diff options
| -rw-r--r-- | arch/arm/boot/dts/imx6qdl-apalis.dtsi | 4 | ||||
| -rw-r--r-- | arch/arm/boot/dts/imx6qdl-colibri.dtsi | 4 | ||||
| -rw-r--r-- | arch/arm/boot/dts/imx6ull-colibri.dtsi | 8 |
3 files changed, 8 insertions, 8 deletions
diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi index 8380f1b26826..5e6cec92e090 100644 --- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi +++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi @@ -369,8 +369,8 @@ pinctrl-names = "default", "recovery"; pinctrl-0 = <&pinctrl_i2c3>; pinctrl-1 = <&pinctrl_i2c3_recovery>; - scl-gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>; - sda-gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>; + scl-gpios = <&gpio3 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio3 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/imx6qdl-colibri.dtsi index 87e15e7cb32b..8a27c2a05678 100644 --- a/arch/arm/boot/dts/imx6qdl-colibri.dtsi +++ b/arch/arm/boot/dts/imx6qdl-colibri.dtsi @@ -298,8 +298,8 @@ pinctrl-names = "default", "recovery"; pinctrl-0 = <&pinctrl_i2c3>; pinctrl-1 = <&pinctrl_i2c3_recovery>; - scl-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; - sda-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; + scl-gpios = <&gpio1 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6ull-colibri.dtsi b/arch/arm/boot/dts/imx6ull-colibri.dtsi index 6c63a7384611..9ad1da159768 100644 --- a/arch/arm/boot/dts/imx6ull-colibri.dtsi +++ b/arch/arm/boot/dts/imx6ull-colibri.dtsi @@ -94,16 +94,16 @@ pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c1>; pinctrl-1 = <&pinctrl_i2c1_gpio>; - sda-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>; - scl-gpios = <&gpio1 28 GPIO_ACTIVE_LOW>; + sda-gpios = <&gpio1 29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio1 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; }; &i2c2 { pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c2>; pinctrl-1 = <&pinctrl_i2c2_gpio>; - sda-gpios = <&gpio1 31 GPIO_ACTIVE_LOW>; - scl-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; + sda-gpios = <&gpio1 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio1 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "okay"; ad7879@2c { |