQ_USE_DMA) { int count; count = pci_map_sg(host->chip->pdev, data->sg, data->sg_len, @@ -456,7 +508,7 @@ static void sdhci_set_transfer_mode(struct sdhci_host *host, mode |= SDHCI_TRNS_MULTI; if (data->flags & MMC_DATA_READ) mode |= SDHCI_TRNS_READ; - if (host->flags & SDHCI_USE_DMA) + if (host->flags & SDHCI_REQ_USE_DMA) mode |= SDHCI_TRNS_DMA; writew(mode, host->ioaddr + SDHCI_TRANSFER_MODE); @@ -472,7 +524,7 @@ static void sdhci_finish_data(struct sdhci_host *host) data = host->data; host->data = NULL; - if (host->flags & SDHCI_USE_DMA) { + if (host->flags & SDHCI_REQ_USE_DMA) { pci_unmap_sg(host->chip->pdev, data->sg, data->sg_len, (data->flags & MMC_DATA_READ)?PCI_DMA_FROMDEVICE:PCI_DMA_TODEVICE); } @@ -886,7 +938,8 @@ static void sdhci_tasklet_finish(unsigned long param) */ if (mrq->cmd->error || (mrq->data && (mrq->data->error || - (mrq->data->stop && mrq->data->stop->error)))) { + (mrq->data->stop && mrq->data->stop->error))) || + (host->chip->quirks & SDHCI_QUIRK_RESET_AFTER_REQUEST)) { /* Some controllers need this kick or reset won't work here */ if (host->chip->quirks & SDHCI_QUIRK_CLOCK_BEFORE_RESET) { @@ -1284,7 +1337,7 @@ static int __devinit sdhci_probe_slot(struct pci_dev *pdev, int slot) version = readw(host->ioaddr + SDHCI_HOST_VERSION); version = (version & SDHCI_SPEC_VER_MASK) >> SDHCI_SPEC_VER_SHIFT; - if (version != 0) { + if (version > 1) { printk(KERN_ERR "%s: Unknown controller version (%d). " "You may experience problems.\n", host->slot_descr, version); diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h index 05195ea900f4..e4d77b038bfa 100644 --- a/drivers/mmc/host/sdhci.h +++ b/drivers/mmc/host/sdhci.h @@ -171,7 +171,8 @@ struct sdhci_host { spinlock_t lock; /* Mutex */ int flags; /* Host attributes */ -#define SDHCI_USE_DMA (1<<0) +#define SDHCI_USE_DMA (1<<0) /* Host is DMA capable */ +#define SDHCI_REQ_USE_DMA (1<<1) /* Use DMA for this req. */ unsigned int max_clk; /* Max possible freq (MHz) */ unsigned int timeout_clk; /* Timeout freq (KHz) */ diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index 125eee1407ff..7ab962fa1d73 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -118,10 +118,6 @@ struct mmc_host { unsigned int removed:1; /* host is being removed */ #endif - unsigned int mode; /* current card mode of host */ -#define MMC_MODE_MMC 0 -#define MMC_MODE_SD 1 - struct mmc_card *card; /* device attached to this host */ wait_queue_head_t wq; diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 111aa10f1136..023656d2f1da 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -2148,6 +2148,7 @@ #define PCI_DEVICE_ID_JMICRON_JMB365 0x2365 #define PCI_DEVICE_ID_JMICRON_JMB366 0x2366 #define PCI_DEVICE_ID_JMICRON_JMB368 0x2368 +#define PCI_DEVICE_ID_JMICRON_JMB38X_SD 0x2381 #define PCI_VENDOR_ID_KORENIX 0x1982 #define PCI_DEVICE_ID_KORENIX_JETCARDF0 0x1600 |