diff options
192 files changed, 4176 insertions, 1320 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 34cef2546e42..4047f5724da3 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -10,6 +10,7 @@ config ARM default y select HAVE_AOUT select HAVE_IDE + select HAVE_MEMBLOCK select RTC_LIB select SYS_SUPPORTS_APM_EMULATION select GENERIC_ATOMIC64 if (!CPU_32v6K) @@ -24,6 +25,7 @@ config ARM select HAVE_KERNEL_LZMA select HAVE_PERF_EVENTS select PERF_USE_VMALLOC + select HAVE_REGS_AND_STACK_ACCESS_API help The ARM series is a line of low-power-consumption RISC chip designs licensed by ARM Ltd and targeted at embedded applications and @@ -704,7 +706,6 @@ config ARCH_SHARK config ARCH_LH7A40X bool "Sharp LH7A40X" select CPU_ARM922T - select ARCH_DISCONTIGMEM_ENABLE if !LH7A40X_CONTIGMEM select ARCH_SPARSEMEM_ENABLE if !LH7A40X_CONTIGMEM select ARCH_USES_GETTIMEOFFSET help @@ -1016,11 +1017,6 @@ endmenu source "arch/arm/common/Kconfig" -config FORCE_MAX_ZONEORDER - int - depends on SA1111 - default "9" - menu "Bus support" config ARM_AMBA @@ -1157,9 +1153,10 @@ config HOTPLUG_CPU config LOCAL_TIMERS bool "Use local timer interrupts" depends on SMP && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || \ - REALVIEW_EB_A9MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || ARCH_U8500) + REALVIEW_EB_A9MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || \ + ARCH_U8500 || ARCH_VEXPRESS_CA9X4) default y - select HAVE_ARM_TWD if (ARCH_REALVIEW || ARCH_OMAP4 || ARCH_U8500) + select HAVE_ARM_TWD if (ARCH_REALVIEW || ARCH_VEXPRESS || ARCH_OMAP4 || ARCH_U8500) help Enable support for local timers on SMP platforms, rather then the legacy IPI broadcast method. Local timers allows the system @@ -1226,10 +1223,6 @@ config OABI_COMPAT config ARCH_HAS_HOLES_MEMORYMODEL bool -# Discontigmem is deprecated -config ARCH_DISCONTIGMEM_ENABLE - bool - config ARCH_SPARSEMEM_ENABLE bool @@ -1237,13 +1230,7 @@ config ARCH_SPARSEMEM_DEFAULT def_bool ARCH_SPARSEMEM_ENABLE config ARCH_SELECT_MEMORY_MODEL - def_bool ARCH_DISCONTIGMEM_ENABLE && ARCH_SPARSEMEM_ENABLE - -config NODES_SHIFT - int - default "4" if ARCH_LH7A40X - default "2" - depends on NEED_MULTIPLE_NODES + def_bool ARCH_SPARSEMEM_ENABLE config HIGHMEM bool "High Memory Support (EXPERIMENTAL)" @@ -1275,8 +1262,36 @@ config HW_PERF_EVENTS Enable hardware performance counter support for perf events. If disabled, perf events will use software events only. +config SPARSE_IRQ + bool "Support sparse irq numbering" + depends on EXPERIMENTAL + help + This enables support for sparse irqs. This is useful in general + as most CPUs have a fairly sparse array of IRQ vectors, which + the irq_desc then maps directly on to. Systems with a high + number of off-chip IRQs will want to treat this as + experimental until they have been independently verified. + + If you don't know what to do here, say N. + source "mm/Kconfig" +config FORCE_MAX_ZONEORDER + int "Maximum zone order" if ARCH_SHMOBILE + range 11 64 if ARCH_SHMOBILE + default "9" if SA1111 + default "11" + help + The kernel memory allocator divides physically contiguous memory + blocks into "zones", where each zone is a power of two number of + pages. This option selects the largest power of two that the kernel + keeps in the memory allocator. If you need to allocate very large + blocks of physically contiguous memory, then you may need to + increase this value. + + This config option is actually maximum order plus one. For example, + a value of 11 means that the largest free memory block is 2^10 pages. + config LEDS bool "Timer and CPU usage LEDs" depends on ARCH_CDB89712 || ARCH_EBSA110 || \ diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c index 337741f734ac..7dfa9a85bc0c 100644 --- a/arch/arm/common/gic.c +++ b/arch/arm/common/gic.c @@ -108,6 +108,51 @@ static void gic_unmask_irq(unsigned int irq) spin_unlock(&irq_controller_lock); } +static int gic_set_type(unsigned int irq, unsigned int type) +{ + void __iomem *base = gic_dist_base(irq); + unsigned int gicirq = gic_irq(irq); + u32 enablemask = 1 << (gicirq % 32); + u32 enableoff = (gicirq / 32) * 4; + u32 confmask = 0x2 << ((gicirq % 16) * 2); + u32 confoff = (gicirq / 16) * 4; + bool enabled = false; + u32 val; + + /* Interrupt configuration for SGIs can't be changed */ + if (gicirq < 16) + return -EINVAL; + + if (type != IRQ_TYPE_LEVEL_HIGH && type != IRQ_TYPE_EDGE_RISING) + return -EINVAL; + + spin_lock(&irq_controller_lock); + + val = readl(base + GIC_DIST_CONFIG + confoff); + if (type == IRQ_TYPE_LEVEL_HIGH) + val &= ~confmask; + else if (type == IRQ_TYPE_EDGE_RISING) + val |= confmask; + + /* + * As recommended by the spec, disable the interrupt before changing + * the configuration + */ + if (readl(base + GIC_DIST_ENABLE_SET + enableoff) & enablemask) { + writel(enablemask, base + GIC_DIST_ENABLE_CLEAR + enableoff); + enabled = true; + } + + writel(val, base + GIC_DIST_CONFIG + confoff); + + if (enabled) + writel(enablemask, base + GIC_DIST_ENABLE_SET + enableoff); + + spin_unlock(&irq_controller_lock); + + return 0; +} + #ifdef CONFIG_SMP static int gic_set_cpu(unsigned int irq, const struct cpumask *mask_val) { @@ -161,6 +206,7 @@ static struct irq_chip gic_chip = { .ack = gic_ack_irq, .mask = gic_mask_irq, .unmask = gic_unmask_irq, + .set_type = gic_set_type, #ifdef CONFIG_SMP .set_affinity = gic_set_cpu, #endif diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c index 6f80665f477e..ac2fd440652e 100644 --- a/arch/arm/common/sa1111.c +++ b/arch/arm/common/sa1111.c @@ -185,13 +185,10 @@ static struct sa1111_dev_info sa1111_devices[] = { }, }; -void __init sa1111_adjust_zones(int node, unsigned long *size, unsigned long *holes) +void __init sa1111_adjust_zones(unsigned long *size, unsigned long *holes) { unsigned int sz = SZ_1M >> PAGE_SHIFT; - if (node != 0) - sz = 0; - size[1] = size[0] - sz; size[0] = sz; } diff --git a/arch/arm/include/asm/hwcap.h b/arch/arm/include/asm/hwcap.h index f7bd52b1c365..c1062c317103 100644 --- a/arch/arm/include/asm/hwcap.h +++ b/arch/arm/include/asm/hwcap.h @@ -19,6 +19,7 @@ #define HWCAP_NEON 4096 #define HWCAP_VFPv3 8192 #define HWCAP_VFPv3D16 16384 +#define HWCAP_TLS 32768 #if defined(__KERNEL__) && !defined(__ASSEMBLY__) /* diff --git a/arch/arm/include/asm/irq.h b/arch/arm/include/asm/irq.h index 237282f7c762..2721a5814cb9 100644 --- a/arch/arm/include/asm/irq.h +++ b/arch/arm/include/asm/irq.h @@ -7,6 +7,8 @@ #define irq_canonicalize(i) (i) #endif +#define NR_IRQS_LEGACY 16 + /* * Use this value to indicate lack of interrupt * capability diff --git a/arch/arm/include/asm/kexec.h b/arch/arm/include/asm/kexec.h index df15a0dc228e..8ec9ef5c3c7b 100644 --- a/arch/arm/include/asm/kexec.h +++ b/arch/arm/include/asm/kexec.h @@ -19,10 +19,26 @@ #ifndef __ASSEMBLY__ -struct kimage; -/* Provide a dummy definition to avoid build failures. */ +/** + * crash_setup_regs() - save registers for the panic kernel + * @newregs: registers are saved here + * @oldregs: registers to be saved (may be %NULL) + * + * Function copies machine registers from @oldregs to @newregs. If @oldregs is + * %NULL then current registers are stored there. + */ static inline void crash_setup_regs(struct pt_regs *newregs, - struct pt_regs *oldregs) { } + struct pt_regs *oldregs) +{ + if (oldregs) { + memcpy(newregs, oldregs, sizeof(*newregs)); + } else { + __asm__ __volatile__ ("stmia %0, {r0 - r15}" + : : "r" (&newregs->ARM_r0)); + __asm__ __volatile__ ("mrs %0, cpsr" + : "=r" (newregs->ARM_cpsr)); + } +} #endif /* __ASSEMBLY__ */ diff --git a/arch/arm/include/asm/mach/arch.h b/arch/arm/include/asm/mach/arch.h index c59842dc7cb8..8a0dd18ba642 100644 --- a/arch/arm/include/asm/mach/arch.h +++ b/arch/arm/include/asm/mach/arch.h @@ -20,6 +20,7 @@ struct machine_desc { * by assembler code in head.S, head-common.S */ unsigned int nr; /* architecture number */ + unsigned int nr_irqs; /* number of IRQs */ unsigned int phys_io; /* start of physical io */ unsigned int io_pg_offst; /* byte offset for io * page tabe entry */ @@ -37,6 +38,7 @@ struct machine_desc { void (*fixup)(struct machine_desc *, struct tag *, char **, struct meminfo *); + void (*reserve)(void);/* reserve mem blocks */ void (*map_io)(void);/* IO mapping function */ void (*init_irq)(void); struct sys_timer *timer; /* system tick timer */ diff --git a/arch/arm/include/asm/mach/irq.h b/arch/arm/include/asm/mach/irq.h index 8920b2d6e3b8..ce3eee9fe26c 100644 --- a/arch/arm/include/asm/mach/irq.h +++ b/arch/arm/include/asm/mach/irq.h @@ -17,6 +17,7 @@ struct seq_file; /* * This is internal. Do not use it. */ +extern unsigned int arch_nr_irqs; extern void (*init_arch_irq)(void); extern void init_FIQ(void); extern int show_fiq_list(struct seq_file *, void *); diff --git a/arch/arm/include/asm/memblock.h b/arch/arm/include/asm/memblock.h new file mode 100644 index 000000000000..fdbc43b2e6c0 --- /dev/null +++ b/arch/arm/include/asm/memblock.h @@ -0,0 +1,16 @@ +#ifndef _ASM_ARM_MEMBLOCK_H +#define _ASM_ARM_MEMBLOCK_H + +#ifdef CONFIG_MMU +extern phys_addr_t lowmem_end_addr; +#define MEMBLOCK_REAL_LIMIT lowmem_end_addr +#else +#define MEMBLOCK_REAL_LIMIT 0 +#endif + +struct meminfo; +struct machine_desc; + +extern void arm_memblock_init(struct meminfo *, struct machine_desc *); + +#endif diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h index 4312ee5e3d0b..82df0ae71bb4 100644 --- a/arch/arm/include/asm/memory.h +++ b/arch/arm/include/asm/memory.h @@ -158,7 +158,7 @@ #endif #ifndef arch_adjust_zones -#define arch_adjust_zones(node,size,holes) do { } while (0) +#define arch_adjust_zones(size,holes) do { } while (0) #elif !defined(CONFIG_ZONE_DMA) #error "custom arch_adjust_zones() requires CONFIG_ZONE_DMA" #endif @@ -234,76 +234,11 @@ static inline __deprecated void *bus_to_virt(unsigned long x) * virt_to_page(k) convert a _valid_ virtual address to struct page * * virt_addr_valid(k) indicates whether a virtual address is valid */ -#ifndef CONFIG_DISCONTIGMEM - #define ARCH_PFN_OFFSET PHYS_PFN_OFFSET #define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT) #define virt_addr_valid(kaddr) ((unsigned long)(kaddr) >= PAGE_OFFSET && (unsigned long)(kaddr) < (unsigned long)high_memory) -#define PHYS_TO_NID(addr) (0) - -#else /* CONFIG_DISCONTIGMEM */ - -/* - * This is more complex. We have a set of mem_map arrays spread - * around in memory. - */ -#include <linux/numa.h> - -#define arch_pfn_to_nid(pfn) PFN_TO_NID(pfn) -#define arch_local_page_offset(pfn, nid) LOCAL_MAP_NR((pfn) << PAGE_SHIFT) - -#define virt_to_page(kaddr) \ - (ADDR_TO_MAPBASE(kaddr) + LOCAL_MAP_NR(kaddr)) - -#define virt_addr_valid(kaddr) (KVADDR_TO_NID(kaddr) < MAX_NUMNODES) - -/* - * Common discontigmem stuff. - * PHYS_TO_NID is used by the ARM kernel/setup.c - */ -#define PHYS_TO_NID(addr) PFN_TO_NID((addr) >> PAGE_SHIFT) - -/* - * Given a kaddr, ADDR_TO_MAPBASE finds the owning node of the memory - * and returns the mem_map of that node. - */ -#define ADDR_TO_MAPBASE(kaddr) NODE_MEM_MAP(KVADDR_TO_NID(kaddr)) - -/* - * Given a page frame number, find the owning node of the memory - * and returns the mem_map of that node. - */ -#define PFN_TO_MAPBASE(pfn) NODE_MEM_MAP(PFN_TO_NID(pfn)) - -#ifdef NODE_MEM_SIZE_BITS -#define NODE_MEM_SIZE_MASK ((1 << NODE_MEM_SIZE_BITS) - 1) - -/* - * Given a kernel address, find the home node of the underlying memory. - */ -#define KVADDR_TO_NID(addr) \ - (((unsigned long)(addr) - PAGE_OFFSET) >> NODE_MEM_SIZE_BITS) - -/* - * Given a page frame number, convert it to a node id. - */ -#define PFN_TO_NID(pfn) \ - (((pfn) - PHYS_PFN_OFFSET) >> (NODE_MEM_SIZE_BITS - PAGE_SHIFT)) - -/* - * Given a kaddr, LOCAL_MEM_MAP finds the owning node of the memory - * and returns the index corresponding to the appropriate page in the - * node's mem_map. - */ -#define LOCAL_MAP_NR(addr) \ - (((unsigned long)(addr) & NODE_MEM_SIZE_MASK) >> PAGE_SHIFT) - -#endif /* NODE_MEM_SIZE_BITS */ - -#endif /* !CONFIG_DISCONTIGMEM */ - /* * Optional coherency support. Currently used only by selected * Intel XSC3-based systems. diff --git a/arch/arm/include/asm/mmzone.h b/arch/arm/include/asm/mmzone.h deleted file mode 100644 index ae63a4fd28c8..000000000000 --- a/arch/arm/include/asm/mmzone.h +++ /dev/null @@ -1,30 +0,0 @@ -/* - * arch/arm/include/asm/mmzone.h - * - * 1999-12-29 Nicolas Pitre Created - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ASM_MMZONE_H -#define __ASM_MMZONE_H - -/* - * Currently defined in arch/arm/mm/discontig.c - */ -extern pg_data_t discontig_node_data[]; - -/* - * Return a pointer to the node data for node n. - */ -#define NODE_DATA(nid) (&discontig_node_data[nid]) - -/* - * NODE_MEM_MAP gives the kaddr for the mem_map of the node. - */ -#define NODE_MEM_MAP(nid) (NODE_DATA(nid)->node_mem_map) - -#include <mach/memory.h> - -#endif diff --git a/arch/arm/include/asm/ptrace.h b/arch/arm/include/asm/ptrace.h index 9dcb11e59026..c974be8913a7 100644 --- a/arch/arm/include/asm/ptrace.h +++ b/arch/arm/include/asm/ptrace.h @@ -184,6 +184,42 @@ extern unsigned long profile_pc(struct pt_regs *regs); #define predicate(x) ((x) & 0xf0000000) #define PREDICATE_ALWAYS 0xe0000000 +/* + * kprobe-based event tracer support + */ +#include <linux/stddef.h> +#include <linux/types.h> +#define MAX_REG_OFFSET (offsetof(struct pt_regs, ARM_ORIG_r0)) + +extern int regs_query_register_offset(const char *name); +extern const char *regs_query_register_name(unsigned int offset); +extern bool regs_within_kernel_stack(struct pt_regs *regs, unsigned long addr); +extern unsigned long regs_get_kernel_stack_nth(struct pt_regs *regs, + unsigned int n); + +/** + * regs_get_register() - get register value from its offset + * @regs: pt_regs from which register value is gotten + * @offset: offset number of the register. + * + * regs_get_register returns the value of a register whose offset from @regs. + * The @offset is the offset of the register in struct pt_regs. + * If @offset is bigger than MAX_REG_OFFSET, this returns 0. + */ +static inline unsigned long regs_get_register(struct pt_regs *regs, + unsigned int offset) +{ + if (unlikely(offset > MAX_REG_OFFSET)) + return 0; + return *(unsigned long *)((unsigned long)regs + offset); +} + +/* Valid only for Kernel mode traps. */ +static inline unsigned long kernel_stack_pointer(struct pt_regs *regs) +{ + return regs->ARM_sp; +} + #endif /* __KERNEL__ */ #endif /* __ASSEMBLY__ */ diff --git a/arch/arm/include/asm/setup.h b/arch/arm/include/asm/setup.h index f392fb4437af..f1e5a9bca249 100644 --- a/arch/arm/include/asm/setup.h +++ b/arch/arm/include/asm/setup.h @@ -201,8 +201,7 @@ static struct tagtable __tagtable_##fn __tag = { tag, fn } struct membank { unsigned long start; unsigned long size; - unsigned short node; - unsigned short highmem; + unsigned int highmem; }; struct meminfo { @@ -212,9 +211,8 @@ struct meminfo { extern struct meminfo meminfo; -#define for_each_nodebank(iter,mi,no) \ - for (iter = 0; iter < (mi)->nr_banks; iter++) \ - if ((mi)->bank[iter].node == no) +#define for_each_bank(iter,mi) \ + for (iter = 0; iter < (mi)->nr_banks; iter++) #define bank_pfn_start(bank) __phys_to_pfn((bank)->start) #define bank_pfn_end(bank) __phys_to_pfn((bank)->start + (bank)->size) diff --git a/arch/arm/include/asm/tls.h b/arch/arm/include/asm/tls.h new file mode 100644 index 000000000000..e71d6ff8d104 --- /dev/null +++ b/arch/arm/include/asm/tls.h @@ -0,0 +1,46 @@ +#ifndef __ASMARM_TLS_H +#define __ASMARM_TLS_H + +#ifdef __ASSEMBLY__ + .macro set_tls_none, tp, tmp1, tmp2 + .endm + + .macro set_tls_v6k, tp, tmp1, tmp2 + mcr p15, 0, \tp, c13, c0, 3 @ set TLS register + .endm + + .macro set_tls_v6, tp, tmp1, tmp2 + ldr \tmp1, =elf_hwcap + ldr \tmp1, [\tmp1, #0] + mov \tmp2, #0xffff0fff + tst \tmp1, #HWCAP_TLS @ hardware TLS available? + mcrne p15, 0, \tp, c13, c0, 3 @ yes, set TLS register + streq \tp, [\tmp2, #-15] @ set TLS value at 0xffff0ff0 + .endm + + .macro set_tls_software, tp, tmp1, tmp2 + mov \tmp1, #0xffff0fff + str \tp, [\tmp1, #-15] @ set TLS value at 0xffff0ff0 + .endm +#endif + +#ifdef CONFIG_TLS_REG_EMUL +#define tls_emu 1 +#define has_tls_reg 1 +#define set_tls set_tls_none +#elif __LINUX_ARM_ARCH__ >= 7 || \ + (__LINUX_ARM_ARCH__ == 6 && defined(CONFIG_CPU_32v6K)) +#define tls_emu 0 +#define has_tls_reg 1 +#define set_tls set_tls_v6k +#elif __LINUX_ARM_ARCH__ == 6 +#define tls_emu 0 +#define has_tls_reg (elf_hwcap & HWCAP_TLS) +#define set_tls set_tls_v6 +#else +#define tls_emu 0 +#define has_tls_reg 0 +#define set_tls set_tls_software +#endif + +#endif /* __ASMARM_TLS_H */ diff --git a/arch/arm/include/asm/vfpmacros.h b/arch/arm/include/asm/vfpmacros.h index 422f3cc204a2..3d5fc41ae8d3 100644 --- a/arch/arm/include/asm/vfpmacros.h +++ b/arch/arm/include/asm/vfpmacros.h @@ -3,6 +3,8 @@ * * Assembler-only file containing VFP macros and register definitions. */ +#include <asm/hwcap.h> + #include "vfp.h" @ Macros to allow building with old toolkits (with no VFP support) @@ -22,12 +24,20 @@ LDC p11, cr0, [\base],#32*4 @ FLDMIAD \base!, {d0-d15} #endif #ifdef CONFIG_VFPv3 +#if __LINUX_ARM_ARCH__ <= 6 + ldr \tmp, =elf_hwcap @ may not have MVFR regs + ldr \tmp, [\tmp, #0] + tst \tmp, #HWCAP_VFPv3D16 + ldceq p11, cr0, [\base],#32*4 @ FLDMIAD \base!, {d16-d31} + addne \base, \base, #32*4 @ step over unused register space +#else VFPFMRX \tmp, MVFR0 @ Media and VFP Feature Register 0 and \tmp, \tmp, #MVFR0_A_SIMD_MASK @ A_SIMD field cmp \tmp, #2 @ 32 x 64bit registers? ldceql p11, cr0, [\base],#32*4 @ FLDMIAD \base!, {d16-d31} addne \base, \base, #32*4 @ step over unused register space #endif +#endif .endm @ write all the working registers out of the VFP @@ -38,10 +48,18 @@ STC p11, cr0, [\base],#32*4 @ FSTMIAD \base!, {d0-d15} #endif #ifdef CONFIG_VFPv3 +#if __LINUX_ARM_ARCH__ <= 6 + ldr \tmp, =elf_hwcap @ may not have MVFR regs + ldr \tmp, [\tmp, #0] + tst \tmp, #HWCAP_VFPv3D16 + stceq p11, cr0, [\base],#32*4 @ FSTMIAD \base!, {d16-d31} + addne \base, \base, #32*4 @ step over unused register space +#else VFPFMRX \tmp, MVFR0 @ Media and VFP Feature Register 0 and \tmp, \tmp, #MVFR0_A_SIMD_MASK @ A_SIMD field cmp \tmp, #2 @ 32 x 64bit registers? stceql p11, cr0, [\base],#32*4 @ FSTMIAD \base!, {d16-d31} addne \base, \base, #32*4 @ step over unused register space #endif +#endif .endm diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index 26d302c28e13..ea023c6aa31e 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -39,6 +39,7 @@ obj-$(CONFIG_ARM_THUMBEE) += thumbee.o obj-$(CONFIG_KGDB) += kgdb.o obj-$(CONFIG_ARM_UNWIND) += unwind.o obj-$(CONFIG_HAVE_TCM) += tcm.o +obj-$(CONFIG_CRASH_DUMP) += crash_dump.o obj-$(CONFIG_CRUNCH) += crunch.o crunch-bits.o AFLAGS_crunch-bits.o := -Wa,-mcpu=ep9312 diff --git a/arch/arm/kernel/crash_dump.c b/arch/arm/kernel/crash_dump.c new file mode 100644 index 000000000000..cd3b853a8a6d --- /dev/null +++ b/arch/arm/kernel/crash_dump.c @@ -0,0 +1,60 @@ +/* + * arch/arm/kernel/crash_dump.c + * + * Copyright (C) 2010 Nokia Corporation. + * Author: Mika Westerberg + * + * This code is taken from arch/x86/kernel/crash_dump_64.c + * Created by: Hariprasad Nellitheertha (hari@in.ibm.com) + * Copyright (C) IBM Corporation, 2004. All rights reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/errno.h> +#include <linux/crash_dump.h> +#include <linux/uaccess.h> +#include <linux/io.h> + +/* stores the physical address of elf header of crash image */ +unsigned long long elfcorehdr_addr = ELFCORE_ADDR_MAX; + +/** + * copy_oldmem_page() - copy one page from old kernel memory + * @pfn: page frame number to be copied + * @buf: buffer where the copied page is placed + * @csize: number of bytes to copy + * @offset: offset in bytes into the page + * @userbuf: if set, @buf is int he user address space + * + * This function copies one page from old kernel memory into buffer pointed by + * @buf. If @buf is in userspace, set @userbuf to %1. Returns number of bytes + * copied or negative error in case of failure. + */ +ssize_t copy_oldmem_page(unsigned long pfn, char *buf, + size_t csize, unsigned long offset, + int userbuf) +{ + void *vaddr; + + if (!csize) + return 0; + + vaddr = ioremap(pfn << PAGE_SHIFT, PAGE_SIZE); + if (!vaddr) + return -ENOMEM; + + if (userbuf) { + if (copy_to_user(buf, vaddr + offset, csize)) { + iounmap(vaddr); + return -EFAULT; + } + } else { + memcpy(buf, vaddr + offset, csize); + } + + iounmap(vaddr); + return csize; +} diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index 3fd7861de4d1..e864e482118a 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -22,6 +22,7 @@ #include <asm/thread_notify.h> #include <asm/unwind.h> #include <asm/unistd.h> +#include <asm/tls.h> #include "entry-header.S" @@ -735,12 +736,7 @@ ENTRY(__switch_to) #ifdef CONFIG_MMU ldr r6, [r2, #TI_CPU_DOMAIN] #endif -#if defined(CONFIG_HAS_TLS_REG) - mcr p15, 0, r3, c13, c0, 3 @ set TLS register -#elif !defined(CONFIG_TLS_REG_EMUL) - mov r4, #0xffff0fff - str r3, [r4, #-15] @ TLS val at 0xffff0ff0 -#endif + set_tls r3, r4, r5 #ifdef CONFIG_MMU mcr p15, 0, r6, c3, c0, 0 @ Set domain register #endif @@ -1005,17 +1001,12 @@ kuser_cmpxchg_fixup: */ __kuser_get_tls: @ 0xffff0fe0 - -#if !defined(CONFIG_HAS_TLS_REG) && !defined(CONFIG_TLS_REG_EMUL) - ldr r0, [pc, #(16 - 8)] @ TLS stored at 0xffff0ff0 -#else - mrc p15, 0, r0, c13, c0, 3 @ read TLS register -#endif + ldr r0, [pc, #(16 - 8)] @ read TLS, set in kuser_get_tls_init usr_ret lr - - .rep 5 - .word 0 @ pad up to __kuser_helper_version - .endr + mrc p15, 0, r0, c13, c0, 3 @ 0xffff0fe8 hardware TLS code + .rep 4 + .word 0 @ 0xffff0ff0 software TLS value, then + .endr @ pad up to __kuser_helper_version /* * Reference declaration: diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c index 3b3d2c80509c..c0d5c3b3a760 100644 --- a/arch/arm/kernel/irq.c +++ b/arch/arm/kernel/irq.c @@ -47,12 +47,14 @@ #define irq_finish(irq) do { } while (0) #endif +unsigned int arch_nr_irqs; void (*init_arch_irq)(void) __initdata = NULL; unsigned long irq_err_count; int show_interrupts(struct seq_file *p, void *v) { int i = *(loff_t *) v, cpu; + struct irq_desc *desc; struct irqaction * action; unsigned long flags; @@ -67,24 +69,25 @@ int show_interrupts(struct seq_file *p, void *v) seq_putc(p, '\n'); } - if (i < NR_IRQS) { - raw_spin_lock_irqsave(&irq_desc[i].lock, flags); - action = irq_desc[i].action; + if (i < nr_irqs) { + desc = irq_to_desc(i); + raw_spin_lock_irqsave(&desc->lock, flags); + action = desc->action; if (!action) goto unlock; seq_printf(p, "%3d: ", i); for_each_present_cpu(cpu) seq_printf(p, "%10u ", kstat_irqs_cpu(i, cpu)); - seq_printf(p, " %10s", irq_desc[i].chip->name ? : "-"); + seq_printf(p, " %10s", desc->chip->name ? : "-"); seq_printf(p, " %s", action->name); for (action = action->next; action; action = action->next) seq_printf(p, ", %s", action->name); seq_putc(p, '\n'); unlock: - raw_spin_unlock_irqrestore(&irq_desc[i].lock, flags); - } else if (i == NR_IRQS) { + raw_spin_unlock_irqrestore(&desc->lock, flags); + } else if (i == nr_irqs) { #ifdef CONFIG_FIQ show_fiq_list(p, v); #endif @@ -112,7 +115,7 @@ asmlinkage void __exception asm_do_IRQ(unsigned int irq, struct pt_regs *regs) * Some hardware gives randomly wrong interrupts. Rather * than crashing, do something sensible. */ - if (unlikely(irq >= NR_IRQS)) { + if (unlikely(irq >= nr_irqs)) { if (printk_ratelimit()) printk(KERN_WARNING "Bad IRQ%u\n", irq); ack_bad_irq(irq); @@ -132,12 +135,12 @@ void set_irq_flags(unsigned int irq, unsigned int iflags) struct irq_desc *desc; unsigned long flags; - if (irq >= NR_IRQS) { + if (irq >= nr_irqs) { printk(KERN_ERR "Trying to set irq flags for IRQ%d\n", irq); return; } - desc = irq_desc + irq; + desc = irq_to_desc(irq); raw_spin_lock_irqsave(&desc->lock, flags); desc->status |= IRQ_NOREQUEST | IRQ_NOPROBE | IRQ_NOAUTOEN; if (iflags & IRQF_VALID) @@ -151,14 +154,25 @@ void set_irq_flags(unsigned int irq, unsigned int iflags) void __init init_IRQ(void) { + struct irq_desc *desc; int irq; - for (irq = 0; irq < NR_IRQS; irq++) - irq_desc[irq].status |= IRQ_NOREQUEST | IRQ_NOPROBE; + for (irq = 0; irq < nr_irqs; irq++) { + desc = irq_to_desc_alloc_node(irq, 0); + desc->status |= IRQ_NOREQUEST | IRQ_NOPROBE; + } init_arch_irq(); } +#ifdef CONFIG_SPARSE_IRQ +int __init arch_probe_nr_irqs(void) +{ + nr_irqs = arch_nr_irqs ? arch_nr_irqs : NR_IRQS; + return 0; +} +#endif + #ifdef CONFIG_HOTPLUG_CPU static void route_irq(struct irq_desc *desc, unsigned int irq, unsigned int cpu) @@ -178,10 +192,9 @@ static void route_irq(struct irq_desc *desc, unsigned int irq, unsigned int cpu) void migrate_irqs(void) { unsigned int i, cpu = smp_processor_id(); + struct irq_desc *desc; - for (i = 0; i < NR_IRQS; i++) { - struct irq_desc *desc = irq_desc + i; - + for_each_irq_desc(i, desc) { if (desc->node == cpu) { unsigned int newcpu = cpumask_any_and(desc->affinity, cpu_online_mask); diff --git a/arch/arm/kernel/machine_kexec.c b/arch/arm/kernel/machine_kexec.c index 598ca61e7bca..81e989858d42 100644 --- a/arch/arm/kernel/machine_kexec.c +++ b/arch/arm/kernel/machine_kexec.c @@ -43,6 +43,10 @@ void machine_shutdown(void) void machine_crash_shutdown(struct pt_regs *regs) { + local_irq_disable(); + crash_save_cpu(regs, smp_processor_id()); + + printk(KERN_INFO "Loading crashdump kernel...\n"); } void machine_kexec(struct kimage *image) diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c index 3f562a7c0a99..f99d489822d5 100644 --- a/arch/arm/kernel/ptrace.c +++ b/arch/arm/kernel/ptrace.c @@ -52,6 +52,102 @@ #define BREAKINST_THUMB 0xde01 #endif +struct pt_regs_offset { + const char *name; + int offset; +}; + +#define REG_OFFSET_NAME(r) \ + {.name = #r, .offset = offsetof(struct pt_regs, ARM_##r)} +#define REG_OFFSET_END {.name = NULL, .offset = 0} + +static const struct pt_regs_offset regoffset_table[] = { + REG_OFFSET_NAME(r0), + REG_OFFSET_NAME(r1), + REG_OFFSET_NAME(r2), + REG_OFFSET_NAME(r3), + REG_OFFSET_NAME(r4), + REG_OFFSET_NAME(r5), + REG_OFFSET_NAME(r6), + REG_OFFSET_NAME(r7), + REG_OFFSET_NAME(r8), + REG_OFFSET_NAME(r9), + REG_OFFSET_NAME(r10), + REG_OFFSET_NAME(fp), + REG_OFFSET_NAME(ip), + REG_OFFSET_NAME(sp), + REG_OFFSET_NAME(lr), + REG_OFFSET_NAME(pc), + REG_OFFSET_NAME(cpsr), + REG_OFFSET_NAME(ORIG_r0), + REG_OFFSET_END, +}; + +/** + * regs_query_register_offset() - query register offset from its name + * @name: the name of a register + * + * regs_query_register_offset() returns the offset of a register in struct + * pt_regs from its name. If the name is invalid, this returns -EINVAL; + */ +int regs_query_register_offset(const char *name) +{ + const struct pt_regs_offset *roff; + for (roff = regoffset_table; roff->name != NULL; roff++) + if (!strcmp(roff->name, name)) + return roff->offset; + return -EINVAL; +} + +/** + * regs_query_register_name() - query register name from its offset + * @offset: the offset of a register in struct pt_regs. + * + * regs_query_register_name() returns the name of a register from its + * offset in struct pt_regs. If the @offset is invalid, this returns NULL; + */ +const char *regs_query_register_name(unsigned int offset) +{ + const struct pt_regs_offset *roff; + for (roff = regoffset_table; roff->name != NULL; roff++) + if (roff->offset == offset) + return roff->name; + return NULL; +} + +/** + * regs_within_kernel_stack() - check the address in the stack + * @regs: pt_regs which contains kernel stack pointer. + * @addr: address which is checked. + * + * regs_within_kernel_stack() checks @addr is within the kernel stack page(s). + * If @addr is within the kernel stack, it returns true. If not, returns false. + */ +bool regs_within_kernel_stack(struct pt_regs *regs, unsigned long addr) +{ + return ((addr & ~(THREAD_SIZE - 1)) == + (kernel_stack_pointer(regs) & ~(THREAD_SIZE - 1))); +} + +/** + * regs_get_kernel_stack_nth() - get Nth entry of the stack + * @regs: pt_regs which contains kernel stack pointer. + * @n: stack entry number. + * + * regs_get_kernel_stack_nth() returns @n th entry of the kernel stack which + * is specified by @regs. If the @n th entry is NOT in the kernel stack, + * this returns 0. + */ +unsigned long regs_get_kernel_stack_nth(struct pt_regs *regs, unsigned int n) +{ + unsigned long *addr = (unsigned long *)kernel_stack_pointer(regs); + addr += n; + if (regs_within_kernel_stack(regs, (unsigned long)addr)) + return *addr; + else + return 0; +} + /* * this routine will get a word off of the processes privileged stack. * the offset is how far from the base addr as stored in the THREAD. diff --git a/arch/arm/kernel/relocate_kernel.S b/arch/arm/kernel/relocate_kernel.S index 61930eb09029..fd26f8d65151 100644 --- a/arch/arm/kernel/relocate_kernel.S +++ b/arch/arm/kernel/relocate_kernel.S @@ -10,6 +10,12 @@ relocate_new_kernel: ldr r0,kexec_indirection_page ldr r1,kexec_start_address + /* + * If there is no indirection page (we are doing crashdumps) + * skip any relocation. + */ + cmp r0, #0 + beq 2f 0: /* top, read another word for the indirection page */ ldr r3, [r0],#4 diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 122d999bdc7c..776ea1aa974b 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -19,12 +19,15 @@ #include <linux/seq_file.h> #include <linux/screen_info.h> #include <linux/init.h> +#include <linux/kexec.h> +#include <linux/crash_dump.h> #include <linux/root_dev.h> #include <linux/cpu.h> #include <linux/interrupt.h> #include <linux/smp.h> #include <linux/fs.h> #include <linux/proc_fs.h> +#include <linux/memblock.h> #include <asm/unified.h> #include <asm/cpu.h> @@ -269,6 +272,21 @@ static void __init cacheid_init(void) extern struct proc_info_list *lookup_processor_type(unsigned int); extern struct machine_desc *lookup_machine_type(unsigned int); +static void __init feat_v6_fixup(void) +{ + int id = read_cpuid_id(); + + if ((id & 0xff0f0000) != 0x41070000) + return; + + /* + * HWCAP_TLS is available only on 1136 r1p0 and later, + * see also kuser_get_tls_init. + */ + if ((((id >> 4) & 0xfff) == 0xb36) && (((id >> 20) & 3) == 0)) + elf_hwcap &= ~HWCAP_TLS; +} + static void __init setup_processor(void) { struct proc_info_list *list; @@ -311,6 +329,8 @@ static void __init setup_processor(void) elf_hwcap &= ~HWCAP_THUMB; #endif + feat_v6_fixup(); + cacheid_init(); cpu_proc_init(); } @@ -402,13 +422,12 @@ static int __init arm_add_memory(unsigned long start, unsigned long size) size -= start & ~PAGE_MASK; bank->start = PAGE_ALIGN(start); bank->size = size & PAGE_MASK; - bank->node = PHYS_TO_NID(start); /* * Check whether this memory region has non-zero size or * invalid node number. */ - if (bank->size == 0 || bank->node >= MAX_NUMNODES) + if (bank->size == 0) return -EINVAL; meminfo.nr_banks++; @@ -663,6 +682,79 @@ static int __init customize_machine(void) } arch_initcall(customize_machine); +#ifdef CONFIG_KEXEC +static inline unsigned long long get_total_mem(void) +{ + unsigned long total; + + total = max_low_pfn - min_low_pfn; + return total << PAGE_SHIFT; +} + +/** + * reserve_crashkernel() - reserves memory are for crash kernel + * + * This function reserves memory area given in "crashkernel=" kernel command + * line parameter. The memory reserved is used by a dump capture kernel when + * primary kernel is crashing. + */ +static void __init reserve_crashkernel(void) +{ + unsigned long long crash_size, crash_base; + unsigned long long total_mem; + int ret; + + total_mem = get_total_mem(); + ret = parse_crashkernel(boot_command_line, total_mem, + &crash_size, &crash_base); + if (ret) + return; + + ret = reserve_bootmem(crash_base, crash_size, BOOTMEM_EXCLUSIVE); + if (ret < 0) { + printk(KERN_WARNING "crashkernel reservation failed - " + "memory is in use (0x%lx)\n", (unsigned long)crash_base); + return; + } + + printk(KERN_INFO "Reserving %ldMB of memory at %ldMB " + "for crashkernel (System RAM: %ldMB)\n", + (unsigned long)(crash_size >> 20), + (unsigned long)(crash_base >> 20), + (unsigned long)(total_mem >> 20)); + + crashk_res.start = crash_base; + crashk_res.end = crash_base + crash_size - 1; + insert_resource(&iomem_resource, &crashk_res); +} +#else +static inline void reserve_crashkernel(void) {} +#endif /* CONFIG_KEXEC */ + +/* + * Note: elfcorehdr_addr is not just limited to vmcore. It is also used by + * is_kdump_kernel() to determine if we are booting after a panic. Hence + * ifdef it under CONFIG_CRASH_DUMP and not CONFIG_PROC_VMCORE. + */ + +#ifdef CONFIG_CRASH_DUMP +/* + * elfcorehdr= specifies the location of elf core header stored by the crashed + * kernel. This option will be passed by kexec loader to the capture kernel. + */ +static int __init setup_elfcorehdr(char *arg) +{ + char *end; + + if (!arg) + return -EINVAL; + + elfcorehdr_addr = memparse(arg, &end); + return end > arg ? 0 : -EINVAL; +} +early_param("elfcorehdr", setup_elfcorehdr); +#endif /* CONFIG_CRASH_DUMP */ + void __init setup_arch(char **cmdline_p) { struct tag *tags = (struct tag *)&init_tags; @@ -716,12 +808,15 @@ void __init setup_arch(char **cmdline_p) parse_early_param(); + arm_memblock_init(&meminfo, mdesc); + paging_init(mdesc); request_standard_resources(&meminfo, mdesc); #ifdef CONFIG_SMP smp_init_cpus(); #endif + reserve_crashkernel(); cpu_init(); tcm_init(); @@ -729,6 +824,7 @@ void __init setup_arch(char **cmdline_p) /* * Set up various architecture-specific pointers */ + arch_nr_irqs = mdesc->nr_irqs; init_arch_irq = mdesc->init_irq; system_timer = mdesc->timer; init_machine = mdesc->init_machine; diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index 1621e5327b2a..cda78d59aa31 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -30,6 +30,7 @@ #include <asm/unistd.h> #include <asm/traps.h> #include <asm/unwind.h> +#include <asm/tls.h> #include "ptrace.h" #include "signal.h" @@ -518,17 +519,20 @@ asmlinkage int arm_syscall(int no, struct pt_regs *regs) case NR(set_tls): thread->tp_value = regs->ARM_r0; -#if defined(CONFIG_HAS_TLS_REG) - asm ("mcr p15, 0, %0, c13, c0, 3" : : "r" (regs->ARM_r0) ); -#elif !defined(CONFIG_TLS_REG_EMUL) - /* - * User space must never try to access this directly. - * Expect your app to break eventually if you do so. - * The user helper at 0xffff0fe0 must be used instead. - * (see entry-armv.S for details) - */ - *((unsigned int *)0xffff0ff0) = regs->ARM_r0; -#endif + if (tls_emu) + return 0; + if (has_tls_reg) { + asm ("mcr p15, 0, %0, c13, c0, 3" + : : "r" (regs->ARM_r0)); + } else { + /* + * User space must never try to access this directly. + * Expect your app to break eventually if you do so. + * The user helper at 0xffff0fe0 must be used instead. + * (see entry-armv.S for details) + */ + *((unsigned int *)0xffff0ff0) = regs->ARM_r0; + } return 0; #ifdef CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG @@ -743,6 +747,16 @@ void __init trap_init(void) return; } +static void __init kuser_get_tls_init(unsigned long vectors) +{ + /* + * vectors + 0xfe0 = __kuser_get_tls + * vectors + 0xfe8 = hardware TLS instruction at 0xffff0fe8 + */ + if (tls_emu || has_tls_reg) + memcpy((void *)vectors + 0xfe0, (void *)vectors + 0xfe8, 4); +} + void __init early_trap_init(void) { unsigned long vectors = CONFIG_VECTORS_BASE; @@ -761,6 +775,11 @@ void __init early_trap_init(void) memcpy((void *)vectors + 0x1000 - kuser_sz, __kuser_helper_start, kuser_sz); /* + * Do processor specific fixups for the kuser helpers + */ + kuser_get_tls_init(vectors); + + /* * Copy signal return handlers into the vector page, and * set sigreturn to be a pointer to these. */ diff --git a/arch/arm/mach-aaec2000/include/mach/memory.h b/arch/arm/mach-aaec2000/include/mach/memory.h index c00822543d9f..4f93c567a35a 100644 --- a/arch/arm/mach-aaec2000/include/mach/memory.h +++ b/arch/arm/mach-aaec2000/include/mach/memory.h @@ -14,14 +14,4 @@ #define PHYS_OFFSET UL(0xf0000000) -/* - * The nodes are the followings: - * - * node 0: 0xf000.0000 - 0xf3ff.ffff - * node 1: 0xf400.0000 - 0xf7ff.ffff - * node 2: 0xf800.0000 - 0xfbff.ffff - * node 3: 0xfc00.0000 - 0xffff.ffff - */ -#define NODE_MEM_SIZE_BITS 26 - #endif /* __ASM_ARCH_MEMORY_H */ diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 841eaf8f27e2..939bccd70569 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -366,6 +366,17 @@ config MACH_STAMP9G20 endif +if (ARCH_AT91SAM9260 || ARCH_AT91SAM9G20) +comment "AT91SAM9260/AT91SAM9G20 boards" + +config MACH_SNAPPER_9260 + bool "Bluewater Systems Snapper 9260/9G20 module" + help + Select this if you are using the Bluewater Systems Snapper 9260 or + Snapper 9G20 modules. + <http://www.bluewatersys.com/> +endif + # ---------------------------------------------------------- if ARCH_AT91SAM9G45 diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index c1f821e58222..ca2ac003f41f 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -66,6 +66,9 @@ obj-$(CONFIG_MACH_CPU9G20) += board-cpu9krea.o obj-$(CONFIG_MACH_STAMP9G20) += board-stamp9g20.o obj-$(CONFIG_MACH_PORTUXG20) += board-stamp9g20.o +# AT91SAM9260/AT91SAM9G20 board-specific support +obj-$(CONFIG_MACH_SNAPPER_9260) += board-snapper9260.o + # AT91SAM9G45 board-specific support obj-$(CONFIG_MACH_AT91SAM9G45EKES) += board-sam9m10g45ek.o diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c index 85166b7e69a1..753c0d31a3d3 100644 --- a/arch/arm/mach-at91/at91sam9g45.c +++ b/arch/arm/mach-at91/at91sam9g45.c @@ -20,6 +20,7 @@ #include <mach/at91_pmc.h> #include <mach/at91_rstc.h> #include <mach/at91_shdwc.h> +#include <mach/cpu.h> #include "generic.h" #include "clock.h" @@ -176,6 +177,13 @@ static struct clk mmc1_clk = { .type = CLK_TYPE_PERIPHERAL, }; +/* Video decoder clock - Only for sam9m10/sam9m11 */ +static struct clk vdec_clk = { + .name = "vdec_clk", + .pmc_mask = 1 << AT91SAM9G45_ID_VDEC, + .type = CLK_TYPE_PERIPHERAL, +}; + /* One additional fake clock for ohci */ static struct clk ohci_clk = { .name = "ohci_clk", @@ -239,6 +247,9 @@ static void __init at91sam9g45_register_clocks(void) for (i = 0; i < ARRAY_SIZE(periph_clocks); i++) clk_register(periph_clocks[i]); + if (cpu_is_at91sam9m10() || cpu_is_at91sam9m11()) + clk_register(&vdec_clk); + clk_register(&pck0); clk_register(&pck1); } diff --git a/arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c b/arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c index a4102d72cc9b..c49f5c003ee1 100644 --- a/arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c +++ b/arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c @@ -26,6 +26,9 @@ #include <linux/spi/spi.h> #include <linux/spi/at73c213.h> #include <linux/clk.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/consumer.h> #include <mach/hardware.h> #include <asm/setup.h> @@ -235,6 +238,46 @@ static struct gpio_led ek_leds[] = { } }; +#if defined(CONFIG_REGULATOR_FIXED_VOLTAGE) || defined(CONFIG_REGULATOR_FIXED_VOLTAGE_MODULE) +static struct regulator_consumer_supply ek_audio_consumer_supplies[] = { + REGULATOR_SUPPLY("AVDD", "0-001b"), + REGULATOR_SUPPLY("HPVDD", "0-001b"), + REGULATOR_SUPPLY("DBVDD", "0-001b"), + REGULATOR_SUPPLY("DCVDD", "0-001b"), +}; + +static struct regulator_init_data ek_avdd_reg_init_data = { + .constraints = { + .name = "3V3", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .consumer_supplies = ek_audio_consumer_supplies, + .num_consumer_supplies = ARRAY_SIZE(ek_audio_consumer_supplies), +}; + +static struct fixed_voltage_config ek_vdd_pdata = { + .supply_name = "board-3V3", + .microvolts = 3300000, + .gpio = -EINVAL, + .enabled_at_boot = 0, + .init_data = &ek_avdd_reg_init_data, +}; +static struct platform_device ek_voltage_regulator = { + .name = "reg-fixed-voltage", + .id = -1, + .num_resources = 0, + .dev = { + .platform_data = &ek_vdd_pdata, + }, +}; +static void __init ek_add_regulators(void) +{ + platform_device_register(&ek_voltage_regulator); +} +#else +static void __init ek_add_regulators(void) {} +#endif + static struct i2c_board_info __initdata ek_i2c_devices[] = { { I2C_BOARD_INFO("24c512", 0x50), @@ -256,6 +299,8 @@ static void __init ek_board_init(void) ek_add_device_nand(); /* Ethernet */ at91_add_device_eth(&ek_macb_data); + /* Regulators */ + ek_add_regulators(); /* MMC */ #if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE) at91_add_device_mci(0, &ek_mmc_data); diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c index c11fd47aec5d..6ea9808b8868 100644 --- a/arch/arm/mach-at91/board-sam9g20ek.c +++ b/arch/arm/mach-at91/board-sam9g20ek.c @@ -27,6 +27,9 @@ #include <linux/gpio_keys.h> #include <linux/input.h> #include <linux/clk.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/consumer.h> #include <mach/hardware.h> #include <asm/setup.h> @@ -269,6 +272,46 @@ static void __init ek_add_device_buttons(void) static void __init ek_add_device_buttons(void) {} #endif +#if defined(CONFIG_REGULATOR_FIXED_VOLTAGE) || defined(CONFIG_REGULATOR_FIXED_VOLTAGE_MODULE) +static struct regulator_consumer_supply ek_audio_consumer_supplies[] = { + REGULATOR_SUPPLY("AVDD", "0-001b"), + REGULATOR_SUPPLY("HPVDD", "0-001b"), + REGULATOR_SUPPLY("DBVDD", "0-001b"), + REGULATOR_SUPPLY("DCVDD", "0-001b"), +}; + +static struct regulator_init_data ek_avdd_reg_init_data = { + .constraints = { + .name = "3V3", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .consumer_supplies = ek_audio_consumer_supplies, + .num_consumer_supplies = ARRAY_SIZE(ek_audio_consumer_supplies), +}; + +static struct fixed_voltage_config ek_vdd_pdata = { + .supply_name = "board-3V3", + .microvolts = 3300000, + .gpio = -EINVAL, + .enabled_at_boot = 0, + .init_data = &ek_avdd_reg_init_data, +}; +static struct platform_device ek_voltage_regulator = { + .name = "reg-fixed-voltage", + .id = -1, + .num_resources = 0, + .dev = { + .platform_data = &ek_vdd_pdata, + }, +}; +static void __init ek_add_regulators(void) +{ + platform_device_register(&ek_voltage_regulator); +} +#else +static void __init ek_add_regulators(void) {} +#endif + static struct i2c_board_info __initdata ek_i2c_devices[] = { { @@ -294,6 +337,8 @@ static void __init ek_board_init(void) ek_add_device_nand(); /* Ethernet */ at91_add_device_eth(&ek_macb_data); + /* Regulators */ + ek_add_regulators(); /* MMC */ at91_add_device_mmc(0, &ek_mmc_data); /* I2C */ diff --git a/arch/arm/mach-at91/board-snapper9260.c b/arch/arm/mach-at91/board-snapper9260.c new file mode 100644 index 000000000000..2c08ae4ad3a1 --- /dev/null +++ b/arch/arm/mach-at91/board-snapper9260.c @@ -0,0 +1,189 @@ +/* + * linux/arch/arm/mach-at91/board-snapper9260.c + * + * Copyright (C) 2010 Bluewater System Ltd + * + * Author: Andre Renaud <andre@bluewatersys.com> + * Author: Ryan Mallon <ryan@bluewatersys.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include <linux/init.h> +#include <linux/gpio.h> +#include <linux/platform_device.h> +#include <linux/spi/spi.h> +#include <linux/i2c/pca953x.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> + +#include <mach/hardware.h> +#include <mach/board.h> +#include <mach/at91sam9_smc.h> + +#include "sam9_smc.h" +#include "generic.h" + +#define SNAPPER9260_IO_EXP_GPIO(x) (NR_BUILTIN_GPIO + (x)) + +static void __init snapper9260_map_io(void) +{ + at91sam9260_initialize(18432000); + + /* Debug on ttyS0 */ + at91_register_uart(0, 0, 0); + at91_set_serial_console(0); + + at91_register_uart(AT91SAM9260_ID_US0, 1, + ATMEL_UART_CTS | ATMEL_UART_RTS); + at91_register_uart(AT91SAM9260_ID_US1, 2, + ATMEL_UART_CTS | ATMEL_UART_RTS); + at91_register_uart(AT91SAM9260_ID_US2, 3, 0); +} + +static void __init snapper9260_init_irq(void) +{ + at91sam9260_init_interrupts(NULL); +} + +static struct at91_usbh_data __initdata snapper9260_usbh_data = { + .ports = 2, +}; + +static struct at91_udc_data __initdata snapper9260_udc_data = { + .vbus_pin = SNAPPER9260_IO_EXP_GPIO(5), + .vbus_active_low = 1, + .vbus_polled = 1, +}; + +static struct at91_eth_data snapper9260_macb_data = { + .is_rmii = 1, +}; + +static struct mtd_partition __initdata snapper9260_nand_partitions[] = { + { + .name = "Preboot", + .offset = 0, + .size = SZ_128K, + }, + { + .name = "Bootloader", + .offset = MTDPART_OFS_APPEND, + .size = SZ_256K, + }, + { + .name = "Environment", + .offset = MTDPART_OFS_APPEND, + .size = SZ_128K, + }, + { + .name = "Kernel", + .offset = MTDPART_OFS_APPEND, + .size = SZ_4M, + }, + { + .name = "Filesystem", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct mtd_partition * __init +snapper9260_nand_partition_info(int size, int *num_partitions) +{ + *num_partitions = ARRAY_SIZE(snapper9260_nand_partitions); + return snapper9260_nand_partitions; +} + +static struct atmel_nand_data __initdata snapper9260_nand_data = { + .ale = 21, + .cle = 22, + .rdy_pin = AT91_PIN_PC13, + .partition_info = snapper9260_nand_partition_info, + .bus_width_16 = 0, +}; + +static struct sam9_smc_config __initdata snapper9260_nand_smc_config = { + .ncs_read_setup = 0, + .nrd_setup = 0, + .ncs_write_setup = 0, + .nwe_setup = 0, + + .ncs_read_pulse = 5, + .nrd_pulse = 2, + .ncs_write_pulse = 5, + .nwe_pulse = 2, + + .read_cycle = 7, + .write_cycle = 7, + + .mode = (AT91_SMC_READMODE | AT91_SMC_WRITEMODE | + AT91_SMC_EXNWMODE_DISABLE), + .tdf_cycles = 1, +}; + +static struct pca953x_platform_data snapper9260_io_expander_data = { + .gpio_base = SNAPPER9260_IO_EXP_GPIO(0), +}; + +static struct i2c_board_info __initdata snapper9260_i2c_devices[] = { + { + /* IO expander */ + I2C_BOARD_INFO("max7312", 0x28), + .platform_data = &snapper9260_io_expander_data, + }, + { + /* Audio codec */ + I2C_BOARD_INFO("tlv320aic23", 0x1a), + }, + { + /* RTC */ + I2C_BOARD_INFO("isl1208", 0x6f), + }, +}; + +static void __init snapper9260_add_device_nand(void) +{ + at91_set_A_periph(AT91_PIN_PC14, 0); + sam9_smc_configure(3, &snapper9260_nand_smc_config); + at91_add_device_nand(&snapper9260_nand_data); +} + +static void __init snapper9260_board_init(void) +{ + at91_add_device_i2c(snapper9260_i2c_devices, + ARRAY_SIZE(snapper9260_i2c_devices)); + at91_add_device_serial(); + at91_add_device_usbh(&snapper9260_usbh_data); + at91_add_device_udc(&snapper9260_udc_data); + at91_add_device_eth(&snapper9260_macb_data); + at91_add_device_ssc(AT91SAM9260_ID_SSC, (ATMEL_SSC_TF | ATMEL_SSC_TK | + ATMEL_SSC_TD | ATMEL_SSC_RD)); + snapper9260_add_device_nand(); +} + +MACHINE_START(SNAPPER_9260, "Bluewater Systems Snapper 9260/9G20 module") + .phys_io = AT91_BASE_SYS, + .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc, + .boot_params = AT91_SDRAM_BASE + 0x100, + .timer = &at91sam926x_timer, + .map_io = snapper9260_map_io, + .init_irq = snapper9260_init_irq, + .init_machine = snapper9260_board_init, +MACHINE_END + + diff --git a/arch/arm/mach-at91/include/mach/at91cap9.h b/arch/arm/mach-at91/include/mach/at91cap9.h index d8c1ededaa75..9c6af9737485 100644 --- a/arch/arm/mach-at91/include/mach/at91cap9.h +++ b/arch/arm/mach-at91/include/mach/at91cap9.h @@ -84,7 +84,7 @@ */ #define AT91_ECC (0xffffe200 - AT91_BASE_SYS) #define AT91_BCRAMC (0xffffe400 - AT91_BASE_SYS) -#define AT91_DDRSDRC (0xffffe600 - AT91_BASE_SYS) +#define AT91_DDRSDRC0 (0xffffe600 - AT91_BASE_SYS) #define AT91_SMC (0xffffe800 - AT91_BASE_SYS) #define AT91_MATRIX (0xffffea00 - AT91_BASE_SYS) #define AT91_CCFG (0xffffeb10 - AT91_BASE_SYS) diff --git a/arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h b/arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h index 1499b1cbffdd..976f4a6c3353 100644 --- a/arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h +++ b/arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h @@ -15,7 +15,7 @@ #ifndef AT91CAP9_DDRSDR_H #define AT91CAP9_DDRSDR_H -#define AT91_DDRSDRC_MR (AT91_DDRSDRC + 0x00) /* Mode Register */ +#define AT91_DDRSDRC_MR 0x00 /* Mode Register */ #define AT91_DDRSDRC_MODE (0xf << 0) /* Command Mode */ #define AT91_DDRSDRC_MODE_NORMAL 0 #define AT91_DDRSDRC_MODE_NOP 1 @@ -25,10 +25,10 @@ #define AT91_DDRSDRC_MODE_EXT_LMR 5 #define AT91_DDRSDRC_MODE_DEEP 6 -#define AT91_DDRSDRC_RTR (AT91_DDRSDRC + 0x04) /* Refresh Timer Register */ +#define AT91_DDRSDRC_RTR 0x04 /* Refresh Timer Register */ #define AT91_DDRSDRC_COUNT (0xfff << 0) /* Refresh Timer Counter */ -#define AT91_DDRSDRC_CR (AT91_DDRSDRC + 0x08) /* Configuration Register */ +#define AT91_DDRSDRC_CR 0x08 /* Configuration Register */ #define AT91_DDRSDRC_NC (3 << 0) /* Number of Column Bits */ #define AT91_DDRSDRC_NC_SDR8 (0 << 0) #define AT91_DDRSDRC_NC_SDR9 (1 << 0) @@ -49,7 +49,7 @@ #define AT91_DDRSDRC_DLL (1 << 7) /* Reset DLL */ #define AT91_DDRSDRC_DICDS (1 << 8) /* Output impedance control */ -#define AT91_DDRSDRC_T0PR (AT91_DDRSDRC + 0x0C) /* Timing 0 Register */ +#define AT91_DDRSDRC_T0PR 0x0C /* Timing 0 Register */ #define AT91_DDRSDRC_TRAS (0xf << 0) /* Active to Precharge delay */ #define AT91_DDRSDRC_TRCD (0xf << 4) /* Row to Column delay */ #define AT91_DDRSDRC_TWR (0xf << 8) /* Write recovery delay */ @@ -59,13 +59,13 @@ #define AT91_DDRSDRC_TWTR (1 << 24) /* Internal Write to Read delay */ #define AT91_DDRSDRC_TMRD (0xf << 28) /* Load mode to active/refresh delay */ -#define AT91_DDRSDRC_T1PR (AT91_DDRSDRC + 0x10) /* Timing 1 Register */ +#define AT91_DDRSDRC_T1PR 0x10 /* Timing 1 Register */ #define AT91_DDRSDRC_TRFC (0x1f << 0) /* Row Cycle Delay */ #define AT91_DDRSDRC_TXSNR (0xff << 8) /* Exit self-refresh to non-read */ #define AT91_DDRSDRC_TXSRD (0xff << 16) /* Exit self-refresh to read */ #define AT91_DDRSDRC_TXP (0xf << 24) /* Exit power-down delay */ -#define AT91_DDRSDRC_LPR (AT91_DDRSDRC + 0x18) /* Low Power Register */ +#define AT91_DDRSDRC_LPR 0x18 /* Low Power Register */ #define AT91_DDRSDRC_LPCB (3 << 0) /* Low-power Configurations */ #define AT91_DDRSDRC_LPCB_DISABLE 0 #define AT91_DDRSDRC_LPCB_SELF_REFRESH 1 @@ -80,14 +80,14 @@ #define AT91_DDRSDRC_TIMEOUT_64_CLK_CYCLES (1 << 12) #define AT91_DDRSDRC_TIMEOUT_128_CLK_CYCLES (2 << 12) -#define AT91_DDRSDRC_MDR (AT91_DDRSDRC + 0x1C) /* Memory Device Register */ +#define AT91_DDRSDRC_MDR 0x1C /* Memory Device Register */ #define AT91_DDRSDRC_MD (3 << 0) /* Memory Device Type */ #define AT91_DDRSDRC_MD_SDR 0 #define AT91_DDRSDRC_MD_LOW_POWER_SDR 1 #define AT91_DDRSDRC_MD_DDR 2 #define AT91_DDRSDRC_MD_LOW_POWER_DDR 3 -#define AT91_DDRSDRC_DLLR (AT91_DDRSDRC + 0x20) /* DLL Information Register */ +#define AT91_DDRSDRC_DLLR 0x20 /* DLL Information Register */ #define AT91_DDRSDRC_MDINC (1 << 0) /* Master Delay increment */ #define AT91_DDRSDRC_MDDEC (1 << 1) /* Master Delay decrement */ #define AT91_DDRSDRC_MDOVF (1 << 2) /* Master Delay Overflow */ @@ -98,5 +98,11 @@ #define AT91_DDRSDRC_SDVAL (0xff << 16) /* Slave Delay value */ #define AT91_DDRSDRC_SDCVAL (0xff << 24) /* Slave Delay Correction value */ +/* Register access macros */ +#define at91_ramc_read(num, reg) \ + at91_sys_read(AT91_DDRSDRC##num + reg) +#define at91_ramc_write(num, reg, value) \ + at91_sys_write(AT91_DDRSDRC##num + reg, value) + #endif diff --git a/arch/arm/mach-at91/include/mach/at91sam9260.h b/arch/arm/mach-at91/include/mach/at91sam9260.h index 43c396b9b4cb..4e79036d3b80 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9260.h +++ b/arch/arm/mach-at91/include/mach/at91sam9260.h @@ -84,7 +84,7 @@ * System Peripherals (offset from AT91_BASE_SYS) */ #define AT91_ECC (0xffffe800 - AT91_BASE_SYS) -#define AT91_SDRAMC (0xffffea00 - AT91_BASE_SYS) +#define AT91_SDRAMC0 (0xffffea00 - AT91_BASE_SYS) #define AT91_SMC (0xffffec00 - AT91_BASE_SYS) #define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS) #define AT91_CCFG (0xffffef10 - AT91_BASE_SYS) diff --git a/arch/arm/mach-at91/include/mach/at91sam9261.h b/arch/arm/mach-at91/include/mach/at91sam9261.h index 87de8be17484..2b5618518129 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9261.h +++ b/arch/arm/mach-at91/include/mach/at91sam9261.h @@ -68,7 +68,7 @@ /* * System Peripherals (offset from AT91_BASE_SYS) */ -#define AT91_SDRAMC (0xffffea00 - AT91_BASE_SYS) +#define AT91_SDRAMC0 (0xffffea00 - AT91_BASE_SYS) #define AT91_SMC (0xffffec00 - AT91_BASE_SYS) #define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS) #define AT91_AIC (0xfffff000 - AT91_BASE_SYS) diff --git a/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h b/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h new file mode 100644 index 000000000000..d27b15ba8ebf --- /dev/null +++ b/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h @@ -0,0 +1,130 @@ +/* + * Header file for the Atmel DDR/SDR SDRAM Controller + * + * Copyright (C) 2010 Atmel Corporation + * Nicolas Ferre <nicolas.ferre@atmel.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#ifndef AT91SAM9_DDRSDR_H +#define AT91SAM9_DDRSDR_H + +#define AT91_DDRSDRC_MR 0x00 /* Mode Register */ +#define AT91_DDRSDRC_MODE (0x7 << 0) /* Command Mode */ +#define AT91_DDRSDRC_MODE_NORMAL 0 +#define AT91_DDRSDRC_MODE_NOP 1 +#define AT91_DDRSDRC_MODE_PRECHARGE 2 +#define AT91_DDRSDRC_MODE_LMR 3 +#define AT91_DDRSDRC_MODE_REFRESH 4 +#define AT91_DDRSDRC_MODE_EXT_LMR 5 +#define AT91_DDRSDRC_MODE_DEEP 6 + +#define AT91_DDRSDRC_RTR 0x04 /* Refresh Timer Register */ +#define AT91_DDRSDRC_COUNT (0xfff << 0) /* Refresh Timer Counter */ + +#define AT91_DDRSDRC_CR 0x08 /* Configuration Register */ +#define AT91_DDRSDRC_NC (3 << 0) /* Number of Column Bits */ +#define AT91_DDRSDRC_NC_SDR8 (0 << 0) +#define AT91_DDRSDRC_NC_SDR9 (1 << 0) +#define AT91_DDRSDRC_NC_SDR10 (2 << 0) +#define AT91_DDRSDRC_NC_SDR11 (3 << 0) +#define AT91_DDRSDRC_NC_DDR9 (0 << 0) +#define AT91_DDRSDRC_NC_DDR10 (1 << 0) +#define AT91_DDRSDRC_NC_DDR11 (2 << 0) +#define AT91_DDRSDRC_NC_DDR12 (3 << 0) +#define AT91_DDRSDRC_NR (3 << 2) /* Number of Row Bits */ +#define AT91_DDRSDRC_NR_11 (0 << 2) +#define AT91_DDRSDRC_NR_12 (1 << 2) +#define AT91_DDRSDRC_NR_13 (2 << 2) +#define AT91_DDRSDRC_NR_14 (3 << 2) +#define AT91_DDRSDRC_CAS (7 << 4) /* CAS Latency */ +#define AT91_DDRSDRC_CAS_2 (2 << 4) +#define AT91_DDRSDRC_CAS_3 (3 << 4) +#define AT91_DDRSDRC_CAS_25 (6 << 4) +#define AT91_DDRSDRC_RST_DLL (1 << 7) /* Reset DLL */ +#define AT91_DDRSDRC_DICDS (1 << 8) /* Output impedance control */ +#define AT91_DDRSDRC_DIS_DLL (1 << 9) /* Disable DLL */ +#define AT91_DDRSDRC_OCD (1 << 12) /* Off-Chip Driver */ +#define AT91_DDRSDRC_DQMS (1 << 16) /* Mask Data is Shared */ +#define AT91_DDRSDRC_ACTBST (1 << 18) /* Active Bank X to Burst Stop Read Access Bank Y */ + +#define AT91_DDRSDRC_T0PR 0x0C /* Timing 0 Register */ +#define AT91_DDRSDRC_TRAS (0xf << 0) /* Active to Precharge delay */ +#define AT91_DDRSDRC_TRCD (0xf << 4) /* Row to Column delay */ +#define AT91_DDRSDRC_TWR (0xf << 8) /* Write recovery delay */ +#define AT91_DDRSDRC_TRC (0xf << 12) /* Row cycle delay */ +#define AT91_DDRSDRC_TRP (0xf << 16) /* Row precharge delay */ +#define AT91_DDRSDRC_TRRD (0xf << 20) /* Active BankA to BankB */ +#define AT91_DDRSDRC_TWTR (0x7 << 24) /* Internal Write to Read delay */ +#define AT91_DDRSDRC_RED_WRRD (0x1 << 27) /* Reduce Write to Read Delay */ +#define AT91_DDRSDRC_TMRD (0xf << 28) /* Load mode to active/refresh delay */ + +#define AT91_DDRSDRC_T1PR 0x10 /* Timing 1 Register */ +#define AT91_DDRSDRC_TRFC (0x1f << 0) /* Row Cycle Delay */ +#define AT91_DDRSDRC_TXSNR (0xff << 8) /* Exit self-refresh to non-read */ +#define AT91_DDRSDRC_TXSRD (0xff << 16) /* Exit self-refresh to read */ +#define AT91_DDRSDRC_TXP (0xf << 24) /* Exit power-down delay */ + +#define AT91_DDRSDRC_T2PR 0x14 /* Timing 2 Register */ +#define AT91_DDRSDRC_TXARD (0xf << 0) /* Exit active power down delay to read command in mode "Fast Exit" */ +#define AT91_DDRSDRC_TXARDS (0xf << 4) /* Exit active power down delay to read command in mode "Slow Exit" */ +#define AT91_DDRSDRC_TRPA (0xf << 8) /* Row Precharge All delay */ +#define AT91_DDRSDRC_TRTP (0x7 << 12) /* Read to Precharge delay */ + +#define AT91_DDRSDRC_LPR 0x1C /* Low Power Register */ +#define AT91_DDRSDRC_LPCB (3 << 0) /* Low-power Configurations */ +#define AT91_DDRSDRC_LPCB_DISABLE 0 +#define AT91_DDRSDRC_LPCB_SELF_REFRESH 1 +#define AT91_DDRSDRC_LPCB_POWER_DOWN 2 +#define AT91_DDRSDRC_LPCB_DEEP_POWER_DOWN 3 +#define AT91_DDRSDRC_CLKFR (1 << 2) /* Clock Frozen */ +#define AT91_DDRSDRC_PASR (7 << 4) /* Partial Array Self Refresh */ +#define AT91_DDRSDRC_TCSR (3 << 8) /* Temperature Compensated Self Refresh */ +#define AT91_DDRSDRC_DS (3 << 10) /* Drive Strength */ +#define AT91_DDRSDRC_TIMEOUT (3 << 12) /* Time to define when Low Power Mode is enabled */ +#define AT91_DDRSDRC_TIMEOUT_0_CLK_CYCLES (0 << 12) +#define AT91_DDRSDRC_TIMEOUT_64_CLK_CYCLES (1 << 12) +#define AT91_DDRSDRC_TIMEOUT_128_CLK_CYCLES (2 << 12) +#define AT91_DDRSDRC_APDE (1 << 16) /* Active power down exit time */ +#define AT91_DDRSDRC_UPD_MR (3 << 20) /* Update load mode register and extended mode register */ + +#define AT91_DDRSDRC_MDR 0x20 /* Memory Device Register */ +#define AT91_DDRSDRC_MD (3 << 0) /* Memory Device Type */ +#define AT91_DDRSDRC_MD_SDR 0 +#define AT91_DDRSDRC_MD_LOW_POWER_SDR 1 +#define AT91_DDRSDRC_MD_LOW_POWER_DDR 3 +#define AT91_DDRSDRC_MD_DDR2 6 +#define AT91_DDRSDRC_DBW (1 << 4) /* Data Bus Width */ +#define AT91_DDRSDRC_DBW_32BITS (0 << 4) +#define AT91_DDRSDRC_DBW_16BITS (1 << 4) + +#define AT91_DDRSDRC_DLL 0x24 /* DLL Information Register */ +#define AT91_DDRSDRC_MDINC (1 << 0) /* Master Delay increment */ +#define AT91_DDRSDRC_MDDEC (1 << 1) /* Master Delay decrement */ +#define AT91_DDRSDRC_MDOVF (1 << 2) /* Master Delay Overflow */ +#define AT91_DDRSDRC_MDVAL (0xff << 8) /* Master Delay value */ + +#define AT91_DDRSDRC_HS 0x2C /* High Speed Register */ +#define AT91_DDRSDRC_DIS_ATCP_RD (1 << 2) /* Anticip read access is disabled */ + +#define AT91_DDRSDRC_DELAY(n) (0x30 + (0x4 * (n))) /* Delay I/O Register n */ + +#define AT91_DDRSDRC_WPMR 0xE4 /* Write Protect Mode Register */ +#define AT91_DDRSDRC_WP (1 << 0) /* Write protect enable */ +#define AT91_DDRSDRC_WPKEY (0xffffff << 8) /* Write protect key */ +#define AT91_DDRSDRC_KEY (0x444452 << 8) /* Write protect key = "DDR" */ + +#define AT91_DDRSDRC_WPSR 0xE8 /* Write Protect Status Register */ +#define AT91_DDRSDRC_WPVS (1 << 0) /* Write protect violation status */ +#define AT91_DDRSDRC_WPVSRC (0xffff << 8) /* Write protect violation source */ + +/* Register access macros */ +#define at91_ramc_read(num, reg) \ + at91_sys_read(AT91_DDRSDRC##num + reg) +#define at91_ramc_write(num, reg, value) \ + at91_sys_write(AT91_DDRSDRC##num + reg, value) + +#endif diff --git a/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h b/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h index b7260389f7ca..100f5a592926 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h +++ b/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h @@ -17,7 +17,7 @@ #define AT91SAM9_SDRAMC_H /* SDRAM Controller (SDRAMC) registers */ -#define AT91_SDRAMC_MR (AT91_SDRAMC + 0x00) /* SDRAM Controller Mode Register */ +#define AT91_SDRAMC_MR 0x00 /* SDRAM Controller Mode Register */ #define AT91_SDRAMC_MODE (0xf << 0) /* Command Mode */ #define AT91_SDRAMC_MODE_NORMAL 0 #define AT91_SDRAMC_MODE_NOP 1 @@ -27,10 +27,10 @@ #define AT91_SDRAMC_MODE_EXT_LMR 5 #define AT91_SDRAMC_MODE_DEEP 6 -#define AT91_SDRAMC_TR (AT91_SDRAMC + 0x04) /* SDRAM Controller Refresh Timer Register */ +#define AT91_SDRAMC_TR 0x04 /* SDRAM Controller Refresh Timer Register */ #define AT91_SDRAMC_COUNT (0xfff << 0) /* Refresh Timer Counter */ -#define AT91_SDRAMC_CR (AT91_SDRAMC + 0x08) /* SDRAM Controller Configuration Register */ +#define AT91_SDRAMC_CR 0x08 /* SDRAM Controller Configuration Register */ #define AT91_SDRAMC_NC (3 << 0) /* Number of Column Bits */ #define AT91_SDRAMC_NC_8 (0 << 0) #define AT91_SDRAMC_NC_9 (1 << 0) @@ -57,7 +57,7 @@ #define AT91_SDRAMC_TRAS (0xf << 24) /* Active to Precharge Delay */ #define AT91_SDRAMC_TXSR (0xf << 28) /* Exit Self Refresh to Active Delay */ -#define AT91_SDRAMC_LPR (AT91_SDRAMC + 0x10) /* SDRAM Controller Low Power Register */ +#define AT91_SDRAMC_LPR 0x10 /* SDRAM Controller Low Power Register */ #define AT91_SDRAMC_LPCB (3 << 0) /* Low-power Configurations */ #define AT91_SDRAMC_LPCB_DISABLE 0 #define AT91_SDRAMC_LPCB_SELF_REFRESH 1 @@ -71,16 +71,21 @@ #define AT91_SDRAMC_TIMEOUT_64_CLK_CYCLES (1 << 12) #define AT91_SDRAMC_TIMEOUT_128_CLK_CYCLES (2 << 12) -#define AT91_SDRAMC_IER (AT91_SDRAMC + 0x14) /* SDRAM Controller Interrupt Enable Register */ -#define AT91_SDRAMC_IDR (AT91_SDRAMC + 0x18) /* SDRAM Controller Interrupt Disable Register */ -#define AT91_SDRAMC_IMR (AT91_SDRAMC + 0x1C) /* SDRAM Controller Interrupt Mask Register */ -#define AT91_SDRAMC_ISR (AT91_SDRAMC + 0x20) /* SDRAM Controller Interrupt Status Register */ +#define AT91_SDRAMC_IER 0x14 /* SDRAM Controller Interrupt Enable Register */ +#define AT91_SDRAMC_IDR 0x18 /* SDRAM Controller Interrupt Disable Register */ +#define AT91_SDRAMC_IMR 0x1C /* SDRAM Controller Interrupt Mask Register */ +#define AT91_SDRAMC_ISR 0x20 /* SDRAM Controller Interrupt Status Register */ #define AT91_SDRAMC_RES (1 << 0) /* Refresh Error Status */ -#define AT91_SDRAMC_MDR (AT91_SDRAMC + 0x24) /* SDRAM Memory Device Register */ +#define AT91_SDRAMC_MDR 0x24 /* SDRAM Memory Device Register */ #define AT91_SDRAMC_MD (3 << 0) /* Memory Device Type */ #define AT91_SDRAMC_MD_SDRAM 0 #define AT91_SDRAMC_MD_LOW_POWER_SDRAM 1 +/* Register access macros */ +#define at91_ramc_read(num, reg) \ + at91_sys_read(AT91_SDRAMC##num + reg) +#define at91_ramc_write(num, reg, value) \ + at91_sys_write(AT91_SDRAMC##num + reg, value) #endif diff --git a/arch/arm/mach-at91/include/mach/at91sam9rl.h b/arch/arm/mach-at91/include/mach/at91sam9rl.h index fc2de6c09c86..87ba8517ad98 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9rl.h +++ b/arch/arm/mach-at91/include/mach/at91sam9rl.h @@ -74,7 +74,7 @@ */ #define AT91_DMA (0xffffe600 - AT91_BASE_SYS) #define AT91_ECC (0xffffe800 - AT91_BASE_SYS) -#define AT91_SDRAMC (0xffffea00 - AT91_BASE_SYS) +#define AT91_SDRAMC0 (0xffffea00 - AT91_BASE_SYS) #define AT91_SMC (0xffffec00 - AT91_BASE_SYS) #define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS) #define AT91_CCFG (0xffffef10 - AT91_BASE_SYS) diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h index df2ed848c9f8..58528aa9c8a8 100644 --- a/arch/arm/mach-at91/include/mach/board.h +++ b/arch/arm/mach-at91/include/mach/board.h @@ -44,6 +44,8 @@ /* USB Device */ struct at91_udc_data { u8 vbus_pin; /* high == host powering us */ + u8 vbus_active_low; /* vbus polarity */ + u8 vbus_polled; /* Use polling, not interrupt */ u8 pullup_pin; /* active == D+ pulled up */ u8 pullup_active_low; /* true == pullup_pin is active low */ }; diff --git a/arch/arm/mach-at91/include/mach/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h index 833659d1200a..3bef931d0b1c 100644 --- a/arch/arm/mach-at91/include/mach/cpu.h +++ b/arch/arm/mach-at91/include/mach/cpu.h @@ -52,6 +52,7 @@ static inline unsigned long at91_cpu_fully_identify(void) #define ARCH_EXID_AT91SAM9M11 0x00000001 #define ARCH_EXID_AT91SAM9M10 0x00000002 +#define ARCH_EXID_AT91SAM9G46 0x00000003 #define ARCH_EXID_AT91SAM9G45 0x00000004 static inline unsigned long at91_exid_identify(void) @@ -128,9 +129,18 @@ static inline unsigned long at91cap9_rev_identify(void) #ifdef CONFIG_ARCH_AT91SAM9G45 #define cpu_is_at91sam9g45() (at91_cpu_identify() == ARCH_ID_AT91SAM9G45) #define cpu_is_at91sam9g45es() (at91_cpu_fully_identify() == ARCH_ID_AT91SAM9G45ES) +#define cpu_is_at91sam9m10() (cpu_is_at91sam9g45() && \ + (at91_exid_identify() == ARCH_EXID_AT91SAM9M10)) +#define cpu_is_at91sam9m46() (cpu_is_at91sam9g45() && \ + (at91_exid_identify() == ARCH_EXID_AT91SAM9G46)) +#define cpu_is_at91sam9m11() (cpu_is_at91sam9g45() && \ + (at91_exid_identify() == ARCH_EXID_AT91SAM9M11)) #else #define cpu_is_at91sam9g45() (0) #define cpu_is_at91sam9g45es() (0) +#define cpu_is_at91sam9m10() (0) +#define cpu_is_at91sam9g46() (0) +#define cpu_is_at91sam9m11() (0) #endif #ifdef CONFIG_ARCH_AT91CAP9 diff --git a/arch/arm/mach-at91/include/mach/gpio.h b/arch/arm/mach-at91/include/mach/gpio.h index 04c91e31c9c5..bfdd8ab26dc8 100644 --- a/arch/arm/mach-at91/include/mach/gpio.h +++ b/arch/arm/mach-at91/include/mach/gpio.h @@ -19,6 +19,7 @@ #define PIN_BASE NR_AIC_IRQS #define MAX_GPIO_BANKS 5 +#define NR_BUILTIN_GPIO (PIN_BASE + (MAX_GPIO_BANKS * 32)) /* these pin numbers double as IRQ numbers, like AT91xxx_ID_* values */ diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h index 08322c44df1a..8c87d0c1b8f8 100644 --- a/arch/arm/mach-at91/pm.h +++ b/arch/arm/mach-at91/pm.h @@ -30,14 +30,50 @@ static inline u32 sdram_selfrefresh_enable(void) { u32 saved_lpr, lpr; - saved_lpr = at91_sys_read(AT91_DDRSDRC_LPR); + saved_lpr = at91_ramc_read(0, AT91_DDRSDRC_LPR); lpr = saved_lpr & ~AT91_DDRSDRC_LPCB; - at91_sys_write(AT91_DDRSDRC_LPR, lpr | AT91_DDRSDRC_LPCB_SELF_REFRESH); + at91_ramc_write(0, AT91_DDRSDRC_LPR, lpr | AT91_DDRSDRC_LPCB_SELF_REFRESH); return saved_lpr; } -#define sdram_selfrefresh_disable(saved_lpr) at91_sys_write(AT91_DDRSDRC_LPR, saved_lpr) +#define sdram_selfrefresh_disable(saved_lpr) at91_ramc_write(0, AT91_DDRSDRC_LPR, saved_lpr) + +#elif defined(CONFIG_ARCH_AT91SAM9G45) +#include <mach/at91sam9_ddrsdr.h> + +/* We manage both DDRAM/SDRAM controllers, we need more than one value to + * remember. + */ +static u32 saved_lpr1; + +static inline u32 sdram_selfrefresh_enable(void) +{ + /* Those tow values allow us to delay self-refresh activation + * to the maximum. */ + u32 lpr0, lpr1; + u32 saved_lpr0; + + saved_lpr1 = at91_ramc_read(1, AT91_DDRSDRC_LPR); + lpr1 = saved_lpr1 & ~AT91_DDRSDRC_LPCB; + lpr1 |= AT91_DDRSDRC_LPCB_SELF_REFRESH; + + saved_lpr0 = at91_ramc_read(0, AT91_DDRSDRC_LPR); + lpr0 = saved_lpr0 & ~AT91_DDRSDRC_LPCB; + lpr0 |= AT91_DDRSDRC_LPCB_SELF_REFRESH; + + /* self-refresh mode now */ + at91_ramc_write(0, AT91_DDRSDRC_LPR, lpr0); + at91_ramc_write(1, AT91_DDRSDRC_LPR, lpr1); + + return saved_lpr0; +} + +#define sdram_selfrefresh_disable(saved_lpr0) \ + do { \ + at91_ramc_write(0, AT91_DDRSDRC_LPR, saved_lpr0); \ + at91_ramc_write(1, AT91_DDRSDRC_LPR, saved_lpr1); \ + } while (0) #else #include <mach/at91sam9_sdramc.h> @@ -47,7 +83,6 @@ static inline u32 sdram_selfrefresh_enable(void) * FIXME either or both the SDRAM controllers (EB0, EB1) might be in use; * handle those cases both here and in the Suspend-To-RAM support. */ -#define AT91_SDRAMC AT91_SDRAMC0 #warning Assuming EB1 SDRAM controller is *NOT* used #endif @@ -55,13 +90,13 @@ static inline u32 sdram_selfrefresh_enable(void) { u32 saved_lpr, lpr; - saved_lpr = at91_sys_read(AT91_SDRAMC_LPR); + saved_lpr = at91_ramc_read(0, AT91_SDRAMC_LPR); lpr = saved_lpr & ~AT91_SDRAMC_LPCB; - at91_sys_write(AT91_SDRAMC_LPR, lpr | AT91_SDRAMC_LPCB_SELF_REFRESH); + at91_ramc_write(0, AT91_SDRAMC_LPR, lpr | AT91_SDRAMC_LPCB_SELF_REFRESH); return saved_lpr; } -#define sdram_selfrefresh_disable(saved_lpr) at91_sys_write(AT91_SDRAMC_LPR, saved_lpr) +#define sdram_selfrefresh_disable(saved_lpr) at91_ramc_write(0, AT91_SDRAMC_LPR, saved_lpr) #endif diff --git a/arch/arm/mach-at91/pm_slowclock.S b/arch/arm/mach-at91/pm_slowclock.S index 9c5b48e68a71..b6b00a1f6125 100644 --- a/arch/arm/mach-at91/pm_slowclock.S +++ b/arch/arm/mach-at91/pm_slowclock.S @@ -16,10 +16,12 @@ #include <mach/hardware.h> #include <mach/at91_pmc.h> -#ifdef CONFIG_ARCH_AT91RM9200 +#if defined(CONFIG_ARCH_AT91RM9200) #include <mach/at91rm9200_mc.h> #elif defined(CONFIG_ARCH_AT91CAP9) #include <mach/at91cap9_ddrsdr.h> +#elif defined(CONFIG_ARCH_AT91SAM9G45) +#include <mach/at91sam9_ddrsdr.h> #else #include <mach/at91sam9_sdramc.h> #endif @@ -30,7 +32,6 @@ * FIXME either or both the SDRAM controllers (EB0, EB1) might be in use; * handle those cases both here and in the Suspend-To-RAM support. */ -#define AT91_SDRAMC AT91_SDRAMC0 #warning Assuming EB1 SDRAM controller is *NOT* used #endif @@ -113,12 +114,14 @@ ENTRY(at91_slow_clock) /* * Register usage: * R1 = Base address of AT91_PMC - * R2 = Base address of AT91_SDRAMC (or AT91_SYS on AT91RM9200) + * R2 = Base address of RAM Controller (SDRAM, DDRSDR, or AT91_SYS) * R3 = temporary register * R4 = temporary register + * R5 = Base address of second RAM Controller or 0 if not present */ ldr r1, .at91_va_base_pmc ldr r2, .at91_va_base_sdramc + ldr r5, .at91_va_base_ramc1 /* Drain write buffer */ mcr p15, 0, r0, c7, c10, 4 @@ -127,20 +130,33 @@ ENTRY(at91_slow_clock) /* Put SDRAM in self-refresh mode */ mov r3, #1 str r3, [r2, #AT91_SDRAMC_SRR] -#elif defined(CONFIG_ARCH_AT91CAP9) - /* Enable SDRAM self-refresh mode */ - ldr r3, [r2, #AT91_DDRSDRC_LPR - AT91_DDRSDRC] - str r3, .saved_sam9_lpr +#elif defined(CONFIG_ARCH_AT91CAP9) \ + || defined(CONFIG_ARCH_AT91SAM9G45) - mov r3, #AT91_DDRSDRC_LPCB_SELF_REFRESH - str r3, [r2, #AT91_DDRSDRC_LPR - AT91_DDRSDRC] + /* prepare for DDRAM self-refresh mode */ + ldr r3, [r2, #AT91_DDRSDRC_LPR] + str r3, .saved_sam9_lpr + bic r3, #AT91_DDRSDRC_LPCB + orr r3, #AT91_DDRSDRC_LPCB_SELF_REFRESH + + /* figure out if we use the second ram controller */ + cmp r5, #0 + ldrne r4, [r5, #AT91_DDRSDRC_LPR] + strne r4, .saved_sam9_lpr1 + bicne r4, #AT91_DDRSDRC_LPCB + orrne r4, #AT91_DDRSDRC_LPCB_SELF_REFRESH + + /* Enable DDRAM self-refresh mode */ + str r3, [r2, #AT91_DDRSDRC_LPR] + strne r4, [r5, #AT91_DDRSDRC_LPR] #else /* Enable SDRAM self-refresh mode */ - ldr r3, [r2, #AT91_SDRAMC_LPR - AT91_SDRAMC] + ldr r3, [r2, #AT91_SDRAMC_LPR] str r3, .saved_sam9_lpr - mov r3, #AT91_SDRAMC_LPCB_SELF_REFRESH - str r3, [r2, #AT91_SDRAMC_LPR - AT91_SDRAMC] + bic r3, #AT91_SDRAMC_LPCB + orr r3, #AT91_SDRAMC_LPCB_SELF_REFRESH + str r3, [r2, #AT91_SDRAMC_LPR] #endif /* Save Master clock setting */ @@ -247,14 +263,21 @@ ENTRY(at91_slow_clock) #ifdef CONFIG_ARCH_AT91RM9200 /* Do nothing - self-refresh is automatically disabled. */ -#elif defined(CONFIG_ARCH_AT91CAP9) - /* Restore LPR on AT91CAP9 */ +#elif defined(CONFIG_ARCH_AT91CAP9) \ + || defined(CONFIG_ARCH_AT91SAM9G45) + /* Restore LPR on AT91 with DDRAM */ ldr r3, .saved_sam9_lpr - str r3, [r2, #AT91_DDRSDRC_LPR - AT91_DDRSDRC] + str r3, [r2, #AT91_DDRSDRC_LPR] + + /* if we use the second ram controller */ + cmp r5, #0 + ldrne r4, .saved_sam9_lpr1 + strne r4, [r5, #AT91_DDRSDRC_LPR] + #else - /* Restore LPR on AT91SAM9 */ + /* Restore LPR on AT91 with SDRAM */ ldr r3, .saved_sam9_lpr - str r3, [r2, #AT91_SDRAMC_LPR - AT91_SDRAMC] + str r3, [r2, #AT91_SDRAMC_LPR] #endif /* Restore registers, and return */ @@ -273,18 +296,29 @@ ENTRY(at91_slow_clock) .saved_sam9_lpr: .word 0 +.saved_sam9_lpr1: + .word 0 + .at91_va_base_pmc: .word AT91_VA_BASE_SYS + AT91_PMC #ifdef CONFIG_ARCH_AT91RM9200 .at91_va_base_sdramc: .word AT91_VA_BASE_SYS -#elif defined(CONFIG_ARCH_AT91CAP9) +#elif defined(CONFIG_ARCH_AT91CAP9) \ + || defined(CONFIG_ARCH_AT91SAM9G45) .at91_va_base_sdramc: - .word AT91_VA_BASE_SYS + AT91_DDRSDRC + .word AT91_VA_BASE_SYS + AT91_DDRSDRC0 #else .at91_va_base_sdramc: - .word AT91_VA_BASE_SYS + AT91_SDRAMC + .word AT91_VA_BASE_SYS + AT91_SDRAMC0 +#endif + +.at91_va_base_ramc1: +#if defined(CONFIG_ARCH_AT91SAM9G45) + .word AT91_VA_BASE_SYS + AT91_DDRSDRC1 +#else + .word 0 #endif ENTRY(at91_slow_clock_sz) diff --git a/arch/arm/mach-bcmring/core.c b/arch/arm/mach-bcmring/core.c index 72e405df0fb0..d3f959e92b2d 100644 --- a/arch/arm/mach-bcmring/core.c +++ b/arch/arm/mach-bcmring/core.c @@ -91,14 +91,23 @@ static struct clk uart_clk = { .parent = &pll1_clk, }; +static struct clk dummy_apb_pclk = { + .name = "BUSCLK", + .type = CLK_TYPE_PRIMARY, + .mode = CLK_MODE_XTAL, +}; + static struct clk_lookup lookups[] = { - { /* UART0 */ - .dev_id = "uarta", - .clk = &uart_clk, - }, { /* UART1 */ - .dev_id = "uartb", - .clk = &uart_clk, - } + { /* Bus clock */ + .con_id = "apb_pclk", + .clk = &dummy_apb_pclk, + }, { /* UART0 */ + .dev_id = "uarta", + .clk = &uart_clk, + }, { /* UART1 */ + .dev_id = "uartb", + .clk = &uart_clk, + } }; static struct amba_device *amba_devs[] __initdata = { diff --git a/arch/arm/mach-clps711x/Kconfig b/arch/arm/mach-clps711x/Kconfig index dbaae5f746a1..eb34bd1251d4 100644 --- a/arch/arm/mach-clps711x/Kconfig +++ b/arch/arm/mach-clps711x/Kconfig @@ -30,7 +30,6 @@ config ARCH_CLEP7312 config ARCH_EDB7211 bool "EDB7211" select ISA - select ARCH_DISCONTIGMEM_ENABLE select ARCH_SPARSEMEM_ENABLE select ARCH_SELECT_MEMORY_MODEL help diff --git a/arch/arm/mach-clps711x/clep7312.c b/arch/arm/mach-clps711x/clep7312.c index 09fb57e45213..3c3bf45039ff 100644 --- a/arch/arm/mach-clps711x/clep7312.c +++ b/arch/arm/mach-clps711x/clep7312.c @@ -32,7 +32,6 @@ fixup_clep7312(struct machine_desc *desc, struct tag *tags, mi->nr_banks=1; mi->bank[0].start = 0xc0000000; mi->bank[0].size = 0x01000000; - mi->bank[0].node = 0; } diff --git a/arch/arm/mach-clps711x/edb7211-arch.c b/arch/arm/mach-clps711x/edb7211-arch.c index dc81cc68595d..4a7a2322979a 100644 --- a/arch/arm/mach-clps711x/edb7211-arch.c +++ b/arch/arm/mach-clps711x/edb7211-arch.c @@ -18,6 +18,7 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/init.h> +#include <linux/memblock.h> #include <linux/types.h> #include <linux/string.h> @@ -29,6 +30,12 @@ extern void edb7211_map_io(void); +/* Reserve screen memory region at the start of main system memory. */ +static void __init edb7211_reserve(void) +{ + memblock_reserve(PHYS_OFFSET, 0x00020000); +} + static void __init fixup_edb7211(struct machine_desc *desc, struct tag *tags, char **cmdline, struct meminfo *mi) @@ -43,10 +50,8 @@ fixup_edb7211(struct machine_desc *desc, struct tag *tags, */ mi->bank[0].start = 0xc0000000; mi->bank[0].size = 8*1024*1024; - mi->bank[0].node = 0; mi->bank[1].start = 0xc1000000; mi->bank[1].size = 8*1024*1024; - mi->bank[1].node = 1; mi->nr_banks = 2; } @@ -57,6 +62,7 @@ MACHINE_START(EDB7211, "CL-EDB7211 (EP7211 eval board)") .boot_params = 0xc0020100, /* 0xc0000000 - 0xc001ffff can be video RAM */ .fixup = fixup_edb7211, .map_io = edb7211_map_io, + .reserve = edb7211_reserve, .init_irq = clps711x_init_irq, .timer = &clps711x_timer, MACHINE_END diff --git a/arch/arm/mach-clps711x/fortunet.c b/arch/arm/mach-clps711x/fortunet.c index 7430e4049d87..a696099aa4f8 100644 --- a/arch/arm/mach-clps711x/fortunet.c +++ b/arch/arm/mach-clps711x/fortunet.c @@ -39,7 +39,6 @@ struct meminfo memmap = { { .start = 0xC0000000, .size = 0x01000000, - .node = 0 }, }, }; diff --git a/arch/arm/mach-clps711x/include/mach/memory.h b/arch/arm/mach-clps711x/include/mach/memory.h index f70d52be48a2..f45c8e892cb5 100644 --- a/arch/arm/mach-clps711x/include/mach/memory.h +++ b/arch/arm/mach-clps711x/include/mach/memory.h @@ -20,7 +20,6 @@ #ifndef __ASM_ARCH_MEMORY_H #define __ASM_ARCH_MEMORY_H - /* * Physical DRAM offset. */ @@ -72,7 +71,6 @@ * node 2: 0xd0000000 - 0xd7ffffff * node 3: 0xd8000000 - 0xdfffffff */ -#define NODE_MEM_SIZE_BITS 24 #define SECTION_SIZE_BITS 24 #define MAX_PHYSMEM_BITS 32 diff --git a/arch/arm/mach-davinci/include/mach/memory.h b/arch/arm/mach-davinci/include/mach/memory.h index a91edfb8beea..22eb97c1c30b 100644 --- a/arch/arm/mach-davinci/include/mach/memory.h +++ b/arch/arm/mach-davinci/include/mach/memory.h @@ -48,19 +48,16 @@ * below 128M */ static inline void -__arch_adjust_zones(int node, unsigned long *size, unsigned long *holes) +__arch_adjust_zones(unsigned long *size, unsigned long *holes) { unsigned int sz = (128<<20) >> PAGE_SHIFT; - if (node != 0) - sz = 0; - size[1] = size[0] - sz; size[0] = sz; } -#define arch_adjust_zones(node, zone_size, holes) \ - if ((meminfo.bank[0].size >> 20) > 128) __arch_adjust_zones(node, zone_size, holes) +#define arch_adjust_zones(zone_size, holes) \ + if ((meminfo.bank[0].size >> 20) > 128) __arch_adjust_zones(zone_size, holes) #define ISA_DMA_THRESHOLD (PHYS_OFFSET + (128<<20) - 1) #define MAX_DMA_ADDRESS (PAGE_OFFSET + (128<<20)) diff --git a/arch/arm/mach-ep93xx/adssphere.c b/arch/arm/mach-ep93xx/adssphere.c index 3a1a855bfdca..f744f676783f 100644 --- a/arch/arm/mach-ep93xx/adssphere.c +++ b/arch/arm/mach-ep93xx/adssphere.c @@ -13,7 +13,6 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> -#include <linux/mtd/physmap.h> #include <mach/hardware.h> @@ -21,26 +20,6 @@ #include <asm/mach/arch.h> -static struct physmap_flash_data adssphere_flash_data = { - .width = 4, -}; - -static struct resource adssphere_flash_resource = { - .start = EP93XX_CS6_PHYS_BASE, - .end = EP93XX_CS6_PHYS_BASE + SZ_32M - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device adssphere_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &adssphere_flash_data, - }, - .num_resources = 1, - .resource = &adssphere_flash_resource, -}; - static struct ep93xx_eth_data __initdata adssphere_eth_data = { .phy_id = 1, }; @@ -48,8 +27,7 @@ static struct ep93xx_eth_data __initdata adssphere_eth_data = { static void __init adssphere_init_machine(void) { ep93xx_init_devices(); - platform_device_register(&adssphere_flash); - + ep93xx_register_flash(4, EP93XX_CS6_PHYS_BASE, SZ_32M); ep93xx_register_eth(&adssphere_eth_data, 1); } diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c index e29bdef9b2e2..7f3039761d91 100644 --- a/arch/arm/mach-ep93xx/clock.c +++ b/arch/arm/mach-ep93xx/clock.c @@ -185,7 +185,7 @@ static struct clk_lookup clocks[] = { INIT_CK(NULL, "pll1", &clk_pll1), INIT_CK(NULL, "fclk", &clk_f), INIT_CK(NULL, "hclk", &clk_h), - INIT_CK(NULL, "pclk", &clk_p), + INIT_CK(NULL, "apb_pclk", &clk_p), INIT_CK(NULL, "pll2", &clk_pll2), INIT_CK("ep93xx-ohci", NULL, &clk_usb_host), INIT_CK("ep93xx-keypad", NULL, &clk_keypad), diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index 9092677f63eb..8e37a045188c 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -29,6 +29,7 @@ #include <linux/termios.h> #include <linux/amba/bus.h> #include <linux/amba/serial.h> +#include <linux/mtd/physmap.h> #include <linux/i2c.h> #include <linux/i2c-gpio.h> #include <linux/spi/spi.h> @@ -215,8 +216,8 @@ void ep93xx_devcfg_set_clear(unsigned int set_bits, unsigned int clear_bits) spin_lock_irqsave(&syscon_swlock, flags); val = __raw_readl(EP93XX_SYSCON_DEVCFG); - val |= set_bits; val &= ~clear_bits; + val |= set_bits; __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK); __raw_writel(val, EP93XX_SYSCON_DEVCFG); @@ -348,6 +349,43 @@ static struct platform_device ep93xx_ohci_device = { /************************************************************************* + * EP93xx physmap'ed flash + *************************************************************************/ +static struct physmap_flash_data ep93xx_flash_data; + +static struct resource ep93xx_flash_resource = { + .flags = IORESOURCE_MEM, +}; + +static struct platform_device ep93xx_flash = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &ep93xx_flash_data, + }, + .num_resources = 1, + .resource = &ep93xx_flash_resource, +}; + +/** + * ep93xx_register_flash() - Register the external flash device. + * @width: bank width in octets + * @start: resource start address + * @size: resource size + */ +void __init ep93xx_register_flash(unsigned int width, + resource_size_t start, resource_size_t size) +{ + ep93xx_flash_data.width = width; + + ep93xx_flash_resource.start = start; + ep93xx_flash_resource.end = start + size - 1; + + platform_device_register(&ep93xx_flash); +} + + +/************************************************************************* * EP93xx ethernet peripheral handling *************************************************************************/ static struct ep93xx_eth_data ep93xx_eth_data; @@ -620,6 +658,11 @@ static struct platform_device ep93xx_fb_device = { .resource = ep93xx_fb_resource, }; +static struct platform_device ep93xx_bl_device = { + .name = "ep93xx-bl", + .id = -1, +}; + /** * ep93xx_register_fb - Register the framebuffer platform device. * @data: platform specific framebuffer configuration (__initdata) @@ -628,6 +671,7 @@ void __init ep93xx_register_fb(struct ep93xxfb_mach_info *data) { ep93xxfb_data = *data; platform_device_register(&ep93xx_fb_device); + platform_device_register(&ep93xx_bl_device); } diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c index 3884182cd362..c2ce9034ba87 100644 --- a/arch/arm/mach-ep93xx/edb93xx.c +++ b/arch/arm/mach-ep93xx/edb93xx.c @@ -27,7 +27,6 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> -#include <linux/mtd/physmap.h> #include <linux/gpio.h> #include <linux/i2c.h> #include <linux/i2c-gpio.h> @@ -38,39 +37,13 @@ #include <asm/mach/arch.h> -static struct physmap_flash_data edb93xx_flash_data; - -static struct resource edb93xx_flash_resource = { - .flags = IORESOURCE_MEM, -}; - -static struct platform_device edb93xx_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &edb93xx_flash_data, - }, - .num_resources = 1, - .resource = &edb93xx_flash_resource, -}; - -static void __init __edb93xx_register_flash(unsigned int width, - resource_size_t start, resource_size_t size) -{ - edb93xx_flash_data.width = width; - edb93xx_flash_resource.start = start; - edb93xx_flash_resource.end = start + size - 1; - - platform_device_register(&edb93xx_flash); -} - static void __init edb93xx_register_flash(void) { if (machine_is_edb9307() || machine_is_edb9312() || machine_is_edb9315()) { - __edb93xx_register_flash(4, EP93XX_CS6_PHYS_BASE, SZ_32M); + ep93xx_register_flash(4, EP93XX_CS6_PHYS_BASE, SZ_32M); } else { - __edb93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_16M); + ep93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_16M); } } diff --git a/arch/arm/mach-ep93xx/gesbc9312.c b/arch/arm/mach-ep93xx/gesbc9312.c index a809618e9f05..d97168c0ba33 100644 --- a/arch/arm/mach-ep93xx/gesbc9312.c +++ b/arch/arm/mach-ep93xx/gesbc9312.c @@ -13,7 +13,6 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> -#include <linux/mtd/physmap.h> #include <mach/hardware.h> @@ -21,26 +20,6 @@ #include <asm/mach/arch.h> -static struct physmap_flash_data gesbc9312_flash_data = { - .width = 4, -}; - -static struct resource gesbc9312_flash_resource = { - .start = EP93XX_CS6_PHYS_BASE, - .end = EP93XX_CS6_PHYS_BASE + SZ_8M - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device gesbc9312_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &gesbc9312_flash_data, - }, - .num_resources = 1, - .resource = &gesbc9312_flash_resource, -}; - static struct ep93xx_eth_data __initdata gesbc9312_eth_data = { .phy_id = 1, }; @@ -48,8 +27,7 @@ static struct ep93xx_eth_data __initdata gesbc9312_eth_data = { static void __init gesbc9312_init_machine(void) { ep93xx_init_devices(); - platform_device_register(&gesbc9312_flash); - + ep93xx_register_flash(4, EP93XX_CS6_PHYS_BASE, SZ_8M); ep93xx_register_eth(&gesbc9312_eth_data, 0); } diff --git a/arch/arm/mach-ep93xx/include/mach/platform.h b/arch/arm/mach-ep93xx/include/mach/platform.h index 9a4413dd44bb..a6c09176334c 100644 --- a/arch/arm/mach-ep93xx/include/mach/platform.h +++ b/arch/arm/mach-ep93xx/include/mach/platform.h @@ -43,6 +43,9 @@ static inline void ep93xx_devcfg_clear_bits(unsigned int bits) unsigned int ep93xx_chip_revision(void); +void ep93xx_register_flash(unsigned int width, + resource_size_t start, resource_size_t size); + void ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr); void ep93xx_register_i2c(struct i2c_gpio_platform_data *data, struct i2c_board_info *devices, int num); diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c index 1cc911b4efa6..2ba776320a82 100644 --- a/arch/arm/mach-ep93xx/micro9.c +++ b/arch/arm/mach-ep93xx/micro9.c @@ -14,7 +14,6 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> -#include <linux/mtd/physmap.h> #include <linux/io.h> #include <mach/hardware.h> @@ -31,31 +30,6 @@ * Micro9-Lite uses a separate MTD map driver for flash support * Micro9-Slim has up to 64MB of either 32-bit or 16-bit flash on CS1 *************************************************************************/ -static struct physmap_flash_data micro9_flash_data; - -static struct resource micro9_flash_resource = { - .start = EP93XX_CS1_PHYS_BASE, - .end = EP93XX_CS1_PHYS_BASE + SZ_64M - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device micro9_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = µ9_flash_data, - }, - .num_resources = 1, - .resource = µ9_flash_resource, -}; - -static void __init __micro9_register_flash(unsigned int width) -{ - micro9_flash_data.width = width; - - platform_device_register(µ9_flash); -} - static unsigned int __init micro9_detect_bootwidth(void) { u32 v; @@ -70,10 +44,17 @@ static unsigned int __init micro9_detect_bootwidth(void) static void __init micro9_register_flash(void) { + unsigned int width; + if (machine_is_micro9()) - __micro9_register_flash(4); + width = 4; else if (machine_is_micro9m() || machine_is_micro9s()) - __micro9_register_flash(micro9_detect_bootwidth()); + width = micro9_detect_bootwidth(); + else + width = 0; + + if (width) + ep93xx_register_flash(width, EP93XX_CS1_PHYS_BASE, SZ_64M); } diff --git a/arch/arm/mach-ep93xx/simone.c b/arch/arm/mach-ep93xx/simone.c index 388aec95f60e..5dded5884133 100644 --- a/arch/arm/mach-ep93xx/simone.c +++ b/arch/arm/mach-ep93xx/simone.c @@ -18,7 +18,6 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> -#include <linux/mtd/physmap.h> #include <linux/gpio.h> #include <linux/i2c.h> #include <linux/i2c-gpio.h> @@ -29,26 +28,6 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> -static struct physmap_flash_data simone_flash_data = { - .width = 2, -}; - -static struct resource simone_flash_resource = { - .start = EP93XX_CS6_PHYS_BASE, - .end = EP93XX_CS6_PHYS_BASE + SZ_8M - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device simone_flash = { - .name = "physmap-flash", - .id = 0, - .num_resources = 1, - .resource = &simone_flash_resource, - .dev = { - .platform_data = &simone_flash_data, - }, -}; - static struct ep93xx_eth_data __initdata simone_eth_data = { .phy_id = 1, }; @@ -77,8 +56,7 @@ static struct i2c_board_info __initdata simone_i2c_board_info[] = { static void __init simone_init_machine(void) { ep93xx_init_devices(); - - platform_device_register(&simone_flash); + ep93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_8M); ep93xx_register_eth(&simone_eth_data, 1); ep93xx_register_fb(&simone_fb_info); ep93xx_register_i2c(&simone_i2c_gpio_data, simone_i2c_board_info, diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c index ae7319e588c7..93aeab8af705 100644 --- a/arch/arm/mach-ep93xx/ts72xx.c +++ b/arch/arm/mach-ep93xx/ts72xx.c @@ -17,7 +17,6 @@ #include <linux/platform_device.h> #include <linux/io.h> #include <linux/m48t86.h> -#include <linux/mtd/physmap.h> #include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> @@ -173,31 +172,13 @@ static struct platform_device ts72xx_nand_flash = { }; -/************************************************************************* - * NOR flash (TS-7200 only) - *************************************************************************/ -static struct physmap_flash_data ts72xx_nor_data = { - .width = 2, -}; - -static struct resource ts72xx_nor_resource = { - .start = EP93XX_CS6_PHYS_BASE, - .end = EP93XX_CS6_PHYS_BASE + SZ_16M - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device ts72xx_nor_flash = { - .name = "physmap-flash", - .id = 0, - .dev.platform_data = &ts72xx_nor_data, - .resource = &ts72xx_nor_resource, - .num_resources = 1, -}; - static void __init ts72xx_register_flash(void) { + /* + * TS7200 has NOR flash all other TS72xx board have NAND flash. + */ if (board_is_ts7200()) { - platform_device_register(&ts72xx_nor_flash); + ep93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_16M); } else { resource_size_t start; diff --git a/arch/arm/mach-integrator/common.h b/arch/arm/mach-integrator/common.h new file mode 100644 index 000000000000..5f96e1518aa9 --- /dev/null +++ b/arch/arm/mach-integrator/common.h @@ -0,0 +1 @@ +void integrator_reserve(void); diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c index b02cfc06e0ae..8f4fb6d638f7 100644 --- a/arch/arm/mach-integrator/core.c +++ b/arch/arm/mach-integrator/core.c @@ -14,6 +14,7 @@ #include <linux/spinlock.h> #include <linux/interrupt.h> #include <linux/irq.h> +#include <linux/memblock.h> #include <linux/sched.h> #include <linux/smp.h> #include <linux/termios.h> @@ -30,6 +31,7 @@ #include <asm/system.h> #include <asm/leds.h> #include <asm/mach/time.h> +#include <asm/pgtable.h> static struct amba_pl010_data integrator_uart_data; @@ -119,8 +121,13 @@ static struct clk uartclk = { .rate = 14745600, }; +static struct clk dummy_apb_pclk; + static struct clk_lookup lookups[] = { - { /* UART0 */ + { /* Bus clock */ + .con_id = "apb_pclk", + .clk = &dummy_apb_pclk, + }, { /* UART0 */ .dev_id = "mb:16", .clk = &uartclk, }, { /* UART1 */ @@ -215,3 +222,13 @@ void cm_control(u32 mask, u32 set) } EXPORT_SYMBOL(cm_control); + +/* + * We need to stop things allocating the low memory; ideally we need a + * better implementation of GFP_DMA which does not assume that DMA-able + * memory starts at zero. + */ +void __init integrator_reserve(void) +{ + memblock_reserve(PHYS_OFFSET, __pa(swapper_pg_dir) - PHYS_OFFSET); +} diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c index 227cf4d05088..6ab5a03ab9d8 100644 --- a/arch/arm/mach-integrator/integrator_ap.c +++ b/arch/arm/mach-integrator/integrator_ap.c @@ -48,6 +48,8 @@ #include <asm/mach/map.h> #include <asm/mach/time.h> +#include "common.h" + /* * All IO addresses are mapped onto VA 0xFFFx.xxxx, where x.xxxx * is the (PA >> 12). @@ -502,6 +504,7 @@ MACHINE_START(INTEGRATOR, "ARM-Integrator") .io_pg_offst = ((0xf1600000) >> 18) & 0xfffc, .boot_params = 0x00000100, .map_io = ap_map_io, + .reserve = integrator_reserve, .init_irq = ap_init_irq, .timer = &ap_timer, .init_machine = ap_init, diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c index cde57b2b83b5..05db40e3c4f7 100644 --- a/arch/arm/mach-integrator/integrator_cp.c +++ b/arch/arm/mach-integrator/integrator_cp.c @@ -43,6 +43,8 @@ #include <plat/timer-sp.h> +#include "common.h" + #define INTCP_PA_FLASH_BASE 0x24000000 #define INTCP_FLASH_SIZE SZ_32M @@ -601,6 +603,7 @@ MACHINE_START(CINTEGRATOR, "ARM-IntegratorCP") .io_pg_offst = ((0xf1600000) >> 18) & 0xfffc, .boot_params = 0x00000100, .map_io = intcp_map_io, + .reserve = integrator_reserve, .init_irq = intcp_init_irq, .timer = &cp_timer, .init_machine = intcp_init, diff --git a/arch/arm/mach-iop13xx/include/mach/memory.h b/arch/arm/mach-iop13xx/include/mach/memory.h index 25b1da9a5035..7415e4338651 100644 --- a/arch/arm/mach-iop13xx/include/mach/memory.h +++ b/arch/arm/mach-iop13xx/include/mach/memory.h @@ -69,6 +69,4 @@ static inline unsigned long __lbus_to_virt(dma_addr_t x) #endif /* CONFIG_ARCH_IOP13XX */ #endif /* !ASSEMBLY */ -#define PFN_TO_NID(addr) (0) - #endif diff --git a/arch/arm/mach-ixp4xx/common-pci.c b/arch/arm/mach-ixp4xx/common-pci.c index e3181534c7f9..333d04c53650 100644 --- a/arch/arm/mach-ixp4xx/common-pci.c +++ b/arch/arm/mach-ixp4xx/common-pci.c @@ -348,7 +348,7 @@ int dma_needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size) * This is really ugly and we need a better way of specifying * DMA-capable regions of memory. */ -void __init ixp4xx_adjust_zones(int node, unsigned long *zone_size, +void __init ixp4xx_adjust_zones(unsigned long *zone_size, unsigned long *zhole_size) { unsigned int sz = SZ_64M >> PAGE_SHIFT; @@ -356,7 +356,7 @@ void __init ixp4xx_adjust_zones(int node, unsigned long *zone_size, /* * Only adjust if > 64M on current system */ - if (node || (zone_size[0] <= sz)) + if (zone_size[0] <= sz) return; zone_size[1] = zone_size[0] - sz; diff --git a/arch/arm/mach-ixp4xx/include/mach/memory.h b/arch/arm/mach-ixp4xx/include/mach/memory.h index 98f5e5e20980..0136eaa29224 100644 --- a/arch/arm/mach-ixp4xx/include/mach/memory.h +++ b/arch/arm/mach-ixp4xx/include/mach/memory.h @@ -16,10 +16,10 @@ #if !defined(__ASSEMBLY__) && defined(CONFIG_PCI) -void ixp4xx_adjust_zones(int node, unsigned long *size, unsigned long *holes); +void ixp4xx_adjust_zones(unsigned long *size, unsigned long *holes); -#define arch_adjust_zones(node, size, holes) \ - ixp4xx_adjust_zones(node, size, holes) +#define arch_adjust_zones(size, holes) \ + ixp4xx_adjust_zones(size, holes) #define ISA_DMA_THRESHOLD (SZ_64M - 1) #define MAX_DMA_ADDRESS (PAGE_OFFSET + SZ_64M) diff --git a/arch/arm/mach-lh7a40x/include/mach/memory.h b/arch/arm/mach-lh7a40x/include/mach/memory.h index 189d20e543e7..edb8f5faf5d5 100644 --- a/arch/arm/mach-lh7a40x/include/mach/memory.h +++ b/arch/arm/mach-lh7a40x/include/mach/memory.h @@ -19,50 +19,6 @@ */ #define PHYS_OFFSET UL(0xc0000000) -#ifdef CONFIG_DISCONTIGMEM - -/* - * Given a kernel address, find the home node of the underlying memory. - */ - -# ifdef CONFIG_LH7A40X_ONE_BANK_PER_NODE -# define KVADDR_TO_NID(addr) \ - ( ((((unsigned long) (addr) - PAGE_OFFSET) >> 24) & 1)\ - | ((((unsigned long) (addr) - PAGE_OFFSET) >> 25) & ~1)) -# else /* 2 banks per node */ -# define KVADDR_TO_NID(addr) \ - (((unsigned long) (addr) - PAGE_OFFSET) >> 26) -# endif - -/* - * Given a page frame number, convert it to a node id. - */ - -# ifdef CONFIG_LH7A40X_ONE_BANK_PER_NODE -# define PFN_TO_NID(pfn) \ - (((((pfn) - PHYS_PFN_OFFSET) >> (24 - PAGE_SHIFT)) & 1)\ - | ((((pfn) - PHYS_PFN_OFFSET) >> (25 - PAGE_SHIFT)) & ~1)) -# else /* 2 banks per node */ -# define PFN_TO_NID(pfn) \ - (((pfn) - PHYS_PFN_OFFSET) >> (26 - PAGE_SHIFT)) -#endif - -/* - * Given a kaddr, LOCAL_MEM_MAP finds the owning node of the memory - * and returns the index corresponding to the appropriate page in the - * node's mem_map. - */ - -# ifdef CONFIG_LH7A40X_ONE_BANK_PER_NODE -# define LOCAL_MAP_NR(addr) \ - (((unsigned long)(addr) & 0x003fffff) >> PAGE_SHIFT) -# else /* 2 banks per node */ -# define LOCAL_MAP_NR(addr) \ - (((unsigned long)(addr) & 0x01ffffff) >> PAGE_SHIFT) -# endif - -#endif - /* * Sparsemem version of the above */ diff --git a/arch/arm/mach-msm/board-trout.c b/arch/arm/mach-msm/board-trout.c index dca5a5f062dc..e69a1502e4e8 100644 --- a/arch/arm/mach-msm/board-trout.c +++ b/arch/arm/mach-msm/board-trout.c @@ -50,7 +50,6 @@ static void __init trout_fixup(struct machine_desc *desc, struct tag *tags, { mi->nr_banks = 1; mi->bank[0].start = PHYS_OFFSET; - mi->bank[0].node = PHYS_TO_NID(PHYS_OFFSET); mi->bank[0].size = (101*1024*1024); } diff --git a/arch/arm/mach-nomadik/clock.c b/arch/arm/mach-nomadik/clock.c index f035f4185274..89f793adf776 100644 --- a/arch/arm/mach-nomadik/clock.c +++ b/arch/arm/mach-nomadik/clock.c @@ -53,6 +53,10 @@ static struct clk clk_default; } static struct clk_lookup lookups[] = { + { + .con_id = "apb_pclk", + .clk = &clk_default, + }, CLK(&clk_24, "mtu0"), CLK(&clk_24, "mtu1"), CLK(&clk_48, "uart0"), diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index fdd1dd53fa9c..0a9d61d2d229 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -301,6 +301,7 @@ MACHINE_START(AMS_DELTA, "Amstrad E3 (Delta)") .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc, .boot_params = 0x10000100, .map_io = ams_delta_map_io, + .reserve = omap_reserve, .init_irq = ams_delta_init_irq, .init_machine = ams_delta_init, .timer = &omap_timer, diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c index 096f2ed102cb..059bac60b35a 100644 --- a/arch/arm/mach-omap1/board-fsample.c +++ b/arch/arm/mach-omap1/board-fsample.c @@ -378,6 +378,7 @@ MACHINE_START(OMAP_FSAMPLE, "OMAP730 F-Sample") .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc, .boot_params = 0x10000100, .map_io = omap_fsample_map_io, + .reserve = omap_reserve, .init_irq = omap_fsample_init_irq, .init_machine = omap_fsample_init, .timer = &omap_timer, diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c index e1195a3467b8..7a65684d2a15 100644 --- a/arch/arm/mach-omap1/board-generic.c +++ b/arch/arm/mach-omap1/board-generic.c @@ -98,6 +98,7 @@ MACHINE_START(OMAP_GENERIC, "Generic OMAP1510/1610/1710") .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc, .boot_params = 0x10000100, .map_io = omap_generic_map_io, + .reserve = omap_reserve, .init_irq = omap_generic_init_irq, .init_machine = omap_generic_init, .timer = &omap_timer, diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index d1100e4f65ac..68b2beda8b99 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -467,6 +467,7 @@ MACHINE_START(OMAP_H2, "TI-H2") .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc, .boot_params = 0x10000100, .map_io = h2_map_io, + .reserve = omap_reserve, .init_irq = h2_init_irq, .init_machine = h2_init, .timer = &omap_timer, diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index a53ab8297d25..0b0825fe6751 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -437,6 +437,7 @@ MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board") .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc, .boot_params = 0x10000100, .map_io = h3_map_io, + .reserve = omap_reserve, .init_irq = h3_init_irq, .init_machine = h3_init, .timer = &omap_timer, diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c index 8e313b4b99a9..d70a4f0923f5 100644 --- a/arch/arm/mach-omap1/board-htcherald.c +++ b/arch/arm/mach-omap1/board-htcherald.c @@ -304,6 +304,7 @@ MACHINE_START(HERALD, "HTC Herald") .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc, .boot_params = 0x10000100, .map_io = htcherald_map_io, + .reserve = omap_reserve, .init_irq = htcherald_init_irq, .init_machine = htcherald_init, .timer = &omap_timer, diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c index 5d12fd35681b..91064b37859a 100644 --- a/arch/arm/mach-omap1/board-innovator.c +++ b/arch/arm/mach-omap1/board-innovator.c @@ -463,6 +463,7 @@ MACHINE_START(OMAP_INNOVATOR, "TI-Innovator") .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc, .boot_params = 0x10000100, .map_io = innovator_map_io, + .reserve = omap_reserve, .init_irq = innovator_init_irq, .init_machine = innovator_init, .timer = &omap_timer, diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index 71e1a3fad0ea..8c28b10f3dae 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -400,6 +400,7 @@ MACHINE_START(NOKIA770, "Nokia 770") .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc, .boot_params = 0x10000100, .map_io = omap_nokia770_map_io, + .reserve = omap_reserve, .init_irq = omap_nokia770_init_irq, .init_machine = omap_nokia770_init, .timer = &omap_timer, diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index 80d862001def..e2a72af30890 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -584,6 +584,7 @@ MACHINE_START(OMAP_OSK, "TI-OSK") .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc, .boot_params = 0x10000100, .map_io = osk_map_io, + .reserve = omap_reserve, .init_irq = osk_init_irq, .init_machine = osk_init, .timer = &omap_timer, diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c index 569b4c9085cd..61a2321b9732 100644 --- a/arch/arm/mach-omap1/board-palmte.c +++ b/arch/arm/mach-omap1/board-palmte.c @@ -373,6 +373,7 @@ MACHINE_START(OMAP_PALMTE, "OMAP310 based Palm Tungsten E") .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc, .boot_params = 0x10000100, .map_io = omap_palmte_map_io, + .reserve = omap_reserve, .init_irq = omap_palmte_init_irq, .init_machine = omap_palmte_init, .timer = &omap_timer, diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c index 6ad49a2cc1a0..21c01c6afcc1 100644 --- a/arch/arm/mach-omap1/board-palmtt.c +++ b/arch/arm/mach-omap1/board-palmtt.c @@ -321,6 +321,7 @@ MACHINE_START(OMAP_PALMTT, "OMAP1510 based Palm Tungsten|T") .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc, .boot_params = 0x10000100, .map_io = omap_palmtt_map_io, + .reserve = omap_reserve, .init_irq = omap_palmtt_init_irq, .init_machine = omap_palmtt_init, .timer = &omap_timer, diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c index 6641de9257ef..f32492451533 100644 --- a/arch/arm/mach-omap1/board-palmz71.c +++ b/arch/arm/mach-omap1/board-palmz71.c @@ -338,10 +338,12 @@ omap_palmz71_map_io(void) } MACHINE_START(OMAP_PALMZ71, "OMAP310 based Palm Zire71") - .phys_io = 0xfff00000, - .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc, - .boot_params = 0x10000100,.map_io = omap_palmz71_map_io, - .init_irq = omap_palmz71_init_irq, - .init_machine = omap_palmz71_init, - .timer = &omap_timer, + .phys_io = 0xfff00000, + .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc, + .boot_params = 0x10000100, + .map_io = omap_palmz71_map_io, + .reserve = omap_reserve, + .init_irq = omap_palmz71_init_irq, + .init_machine = omap_palmz71_init, + .timer = &omap_timer, MACHINE_END diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c index e854d5741c88..8b5ab1fcc405 100644 --- a/arch/arm/mach-omap1/board-perseus2.c +++ b/arch/arm/mach-omap1/board-perseus2.c @@ -339,6 +339,7 @@ MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2") .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc, .boot_params = 0x10000100, .map_io = omap_perseus2_map_io, + .reserve = omap_reserve, .init_irq = omap_perseus2_init_irq, .init_machine = omap_perseus2_init, .timer = &omap_timer, diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c index 2fb1e5f8e2ec..995566b862bb 100644 --- a/arch/arm/mach-omap1/board-sx1.c +++ b/arch/arm/mach-omap1/board-sx1.c @@ -423,7 +423,8 @@ MACHINE_START(SX1, "OMAP310 based Siemens SX1") .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc, .boot_params = 0x10000100, .map_io = omap_sx1_map_io, - .init_irq = omap_sx1_init_irq, + .reserve = omap_reserve, + .init_irq = omap_sx1_init_irq, .init_machine = omap_sx1_init, .timer = &omap_timer, MACHINE_END diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c index 87b9436fe7c0..4c483dc1de5c 100644 --- a/arch/arm/mach-omap1/board-voiceblue.c +++ b/arch/arm/mach-omap1/board-voiceblue.c @@ -287,6 +287,7 @@ MACHINE_START(VOICEBLUE, "VoiceBlue OMAP5910") .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc, .boot_params = 0x10000100, .map_io = voiceblue_map_io, + .reserve = omap_reserve, .init_irq = voiceblue_init_irq, .init_machine = voiceblue_init, .timer = &omap_timer, diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c index d9b8d82530ae..0ce3fec2d257 100644 --- a/arch/arm/mach-omap1/io.c +++ b/arch/arm/mach-omap1/io.c @@ -22,7 +22,6 @@ extern void omap_check_revision(void); extern void omap_sram_init(void); -extern void omapfb_reserve_sdram(void); /* * The machine specific code may provide the extra mapping besides the @@ -122,7 +121,6 @@ void __init omap1_map_common_io(void) #endif omap_sram_init(); - omapfb_reserve_sdram(); } /* diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c index a11a575745e4..42f49f785c93 100644 --- a/arch/arm/mach-omap2/board-2430sdp.c +++ b/arch/arm/mach-omap2/board-2430sdp.c @@ -248,6 +248,7 @@ MACHINE_START(OMAP_2430SDP, "OMAP2430 sdp2430 board") .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap_2430sdp_map_io, + .reserve = omap_reserve, .init_irq = omap_2430sdp_init_irq, .init_machine = omap_2430sdp_init, .timer = &omap_timer, diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index f474a80b8867..dd9c03171a19 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -815,6 +815,7 @@ MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board") .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap_3430sdp_map_io, + .reserve = omap_reserve, .init_irq = omap_3430sdp_init_irq, .init_machine = omap_3430sdp_init, .timer = &omap_timer, diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c index 504d2bd222fe..57290fb3fcd7 100644 --- a/arch/arm/mach-omap2/board-3630sdp.c +++ b/arch/arm/mach-omap2/board-3630sdp.c @@ -108,6 +108,7 @@ MACHINE_START(OMAP_3630SDP, "OMAP 3630SDP board") .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap_sdp_map_io, + .reserve = omap_reserve, .init_irq = omap_sdp_init_irq, .init_machine = omap_sdp_init, .timer = &omap_timer, diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index e4a5d66b83b8..4bb2c5d151ec 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -402,6 +402,7 @@ MACHINE_START(OMAP_4430SDP, "OMAP4430 4430SDP board") .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap_4430sdp_map_io, + .reserve = omap_reserve, .init_irq = omap_4430sdp_init_irq, .init_machine = omap_4430sdp_init, .timer = &omap_timer, diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c index af383a876943..7da92defcde0 100644 --- a/arch/arm/mach-omap2/board-am3517evm.c +++ b/arch/arm/mach-omap2/board-am3517evm.c @@ -472,6 +472,7 @@ MACHINE_START(OMAP3517EVM, "OMAP3517/AM3517 EVM") .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = am3517_evm_map_io, + .reserve = omap_reserve, .init_irq = am3517_evm_init_irq, .init_machine = am3517_evm_init, .timer = &omap_timer, diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c index aa69fb999748..bd75642aee65 100644 --- a/arch/arm/mach-omap2/board-apollon.c +++ b/arch/arm/mach-omap2/board-apollon.c @@ -346,6 +346,7 @@ MACHINE_START(OMAP_APOLLON, "OMAP24xx Apollon") .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap_apollon_map_io, + .reserve = omap_reserve, .init_irq = omap_apollon_init_irq, .init_machine = omap_apollon_init, .timer = &omap_timer, diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index e679a2cc86c3..bc4c3f807068 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -837,6 +837,7 @@ MACHINE_START(CM_T35, "Compulab CM-T35") .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = cm_t35_map_io, + .reserve = omap_reserve, .init_irq = cm_t35_init_irq, .init_machine = cm_t35_init, .timer = &omap_timer, diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index 77022b588816..922b7464807f 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -825,6 +825,7 @@ MACHINE_START(DEVKIT8000, "OMAP3 Devkit8000") .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = devkit8000_map_io, + .reserve = omap_reserve, .init_irq = devkit8000_init_irq, .init_machine = devkit8000_init, .timer = &omap_timer, diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 16cc06860670..9242902d3a43 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -59,6 +59,7 @@ MACHINE_START(OMAP_GENERIC, "Generic OMAP24xx") .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap_generic_map_io, + .reserve = omap_reserve, .init_irq = omap_generic_init_irq, .init_machine = omap_generic_init, .timer = &omap_timer, diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c index 0665f2c8dc8e..16703fdb3515 100644 --- a/arch/arm/mach-omap2/board-h4.c +++ b/arch/arm/mach-omap2/board-h4.c @@ -378,6 +378,7 @@ MACHINE_START(OMAP_H4, "OMAP2420 H4 board") .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap_h4_map_io, + .reserve = omap_reserve, .init_irq = omap_h4_init_irq, .init_machine = omap_h4_init, .timer = &omap_timer, diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index d55c57b761a9..759e39d1a702 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -543,6 +543,7 @@ MACHINE_START(IGEP0020, "IGEP v2 board") .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = igep2_map_io, + .reserve = omap_reserve, .init_irq = igep2_init_irq, .init_machine = igep2_init, .timer = &omap_timer, diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index fefd7e6e9779..9cd2669113e4 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -417,6 +417,7 @@ MACHINE_START(OMAP_LDP, "OMAP LDP board") .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap_ldp_map_io, + .reserve = omap_reserve, .init_irq = omap_ldp_init_irq, .init_machine = omap_ldp_init, .timer = &omap_timer, diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c index 3ccc34ebdcc7..2565ff08a221 100644 --- a/arch/arm/mach-omap2/board-n8x0.c +++ b/arch/arm/mach-omap2/board-n8x0.c @@ -667,6 +667,7 @@ MACHINE_START(NOKIA_N800, "Nokia N800") .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = n8x0_map_io, + .reserve = omap_reserve, .init_irq = n8x0_init_irq, .init_machine = n8x0_init_machine, .timer = &omap_timer, @@ -677,6 +678,7 @@ MACHINE_START(NOKIA_N810, "Nokia N810") .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = n8x0_map_io, + .reserve = omap_reserve, .init_irq = n8x0_init_irq, .init_machine = n8x0_init_machine, .timer = &omap_timer, @@ -687,6 +689,7 @@ MACHINE_START(NOKIA_N810_WIMAX, "Nokia N810 WiMAX") .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = n8x0_map_io, + .reserve = omap_reserve, .init_irq = n8x0_init_irq, .init_machine = n8x0_init_machine, .timer = &omap_timer, diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 69b154cdc75d..0ab0c26db4dd 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -519,6 +519,7 @@ MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board") .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap3_beagle_map_io, + .reserve = omap_reserve, .init_irq = omap3_beagle_init_irq, .init_machine = omap3_beagle_init, .timer = &omap_timer, diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index b95261013812..a3d2e285e116 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -727,6 +727,7 @@ MACHINE_START(OMAP3EVM, "OMAP3 EVM") .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap3_evm_map_io, + .reserve = omap_reserve, .init_irq = omap3_evm_init_irq, .init_machine = omap3_evm_init, .timer = &omap_timer, diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index db06dc910ba7..c0f4f12eba54 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -601,6 +601,7 @@ MACHINE_START(OMAP3_PANDORA, "Pandora Handheld Console") .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap3pandora_map_io, + .reserve = omap_reserve, .init_irq = omap3pandora_init_irq, .init_machine = omap3pandora_init, .timer = &omap_timer, diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c index 2f5f8233dd5b..f05b867c5851 100644 --- a/arch/arm/mach-omap2/board-omap3touchbook.c +++ b/arch/arm/mach-omap2/board-omap3touchbook.c @@ -571,6 +571,7 @@ MACHINE_START(TOUCHBOOK, "OMAP3 touchbook Board") .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap3_touchbook_map_io, + .reserve = omap_reserve, .init_irq = omap3_touchbook_init_irq, .init_machine = omap3_touchbook_init, .timer = &omap_timer, diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index 79ac41400c21..87acb2f198ec 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -495,6 +495,7 @@ MACHINE_START(OVERO, "Gumstix Overo") .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = overo_map_io, + .reserve = omap_reserve, .init_irq = overo_init_irq, .init_machine = overo_init, .timer = &omap_timer, diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c index 1b86b5bb87a2..3bd956f9e19f 100644 --- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c @@ -154,6 +154,7 @@ MACHINE_START(NOKIA_RX51, "Nokia RX-51 board") .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = rx51_map_io, + .reserve = omap_reserve, .init_irq = rx51_init_irq, .init_machine = rx51_init, .timer = &omap_timer, diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c index 803ef14cbf2d..ffe188cb18e9 100644 --- a/arch/arm/mach-omap2/board-zoom2.c +++ b/arch/arm/mach-omap2/board-zoom2.c @@ -95,6 +95,7 @@ MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board") .io_pg_offst = (ZOOM_UART_VIRT >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap_zoom2_map_io, + .reserve = omap_reserve, .init_irq = omap_zoom2_init_irq, .init_machine = omap_zoom2_init, .timer = &omap_timer, diff --git a/arch/arm/mach-omap2/board-zoom3.c b/arch/arm/mach-omap2/board-zoom3.c index 33147042485f..5b605eba3e7b 100644 --- a/arch/arm/mach-omap2/board-zoom3.c +++ b/arch/arm/mach-omap2/board-zoom3.c @@ -77,6 +77,7 @@ MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board") .io_pg_offst = (ZOOM_UART_VIRT >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap_zoom_map_io, + .reserve = omap_reserve, .init_irq = omap_zoom_init_irq, .init_machine = omap_zoom_init, .timer = &omap_timer, diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c index 41b155acfca7..d33744117ce2 100644 --- a/arch/arm/mach-omap2/clock3xxx_data.c +++ b/arch/arm/mach-omap2/clock3xxx_data.c @@ -3166,6 +3166,10 @@ static struct clk uart4_ick_am35xx = { .recalc = &followparent_recalc, }; +static struct clk dummy_apb_pclk = { + .name = "apb_pclk", + .ops = &clkops_null, +}; /* * clkdev @@ -3173,6 +3177,7 @@ static struct clk uart4_ick_am35xx = { /* XXX At some point we should rename this file to clock3xxx_data.c */ static struct omap_clk omap3xxx_clks[] = { + CLK(NULL, "apb_pclk", &dummy_apb_pclk, CK_3XXX), CLK(NULL, "omap_32k_fck", &omap_32k_fck, CK_3XXX), CLK(NULL, "virt_12m_ck", &virt_12m_ck, CK_3XXX), CLK(NULL, "virt_13m_ck", &virt_13m_ck, CK_3XXX), diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 3cfb425ea67e..4e1f53d0b880 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -33,7 +33,6 @@ #include <plat/sdrc.h> #include <plat/gpmc.h> #include <plat/serial.h> -#include <plat/vram.h> #include "clock2xxx.h" #include "clock3xxx.h" @@ -241,8 +240,6 @@ static void __init _omap2_map_common_io(void) omap2_check_revision(); omap_sram_init(); - omapfb_reserve_sdram(); - omap_vram_reserve_sdram(); } #ifdef CONFIG_ARCH_OMAP2420 diff --git a/arch/arm/mach-pxa/cm-x2xx-pci.c b/arch/arm/mach-pxa/cm-x2xx-pci.c index 161fc2d61207..0f3130599770 100644 --- a/arch/arm/mach-pxa/cm-x2xx-pci.c +++ b/arch/arm/mach-pxa/cm-x2xx-pci.c @@ -35,7 +35,7 @@ static int cmx2xx_it8152_irq_gpio; * This is really ugly and we need a better way of specifying * DMA-capable regions of memory. */ -void __init cmx2xx_pci_adjust_zones(int node, unsigned long *zone_size, +void __init cmx2xx_pci_adjust_zones(unsigned long *zone_size, unsigned long *zhole_size) { unsigned int sz = SZ_64M >> PAGE_SHIFT; @@ -46,7 +46,7 @@ void __init cmx2xx_pci_adjust_zones(int node, unsigned long *zone_size, /* * Only adjust if > 64M on current system */ - if (node || (zone_size[0] <= sz)) + if (zone_size[0] <= sz) return; zone_size[1] = zone_size[0] - sz; diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c index 51ffa6afb675..461ba4080155 100644 --- a/arch/arm/mach-pxa/corgi.c +++ b/arch/arm/mach-pxa/corgi.c @@ -715,7 +715,6 @@ static void __init fixup_corgi(struct machine_desc *desc, sharpsl_save_param(); mi->nr_banks=1; mi->bank[0].start = 0xa0000000; - mi->bank[0].node = 0; if (machine_is_corgi()) mi->bank[0].size = (32*1024*1024); else diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c index 96ed13081639..a0ab3082a000 100644 --- a/arch/arm/mach-pxa/eseries.c +++ b/arch/arm/mach-pxa/eseries.c @@ -34,7 +34,6 @@ void __init eseries_fixup(struct machine_desc *desc, { mi->nr_banks=1; mi->bank[0].start = 0xa0000000; - mi->bank[0].node = 0; if (machine_is_e800()) mi->bank[0].size = (128*1024*1024); else diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h index 890fb90a672f..c6305c5b8a72 100644 --- a/arch/arm/mach-pxa/generic.h +++ b/arch/arm/mach-pxa/generic.h @@ -26,8 +26,7 @@ extern unsigned int get_clk_frequency_khz(int info); #define SET_BANK(__nr,__start,__size) \ mi->bank[__nr].start = (__start), \ - mi->bank[__nr].size = (__size), \ - mi->bank[__nr].node = (((unsigned)(__start) - PHYS_OFFSET) >> 27) + mi->bank[__nr].size = (__size) #define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x) diff --git a/arch/arm/mach-pxa/include/mach/memory.h b/arch/arm/mach-pxa/include/mach/memory.h index f626730ee42e..92361a66b223 100644 --- a/arch/arm/mach-pxa/include/mach/memory.h +++ b/arch/arm/mach-pxa/include/mach/memory.h @@ -17,24 +17,11 @@ */ #define PHYS_OFFSET UL(0xa0000000) -/* - * The nodes are matched with the physical SDRAM banks as follows: - * - * node 0: 0xa0000000-0xa3ffffff --> 0xc0000000-0xc3ffffff - * node 1: 0xa4000000-0xa7ffffff --> 0xc4000000-0xc7ffffff - * node 2: 0xa8000000-0xabffffff --> 0xc8000000-0xcbffffff - * node 3: 0xac000000-0xafffffff --> 0xcc000000-0xcfffffff - * - * This needs a node mem size of 26 bits. - */ -#define NODE_MEM_SIZE_BITS 26 - #if !defined(__ASSEMBLY__) && defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI) -void cmx2xx_pci_adjust_zones(int node, unsigned long *size, - unsigned long *holes); +void cmx2xx_pci_adjust_zones(unsigned long *size, unsigned long *holes); -#define arch_adjust_zones(node, size, holes) \ - cmx2xx_pci_adjust_zones(node, size, holes) +#define arch_adjust_zones(size, holes) \ + cmx2xx_pci_adjust_zones(size, holes) #define ISA_DMA_THRESHOLD (PHYS_OFFSET + SZ_64M - 1) #define MAX_DMA_ADDRESS (PAGE_OFFSET + SZ_64M) diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c index 5305a3993e69..5e92d84fe50d 100644 --- a/arch/arm/mach-pxa/palmt5.c +++ b/arch/arm/mach-pxa/palmt5.c @@ -21,6 +21,7 @@ #include <linux/irq.h> #include <linux/gpio_keys.h> #include <linux/input.h> +#include <linux/memblock.h> #include <linux/pda_power.h> #include <linux/pwm_backlight.h> #include <linux/gpio.h> @@ -396,6 +397,11 @@ static void __init palmt5_udc_init(void) } } +static void __init palmt5_reserve(void) +{ + memblock_reserve(0xa0200000, 0x1000); +} + static void __init palmt5_init(void) { pxa2xx_mfp_config(ARRAY_AND_SIZE(palmt5_pin_config)); @@ -421,6 +427,7 @@ MACHINE_START(PALMT5, "Palm Tungsten|T5") .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .boot_params = 0xa0000100, .map_io = pxa_map_io, + .reserve = palmt5_reserve, .init_irq = pxa27x_init_irq, .timer = &pxa_timer, .init_machine = palmt5_init diff --git a/arch/arm/mach-pxa/palmtreo.c b/arch/arm/mach-pxa/palmtreo.c index d8b4469607a1..3d0c9cc2a406 100644 --- a/arch/arm/mach-pxa/palmtreo.c +++ b/arch/arm/mach-pxa/palmtreo.c @@ -20,6 +20,7 @@ #include <linux/irq.h> #include <linux/gpio_keys.h> #include <linux/input.h> +#include <linux/memblock.h> #include <linux/pda_power.h> #include <linux/pwm_backlight.h> #include <linux/gpio.h> @@ -633,6 +634,12 @@ static void __init treo_lcd_power_init(void) treo_lcd_screen.pxafb_lcd_power = treo_lcd_power; } +static void __init treo_reserve(void) +{ + memblock_reserve(0xa0000000, 0x1000); + memblock_reserve(0xa2000000, 0x1000); +} + static void __init treo_init(void) { pxa_set_ffuart_info(NULL); @@ -668,6 +675,7 @@ MACHINE_START(TREO680, "Palm Treo 680") .io_pg_offst = io_p2v(0x40000000), .boot_params = 0xa0000100, .map_io = pxa_map_io, + .reserve = treo_reserve, .init_irq = pxa27x_init_irq, .timer = &pxa_timer, .init_machine = treo680_init, @@ -691,6 +699,7 @@ MACHINE_START(CENTRO, "Palm Centro 685") .io_pg_offst = io_p2v(0x40000000), .boot_params = 0xa0000100, .map_io = pxa_map_io, + .reserve = treo_reserve, .init_irq = pxa27x_init_irq, .timer = &pxa_timer, .init_machine = centro_init, diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c index f4abdaafdac4..bc2758b54446 100644 --- a/arch/arm/mach-pxa/poodle.c +++ b/arch/arm/mach-pxa/poodle.c @@ -463,7 +463,6 @@ static void __init fixup_poodle(struct machine_desc *desc, sharpsl_save_param(); mi->nr_banks=1; mi->bank[0].start = 0xa0000000; - mi->bank[0].node = 0; mi->bank[0].size = (32*1024*1024); } diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index c1048a35f187..51756c723557 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -847,7 +847,6 @@ static void __init fixup_spitz(struct machine_desc *desc, sharpsl_save_param(); mi->nr_banks = 1; mi->bank[0].start = 0xa0000000; - mi->bank[0].node = 0; mi->bank[0].size = (64*1024*1024); } diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index 7512b822c6ca..83cc3a18c2e9 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -948,7 +948,6 @@ static void __init fixup_tosa(struct machine_desc *desc, sharpsl_save_param(); mi->nr_banks=1; mi->bank[0].start = 0xa0000000; - mi->bank[0].node = 0; mi->bank[0].size = (64*1024*1024); } diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c index 595be19f8ad5..a54fbda77e45 100644 --- a/arch/arm/mach-realview/core.c +++ b/arch/arm/mach-realview/core.c @@ -61,12 +61,11 @@ void __iomem *gic_cpu_base_addr; /* * Adjust the zones if there are restrictions for DMA access. */ -void __init realview_adjust_zones(int node, unsigned long *size, - unsigned long *hole) +void __init realview_adjust_zones(unsigned long *size, unsigned long *hole) { unsigned long dma_size = SZ_256M >> PAGE_SHIFT; - if (!machine_is_realview_pbx() || node || (size[0] <= dma_size)) + if (!machine_is_realview_pbx() || size[0] <= dma_size) return; size[ZONE_NORMAL] = size[0] - dma_size; @@ -232,6 +231,21 @@ static unsigned int realview_mmc_status(struct device *dev) struct amba_device *adev = container_of(dev, struct amba_device, dev); u32 mask; + if (machine_is_realview_pb1176()) { + static bool inserted = false; + + /* + * The PB1176 does not have the status register, + * assume it is inserted at startup, then invert + * for each call so card insertion/removal will + * be detected anyway. This will not be called if + * GPIO on PL061 is active, which is the proper + * way to do this on the PB1176. + */ + inserted = !inserted; + return inserted ? 0 : 1; + } + if (adev->res.start == REALVIEW_MMCI0_BASE) mask = 1; else @@ -300,8 +314,13 @@ static struct clk ref24_clk = { .rate = 24000000, }; +static struct clk dummy_apb_pclk; + static struct clk_lookup lookups[] = { - { /* UART0 */ + { /* Bus clock */ + .con_id = "apb_pclk", + .clk = &dummy_apb_pclk, + }, { /* UART0 */ .dev_id = "dev:uart0", .clk = &ref24_clk, }, { /* UART1 */ @@ -313,6 +332,12 @@ static struct clk_lookup lookups[] = { }, { /* UART3 */ .dev_id = "fpga:uart3", .clk = &ref24_clk, + }, { /* UART3 is on the dev chip in PB1176 */ + .dev_id = "dev:uart3", + .clk = &ref24_clk, + }, { /* UART4 only exists in PB1176 */ + .dev_id = "fpga:uart4", + .clk = &ref24_clk, }, { /* KMI0 */ .dev_id = "fpga:kmi0", .clk = &ref24_clk, @@ -322,12 +347,15 @@ static struct clk_lookup lookups[] = { }, { /* MMC0 */ .dev_id = "fpga:mmc0", .clk = &ref24_clk, - }, { /* EB:CLCD */ + }, { /* CLCD is in the PB1176 and EB DevChip */ .dev_id = "dev:clcd", .clk = &oscvco_clk, }, { /* PB:CLCD */ .dev_id = "issp:clcd", .clk = &oscvco_clk, + }, { /* SSP */ + .dev_id = "dev:ssp0", + .clk = &ref24_clk, } }; @@ -342,7 +370,7 @@ static int __init clk_init(void) return 0; } -arch_initcall(clk_init); +core_initcall(clk_init); /* * CLCD support. diff --git a/arch/arm/mach-realview/include/mach/board-pb1176.h b/arch/arm/mach-realview/include/mach/board-pb1176.h index 2f5ccb298858..002ab5d8c11c 100644 --- a/arch/arm/mach-realview/include/mach/board-pb1176.h +++ b/arch/arm/mach-realview/include/mach/board-pb1176.h @@ -26,6 +26,7 @@ /* * Peripheral addresses */ +#define REALVIEW_PB1176_UART4_BASE 0x10009000 /* UART 4 */ #define REALVIEW_PB1176_SCTL_BASE 0x10100000 /* System controller */ #define REALVIEW_PB1176_SMC_BASE 0x10111000 /* SMC */ #define REALVIEW_PB1176_DMC_BASE 0x10109000 /* DMC configuration */ diff --git a/arch/arm/mach-realview/include/mach/irqs-pb1176.h b/arch/arm/mach-realview/include/mach/irqs-pb1176.h index 830055bb8628..5c3c625e3e04 100644 --- a/arch/arm/mach-realview/include/mach/irqs-pb1176.h +++ b/arch/arm/mach-realview/include/mach/irqs-pb1176.h @@ -40,6 +40,7 @@ #define IRQ_DC1176_L2CC (IRQ_DC1176_GIC_START + 13) #define IRQ_DC1176_RTC (IRQ_DC1176_GIC_START + 14) #define IRQ_DC1176_CLCD (IRQ_DC1176_GIC_START + 15) /* CLCD controller */ +#define IRQ_DC1176_SSP (IRQ_DC1176_GIC_START + 17) /* SSP port */ #define IRQ_DC1176_UART0 (IRQ_DC1176_GIC_START + 18) /* UART 0 on development chip */ #define IRQ_DC1176_UART1 (IRQ_DC1176_GIC_START + 19) /* UART 1 on development chip */ #define IRQ_DC1176_UART2 (IRQ_DC1176_GIC_START + 20) /* UART 2 on development chip */ @@ -73,7 +74,6 @@ #define IRQ_PB1176_RTC (IRQ_PB1176_GIC_START + 25) /* Real Time Clock */ #define IRQ_PB1176_GPIO0 -1 -#define IRQ_PB1176_SSP -1 #define IRQ_PB1176_SCTL -1 #define NR_GIC_PB1176 2 diff --git a/arch/arm/mach-realview/include/mach/memory.h b/arch/arm/mach-realview/include/mach/memory.h index 2417bbcf97fd..5dafc157b276 100644 --- a/arch/arm/mach-realview/include/mach/memory.h +++ b/arch/arm/mach-realview/include/mach/memory.h @@ -30,10 +30,9 @@ #endif #if !defined(__ASSEMBLY__) && defined(CONFIG_ZONE_DMA) -extern void realview_adjust_zones(int node, unsigned long *size, - unsigned long *hole); -#define arch_adjust_zones(node, size, hole) \ - realview_adjust_zones(node, size, hole) +extern void realview_adjust_zones(unsigned long *size, unsigned long *hole); +#define arch_adjust_zones(size, hole) \ + realview_adjust_zones(size, hole) #define ISA_DMA_THRESHOLD (PHYS_OFFSET + SZ_256M - 1) #define MAX_DMA_ADDRESS (PAGE_OFFSET + SZ_256M) diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c index 4425018fab82..991c1f8390e2 100644 --- a/arch/arm/mach-realview/realview_eb.c +++ b/arch/arm/mach-realview/realview_eb.c @@ -25,6 +25,7 @@ #include <linux/amba/bus.h> #include <linux/amba/pl061.h> #include <linux/amba/mmci.h> +#include <linux/amba/pl022.h> #include <linux/io.h> #include <mach/hardware.h> @@ -129,6 +130,12 @@ static struct pl061_platform_data gpio2_plat_data = { .irq_base = -1, }; +static struct pl022_ssp_controller ssp0_plat_data = { + .bus_id = 0, + .enable_dma = 0, + .num_chipselect = 1, +}; + /* * RealView EB AMBA devices */ @@ -213,7 +220,7 @@ AMBA_DEVICE(sci0, "dev:sci0", SCI, NULL); AMBA_DEVICE(uart0, "dev:uart0", EB_UART0, NULL); AMBA_DEVICE(uart1, "dev:uart1", EB_UART1, NULL); AMBA_DEVICE(uart2, "dev:uart2", EB_UART2, NULL); -AMBA_DEVICE(ssp0, "dev:ssp0", EB_SSP, NULL); +AMBA_DEVICE(ssp0, "dev:ssp0", EB_SSP, &ssp0_plat_data); static struct amba_device *amba_devs[] __initdata = { &dmac_device, @@ -324,6 +331,26 @@ static struct platform_device pmu_device = { .resource = pmu_resources, }; +static struct resource char_lcd_resources[] = { + { + .start = REALVIEW_CHAR_LCD_BASE, + .end = (REALVIEW_CHAR_LCD_BASE + SZ_4K - 1), + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_EB_CHARLCD, + .end = IRQ_EB_CHARLCD, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device char_lcd_device = { + .name = "arm-charlcd", + .id = -1, + .num_resources = ARRAY_SIZE(char_lcd_resources), + .resource = char_lcd_resources, +}; + static void __init gic_init_irq(void) { if (core_tile_eb11mp() || core_tile_a9mp()) { @@ -442,6 +469,7 @@ static void __init realview_eb_init(void) realview_flash_register(&realview_eb_flash_resource, 1); platform_device_register(&realview_i2c_device); + platform_device_register(&char_lcd_device); eth_device_register(); realview_usb_register(realview_eb_isp1761_resources); diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c index 099a1f125cf8..d2be12eb829e 100644 --- a/arch/arm/mach-realview/realview_pb1176.c +++ b/arch/arm/mach-realview/realview_pb1176.c @@ -25,6 +25,7 @@ #include <linux/amba/bus.h> #include <linux/amba/pl061.h> #include <linux/amba/mmci.h> +#include <linux/amba/pl022.h> #include <linux/io.h> #include <mach/hardware.h> @@ -123,6 +124,12 @@ static struct pl061_platform_data gpio2_plat_data = { .irq_base = -1, }; +static struct pl022_ssp_controller ssp0_plat_data = { + .bus_id = 0, + .enable_dma = 0, + .num_chipselect = 1, +}; + /* * RealView PB1176 AMBA devices */ @@ -144,8 +151,6 @@ static struct pl061_platform_data gpio2_plat_data = { #define MPMC_DMA { 0, 0 } #define PB1176_CLCD_IRQ { IRQ_DC1176_CLCD, NO_IRQ } #define PB1176_CLCD_DMA { 0, 0 } -#define DMAC_IRQ { IRQ_PB1176_DMAC, NO_IRQ } -#define DMAC_DMA { 0, 0 } #define SCTL_IRQ { NO_IRQ, NO_IRQ } #define SCTL_DMA { 0, 0 } #define PB1176_WATCHDOG_IRQ { IRQ_DC1176_WATCHDOG, NO_IRQ } @@ -166,7 +171,9 @@ static struct pl061_platform_data gpio2_plat_data = { #define PB1176_UART2_DMA { 11, 10 } #define PB1176_UART3_IRQ { IRQ_DC1176_UART3, NO_IRQ } #define PB1176_UART3_DMA { 0x86, 0x87 } -#define PB1176_SSP_IRQ { IRQ_PB1176_SSP, NO_IRQ } +#define PB1176_UART4_IRQ { IRQ_PB1176_UART4, NO_IRQ } +#define PB1176_UART4_DMA { 0, 0 } +#define PB1176_SSP_IRQ { IRQ_DC1176_SSP, NO_IRQ } #define PB1176_SSP_DMA { 9, 8 } /* FPGA Primecells */ @@ -174,7 +181,7 @@ AMBA_DEVICE(aaci, "fpga:aaci", AACI, NULL); AMBA_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data); AMBA_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL); AMBA_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL); -AMBA_DEVICE(uart3, "fpga:uart3", PB1176_UART3, NULL); +AMBA_DEVICE(uart4, "fpga:uart4", PB1176_UART4, NULL); /* DevChip Primecells */ AMBA_DEVICE(smc, "dev:smc", PB1176_SMC, NULL); @@ -188,18 +195,16 @@ AMBA_DEVICE(sci0, "dev:sci0", SCI, NULL); AMBA_DEVICE(uart0, "dev:uart0", PB1176_UART0, NULL); AMBA_DEVICE(uart1, "dev:uart1", PB1176_UART1, NULL); AMBA_DEVICE(uart2, "dev:uart2", PB1176_UART2, NULL); -AMBA_DEVICE(ssp0, "dev:ssp0", PB1176_SSP, NULL); - -/* Primecells on the NEC ISSP chip */ -AMBA_DEVICE(clcd, "issp:clcd", PB1176_CLCD, &clcd_plat_data); -//AMBA_DEVICE(dmac, "issp:dmac", PB1176_DMAC, NULL); +AMBA_DEVICE(uart3, "dev:uart3", PB1176_UART3, NULL); +AMBA_DEVICE(ssp0, "dev:ssp0", PB1176_SSP, &ssp0_plat_data); +AMBA_DEVICE(clcd, "dev:clcd", PB1176_CLCD, &clcd_plat_data); static struct amba_device *amba_devs[] __initdata = { -// &dmac_device, &uart0_device, &uart1_device, &uart2_device, &uart3_device, + &uart4_device, &smc_device, &clcd_device, &sctl_device, @@ -276,6 +281,26 @@ static struct platform_device pmu_device = { .resource = &pmu_resource, }; +static struct resource char_lcd_resources[] = { + { + .start = REALVIEW_CHAR_LCD_BASE, + .end = (REALVIEW_CHAR_LCD_BASE + SZ_4K - 1), + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_PB1176_CHARLCD, + .end = IRQ_PB1176_CHARLCD, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device char_lcd_device = { + .name = "arm-charlcd", + .id = -1, + .num_resources = ARRAY_SIZE(char_lcd_resources), + .resource = char_lcd_resources, +}; + static void __init gic_init_irq(void) { /* ARM1176 DevChip GIC, primary */ @@ -338,6 +363,7 @@ static void __init realview_pb1176_init(void) platform_device_register(&realview_i2c_device); realview_usb_register(realview_pb1176_isp1761_resources); platform_device_register(&pmu_device); + platform_device_register(&char_lcd_device); for (i = 0; i < ARRAY_SIZE(amba_devs); i++) { struct amba_device *d = amba_devs[i]; diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c index 0e07a5ccb75f..d591bc00b86e 100644 --- a/arch/arm/mach-realview/realview_pb11mp.c +++ b/arch/arm/mach-realview/realview_pb11mp.c @@ -25,6 +25,7 @@ #include <linux/amba/bus.h> #include <linux/amba/pl061.h> #include <linux/amba/mmci.h> +#include <linux/amba/pl022.h> #include <linux/io.h> #include <mach/hardware.h> @@ -124,6 +125,12 @@ static struct pl061_platform_data gpio2_plat_data = { .irq_base = -1, }; +static struct pl022_ssp_controller ssp0_plat_data = { + .bus_id = 0, + .enable_dma = 0, + .num_chipselect = 1, +}; + /* * RealView PB11MPCore AMBA devices */ @@ -190,7 +197,7 @@ AMBA_DEVICE(sci0, "dev:sci0", SCI, NULL); AMBA_DEVICE(uart0, "dev:uart0", PB11MP_UART0, NULL); AMBA_DEVICE(uart1, "dev:uart1", PB11MP_UART1, NULL); AMBA_DEVICE(uart2, "dev:uart2", PB11MP_UART2, NULL); -AMBA_DEVICE(ssp0, "dev:ssp0", PB11MP_SSP, NULL); +AMBA_DEVICE(ssp0, "dev:ssp0", PB11MP_SSP, &ssp0_plat_data); /* Primecells on the NEC ISSP chip */ AMBA_DEVICE(clcd, "issp:clcd", PB11MP_CLCD, &clcd_plat_data); diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c index ac2f06f1ca50..6c37621217bc 100644 --- a/arch/arm/mach-realview/realview_pba8.c +++ b/arch/arm/mach-realview/realview_pba8.c @@ -25,6 +25,7 @@ #include <linux/amba/bus.h> #include <linux/amba/pl061.h> #include <linux/amba/mmci.h> +#include <linux/amba/pl022.h> #include <linux/io.h> #include <asm/irq.h> @@ -114,6 +115,12 @@ static struct pl061_platform_data gpio2_plat_data = { .irq_base = -1, }; +static struct pl022_ssp_controller ssp0_plat_data = { + .bus_id = 0, + .enable_dma = 0, + .num_chipselect = 1, +}; + /* * RealView PBA8Core AMBA devices */ @@ -180,7 +187,7 @@ AMBA_DEVICE(sci0, "dev:sci0", SCI, NULL); AMBA_DEVICE(uart0, "dev:uart0", PBA8_UART0, NULL); AMBA_DEVICE(uart1, "dev:uart1", PBA8_UART1, NULL); AMBA_DEVICE(uart2, "dev:uart2", PBA8_UART2, NULL); -AMBA_DEVICE(ssp0, "dev:ssp0", PBA8_SSP, NULL); +AMBA_DEVICE(ssp0, "dev:ssp0", PBA8_SSP, &ssp0_plat_data); /* Primecells on the NEC ISSP chip */ AMBA_DEVICE(clcd, "issp:clcd", PBA8_CLCD, &clcd_plat_data); diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c index 08fd683adc4c..9428eff0b116 100644 --- a/arch/arm/mach-realview/realview_pbx.c +++ b/arch/arm/mach-realview/realview_pbx.c @@ -24,6 +24,7 @@ #include <linux/amba/bus.h> #include <linux/amba/pl061.h> #include <linux/amba/mmci.h> +#include <linux/amba/pl022.h> #include <linux/io.h> #include <asm/irq.h> @@ -136,6 +137,12 @@ static struct pl061_platform_data gpio2_plat_data = { .irq_base = -1, }; +static struct pl022_ssp_controller ssp0_plat_data = { + .bus_id = 0, + .enable_dma = 0, + .num_chipselect = 1, +}; + /* * RealView PBXCore AMBA devices */ @@ -202,7 +209,7 @@ AMBA_DEVICE(sci0, "dev:sci0", SCI, NULL); AMBA_DEVICE(uart0, "dev:uart0", PBX_UART0, NULL); AMBA_DEVICE(uart1, "dev:uart1", PBX_UART1, NULL); AMBA_DEVICE(uart2, "dev:uart2", PBX_UART2, NULL); -AMBA_DEVICE(ssp0, "dev:ssp0", PBX_SSP, NULL); +AMBA_DEVICE(ssp0, "dev:ssp0", PBX_SSP, &ssp0_plat_data); /* Primecells on the NEC ISSP chip */ AMBA_DEVICE(clcd, "issp:clcd", PBX_CLCD, &clcd_plat_data); diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c index 779b45b3f80f..3ba3bab139d0 100644 --- a/arch/arm/mach-s3c2410/mach-h1940.c +++ b/arch/arm/mach-s3c2410/mach-h1940.c @@ -15,6 +15,7 @@ #include <linux/types.h> #include <linux/interrupt.h> #include <linux/list.h> +#include <linux/memblock.h> #include <linux/timer.h> #include <linux/init.h> #include <linux/sysdev.h> @@ -304,6 +305,13 @@ static void __init h1940_map_io(void) s3c_pm_init(); } +/* H1940 and RX3715 need to reserve this for suspend */ +static void __init h1940_reserve(void) +{ + memblock_reserve(0x30003000, 0x1000); + memblock_reserve(0x30081000, 0x1000); +} + static void __init h1940_init_irq(void) { s3c24xx_init_irq(); @@ -346,6 +354,7 @@ MACHINE_START(H1940, "IPAQ-H1940") .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, .boot_params = S3C2410_SDRAM_PA + 0x100, .map_io = h1940_map_io, + .reserve = h1940_reserve, .init_irq = h1940_init_irq, .init_machine = h1940_init, .timer = &s3c24xx_timer, diff --git a/arch/arm/mach-s3c2412/mach-smdk2413.c b/arch/arm/mach-s3c2412/mach-smdk2413.c index ba93a356a839..054c9f92232a 100644 --- a/arch/arm/mach-s3c2412/mach-smdk2413.c +++ b/arch/arm/mach-s3c2412/mach-smdk2413.c @@ -119,7 +119,6 @@ static void __init smdk2413_fixup(struct machine_desc *desc, mi->nr_banks=1; mi->bank[0].start = 0x30000000; mi->bank[0].size = SZ_64M; - mi->bank[0].node = 0; } } diff --git a/arch/arm/mach-s3c2412/mach-vstms.c b/arch/arm/mach-s3c2412/mach-vstms.c index 3ca9265b6997..f291ac25d312 100644 --- a/arch/arm/mach-s3c2412/mach-vstms.c +++ b/arch/arm/mach-s3c2412/mach-vstms.c @@ -137,7 +137,6 @@ static void __init vstms_fixup(struct machine_desc *desc, mi->nr_banks=1; mi->bank[0].start = 0x30000000; mi->bank[0].size = SZ_64M; - mi->bank[0].node = 0; } } diff --git a/arch/arm/mach-s3c2440/mach-rx1950.c b/arch/arm/mach-s3c2440/mach-rx1950.c index 8603b577a24b..142d1f921176 100644 --- a/arch/arm/mach-s3c2440/mach-rx1950.c +++ b/arch/arm/mach-s3c2440/mach-rx1950.c @@ -15,6 +15,7 @@ #include <linux/types.h> #include <linux/interrupt.h> #include <linux/list.h> +#include <linux/memblock.h> #include <linux/delay.h> #include <linux/timer.h> #include <linux/init.h> @@ -570,12 +571,20 @@ static void __init rx1950_init_machine(void) platform_add_devices(rx1950_devices, ARRAY_SIZE(rx1950_devices)); } +/* H1940 and RX3715 need to reserve this for suspend */ +static void __init rx1950_reserve(void) +{ + memblock_reserve(0x30003000, 0x1000); + memblock_reserve(0x30081000, 0x1000); +} + MACHINE_START(RX1950, "HP iPAQ RX1950") /* Maintainers: Vasily Khoruzhick */ .phys_io = S3C2410_PA_UART, .io_pg_offst = (((u32) S3C24XX_VA_UART) >> 18) & 0xfffc, .boot_params = S3C2410_SDRAM_PA + 0x100, .map_io = rx1950_map_io, + .reserve = rx1950_reserve, .init_irq = s3c24xx_init_irq, .init_machine = rx1950_init_machine, .timer = &s3c24xx_timer, diff --git a/arch/arm/mach-s3c2440/mach-rx3715.c b/arch/arm/mach-s3c2440/mach-rx3715.c index d2946de3f365..6bb44f75a9ce 100644 --- a/arch/arm/mach-s3c2440/mach-rx3715.c +++ b/arch/arm/mach-s3c2440/mach-rx3715.c @@ -15,6 +15,7 @@ #include <linux/types.h> #include <linux/interrupt.h> #include <linux/list.h> +#include <linux/memblock.h> #include <linux/timer.h> #include <linux/init.h> #include <linux/tty.h> @@ -191,6 +192,13 @@ static void __init rx3715_map_io(void) s3c24xx_init_uarts(rx3715_uartcfgs, ARRAY_SIZE(rx3715_uartcfgs)); } +/* H1940 and RX3715 need to reserve this for suspend */ +static void __init rx3715_reserve(void) +{ + memblock_reserve(0x30003000, 0x1000); + memblock_reserve(0x30081000, 0x1000); +} + static void __init rx3715_init_irq(void) { s3c24xx_init_irq(); @@ -214,6 +222,7 @@ MACHINE_START(RX3715, "IPAQ-RX3715") .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, .boot_params = S3C2410_SDRAM_PA + 0x100, .map_io = rx3715_map_io, + .reserve = rx3715_reserve, .init_irq = rx3715_init_irq, .init_machine = rx3715_init_machine, .timer = &s3c24xx_timer, diff --git a/arch/arm/mach-sa1100/generic.h b/arch/arm/mach-sa1100/generic.h index ec03f187c52b..b7a9a601c2d1 100644 --- a/arch/arm/mach-sa1100/generic.h +++ b/arch/arm/mach-sa1100/generic.h @@ -13,8 +13,7 @@ extern void __init sa1100_init_gpio(void); #define SET_BANK(__nr,__start,__size) \ mi->bank[__nr].start = (__start), \ - mi->bank[__nr].size = (__size), \ - mi->bank[__nr].node = (((unsigned)(__start) - PHYS_OFFSET) >> 27) + mi->bank[__nr].size = (__size) extern void (*sa1100fb_backlight_power)(int on); extern void (*sa1100fb_lcd_power)(int on); diff --git a/arch/arm/mach-sa1100/include/mach/memory.h b/arch/arm/mach-sa1100/include/mach/memory.h index d5277f9bee77..128a1dfa96b9 100644 --- a/arch/arm/mach-sa1100/include/mach/memory.h +++ b/arch/arm/mach-sa1100/include/mach/memory.h @@ -17,10 +17,10 @@ #ifndef __ASSEMBLY__ #ifdef CONFIG_SA1111 -void sa1111_adjust_zones(int node, unsigned long *size, unsigned long *holes); +void sa1111_adjust_zones(unsigned long *size, unsigned long *holes); -#define arch_adjust_zones(node, size, holes) \ - sa1111_adjust_zones(node, size, holes) +#define arch_adjust_zones(size, holes) \ + sa1111_adjust_zones(size, holes) #define ISA_DMA_THRESHOLD (PHYS_OFFSET + SZ_1M - 1) #define MAX_DMA_ADDRESS (PAGE_OFFSET + SZ_1M) diff --git a/arch/arm/mach-shark/include/mach/memory.h b/arch/arm/mach-shark/include/mach/memory.h index 3053e5b7f168..d9c4812f1c31 100644 --- a/arch/arm/mach-shark/include/mach/memory.h +++ b/arch/arm/mach-shark/include/mach/memory.h @@ -19,9 +19,8 @@ #ifndef __ASSEMBLY__ -static inline void __arch_adjust_zones(int node, unsigned long *zone_size, unsigned long *zhole_size) +static inline void __arch_adjust_zones(unsigned long *zone_size, unsigned long *zhole_size) { - if (node != 0) return; /* Only the first 4 MB (=1024 Pages) are usable for DMA */ /* See dev / -> .properties in OpenFirmware. */ zone_size[1] = zone_size[0] - 1024; @@ -30,8 +29,8 @@ static inline void __arch_adjust_zones(int node, unsigned long *zone_size, unsig zhole_size[0] = 0; } -#define arch_adjust_zones(node, size, holes) \ - __arch_adjust_zones(node, size, holes) +#define arch_adjust_zones(size, holes) \ + __arch_adjust_zones(size, holes) #define ISA_DMA_THRESHOLD (PHYS_OFFSET + SZ_4M - 1) #define MAX_DMA_ADDRESS (PAGE_OFFSET + SZ_4M) diff --git a/arch/arm/mach-spear3xx/clock.c b/arch/arm/mach-spear3xx/clock.c index 39f6ccf22294..18febf92f20a 100644 --- a/arch/arm/mach-spear3xx/clock.c +++ b/arch/arm/mach-spear3xx/clock.c @@ -341,8 +341,11 @@ static struct clk gpio_clk = { .recalc = &follow_parent, }; +static struct clk dummy_apb_pclk; + /* array of all spear 3xx clock lookups */ static struct clk_lookup spear_clk_lookups[] = { + { .con_id = "apb_pclk", .clk = &dummy_apb_pclk}, /* root clks */ { .con_id = "osc_32k_clk", .clk = &osc_32k_clk}, { .con_id = "osc_24m_clk", .clk = &osc_24m_clk}, diff --git a/arch/arm/mach-spear6xx/clock.c b/arch/arm/mach-spear6xx/clock.c index 13e27c769685..36ff056b7321 100644 --- a/arch/arm/mach-spear6xx/clock.c +++ b/arch/arm/mach-spear6xx/clock.c @@ -428,8 +428,11 @@ static struct clk gpio2_clk = { .recalc = &follow_parent, }; +static struct clk dummy_apb_pclk; + /* array of all spear 6xx clock lookups */ static struct clk_lookup spear_clk_lookups[] = { + { .con_id = "apb_pclk", .clk = &dummy_apb_pclk}, /* root clks */ { .con_id = "osc_32k_clk", .clk = &osc_32k_clk}, { .con_id = "osc_30m_clk", .clk = &osc_30m_clk}, diff --git a/arch/arm/mach-u300/clock.c b/arch/arm/mach-u300/clock.c index 5af71d5ba665..5d12d547789e 100644 --- a/arch/arm/mach-u300/clock.c +++ b/arch/arm/mach-u300/clock.c @@ -1212,6 +1212,8 @@ static struct clk ppm_clk = { }; #endif +static struct clk dummy_apb_pclk; + #define DEF_LOOKUP(devid, clkref) \ { \ .dev_id = devid, \ @@ -1223,6 +1225,10 @@ static struct clk ppm_clk = { * look up through clockdevice. */ static struct clk_lookup lookups[] = { + { + .con_id = "apb_pclk", + .clk = &dummy_apb_pclk, + }, /* Connected directly to the AMBA bus */ DEF_LOOKUP("amba", &amba_clk), DEF_LOOKUP("cpu", &cpu_clk), diff --git a/arch/arm/mach-u300/u300.c b/arch/arm/mach-u300/u300.c index d2a0b8847a18..bfcda9820888 100644 --- a/arch/arm/mach-u300/u300.c +++ b/arch/arm/mach-u300/u300.c @@ -14,6 +14,7 @@ #include <linux/sched.h> #include <linux/interrupt.h> #include <linux/ioport.h> +#include <linux/memblock.h> #include <linux/platform_device.h> #include <linux/io.h> #include <mach/hardware.h> @@ -22,6 +23,21 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> +static void __init u300_reserve(void) +{ + /* + * U300 - This platform family can share physical memory + * between two ARM cpus, one running Linux and the other + * running another OS. + */ +#ifdef CONFIG_MACH_U300_SINGLE_RAM +#if ((CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1) == 1) && \ + CONFIG_MACH_U300_2MB_ALIGNMENT_FIX + memblock_reserve(PHYS_OFFSET, 0x00100000); +#endif +#endif +} + static void __init u300_init_machine(void) { u300_init_devices(); @@ -49,6 +65,7 @@ MACHINE_START(U300, MACH_U300_STRING) .io_pg_offst = ((U300_AHB_PER_VIRT_BASE) >> 18) & 0xfffc, .boot_params = BOOT_PARAMS_OFFSET, .map_io = u300_map_io, + .reserve = u300_reserve, .init_irq = u300_init_irq, .timer = &u300_timer, .init_machine = u300_init_machine, diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index bb8d7b771817..0e8fd135a57d 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -13,19 +13,42 @@ #include <linux/interrupt.h> #include <linux/platform_device.h> #include <linux/io.h> +#include <linux/gpio.h> #include <linux/amba/bus.h> #include <linux/amba/pl022.h> #include <linux/spi/spi.h> +#include <linux/mfd/ab8500.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> +#include <plat/pincfg.h> #include <plat/i2c.h> #include <mach/hardware.h> #include <mach/setup.h> #include <mach/devices.h> +#include "pins-db8500.h" + +static pin_cfg_t mop500_pins[] = { + /* SSP0 */ + GPIO143_SSP0_CLK, + GPIO144_SSP0_FRM, + GPIO145_SSP0_RXD, + GPIO146_SSP0_TXD, + + /* I2C */ + GPIO147_I2C0_SCL, + GPIO148_I2C0_SDA, + GPIO16_I2C1_SCL, + GPIO17_I2C1_SDA, + GPIO10_I2C2_SDA, + GPIO11_I2C2_SCL, + GPIO229_I2C3_SDA, + GPIO230_I2C3_SCL, +}; + static void ab4500_spi_cs_control(u32 command) { /* set the FRM signal, which is CS - TODO */ @@ -48,15 +71,20 @@ struct pl022_config_chip ab4500_chip_info = { .cs_control = ab4500_spi_cs_control, }; +static struct ab8500_platform_data ab8500_platdata = { + .irq_base = MOP500_AB8500_IRQ_BASE, +}; + static struct spi_board_info u8500_spi_devices[] = { { .modalias = "ab8500", .controller_data = &ab4500_chip_info, + .platform_data = &ab8500_platdata, .max_speed_hz = 12000000, .bus_num = 0, .chip_select = 0, .mode = SPI_MODE_0, - .irq = IRQ_AB4500, + .irq = IRQ_DB8500_AB8500, }, }; @@ -118,6 +146,10 @@ static void __init u8500_init_machine(void) { int i; + u8500_init_devices(); + + nmk_config_pins(mop500_pins, ARRAY_SIZE(mop500_pins)); + u8500_i2c0_device.dev.platform_data = &u8500_i2c0_data; ux500_i2c1_device.dev.platform_data = &u8500_i2c1_data; ux500_i2c2_device.dev.platform_data = &u8500_i2c2_data; @@ -133,8 +165,6 @@ static void __init u8500_init_machine(void) spi_register_board_info(u8500_spi_devices, ARRAY_SIZE(u8500_spi_devices)); - - u8500_init_devices(); } MACHINE_START(U8500, "ST-Ericsson MOP500 platform") diff --git a/arch/arm/mach-ux500/clock.c b/arch/arm/mach-ux500/clock.c index 0a1318fc8e2b..d8ab7f184fe4 100644 --- a/arch/arm/mach-ux500/clock.c +++ b/arch/arm/mach-ux500/clock.c @@ -453,7 +453,11 @@ static DEFINE_PRCC_CLK_CUSTOM(7, mtu0_ed, 2, -1, NULL, clk_mtu_get_rate, 0); static DEFINE_PRCC_CLK(7, wdg_ed, 1, -1, NULL); static DEFINE_PRCC_CLK(7, cfgreg_ed, 0, -1, NULL); +static struct clk clk_dummy_apb_pclk; + static struct clk_lookup u8500_common_clks[] = { + CLK(dummy_apb_pclk, NULL, "apb_pclk"), + /* Peripheral Cluster #1 */ CLK(gpio0, "gpio.0", NULL), CLK(gpio0, "gpio.1", NULL), diff --git a/arch/arm/mach-ux500/devices-db8500.c b/arch/arm/mach-ux500/devices-db8500.c index 822903421943..654fca944e65 100644 --- a/arch/arm/mach-ux500/devices-db8500.c +++ b/arch/arm/mach-ux500/devices-db8500.c @@ -65,7 +65,7 @@ struct amba_device u8500_ssp0_device = { .end = U8500_SSP0_BASE + SZ_4K - 1, .flags = IORESOURCE_MEM, }, - .irq = {IRQ_SSP0, NO_IRQ }, + .irq = {IRQ_DB8500_SSP0, NO_IRQ }, /* ST-Ericsson modified id */ .periphid = SSP_PER_ID, }; @@ -77,8 +77,8 @@ static struct resource u8500_i2c0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = IRQ_I2C0, - .end = IRQ_I2C0, + .start = IRQ_DB8500_I2C0, + .end = IRQ_DB8500_I2C0, .flags = IORESOURCE_IRQ, } }; @@ -97,8 +97,8 @@ static struct resource u8500_i2c4_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = IRQ_I2C4, - .end = IRQ_I2C4, + .start = IRQ_DB8500_I2C4, + .end = IRQ_DB8500_I2C4, .flags = IORESOURCE_IRQ, } }; @@ -130,8 +130,8 @@ static struct resource dma40_resources[] = { .name = "lcla", }, [3] = { - .start = IRQ_DMA, - .end = IRQ_DMA, + .start = IRQ_DB8500_DMA, + .end = IRQ_DB8500_DMA, .flags = IORESOURCE_IRQ} }; diff --git a/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h b/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h new file mode 100644 index 000000000000..cca4f705601e --- /dev/null +++ b/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h @@ -0,0 +1,23 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * Author: Rabin Vincent <rabin.vincent@stericsson.com> + * License terms: GNU General Public License (GPL) version 2 + */ + +#ifndef __MACH_IRQS_BOARD_MOP500_H +#define __MACH_IRQS_BOARD_MOP500_H + +#define AB8500_NR_IRQS 104 + +#define MOP500_AB8500_IRQ_BASE IRQ_BOARD_START +#define MOP500_AB8500_IRQ_END (MOP500_AB8500_IRQ_BASE \ + + AB8500_NR_IRQS) +#define MOP500_IRQ_END MOP500_AB8500_IRQ_END + +#if MOP500_IRQ_END > IRQ_BOARD_END +#undef IRQ_BOARD_END +#define IRQ_BOARD_END MOP500_IRQ_END +#endif + +#endif diff --git a/arch/arm/mach-ux500/include/mach/irqs-db5500.h b/arch/arm/mach-ux500/include/mach/irqs-db5500.h new file mode 100644 index 000000000000..6fbfe5e2065a --- /dev/null +++ b/arch/arm/mach-ux500/include/mach/irqs-db5500.h @@ -0,0 +1,85 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * Author: Rabin Vincent <rabin.vincent@stericsson.com> + * License terms: GNU General Public License (GPL) version 2 + */ + +#ifndef __MACH_IRQS_DB5500_H +#define __MACH_IRQS_DB5500_H + +#define IRQ_DB5500_MTU0 (IRQ_SHPI_START + 4) +#define IRQ_DB5500_SPI2 (IRQ_SHPI_START + 6) +#define IRQ_DB5500_PMU0 (IRQ_SHPI_START + 7) +#define IRQ_DB5500_SPI0 (IRQ_SHPI_START + 8) +#define IRQ_DB5500_RTT (IRQ_SHPI_START + 9) +#define IRQ_DB5500_PKA (IRQ_SHPI_START + 10) +#define IRQ_DB5500_UART0 (IRQ_SHPI_START + 11) +#define IRQ_DB5500_I2C3 (IRQ_SHPI_START + 12) +#define IRQ_DB5500_L2CC (IRQ_SHPI_START + 13) +#define IRQ_DB5500_MSP0 (IRQ_SHPI_START + 14) +#define IRQ_DB5500_CRYP1 (IRQ_SHPI_START + 15) +#define IRQ_DB5500_PMU1 (IRQ_SHPI_START + 16) +#define IRQ_DB5500_MTU1 (IRQ_SHPI_START + 17) +#define IRQ_DB5500_RTC (IRQ_SHPI_START + 18) +#define IRQ_DB5500_UART1 (IRQ_SHPI_START + 19) +#define IRQ_DB5500_USB_WAKEUP (IRQ_SHPI_START + 20) +#define IRQ_DB5500_I2C0 (IRQ_SHPI_START + 21) +#define IRQ_DB5500_I2C1 (IRQ_SHPI_START + 22) +#define IRQ_DB5500_USBOTG (IRQ_SHPI_START + 23) +#define IRQ_DB5500_DMA_SECURE (IRQ_SHPI_START + 24) +#define IRQ_DB5500_DMA (IRQ_SHPI_START + 25) +#define IRQ_DB5500_UART2 (IRQ_SHPI_START + 26) +#define IRQ_DB5500_ICN_PMU1 (IRQ_SHPI_START + 27) +#define IRQ_DB5500_ICN_PMU2 (IRQ_SHPI_START + 28) +#define IRQ_DB5500_UART3 (IRQ_SHPI_START + 29) +#define IRQ_DB5500_SPI3 (IRQ_SHPI_START + 30) +#define IRQ_DB5500_SDMMC4 (IRQ_SHPI_START + 31) +#define IRQ_DB5500_IRRC (IRQ_SHPI_START + 33) +#define IRQ_DB5500_IRDA_FT (IRQ_SHPI_START + 34) +#define IRQ_DB5500_IRDA_SD (IRQ_SHPI_START + 35) +#define IRQ_DB5500_IRDA_FI (IRQ_SHPI_START + 36) +#define IRQ_DB5500_IRDA_FD (IRQ_SHPI_START + 37) +#define IRQ_DB5500_FSMC_CODEREADY (IRQ_SHPI_START + 38) +#define IRQ_DB5500_FSMC_NANDWAIT (IRQ_SHPI_START + 39) +#define IRQ_DB5500_AB5500 (IRQ_SHPI_START + 40) +#define IRQ_DB5500_SDMMC2 (IRQ_SHPI_START + 41) +#define IRQ_DB5500_SIA (IRQ_SHPI_START + 42) +#define IRQ_DB5500_SIA2 (IRQ_SHPI_START + 43) +#define IRQ_DB5500_HVA (IRQ_SHPI_START + 44) +#define IRQ_DB5500_HVA2 (IRQ_SHPI_START + 45) +#define IRQ_DB5500_PRCMU0 (IRQ_SHPI_START + 46) +#define IRQ_DB5500_PRCMU1 (IRQ_SHPI_START + 47) +#define IRQ_DB5500_DISP (IRQ_SHPI_START + 48) +#define IRQ_DB5500_SDMMC1 (IRQ_SHPI_START + 50) +#define IRQ_DB5500_MSP1 (IRQ_SHPI_START + 52) +#define IRQ_DB5500_KBD (IRQ_SHPI_START + 53) +#define IRQ_DB5500_I2C2 (IRQ_SHPI_START + 55) +#define IRQ_DB5500_B2R2 (IRQ_SHPI_START + 56) +#define IRQ_DB5500_CRYP0 (IRQ_SHPI_START + 57) +#define IRQ_DB5500_SDMMC3 (IRQ_SHPI_START + 59) +#define IRQ_DB5500_SDMMC0 (IRQ_SHPI_START + 60) +#define IRQ_DB5500_HSEM (IRQ_SHPI_START + 61) +#define IRQ_DB5500_SBAG (IRQ_SHPI_START + 63) +#define IRQ_DB5500_SPI1 (IRQ_SHPI_START + 96) +#define IRQ_DB5500_MSP2 (IRQ_SHPI_START + 98) +#define IRQ_DB5500_SRPTIMER (IRQ_SHPI_START + 101) +#define IRQ_DB5500_CTI0 (IRQ_SHPI_START + 108) +#define IRQ_DB5500_CTI1 (IRQ_SHPI_START + 109) +#define IRQ_DB5500_ICN_ERR (IRQ_SHPI_START + 110) +#define IRQ_DB5500_MALI_PPMMU (IRQ_SHPI_START + 112) +#define IRQ_DB5500_MALI_PP (IRQ_SHPI_START + 113) +#define IRQ_DB5500_MALI_GPMMU (IRQ_SHPI_START + 114) +#define IRQ_DB5500_MALI_GP (IRQ_SHPI_START + 115) +#define IRQ_DB5500_MALI (IRQ_SHPI_START + 116) +#define IRQ_DB5500_PRCMU_SEM (IRQ_SHPI_START + 118) +#define IRQ_DB5500_GPIO0 (IRQ_SHPI_START + 119) +#define IRQ_DB5500_GPIO1 (IRQ_SHPI_START + 120) +#define IRQ_DB5500_GPIO2 (IRQ_SHPI_START + 121) +#define IRQ_DB5500_GPIO3 (IRQ_SHPI_START + 122) +#define IRQ_DB5500_GPIO4 (IRQ_SHPI_START + 123) +#define IRQ_DB5500_GPIO5 (IRQ_SHPI_START + 124) +#define IRQ_DB5500_GPIO6 (IRQ_SHPI_START + 125) +#define IRQ_DB5500_GPIO7 (IRQ_SHPI_START + 126) + +#endif diff --git a/arch/arm/mach-ux500/include/mach/irqs-db8500.h b/arch/arm/mach-ux500/include/mach/irqs-db8500.h new file mode 100644 index 000000000000..8b5d9f0a1633 --- /dev/null +++ b/arch/arm/mach-ux500/include/mach/irqs-db8500.h @@ -0,0 +1,96 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * Author: Rabin Vincent <rabin.vincent@stericsson.com> + * License terms: GNU General Public License (GPL) version 2 + */ + +#ifndef __MACH_IRQS_DB8500_H +#define __MACH_IRQS_DB8500_H + +#define IRQ_DB8500_MTU0 (IRQ_SHPI_START + 4) +#define IRQ_DB8500_SPI2 (IRQ_SHPI_START + 6) +#define IRQ_DB8500_PMU (IRQ_SHPI_START + 7) +#define IRQ_DB8500_SPI0 (IRQ_SHPI_START + 8) +#define IRQ_DB8500_RTT (IRQ_SHPI_START + 9) +#define IRQ_DB8500_PKA (IRQ_SHPI_START + 10) +#define IRQ_DB8500_UART0 (IRQ_SHPI_START + 11) +#define IRQ_DB8500_I2C3 (IRQ_SHPI_START + 12) +#define IRQ_DB8500_L2CC (IRQ_SHPI_START + 13) +#define IRQ_DB8500_SSP0 (IRQ_SHPI_START + 14) +#define IRQ_DB8500_CRYP1 (IRQ_SHPI_START + 15) +#define IRQ_DB8500_MSP1_RX (IRQ_SHPI_START + 16) +#define IRQ_DB8500_MTU1 (IRQ_SHPI_START + 17) +#define IRQ_DB8500_RTC (IRQ_SHPI_START + 18) +#define IRQ_DB8500_UART1 (IRQ_SHPI_START + 19) +#define IRQ_DB8500_USB_WAKEUP (IRQ_SHPI_START + 20) +#define IRQ_DB8500_I2C0 (IRQ_SHPI_START + 21) +#define IRQ_DB8500_I2C1 (IRQ_SHPI_START + 22) +#define IRQ_DB8500_USBOTG (IRQ_SHPI_START + 23) +#define IRQ_DB8500_DMA_SECURE (IRQ_SHPI_START + 24) +#define IRQ_DB8500_DMA (IRQ_SHPI_START + 25) +#define IRQ_DB8500_UART2 (IRQ_SHPI_START + 26) +#define IRQ_DB8500_ICN_PMU1 (IRQ_SHPI_START + 27) +#define IRQ_DB8500_ICN_PMU2 (IRQ_SHPI_START + 28) +#define IRQ_DB8500_HSIR_EXCEP (IRQ_SHPI_START + 29) +#define IRQ_DB8500_MSP0 (IRQ_SHPI_START + 31) +#define IRQ_DB8500_HSIR_CH0_OVRRUN (IRQ_SHPI_START + 32) +#define IRQ_DB8500_HSIR_CH1_OVRRUN (IRQ_SHPI_START + 33) +#define IRQ_DB8500_HSIR_CH2_OVRRUN (IRQ_SHPI_START + 34) +#define IRQ_DB8500_HSIR_CH3_OVRRUN (IRQ_SHPI_START + 35) +#define IRQ_DB8500_HSIR_CH4_OVRRUN (IRQ_SHPI_START + 36) +#define IRQ_DB8500_HSIR_CH5_OVRRUN (IRQ_SHPI_START + 37) +#define IRQ_DB8500_HSIR_CH6_OVRRUN (IRQ_SHPI_START + 38) +#define IRQ_DB8500_HSIR_CH7_OVRRUN (IRQ_SHPI_START + 39) +#define IRQ_DB8500_AB8500 (IRQ_SHPI_START + 40) +#define IRQ_DB8500_SDMMC2 (IRQ_SHPI_START + 41) +#define IRQ_DB8500_SIA (IRQ_SHPI_START + 42) +#define IRQ_DB8500_SIA2 (IRQ_SHPI_START + 43) +#define IRQ_DB8500_SVA (IRQ_SHPI_START + 44) +#define IRQ_DB8500_SVA2 (IRQ_SHPI_START + 45) +#define IRQ_DB8500_PRCMU0 (IRQ_SHPI_START + 46) +#define IRQ_DB8500_PRCMU1 (IRQ_SHPI_START + 47) +#define IRQ_DB8500_DISP (IRQ_SHPI_START + 48) +#define IRQ_DB8500_SPI3 (IRQ_SHPI_START + 49) +#define IRQ_DB8500_SDMMC1 (IRQ_SHPI_START + 50) +#define IRQ_DB8500_I2C4 (IRQ_SHPI_START + 51) +#define IRQ_DB8500_SSP1 (IRQ_SHPI_START + 52) +#define IRQ_DB8500_SKE (IRQ_SHPI_START + 53) +#define IRQ_DB8500_KB (IRQ_SHPI_START + 54) +#define IRQ_DB8500_I2C2 (IRQ_SHPI_START + 55) +#define IRQ_DB8500_B2R2 (IRQ_SHPI_START + 56) +#define IRQ_DB8500_CRYP0 (IRQ_SHPI_START + 57) +#define IRQ_DB8500_SDMMC3 (IRQ_SHPI_START + 59) +#define IRQ_DB8500_SDMMC0 (IRQ_SHPI_START + 60) +#define IRQ_DB8500_HSEM (IRQ_SHPI_START + 61) +#define IRQ_DB8500_MSP1 (IRQ_SHPI_START + 62) +#define IRQ_DB8500_SBAG (IRQ_SHPI_START + 63) +#define IRQ_DB8500_SPI1 (IRQ_SHPI_START + 96) +#define IRQ_DB8500_SRPTIMER (IRQ_SHPI_START + 97) +#define IRQ_DB8500_MSP2 (IRQ_SHPI_START + 98) +#define IRQ_DB8500_SDMMC4 (IRQ_SHPI_START + 99) +#define IRQ_DB8500_SDMMC5 (IRQ_SHPI_START + 100) +#define IRQ_DB8500_HSIRD0 (IRQ_SHPI_START + 104) +#define IRQ_DB8500_HSIRD1 (IRQ_SHPI_START + 105) +#define IRQ_DB8500_HSITD0 (IRQ_SHPI_START + 106) +#define IRQ_DB8500_HSITD1 (IRQ_SHPI_START + 107) +#define IRQ_DB8500_CTI0 (IRQ_SHPI_START + 108) +#define IRQ_DB8500_CTI1 (IRQ_SHPI_START + 109) +#define IRQ_DB8500_ICN_ERR (IRQ_SHPI_START + 110) +#define IRQ_DB8500_MALI_PPMMU (IRQ_SHPI_START + 112) +#define IRQ_DB8500_MALI_PP (IRQ_SHPI_START + 113) +#define IRQ_DB8500_MALI_GPMMU (IRQ_SHPI_START + 114) +#define IRQ_DB8500_MALI_GP (IRQ_SHPI_START + 115) +#define IRQ_DB8500_MALI (IRQ_SHPI_START + 116) +#define IRQ_DB8500_PRCMU_SEM (IRQ_SHPI_START + 118) +#define IRQ_DB8500_GPIO0 (IRQ_SHPI_START + 119) +#define IRQ_DB8500_GPIO1 (IRQ_SHPI_START + 120) +#define IRQ_DB8500_GPIO2 (IRQ_SHPI_START + 121) +#define IRQ_DB8500_GPIO3 (IRQ_SHPI_START + 122) +#define IRQ_DB8500_GPIO4 (IRQ_SHPI_START + 123) +#define IRQ_DB8500_GPIO5 (IRQ_SHPI_START + 124) +#define IRQ_DB8500_GPIO6 (IRQ_SHPI_START + 125) +#define IRQ_DB8500_GPIO7 (IRQ_SHPI_START + 126) +#define IRQ_DB8500_GPIO8 (IRQ_SHPI_START + 127) + +#endif diff --git a/arch/arm/mach-ux500/include/mach/irqs.h b/arch/arm/mach-ux500/include/mach/irqs.h index 7970684b1d09..10385bdc2b77 100644 --- a/arch/arm/mach-ux500/include/mach/irqs.h +++ b/arch/arm/mach-ux500/include/mach/irqs.h @@ -10,7 +10,8 @@ #ifndef ASM_ARCH_IRQS_H #define ASM_ARCH_IRQS_H -#include <mach/hardware.h> +#include <mach/irqs-db5500.h> +#include <mach/irqs-db8500.h> #define IRQ_LOCALTIMER 29 #define IRQ_LOCALWDOG 30 @@ -67,12 +68,21 @@ /* There are 128 shared peripheral interrupts assigned to * INTID[160:32]. The first 32 interrupts are reserved. */ -#define U8500_SOC_NR_IRQS 161 +#define DBX500_NR_INTERNAL_IRQS 161 /* After chip-specific IRQ numbers we have the GPIO ones */ #define NOMADIK_NR_GPIO 288 -#define NOMADIK_GPIO_TO_IRQ(gpio) ((gpio) + U8500_SOC_NR_IRQS) -#define NOMADIK_IRQ_TO_GPIO(irq) ((irq) - U8500_SOC_NR_IRQS) -#define NR_IRQS NOMADIK_GPIO_TO_IRQ(NOMADIK_NR_GPIO) +#define NOMADIK_GPIO_TO_IRQ(gpio) ((gpio) + DBX500_NR_INTERNAL_IRQS) +#define NOMADIK_IRQ_TO_GPIO(irq) ((irq) - DBX500_NR_INTERNAL_IRQS) +#define IRQ_BOARD_START NOMADIK_GPIO_TO_IRQ(NOMADIK_NR_GPIO) -#endif /*ASM_ARCH_IRQS_H*/ +/* This will be overridden by board-specific irq headers */ +#define IRQ_BOARD_END IRQ_BOARD_START + +#ifdef CONFIG_MACH_U8500_MOP +#include <mach/irqs-board-mop500.h> +#endif + +#define NR_IRQS IRQ_BOARD_END + +#endif /* ASM_ARCH_IRQS_H */ diff --git a/arch/arm/mach-ux500/pins-db8500.h b/arch/arm/mach-ux500/pins-db8500.h new file mode 100644 index 000000000000..9055d5d3233c --- /dev/null +++ b/arch/arm/mach-ux500/pins-db8500.h @@ -0,0 +1,742 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * License terms: GNU General Public License, version 2 + * Author: Rabin Vincent <rabin.vincent@stericsson.com> + */ + +#ifndef __MACH_PINS_DB8500_H +#define __MACH_PINS_DB8500_H + +/* + * TODO: Eventually encode all non-board specific pull up/down configuration + * here. + */ + +#define GPIO0_GPIO PIN_CFG(0, GPIO) +#define GPIO0_U0_CTSn PIN_CFG(0, ALT_A) +#define GPIO0_TRIG_OUT PIN_CFG(0, ALT_B) +#define GPIO0_IP_TDO PIN_CFG(0, ALT_C) + +#define GPIO1_GPIO PIN_CFG(1, GPIO) +#define GPIO1_U0_RTSn PIN_CFG(1, ALT_A) +#define GPIO1_TRIG_IN PIN_CFG(1, ALT_B) +#define GPIO1_IP_TDI PIN_CFG(1, ALT_C) + +#define GPIO2_GPIO PIN_CFG(2, GPIO) +#define GPIO2_U0_RXD PIN_CFG(2, ALT_A) +#define GPIO2_NONE PIN_CFG(2, ALT_B) +#define GPIO2_IP_TMS PIN_CFG(2, ALT_C) + +#define GPIO3_GPIO PIN_CFG(3, GPIO) +#define GPIO3_U0_TXD PIN_CFG(3, ALT_A) +#define GPIO3_NONE PIN_CFG(3, ALT_B) +#define GPIO3_IP_TCK PIN_CFG(3, ALT_C) + +#define GPIO4_GPIO PIN_CFG(4, GPIO) +#define GPIO4_U1_RXD PIN_CFG(4, ALT_A) +#define GPIO4_I2C4_SCL PIN_CFG_PULL(4, ALT_B, UP) +#define GPIO4_IP_TRSTn PIN_CFG(4, ALT_C) + +#define GPIO5_GPIO PIN_CFG(5, GPIO) +#define GPIO5_U1_TXD PIN_CFG(5, ALT_A) +#define GPIO5_I2C4_SDA PIN_CFG_PULL(5, ALT_B, UP) +#define GPIO5_IP_GPIO6 PIN_CFG(5, ALT_C) + +#define GPIO6_GPIO PIN_CFG(6, GPIO) +#define GPIO6_U1_CTSn PIN_CFG(6, ALT_A) +#define GPIO6_I2C1_SCL PIN_CFG_PULL(6, ALT_B, UP) +#define GPIO6_IP_GPIO0 PIN_CFG(6, ALT_C) + +#define GPIO7_GPIO PIN_CFG(7, GPIO) +#define GPIO7_U1_RTSn PIN_CFG(7, ALT_A) +#define GPIO7_I2C1_SDA PIN_CFG_PULL(7, ALT_B, UP) +#define GPIO7_IP_GPIO1 PIN_CFG(7, ALT_C) + +#define GPIO8_GPIO PIN_CFG(8, GPIO) +#define GPIO8_IPI2C_SDA PIN_CFG_PULL(8, ALT_A, UP) +#define GPIO8_I2C2_SDA PIN_CFG_PULL(8, ALT_B, UP) + +#define GPIO9_GPIO PIN_CFG(9, GPIO) +#define GPIO9_IPI2C_SCL PIN_CFG_PULL(9, ALT_A, UP) +#define GPIO9_I2C2_SCL PIN_CFG_PULL(9, ALT_B, UP) + +#define GPIO10_GPIO PIN_CFG(10, GPIO) +#define GPIO10_IPI2C_SDA PIN_CFG_PULL(10, ALT_A, UP) +#define GPIO10_I2C2_SDA PIN_CFG_PULL(10, ALT_B, UP) +#define GPIO10_IP_GPIO3 PIN_CFG(10, ALT_C) + +#define GPIO11_GPIO PIN_CFG(11, GPIO) +#define GPIO11_IPI2C_SCL PIN_CFG_PULL(11, ALT_A, UP) +#define GPIO11_I2C2_SCL PIN_CFG_PULL(11, ALT_B, UP) +#define GPIO11_IP_GPIO2 PIN_CFG(11, ALT_C) + +#define GPIO12_GPIO PIN_CFG(12, GPIO) +#define GPIO12_MSP0_TXD PIN_CFG(12, ALT_A) +#define GPIO12_MSP0_RXD PIN_CFG(12, ALT_B) + +#define GPIO13_GPIO PIN_CFG(13, GPIO) +#define GPIO13_MSP0_TFS PIN_CFG(13, ALT_A) + +#define GPIO14_GPIO PIN_CFG(14, GPIO) +#define GPIO14_MSP0_TCK PIN_CFG(14, ALT_A) + +#define GPIO15_GPIO PIN_CFG(15, GPIO) +#define GPIO15_MSP0_RXD PIN_CFG(15, ALT_A) +#define GPIO15_MSP0_TXD PIN_CFG(15, ALT_B) + +#define GPIO16_GPIO PIN_CFG(16, GPIO) +#define GPIO16_MSP0_RFS PIN_CFG(16, ALT_A) +#define GPIO16_I2C1_SCL PIN_CFG_PULL(16, ALT_B, UP) +#define GPIO16_SLIM0_DAT PIN_CFG(16, ALT_C) + +#define GPIO17_GPIO PIN_CFG(17, GPIO) +#define GPIO17_MSP0_RCK PIN_CFG(17, ALT_A) +#define GPIO17_I2C1_SDA PIN_CFG_PULL(17, ALT_B, UP) +#define GPIO17_SLIM0_CLK PIN_CFG(17, ALT_C) + +#define GPIO18_GPIO PIN_CFG(18, GPIO) +#define GPIO18_MC0_CMDDIR PIN_CFG(18, ALT_A) +#define GPIO18_U2_RXD PIN_CFG(18, ALT_B) +#define GPIO18_MS_IEP PIN_CFG(18, ALT_C) + +#define GPIO19_GPIO PIN_CFG(19, GPIO) +#define GPIO19_MC0_DAT0DIR PIN_CFG(19, ALT_A) +#define GPIO19_U2_TXD PIN_CFG(19, ALT_B) +#define GPIO19_MS_DAT0DIR PIN_CFG(19, ALT_C) + +#define GPIO20_GPIO PIN_CFG(20, GPIO) +#define GPIO20_MC0_DAT2DIR PIN_CFG(20, ALT_A) +#define GPIO20_UARTMOD_TXD PIN_CFG(20, ALT_B) +#define GPIO20_IP_TRIGOUT PIN_CFG(20, ALT_C) + +#define GPIO21_GPIO PIN_CFG(21, GPIO) +#define GPIO21_MC0_DAT31DIR PIN_CFG(21, ALT_A) +#define GPIO21_MSP0_SCK PIN_CFG(21, ALT_B) +#define GPIO21_MS_DAT31DIR PIN_CFG(21, ALT_C) + +#define GPIO22_GPIO PIN_CFG(22, GPIO) +#define GPIO22_MC0_FBCLK PIN_CFG(22, ALT_A) +#define GPIO22_UARTMOD_RXD PIN_CFG(22, ALT_B) +#define GPIO22_MS_FBCLK PIN_CFG(22, ALT_C) + +#define GPIO23_GPIO PIN_CFG(23, GPIO) +#define GPIO23_MC0_CLK PIN_CFG(23, ALT_A) +#define GPIO23_STMMOD_CLK PIN_CFG(23, ALT_B) +#define GPIO23_MS_CLK PIN_CFG(23, ALT_C) + +#define GPIO24_GPIO PIN_CFG(24, GPIO) +#define GPIO24_MC0_CMD PIN_CFG(24, ALT_A) +#define GPIO24_UARTMOD_RXD PIN_CFG(24, ALT_B) +#define GPIO24_MS_BS PIN_CFG(24, ALT_C) + +#define GPIO25_GPIO PIN_CFG(25, GPIO) +#define GPIO25_MC0_DAT0 PIN_CFG(25, ALT_A) +#define GPIO25_STMMOD_DAT0 PIN_CFG(25, ALT_B) +#define GPIO25_MS_DAT0 PIN_CFG(25, ALT_C) + +#define GPIO26_GPIO PIN_CFG(26, GPIO) +#define GPIO26_MC0_DAT1 PIN_CFG(26, ALT_A) +#define GPIO26_STMMOD_DAT1 PIN_CFG(26, ALT_B) +#define GPIO26_MS_DAT1 PIN_CFG(26, ALT_C) + +#define GPIO27_GPIO PIN_CFG(27, GPIO) +#define GPIO27_MC0_DAT2 PIN_CFG(27, ALT_A) +#define GPIO27_STMMOD_DAT2 PIN_CFG(27, ALT_B) +#define GPIO27_MS_DAT2 PIN_CFG(27, ALT_C) + +#define GPIO28_GPIO PIN_CFG(28, GPIO) +#define GPIO28_MC0_DAT3 PIN_CFG(28, ALT_A) +#define GPIO28_STMMOD_DAT3 PIN_CFG(28, ALT_B) +#define GPIO28_MS_DAT3 PIN_CFG(28, ALT_C) + +#define GPIO29_GPIO PIN_CFG(29, GPIO) +#define GPIO29_MC0_DAT4 PIN_CFG(29, ALT_A) +#define GPIO29_SPI3_CLK PIN_CFG(29, ALT_B) +#define GPIO29_U2_RXD PIN_CFG(29, ALT_C) + +#define GPIO30_GPIO PIN_CFG(30, GPIO) +#define GPIO30_MC0_DAT5 PIN_CFG(30, ALT_A) +#define GPIO30_SPI3_RXD PIN_CFG(30, ALT_B) +#define GPIO30_U2_TXD PIN_CFG(30, ALT_C) + +#define GPIO31_GPIO PIN_CFG(31, GPIO) +#define GPIO31_MC0_DAT6 PIN_CFG(31, ALT_A) +#define GPIO31_SPI3_FRM PIN_CFG(31, ALT_B) +#define GPIO31_U2_CTSn PIN_CFG(31, ALT_C) + +#define GPIO32_GPIO PIN_CFG(32, GPIO) +#define GPIO32_MC0_DAT7 PIN_CFG(32, ALT_A) +#define GPIO32_SPI3_TXD PIN_CFG(32, ALT_B) +#define GPIO32_U2_RTSn PIN_CFG(32, ALT_C) + +#define GPIO33_GPIO PIN_CFG(33, GPIO) +#define GPIO33_MSP1_TXD PIN_CFG(33, ALT_A) +#define GPIO33_MSP1_RXD PIN_CFG(33, ALT_B) +#define GPIO33_U0_DTRn PIN_CFG(33, ALT_C) + +#define GPIO34_GPIO PIN_CFG(34, GPIO) +#define GPIO34_MSP1_TFS PIN_CFG(34, ALT_A) +#define GPIO34_NONE PIN_CFG(34, ALT_B) +#define GPIO34_U0_DCDn PIN_CFG(34, ALT_C) + +#define GPIO35_GPIO PIN_CFG(35, GPIO) +#define GPIO35_MSP1_TCK PIN_CFG(35, ALT_A) +#define GPIO35_NONE PIN_CFG(35, ALT_B) +#define GPIO35_U0_DSRn PIN_CFG(35, ALT_C) + +#define GPIO36_GPIO PIN_CFG(36, GPIO) +#define GPIO36_MSP1_RXD PIN_CFG(36, ALT_A) +#define GPIO36_MSP1_TXD PIN_CFG(36, ALT_B) +#define GPIO36_U0_RIn PIN_CFG(36, ALT_C) + +#define GPIO64_GPIO PIN_CFG(64, GPIO) +#define GPIO64_LCDB_DE PIN_CFG(64, ALT_A) +#define GPIO64_KP_O1 PIN_CFG(64, ALT_B) +#define GPIO64_IP_GPIO4 PIN_CFG(64, ALT_C) + +#define GPIO65_GPIO PIN_CFG(65, GPIO) +#define GPIO65_LCDB_HSO PIN_CFG(65, ALT_A) +#define GPIO65_KP_O0 PIN_CFG(65, ALT_B) +#define GPIO65_IP_GPIO5 PIN_CFG(65, ALT_C) + +#define GPIO66_GPIO PIN_CFG(66, GPIO) +#define GPIO66_LCDB_VSO PIN_CFG(66, ALT_A) +#define GPIO66_KP_I1 PIN_CFG(66, ALT_B) +#define GPIO66_IP_GPIO6 PIN_CFG(66, ALT_C) + +#define GPIO67_GPIO PIN_CFG(67, GPIO) +#define GPIO67_LCDB_CLK PIN_CFG(67, ALT_A) +#define GPIO67_KP_I0 PIN_CFG(67, ALT_B) +#define GPIO67_IP_GPIO7 PIN_CFG(67, ALT_C) + +#define GPIO68_GPIO PIN_CFG(68, GPIO) +#define GPIO68_LCD_VSI0 PIN_CFG(68, ALT_A) +#define GPIO68_KP_O7 PIN_CFG(68, ALT_B) +#define GPIO68_SM_CLE PIN_CFG(68, ALT_C) + +#define GPIO69_GPIO PIN_CFG(69, GPIO) +#define GPIO69_LCD_VSI1 PIN_CFG(69, ALT_A) +#define GPIO69_KP_I7 PIN_CFG(69, ALT_B) +#define GPIO69_SM_ALE PIN_CFG(69, ALT_C) + +#define GPIO70_GPIO PIN_CFG(70, GPIO) +#define GPIO70_LCD_D0 PIN_CFG(70, ALT_A) +#define GPIO70_KP_O5 PIN_CFG(70, ALT_B) +#define GPIO70_STMAPE_CLK PIN_CFG(70, ALT_C) + +#define GPIO71_GPIO PIN_CFG(71, GPIO) +#define GPIO71_LCD_D1 PIN_CFG(71, ALT_A) +#define GPIO71_KP_O4 PIN_CFG(71, ALT_B) +#define GPIO71_STMAPE_DAT3 PIN_CFG(71, ALT_C) + +#define GPIO72_GPIO PIN_CFG(72, GPIO) +#define GPIO72_LCD_D2 PIN_CFG(72, ALT_A) +#define GPIO72_KP_O3 PIN_CFG(72, ALT_B) +#define GPIO72_STMAPE_DAT2 PIN_CFG(72, ALT_C) + +#define GPIO73_GPIO PIN_CFG(73, GPIO) +#define GPIO73_LCD_D3 PIN_CFG(73, ALT_A) +#define GPIO73_KP_O2 PIN_CFG(73, ALT_B) +#define GPIO73_STMAPE_DAT1 PIN_CFG(73, ALT_C) + +#define GPIO74_GPIO PIN_CFG(74, GPIO) +#define GPIO74_LCD_D4 PIN_CFG(74, ALT_A) +#define GPIO74_KP_I5 PIN_CFG(74, ALT_B) +#define GPIO74_STMAPE_DAT0 PIN_CFG(74, ALT_C) + +#define GPIO75_GPIO PIN_CFG(75, GPIO) +#define GPIO75_LCD_D5 PIN_CFG(75, ALT_A) +#define GPIO75_KP_I4 PIN_CFG(75, ALT_B) +#define GPIO75_U2_RXD PIN_CFG(75, ALT_C) + +#define GPIO76_GPIO PIN_CFG(76, GPIO) +#define GPIO76_LCD_D6 PIN_CFG(76, ALT_A) +#define GPIO76_KP_I3 PIN_CFG(76, ALT_B) +#define GPIO76_U2_TXD PIN_CFG(76, ALT_C) + +#define GPIO77_GPIO PIN_CFG(77, GPIO) +#define GPIO77_LCD_D7 PIN_CFG(77, ALT_A) +#define GPIO77_KP_I2 PIN_CFG(77, ALT_B) +#define GPIO77_NONE PIN_CFG(77, ALT_C) + +#define GPIO78_GPIO PIN_CFG(78, GPIO) +#define GPIO78_LCD_D8 PIN_CFG(78, ALT_A) +#define GPIO78_KP_O6 PIN_CFG(78, ALT_B) +#define GPIO78_IP_GPIO2 PIN_CFG(78, ALT_C) + +#define GPIO79_GPIO PIN_CFG(79, GPIO) +#define GPIO79_LCD_D9 PIN_CFG(79, ALT_A) +#define GPIO79_KP_I6 PIN_CFG(79, ALT_B) +#define GPIO79_IP_GPIO3 PIN_CFG(79, ALT_C) + +#define GPIO80_GPIO PIN_CFG(80, GPIO) +#define GPIO80_LCD_D10 PIN_CFG(80, ALT_A) +#define GPIO80_KP_SKA0 PIN_CFG(80, ALT_B) +#define GPIO80_IP_GPIO4 PIN_CFG(80, ALT_C) + +#define GPIO81_GPIO PIN_CFG(81, GPIO) +#define GPIO81_LCD_D11 PIN_CFG(81, ALT_A) +#define GPIO81_KP_SKB0 PIN_CFG(81, ALT_B) +#define GPIO81_IP_GPIO5 PIN_CFG(81, ALT_C) + +#define GPIO82_GPIO PIN_CFG(82, GPIO) +#define GPIO82_LCD_D12 PIN_CFG(82, ALT_A) +#define GPIO82_KP_O5 PIN_CFG(82, ALT_B) + +#define GPIO83_GPIO PIN_CFG(83, GPIO) +#define GPIO83_LCD_D13 PIN_CFG(83, ALT_A) +#define GPIO83_KP_O4 PIN_CFG(83, ALT_B) + +#define GPIO84_GPIO PIN_CFG(84, GPIO) +#define GPIO84_LCD_D14 PIN_CFG(84, ALT_A) +#define GPIO84_KP_I5 PIN_CFG(84, ALT_B) + +#define GPIO85_GPIO PIN_CFG(85, GPIO) +#define GPIO85_LCD_D15 PIN_CFG(85, ALT_A) +#define GPIO85_KP_I4 PIN_CFG(85, ALT_B) + +#define GPIO86_GPIO PIN_CFG(86, GPIO) +#define GPIO86_LCD_D16 PIN_CFG(86, ALT_A) +#define GPIO86_SM_ADQ0 PIN_CFG(86, ALT_B) +#define GPIO86_MC5_DAT0 PIN_CFG(86, ALT_C) + +#define GPIO87_GPIO PIN_CFG(87, GPIO) +#define GPIO87_LCD_D17 PIN_CFG(87, ALT_A) +#define GPIO87_SM_ADQ1 PIN_CFG(87, ALT_B) +#define GPIO87_MC5_DAT1 PIN_CFG(87, ALT_C) + +#define GPIO88_GPIO PIN_CFG(88, GPIO) +#define GPIO88_LCD_D18 PIN_CFG(88, ALT_A) +#define GPIO88_SM_ADQ2 PIN_CFG(88, ALT_B) +#define GPIO88_MC5_DAT2 PIN_CFG(88, ALT_C) + +#define GPIO89_GPIO PIN_CFG(89, GPIO) +#define GPIO89_LCD_D19 PIN_CFG(89, ALT_A) +#define GPIO89_SM_ADQ3 PIN_CFG(89, ALT_B) +#define GPIO89_MC5_DAT3 PIN_CFG(89, ALT_C) + +#define GPIO90_GPIO PIN_CFG(90, GPIO) +#define GPIO90_LCD_D20 PIN_CFG(90, ALT_A) +#define GPIO90_SM_ADQ4 PIN_CFG(90, ALT_B) +#define GPIO90_MC5_CMD PIN_CFG(90, ALT_C) + +#define GPIO91_GPIO PIN_CFG(91, GPIO) +#define GPIO91_LCD_D21 PIN_CFG(91, ALT_A) +#define GPIO91_SM_ADQ5 PIN_CFG(91, ALT_B) +#define GPIO91_MC5_FBCLK PIN_CFG(91, ALT_C) + +#define GPIO92_GPIO PIN_CFG(92, GPIO) +#define GPIO92_LCD_D22 PIN_CFG(92, ALT_A) +#define GPIO92_SM_ADQ6 PIN_CFG(92, ALT_B) +#define GPIO92_MC5_CLK PIN_CFG(92, ALT_C) + +#define GPIO93_GPIO PIN_CFG(93, GPIO) +#define GPIO93_LCD_D23 PIN_CFG(93, ALT_A) +#define GPIO93_SM_ADQ7 PIN_CFG(93, ALT_B) +#define GPIO93_MC5_DAT4 PIN_CFG(93, ALT_C) + +#define GPIO94_GPIO PIN_CFG(94, GPIO) +#define GPIO94_KP_O7 PIN_CFG(94, ALT_A) +#define GPIO94_SM_ADVn PIN_CFG(94, ALT_B) +#define GPIO94_MC5_DAT5 PIN_CFG(94, ALT_C) + +#define GPIO95_GPIO PIN_CFG(95, GPIO) +#define GPIO95_KP_I7 PIN_CFG(95, ALT_A) +#define GPIO95_SM_CS0n PIN_CFG(95, ALT_B) +#define GPIO95_SM_PS0n PIN_CFG(95, ALT_C) + +#define GPIO96_GPIO PIN_CFG(96, GPIO) +#define GPIO96_KP_O6 PIN_CFG(96, ALT_A) +#define GPIO96_SM_OEn PIN_CFG(96, ALT_B) +#define GPIO96_MC5_DAT6 PIN_CFG(96, ALT_C) + +#define GPIO97_GPIO PIN_CFG(97, GPIO) +#define GPIO97_KP_I6 PIN_CFG(97, ALT_A) +#define GPIO97_SM_WEn PIN_CFG(97, ALT_B) +#define GPIO97_MC5_DAT7 PIN_CFG(97, ALT_C) + +#define GPIO128_GPIO PIN_CFG(128, GPIO) +#define GPIO128_MC2_CLK PIN_CFG(128, ALT_A) +#define GPIO128_SM_CKO PIN_CFG(128, ALT_B) + +#define GPIO129_GPIO PIN_CFG(129, GPIO) +#define GPIO129_MC2_CMD PIN_CFG(129, ALT_A) +#define GPIO129_SM_WAIT0n PIN_CFG(129, ALT_B) + +#define GPIO130_GPIO PIN_CFG(130, GPIO) +#define GPIO130_MC2_FBCLK PIN_CFG(130, ALT_A) +#define GPIO130_SM_FBCLK PIN_CFG(130, ALT_B) +#define GPIO130_MC2_RSTN PIN_CFG(130, ALT_C) + +#define GPIO131_GPIO PIN_CFG(131, GPIO) +#define GPIO131_MC2_DAT0 PIN_CFG(131, ALT_A) +#define GPIO131_SM_ADQ8 PIN_CFG(131, ALT_B) + +#define GPIO132_GPIO PIN_CFG(132, GPIO) +#define GPIO132_MC2_DAT1 PIN_CFG(132, ALT_A) +#define GPIO132_SM_ADQ9 PIN_CFG(132, ALT_B) + +#define GPIO133_GPIO PIN_CFG(133, GPIO) +#define GPIO133_MC2_DAT2 PIN_CFG(133, ALT_A) +#define GPIO133_SM_ADQ10 PIN_CFG(133, ALT_B) + +#define GPIO134_GPIO PIN_CFG(134, GPIO) +#define GPIO134_MC2_DAT3 PIN_CFG(134, ALT_A) +#define GPIO134_SM_ADQ11 PIN_CFG(134, ALT_B) + +#define GPIO135_GPIO PIN_CFG(135, GPIO) +#define GPIO135_MC2_DAT4 PIN_CFG(135, ALT_A) +#define GPIO135_SM_ADQ12 PIN_CFG(135, ALT_B) + +#define GPIO136_GPIO PIN_CFG(136, GPIO) +#define GPIO136_MC2_DAT5 PIN_CFG(136, ALT_A) +#define GPIO136_SM_ADQ13 PIN_CFG(136, ALT_B) + +#define GPIO137_GPIO PIN_CFG(137, GPIO) +#define GPIO137_MC2_DAT6 PIN_CFG(137, ALT_A) +#define GPIO137_SM_ADQ14 PIN_CFG(137, ALT_B) + +#define GPIO138_GPIO PIN_CFG(138, GPIO) +#define GPIO138_MC2_DAT7 PIN_CFG(138, ALT_A) +#define GPIO138_SM_ADQ15 PIN_CFG(138, ALT_B) + +#define GPIO139_GPIO PIN_CFG(139, GPIO) +#define GPIO139_SSP1_RXD PIN_CFG(139, ALT_A) +#define GPIO139_SM_WAIT1n PIN_CFG(139, ALT_B) +#define GPIO139_KP_O8 PIN_CFG(139, ALT_C) + +#define GPIO140_GPIO PIN_CFG(140, GPIO) +#define GPIO140_SSP1_TXD PIN_CFG(140, ALT_A) +#define GPIO140_IP_GPIO7 PIN_CFG(140, ALT_B) +#define GPIO140_KP_SKA1 PIN_CFG(140, ALT_C) + +#define GPIO141_GPIO PIN_CFG(141, GPIO) +#define GPIO141_SSP1_CLK PIN_CFG(141, ALT_A) +#define GPIO141_IP_GPIO2 PIN_CFG(141, ALT_B) +#define GPIO141_KP_O9 PIN_CFG(141, ALT_C) + +#define GPIO142_GPIO PIN_CFG(142, GPIO) +#define GPIO142_SSP1_FRM PIN_CFG(142, ALT_A) +#define GPIO142_IP_GPIO3 PIN_CFG(142, ALT_B) +#define GPIO142_KP_SKB1 PIN_CFG(142, ALT_C) + +#define GPIO143_GPIO PIN_CFG(143, GPIO) +#define GPIO143_SSP0_CLK PIN_CFG(143, ALT_A) + +#define GPIO144_GPIO PIN_CFG(144, GPIO) +#define GPIO144_SSP0_FRM PIN_CFG(144, ALT_A) + +#define GPIO145_GPIO PIN_CFG(145, GPIO) +#define GPIO145_SSP0_RXD PIN_CFG(145, ALT_A) + +#define GPIO146_GPIO PIN_CFG(146, GPIO) +#define GPIO146_SSP0_TXD PIN_CFG(146, ALT_A) + +#define GPIO147_GPIO PIN_CFG(147, GPIO) +#define GPIO147_I2C0_SCL PIN_CFG_PULL(147, ALT_A, UP) + +#define GPIO148_GPIO PIN_CFG(148, GPIO) +#define GPIO148_I2C0_SDA PIN_CFG_PULL(148, ALT_A, UP) + +#define GPIO149_GPIO PIN_CFG(149, GPIO) +#define GPIO149_IP_GPIO0 PIN_CFG(149, ALT_A) +#define GPIO149_SM_CS1n PIN_CFG(149, ALT_B) +#define GPIO149_SM_PS1n PIN_CFG(149, ALT_C) + +#define GPIO150_GPIO PIN_CFG(150, GPIO) +#define GPIO150_IP_GPIO1 PIN_CFG(150, ALT_A) +#define GPIO150_LCDA_CLK PIN_CFG(150, ALT_B) + +#define GPIO151_GPIO PIN_CFG(151, GPIO) +#define GPIO151_KP_SKA0 PIN_CFG(151, ALT_A) +#define GPIO151_LCD_VSI0 PIN_CFG(151, ALT_B) +#define GPIO151_KP_O8 PIN_CFG(151, ALT_C) + +#define GPIO152_GPIO PIN_CFG(152, GPIO) +#define GPIO152_KP_SKB0 PIN_CFG(152, ALT_A) +#define GPIO152_LCD_VSI1 PIN_CFG(152, ALT_B) +#define GPIO152_KP_O9 PIN_CFG(152, ALT_C) + +#define GPIO153_GPIO PIN_CFG(153, GPIO) +#define GPIO153_KP_I7 PIN_CFG(153, ALT_A) +#define GPIO153_LCD_D24 PIN_CFG(153, ALT_B) +#define GPIO153_U2_RXD PIN_CFG(153, ALT_C) + +#define GPIO154_GPIO PIN_CFG(154, GPIO) +#define GPIO154_KP_I6 PIN_CFG(154, ALT_A) +#define GPIO154_LCD_D25 PIN_CFG(154, ALT_B) +#define GPIO154_U2_TXD PIN_CFG(154, ALT_C) + +#define GPIO155_GPIO PIN_CFG(155, GPIO) +#define GPIO155_KP_I5 PIN_CFG(155, ALT_A) +#define GPIO155_LCD_D26 PIN_CFG(155, ALT_B) +#define GPIO155_STMAPE_CLK PIN_CFG(155, ALT_C) + +#define GPIO156_GPIO PIN_CFG(156, GPIO) +#define GPIO156_KP_I4 PIN_CFG(156, ALT_A) +#define GPIO156_LCD_D27 PIN_CFG(156, ALT_B) +#define GPIO156_STMAPE_DAT3 PIN_CFG(156, ALT_C) + +#define GPIO157_GPIO PIN_CFG(157, GPIO) +#define GPIO157_KP_O7 PIN_CFG(157, ALT_A) +#define GPIO157_LCD_D28 PIN_CFG(157, ALT_B) +#define GPIO157_STMAPE_DAT2 PIN_CFG(157, ALT_C) + +#define GPIO158_GPIO PIN_CFG(158, GPIO) +#define GPIO158_KP_O6 PIN_CFG(158, ALT_A) +#define GPIO158_LCD_D29 PIN_CFG(158, ALT_B) +#define GPIO158_STMAPE_DAT1 PIN_CFG(158, ALT_C) + +#define GPIO159_GPIO PIN_CFG(159, GPIO) +#define GPIO159_KP_O5 PIN_CFG(159, ALT_A) +#define GPIO159_LCD_D30 PIN_CFG(159, ALT_B) +#define GPIO159_STMAPE_DAT0 PIN_CFG(159, ALT_C) + +#define GPIO160_GPIO PIN_CFG(160, GPIO) +#define GPIO160_KP_O4 PIN_CFG(160, ALT_A) +#define GPIO160_LCD_D31 PIN_CFG(160, ALT_B) +#define GPIO160_NONE PIN_CFG(160, ALT_C) + +#define GPIO161_GPIO PIN_CFG(161, GPIO) +#define GPIO161_KP_I3 PIN_CFG(161, ALT_A) +#define GPIO161_LCD_D32 PIN_CFG(161, ALT_B) +#define GPIO161_UARTMOD_RXD PIN_CFG(161, ALT_C) + +#define GPIO162_GPIO PIN_CFG(162, GPIO) +#define GPIO162_KP_I2 PIN_CFG(162, ALT_A) +#define GPIO162_LCD_D33 PIN_CFG(162, ALT_B) +#define GPIO162_UARTMOD_TXD PIN_CFG(162, ALT_C) + +#define GPIO163_GPIO PIN_CFG(163, GPIO) +#define GPIO163_KP_I1 PIN_CFG(163, ALT_A) +#define GPIO163_LCD_D34 PIN_CFG(163, ALT_B) +#define GPIO163_STMMOD_CLK PIN_CFG(163, ALT_C) + +#define GPIO164_GPIO PIN_CFG(164, GPIO) +#define GPIO164_KP_I0 PIN_CFG(164, ALT_A) +#define GPIO164_LCD_D35 PIN_CFG(164, ALT_B) +#define GPIO164_STMMOD_DAT3 PIN_CFG(164, ALT_C) + +#define GPIO165_GPIO PIN_CFG(165, GPIO) +#define GPIO165_KP_O3 PIN_CFG(165, ALT_A) +#define GPIO165_LCD_D36 PIN_CFG(165, ALT_B) +#define GPIO165_STMMOD_DAT2 PIN_CFG(165, ALT_C) + +#define GPIO166_GPIO PIN_CFG(166, GPIO) +#define GPIO166_KP_O2 PIN_CFG(166, ALT_A) +#define GPIO166_LCD_D37 PIN_CFG(166, ALT_B) +#define GPIO166_STMMOD_DAT1 PIN_CFG(166, ALT_C) + +#define GPIO167_GPIO PIN_CFG(167, GPIO) +#define GPIO167_KP_O1 PIN_CFG(167, ALT_A) +#define GPIO167_LCD_D38 PIN_CFG(167, ALT_B) +#define GPIO167_STMMOD_DAT0 PIN_CFG(167, ALT_C) + +#define GPIO168_GPIO PIN_CFG(168, GPIO) +#define GPIO168_KP_O0 PIN_CFG(168, ALT_A) +#define GPIO168_LCD_D39 PIN_CFG(168, ALT_B) +#define GPIO168_NONE PIN_CFG(168, ALT_C) + +#define GPIO169_GPIO PIN_CFG(169, GPIO) +#define GPIO169_RF_PURn PIN_CFG(169, ALT_A) +#define GPIO169_LCDA_DE PIN_CFG(169, ALT_B) +#define GPIO169_USBSIM_PDC PIN_CFG(169, ALT_C) + +#define GPIO170_GPIO PIN_CFG(170, GPIO) +#define GPIO170_MODEM_STATE PIN_CFG(170, ALT_A) +#define GPIO170_LCDA_VSO PIN_CFG(170, ALT_B) +#define GPIO170_KP_SKA1 PIN_CFG(170, ALT_C) + +#define GPIO171_GPIO PIN_CFG(171, GPIO) +#define GPIO171_MODEM_PWREN PIN_CFG(171, ALT_A) +#define GPIO171_LCDA_HSO PIN_CFG(171, ALT_B) +#define GPIO171_KP_SKB1 PIN_CFG(171, ALT_C) + +#define GPIO192_GPIO PIN_CFG(192, GPIO) +#define GPIO192_MSP2_SCK PIN_CFG(192, ALT_A) + +#define GPIO193_GPIO PIN_CFG(193, GPIO) +#define GPIO193_MSP2_TXD PIN_CFG(193, ALT_A) + +#define GPIO194_GPIO PIN_CFG(194, GPIO) +#define GPIO194_MSP2_TCK PIN_CFG(194, ALT_A) + +#define GPIO195_GPIO PIN_CFG(195, GPIO) +#define GPIO195_MSP2_TFS PIN_CFG(195, ALT_A) + +#define GPIO196_GPIO PIN_CFG(196, GPIO) +#define GPIO196_MSP2_RXD PIN_CFG(196, ALT_A) + +#define GPIO197_GPIO PIN_CFG(197, GPIO) +#define GPIO197_MC4_DAT3 PIN_CFG(197, ALT_A) + +#define GPIO198_GPIO PIN_CFG(198, GPIO) +#define GPIO198_MC4_DAT2 PIN_CFG(198, ALT_A) + +#define GPIO199_GPIO PIN_CFG(199, GPIO) +#define GPIO199_MC4_DAT1 PIN_CFG(199, ALT_A) + +#define GPIO200_GPIO PIN_CFG(200, GPIO) +#define GPIO200_MC4_DAT0 PIN_CFG(200, ALT_A) + +#define GPIO201_GPIO PIN_CFG(201, GPIO) +#define GPIO201_MC4_CMD PIN_CFG(201, ALT_A) + +#define GPIO202_GPIO PIN_CFG(202, GPIO) +#define GPIO202_MC4_FBCLK PIN_CFG(202, ALT_A) +#define GPIO202_PWL PIN_CFG(202, ALT_B) +#define GPIO202_MC4_RSTN PIN_CFG(202, ALT_C) + +#define GPIO203_GPIO PIN_CFG(203, GPIO) +#define GPIO203_MC4_CLK PIN_CFG(203, ALT_A) + +#define GPIO204_GPIO PIN_CFG(204, GPIO) +#define GPIO204_MC4_DAT7 PIN_CFG(204, ALT_A) + +#define GPIO205_GPIO PIN_CFG(205, GPIO) +#define GPIO205_MC4_DAT6 PIN_CFG(205, ALT_A) + +#define GPIO206_GPIO PIN_CFG(206, GPIO) +#define GPIO206_MC4_DAT5 PIN_CFG(206, ALT_A) + +#define GPIO207_GPIO PIN_CFG(207, GPIO) +#define GPIO207_MC4_DAT4 PIN_CFG(207, ALT_A) + +#define GPIO208_GPIO PIN_CFG(208, GPIO) +#define GPIO208_MC1_CLK PIN_CFG(208, ALT_A) + +#define GPIO209_GPIO PIN_CFG(209, GPIO) +#define GPIO209_MC1_FBCLK PIN_CFG(209, ALT_A) +#define GPIO209_SPI1_CLK PIN_CFG(209, ALT_B) + +#define GPIO210_GPIO PIN_CFG(210, GPIO) +#define GPIO210_MC1_CMD PIN_CFG(210, ALT_A) + +#define GPIO211_GPIO PIN_CFG(211, GPIO) +#define GPIO211_MC1_DAT0 PIN_CFG(211, ALT_A) + +#define GPIO212_GPIO PIN_CFG(212, GPIO) +#define GPIO212_MC1_DAT1 PIN_CFG(212, ALT_A) +#define GPIO212_SPI1_FRM PIN_CFG(212, ALT_B) + +#define GPIO213_GPIO PIN_CFG(213, GPIO) +#define GPIO213_MC1_DAT2 PIN_CFG(213, ALT_A) +#define GPIO213_SPI1_TXD PIN_CFG(213, ALT_B) + +#define GPIO214_GPIO PIN_CFG(214, GPIO) +#define GPIO214_MC1_DAT3 PIN_CFG(214, ALT_A) +#define GPIO214_SPI1_RXD PIN_CFG(214, ALT_B) + +#define GPIO215_GPIO PIN_CFG(215, GPIO) +#define GPIO215_MC1_CMDDIR PIN_CFG(215, ALT_A) +#define GPIO215_MC3_DAT2DIR PIN_CFG(215, ALT_B) +#define GPIO215_CLKOUT1 PIN_CFG(215, ALT_C) + +#define GPIO216_GPIO PIN_CFG(216, GPIO) +#define GPIO216_MC1_DAT2DIR PIN_CFG(216, ALT_A) +#define GPIO216_MC3_CMDDIR PIN_CFG(216, ALT_B) +#define GPIO216_I2C3_SDA PIN_CFG_PULL(216, ALT_C, UP) + +#define GPIO217_GPIO PIN_CFG(217, GPIO) +#define GPIO217_MC1_DAT0DIR PIN_CFG(217, ALT_A) +#define GPIO217_MC3_DAT31DIR PIN_CFG(217, ALT_B) +#define GPIO217_CLKOUT2 PIN_CFG(217, ALT_C) + +#define GPIO218_GPIO PIN_CFG(218, GPIO) +#define GPIO218_MC1_DAT31DIR PIN_CFG(218, ALT_A) +#define GPIO218_MC3_DAT0DIR PIN_CFG(218, ALT_B) +#define GPIO218_I2C3_SCL PIN_CFG_PULL(218, ALT_C, UP) + +#define GPIO219_GPIO PIN_CFG(219, GPIO) +#define GPIO219_HSIR_FLA0 PIN_CFG(219, ALT_A) +#define GPIO219_MC3_CLK PIN_CFG(219, ALT_B) + +#define GPIO220_GPIO PIN_CFG(220, GPIO) +#define GPIO220_HSIR_DAT0 PIN_CFG(220, ALT_A) +#define GPIO220_MC3_FBCLK PIN_CFG(220, ALT_B) +#define GPIO220_SPI0_CLK PIN_CFG(220, ALT_C) + +#define GPIO221_GPIO PIN_CFG(221, GPIO) +#define GPIO221_HSIR_RDY0 PIN_CFG(221, ALT_A) +#define GPIO221_MC3_CMD PIN_CFG(221, ALT_B) + +#define GPIO222_GPIO PIN_CFG(222, GPIO) +#define GPIO222_HSIT_FLA0 PIN_CFG(222, ALT_A) +#define GPIO222_MC3_DAT0 PIN_CFG(222, ALT_B) + +#define GPIO223_GPIO PIN_CFG(223, GPIO) +#define GPIO223_HSIT_DAT0 PIN_CFG(223, ALT_A) +#define GPIO223_MC3_DAT1 PIN_CFG(223, ALT_B) +#define GPIO223_SPI0_FRM PIN_CFG(223, ALT_C) + +#define GPIO224_GPIO PIN_CFG(224, GPIO) +#define GPIO224_HSIT_RDY0 PIN_CFG(224, ALT_A) +#define GPIO224_MC3_DAT2 PIN_CFG(224, ALT_B) +#define GPIO224_SPI0_TXD PIN_CFG(224, ALT_C) + +#define GPIO225_GPIO PIN_CFG(225, GPIO) +#define GPIO225_HSIT_CAWAKE0 PIN_CFG(225, ALT_A) +#define GPIO225_MC3_DAT3 PIN_CFG(225, ALT_B) +#define GPIO225_SPI0_RXD PIN_CFG(225, ALT_C) + +#define GPIO226_GPIO PIN_CFG(226, GPIO) +#define GPIO226_HSIT_ACWAKE0 PIN_CFG(226, ALT_A) +#define GPIO226_PWL PIN_CFG(226, ALT_B) +#define GPIO226_USBSIM_PDC PIN_CFG(226, ALT_C) + +#define GPIO227_GPIO PIN_CFG(227, GPIO) +#define GPIO227_CLKOUT1 PIN_CFG(227, ALT_A) + +#define GPIO228_GPIO PIN_CFG(228, GPIO) +#define GPIO228_CLKOUT2 PIN_CFG(228, ALT_A) + +#define GPIO229_GPIO PIN_CFG(229, GPIO) +#define GPIO229_CLKOUT1 PIN_CFG(229, ALT_A) +#define GPIO229_PWL PIN_CFG(229, ALT_B) +#define GPIO229_I2C3_SDA PIN_CFG_PULL(229, ALT_C, UP) + +#define GPIO230_GPIO PIN_CFG(230, GPIO) +#define GPIO230_CLKOUT2 PIN_CFG(230, ALT_A) +#define GPIO230_PWL PIN_CFG(230, ALT_B) +#define GPIO230_I2C3_SCL PIN_CFG_PULL(230, ALT_C, UP) + +#define GPIO256_GPIO PIN_CFG(256, GPIO) +#define GPIO256_USB_NXT PIN_CFG(256, ALT_A) + +#define GPIO257_GPIO PIN_CFG(257, GPIO) +#define GPIO257_USB_STP PIN_CFG(257, ALT_A) + +#define GPIO258_GPIO PIN_CFG(258, GPIO) +#define GPIO258_USB_XCLK PIN_CFG(258, ALT_A) +#define GPIO258_NONE PIN_CFG(258, ALT_B) +#define GPIO258_DDR_TRIG PIN_CFG(258, ALT_C) + +#define GPIO259_GPIO PIN_CFG(259, GPIO) +#define GPIO259_USB_DIR PIN_CFG(259, ALT_A) + +#define GPIO260_GPIO PIN_CFG(260, GPIO) +#define GPIO260_USB_DAT7 PIN_CFG(260, ALT_A) + +#define GPIO261_GPIO PIN_CFG(261, GPIO) +#define GPIO261_USB_DAT6 PIN_CFG(261, ALT_A) + +#define GPIO262_GPIO PIN_CFG(262, GPIO) +#define GPIO262_USB_DAT5 PIN_CFG(262, ALT_A) + +#define GPIO263_GPIO PIN_CFG(263, GPIO) +#define GPIO263_USB_DAT4 PIN_CFG(263, ALT_A) + +#define GPIO264_GPIO PIN_CFG(264, GPIO) +#define GPIO264_USB_DAT3 PIN_CFG(264, ALT_A) + +#define GPIO265_GPIO PIN_CFG(265, GPIO) +#define GPIO265_USB_DAT2 PIN_CFG(265, ALT_A) + +#define GPIO266_GPIO PIN_CFG(266, GPIO) +#define GPIO266_USB_DAT1 PIN_CFG(266, ALT_A) + +#define GPIO267_GPIO PIN_CFG(267, GPIO) +#define GPIO267_USB_DAT0 PIN_CFG(267, ALT_A) + +#endif diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c index 3dff8641b03f..e38acb0f89c8 100644 --- a/arch/arm/mach-versatile/core.c +++ b/arch/arm/mach-versatile/core.c @@ -28,6 +28,7 @@ #include <linux/amba/clcd.h> #include <linux/amba/pl061.h> #include <linux/amba/mmci.h> +#include <linux/amba/pl022.h> #include <linux/io.h> #include <linux/gfp.h> @@ -354,6 +355,21 @@ static struct mmci_platform_data mmc0_plat_data = { .gpio_cd = -1, }; +static struct resource char_lcd_resources[] = { + { + .start = VERSATILE_CHAR_LCD_BASE, + .end = (VERSATILE_CHAR_LCD_BASE + SZ_4K - 1), + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device char_lcd_device = { + .name = "arm-charlcd", + .id = -1, + .num_resources = ARRAY_SIZE(char_lcd_resources), + .resource = char_lcd_resources, +}; + /* * Clock handling */ @@ -400,8 +416,13 @@ static struct clk ref24_clk = { .rate = 24000000, }; +static struct clk dummy_apb_pclk; + static struct clk_lookup lookups[] = { - { /* UART0 */ + { /* AMBA bus clock */ + .con_id = "apb_pclk", + .clk = &dummy_apb_pclk, + }, { /* UART0 */ .dev_id = "dev:f1", .clk = &ref24_clk, }, { /* UART1 */ @@ -425,6 +446,9 @@ static struct clk_lookup lookups[] = { }, { /* MMC1 */ .dev_id = "fpga:0b", .clk = &ref24_clk, + }, { /* SSP */ + .dev_id = "dev:f4", + .clk = &ref24_clk, }, { /* CLCD */ .dev_id = "dev:20", .clk = &osc4_clk, @@ -703,6 +727,12 @@ static struct pl061_platform_data gpio1_plat_data = { .irq_base = IRQ_GPIO1_START, }; +static struct pl022_ssp_controller ssp0_plat_data = { + .bus_id = 0, + .enable_dma = 0, + .num_chipselect = 1, +}; + #define AACI_IRQ { IRQ_AACI, NO_IRQ } #define AACI_DMA { 0x80, 0x81 } #define MMCI0_IRQ { IRQ_MMCI0A,IRQ_SIC_MMCI0B } @@ -772,7 +802,7 @@ AMBA_DEVICE(sci0, "dev:f0", SCI, NULL); AMBA_DEVICE(uart0, "dev:f1", UART0, NULL); AMBA_DEVICE(uart1, "dev:f2", UART1, NULL); AMBA_DEVICE(uart2, "dev:f3", UART2, NULL); -AMBA_DEVICE(ssp0, "dev:f4", SSP, NULL); +AMBA_DEVICE(ssp0, "dev:f4", SSP, &ssp0_plat_data); static struct amba_device *amba_devs[] __initdata = { &dmac_device, @@ -843,6 +873,7 @@ void __init versatile_init(void) platform_device_register(&versatile_flash_device); platform_device_register(&versatile_i2c_device); platform_device_register(&smc91x_device); + platform_device_register(&char_lcd_device); for (i = 0; i < ARRAY_SIZE(amba_devs); i++) { struct amba_device *d = amba_devs[i]; diff --git a/arch/arm/mach-versatile/pci.c b/arch/arm/mach-versatile/pci.c index 334f0df4e948..13c7e5f90a82 100644 --- a/arch/arm/mach-versatile/pci.c +++ b/arch/arm/mach-versatile/pci.c @@ -304,7 +304,7 @@ int __init pci_versatile_setup(int nr, struct pci_sys_data *sys) } -struct pci_bus *pci_versatile_scan_bus(int nr, struct pci_sys_data *sys) +struct pci_bus * __init pci_versatile_scan_bus(int nr, struct pci_sys_data *sys) { return pci_scan_bus(sys->busnr, &pci_versatile_ops, sys); } diff --git a/arch/arm/mach-vexpress/ct-ca9x4.c b/arch/arm/mach-vexpress/ct-ca9x4.c index 6353459bb567..577df6cccb08 100644 --- a/arch/arm/mach-vexpress/ct-ca9x4.c +++ b/arch/arm/mach-vexpress/ct-ca9x4.c @@ -16,6 +16,7 @@ #include <asm/hardware/gic.h> #include <asm/mach-types.h> #include <asm/pmu.h> +#include <asm/smp_twd.h> #include <mach/clkdev.h> #include <mach/ct-ca9x4.h> @@ -53,6 +54,7 @@ static struct map_desc ct_ca9x4_io_desc[] __initdata = { static void __init ct_ca9x4_map_io(void) { + twd_base = MMIO_P2V(A9_MPCORE_TWD); v2m_map_io(ct_ca9x4_io_desc, ARRAY_SIZE(ct_ca9x4_io_desc)); } diff --git a/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h b/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h index 8650f04136ef..f9e2f8d22962 100644 --- a/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h +++ b/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h @@ -28,6 +28,7 @@ #define A9_MPCORE_SCU (CT_CA9X4_MPIC + 0x0000) #define A9_MPCORE_GIC_CPU (CT_CA9X4_MPIC + 0x0100) #define A9_MPCORE_GIT (CT_CA9X4_MPIC + 0x0200) +#define A9_MPCORE_TWD (CT_CA9X4_MPIC + 0x0600) #define A9_MPCORE_GIC_DIST (CT_CA9X4_MPIC + 0x1000) /* diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c index d250711b8c7a..d6db3453908b 100644 --- a/arch/arm/mach-vexpress/v2m.c +++ b/arch/arm/mach-vexpress/v2m.c @@ -298,8 +298,13 @@ static struct clk osc2_clk = { .rate = 24000000, }; +static struct clk dummy_apb_pclk; + static struct clk_lookup v2m_lookups[] = { - { /* UART0 */ + { /* AMBA bus clock */ + .con_id = "apb_pclk", + .clk = &dummy_apb_pclk, + }, { /* UART0 */ .dev_id = "mb:uart0", .clk = &osc2_clk, }, { /* UART1 */ diff --git a/arch/arm/mach-w90x900/dev.c b/arch/arm/mach-w90x900/dev.c index b2eda4dc1c34..7a1fa6adb7c3 100644 --- a/arch/arm/mach-w90x900/dev.c +++ b/arch/arm/mach-w90x900/dev.c @@ -36,6 +36,8 @@ #include <mach/nuc900_spi.h> #include <mach/map.h> #include <mach/fb.h> +#include <mach/regs-ldm.h> +#include <mach/w90p910_keypad.h> #include "cpu.h" @@ -207,7 +209,7 @@ static struct nuc900_spi_info nuc900_spiflash_data = { .divider = 24, .sleep = 0, .txnum = 0, - .txbitlen = 1, + .txbitlen = 8, .bus_num = 0, }; @@ -256,7 +258,7 @@ static struct spi_board_info nuc900_spi_board_info[] __initdata = { .modalias = "m25p80", .max_speed_hz = 20000000, .bus_num = 0, - .chip_select = 1, + .chip_select = 0, .platform_data = &nuc900_spi_flash_data, .mode = SPI_MODE_0, }, @@ -361,6 +363,39 @@ struct platform_device nuc900_device_fmi = { /* KPI controller*/ +static int nuc900_keymap[] = { + KEY(0, 0, KEY_A), + KEY(0, 1, KEY_B), + KEY(0, 2, KEY_C), + KEY(0, 3, KEY_D), + + KEY(1, 0, KEY_E), + KEY(1, 1, KEY_F), + KEY(1, 2, KEY_G), + KEY(1, 3, KEY_H), + + KEY(2, 0, KEY_I), + KEY(2, 1, KEY_J), + KEY(2, 2, KEY_K), + KEY(2, 3, KEY_L), + + KEY(3, 0, KEY_M), + KEY(3, 1, KEY_N), + KEY(3, 2, KEY_O), + KEY(3, 3, KEY_P), +}; + +static struct matrix_keymap_data nuc900_map_data = { + .keymap = nuc900_keymap, + .keymap_size = ARRAY_SIZE(nuc900_keymap), +}; + +struct w90p910_keypad_platform_data nuc900_keypad_info = { + .keymap_data = &nuc900_map_data, + .prescale = 0xfa, + .debounce = 0x50, +}; + static struct resource nuc900_kpi_resource[] = { [0] = { .start = W90X900_PA_KPI, @@ -380,9 +415,49 @@ struct platform_device nuc900_device_kpi = { .id = -1, .num_resources = ARRAY_SIZE(nuc900_kpi_resource), .resource = nuc900_kpi_resource, + .dev = { + .platform_data = &nuc900_keypad_info, + } }; -#ifdef CONFIG_FB_NUC900 +/* LCD controller*/ + +static struct nuc900fb_display __initdata nuc900_lcd_info[] = { + /* Giantplus Technology GPM1040A0 320x240 Color TFT LCD */ + [0] = { + .type = LCM_DCCS_VA_SRC_RGB565, + .width = 320, + .height = 240, + .xres = 320, + .yres = 240, + .bpp = 16, + .pixclock = 200000, + .left_margin = 34, + .right_margin = 54, + .hsync_len = 10, + .upper_margin = 18, + .lower_margin = 4, + .vsync_len = 1, + .dccs = 0x8e00041a, + .devctl = 0x060800c0, + .fbctrl = 0x00a000a0, + .scale = 0x04000400, + }, +}; + +static struct nuc900fb_mach_info nuc900_fb_info __initdata = { +#if defined(CONFIG_GPM1040A0_320X240) + .displays = &nuc900_lcd_info[0], +#else + .displays = nuc900_lcd_info, +#endif + .num_displays = ARRAY_SIZE(nuc900_lcd_info), + .default_display = 0, + .gpio_dir = 0x00000004, + .gpio_dir_mask = 0xFFFFFFFD, + .gpio_data = 0x00000004, + .gpio_data_mask = 0xFFFFFFFD, +}; static struct resource nuc900_lcd_resource[] = { [0] = { @@ -406,23 +481,10 @@ struct platform_device nuc900_device_lcd = { .dev = { .dma_mask = &nuc900_device_lcd_dmamask, .coherent_dma_mask = -1, + .platform_data = &nuc900_fb_info, } }; -void nuc900_fb_set_platdata(struct nuc900fb_mach_info *pd) -{ - struct nuc900fb_mach_info *npd; - - npd = kmalloc(sizeof(*npd), GFP_KERNEL); - if (npd) { - memcpy(npd, pd, sizeof(*npd)); - nuc900_device_lcd.dev.platform_data = npd; - } else { - printk(KERN_ERR "no memory for LCD platform data\n"); - } -} -#endif - /* AUDIO controller*/ static u64 nuc900_device_audio_dmamask = -1; static struct resource nuc900_ac97_resource[] = { diff --git a/arch/arm/mach-w90x900/include/mach/regs-gcr.h b/arch/arm/mach-w90x900/include/mach/regs-gcr.h new file mode 100644 index 000000000000..6087abd93ef5 --- /dev/null +++ b/arch/arm/mach-w90x900/include/mach/regs-gcr.h @@ -0,0 +1,39 @@ +/* + * arch/arm/mach-w90x900/include/mach/regs-gcr.h + * + * Copyright (c) 2010 Nuvoton technology corporation + * All rights reserved. + * + * Wan ZongShun <mcuos.com@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +#ifndef __ASM_ARCH_REGS_GCR_H +#define __ASM_ARCH_REGS_GCR_H + +/* Global control registers */ + +#define GCR_BA W90X900_VA_GCR +#define REG_PDID (GCR_BA+0x000) +#define REG_PWRON (GCR_BA+0x004) +#define REG_ARBCON (GCR_BA+0x008) +#define REG_MFSEL (GCR_BA+0x00C) +#define REG_EBIDPE (GCR_BA+0x010) +#define REG_LCDDPE (GCR_BA+0x014) +#define REG_GPIOCPE (GCR_BA+0x018) +#define REG_GPIODPE (GCR_BA+0x01C) +#define REG_GPIOEPE (GCR_BA+0x020) +#define REG_GPIOFPE (GCR_BA+0x024) +#define REG_GPIOGPE (GCR_BA+0x028) +#define REG_GPIOHPE (GCR_BA+0x02C) +#define REG_GPIOIPE (GCR_BA+0x030) +#define REG_GTMP1 (GCR_BA+0x034) +#define REG_GTMP2 (GCR_BA+0x038) +#define REG_GTMP3 (GCR_BA+0x03C) + +#endif /* __ASM_ARCH_REGS_GCR_H */ diff --git a/arch/arm/mach-w90x900/mach-nuc950evb.c b/arch/arm/mach-w90x900/mach-nuc950evb.c index b3edc3cccf52..04d295f89eb0 100644 --- a/arch/arm/mach-w90x900/mach-nuc950evb.c +++ b/arch/arm/mach-w90x900/mach-nuc950evb.c @@ -20,51 +20,10 @@ #include <asm/mach/map.h> #include <asm/mach-types.h> #include <mach/map.h> -#include <mach/regs-ldm.h> #include <mach/fb.h> #include "nuc950.h" -#ifdef CONFIG_FB_NUC900 -/* LCD Controller */ -static struct nuc900fb_display __initdata nuc950_lcd_info[] = { - /* Giantplus Technology GPM1040A0 320x240 Color TFT LCD */ - [0] = { - .type = LCM_DCCS_VA_SRC_RGB565, - .width = 320, - .height = 240, - .xres = 320, - .yres = 240, - .bpp = 16, - .pixclock = 200000, - .left_margin = 34, - .right_margin = 54, - .hsync_len = 10, - .upper_margin = 18, - .lower_margin = 4, - .vsync_len = 1, - .dccs = 0x8e00041a, - .devctl = 0x060800c0, - .fbctrl = 0x00a000a0, - .scale = 0x04000400, - }, -}; - -static struct nuc900fb_mach_info nuc950_fb_info __initdata = { -#if defined(CONFIG_GPM1040A0_320X240) - .displays = &nuc950_lcd_info[0], -#else - .displays = nuc950_lcd_info, -#endif - .num_displays = ARRAY_SIZE(nuc950_lcd_info), - .default_display = 0, - .gpio_dir = 0x00000004, - .gpio_dir_mask = 0xFFFFFFFD, - .gpio_data = 0x00000004, - .gpio_data_mask = 0xFFFFFFFD, -}; -#endif - static void __init nuc950evb_map_io(void) { nuc950_map_io(); @@ -74,9 +33,6 @@ static void __init nuc950evb_map_io(void) static void __init nuc950evb_init(void) { nuc950_board_init(); -#ifdef CONFIG_FB_NUC900 - nuc900_fb_set_platdata(&nuc950_fb_info); -#endif } MACHINE_START(W90P950EVB, "W90P950EVB") diff --git a/arch/arm/mach-w90x900/nuc910.c b/arch/arm/mach-w90x900/nuc910.c index 656f03b3b629..1523f4136985 100644 --- a/arch/arm/mach-w90x900/nuc910.c +++ b/arch/arm/mach-w90x900/nuc910.c @@ -26,6 +26,8 @@ static struct platform_device *nuc910_dev[] __initdata = { &nuc900_device_ts, &nuc900_device_rtc, + &nuc900_device_lcd, + &nuc900_device_kpi, }; /* define specific CPU platform io map */ diff --git a/arch/arm/mach-w90x900/nuc950.c b/arch/arm/mach-w90x900/nuc950.c index 4d1f1ab044c4..5704f74a50ee 100644 --- a/arch/arm/mach-w90x900/nuc950.c +++ b/arch/arm/mach-w90x900/nuc950.c @@ -26,9 +26,7 @@ static struct platform_device *nuc950_dev[] __initdata = { &nuc900_device_kpi, &nuc900_device_fmi, -#ifdef CONFIG_FB_NUC900 &nuc900_device_lcd, -#endif }; /* define specific CPU platform io map */ diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 101105e52610..87ec141fcaa6 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -717,17 +717,6 @@ config TLS_REG_EMUL a few prototypes like that in existence) and therefore access to that required register must be emulated. -config HAS_TLS_REG - bool - depends on !TLS_REG_EMUL - default y if SMP || CPU_32v7 - help - This selects support for the CP15 thread register. - It is defined to be available on some ARMv6 processors (including - all SMP capable ARMv6's) or later processors. User space may - assume directly accessing that register and always obtain the - expected value only on ARMv7 and above. - config NEEDS_SYSCALL_FOR_CMPXCHG bool help diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile index e8d34a80851c..d63b6c413758 100644 --- a/arch/arm/mm/Makefile +++ b/arch/arm/mm/Makefile @@ -15,7 +15,6 @@ endif obj-$(CONFIG_MODULES) += proc-syms.o obj-$(CONFIG_ALIGNMENT_TRAP) += alignment.o -obj-$(CONFIG_DISCONTIGMEM) += discontig.o obj-$(CONFIG_HIGHMEM) += highmem.o obj-$(CONFIG_CPU_ABRT_NOMMU) += abort-nommu.o diff --git a/arch/arm/mm/discontig.c b/arch/arm/mm/discontig.c deleted file mode 100644 index c8c0c4b0f0a3..000000000000 --- a/arch/arm/mm/discontig.c +++ /dev/null @@ -1,45 +0,0 @@ -/* - * linux/arch/arm/mm/discontig.c - * - * Discontiguous memory support. - * - * Initial code: Copyright (C) 1999-2000 Nicolas Pitre - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/module.h> -#include <linux/mmzone.h> -#include <linux/bootmem.h> - -#if MAX_NUMNODES != 4 && MAX_NUMNODES != 16 -# error Fix Me Please -#endif - -/* - * Our node_data structure for discontiguous memory. - */ - -pg_data_t discontig_node_data[MAX_NUMNODES] = { - { .bdata = &bootmem_node_data[0] }, - { .bdata = &bootmem_node_data[1] }, - { .bdata = &bootmem_node_data[2] }, - { .bdata = &bootmem_node_data[3] }, -#if MAX_NUMNODES == 16 - { .bdata = &bootmem_node_data[4] }, - { .bdata = &bootmem_node_data[5] }, - { .bdata = &bootmem_node_data[6] }, - { .bdata = &bootmem_node_data[7] }, - { .bdata = &bootmem_node_data[8] }, - { .bdata = &bootmem_node_data[9] }, - { .bdata = &bootmem_node_data[10] }, - { .bdata = &bootmem_node_data[11] }, - { .bdata = &bootmem_node_data[12] }, - { .bdata = &bootmem_node_data[13] }, - { .bdata = &bootmem_node_data[14] }, - { .bdata = &bootmem_node_data[15] }, -#endif -}; - -EXPORT_SYMBOL(discontig_node_data); diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index f6a999465323..599d121c81e7 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -17,6 +17,7 @@ #include <linux/initrd.h> #include <linux/highmem.h> #include <linux/gfp.h> +#include <linux/memblock.h> #include <asm/mach-types.h> #include <asm/sections.h> @@ -79,38 +80,37 @@ struct meminfo meminfo; void show_mem(void) { int free = 0, total = 0, reserved = 0; - int shared = 0, cached = 0, slab = 0, node, i; + int shared = 0, cached = 0, slab = 0, i; struct meminfo * mi = &meminfo; printk("Mem-info:\n"); show_free_areas(); - for_each_online_node(node) { - for_each_nodebank (i,mi,node) { - struct membank *bank = &mi->bank[i]; - unsigned int pfn1, pfn2; - struct page *page, *end; - - pfn1 = bank_pfn_start(bank); - pfn2 = bank_pfn_end(bank); - - page = pfn_to_page(pfn1); - end = pfn_to_page(pfn2 - 1) + 1; - - do { - total++; - if (PageReserved(page)) - reserved++; - else if (PageSwapCache(page)) - cached++; - else if (PageSlab(page)) - slab++; - else if (!page_count(page)) - free++; - else - shared += page_count(page) - 1; - page++; - } while (page < end); - } + + for_each_bank (i, mi) { + struct membank *bank = &mi->bank[i]; + unsigned int pfn1, pfn2; + struct page *page, *end; + + pfn1 = bank_pfn_start(bank); + pfn2 = bank_pfn_end(bank); + + page = pfn_to_page(pfn1); + end = pfn_to_page(pfn2 - 1) + 1; + + do { + total++; + if (PageReserved(page)) + reserved++; + else if (PageSwapCache(page)) + cached++; + else if (PageSlab(page)) + slab++; + else if (!page_count(page)) + free++; + else + shared += page_count(page) - 1; + page++; + } while (page < end); } printk("%d pages of RAM\n", total); @@ -121,7 +121,7 @@ void show_mem(void) printk("%d pages swap cached\n", cached); } -static void __init find_node_limits(int node, struct meminfo *mi, +static void __init find_limits(struct meminfo *mi, unsigned long *min, unsigned long *max_low, unsigned long *max_high) { int i; @@ -129,7 +129,7 @@ static void __init find_node_limits(int node, struct meminfo *mi, *min = -1UL; *max_low = *max_high = 0; - for_each_nodebank(i, mi, node) { + for_each_bank (i, mi) { struct membank *bank = &mi->bank[i]; unsigned long start, end; @@ -147,155 +147,64 @@ static void __init find_node_limits(int node, struct meminfo *mi, } } -/* - * FIXME: We really want to avoid allocating the bootmap bitmap - * over the top of the initrd. Hopefully, this is located towards - * the start of a bank, so if we allocate the bootmap bitmap at - * the end, we won't clash. - */ -static unsigned int __init -find_bootmap_pfn(int node, struct meminfo *mi, unsigned int bootmap_pages) -{ - unsigned int start_pfn, i, bootmap_pfn; - - start_pfn = PAGE_ALIGN(__pa(_end)) >> PAGE_SHIFT; - bootmap_pfn = 0; - - for_each_nodebank(i, mi, node) { - struct membank *bank = &mi->bank[i]; - unsigned int start, end; - - start = bank_pfn_start(bank); - end = bank_pfn_end(bank); - - if (end < start_pfn) - continue; - - if (start < start_pfn) - start = start_pfn; - - if (end <= start) - continue; - - if (end - start >= bootmap_pages) { - bootmap_pfn = start; - break; - } - } - - if (bootmap_pfn == 0) - BUG(); - - return bootmap_pfn; -} - -static int __init check_initrd(struct meminfo *mi) -{ - int initrd_node = -2; -#ifdef CONFIG_BLK_DEV_INITRD - unsigned long end = phys_initrd_start + phys_initrd_size; - - /* - * Make sure that the initrd is within a valid area of - * memory. - */ - if (phys_initrd_size) { - unsigned int i; - - initrd_node = -1; - - for (i = 0; i < mi->nr_banks; i++) { - struct membank *bank = &mi->bank[i]; - if (bank_phys_start(bank) <= phys_initrd_start && - end <= bank_phys_end(bank)) - initrd_node = bank->node; - } - } - - if (initrd_node == -1) { - printk(KERN_ERR "INITRD: 0x%08lx+0x%08lx extends beyond " - "physical memory - disabling initrd\n", - phys_initrd_start, phys_initrd_size); - phys_initrd_start = phys_initrd_size = 0; - } -#endif - - return initrd_node; -} - -static void __init bootmem_init_node(int node, struct meminfo *mi, +static void __init arm_bootmem_init(struct meminfo *mi, unsigned long start_pfn, unsigned long end_pfn) { - unsigned long boot_pfn; unsigned int boot_pages; + phys_addr_t bitmap; pg_data_t *pgdat; int i; /* - * Allocate the bootmem bitmap page. + * Allocate the bootmem bitmap page. This must be in a region + * of memory which has already been mapped. */ boot_pages = bootmem_bootmap_pages(end_pfn - start_pfn); - boot_pfn = find_bootmap_pfn(node, mi, boot_pages); + bitmap = memblock_alloc_base(boot_pages << PAGE_SHIFT, L1_CACHE_BYTES, + __pfn_to_phys(end_pfn)); /* - * Initialise the bootmem allocator for this node, handing the + * Initialise the bootmem allocator, handing the * memory banks over to bootmem. */ - node_set_online(node); - pgdat = NODE_DATA(node); - init_bootmem_node(pgdat, boot_pfn, start_pfn, end_pfn); + node_set_online(0); + pgdat = NODE_DATA(0); + init_bootmem_node(pgdat, __phys_to_pfn(bitmap), start_pfn, end_pfn); - for_each_nodebank(i, mi, node) { + for_each_bank(i, mi) { struct membank *bank = &mi->bank[i]; if (!bank->highmem) - free_bootmem_node(pgdat, bank_phys_start(bank), bank_phys_size(bank)); + free_bootmem(bank_phys_start(bank), bank_phys_size(bank)); } /* - * Reserve the bootmem bitmap for this node. + * Reserve the memblock reserved regions in bootmem. */ - reserve_bootmem_node(pgdat, boot_pfn << PAGE_SHIFT, - boot_pages << PAGE_SHIFT, BOOTMEM_DEFAULT); -} - -static void __init bootmem_reserve_initrd(int node) -{ -#ifdef CONFIG_BLK_DEV_INITRD - pg_data_t *pgdat = NODE_DATA(node); - int res; - - res = reserve_bootmem_node(pgdat, phys_initrd_start, - phys_initrd_size, BOOTMEM_EXCLUSIVE); - - if (res == 0) { - initrd_start = __phys_to_virt(phys_initrd_start); - initrd_end = initrd_start + phys_initrd_size; - } else { - printk(KERN_ERR - "INITRD: 0x%08lx+0x%08lx overlaps in-use " - "memory region - disabling initrd\n", - phys_initrd_start, phys_initrd_size); + for (i = 0; i < memblock.reserved.cnt; i++) { + phys_addr_t start = memblock_start_pfn(&memblock.reserved, i); + if (start >= start_pfn && + memblock_end_pfn(&memblock.reserved, i) <= end_pfn) + reserve_bootmem_node(pgdat, __pfn_to_phys(start), + memblock_size_bytes(&memblock.reserved, i), + BOOTMEM_DEFAULT); } -#endif } -static void __init bootmem_free_node(int node, struct meminfo *mi) +static void __init arm_bootmem_free(struct meminfo *mi, unsigned long min, + unsigned long max_low, unsigned long max_high) { unsigned long zone_size[MAX_NR_ZONES], zhole_size[MAX_NR_ZONES]; - unsigned long min, max_low, max_high; int i; - find_node_limits(node, mi, &min, &max_low, &max_high); - /* - * initialise the zones within this node. + * initialise the zones. */ memset(zone_size, 0, sizeof(zone_size)); /* - * The size of this node has already been determined. If we need - * to do anything fancy with the allocation of this memory to the - * zones, now is the time to do it. + * The memory size has already been determined. If we need + * to do anything fancy with the allocation of this memory + * to the zones, now is the time to do it. */ zone_size[0] = max_low - min; #ifdef CONFIG_HIGHMEM @@ -303,11 +212,11 @@ static void __init bootmem_free_node(int node, struct meminfo *mi) #endif /* - * For each bank in this node, calculate the size of the holes. - * holes = node_size - sum(bank_sizes_in_node) + * Calculate the size of the holes. + * holes = node_size - sum(bank_sizes) */ memcpy(zhole_size, zone_size, sizeof(zhole_size)); - for_each_nodebank(i, mi, node) { + for_each_bank(i, mi) { int idx = 0; #ifdef CONFIG_HIGHMEM if (mi->bank[i].highmem) @@ -320,24 +229,23 @@ static void __init bootmem_free_node(int node, struct meminfo *mi) * Adjust the sizes according to any special requirements for * this machine type. */ - arch_adjust_zones(node, zone_size, zhole_size); + arch_adjust_zones(zone_size, zhole_size); - free_area_init_node(node, zone_size, min, zhole_size); + free_area_init_node(0, zone_size, min, zhole_size); } #ifndef CONFIG_SPARSEMEM int pfn_valid(unsigned long pfn) { - struct meminfo *mi = &meminfo; - unsigned int left = 0, right = mi->nr_banks; + struct memblock_region *mem = &memblock.memory; + unsigned int left = 0, right = mem->cnt; do { unsigned int mid = (right + left) / 2; - struct membank *bank = &mi->bank[mid]; - if (pfn < bank_pfn_start(bank)) + if (pfn < memblock_start_pfn(mem, mid)) right = mid; - else if (pfn >= bank_pfn_end(bank)) + else if (pfn >= memblock_end_pfn(mem, mid)) left = mid + 1; else return 1; @@ -346,73 +254,69 @@ int pfn_valid(unsigned long pfn) } EXPORT_SYMBOL(pfn_valid); -static void arm_memory_present(struct meminfo *mi, int node) +static void arm_memory_present(void) { } #else -static void arm_memory_present(struct meminfo *mi, int node) +static void arm_memory_present(void) { int i; - for_each_nodebank(i, mi, node) { - struct membank *bank = &mi->bank[i]; - memory_present(node, bank_pfn_start(bank), bank_pfn_end(bank)); - } + for (i = 0; i < memblock.memory.cnt; i++) + memory_present(0, memblock_start_pfn(&memblock.memory, i), + memblock_end_pfn(&memblock.memory, i)); } #endif -void __init bootmem_init(void) +void __init arm_memblock_init(struct meminfo *mi, struct machine_desc *mdesc) { - struct meminfo *mi = &meminfo; - unsigned long min, max_low, max_high; - int node, initrd_node; + int i; - /* - * Locate which node contains the ramdisk image, if any. - */ - initrd_node = check_initrd(mi); + memblock_init(); + for (i = 0; i < mi->nr_banks; i++) + memblock_add(mi->bank[i].start, mi->bank[i].size); - max_low = max_high = 0; + /* Register the kernel text, kernel data and initrd with memblock. */ +#ifdef CONFIG_XIP_KERNEL + memblock_reserve(__pa(_data), _end - _data); +#else + memblock_reserve(__pa(_stext), _end - _stext); +#endif +#ifdef CONFIG_BLK_DEV_INITRD + if (phys_initrd_size) { + memblock_reserve(phys_initrd_start, phys_initrd_size); - /* - * Run through each node initialising the bootmem allocator. - */ - for_each_node(node) { - unsigned long node_low, node_high; + /* Now convert initrd to virtual addresses */ + initrd_start = __phys_to_virt(phys_initrd_start); + initrd_end = initrd_start + phys_initrd_size; + } +#endif - find_node_limits(node, mi, &min, &node_low, &node_high); + arm_mm_memblock_reserve(); - if (node_low > max_low) - max_low = node_low; - if (node_high > max_high) - max_high = node_high; + /* reserve any platform specific memblock areas */ + if (mdesc->reserve) + mdesc->reserve(); - /* - * If there is no memory in this node, ignore it. - * (We can't have nodes which have no lowmem) - */ - if (node_low == 0) - continue; + memblock_analyze(); + memblock_dump_all(); +} - bootmem_init_node(node, mi, min, node_low); +void __init bootmem_init(void) +{ + struct meminfo *mi = &meminfo; + unsigned long min, max_low, max_high; - /* - * Reserve any special node zero regions. - */ - if (node == 0) - reserve_node_zero(NODE_DATA(node)); + max_low = max_high = 0; - /* - * If the initrd is in this node, reserve its memory. - */ - if (node == initrd_node) - bootmem_reserve_initrd(node); + find_limits(mi, &min, &max_low, &max_high); - /* - * Sparsemem tries to allocate bootmem in memory_present(), - * so must be done after the fixed reservations - */ - arm_memory_present(mi, node); - } + arm_bootmem_init(mi, min, max_low); + + /* + * Sparsemem tries to allocate bootmem in memory_present(), + * so must be done after the fixed reservations + */ + arm_memory_present(); /* * sparse_init() needs the bootmem allocator up and running. @@ -420,12 +324,11 @@ void __init bootmem_init(void) sparse_init(); /* - * Now free memory in each node - free_area_init_node needs + * Now free the memory - free_area_init_node needs * the sparse mem_map arrays initialized by sparse_init() * for memmap_init_zone(), otherwise all PFNs are invalid. */ - for_each_node(node) - bootmem_free_node(node, mi); + arm_bootmem_free(mi, min, max_low, max_high); high_memory = __va((max_low << PAGE_SHIFT) - 1) + 1; @@ -460,7 +363,7 @@ static inline int free_area(unsigned long pfn, unsigned long end, char *s) } static inline void -free_memmap(int node, unsigned long start_pfn, unsigned long end_pfn) +free_memmap(unsigned long start_pfn, unsigned long end_pfn) { struct page *start_pg, *end_pg; unsigned long pg, pgend; @@ -483,13 +386,13 @@ free_memmap(int node, unsigned long start_pfn, unsigned long end_pfn) * free the section of the memmap array. */ if (pg < pgend) - free_bootmem_node(NODE_DATA(node), pg, pgend - pg); + free_bootmem(pg, pgend - pg); } /* * The mem_map array can get very big. Free the unused area of the memory map. */ -static void __init free_unused_memmap_node(int node, struct meminfo *mi) +static void __init free_unused_memmap(struct meminfo *mi) { unsigned long bank_start, prev_bank_end = 0; unsigned int i; @@ -499,7 +402,7 @@ static void __init free_unused_memmap_node(int node, struct meminfo *mi) * may not be the case, especially if the user has provided the * information on the command line. */ - for_each_nodebank(i, mi, node) { + for_each_bank(i, mi) { struct membank *bank = &mi->bank[i]; bank_start = bank_pfn_start(bank); @@ -514,7 +417,7 @@ static void __init free_unused_memmap_node(int node, struct meminfo *mi) * between the current bank and the previous, free it. */ if (prev_bank_end && prev_bank_end != bank_start) - free_memmap(node, prev_bank_end, bank_start); + free_memmap(prev_bank_end, bank_start); prev_bank_end = bank_pfn_end(bank); } @@ -528,21 +431,14 @@ static void __init free_unused_memmap_node(int node, struct meminfo *mi) void __init mem_init(void) { unsigned long reserved_pages, free_pages; - int i, node; + int i; -#ifndef CONFIG_DISCONTIGMEM max_mapnr = pfn_to_page(max_pfn + PHYS_PFN_OFFSET) - mem_map; -#endif /* this will put all unused low memory onto the freelists */ - for_each_online_node(node) { - pg_data_t *pgdat = NODE_DATA(node); - - free_unused_memmap_node(node, &meminfo); + free_unused_memmap(&meminfo); - if (pgdat->node_spanned_pages != 0) - totalram_pages += free_all_bootmem_node(pgdat); - } + totalram_pages += free_all_bootmem(); #ifdef CONFIG_SA1111 /* now that our DMA memory is actually so designated, we can free it */ @@ -552,39 +448,35 @@ void __init mem_init(void) #ifdef CONFIG_HIGHMEM /* set highmem page free */ - for_each_online_node(node) { - for_each_nodebank (i, &meminfo, node) { - unsigned long start = bank_pfn_start(&meminfo.bank[i]); - unsigned long end = bank_pfn_end(&meminfo.bank[i]); - if (start >= max_low_pfn + PHYS_PFN_OFFSET) - totalhigh_pages += free_area(start, end, NULL); - } + for_each_bank (i, &meminfo) { + unsigned long start = bank_pfn_start(&meminfo.bank[i]); + unsigned long end = bank_pfn_end(&meminfo.bank[i]); + if (start >= max_low_pfn + PHYS_PFN_OFFSET) + totalhigh_pages += free_area(start, end, NULL); } totalram_pages += totalhigh_pages; #endif reserved_pages = free_pages = 0; - for_each_online_node(node) { - for_each_nodebank(i, &meminfo, node) { - struct membank *bank = &meminfo.bank[i]; - unsigned int pfn1, pfn2; - struct page *page, *end; - - pfn1 = bank_pfn_start(bank); - pfn2 = bank_pfn_end(bank); - - page = pfn_to_page(pfn1); - end = pfn_to_page(pfn2 - 1) + 1; - - do { - if (PageReserved(page)) - reserved_pages++; - else if (!page_count(page)) - free_pages++; - page++; - } while (page < end); - } + for_each_bank(i, &meminfo) { + struct membank *bank = &meminfo.bank[i]; + unsigned int pfn1, pfn2; + struct page *page, *end; + + pfn1 = bank_pfn_start(bank); + pfn2 = bank_pfn_end(bank); + + page = pfn_to_page(pfn1); + end = pfn_to_page(pfn2 - 1) + 1; + + do { + if (PageReserved(page)) + reserved_pages++; + else if (!page_count(page)) + free_pages++; + page++; + } while (page < end); } /* diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c index 28c8b950ef04..03f11935ed08 100644 --- a/arch/arm/mm/ioremap.c +++ b/arch/arm/mm/ioremap.c @@ -268,6 +268,12 @@ void __iomem * __arm_ioremap_pfn_caller(unsigned long pfn, if (pfn >= 0x100000 && (__pfn_to_phys(pfn) & ~SUPERSECTION_MASK)) return NULL; + /* + * Don't allow RAM to be mapped - this causes problems with ARMv6+ + */ + if (WARN_ON(pfn_valid(pfn))) + return NULL; + type = get_mem_type(mtype); if (!type) return NULL; diff --git a/arch/arm/mm/mm.h b/arch/arm/mm/mm.h index 815d08eecbb0..6630620380a4 100644 --- a/arch/arm/mm/mm.h +++ b/arch/arm/mm/mm.h @@ -28,7 +28,5 @@ extern void __flush_dcache_page(struct address_space *mapping, struct page *page #endif -struct pglist_data; - void __init bootmem_init(void); -void reserve_node_zero(struct pglist_data *pgdat); +void arm_mm_memblock_reserve(void); diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 285894171186..d5541adc3520 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -11,13 +11,12 @@ #include <linux/kernel.h> #include <linux/errno.h> #include <linux/init.h> -#include <linux/bootmem.h> #include <linux/mman.h> #include <linux/nodemask.h> +#include <linux/memblock.h> #include <linux/sort.h> #include <asm/cputype.h> -#include <asm/mach-types.h> #include <asm/sections.h> #include <asm/cachetype.h> #include <asm/setup.h> @@ -488,18 +487,28 @@ static void __init build_mem_type_table(void) #define vectors_base() (vectors_high() ? 0xffff0000 : 0) -static void __init alloc_init_pte(pmd_t *pmd, unsigned long addr, - unsigned long end, unsigned long pfn, - const struct mem_type *type) +static void __init *early_alloc(unsigned long sz) { - pte_t *pte; + void *ptr = __va(memblock_alloc(sz, sz)); + memset(ptr, 0, sz); + return ptr; +} +static pte_t * __init early_pte_alloc(pmd_t *pmd, unsigned long addr, unsigned long prot) +{ if (pmd_none(*pmd)) { - pte = alloc_bootmem_low_pages(2 * PTRS_PER_PTE * sizeof(pte_t)); - __pmd_populate(pmd, __pa(pte) | type->prot_l1); + pte_t *pte = early_alloc(2 * PTRS_PER_PTE * sizeof(pte_t)); + __pmd_populate(pmd, __pa(pte) | prot); } + BUG_ON(pmd_bad(*pmd)); + return pte_offset_kernel(pmd, addr); +} - pte = pte_offset_kernel(pmd, addr); +static void __init alloc_init_pte(pmd_t *pmd, unsigned long addr, + unsigned long end, unsigned long pfn, + const struct mem_type *type) +{ + pte_t *pte = early_pte_alloc(pmd, addr, type->prot_l1); do { set_pte_ext(pte, pfn_pte(pfn, __pgprot(type->prot_pte)), 0); pfn++; @@ -668,7 +677,7 @@ void __init iotable_init(struct map_desc *io_desc, int nr) create_mapping(io_desc + i); } -static unsigned long __initdata vmalloc_reserve = SZ_128M; +static void * __initdata vmalloc_min = (void *)(VMALLOC_END - SZ_128M); /* * vmalloc=size forces the vmalloc area to be exactly 'size' @@ -677,7 +686,7 @@ static unsigned long __initdata vmalloc_reserve = SZ_128M; */ static int __init early_vmalloc(char *arg) { - vmalloc_reserve = memparse(arg, NULL); + unsigned long vmalloc_reserve = memparse(arg, NULL); if (vmalloc_reserve < SZ_16M) { vmalloc_reserve = SZ_16M; @@ -692,22 +701,26 @@ static int __init early_vmalloc(char *arg) "vmalloc area is too big, limiting to %luMB\n", vmalloc_reserve >> 20); } + + vmalloc_min = (void *)(VMALLOC_END - vmalloc_reserve); return 0; } early_param("vmalloc", early_vmalloc); -#define VMALLOC_MIN (void *)(VMALLOC_END - vmalloc_reserve) +phys_addr_t lowmem_end_addr; static void __init sanity_check_meminfo(void) { int i, j, highmem = 0; + lowmem_end_addr = __pa(vmalloc_min - 1) + 1; + for (i = 0, j = 0; i < meminfo.nr_banks; i++) { struct membank *bank = &meminfo.bank[j]; *bank = meminfo.bank[i]; #ifdef CONFIG_HIGHMEM - if (__va(bank->start) > VMALLOC_MIN || + if (__va(bank->start) > vmalloc_min || __va(bank->start) < (void *)PAGE_OFFSET) highmem = 1; @@ -717,8 +730,8 @@ static void __init sanity_check_meminfo(void) * Split those memory banks which are partially overlapping * the vmalloc area greatly simplifying things later. */ - if (__va(bank->start) < VMALLOC_MIN && - bank->size > VMALLOC_MIN - __va(bank->start)) { + if (__va(bank->start) < vmalloc_min && + bank->size > vmalloc_min - __va(bank->start)) { if (meminfo.nr_banks >= NR_BANKS) { printk(KERN_CRIT "NR_BANKS too low, " "ignoring high memory\n"); @@ -727,12 +740,12 @@ static void __init sanity_check_meminfo(void) (meminfo.nr_banks - i) * sizeof(*bank)); meminfo.nr_banks++; i++; - bank[1].size -= VMALLOC_MIN - __va(bank->start); - bank[1].start = __pa(VMALLOC_MIN - 1) + 1; + bank[1].size -= vmalloc_min - __va(bank->start); + bank[1].start = __pa(vmalloc_min - 1) + 1; bank[1].highmem = highmem = 1; j++; } - bank->size = VMALLOC_MIN - __va(bank->start); + bank->size = vmalloc_min - __va(bank->start); } #else bank->highmem = highmem; @@ -741,7 +754,7 @@ static void __init sanity_check_meminfo(void) * Check whether this memory bank would entirely overlap * the vmalloc area. */ - if (__va(bank->start) >= VMALLOC_MIN || + if (__va(bank->start) >= vmalloc_min || __va(bank->start) < (void *)PAGE_OFFSET) { printk(KERN_NOTICE "Ignoring RAM at %.8lx-%.8lx " "(vmalloc region overlap).\n", @@ -753,9 +766,9 @@ static void __init sanity_check_meminfo(void) * Check whether this memory bank would partially overlap * the vmalloc area. */ - if (__va(bank->start + bank->size) > VMALLOC_MIN || + if (__va(bank->start + bank->size) > vmalloc_min || __va(bank->start + bank->size) < __va(bank->start)) { - unsigned long newsize = VMALLOC_MIN - __va(bank->start); + unsigned long newsize = vmalloc_min - __va(bank->start); printk(KERN_NOTICE "Truncating RAM at %.8lx-%.8lx " "to -%.8lx (vmalloc region overlap).\n", bank->start, bank->start + bank->size - 1, @@ -827,101 +840,23 @@ static inline void prepare_page_table(void) } /* - * Reserve the various regions of node 0 + * Reserve the special regions of memory */ -void __init reserve_node_zero(pg_data_t *pgdat) +void __init arm_mm_memblock_reserve(void) { - unsigned long res_size = 0; - - /* - * Register the kernel text and data with bootmem. - * Note that this can only be in node 0. - */ -#ifdef CONFIG_XIP_KERNEL - reserve_bootmem_node(pgdat, __pa(_data), _end - _data, - BOOTMEM_DEFAULT); -#else - reserve_bootmem_node(pgdat, __pa(_stext), _end - _stext, - BOOTMEM_DEFAULT); -#endif - /* * Reserve the page tables. These are already in use, * and can only be in node 0. */ - reserve_bootmem_node(pgdat, __pa(swapper_pg_dir), - PTRS_PER_PGD * sizeof(pgd_t), BOOTMEM_DEFAULT); - - /* - * Hmm... This should go elsewhere, but we really really need to - * stop things allocating the low memory; ideally we need a better - * implementation of GFP_DMA which does not assume that DMA-able - * memory starts at zero. - */ - if (machine_is_integrator() || machine_is_cintegrator()) - res_size = __pa(swapper_pg_dir) - PHYS_OFFSET; - - /* - * These should likewise go elsewhere. They pre-reserve the - * screen memory region at the start of main system memory. - */ - if (machine_is_edb7211()) - res_size = 0x00020000; - if (machine_is_p720t()) - res_size = 0x00014000; - - /* H1940, RX3715 and RX1950 need to reserve this for suspend */ - - if (machine_is_h1940() || machine_is_rx3715() - || machine_is_rx1950()) { - reserve_bootmem_node(pgdat, 0x30003000, 0x1000, - BOOTMEM_DEFAULT); - reserve_bootmem_node(pgdat, 0x30081000, 0x1000, - BOOTMEM_DEFAULT); - } - - if (machine_is_palmld() || machine_is_palmtx()) { - reserve_bootmem_node(pgdat, 0xa0000000, 0x1000, - BOOTMEM_EXCLUSIVE); - reserve_bootmem_node(pgdat, 0xa0200000, 0x1000, - BOOTMEM_EXCLUSIVE); - } - - if (machine_is_treo680() || machine_is_centro()) { - reserve_bootmem_node(pgdat, 0xa0000000, 0x1000, - BOOTMEM_EXCLUSIVE); - reserve_bootmem_node(pgdat, 0xa2000000, 0x1000, - BOOTMEM_EXCLUSIVE); - } - - if (machine_is_palmt5()) - reserve_bootmem_node(pgdat, 0xa0200000, 0x1000, - BOOTMEM_EXCLUSIVE); - - /* - * U300 - This platform family can share physical memory - * between two ARM cpus, one running Linux and the other - * running another OS. - */ - if (machine_is_u300()) { -#ifdef CONFIG_MACH_U300_SINGLE_RAM -#if ((CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1) == 1) && \ - CONFIG_MACH_U300_2MB_ALIGNMENT_FIX - res_size = 0x00100000; -#endif -#endif - } + memblock_reserve(__pa(swapper_pg_dir), PTRS_PER_PGD * sizeof(pgd_t)); #ifdef CONFIG_SA1111 /* * Because of the SA1111 DMA bug, we want to preserve our * precious DMA-able memory... */ - res_size = __pa(swapper_pg_dir) - PHYS_OFFSET; + memblock_reserve(PHYS_OFFSET, __pa(swapper_pg_dir) - PHYS_OFFSET); #endif - if (res_size) - reserve_bootmem_node(pgdat, PHYS_OFFSET, res_size, - BOOTMEM_DEFAULT); } /* @@ -940,7 +875,7 @@ static void __init devicemaps_init(struct machine_desc *mdesc) /* * Allocate the vector page early. */ - vectors = alloc_bootmem_low_pages(PAGE_SIZE); + vectors = early_alloc(PAGE_SIZE); for (addr = VMALLOC_END; addr; addr += PGDIR_SIZE) pmd_clear(pmd_off_k(addr)); @@ -1011,11 +946,8 @@ static void __init devicemaps_init(struct machine_desc *mdesc) static void __init kmap_init(void) { #ifdef CONFIG_HIGHMEM - pmd_t *pmd = pmd_off_k(PKMAP_BASE); - pte_t *pte = alloc_bootmem_low_pages(2 * PTRS_PER_PTE * sizeof(pte_t)); - BUG_ON(!pmd_none(*pmd) || !pte); - __pmd_populate(pmd, __pa(pte) | _PAGE_KERNEL_TABLE); - pkmap_page_table = pte + PTRS_PER_PTE; + pkmap_page_table = early_pte_alloc(pmd_off_k(PKMAP_BASE), + PKMAP_BASE, _PAGE_KERNEL_TABLE); #endif } @@ -1066,17 +998,16 @@ void __init paging_init(struct machine_desc *mdesc) sanity_check_meminfo(); prepare_page_table(); map_lowmem(); - bootmem_init(); devicemaps_init(mdesc); kmap_init(); top_pmd = pmd_off_k(0xffff0000); - /* - * allocate the zero page. Note that this always succeeds and - * returns a zeroed result. - */ - zero_page = alloc_bootmem_low_pages(PAGE_SIZE); + /* allocate the zero page. */ + zero_page = early_alloc(PAGE_SIZE); + + bootmem_init(); + empty_zero_page = virt_to_page(zero_page); __flush_dcache_page(NULL, empty_zero_page); } diff --git a/arch/arm/mm/nommu.c b/arch/arm/mm/nommu.c index 33b327379f07..687d02319a41 100644 --- a/arch/arm/mm/nommu.c +++ b/arch/arm/mm/nommu.c @@ -6,8 +6,8 @@ #include <linux/module.h> #include <linux/mm.h> #include <linux/pagemap.h> -#include <linux/bootmem.h> #include <linux/io.h> +#include <linux/memblock.h> #include <asm/cacheflush.h> #include <asm/sections.h> @@ -17,30 +17,14 @@ #include "mm.h" -/* - * Reserve the various regions of node 0 - */ -void __init reserve_node_zero(pg_data_t *pgdat) +void __init arm_mm_memblock_reserve(void) { /* - * Register the kernel text and data with bootmem. - * Note that this can only be in node 0. - */ -#ifdef CONFIG_XIP_KERNEL - reserve_bootmem_node(pgdat, __pa(_data), _end - _data, - BOOTMEM_DEFAULT); -#else - reserve_bootmem_node(pgdat, __pa(_stext), _end - _stext, - BOOTMEM_DEFAULT); -#endif - - /* * Register the exception vector page. * some architectures which the DRAM is the exception vector to trap, * alloc_page breaks with error, although it is not NULL, but "0." */ - reserve_bootmem_node(pgdat, CONFIG_VECTORS_BASE, PAGE_SIZE, - BOOTMEM_DEFAULT); + memblock_reserve(CONFIG_VECTORS_BASE, PAGE_SIZE); } /* diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S index 7a5337ed7d68..2f5a3c23a0fe 100644 --- a/arch/arm/mm/proc-v6.S +++ b/arch/arm/mm/proc-v6.S @@ -239,7 +239,8 @@ __v6_proc_info: b __v6_setup .long cpu_arch_name .long cpu_elf_name - .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP|HWCAP_JAVA + /* See also feat_v6_fixup() for HWCAP_TLS */ + .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP|HWCAP_JAVA|HWCAP_TLS .long cpu_v6_name .long v6_processor_functions .long v6wbi_tlb_fns @@ -262,7 +263,7 @@ __pj4_v6_proc_info: b __v6_setup .long cpu_arch_name .long cpu_elf_name - .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP + .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP|HWCAP_TLS .long cpu_pj4_name .long v6_processor_functions .long v6wbi_tlb_fns diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index 7aaf88a3b7aa..8071bcd4c995 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -344,7 +344,7 @@ __v7_proc_info: b __v7_setup .long cpu_arch_name .long cpu_elf_name - .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP + .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP|HWCAP_TLS .long cpu_v7_name .long v7_processor_functions .long v7wbi_tlb_fns diff --git a/arch/arm/plat-iop/time.c b/arch/arm/plat-iop/time.c index 6c8a02ad98e3..85d3e55ca4a9 100644 --- a/arch/arm/plat-iop/time.c +++ b/arch/arm/plat-iop/time.c @@ -29,6 +29,11 @@ #include <mach/time.h> /* + * Minimum clocksource/clockevent timer range in seconds + */ +#define IOP_MIN_RANGE 4 + +/* * IOP clocksource (free-running timer 1). */ static cycle_t iop_clocksource_read(struct clocksource *unused) @@ -44,27 +49,6 @@ static struct clocksource iop_clocksource = { .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; -static void __init iop_clocksource_set_hz(struct clocksource *cs, unsigned int hz) -{ - u64 temp; - u32 shift; - - /* Find shift and mult values for hz. */ - shift = 32; - do { - temp = (u64) NSEC_PER_SEC << shift; - do_div(temp, hz); - if ((temp >> 32) == 0) - break; - } while (--shift != 0); - - cs->shift = shift; - cs->mult = (u32) temp; - - printk(KERN_INFO "clocksource: %s uses shift %u mult %#x\n", - cs->name, cs->shift, cs->mult); -} - /* * IOP sched_clock() implementation via its clocksource. */ @@ -130,27 +114,6 @@ static struct clock_event_device iop_clockevent = { .set_mode = iop_set_mode, }; -static void __init iop_clockevent_set_hz(struct clock_event_device *ce, unsigned int hz) -{ - u64 temp; - u32 shift; - - /* Find shift and mult values for hz. */ - shift = 32; - do { - temp = (u64) hz << shift; - do_div(temp, NSEC_PER_SEC); - if ((temp >> 32) == 0) - break; - } while (--shift != 0); - - ce->shift = shift; - ce->mult = (u32) temp; - - printk(KERN_INFO "clockevent: %s uses shift %u mult %#lx\n", - ce->name, ce->shift, ce->mult); -} - static irqreturn_t iop_timer_interrupt(int irq, void *dev_id) { @@ -190,7 +153,8 @@ void __init iop_init_time(unsigned long tick_rate) */ write_tmr0(timer_ctl & ~IOP_TMR_EN); setup_irq(IRQ_IOP_TIMER0, &iop_timer_irq); - iop_clockevent_set_hz(&iop_clockevent, tick_rate); + clockevents_calc_mult_shift(&iop_clockevent, + tick_rate, IOP_MIN_RANGE); iop_clockevent.max_delta_ns = clockevent_delta2ns(0xfffffffe, &iop_clockevent); iop_clockevent.min_delta_ns = @@ -207,6 +171,7 @@ void __init iop_init_time(unsigned long tick_rate) write_trr1(0xffffffff); write_tcr1(0xffffffff); write_tmr1(timer_ctl); - iop_clocksource_set_hz(&iop_clocksource, tick_rate); + clocksource_calc_mult_shift(&iop_clocksource, tick_rate, + IOP_MIN_RANGE); clocksource_register(&iop_clocksource); } diff --git a/arch/arm/plat-nomadik/gpio.c b/arch/arm/plat-nomadik/gpio.c index 5a6ef252c38b..977c8f9a07a2 100644 --- a/arch/arm/plat-nomadik/gpio.c +++ b/arch/arm/plat-nomadik/gpio.c @@ -23,6 +23,7 @@ #include <linux/irq.h> #include <linux/slab.h> +#include <plat/pincfg.h> #include <mach/hardware.h> #include <mach/gpio.h> @@ -46,28 +47,217 @@ struct nmk_gpio_chip { u32 edge_falling; }; +static void __nmk_gpio_set_mode(struct nmk_gpio_chip *nmk_chip, + unsigned offset, int gpio_mode) +{ + u32 bit = 1 << offset; + u32 afunc, bfunc; + + afunc = readl(nmk_chip->addr + NMK_GPIO_AFSLA) & ~bit; + bfunc = readl(nmk_chip->addr + NMK_GPIO_AFSLB) & ~bit; + if (gpio_mode & NMK_GPIO_ALT_A) + afunc |= bit; + if (gpio_mode & NMK_GPIO_ALT_B) + bfunc |= bit; + writel(afunc, nmk_chip->addr + NMK_GPIO_AFSLA); + writel(bfunc, nmk_chip->addr + NMK_GPIO_AFSLB); +} + +static void __nmk_gpio_set_slpm(struct nmk_gpio_chip *nmk_chip, + unsigned offset, enum nmk_gpio_slpm mode) +{ + u32 bit = 1 << offset; + u32 slpm; + + slpm = readl(nmk_chip->addr + NMK_GPIO_SLPC); + if (mode == NMK_GPIO_SLPM_NOCHANGE) + slpm |= bit; + else + slpm &= ~bit; + writel(slpm, nmk_chip->addr + NMK_GPIO_SLPC); +} + +static void __nmk_gpio_set_pull(struct nmk_gpio_chip *nmk_chip, + unsigned offset, enum nmk_gpio_pull pull) +{ + u32 bit = 1 << offset; + u32 pdis; + + pdis = readl(nmk_chip->addr + NMK_GPIO_PDIS); + if (pull == NMK_GPIO_PULL_NONE) + pdis |= bit; + else + pdis &= ~bit; + writel(pdis, nmk_chip->addr + NMK_GPIO_PDIS); + + if (pull == NMK_GPIO_PULL_UP) + writel(bit, nmk_chip->addr + NMK_GPIO_DATS); + else if (pull == NMK_GPIO_PULL_DOWN) + writel(bit, nmk_chip->addr + NMK_GPIO_DATC); +} + +static void __nmk_gpio_make_input(struct nmk_gpio_chip *nmk_chip, + unsigned offset) +{ + writel(1 << offset, nmk_chip->addr + NMK_GPIO_DIRC); +} + +static void __nmk_config_pin(struct nmk_gpio_chip *nmk_chip, unsigned offset, + pin_cfg_t cfg) +{ + static const char *afnames[] = { + [NMK_GPIO_ALT_GPIO] = "GPIO", + [NMK_GPIO_ALT_A] = "A", + [NMK_GPIO_ALT_B] = "B", + [NMK_GPIO_ALT_C] = "C" + }; + static const char *pullnames[] = { + [NMK_GPIO_PULL_NONE] = "none", + [NMK_GPIO_PULL_UP] = "up", + [NMK_GPIO_PULL_DOWN] = "down", + [3] /* illegal */ = "??" + }; + static const char *slpmnames[] = { + [NMK_GPIO_SLPM_INPUT] = "input", + [NMK_GPIO_SLPM_NOCHANGE] = "no-change", + }; + + int pin = PIN_NUM(cfg); + int pull = PIN_PULL(cfg); + int af = PIN_ALT(cfg); + int slpm = PIN_SLPM(cfg); + + dev_dbg(nmk_chip->chip.dev, "pin %d: af %s, pull %s, slpm %s\n", + pin, afnames[af], pullnames[pull], slpmnames[slpm]); + + __nmk_gpio_make_input(nmk_chip, offset); + __nmk_gpio_set_pull(nmk_chip, offset, pull); + __nmk_gpio_set_slpm(nmk_chip, offset, slpm); + __nmk_gpio_set_mode(nmk_chip, offset, af); +} + +/** + * nmk_config_pin - configure a pin's mux attributes + * @cfg: pin confguration + * + * Configures a pin's mode (alternate function or GPIO), its pull up status, + * and its sleep mode based on the specified configuration. The @cfg is + * usually one of the SoC specific macros defined in mach/<soc>-pins.h. These + * are constructed using, and can be further enhanced with, the macros in + * plat/pincfg.h. + * + * If a pin's mode is set to GPIO, it is configured as an input to avoid + * side-effects. The gpio can be manipulated later using standard GPIO API + * calls. + */ +int nmk_config_pin(pin_cfg_t cfg) +{ + struct nmk_gpio_chip *nmk_chip; + int gpio = PIN_NUM(cfg); + unsigned long flags; + + nmk_chip = get_irq_chip_data(NOMADIK_GPIO_TO_IRQ(gpio)); + if (!nmk_chip) + return -EINVAL; + + spin_lock_irqsave(&nmk_chip->lock, flags); + __nmk_config_pin(nmk_chip, gpio - nmk_chip->chip.base, cfg); + spin_unlock_irqrestore(&nmk_chip->lock, flags); + + return 0; +} +EXPORT_SYMBOL(nmk_config_pin); + +/** + * nmk_config_pins - configure several pins at once + * @cfgs: array of pin configurations + * @num: number of elments in the array + * + * Configures several pins using nmk_config_pin(). Refer to that function for + * further information. + */ +int nmk_config_pins(pin_cfg_t *cfgs, int num) +{ + int ret = 0; + int i; + + for (i = 0; i < num; i++) { + int ret = nmk_config_pin(cfgs[i]); + if (ret) + break; + } + + return ret; +} +EXPORT_SYMBOL(nmk_config_pins); + +/** + * nmk_gpio_set_slpm() - configure the sleep mode of a pin + * @gpio: pin number + * @mode: NMK_GPIO_SLPM_INPUT or NMK_GPIO_SLPM_NOCHANGE, + * + * Sets the sleep mode of a pin. If @mode is NMK_GPIO_SLPM_INPUT, the pin is + * changed to an input (with pullup/down enabled) in sleep and deep sleep. If + * @mode is NMK_GPIO_SLPM_NOCHANGE, the pin remains in the state it was + * configured even when in sleep and deep sleep. + */ +int nmk_gpio_set_slpm(int gpio, enum nmk_gpio_slpm mode) +{ + struct nmk_gpio_chip *nmk_chip; + unsigned long flags; + + nmk_chip = get_irq_chip_data(NOMADIK_GPIO_TO_IRQ(gpio)); + if (!nmk_chip) + return -EINVAL; + + spin_lock_irqsave(&nmk_chip->lock, flags); + __nmk_gpio_set_slpm(nmk_chip, gpio - nmk_chip->chip.base, mode); + spin_unlock_irqrestore(&nmk_chip->lock, flags); + + return 0; +} + +/** + * nmk_gpio_set_pull() - enable/disable pull up/down on a gpio + * @gpio: pin number + * @pull: one of NMK_GPIO_PULL_DOWN, NMK_GPIO_PULL_UP, and NMK_GPIO_PULL_NONE + * + * Enables/disables pull up/down on a specified pin. This only takes effect if + * the pin is configured as an input (either explicitly or by the alternate + * function). + * + * NOTE: If enabling the pull up/down, the caller must ensure that the GPIO is + * configured as an input. Otherwise, due to the way the controller registers + * work, this function will change the value output on the pin. + */ +int nmk_gpio_set_pull(int gpio, enum nmk_gpio_pull pull) +{ + struct nmk_gpio_chip *nmk_chip; + unsigned long flags; + + nmk_chip = get_irq_chip_data(NOMADIK_GPIO_TO_IRQ(gpio)); + if (!nmk_chip) + return -EINVAL; + + spin_lock_irqsave(&nmk_chip->lock, flags); + __nmk_gpio_set_pull(nmk_chip, gpio - nmk_chip->chip.base, pull); + spin_unlock_irqrestore(&nmk_chip->lock, flags); + + return 0; +} + /* Mode functions */ int nmk_gpio_set_mode(int gpio, int gpio_mode) { struct nmk_gpio_chip *nmk_chip; unsigned long flags; - u32 afunc, bfunc, bit; nmk_chip = get_irq_chip_data(NOMADIK_GPIO_TO_IRQ(gpio)); if (!nmk_chip) return -EINVAL; - bit = 1 << (gpio - nmk_chip->chip.base); - spin_lock_irqsave(&nmk_chip->lock, flags); - afunc = readl(nmk_chip->addr + NMK_GPIO_AFSLA) & ~bit; - bfunc = readl(nmk_chip->addr + NMK_GPIO_AFSLB) & ~bit; - if (gpio_mode & NMK_GPIO_ALT_A) - afunc |= bit; - if (gpio_mode & NMK_GPIO_ALT_B) - bfunc |= bit; - writel(afunc, nmk_chip->addr + NMK_GPIO_AFSLA); - writel(bfunc, nmk_chip->addr + NMK_GPIO_AFSLB); + __nmk_gpio_set_mode(nmk_chip, gpio - nmk_chip->chip.base, gpio_mode); spin_unlock_irqrestore(&nmk_chip->lock, flags); return 0; @@ -111,32 +301,41 @@ static void nmk_gpio_irq_ack(unsigned int irq) writel(nmk_gpio_get_bitmask(gpio), nmk_chip->addr + NMK_GPIO_IC); } +enum nmk_gpio_irq_type { + NORMAL, + WAKE, +}; + static void __nmk_gpio_irq_modify(struct nmk_gpio_chip *nmk_chip, - int gpio, bool enable) + int gpio, enum nmk_gpio_irq_type which, + bool enable) { + u32 rimsc = which == WAKE ? NMK_GPIO_RWIMSC : NMK_GPIO_RIMSC; + u32 fimsc = which == WAKE ? NMK_GPIO_FWIMSC : NMK_GPIO_FIMSC; u32 bitmask = nmk_gpio_get_bitmask(gpio); u32 reg; /* we must individually set/clear the two edges */ if (nmk_chip->edge_rising & bitmask) { - reg = readl(nmk_chip->addr + NMK_GPIO_RIMSC); + reg = readl(nmk_chip->addr + rimsc); if (enable) reg |= bitmask; else reg &= ~bitmask; - writel(reg, nmk_chip->addr + NMK_GPIO_RIMSC); + writel(reg, nmk_chip->addr + rimsc); } if (nmk_chip->edge_falling & bitmask) { - reg = readl(nmk_chip->addr + NMK_GPIO_FIMSC); + reg = readl(nmk_chip->addr + fimsc); if (enable) reg |= bitmask; else reg &= ~bitmask; - writel(reg, nmk_chip->addr + NMK_GPIO_FIMSC); + writel(reg, nmk_chip->addr + fimsc); } } -static void nmk_gpio_irq_modify(unsigned int irq, bool enable) +static int nmk_gpio_irq_modify(unsigned int irq, enum nmk_gpio_irq_type which, + bool enable) { int gpio; struct nmk_gpio_chip *nmk_chip; @@ -147,26 +346,35 @@ static void nmk_gpio_irq_modify(unsigned int irq, bool enable) nmk_chip = get_irq_chip_data(irq); bitmask = nmk_gpio_get_bitmask(gpio); if (!nmk_chip) - return; + return -EINVAL; spin_lock_irqsave(&nmk_chip->lock, flags); - __nmk_gpio_irq_modify(nmk_chip, gpio, enable); + __nmk_gpio_irq_modify(nmk_chip, gpio, which, enable); spin_unlock_irqrestore(&nmk_chip->lock, flags); + + return 0; } static void nmk_gpio_irq_mask(unsigned int irq) { - nmk_gpio_irq_modify(irq, false); -}; + nmk_gpio_irq_modify(irq, NORMAL, false); +} static void nmk_gpio_irq_unmask(unsigned int irq) { - nmk_gpio_irq_modify(irq, true); + nmk_gpio_irq_modify(irq, NORMAL, true); +} + +static int nmk_gpio_irq_set_wake(unsigned int irq, unsigned int on) +{ + return nmk_gpio_irq_modify(irq, WAKE, on); } static int nmk_gpio_irq_set_type(unsigned int irq, unsigned int type) { - bool enabled = !(irq_to_desc(irq)->status & IRQ_DISABLED); + struct irq_desc *desc = irq_to_desc(irq); + bool enabled = !(desc->status & IRQ_DISABLED); + bool wake = desc->wake_depth; int gpio; struct nmk_gpio_chip *nmk_chip; unsigned long flags; @@ -186,7 +394,10 @@ static int nmk_gpio_irq_set_type(unsigned int irq, unsigned int type) spin_lock_irqsave(&nmk_chip->lock, flags); if (enabled) - __nmk_gpio_irq_modify(nmk_chip, gpio, false); + __nmk_gpio_irq_modify(nmk_chip, gpio, NORMAL, false); + + if (wake) + __nmk_gpio_irq_modify(nmk_chip, gpio, WAKE, false); nmk_chip->edge_rising &= ~bitmask; if (type & IRQ_TYPE_EDGE_RISING) @@ -197,7 +408,10 @@ static int nmk_gpio_irq_set_type(unsigned int irq, unsigned int type) nmk_chip->edge_falling |= bitmask; if (enabled) - __nmk_gpio_irq_modify(nmk_chip, gpio, true); + __nmk_gpio_irq_modify(nmk_chip, gpio, NORMAL, true); + + if (wake) + __nmk_gpio_irq_modify(nmk_chip, gpio, WAKE, true); spin_unlock_irqrestore(&nmk_chip->lock, flags); @@ -210,6 +424,7 @@ static struct irq_chip nmk_gpio_irq_chip = { .mask = nmk_gpio_irq_mask, .unmask = nmk_gpio_irq_unmask, .set_type = nmk_gpio_irq_set_type, + .set_wake = nmk_gpio_irq_set_wake, }; static void nmk_gpio_irq_handler(unsigned int irq, struct irq_desc *desc) @@ -266,16 +481,6 @@ static int nmk_gpio_make_input(struct gpio_chip *chip, unsigned offset) return 0; } -static int nmk_gpio_make_output(struct gpio_chip *chip, unsigned offset, - int val) -{ - struct nmk_gpio_chip *nmk_chip = - container_of(chip, struct nmk_gpio_chip, chip); - - writel(1 << offset, nmk_chip->addr + NMK_GPIO_DIRS); - return 0; -} - static int nmk_gpio_get_input(struct gpio_chip *chip, unsigned offset) { struct nmk_gpio_chip *nmk_chip = @@ -298,12 +503,33 @@ static void nmk_gpio_set_output(struct gpio_chip *chip, unsigned offset, writel(bit, nmk_chip->addr + NMK_GPIO_DATC); } +static int nmk_gpio_make_output(struct gpio_chip *chip, unsigned offset, + int val) +{ + struct nmk_gpio_chip *nmk_chip = + container_of(chip, struct nmk_gpio_chip, chip); + + writel(1 << offset, nmk_chip->addr + NMK_GPIO_DIRS); + nmk_gpio_set_output(chip, offset, val); + + return 0; +} + +static int nmk_gpio_to_irq(struct gpio_chip *chip, unsigned offset) +{ + struct nmk_gpio_chip *nmk_chip = + container_of(chip, struct nmk_gpio_chip, chip); + + return NOMADIK_GPIO_TO_IRQ(nmk_chip->chip.base) + offset; +} + /* This structure is replicated for each GPIO block allocated at probe time */ static struct gpio_chip nmk_gpio_template = { .direction_input = nmk_gpio_make_input, .get = nmk_gpio_get_input, .direction_output = nmk_gpio_make_output, .set = nmk_gpio_set_output, + .to_irq = nmk_gpio_to_irq, .ngpio = NMK_GPIO_PER_CHIP, .can_sleep = 0, }; @@ -393,30 +619,12 @@ out: return ret; } -static int __exit nmk_gpio_remove(struct platform_device *dev) -{ - struct nmk_gpio_chip *nmk_chip; - struct resource *res; - - res = platform_get_resource(dev, IORESOURCE_MEM, 0); - - nmk_chip = platform_get_drvdata(dev); - gpiochip_remove(&nmk_chip->chip); - clk_disable(nmk_chip->clk); - clk_put(nmk_chip->clk); - kfree(nmk_chip); - release_mem_region(res->start, resource_size(res)); - return 0; -} - - static struct platform_driver nmk_gpio_driver = { .driver = { .owner = THIS_MODULE, .name = "gpio", }, .probe = nmk_gpio_probe, - .remove = __exit_p(nmk_gpio_remove), .suspend = NULL, /* to be done */ .resume = NULL, }; @@ -426,7 +634,7 @@ static int __init nmk_gpio_init(void) return platform_driver_register(&nmk_gpio_driver); } -arch_initcall(nmk_gpio_init); +core_initcall(nmk_gpio_init); MODULE_AUTHOR("Prafulla WADASKAR and Alessandro Rubini"); MODULE_DESCRIPTION("Nomadik GPIO Driver"); diff --git a/arch/arm/plat-nomadik/include/plat/gpio.h b/arch/arm/plat-nomadik/include/plat/gpio.h index 4200811249ca..aba355101f49 100644 --- a/arch/arm/plat-nomadik/include/plat/gpio.h +++ b/arch/arm/plat-nomadik/include/plat/gpio.h @@ -55,6 +55,21 @@ #define NMK_GPIO_ALT_B 2 #define NMK_GPIO_ALT_C (NMK_GPIO_ALT_A | NMK_GPIO_ALT_B) +/* Pull up/down values */ +enum nmk_gpio_pull { + NMK_GPIO_PULL_NONE, + NMK_GPIO_PULL_UP, + NMK_GPIO_PULL_DOWN, +}; + +/* Sleep mode */ +enum nmk_gpio_slpm { + NMK_GPIO_SLPM_INPUT, + NMK_GPIO_SLPM_NOCHANGE, +}; + +extern int nmk_gpio_set_slpm(int gpio, enum nmk_gpio_slpm mode); +extern int nmk_gpio_set_pull(int gpio, enum nmk_gpio_pull pull); extern int nmk_gpio_set_mode(int gpio, int gpio_mode); extern int nmk_gpio_get_mode(int gpio); diff --git a/arch/arm/plat-nomadik/include/plat/mtu.h b/arch/arm/plat-nomadik/include/plat/mtu.h index 42c907258b14..65704a3d4241 100644 --- a/arch/arm/plat-nomadik/include/plat/mtu.h +++ b/arch/arm/plat-nomadik/include/plat/mtu.h @@ -1,6 +1,12 @@ #ifndef __PLAT_MTU_H #define __PLAT_MTU_H +/* + * Guaranteed runtime conversion range in seconds for + * the clocksource and clockevent. + */ +#define MTU_MIN_RANGE 4 + /* should be set by the platform code */ extern void __iomem *mtu_base; diff --git a/arch/arm/plat-nomadik/include/plat/pincfg.h b/arch/arm/plat-nomadik/include/plat/pincfg.h new file mode 100644 index 000000000000..7eed11c1038d --- /dev/null +++ b/arch/arm/plat-nomadik/include/plat/pincfg.h @@ -0,0 +1,72 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * License terms: GNU General Public License, version 2 + * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson + * + * Based on arch/arm/mach-pxa/include/mach/mfp.h: + * Copyright (C) 2007 Marvell International Ltd. + * eric miao <eric.miao@marvell.com> + */ + +#ifndef __PLAT_PINCFG_H +#define __PLAT_PINCFG_H + +/* + * pin configurations are represented by 32-bit integers: + * + * bit 0.. 8 - Pin Number (512 Pins Maximum) + * bit 9..10 - Alternate Function Selection + * bit 11..12 - Pull up/down state + * bit 13 - Sleep mode behaviour + * + * to facilitate the definition, the following macros are provided + * + * PIN_CFG_DEFAULT - default config (0): + * pull up/down = disabled + * sleep mode = input + * + * PIN_CFG - default config with alternate function + * PIN_CFG_PULL - default config with alternate function and pull up/down + */ + +typedef unsigned long pin_cfg_t; + +#define PIN_NUM_MASK 0x1ff +#define PIN_NUM(x) ((x) & PIN_NUM_MASK) + +#define PIN_ALT_SHIFT 9 +#define PIN_ALT_MASK (0x3 << PIN_ALT_SHIFT) +#define PIN_ALT(x) (((x) & PIN_ALT_MASK) >> PIN_ALT_SHIFT) +#define PIN_GPIO (NMK_GPIO_ALT_GPIO << PIN_ALT_SHIFT) +#define PIN_ALT_A (NMK_GPIO_ALT_A << PIN_ALT_SHIFT) +#define PIN_ALT_B (NMK_GPIO_ALT_B << PIN_ALT_SHIFT) +#define PIN_ALT_C (NMK_GPIO_ALT_C << PIN_ALT_SHIFT) + +#define PIN_PULL_SHIFT 11 +#define PIN_PULL_MASK (0x3 << PIN_PULL_SHIFT) +#define PIN_PULL(x) (((x) & PIN_PULL_MASK) >> PIN_PULL_SHIFT) +#define PIN_PULL_NONE (NMK_GPIO_PULL_NONE << PIN_PULL_SHIFT) +#define PIN_PULL_UP (NMK_GPIO_PULL_UP << PIN_PULL_SHIFT) +#define PIN_PULL_DOWN (NMK_GPIO_PULL_DOWN << PIN_PULL_SHIFT) + +#define PIN_SLPM_SHIFT 13 +#define PIN_SLPM_MASK (0x1 << PIN_SLPM_SHIFT) +#define PIN_SLPM(x) (((x) & PIN_SLPM_MASK) >> PIN_SLPM_SHIFT) +#define PIN_SLPM_INPUT (NMK_GPIO_SLPM_INPUT << PIN_SLPM_SHIFT) +#define PIN_SLPM_NOCHANGE (NMK_GPIO_SLPM_NOCHANGE << PIN_SLPM_SHIFT) + +#define PIN_CFG_DEFAULT (PIN_PULL_NONE | PIN_SLPM_INPUT) + +#define PIN_CFG(num, alt) \ + (PIN_CFG_DEFAULT |\ + (PIN_NUM(num) | PIN_##alt)) + +#define PIN_CFG_PULL(num, alt, pull) \ + ((PIN_CFG_DEFAULT & ~PIN_PULL_MASK) |\ + (PIN_NUM(num) | PIN_##alt | PIN_PULL_##pull)) + +extern int nmk_config_pin(pin_cfg_t cfg); +extern int nmk_config_pins(pin_cfg_t *cfgs, int num); + +#endif diff --git a/arch/arm/plat-nomadik/timer.c b/arch/arm/plat-nomadik/timer.c index 08aaa4a7f65f..ea3ca86c5283 100644 --- a/arch/arm/plat-nomadik/timer.c +++ b/arch/arm/plat-nomadik/timer.c @@ -42,7 +42,6 @@ static struct clocksource nmdk_clksrc = { .rating = 200, .read = nmdk_read_timer_dummy, .mask = CLOCKSOURCE_MASK(32), - .shift = 20, .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; @@ -82,6 +81,12 @@ static void nmdk_clkevt_mode(enum clock_event_mode mode, case CLOCK_EVT_MODE_UNUSED: /* disable irq */ writel(0, mtu_base + MTU_IMSC); + /* disable timer */ + cr = readl(mtu_base + MTU_CR(1)); + cr &= ~MTU_CRn_ENA; + writel(cr, mtu_base + MTU_CR(1)); + /* load some high default value */ + writel(0xffffffff, mtu_base + MTU_LR(1)); break; case CLOCK_EVT_MODE_RESUME: break; @@ -98,7 +103,6 @@ static int nmdk_clkevt_next(unsigned long evt, struct clock_event_device *ev) static struct clock_event_device nmdk_clkevt = { .name = "mtu_1", .features = CLOCK_EVT_FEAT_ONESHOT, - .shift = 32, .rating = 200, .set_mode = nmdk_clkevt_mode, .set_next_event = nmdk_clkevt_next, @@ -151,6 +155,7 @@ void __init nmdk_timer_init(void) } else { cr |= MTU_CRn_PRESCALE_1; } + clocksource_calc_mult_shift(&nmdk_clksrc, rate, MTU_MIN_RANGE); /* Timer 0 is the free running clocksource */ writel(cr, mtu_base + MTU_CR(0)); @@ -158,7 +163,6 @@ void __init nmdk_timer_init(void) writel(0, mtu_base + MTU_BGLR(0)); writel(cr | MTU_CRn_ENA, mtu_base + MTU_CR(0)); - nmdk_clksrc.mult = clocksource_hz2mult(rate, nmdk_clksrc.shift); /* Now the scheduling clock is ready */ nmdk_clksrc.read = nmdk_read_timer; @@ -175,8 +179,10 @@ void __init nmdk_timer_init(void) } else { cr |= MTU_CRn_PRESCALE_1; } + clockevents_calc_mult_shift(&nmdk_clkevt, rate, MTU_MIN_RANGE); + writel(cr | MTU_CRn_ONESHOT, mtu_base + MTU_CR(1)); /* off, currently */ - nmdk_clkevt.mult = div_sc(rate, NSEC_PER_SEC, nmdk_clkevt.shift); + nmdk_clkevt.max_delta_ns = clockevent_delta2ns(0xffffffff, &nmdk_clkevt); nmdk_clkevt.min_delta_ns = diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c index 219c01e82bc5..ebed82699eb2 100644 --- a/arch/arm/plat-omap/common.c +++ b/arch/arm/plat-omap/common.c @@ -22,6 +22,7 @@ #include <linux/serial_reg.h> #include <linux/clk.h> #include <linux/io.h> +#include <linux/omapfb.h> #include <mach/hardware.h> #include <asm/system.h> @@ -35,6 +36,7 @@ #include <plat/mux.h> #include <plat/fpga.h> #include <plat/serial.h> +#include <plat/vram.h> #include <plat/clock.h> @@ -81,6 +83,12 @@ const void *omap_get_var_config(u16 tag, size_t *len) } EXPORT_SYMBOL(omap_get_var_config); +void __init omap_reserve(void) +{ + omapfb_reserve_sdram_memblock(); + omap_vram_reserve_sdram_memblock(); +} + /* * 32KHz clocksource ... always available, on pretty most chips except * OMAP 730 and 1510. Other timers could be used as clocksources, with diff --git a/arch/arm/plat-omap/fb.c b/arch/arm/plat-omap/fb.c index d3eea4f47533..0054b9501a53 100644 --- a/arch/arm/plat-omap/fb.c +++ b/arch/arm/plat-omap/fb.c @@ -26,7 +26,7 @@ #include <linux/mm.h> #include <linux/init.h> #include <linux/platform_device.h> -#include <linux/bootmem.h> +#include <linux/memblock.h> #include <linux/io.h> #include <linux/omapfb.h> @@ -171,49 +171,78 @@ static int check_fbmem_region(int region_idx, struct omapfb_mem_region *rg, return 0; } +static int valid_sdram(unsigned long addr, unsigned long size) +{ + struct memblock_property res; + + res.base = addr; + res.size = size; + return !memblock_find(&res) && res.base == addr && res.size == size; +} + +static int reserve_sdram(unsigned long addr, unsigned long size) +{ + if (memblock_is_region_reserved(addr, size)) + return -EBUSY; + if (memblock_reserve(addr, size)) + return -ENOMEM; + return 0; +} + /* * Called from map_io. We need to call to this early enough so that we * can reserve the fixed SDRAM regions before VM could get hold of them. */ -void __init omapfb_reserve_sdram(void) +void __init omapfb_reserve_sdram_memblock(void) { - struct bootmem_data *bdata; - unsigned long sdram_start, sdram_size; - unsigned long reserved; - int i; + unsigned long reserved = 0; + int i; if (config_invalid) return; - bdata = NODE_DATA(0)->bdata; - sdram_start = bdata->node_min_pfn << PAGE_SHIFT; - sdram_size = (bdata->node_low_pfn << PAGE_SHIFT) - sdram_start; - reserved = 0; for (i = 0; ; i++) { - struct omapfb_mem_region rg; + struct omapfb_mem_region rg; if (get_fbmem_region(i, &rg) < 0) break; + if (i == OMAPFB_PLANE_NUM) { - printk(KERN_ERR - "Extraneous FB mem configuration entries\n"); + pr_err("Extraneous FB mem configuration entries\n"); config_invalid = 1; return; } + /* Check if it's our memory type. */ - if (set_fbmem_region_type(&rg, OMAPFB_MEMTYPE_SDRAM, - sdram_start, sdram_size) < 0 || - (rg.type != OMAPFB_MEMTYPE_SDRAM)) + if (rg.type != OMAPFB_MEMTYPE_SDRAM) continue; - BUG_ON(omapfb_config.mem_desc.region[i].size); - if (check_fbmem_region(i, &rg, sdram_start, sdram_size) < 0) { + + /* Check if the region falls within SDRAM */ + if (rg.paddr && !valid_sdram(rg.paddr, rg.size)) + continue; + + if (rg.size == 0) { + pr_err("Zero size for FB region %d\n", i); config_invalid = 1; return; } + if (rg.paddr) { - reserve_bootmem(rg.paddr, rg.size, BOOTMEM_DEFAULT); + if (reserve_sdram(rg.paddr, rg.size)) { + pr_err("Trying to use reserved memory for FB region %d\n", + i); + config_invalid = 1; + return; + } reserved += rg.size; } + + if (omapfb_config.mem_desc.region[i].size) { + pr_err("FB region %d already set\n", i); + config_invalid = 1; + return; + } + omapfb_config.mem_desc.region[i] = rg; configured_regions++; } @@ -359,7 +388,10 @@ static inline int omap_init_fb(void) arch_initcall(omap_init_fb); -void omapfb_reserve_sdram(void) {} +void omapfb_reserve_sdram_memblock(void) +{ +} + unsigned long omapfb_reserve_sram(unsigned long sram_pstart, unsigned long sram_vstart, unsigned long sram_size, @@ -375,7 +407,10 @@ void omapfb_set_platform_data(struct omapfb_platform_data *data) { } -void omapfb_reserve_sdram(void) {} +void omapfb_reserve_sdram_memblock(void) +{ +} + unsigned long omapfb_reserve_sram(unsigned long sram_pstart, unsigned long sram_vstart, unsigned long sram_size, diff --git a/arch/arm/plat-omap/include/plat/common.h b/arch/arm/plat-omap/include/plat/common.h index d265018f5e6b..5e4afbee0fd7 100644 --- a/arch/arm/plat-omap/include/plat/common.h +++ b/arch/arm/plat-omap/include/plat/common.h @@ -34,6 +34,8 @@ struct sys_timer; extern void omap_map_common_io(void); extern struct sys_timer omap_timer; +extern void omap_reserve(void); + /* * IO bases for various OMAP processors * Except the tap base, rest all the io bases diff --git a/arch/arm/plat-omap/include/plat/vram.h b/arch/arm/plat-omap/include/plat/vram.h index edd4987758a6..0aa4ecd12c7d 100644 --- a/arch/arm/plat-omap/include/plat/vram.h +++ b/arch/arm/plat-omap/include/plat/vram.h @@ -38,7 +38,7 @@ extern void omap_vram_get_info(unsigned long *vram, unsigned long *free_vram, extern void omap_vram_set_sdram_vram(u32 size, u32 start); extern void omap_vram_set_sram_vram(u32 size, u32 start); -extern void omap_vram_reserve_sdram(void); +extern void omap_vram_reserve_sdram_memblock(void); extern unsigned long omap_vram_reserve_sram(unsigned long sram_pstart, unsigned long sram_vstart, unsigned long sram_size, @@ -48,7 +48,7 @@ extern unsigned long omap_vram_reserve_sram(unsigned long sram_pstart, static inline void omap_vram_set_sdram_vram(u32 size, u32 start) { } static inline void omap_vram_set_sram_vram(u32 size, u32 start) { } -static inline void omap_vram_reserve_sdram(void) { } +static inline void omap_vram_reserve_sdram_memblock(void) { } static inline unsigned long omap_vram_reserve_sram(unsigned long sram_pstart, unsigned long sram_vstart, unsigned long sram_size, diff --git a/arch/arm/plat-spear/time.c b/arch/arm/plat-spear/time.c index a1025d38f383..ab211652e4ca 100644 --- a/arch/arm/plat-spear/time.c +++ b/arch/arm/plat-spear/time.c @@ -58,6 +58,11 @@ #define INT_STATUS 0x1 +/* + * Minimum clocksource/clockevent timer range in seconds + */ +#define SPEAR_MIN_RANGE 4 + static __iomem void *gpt_base; static struct clk *gpt_clk; @@ -66,44 +71,6 @@ static void clockevent_set_mode(enum clock_event_mode mode, static int clockevent_next_event(unsigned long evt, struct clock_event_device *clk_event_dev); -/* - * Following clocksource_set_clock and clockevent_set_clock picked - * from arch/mips/kernel/time.c - */ - -void __init clocksource_set_clock(struct clocksource *cs, unsigned int clock) -{ - u64 temp; - u32 shift; - - /* Find a shift value */ - for (shift = 32; shift > 0; shift--) { - temp = (u64) NSEC_PER_SEC << shift; - do_div(temp, clock); - if ((temp >> 32) == 0) - break; - } - cs->shift = shift; - cs->mult = (u32) temp; -} - -void __init clockevent_set_clock(struct clock_event_device *cd, - unsigned int clock) -{ - u64 temp; - u32 shift; - - /* Find a shift value */ - for (shift = 32; shift > 0; shift--) { - temp = (u64) clock << shift; - do_div(temp, NSEC_PER_SEC); - if ((temp >> 32) == 0) - break; - } - cd->shift = shift; - cd->mult = (u32) temp; -} - static cycle_t clocksource_read_cycles(struct clocksource *cs) { return (cycle_t) readw(gpt_base + COUNT(CLKSRC)); @@ -138,7 +105,7 @@ static void spear_clocksource_init(void) val |= CTRL_ENABLE ; writew(val, gpt_base + CR(CLKSRC)); - clocksource_set_clock(&clksrc, tick_rate); + clocksource_calc_mult_shift(&clksrc, tick_rate, SPEAR_MIN_RANGE); /* register the clocksource */ clocksource_register(&clksrc); @@ -233,7 +200,7 @@ static void __init spear_clockevent_init(void) tick_rate = clk_get_rate(gpt_clk); tick_rate >>= CTRL_PRESCALER16; - clockevent_set_clock(&clkevt, tick_rate); + clockevents_calc_mult_shift(&clkevt, tick_rate, SPEAR_MIN_RANGE); clkevt.max_delta_ns = clockevent_delta2ns(0xfff0, &clkevt); diff --git a/arch/arm/plat-versatile/Makefile b/arch/arm/plat-versatile/Makefile index 9b1a66816aa6..5cf88e8427b1 100644 --- a/arch/arm/plat-versatile/Makefile +++ b/arch/arm/plat-versatile/Makefile @@ -2,3 +2,7 @@ obj-y := clock.o obj-$(CONFIG_ARM_TIMER_SP804) += timer-sp.o obj-$(CONFIG_ARCH_REALVIEW) += sched-clock.o obj-$(CONFIG_ARCH_VERSATILE) += sched-clock.o +ifeq ($(CONFIG_LEDS_CLASS),y) +obj-$(CONFIG_ARCH_REALVIEW) += leds.o +obj-$(CONFIG_ARCH_VERSATILE) += leds.o +endif diff --git a/arch/arm/plat-versatile/leds.c b/arch/arm/plat-versatile/leds.c new file mode 100644 index 000000000000..3169fa555ea6 --- /dev/null +++ b/arch/arm/plat-versatile/leds.c @@ -0,0 +1,103 @@ +/* + * Driver for the 8 user LEDs found on the RealViews and Versatiles + * Based on DaVinci's DM365 board code + * + * License terms: GNU General Public License (GPL) version 2 + * Author: Linus Walleij <triad@df.lth.se> + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/slab.h> +#include <linux/leds.h> + +#include <mach/hardware.h> +#include <mach/platform.h> + +#ifdef VERSATILE_SYS_BASE +#define LEDREG (__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_LED_OFFSET) +#endif + +#ifdef REALVIEW_SYS_BASE +#define LEDREG (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_LED_OFFSET) +#endif + +struct versatile_led { + struct led_classdev cdev; + u8 mask; +}; + +/* + * The triggers lines up below will only be used if the + * LED triggers are compiled in. + */ +static const struct { + const char *name; + const char *trigger; +} versatile_leds[] = { + { "versatile:0", "heartbeat", }, + { "versatile:1", "mmc0", }, + { "versatile:2", }, + { "versatile:3", }, + { "versatile:4", }, + { "versatile:5", }, + { "versatile:6", }, + { "versatile:7", }, +}; + +static void versatile_led_set(struct led_classdev *cdev, + enum led_brightness b) +{ + struct versatile_led *led = container_of(cdev, + struct versatile_led, cdev); + u32 reg = readl(LEDREG); + + if (b != LED_OFF) + reg |= led->mask; + else + reg &= ~led->mask; + writel(reg, LEDREG); +} + +static enum led_brightness versatile_led_get(struct led_classdev *cdev) +{ + struct versatile_led *led = container_of(cdev, + struct versatile_led, cdev); + u32 reg = readl(LEDREG); + + return (reg & led->mask) ? LED_FULL : LED_OFF; +} + +static int __init versatile_leds_init(void) +{ + int i; + + /* All ON */ + writel(0xff, LEDREG); + for (i = 0; i < ARRAY_SIZE(versatile_leds); i++) { + struct versatile_led *led; + + led = kzalloc(sizeof(*led), GFP_KERNEL); + if (!led) + break; + + led->cdev.name = versatile_leds[i].name; + led->cdev.brightness_set = versatile_led_set; + led->cdev.brightness_get = versatile_led_get; + led->cdev.default_trigger = versatile_leds[i].trigger; + led->mask = BIT(i); + + if (led_classdev_register(NULL, &led->cdev) < 0) { + kfree(led); + break; + } + } + + return 0; +} + +/* + * Since we may have triggers on any subsystem, defer registration + * until after subsystem_init. + */ +fs_initcall(versatile_leds_init); diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c index 315a540c7ce5..8063a322c790 100644 --- a/arch/arm/vfp/vfpmodule.c +++ b/arch/arm/vfp/vfpmodule.c @@ -15,6 +15,7 @@ #include <linux/sched.h> #include <linux/init.h> +#include <asm/cputype.h> #include <asm/thread_notify.h> #include <asm/vfp.h> @@ -549,10 +550,13 @@ static int __init vfp_init(void) /* * Check for the presence of the Advanced SIMD * load/store instructions, integer and single - * precision floating point operations. + * precision floating point operations. Only check + * for NEON if the hardware has the MVFR registers. */ - if ((fmrx(MVFR1) & 0x000fff00) == 0x00011100) - elf_hwcap |= HWCAP_NEON; + if ((read_cpuid_id() & 0x000f0000) == 0x000f0000) { + if ((fmrx(MVFR1) & 0x000fff00) == 0x00011100) + elf_hwcap |= HWCAP_NEON; + } #endif } return 0; diff --git a/drivers/amba/bus.c b/drivers/amba/bus.c index f60b2b6a0931..d31590e7011b 100644 --- a/drivers/amba/bus.c +++ b/drivers/amba/bus.c @@ -122,6 +122,31 @@ static int __init amba_init(void) postcore_initcall(amba_init); +static int amba_get_enable_pclk(struct amba_device *pcdev) +{ + struct clk *pclk = clk_get(&pcdev->dev, "apb_pclk"); + int ret; + + pcdev->pclk = pclk; + + if (IS_ERR(pclk)) + return PTR_ERR(pclk); + + ret = clk_enable(pclk); + if (ret) + clk_put(pclk); + + return ret; +} + +static void amba_put_disable_pclk(struct amba_device *pcdev) +{ + struct clk *pclk = pcdev->pclk; + + clk_disable(pclk); + clk_put(pclk); +} + /* * These are the device model conversion veneers; they convert the * device model structures to our more specific structures. @@ -130,17 +155,33 @@ static int amba_probe(struct device *dev) { struct amba_device *pcdev = to_amba_device(dev); struct amba_driver *pcdrv = to_amba_driver(dev->driver); - struct amba_id *id; + struct amba_id *id = amba_lookup(pcdrv->id_table, pcdev); + int ret; - id = amba_lookup(pcdrv->id_table, pcdev); + do { + ret = amba_get_enable_pclk(pcdev); + if (ret) + break; + + ret = pcdrv->probe(pcdev, id); + if (ret == 0) + break; - return pcdrv->probe(pcdev, id); + amba_put_disable_pclk(pcdev); + } while (0); + + return ret; } static int amba_remove(struct device *dev) { + struct amba_device *pcdev = to_amba_device(dev); struct amba_driver *drv = to_amba_driver(dev->driver); - return drv->remove(to_amba_device(dev)); + int ret = drv->remove(pcdev); + + amba_put_disable_pclk(pcdev); + + return ret; } static void amba_shutdown(struct device *dev) @@ -203,7 +244,6 @@ static void amba_device_release(struct device *dev) */ int amba_device_register(struct amba_device *dev, struct resource *parent) { - u32 pid, cid; u32 size; void __iomem *tmp; int i, ret; @@ -241,25 +281,35 @@ int amba_device_register(struct amba_device *dev, struct resource *parent) goto err_release; } - /* - * Read pid and cid based on size of resource - * they are located at end of region - */ - for (pid = 0, i = 0; i < 4; i++) - pid |= (readl(tmp + size - 0x20 + 4 * i) & 255) << (i * 8); - for (cid = 0, i = 0; i < 4; i++) - cid |= (readl(tmp + size - 0x10 + 4 * i) & 255) << (i * 8); + ret = amba_get_enable_pclk(dev); + if (ret == 0) { + u32 pid, cid; - iounmap(tmp); + /* + * Read pid and cid based on size of resource + * they are located at end of region + */ + for (pid = 0, i = 0; i < 4; i++) + pid |= (readl(tmp + size - 0x20 + 4 * i) & 255) << + (i * 8); + for (cid = 0, i = 0; i < 4; i++) + cid |= (readl(tmp + size - 0x10 + 4 * i) & 255) << + (i * 8); - if (cid == 0xb105f00d) - dev->periphid = pid; + amba_put_disable_pclk(dev); - if (!dev->periphid) { - ret = -ENODEV; - goto err_release; + if (cid == 0xb105f00d) + dev->periphid = pid; + + if (!dev->periphid) + ret = -ENODEV; } + iounmap(tmp); + + if (ret) + goto err_release; + ret = device_add(&dev->dev); if (ret) goto err_release; diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 26386a92f5aa..9b089dfb173e 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -353,6 +353,16 @@ config VMWARE_BALLOON To compile this driver as a module, choose M here: the module will be called vmware_balloon. +config ARM_CHARLCD + bool "ARM Ltd. Character LCD Driver" + depends on PLAT_VERSATILE + help + This is a driver for the character LCD found on the ARM Ltd. + Versatile and RealView Platform Baseboards. It doesn't do + very much more than display the text "ARM Linux" on the first + line and the Linux version on the second line, but that's + still useful. + source "drivers/misc/c2port/Kconfig" source "drivers/misc/eeprom/Kconfig" source "drivers/misc/cb710/Kconfig" diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index 6ed06a19474a..67552d6e9327 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -31,3 +31,4 @@ obj-$(CONFIG_IWMC3200TOP) += iwmc3200top/ obj-y += eeprom/ obj-y += cb710/ obj-$(CONFIG_VMWARE_BALLOON) += vmware_balloon.o +obj-$(CONFIG_ARM_CHARLCD) += arm-charlcd.o diff --git a/drivers/misc/arm-charlcd.c b/drivers/misc/arm-charlcd.c new file mode 100644 index 000000000000..9e3879ef58f2 --- /dev/null +++ b/drivers/misc/arm-charlcd.c @@ -0,0 +1,396 @@ +/* + * Driver for the on-board character LCD found on some ARM reference boards + * This is basically an Hitachi HD44780 LCD with a custom IP block to drive it + * http://en.wikipedia.org/wiki/HD44780_Character_LCD + * Currently it will just display the text "ARM Linux" and the linux version + * + * License terms: GNU General Public License (GPL) version 2 + * Author: Linus Walleij <triad@df.lth.se> + */ +#include <linux/init.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/completion.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/slab.h> +#include <linux/workqueue.h> +#include <generated/utsrelease.h> + +#define DRIVERNAME "arm-charlcd" +#define CHARLCD_TIMEOUT (msecs_to_jiffies(1000)) + +/* Offsets to registers */ +#define CHAR_COM 0x00U +#define CHAR_DAT 0x04U +#define CHAR_RD 0x08U +#define CHAR_RAW 0x0CU +#define CHAR_MASK 0x10U +#define CHAR_STAT 0x14U + +#define CHAR_RAW_CLEAR 0x00000000U +#define CHAR_RAW_VALID 0x00000100U + +/* Hitachi HD44780 display commands */ +#define HD_CLEAR 0x01U +#define HD_HOME 0x02U +#define HD_ENTRYMODE 0x04U +#define HD_ENTRYMODE_INCREMENT 0x02U +#define HD_ENTRYMODE_SHIFT 0x01U +#define HD_DISPCTRL 0x08U +#define HD_DISPCTRL_ON 0x04U +#define HD_DISPCTRL_CURSOR_ON 0x02U +#define HD_DISPCTRL_CURSOR_BLINK 0x01U +#define HD_CRSR_SHIFT 0x10U +#define HD_CRSR_SHIFT_DISPLAY 0x08U +#define HD_CRSR_SHIFT_DISPLAY_RIGHT 0x04U +#define HD_FUNCSET 0x20U +#define HD_FUNCSET_8BIT 0x10U +#define HD_FUNCSET_2_LINES 0x08U +#define HD_FUNCSET_FONT_5X10 0x04U +#define HD_SET_CGRAM 0x40U +#define HD_SET_DDRAM 0x80U +#define HD_BUSY_FLAG 0x80U + +/** + * @dev: a pointer back to containing device + * @phybase: the offset to the controller in physical memory + * @physize: the size of the physical page + * @virtbase: the offset to the controller in virtual memory + * @irq: reserved interrupt number + * @complete: completion structure for the last LCD command + */ +struct charlcd { + struct device *dev; + u32 phybase; + u32 physize; + void __iomem *virtbase; + int irq; + struct completion complete; + struct delayed_work init_work; +}; + +static irqreturn_t charlcd_interrupt(int irq, void *data) +{ + struct charlcd *lcd = data; + u8 status; + + status = readl(lcd->virtbase + CHAR_STAT) & 0x01; + /* Clear IRQ */ + writel(CHAR_RAW_CLEAR, lcd->virtbase + CHAR_RAW); + if (status) + complete(&lcd->complete); + else + dev_info(lcd->dev, "Spurious IRQ (%02x)\n", status); + return IRQ_HANDLED; +} + + +static void charlcd_wait_complete_irq(struct charlcd *lcd) +{ + int ret; + + ret = wait_for_completion_interruptible_timeout(&lcd->complete, + CHARLCD_TIMEOUT); + /* Disable IRQ after completion */ + writel(0x00, lcd->virtbase + CHAR_MASK); + + if (ret < 0) { + dev_err(lcd->dev, + "wait_for_completion_interruptible_timeout() " + "returned %d waiting for ready\n", ret); + return; + } + + if (ret == 0) { + dev_err(lcd->dev, "charlcd controller timed out " + "waiting for ready\n"); + return; + } +} + +static u8 charlcd_4bit_read_char(struct charlcd *lcd) +{ + u8 data; + u32 val; + int i; + + /* If we can, use an IRQ to wait for the data, else poll */ + if (lcd->irq >= 0) + charlcd_wait_complete_irq(lcd); + else { + i = 0; + val = 0; + while (!(val & CHAR_RAW_VALID) && i < 10) { + udelay(100); + val = readl(lcd->virtbase + CHAR_RAW); + i++; + } + + writel(CHAR_RAW_CLEAR, lcd->virtbase + CHAR_RAW); + } + msleep(1); + + /* Read the 4 high bits of the data */ + data = readl(lcd->virtbase + CHAR_RD) & 0xf0; + + /* + * The second read for the low bits does not trigger an IRQ + * so in this case we have to poll for the 4 lower bits + */ + i = 0; + val = 0; + while (!(val & CHAR_RAW_VALID) && i < 10) { + udelay(100); + val = readl(lcd->virtbase + CHAR_RAW); + i++; + } + writel(CHAR_RAW_CLEAR, lcd->virtbase + CHAR_RAW); + msleep(1); + + /* Read the 4 low bits of the data */ + data |= (readl(lcd->virtbase + CHAR_RD) >> 4) & 0x0f; + + return data; +} + +static bool charlcd_4bit_read_bf(struct charlcd *lcd) +{ + if (lcd->irq >= 0) { + /* + * If we'll use IRQs to wait for the busyflag, clear any + * pending flag and enable IRQ + */ + writel(CHAR_RAW_CLEAR, lcd->virtbase + CHAR_RAW); + init_completion(&lcd->complete); + writel(0x01, lcd->virtbase + CHAR_MASK); + } + readl(lcd->virtbase + CHAR_COM); + return charlcd_4bit_read_char(lcd) & HD_BUSY_FLAG ? true : false; +} + +static void charlcd_4bit_wait_busy(struct charlcd *lcd) +{ + int retries = 50; + + udelay(100); + while (charlcd_4bit_read_bf(lcd) && retries) + retries--; + if (!retries) + dev_err(lcd->dev, "timeout waiting for busyflag\n"); +} + +static void charlcd_4bit_command(struct charlcd *lcd, u8 cmd) +{ + u32 cmdlo = (cmd << 4) & 0xf0; + u32 cmdhi = (cmd & 0xf0); + + writel(cmdhi, lcd->virtbase + CHAR_COM); + udelay(10); + writel(cmdlo, lcd->virtbase + CHAR_COM); + charlcd_4bit_wait_busy(lcd); +} + +static void charlcd_4bit_char(struct charlcd *lcd, u8 ch) +{ + u32 chlo = (ch << 4) & 0xf0; + u32 chhi = (ch & 0xf0); + + writel(chhi, lcd->virtbase + CHAR_DAT); + udelay(10); + writel(chlo, lcd->virtbase + CHAR_DAT); + charlcd_4bit_wait_busy(lcd); +} + +static void charlcd_4bit_print(struct charlcd *lcd, int line, const char *str) +{ + u8 offset; + int i; + + /* + * We support line 0, 1 + * Line 1 runs from 0x00..0x27 + * Line 2 runs from 0x28..0x4f + */ + if (line == 0) + offset = 0; + else if (line == 1) + offset = 0x28; + else + return; + + /* Set offset */ + charlcd_4bit_command(lcd, HD_SET_DDRAM | offset); + + /* Send string */ + for (i = 0; i < strlen(str) && i < 0x28; i++) + charlcd_4bit_char(lcd, str[i]); +} + +static void charlcd_4bit_init(struct charlcd *lcd) +{ + /* These commands cannot be checked with the busy flag */ + writel(HD_FUNCSET | HD_FUNCSET_8BIT, lcd->virtbase + CHAR_COM); + msleep(5); + writel(HD_FUNCSET | HD_FUNCSET_8BIT, lcd->virtbase + CHAR_COM); + udelay(100); + writel(HD_FUNCSET | HD_FUNCSET_8BIT, lcd->virtbase + CHAR_COM); + udelay(100); + /* Go to 4bit mode */ + writel(HD_FUNCSET, lcd->virtbase + CHAR_COM); + udelay(100); + /* + * 4bit mode, 2 lines, 5x8 font, after this the number of lines + * and the font cannot be changed until the next initialization sequence + */ + charlcd_4bit_command(lcd, HD_FUNCSET | HD_FUNCSET_2_LINES); + charlcd_4bit_command(lcd, HD_DISPCTRL | HD_DISPCTRL_ON); + charlcd_4bit_command(lcd, HD_ENTRYMODE | HD_ENTRYMODE_INCREMENT); + charlcd_4bit_command(lcd, HD_CLEAR); + charlcd_4bit_command(lcd, HD_HOME); + /* Put something useful in the display */ + charlcd_4bit_print(lcd, 0, "ARM Linux"); + charlcd_4bit_print(lcd, 1, UTS_RELEASE); +} + +static void charlcd_init_work(struct work_struct *work) +{ + struct charlcd *lcd = + container_of(work, struct charlcd, init_work.work); + + charlcd_4bit_init(lcd); +} + +static int __init charlcd_probe(struct platform_device *pdev) +{ + int ret; + struct charlcd *lcd; + struct resource *res; + + lcd = kzalloc(sizeof(struct charlcd), GFP_KERNEL); + if (!lcd) + return -ENOMEM; + + lcd->dev = &pdev->dev; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + ret = -ENOENT; + goto out_no_resource; + } + lcd->phybase = res->start; + lcd->physize = resource_size(res); + + if (request_mem_region(lcd->phybase, lcd->physize, + DRIVERNAME) == NULL) { + ret = -EBUSY; + goto out_no_memregion; + } + + lcd->virtbase = ioremap(lcd->phybase, lcd->physize); + if (!lcd->virtbase) { + ret = -ENOMEM; + goto out_no_remap; + } + + lcd->irq = platform_get_irq(pdev, 0); + /* If no IRQ is supplied, we'll survive without it */ + if (lcd->irq >= 0) { + if (request_irq(lcd->irq, charlcd_interrupt, IRQF_DISABLED, + DRIVERNAME, lcd)) { + ret = -EIO; + goto out_no_irq; + } + } + + platform_set_drvdata(pdev, lcd); + + /* + * Initialize the display in a delayed work, because + * it is VERY slow and would slow down the boot of the system. + */ + INIT_DELAYED_WORK(&lcd->init_work, charlcd_init_work); + schedule_delayed_work(&lcd->init_work, 0); + + dev_info(&pdev->dev, "initalized ARM character LCD at %08x\n", + lcd->phybase); + + return 0; + +out_no_irq: + iounmap(lcd->virtbase); +out_no_remap: + platform_set_drvdata(pdev, NULL); +out_no_memregion: + release_mem_region(lcd->phybase, SZ_4K); +out_no_resource: + kfree(lcd); + return ret; +} + +static int __exit charlcd_remove(struct platform_device *pdev) +{ + struct charlcd *lcd = platform_get_drvdata(pdev); + + if (lcd) { + free_irq(lcd->irq, lcd); + iounmap(lcd->virtbase); + release_mem_region(lcd->phybase, lcd->physize); + platform_set_drvdata(pdev, NULL); + kfree(lcd); + } + + return 0; +} + +static int charlcd_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct charlcd *lcd = platform_get_drvdata(pdev); + + /* Power the display off */ + charlcd_4bit_command(lcd, HD_DISPCTRL); + return 0; +} + +static int charlcd_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct charlcd *lcd = platform_get_drvdata(pdev); + + /* Turn the display back on */ + charlcd_4bit_command(lcd, HD_DISPCTRL | HD_DISPCTRL_ON); + return 0; +} + +static const struct dev_pm_ops charlcd_pm_ops = { + .suspend = charlcd_suspend, + .resume = charlcd_resume, +}; + +static struct platform_driver charlcd_driver = { + .driver = { + .name = DRIVERNAME, + .owner = THIS_MODULE, + .pm = &charlcd_pm_ops, + }, + .remove = __exit_p(charlcd_remove), +}; + +static int __init charlcd_init(void) +{ + return platform_driver_probe(&charlcd_driver, charlcd_probe); +} + +static void __exit charlcd_exit(void) +{ + platform_driver_unregister(&charlcd_driver); +} + +module_init(charlcd_init); +module_exit(charlcd_exit); + +MODULE_AUTHOR("Linus Walleij <triad@df.lth.se>"); +MODULE_DESCRIPTION("ARM Character LCD Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c index eaa79c8a9b8c..93ead19507b6 100644 --- a/drivers/usb/gadget/at91_udc.c +++ b/drivers/usb/gadget/at91_udc.c @@ -76,11 +76,12 @@ static const char driver_name [] = "at91_udc"; static const char ep0name[] = "ep0"; +#define VBUS_POLL_TIMEOUT msecs_to_jiffies(1000) -#define at91_udp_read(dev, reg) \ - __raw_readl((dev)->udp_baseaddr + (reg)) -#define at91_udp_write(dev, reg, val) \ - __raw_writel((val), (dev)->udp_baseaddr + (reg)) +#define at91_udp_read(udc, reg) \ + __raw_readl((udc)->udp_baseaddr + (reg)) +#define at91_udp_write(udc, reg, val) \ + __raw_writel((val), (udc)->udp_baseaddr + (reg)) /*-------------------------------------------------------------------------*/ @@ -102,8 +103,9 @@ static void proc_ep_show(struct seq_file *s, struct at91_ep *ep) u32 csr; struct at91_request *req; unsigned long flags; + struct at91_udc *udc = ep->udc; - local_irq_save(flags); + spin_lock_irqsave(&udc->lock, flags); csr = __raw_readl(ep->creg); @@ -147,7 +149,7 @@ static void proc_ep_show(struct seq_file *s, struct at91_ep *ep) &req->req, length, req->req.length, req->req.buf); } - local_irq_restore(flags); + spin_unlock_irqrestore(&udc->lock, flags); } static void proc_irq_show(struct seq_file *s, const char *label, u32 mask) @@ -272,7 +274,9 @@ static void done(struct at91_ep *ep, struct at91_request *req, int status) VDBG("%s done %p, status %d\n", ep->ep.name, req, status); ep->stopped = 1; + spin_unlock(&udc->lock); req->req.complete(&ep->ep, &req->req); + spin_lock(&udc->lock); ep->stopped = stopped; /* ep0 is always ready; other endpoints need a non-empty queue */ @@ -472,7 +476,7 @@ static int at91_ep_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc) { struct at91_ep *ep = container_of(_ep, struct at91_ep, ep); - struct at91_udc *dev = ep->udc; + struct at91_udc *udc = ep->udc; u16 maxpacket; u32 tmp; unsigned long flags; @@ -487,7 +491,7 @@ static int at91_ep_enable(struct usb_ep *_ep, return -EINVAL; } - if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN) { + if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN) { DBG("bogus device state\n"); return -ESHUTDOWN; } @@ -521,7 +525,7 @@ bogus_max: } ok: - local_irq_save(flags); + spin_lock_irqsave(&udc->lock, flags); /* initialize endpoint to match this descriptor */ ep->is_in = usb_endpoint_dir_in(desc); @@ -540,10 +544,10 @@ ok: * reset/init endpoint fifo. NOTE: leaves fifo_bank alone, * since endpoint resets don't reset hw pingpong state. */ - at91_udp_write(dev, AT91_UDP_RST_EP, ep->int_mask); - at91_udp_write(dev, AT91_UDP_RST_EP, 0); + at91_udp_write(udc, AT91_UDP_RST_EP, ep->int_mask); + at91_udp_write(udc, AT91_UDP_RST_EP, 0); - local_irq_restore(flags); + spin_unlock_irqrestore(&udc->lock, flags); return 0; } @@ -556,7 +560,7 @@ static int at91_ep_disable (struct usb_ep * _ep) if (ep == &ep->udc->ep[0]) return -EINVAL; - local_irq_save(flags); + spin_lock_irqsave(&udc->lock, flags); nuke(ep, -ESHUTDOWN); @@ -571,7 +575,7 @@ static int at91_ep_disable (struct usb_ep * _ep) __raw_writel(0, ep->creg); } - local_irq_restore(flags); + spin_unlock_irqrestore(&udc->lock, flags); return 0; } @@ -607,7 +611,7 @@ static int at91_ep_queue(struct usb_ep *_ep, { struct at91_request *req; struct at91_ep *ep; - struct at91_udc *dev; + struct at91_udc *udc; int status; unsigned long flags; @@ -625,9 +629,9 @@ static int at91_ep_queue(struct usb_ep *_ep, return -EINVAL; } - dev = ep->udc; + udc = ep->udc; - if (!dev || !dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN) { + if (!udc || !udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN) { DBG("invalid device\n"); return -EINVAL; } @@ -635,7 +639,7 @@ static int at91_ep_queue(struct usb_ep *_ep, _req->status = -EINPROGRESS; _req->actual = 0; - local_irq_save(flags); + spin_lock_irqsave(&udc->lock, flags); /* try to kickstart any empty and idle queue */ if (list_empty(&ep->queue) && !ep->stopped) { @@ -653,7 +657,7 @@ static int at91_ep_queue(struct usb_ep *_ep, if (is_ep0) { u32 tmp; - if (!dev->req_pending) { + if (!udc->req_pending) { status = -EINVAL; goto done; } @@ -662,11 +666,11 @@ static int at91_ep_queue(struct usb_ep *_ep, * defer changing CONFG until after the gadget driver * reconfigures the endpoints. */ - if (dev->wait_for_config_ack) { - tmp = at91_udp_read(dev, AT91_UDP_GLB_STAT); + if (udc->wait_for_config_ack) { + tmp = at91_udp_read(udc, AT91_UDP_GLB_STAT); tmp ^= AT91_UDP_CONFG; VDBG("toggle config\n"); - at91_udp_write(dev, AT91_UDP_GLB_STAT, tmp); + at91_udp_write(udc, AT91_UDP_GLB_STAT, tmp); } if (req->req.length == 0) { ep0_in_status: @@ -676,7 +680,7 @@ ep0_in_status: tmp &= ~SET_FX; tmp |= CLR_FX | AT91_UDP_TXPKTRDY; __raw_writel(tmp, ep->creg); - dev->req_pending = 0; + udc->req_pending = 0; goto done; } } @@ -695,31 +699,40 @@ ep0_in_status: if (req && !status) { list_add_tail (&req->queue, &ep->queue); - at91_udp_write(dev, AT91_UDP_IER, ep->int_mask); + at91_udp_write(udc, AT91_UDP_IER, ep->int_mask); } done: - local_irq_restore(flags); + spin_unlock_irqrestore(&udc->lock, flags); return (status < 0) ? status : 0; } static int at91_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req) { - struct at91_ep *ep; + struct at91_ep *ep; struct at91_request *req; + unsigned long flags; + struct at91_udc *udc; ep = container_of(_ep, struct at91_ep, ep); if (!_ep || ep->ep.name == ep0name) return -EINVAL; + udc = ep->udc; + + spin_lock_irqsave(&udc->lock, flags); + /* make sure it's actually queued on this endpoint */ list_for_each_entry (req, &ep->queue, queue) { if (&req->req == _req) break; } - if (&req->req != _req) + if (&req->req != _req) { + spin_unlock_irqrestore(&udc->lock, flags); return -EINVAL; + } done(ep, req, -ECONNRESET); + spin_unlock_irqrestore(&udc->lock, flags); return 0; } @@ -736,7 +749,7 @@ static int at91_ep_set_halt(struct usb_ep *_ep, int value) return -EINVAL; creg = ep->creg; - local_irq_save(flags); + spin_lock_irqsave(&udc->lock, flags); csr = __raw_readl(creg); @@ -761,7 +774,7 @@ static int at91_ep_set_halt(struct usb_ep *_ep, int value) __raw_writel(csr, creg); } - local_irq_restore(flags); + spin_unlock_irqrestore(&udc->lock, flags); return status; } @@ -795,7 +808,7 @@ static int at91_wakeup(struct usb_gadget *gadget) unsigned long flags; DBG("%s\n", __func__ ); - local_irq_save(flags); + spin_lock_irqsave(&udc->lock, flags); if (!udc->clocked || !udc->suspended) goto done; @@ -809,7 +822,7 @@ static int at91_wakeup(struct usb_gadget *gadget) at91_udp_write(udc, AT91_UDP_GLB_STAT, glbstate); done: - local_irq_restore(flags); + spin_unlock_irqrestore(&udc->lock, flags); return status; } @@ -851,8 +864,11 @@ static void stop_activity(struct at91_udc *udc) ep->stopped = 1; nuke(ep, -ESHUTDOWN); } - if (driver) + if (driver) { + spin_unlock(&udc->lock); driver->disconnect(&udc->gadget); + spin_lock(&udc->lock); + } udc_reinit(udc); } @@ -935,13 +951,13 @@ static int at91_vbus_session(struct usb_gadget *gadget, int is_active) unsigned long flags; // VDBG("vbus %s\n", is_active ? "on" : "off"); - local_irq_save(flags); + spin_lock_irqsave(&udc->lock, flags); udc->vbus = (is_active != 0); if (udc->driver) pullup(udc, is_active); else pullup(udc, 0); - local_irq_restore(flags); + spin_unlock_irqrestore(&udc->lock, flags); return 0; } @@ -950,10 +966,10 @@ static int at91_pullup(struct usb_gadget *gadget, int is_on) struct at91_udc *udc = to_udc(gadget); unsigned long flags; - local_irq_save(flags); + spin_lock_irqsave(&udc->lock, flags); udc->enabled = is_on = !!is_on; pullup(udc, is_on); - local_irq_restore(flags); + spin_unlock_irqrestore(&udc->lock, flags); return 0; } @@ -962,9 +978,9 @@ static int at91_set_selfpowered(struct usb_gadget *gadget, int is_on) struct at91_udc *udc = to_udc(gadget); unsigned long flags; - local_irq_save(flags); + spin_lock_irqsave(&udc->lock, flags); udc->selfpowered = (is_on != 0); - local_irq_restore(flags); + spin_unlock_irqrestore(&udc->lock, flags); return 0; } @@ -1226,8 +1242,11 @@ static void handle_setup(struct at91_udc *udc, struct at91_ep *ep, u32 csr) #undef w_length /* pass request up to the gadget driver */ - if (udc->driver) + if (udc->driver) { + spin_unlock(&udc->lock); status = udc->driver->setup(&udc->gadget, &pkt.r); + spin_lock(&udc->lock); + } else status = -ENODEV; if (status < 0) { @@ -1378,6 +1397,9 @@ static irqreturn_t at91_udc_irq (int irq, void *_udc) struct at91_udc *udc = _udc; u32 rescans = 5; int disable_clock = 0; + unsigned long flags; + + spin_lock_irqsave(&udc->lock, flags); if (!udc->clocked) { clk_on(udc); @@ -1433,8 +1455,11 @@ static irqreturn_t at91_udc_irq (int irq, void *_udc) * and then into standby to avoid drawing more than * 500uA power (2500uA for some high-power configs). */ - if (udc->driver && udc->driver->suspend) + if (udc->driver && udc->driver->suspend) { + spin_unlock(&udc->lock); udc->driver->suspend(&udc->gadget); + spin_lock(&udc->lock); + } /* host initiated resume */ } else if (status & AT91_UDP_RXRSM) { @@ -1451,8 +1476,11 @@ static irqreturn_t at91_udc_irq (int irq, void *_udc) * would normally want to switch out of slow clock * mode into normal mode. */ - if (udc->driver && udc->driver->resume) + if (udc->driver && udc->driver->resume) { + spin_unlock(&udc->lock); udc->driver->resume(&udc->gadget); + spin_lock(&udc->lock); + } /* endpoint IRQs are cleared by handling them */ } else { @@ -1474,6 +1502,8 @@ static irqreturn_t at91_udc_irq (int irq, void *_udc) if (disable_clock) clk_off(udc); + spin_unlock_irqrestore(&udc->lock, flags); + return IRQ_HANDLED; } @@ -1556,24 +1586,53 @@ static struct at91_udc controller = { /* ep6 and ep7 are also reserved (custom silicon might use them) */ }; +static void at91_vbus_update(struct at91_udc *udc, unsigned value) +{ + value ^= udc->board.vbus_active_low; + if (value != udc->vbus) + at91_vbus_session(&udc->gadget, value); +} + static irqreturn_t at91_vbus_irq(int irq, void *_udc) { struct at91_udc *udc = _udc; - unsigned value; /* vbus needs at least brief debouncing */ udelay(10); - value = gpio_get_value(udc->board.vbus_pin); - if (value != udc->vbus) - at91_vbus_session(&udc->gadget, value); + at91_vbus_update(udc, gpio_get_value(udc->board.vbus_pin)); return IRQ_HANDLED; } +static void at91_vbus_timer_work(struct work_struct *work) +{ + struct at91_udc *udc = container_of(work, struct at91_udc, + vbus_timer_work); + + at91_vbus_update(udc, gpio_get_value_cansleep(udc->board.vbus_pin)); + + if (!timer_pending(&udc->vbus_timer)) + mod_timer(&udc->vbus_timer, jiffies + VBUS_POLL_TIMEOUT); +} + +static void at91_vbus_timer(unsigned long data) +{ + struct at91_udc *udc = (struct at91_udc *)data; + + /* + * If we are polling vbus it is likely that the gpio is on an + * bus such as i2c or spi which may sleep, so schedule some work + * to read the vbus gpio + */ + if (!work_pending(&udc->vbus_timer_work)) + schedule_work(&udc->vbus_timer_work); +} + int usb_gadget_register_driver (struct usb_gadget_driver *driver) { struct at91_udc *udc = &controller; int retval; + unsigned long flags; if (!driver || driver->speed < USB_SPEED_FULL @@ -1605,9 +1664,9 @@ int usb_gadget_register_driver (struct usb_gadget_driver *driver) return retval; } - local_irq_disable(); + spin_lock_irqsave(&udc->lock, flags); pullup(udc, 1); - local_irq_enable(); + spin_unlock_irqrestore(&udc->lock, flags); DBG("bound to %s\n", driver->driver.name); return 0; @@ -1617,15 +1676,16 @@ EXPORT_SYMBOL (usb_gadget_register_driver); int usb_gadget_unregister_driver (struct usb_gadget_driver *driver) { struct at91_udc *udc = &controller; + unsigned long flags; if (!driver || driver != udc->driver || !driver->unbind) return -EINVAL; - local_irq_disable(); + spin_lock_irqsave(&udc->lock, flags); udc->enabled = 0; at91_udp_write(udc, AT91_UDP_IDR, ~0); pullup(udc, 0); - local_irq_enable(); + spin_unlock_irqrestore(&udc->lock, flags); driver->unbind(&udc->gadget); udc->gadget.dev.driver = NULL; @@ -1641,8 +1701,13 @@ EXPORT_SYMBOL (usb_gadget_unregister_driver); static void at91udc_shutdown(struct platform_device *dev) { + struct at91_udc *udc = platform_get_drvdata(dev); + unsigned long flags; + /* force disconnect on reboot */ + spin_lock_irqsave(&udc->lock, flags); pullup(platform_get_drvdata(dev), 0); + spin_unlock_irqrestore(&udc->lock, flags); } static int __init at91udc_probe(struct platform_device *pdev) @@ -1683,6 +1748,7 @@ static int __init at91udc_probe(struct platform_device *pdev) udc->board = *(struct at91_udc_data *) dev->platform_data; udc->pdev = pdev; udc->enabled = 0; + spin_lock_init(&udc->lock); /* rm9200 needs manual D+ pullup; off by default */ if (cpu_is_at91rm9200()) { @@ -1763,13 +1829,23 @@ static int __init at91udc_probe(struct platform_device *pdev) * Get the initial state of VBUS - we cannot expect * a pending interrupt. */ - udc->vbus = gpio_get_value(udc->board.vbus_pin); - if (request_irq(udc->board.vbus_pin, at91_vbus_irq, - IRQF_DISABLED, driver_name, udc)) { - DBG("request vbus irq %d failed\n", - udc->board.vbus_pin); - retval = -EBUSY; - goto fail3; + udc->vbus = gpio_get_value_cansleep(udc->board.vbus_pin) ^ + udc->board.vbus_active_low; + + if (udc->board.vbus_polled) { + INIT_WORK(&udc->vbus_timer_work, at91_vbus_timer_work); + setup_timer(&udc->vbus_timer, at91_vbus_timer, + (unsigned long)udc); + mod_timer(&udc->vbus_timer, + jiffies + VBUS_POLL_TIMEOUT); + } else { + if (request_irq(udc->board.vbus_pin, at91_vbus_irq, + IRQF_DISABLED, driver_name, udc)) { + DBG("request vbus irq %d failed\n", + udc->board.vbus_pin); + retval = -EBUSY; + goto fail3; + } } } else { DBG("no VBUS detection, assuming always-on\n"); @@ -1804,13 +1880,16 @@ static int __exit at91udc_remove(struct platform_device *pdev) { struct at91_udc *udc = platform_get_drvdata(pdev); struct resource *res; + unsigned long flags; DBG("remove\n"); if (udc->driver) return -EBUSY; + spin_lock_irqsave(&udc->lock, flags); pullup(udc, 0); + spin_unlock_irqrestore(&udc->lock, flags); device_init_wakeup(&pdev->dev, 0); remove_debug_file(udc); @@ -1840,6 +1919,7 @@ static int at91udc_suspend(struct platform_device *pdev, pm_message_t mesg) { struct at91_udc *udc = platform_get_drvdata(pdev); int wake = udc->driver && device_may_wakeup(&pdev->dev); + unsigned long flags; /* Unless we can act normally to the host (letting it wake us up * whenever it has work for us) force disconnect. Wakeup requires @@ -1849,13 +1929,15 @@ static int at91udc_suspend(struct platform_device *pdev, pm_message_t mesg) if ((!udc->suspended && udc->addr) || !wake || at91_suspend_entering_slow_clock()) { + spin_lock_irqsave(&udc->lock, flags); pullup(udc, 0); wake = 0; + spin_unlock_irqrestore(&udc->lock, flags); } else enable_irq_wake(udc->udp_irq); udc->active_suspend = wake; - if (udc->board.vbus_pin > 0 && wake) + if (udc->board.vbus_pin > 0 && !udc->board.vbus_polled && wake) enable_irq_wake(udc->board.vbus_pin); return 0; } @@ -1863,15 +1945,20 @@ static int at91udc_suspend(struct platform_device *pdev, pm_message_t mesg) static int at91udc_resume(struct platform_device *pdev) { struct at91_udc *udc = platform_get_drvdata(pdev); + unsigned long flags; - if (udc->board.vbus_pin > 0 && udc->active_suspend) + if (udc->board.vbus_pin > 0 && !udc->board.vbus_polled && + udc->active_suspend) disable_irq_wake(udc->board.vbus_pin); /* maybe reconnect to host; if so, clocks on */ if (udc->active_suspend) disable_irq_wake(udc->udp_irq); - else + else { + spin_lock_irqsave(&udc->lock, flags); pullup(udc, 1); + spin_unlock_irqrestore(&udc->lock, flags); + } return 0; } #else diff --git a/drivers/usb/gadget/at91_udc.h b/drivers/usb/gadget/at91_udc.h index c65d62295890..108ca54f9092 100644 --- a/drivers/usb/gadget/at91_udc.h +++ b/drivers/usb/gadget/at91_udc.h @@ -144,6 +144,9 @@ struct at91_udc { struct proc_dir_entry *pde; void __iomem *udp_baseaddr; int udp_irq; + spinlock_t lock; + struct timer_list vbus_timer; + struct work_struct vbus_timer_work; }; static inline struct at91_udc *to_udc(struct usb_gadget *g) diff --git a/drivers/video/omap2/vram.c b/drivers/video/omap2/vram.c index 3b1237ad85ed..f6fdc2085f3e 100644 --- a/drivers/video/omap2/vram.c +++ b/drivers/video/omap2/vram.c @@ -25,7 +25,7 @@ #include <linux/list.h> #include <linux/slab.h> #include <linux/seq_file.h> -#include <linux/bootmem.h> +#include <linux/memblock.h> #include <linux/completion.h> #include <linux/debugfs.h> #include <linux/jiffies.h> @@ -525,10 +525,8 @@ early_param("vram", omap_vram_early_vram); * Called from map_io. We need to call to this early enough so that we * can reserve the fixed SDRAM regions before VM could get hold of them. */ -void __init omap_vram_reserve_sdram(void) +void __init omap_vram_reserve_sdram_memblock(void) { - struct bootmem_data *bdata; - unsigned long sdram_start, sdram_size; u32 paddr; u32 size = 0; @@ -555,29 +553,28 @@ void __init omap_vram_reserve_sdram(void) size = PAGE_ALIGN(size); - bdata = NODE_DATA(0)->bdata; - sdram_start = bdata->node_min_pfn << PAGE_SHIFT; - sdram_size = (bdata->node_low_pfn << PAGE_SHIFT) - sdram_start; - if (paddr) { - if ((paddr & ~PAGE_MASK) || paddr < sdram_start || - paddr + size > sdram_start + sdram_size) { + struct memblock_property res; + + res.base = paddr; + res.size = size; + if ((paddr & ~PAGE_MASK) || memblock_find(&res) || + res.base != paddr || res.size != size) { pr_err("Illegal SDRAM region for VRAM\n"); return; } - if (reserve_bootmem(paddr, size, BOOTMEM_EXCLUSIVE) < 0) { - pr_err("FB: failed to reserve VRAM\n"); + if (memblock_is_region_reserved(paddr, size)) { + pr_err("FB: failed to reserve VRAM - busy\n"); return; } - } else { - if (size > sdram_size) { - pr_err("Illegal SDRAM size for VRAM\n"); + + if (memblock_reserve(paddr, size) < 0) { + pr_err("FB: failed to reserve VRAM - no memory\n"); return; } - - paddr = virt_to_phys(alloc_bootmem_pages(size)); - BUG_ON(paddr & ~PAGE_MASK); + } else { + paddr = memblock_alloc_base(size, PAGE_SIZE, MEMBLOCK_REAL_LIMIT); } omap_vram_add_region(paddr, size); diff --git a/include/linux/amba/bus.h b/include/linux/amba/bus.h index 8b1038607831..b0c174012436 100644 --- a/include/linux/amba/bus.h +++ b/include/linux/amba/bus.h @@ -14,14 +14,19 @@ #ifndef ASMARM_AMBA_H #define ASMARM_AMBA_H +#include <linux/clk.h> #include <linux/device.h> +#include <linux/err.h> #include <linux/resource.h> #define AMBA_NR_IRQS 2 +struct clk; + struct amba_device { struct device dev; struct resource res; + struct clk *pclk; u64 dma_mask; unsigned int periphid; unsigned int irq[AMBA_NR_IRQS]; @@ -59,6 +64,12 @@ struct amba_device *amba_find_device(const char *, struct device *, unsigned int int amba_request_regions(struct amba_device *, const char *); void amba_release_regions(struct amba_device *); +#define amba_pclk_enable(d) \ + (IS_ERR((d)->pclk) ? 0 : clk_enable((d)->pclk)) + +#define amba_pclk_disable(d) \ + do { if (!IS_ERR((d)->pclk)) clk_disable((d)->pclk); } while (0) + #define amba_config(d) (((d)->periphid >> 24) & 0xff) #define amba_rev(d) (((d)->periphid >> 20) & 0x0f) #define amba_manf(d) (((d)->periphid >> 12) & 0xff) diff --git a/include/linux/omapfb.h b/include/linux/omapfb.h index 9bdd91486b49..7e4cd616bcb5 100644 --- a/include/linux/omapfb.h +++ b/include/linux/omapfb.h @@ -253,7 +253,7 @@ struct omapfb_platform_data { /* in arch/arm/plat-omap/fb.c */ extern void omapfb_set_platform_data(struct omapfb_platform_data *data); extern void omapfb_set_ctrl_platform_data(void *pdata); -extern void omapfb_reserve_sdram(void); +extern void omapfb_reserve_sdram_memblock(void); #endif diff --git a/tools/perf/arch/arm/Makefile b/tools/perf/arch/arm/Makefile new file mode 100644 index 000000000000..15130b50dfe3 --- /dev/null +++ b/tools/perf/arch/arm/Makefile @@ -0,0 +1,4 @@ +ifndef NO_DWARF +PERF_HAVE_DWARF_REGS := 1 +LIB_OBJS += $(OUTPUT)arch/$(ARCH)/util/dwarf-regs.o +endif diff --git a/tools/perf/arch/arm/util/dwarf-regs.c b/tools/perf/arch/arm/util/dwarf-regs.c new file mode 100644 index 000000000000..fff6450c8c99 --- /dev/null +++ b/tools/perf/arch/arm/util/dwarf-regs.c @@ -0,0 +1,64 @@ +/* + * Mapping of DWARF debug register numbers into register names. + * + * Copyright (C) 2010 Will Deacon, ARM Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <libio.h> +#include <dwarf-regs.h> + +struct pt_regs_dwarfnum { + const char *name; + unsigned int dwarfnum; +}; + +#define STR(s) #s +#define REG_DWARFNUM_NAME(r, num) {.name = r, .dwarfnum = num} +#define GPR_DWARFNUM_NAME(num) \ + {.name = STR(%r##num), .dwarfnum = num} +#define REG_DWARFNUM_END {.name = NULL, .dwarfnum = 0} + +/* + * Reference: + * http://infocenter.arm.com/help/topic/com.arm.doc.ihi0040a/IHI0040A_aadwarf.pdf + */ +static const struct pt_regs_dwarfnum regdwarfnum_table[] = { + GPR_DWARFNUM_NAME(0), + GPR_DWARFNUM_NAME(1), + GPR_DWARFNUM_NAME(2), + GPR_DWARFNUM_NAME(3), + GPR_DWARFNUM_NAME(4), + GPR_DWARFNUM_NAME(5), + GPR_DWARFNUM_NAME(6), + GPR_DWARFNUM_NAME(7), + GPR_DWARFNUM_NAME(8), + GPR_DWARFNUM_NAME(9), + GPR_DWARFNUM_NAME(10), + REG_DWARFNUM_NAME("%fp", 11), + REG_DWARFNUM_NAME("%ip", 12), + REG_DWARFNUM_NAME("%sp", 13), + REG_DWARFNUM_NAME("%lr", 14), + REG_DWARFNUM_NAME("%pc", 15), + REG_DWARFNUM_END, +}; + +/** + * get_arch_regstr() - lookup register name from it's DWARF register number + * @n: the DWARF register number + * + * get_arch_regstr() returns the name of the register in struct + * regdwarfnum_table from it's DWARF register number. If the register is not + * found in the table, this returns NULL; + */ +const char *get_arch_regstr(unsigned int n) +{ + const struct pt_regs_dwarfnum *roff; + for (roff = regdwarfnum_table; roff->name != NULL; roff++) + if (roff->dwarfnum == n) + return roff->name; + return NULL; +} |