diff options
| -rw-r--r-- | Documentation/devicetree/bindings/display/multi-inno,mi0283qt.txt | 27 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/display/panel/panel.txt | 4 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/vendor-prefixes.txt | 1 | ||||
| -rw-r--r-- | Documentation/gpu/index.rst | 1 | ||||
| -rw-r--r-- | Documentation/gpu/tinydrm.rst | 42 | ||||
| -rw-r--r-- | MAINTAINERS | 6 | ||||
| -rw-r--r-- | drivers/gpu/drm/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/gpu/drm/Makefile | 1 | ||||
| -rw-r--r-- | drivers/gpu/drm/tinydrm/Kconfig | 21 | ||||
| -rw-r--r-- | drivers/gpu/drm/tinydrm/Makefile | 7 | ||||
| -rw-r--r-- | drivers/gpu/drm/tinydrm/core/Makefile | 3 | ||||
| -rw-r--r-- | drivers/gpu/drm/tinydrm/core/tinydrm-core.c | 376 | ||||
| -rw-r--r-- | drivers/gpu/drm/tinydrm/core/tinydrm-helpers.c | 460 | ||||
| -rw-r--r-- | drivers/gpu/drm/tinydrm/core/tinydrm-pipe.c | 234 | ||||
| -rw-r--r-- | drivers/gpu/drm/tinydrm/mi0283qt.c | 279 | ||||
| -rw-r--r-- | drivers/gpu/drm/tinydrm/mipi-dbi.c | 1005 | ||||
| -rw-r--r-- | include/drm/tinydrm/ili9341.h | 54 | ||||
| -rw-r--r-- | include/drm/tinydrm/mipi-dbi.h | 107 | ||||
| -rw-r--r-- | include/drm/tinydrm/tinydrm-helpers.h | 100 | ||||
| -rw-r--r-- | include/drm/tinydrm/tinydrm.h | 115 |
20 files changed, 2845 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/display/multi-inno,mi0283qt.txt b/Documentation/devicetree/bindings/display/multi-inno,mi0283qt.txt new file mode 100644 index 000000000000..eed48c3d4875 --- /dev/null +++ b/Documentation/devicetree/bindings/display/multi-inno,mi0283qt.txt @@ -0,0 +1,27 @@ +Multi-Inno MI0283QT display panel + +Required properties: +- compatible: "multi-inno,mi0283qt". + +The node for this driver must be a child node of a SPI controller, hence +all mandatory properties described in ../spi/spi-bus.txt must be specified. + +Optional properties: +- dc-gpios: D/C pin. The presence/absence of this GPIO determines + the panel interface mode (IM[3:0] pins): + - present: IM=x110 4-wire 8-bit data serial interface + - absent: IM=x101 3-wire 9-bit data serial interface +- reset-gpios: Reset pin +- power-supply: A regulator node for the supply voltage. +- backlight: phandle of the backlight device attached to the panel +- rotation: panel rotation in degrees counter clockwise (0,90,180,270) + +Example: + mi0283qt@0{ + compatible = "multi-inno,mi0283qt"; + reg = <0>; + spi-max-frequency = <32000000>; + rotation = <90>; + dc-gpios = <&gpio 25 0>; + backlight = <&backlight>; + }; diff --git a/Documentation/devicetree/bindings/display/panel/panel.txt b/Documentation/devicetree/bindings/display/panel/panel.txt new file mode 100644 index 000000000000..e2e6867852b8 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/panel.txt @@ -0,0 +1,4 @@ +Common display properties +------------------------- + +- rotation: Display rotation in degrees counter clockwise (0,90,180,270) diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index 16d3b5e7f5d1..915f4fa4bcd7 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -187,6 +187,7 @@ mpl MPL AG mqmaker mqmaker Inc. msi Micro-Star International Co. Ltd. mti Imagination Technologies Ltd. (formerly MIPS Technologies Inc.) +multi-inno Multi-Inno Technology Co.,Ltd mundoreader Mundo Reader S.L. murata Murata Manufacturing Co., Ltd. mxicy Macronix International Co., Ltd. diff --git a/Documentation/gpu/index.rst b/Documentation/gpu/index.rst index 367d7c36b8e9..f81278a7c2cc 100644 --- a/Documentation/gpu/index.rst +++ b/Documentation/gpu/index.rst @@ -11,6 +11,7 @@ Linux GPU Driver Developer's Guide drm-kms-helpers drm-uapi i915 + tinydrm vga-switcheroo vgaarbiter diff --git a/Documentation/gpu/tinydrm.rst b/Documentation/gpu/tinydrm.rst new file mode 100644 index 000000000000..a913644bfc19 --- /dev/null +++ b/Documentation/gpu/tinydrm.rst @@ -0,0 +1,42 @@ +========================== +drm/tinydrm Driver library +========================== + +.. kernel-doc:: drivers/gpu/drm/tinydrm/core/tinydrm-core.c + :doc: overview + +Core functionality +================== + +.. kernel-doc:: drivers/gpu/drm/tinydrm/core/tinydrm-core.c + :doc: core + +.. kernel-doc:: include/drm/tinydrm/tinydrm.h + :internal: + +.. kernel-doc:: drivers/gpu/drm/tinydrm/core/tinydrm-core.c + :export: + +.. kernel-doc:: drivers/gpu/drm/tinydrm/core/tinydrm-pipe.c + :export: + +Additional helpers +================== + +.. kernel-doc:: include/drm/tinydrm/tinydrm-helpers.h + :internal: + +.. kernel-doc:: drivers/gpu/drm/tinydrm/core/tinydrm-helpers.c + :export: + +MIPI DBI Compatible Controllers +=============================== + +.. kernel-doc:: drivers/gpu/drm/tinydrm/mipi-dbi.c + :doc: overview + +.. kernel-doc:: include/drm/tinydrm/mipi-dbi.h + :internal: + +.. kernel-doc:: drivers/gpu/drm/tinydrm/mipi-dbi.c + :export: diff --git a/MAINTAINERS b/MAINTAINERS index adfc60d9c456..24a4531c8875 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4245,6 +4245,12 @@ S: Supported F: drivers/gpu/drm/mediatek/ F: Documentation/devicetree/bindings/display/mediatek/ +DRM DRIVER FOR MI0283QT +M: Noralf Trønnes <noralf@tronnes.org> +S: Maintained +F: drivers/gpu/drm/tinydrm/mi0283qt.c +F: Documentation/devicetree/bindings/display/multi-inno,mi0283qt.txt + DRM DRIVER FOR MSM ADRENO GPU M: Rob Clark <robdclark@gmail.com> L: linux-arm-msm@vger.kernel.org diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig index 90bc65d07a35..88e01e08e279 100644 --- a/drivers/gpu/drm/Kconfig +++ b/drivers/gpu/drm/Kconfig @@ -263,6 +263,8 @@ source "drivers/gpu/drm/mxsfb/Kconfig" source "drivers/gpu/drm/meson/Kconfig" +source "drivers/gpu/drm/tinydrm/Kconfig" + # Keep legacy drivers last menuconfig DRM_LEGACY diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile index 92de3991fa56..3ee95793d122 100644 --- a/drivers/gpu/drm/Makefile +++ b/drivers/gpu/drm/Makefile @@ -94,3 +94,4 @@ obj-$(CONFIG_DRM_ARCPGU)+= arc/ obj-y += hisilicon/ obj-$(CONFIG_DRM_ZTE) += zte/ obj-$(CONFIG_DRM_MXSFB) += mxsfb/ +obj-$(CONFIG_DRM_TINYDRM) += tinydrm/ diff --git a/drivers/gpu/drm/tinydrm/Kconfig b/drivers/gpu/drm/tinydrm/Kconfig new file mode 100644 index 000000000000..3504c53846da --- /dev/null +++ b/drivers/gpu/drm/tinydrm/Kconfig @@ -0,0 +1,21 @@ +menuconfig DRM_TINYDRM + tristate "Support for simple displays" + depends on DRM + select DRM_KMS_HELPER + select DRM_KMS_CMA_HELPER + select BACKLIGHT_LCD_SUPPORT + select BACKLIGHT_CLASS_DEVICE + help + Choose this option if you have a tinydrm supported display. + If M is selected the module will be called tinydrm. + +config TINYDRM_MIPI_DBI + tristate + +config TINYDRM_MI0283QT + tristate "DRM support for MI0283QT" + depends on DRM_TINYDRM && SPI + select TINYDRM_MIPI_DBI + help + DRM driver for the Multi-Inno MI0283QT display panel + If M is selected the module will be called mi0283qt. diff --git a/drivers/gpu/drm/tinydrm/Makefile b/drivers/gpu/drm/tinydrm/Makefile new file mode 100644 index 000000000000..7a3604cf4fc2 --- /dev/null +++ b/drivers/gpu/drm/tinydrm/Makefile @@ -0,0 +1,7 @@ +obj-$(CONFIG_DRM_TINYDRM) += core/ + +# Controllers +obj-$(CONFIG_TINYDRM_MIPI_DBI) += mipi-dbi.o + +# Displays +obj-$(CONFIG_TINYDRM_MI0283QT) += mi0283qt.o diff --git a/drivers/gpu/drm/tinydrm/core/Makefile b/drivers/gpu/drm/tinydrm/core/Makefile new file mode 100644 index 000000000000..fb221e6f8885 --- /dev/null +++ b/drivers/gpu/drm/tinydrm/core/Makefile @@ -0,0 +1,3 @@ +tinydrm-y := tinydrm-core.o tinydrm-pipe.o tinydrm-helpers.o + +obj-$(CONFIG_DRM_TINYDRM) += tinydrm.o diff --git a/drivers/gpu/drm/tinydrm/core/tinydrm-core.c b/drivers/gpu/drm/tinydrm/core/tinydrm-core.c new file mode 100644 index 000000000000..6a257dd08ee0 --- /dev/null +++ b/drivers/gpu/drm/tinydrm/core/tinydrm-core.c @@ -0,0 +1,376 @@ +/* + * Copyright (C) 2016 Noralf Trønnes + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <drm/drm_atomic.h> +#include <drm/drm_atomic_helper.h> +#include <drm/drm_crtc_helper.h> +#include <drm/tinydrm/tinydrm.h> +#include <linux/device.h> +#include <linux/dma-buf.h> + +/** + * DOC: overview + * + * This library provides driver helpers for very simple display hardware. + * + * It is based on &drm_simple_display_pipe coupled with a &drm_connector which + * has only one fixed &drm_display_mode. The framebuffers are backed by the + * cma helper and have support for framebuffer flushing (dirty). + * fbdev support is also included. + * + */ + +/** + * DOC: core + * + * The driver allocates &tinydrm_device, initializes it using + * devm_tinydrm_init(), sets up the pipeline using tinydrm_display_pipe_init() + * and registers the DRM device using devm_tinydrm_register(). + */ + +/** + * tinydrm_lastclose - DRM lastclose helper + * @drm: DRM device + * + * This function ensures that fbdev is restored when drm_lastclose() is called + * on the last drm_release(). Drivers can use this as their + * &drm_driver->lastclose callback. + */ +void tinydrm_lastclose(struct drm_device *drm) +{ + struct tinydrm_device *tdev = drm->dev_private; + + DRM_DEBUG_KMS("\n"); + drm_fbdev_cma_restore_mode(tdev->fbdev_cma); +} +EXPORT_SYMBOL(tinydrm_lastclose); + +/** + * tinydrm_gem_cma_prime_import_sg_table - Produce a CMA GEM object from + * another driver's scatter/gather table of pinned pages + * @drm: DRM device to import into + * @attach: DMA-BUF attachment + * @sgt: Scatter/gather table of pinned pages + * + * This function imports a scatter/gather table exported via DMA-BUF by + * another driver using drm_gem_cma_prime_import_sg_table(). It sets the + * kernel virtual address on the CMA object. Drivers should use this as their + * &drm_driver->gem_prime_import_sg_table callback if they need the virtual + * address. tinydrm_gem_cma_free_object() should be used in combination with + * this function. + * + * Returns: + * A pointer to a newly created GEM object or an ERR_PTR-encoded negative + * error code on failure. + */ +struct drm_gem_object * +tinydrm_gem_cma_prime_import_sg_table(struct drm_device *drm, + struct dma_buf_attachment *attach, + struct sg_table *sgt) +{ + struct drm_gem_cma_object *cma_obj; + struct drm_gem_object *obj; + void *vaddr; + + vaddr = dma_buf_vmap(attach->dmabuf); + if (!vaddr) { + DRM_ERROR("Failed to vmap PRIME buffer\n"); + return ERR_PTR(-ENOMEM); + } + + obj = drm_gem_cma_prime_import_sg_table(drm, attach, sgt); + if (IS_ERR(obj)) { + dma_buf_vunmap(attach->dmabuf, vaddr); + return obj; + } + + cma_obj = to_drm_gem_cma_obj(obj); + cma_obj->vaddr = vaddr; + + return obj; +} +EXPORT_SYMBOL(tinydrm_gem_cma_prime_import_sg_table); + +/** + * tinydrm_gem_cma_free_object - Free resources associated with a CMA GEM + * object + * @gem_obj: GEM object to free + * + * This function frees the backing memory of the CMA GEM object, cleans up the + * GEM object state and frees the memory used to store the object itself using + * drm_gem_cma_free_object(). It also handles PRIME buffers which has the kernel + * virtual address set by tinydrm_gem_cma_prime_import_sg_table(). Drivers + * can use this as their &drm_driver->gem_free_object callback. + */ +void tinydrm_gem_cma_free_object(struct drm_gem_object *gem_obj) +{ + if (gem_obj->import_attach) { + struct drm_gem_cma_object *cma_obj; + + cma_obj = to_drm_gem_cma_obj(gem_obj); + dma_buf_vunmap(gem_obj->import_attach->dmabuf, cma_obj->vaddr); + cma_obj->vaddr = NULL; + } + + drm_gem_cma_free_object(gem_obj); +} +EXPORT_SYMBOL_GPL(tinydrm_gem_cma_free_object); + +const struct file_operations tinydrm_fops = { + .owner = THIS_MODULE, + .open = drm_open, + .release = drm_release, + .unlocked_ioctl = drm_ioctl, +#ifdef CONFIG_COMPAT + .compat_ioctl = drm_compat_ioctl, +#endif + .poll = drm_poll, + .read = drm_read, + .llseek = no_llseek, + .mmap = drm_gem_cma_mmap, +}; +EXPORT_SYMBOL(tinydrm_fops); + +static struct drm_framebuffer * +tinydrm_fb_create(struct drm_device *drm, struct drm_file *file_priv, + const struct drm_mode_fb_cmd2 *mode_cmd) +{ + struct tinydrm_device *tdev = drm->dev_private; + + return drm_fb_cma_create_with_funcs(drm, file_priv, mode_cmd, + tdev->fb_funcs); +} + +static const struct drm_mode_config_funcs tinydrm_mode_config_funcs = { + .fb_create = tinydrm_fb_create, + .atomic_check = drm_atomic_helper_check, + .atomic_commit = drm_atomic_helper_commit, +}; + +static int tinydrm_init(struct device *parent, struct tinydrm_device *tdev, + const struct drm_framebuffer_funcs *fb_funcs, + struct drm_driver *driver) +{ + struct drm_device *drm; + + mutex_init(&tdev->dirty_lock); + tdev->fb_funcs = fb_funcs; + + /* + * We don't embed drm_device, because that prevent us from using + * devm_kzalloc() to allocate tinydrm_device in the driver since + * drm_dev_unref() frees the structure. The devm_ functions provide + * for easy error handling. + */ + drm = drm_dev_alloc(driver, parent); + if (IS_ERR(drm)) + return PTR_ERR(drm); + + tdev->drm = drm; + drm->dev_private = tdev; + drm_mode_config_init(drm); + drm->mode_config.funcs = &tinydrm_mode_config_funcs; + + return 0; +} + +static void tinydrm_fini(struct tinydrm_device *tdev) +{ + drm_mode_config_cleanup(tdev->drm); + mutex_destroy(&tdev->dirty_lock); + tdev->drm->dev_private = NULL; + drm_dev_unref(tdev->drm); +} + +static void devm_tinydrm_release(void *data) +{ + tinydrm_fini(data); +} + +/** + * devm_tinydrm_init - Initialize tinydrm device + * @parent: Parent device object + * @tdev: tinydrm device + * @fb_funcs: Framebuffer functions + * @driver: DRM driver + * + * This function initializes @tdev, the underlying DRM device and it's + * mode_config. Resources will be automatically freed on driver detach (devres) + * using drm_mode_config_cleanup() and drm_dev_unref(). + * + * Returns: + * Zero on success, negative error code on failure. + */ +int devm_tinydrm_init(struct device *parent, struct tinydrm_device *tdev, + const struct drm_framebuffer_funcs *fb_funcs, + struct drm_driver *driver) +{ + int ret; + + ret = tinydrm_init(parent, tdev, fb_funcs, driver); + if (ret) + return ret; + + ret = devm_add_action(parent, devm_tinydrm_release, tdev); + if (ret) + tinydrm_fini(tdev); + + return ret; +} +EXPORT_SYMBOL(devm_tinydrm_init); + +static int tinydrm_register(struct tinydrm_device *tdev) +{ + struct drm_device *drm = tdev->drm; + int bpp = drm->mode_config.preferred_depth; + struct drm_fbdev_cma *fbdev; + int ret; + + ret = drm_dev_register(tdev->drm, 0); + if (ret) + return ret; + + fbdev = drm_fbdev_cma_init_with_funcs(drm, bpp ? bpp : 32, + drm->mode_config.num_connector, + tdev->fb_funcs); + if (IS_ERR(fbdev)) + DRM_ERROR("Failed to initialize fbdev: %ld\n", PTR_ERR(fbdev)); + else + tdev->fbdev_cma = fbdev; + + return 0; +} + +static void tinydrm_unregister(struct tinydrm_device *tdev) +{ + struct drm_fbdev_cma *fbdev_cma = tdev->fbdev_cma; + + drm_crtc_force_disable_all(tdev->drm); + /* don't restore fbdev in lastclose, keep pipeline disabled */ + tdev->fbdev_cma = NULL; + drm_dev_unregister(tdev->drm); + if (fbdev_cma) + drm_fbdev_cma_fini(fbdev_cma); +} + +static void devm_tinydrm_register_release(void *data) +{ + tinydrm_unregister(data); +} + +/** + * devm_tinydrm_register - Register tinydrm device + * @tdev: tinydrm device + * + * This function registers the underlying DRM device and fbdev. + * These resources will be automatically unregistered on driver detach (devres) + * and the display pipeline will be disabled. + * + * Returns: + * Zero on success, negative error code on failure. + */ +int devm_tinydrm_register(struct tinydrm_device *tdev) +{ + struct device *dev = tdev->drm->dev; + int ret; + + ret = tinydrm_register(tdev); + if (ret) + return ret; + + ret = devm_add_action(dev, devm_tinydrm_register_release, tdev); + if (ret) + tinydrm_unregister(tdev); + + return ret; +} +EXPORT_SYMBOL(devm_tinydrm_register); + +/** + * tinydrm_shutdown - Shutdown tinydrm + * @tdev: tinydrm device + * + * This function makes sure that the display pipeline is disabled. + * Used by drivers in their shutdown callback to turn off the display + * on machine shutdown and reboot. + */ +void tinydrm_shutdown(struct tinydrm_device *tdev) +{ + drm_crtc_force_disable_all(tdev->drm); +} +EXPORT_SYMBOL(tinydrm_shutdown); + +/** + * tinydrm_suspend - Suspend tinydrm + * @tdev: tinydrm device + * + * Used in driver PM operations to suspend tinydrm. + * Suspends fbdev and DRM. + * Resume with tinydrm_resume(). + * + * Returns: + * Zero on success, negative error code on failure. + */ +int tinydrm_suspend(struct tinydrm_device *tdev) +{ + struct drm_atomic_state *state; + + if (tdev->suspend_state) { + DRM_ERROR("Failed to suspend: state already set\n"); + return -EINVAL; + } + + drm_fbdev_cma_set_suspend_unlocked(tdev->fbdev_cma, 1); + state = drm_atomic_helper_suspend(tdev->drm); + if (IS_ERR(state)) { + drm_fbdev_cma_set_suspend_unlocked(tdev->fbdev_cma, 0); + return PTR_ERR(state); + } + + tdev->suspend_state = state; + + return 0; +} +EXPORT_SYMBOL(tinydrm_suspend); + +/** + * tinydrm_resume - Resume tinydrm + * @tdev: tinydrm device + * + * Used in driver PM operations to resume tinydrm. + * Suspend with tinydrm_suspend(). + * + * Returns: + * Zero on success, negative error code on failure. + */ +int tinydrm_resume(struct tinydrm_device *tdev) +{ + struct drm_atomic_state *state = tdev->suspend_state; + int ret; + + if (!state) { + DRM_ERROR("Failed to resume: state is not set\n"); + return -EINVAL; + } + + tdev->suspend_state = NULL; + + ret = drm_atomic_helper_resume(tdev->drm, state); + if (ret) { + DRM_ERROR("Error resuming state: %d\n", ret); + return ret; + } + + drm_fbdev_cma_set_suspend_unlocked(tdev->fbdev_cma, 0); + + return 0; +} +EXPORT_SYMBOL(tinydrm_resume); + +MODULE_LICENSE("GPL"); diff --git a/drivers/gpu/drm/tinydrm/core/tinydrm-helpers.c b/drivers/gpu/drm/tinydrm/core/tinydrm-helpers.c new file mode 100644 index 000000000000..3ccda6c1e159 --- /dev/null +++ b/drivers/gpu/drm/tinydrm/core/tinydrm-helpers.c @@ -0,0 +1,460 @@ +/* + * Copyright (C) 2016 Noralf Trønnes + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <drm/tinydrm/tinydrm.h> +#include <drm/tinydrm/tinydrm-helpers.h> +#include <linux/backlight.h> +#include <linux/pm.h> +#include <linux/spi/spi.h> +#include <linux/swab.h> + +static unsigned int spi_max; +module_param(spi_max, uint, 0400); +MODULE_PARM_DESC(spi_max, "Set a lower SPI max transfer size"); + +/** + * tinydrm_merge_clips - Merge clip rectangles + * @dst: Destination clip rectangle + * @src: Source clip rectangle(s) + * @num_clips: Number of @src clip rectangles + * @flags: Dirty fb ioctl flags + * @max_width: Maximum width of @dst + * @max_height: Maximum height of @dst + * + * This function merges @src clip rectangle(s) into @dst. If @src is NULL, + * @max_width and @min_width is used to set a full @dst clip rectangle. + * + * Returns: + * true if it's a full clip, false otherwise + */ +bool tinydrm_merge_clips(struct drm_clip_rect *dst, + struct drm_clip_rect *src, unsigned int num_clips, + unsigned int flags, u32 max_width, u32 max_height) +{ + unsigned int i; + + if (!src || !num_clips) { + dst->x1 = 0; + dst->x2 = max_width; + dst->y1 = 0; + dst->y2 = max_height; + return true; + } + + dst->x1 = ~0; + dst->y1 = ~0; + dst->x2 = 0; + dst->y2 = 0; + + for (i = 0; i < num_clips; i++) { + if (flags & DRM_MODE_FB_DIRTY_ANNOTATE_COPY) + i++; + dst->x1 = min(dst->x1, src[i].x1); + dst->x2 = max(dst->x2, src[i].x2); + dst->y1 = min(dst->y1, src[i].y1); + dst->y2 = max(dst->y2, src[i].y2); + } + + if (dst->x2 > max_width || dst->y2 > max_height || + dst->x1 >= dst->x2 || dst->y1 >= dst->y2) { + DRM_DEBUG_KMS("Illegal clip: x1=%u, x2=%u, y1=%u, y2=%u\n", + dst->x1, dst->x2, dst->y1, dst->y2); + dst->x1 = 0; + dst->y1 = 0; + dst->x2 = max_width; + dst->y2 = max_height; + } + + return (dst->x2 - dst->x1) == max_width && + (dst->y2 - dst->y1) == max_height; +} +EXPORT_SYMBOL(tinydrm_merge_clips); + +/** + * tinydrm_memcpy - Copy clip buffer + * @dst: Destination buffer + * @vaddr: Source buffer + * @fb: DRM framebuffer + * @clip: Clip rectangle area to copy + */ +void tinydrm_memcpy(void *dst, void *vaddr, struct drm_framebuffer *fb, + struct drm_clip_rect *clip) +{ + unsigned int cpp = drm_format_plane_cpp(fb->format->format, 0); + unsigned int pitch = fb->pitches[0]; + void *src = vaddr + (clip->y1 * pitch) + (clip->x1 * cpp); + size_t len = (clip->x2 - clip->x1) * cpp; + unsigned int y; + + for (y = clip->y1; y < clip->y2; y++) { + memcpy(dst, src, len); + src += pitch; + dst += len; + } +} +EXPORT_SYMBOL(tinydrm_memcpy); + +/** + * tinydrm_swab16 - Swap bytes into clip buffer + * @dst: RGB565 destination buffer + * @vaddr: RGB565 source buffer + * @fb: DRM framebuffer + * @clip: Clip rectangle area to copy + */ +void tinydrm_swab16(u16 *dst, void *vaddr, struct drm_framebuffer *fb, + struct drm_clip_rect *clip) +{ + size_t len = (clip->x2 - clip->x1) * sizeof(u16); + unsigned int x, y; + u16 *src, *buf; + + /* + * The cma memory is write-combined so reads are uncached. + * Speed up by fetching one line at a time. + */ + buf = kmalloc(len, GFP_KERNEL); + if (!buf) + return; + + for (y = clip->y1; y < clip->y2; y++) { + src = vaddr + (y * fb->pitches[0]); + src += clip->x1; + memcpy(buf, src, len); + src = buf; + for (x = clip->x1; x < clip->x2; x++) + *dst++ = swab16(*src++); + } + + kfree(buf); +} +EXPORT_SYMBOL(tinydrm_swab16); + +/** + * tinydrm_xrgb8888_to_rgb565 - Convert XRGB8888 to RGB565 clip buffer + * @dst: RGB565 destination buffer + * @vaddr: XRGB8888 source buffer + * @fb: DRM framebuffer + * @clip: Clip rectangle area to copy + * @swap: Swap bytes + * + * Drivers can use this function for RGB565 devices that don't natively + * support XRGB8888. + */ +void tinydrm_xrgb8888_to_rgb565(u16 *dst, void *vaddr, + struct drm_framebuffer *fb, + struct drm_clip_rect *clip, bool swap) +{ + size_t len = (clip->x2 - clip->x1) * sizeof(u32); + unsigned int x, y; + u32 *src, *buf; + u16 val16; + + buf = kmalloc(len, GFP_KERNEL); + if (!buf) + return; + + for (y = clip->y1; y < clip->y2; y++) { + src = vaddr + (y * fb->pitches[0]); + src += clip->x1; + memcpy(buf, src, len); + src = buf; + for (x = clip->x1; x < clip->x2; x++) { + val16 = ((*src & 0x00F80000) >> 8) | + ((*src & 0x0000FC00) >> 5) | + ((*src & 0x000000F8) >> 3); + src++; + if (swap) + *dst++ = swab16(val16); + else + *dst++ = val16; + } + } + + kfree(buf); +} +EXPORT_SYMBOL(tinydrm_xrgb8888_to_rgb565); + +/** + * tinydrm_of_find_backlight - Find backlight device in device-tree + * @dev: Device + * + * This function looks for a DT node pointed to by a property named 'backlight' + * and uses of_find_backlight_by_node() to get the backlight device. + * Additionally if the brightness property is zero, it is set to + * max_brightness. + * + * Returns: + * NULL if there's no backlight property. + * Error pointer -EPROBE_DEFER if the DT node is found, but no backlight device + * is found. + * If the backlight device is found, a pointer to the structure is returned. + */ +struct backlight_device *tinydrm_of_find_backlight(struct device *dev) +{ + struct backlight_device *backlight; + struct device_node *np; + + np = of_parse_phandle(dev->of_node, "backlight", 0); + if (!np) + return NULL; + + backlight = of_find_backlight_by_node(np); + of_node_put(np); + + if (!backlight) + return ERR_PTR(-EPROBE_DEFER); + + if (!backlight->props.brightness) { + backlight->props.brightness = backlight->props.max_brightness; + DRM_DEBUG_KMS("Backlight brightness set to %d\n", + backlight->props.brightness); + } + + return backlight; +} +EXPORT_SYMBOL(tinydrm_of_find_backlight); + +/** + * tinydrm_enable_backlight - Enable backlight helper + * @backlight: Backlight device + * + * Returns: + * Zero on success, negative error code on failure. + */ +int tinydrm_enable_backlight(struct backlight_device *backlight) +{ + unsigned int old_state; + int ret; + + if (!backlight) + return 0; + + old_state = backlight->props.state; + backlight->props.state &= ~BL_CORE_FBBLANK; + DRM_DEBUG_KMS("Backlight state: 0x%x -> 0x%x\n", old_state, + backlight->props.state); + + ret = backlight_update_status(backlight); + if (ret) + DRM_ERROR("Failed to enable backlight %d\n", ret); + + return ret; +} +EXPORT_SYMBOL(tinydrm_enable_backlight); + +/** + * tinydrm_disable_backlight - Disable backlight helper + * @backlight: Backlight device + * + * Returns: + * Zero on success, negative error code on failure. + */ +int tinydrm_disable_backlight(struct backlight_device *backlight) +{ + unsigned int old_state; + int ret; + + if (!backlight) + return 0; + + old_state = backlight->props.state; + backlight->props.state |= BL_CORE_FBBLANK; + DRM_DEBUG_KMS("Backlight state: 0x%x -> 0x%x\n", old_state, + backlight->props.state); + ret = backlight_update_status(backlight); + if (ret) + DRM_ERROR("Failed to disable backlight %d\n", ret); + + return ret; +} +EXPORT_SYMBOL(tinydrm_disable_backlight); + +#if IS_ENABLED(CONFIG_SPI) + +/** + * tinydrm_spi_max_transfer_size - Determine max SPI transfer size + * @spi: SPI device + * @max_len: Maximum buffer size needed (optional) + * + * This function returns the maximum size to use for SPI transfers. It checks + * the SPI master, the optional @max_len and the module parameter spi_max and + * returns the smallest. + * + * Returns: + * Maximum size for SPI transfers + */ +size_t tinydrm_spi_max_transfer_size(struct spi_device *spi, size_t max_len) +{ + size_t ret; + + ret = min(spi_max_transfer_size(spi), spi->master->max_dma_len); + if (max_len) + ret = min(ret, max_len); + if (spi_max) + ret = min_t(size_t, ret, spi_max); + ret &= ~0x3; + if (ret < 4) + ret = 4; + + return ret; +} +EXPORT_SYMBOL(tinydrm_spi_max_transfer_size); + +/** + * tinydrm_spi_bpw_supported - Check if bits per word is supported + * @spi: SPI device + * @bpw: Bits per word + * + * This function checks to see if the SPI master driver supports @bpw. + * + * Returns: + * True if @bpw is supported, false otherwise. + */ +bool tinydrm_spi_bpw_supported(struct spi_device *spi, u8 bpw) +{ + u32 bpw_mask = spi->master->bits_per_word_mask; + + if (bpw == 8) + return true; + + if (!bpw_mask) { + dev_warn_once(&spi->dev, + "bits_per_word_mask not set, assume 8-bit only\n"); + return false; + } + + if (bpw_mask & SPI_BPW_MASK(bpw)) + return true; + + return false; +} +EXPORT_SYMBOL(tinydrm_spi_bpw_supported); + +static void +tinydrm_dbg_spi_print(struct spi_device *spi, struct spi_transfer *tr, + const void *buf, int idx, bool tx) +{ + u32 speed_hz = tr->speed_hz ? tr->speed_hz : spi->max_speed_hz; + char linebuf[3 * 32]; + + hex_dump_to_buffer(buf, tr->len, 16, + DIV_ROUND_UP(tr->bits_per_word, 8), + linebuf, sizeof(linebuf), false); + + printk(KERN_DEBUG + " tr(%i): speed=%u%s, bpw=%i, len=%u, %s_buf=[%s%s]\n", idx, + speed_hz > 1000000 ? speed_hz / 1000000 : speed_hz / 1000, + speed_hz > 1000000 ? "MHz" : "kHz", tr->bits_per_word, tr->len, + tx ? "tx" : "rx", linebuf, tr->len > 16 ? " ..." : ""); +} + +/* called through tinydrm_dbg_spi_message() */ +void _tinydrm_dbg_spi_message(struct spi_device *spi, struct spi_message *m) +{ + struct spi_transfer *tmp; + struct list_head *pos; + int i = 0; + + list_for_each(pos, &m->transfers) { + tmp = list_entry(pos, struct spi_transfer, transfer_list); + + if (tmp->tx_buf) + tinydrm_dbg_spi_print(spi, tmp, tmp->tx_buf, i, true); + if (tmp->rx_buf) + tinydrm_dbg_spi_print(spi, tmp, tmp->rx_buf, i, false); + i++; + } +} +EXPORT_SYMBOL(_tinydrm_dbg_spi_message); + +/** + * tinydrm_spi_transfer - SPI transfer helper + * @spi: SPI device + * @speed_hz: Override speed (optional) + * @header: Optional header transfer + * @bpw: Bits per word + * @buf: Buffer to transfer + * @len: Buffer length + * + * This SPI transfer helper breaks up the transfer of @buf into chunks which + * the SPI master driver can handle. If the machine is Little Endian and the + * SPI master driver doesn't support 16 bits per word, it swaps the bytes and + * does a 8-bit transfer. + * If @header is set, it is prepended to each SPI message. + * + * Returns: + * Zero on success, negative error code on failure. + */ +int tinydrm_spi_transfer(struct spi_device *spi, u32 speed_hz, + struct spi_transfer *header, u8 bpw, const void *buf, + size_t len) +{ + struct spi_transfer tr = { + .bits_per_word = bpw, + .speed_hz = speed_hz, + }; + struct spi_message m; + u16 *swap_buf = NULL; + size_t max_chunk; + size_t chunk; + int ret = 0; + + if (WARN_ON_ONCE(bpw != 8 && bpw != 16)) + return -EINVAL; + + max_chunk = tinydrm_spi_max_transfer_size(spi, 0); + + if (drm_debug & DRM_UT_DRIVER) + pr_debug("[drm:%s] bpw=%u, max_chunk=%zu, transfers:\n", + __func__, bpw, max_chunk); + + if (bpw == 16 && !tinydrm_spi_bpw_supported(spi, 16)) { + tr.bits_per_word = 8; + if (tinydrm_machine_little_endian()) { + swap_buf = kmalloc(min(len, max_chunk), GFP_KERNEL); + if (!swap_buf) + return -ENOMEM; + } + } + + spi_message_init(&m); + if (header) + spi_message_add_tail(header, &m); + spi_message_add_tail(&tr, &m); + + while (len) { + chunk = min(len, max_chunk); + + tr.tx_buf = buf; + tr.len = chunk; + + if (swap_buf) { + const u16 *buf16 = buf; + unsigned int i; + + for (i = 0; i < chunk / 2; i++) + swap_buf[i] = swab16(buf16[i]); + + tr.tx_buf = swap_buf; + } + + buf += chunk; + len -= chunk; + + tinydrm_dbg_spi_message(spi, &m); + ret = spi_sync(spi, &m); + if (ret) + return ret; + }; + + return 0; +} +EXPORT_SYMBOL(tinydrm_spi_transfer); + +#endif /* CONFIG_SPI */ diff --git a/drivers/gpu/drm/tinydrm/core/tinydrm-pipe.c b/drivers/gpu/drm/tinydrm/core/tinydrm-pipe.c new file mode 100644 index 000000000000..ec43fb7ad9e4 --- /dev/null +++ b/drivers/gpu/drm/tinydrm/core/tinydrm-pipe.c @@ -0,0 +1,234 @@ +/* + * Copyright (C) 2016 Noralf Trønnes + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <drm/drm_atomic_helper.h> +#include <drm/drm_crtc_helper.h> +#include <drm/drm_modes.h> +#include <drm/tinydrm/tinydrm.h> + +struct tinydrm_connector { + struct drm_connector base; + const struct drm_display_mode *mode; +}; + +static inline struct tinydrm_connector * +to_tinydrm_connector(struct drm_connector *connector) +{ + return container_of(connector, struct tinydrm_connector, base); +} + +static int tinydrm_connector_get_modes(struct drm_connector *connector) +{ + struct tinydrm_connector *tconn = to_tinydrm_connector(connector); + struct drm_display_mode *mode; + + mode = drm_mode_duplicate(connector->dev, tconn->mode); + if (!mode) { + DRM_ERROR("Failed to duplicate mode\n"); + return 0; + } + + if (mode->name[0] == '\0') + drm_mode_set_name(mode); + + mode->type |= DRM_MODE_TYPE_PREFERRED; + drm_mode_probed_add(connector, mode); + + if (mode->width_mm) { + connector->display_info.width_mm = mode->width_mm; + connector->display_info.height_mm = mode->height_mm; + } + + return 1; +} + +static const struct drm_connector_helper_funcs tinydrm_connector_hfuncs = { + .get_modes = tinydrm_connector_get_modes, + .best_encoder = drm_atomic_helper_best_encoder, +}; + +static enum drm_connector_status +tinydrm_connector_detect(struct drm_connector *connector, bool force) +{ + if (drm_device_is_unplugged(connector->dev)) + return connector_status_disconnected; + + return connector->status; +} + +static void tinydrm_connector_destroy(struct drm_connector *connector) +{ + struct tinydrm_connector *tconn = to_tinydrm_connector(connector); + + drm_connector_cleanup(connector); + kfree(tconn); +} + +static const struct drm_connector_funcs tinydrm_connector_funcs = { + .dpms = drm_atomic_helper_connector_dpms, + .reset = drm_atomic_helper_connector_reset, + .detect = tinydrm_connector_detect, + .fill_modes = drm_helper_probe_single_connector_modes, + .destroy = tinydrm_connector_destroy, + .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, +}; + +struct drm_connector * +tinydrm_connector_create(struct drm_device *drm, + const struct drm_display_mode *mode, + int connector_type) +{ + struct tinydrm_connector *tconn; + struct drm_connector *connector; + int ret; + + tconn = kzalloc(sizeof(*tconn), GFP_KERNEL); + if (!tconn) + return ERR_PTR(-ENOMEM); + + tconn->mode = mode; + connector = &tconn->base; + + drm_connector_helper_add(connector, &tinydrm_connector_hfuncs); + ret = drm_connector_init(drm, connector, &tinydrm_connector_funcs, + connector_type); + if (ret) { + kfree(tconn); + return ERR_PTR(ret); + } + + connector->status = connector_status_connected; + + return connector; +} + +/** + * tinydrm_display_pipe_update - Display pipe update helper + * @pipe: Simple display pipe + * @old_state: Old plane state + * + * This function does a full framebuffer flush if the plane framebuffer + * has changed. It also handles vblank events. Drivers can use this as their + * &drm_simple_display_pipe_funcs->update callback. + */ +void tinydrm_display_pipe_update(struct drm_simple_display_pipe *pipe, + struct drm_plane_state *old_state) +{ + struct tinydrm_device *tdev = pipe_to_tinydrm(pipe); + struct drm_framebuffer *fb = pipe->plane.state->fb; + struct drm_crtc *crtc = &tdev->pipe.crtc; + + if (fb && (fb != old_state->fb)) { + pipe->plane.fb = fb; + if (fb->funcs->dirty) + fb->funcs->dirty(fb, NULL, 0, 0, NULL, 0); + } + + if (crtc->state->event) { + spin_lock_irq(&crtc->dev->event_lock); + drm_crtc_send_vblank_event(crtc, crtc->state->event); + spin_unlock_irq(&crtc->dev->event_lock); + crtc->state->event = NULL; + } +} +EXPORT_SYMBOL(tinydrm_display_pipe_update); + +/** + * tinydrm_display_pipe_prepare_fb - Display pipe prepare_fb helper + * @pipe: Simple display pipe + * @plane_state: Plane state + * + * This function uses drm_fb_cma_prepare_fb() to check if the plane FB has an + * dma-buf attached, extracts the exclusive fence and attaches it to plane + * state for the atomic helper to wait on. Drivers can use this as their + * &drm_simple_display_pipe_funcs->prepare_fb callback. + */ +int tinydrm_display_pipe_prepare_fb(struct drm_simple_display_pipe *pipe, + struct drm_plane_state *plane_state) +{ + return drm_fb_cma_prepare_fb(&pipe->plane, plane_state); +} +EXPORT_SYMBOL(tinydrm_display_pipe_prepare_fb); + +static int tinydrm_rotate_mode(struct drm_display_mode *mode, + unsigned int rotation) +{ + if (rotation == 0 || rotation == 180) { + return 0; + } else if (rotation == 90 || rotation == 270) { + swap(mode->hdisplay, mode->vdisplay); + swap(mode->hsync_start, mode->vsync_start); + swap(mode->hsync_end, mode->vsync_end); + swap(mode->htotal, mode->vtotal); + swap(mode->width_mm, mode->height_mm); + return 0; + } else { + return -EINVAL; + } +} + +/** + * tinydrm_display_pipe_init - Initialize display pipe + * @tdev: tinydrm device + * @funcs: Display pipe functions + * @connector_type: Connector type + * @formats: Array of supported formats (DRM_FORMAT\_\*) + * @format_count: Number of elements in @formats + * @mode: Supported mode + * @rotation: Initial @mode rotation in degrees Counter Clock Wise + * + * This function sets up a &drm_simple_display_pipe with a &drm_connector that + * has one fixed &drm_display_mode which is rotated according to @rotation. + * + * Returns: + * Zero on success, negative error code on failure. + */ +int +tinydrm_display_pipe_init(struct tinydrm_device *tdev, + const struct drm_simple_display_pipe_funcs *funcs, + int connector_type, + const uint32_t *formats, + unsigned int format_count, + const struct drm_display_mode *mode, + unsigned int rotation) +{ + struct drm_device *drm = tdev->drm; + struct drm_display_mode *mode_copy; + struct drm_connector *connector; + int ret; + + mode_copy = devm_kmalloc(drm->dev, sizeof(*mode_copy), GFP_KERNEL); + if (!mode_copy) + return -ENOMEM; + + *mode_copy = *mode; + ret = tinydrm_rotate_mode(mode_copy, rotation); + if (ret) { + DRM_ERROR("Illegal rotation value %u\n", rotation); + return -EINVAL; + } + + drm->mode_config.min_width = mode_copy->hdisplay; + drm->mode_config.max_width = mode_copy->hdisplay; + drm->mode_config.min_height = mode_copy->vdisplay; + drm->mode_config.max_height = mode_copy->vdisplay; + + connector = tinydrm_connector_create(drm, mode_copy, connector_type); + if (IS_ERR(connector)) + return PTR_ERR(connector); + + ret = drm_simple_display_pipe_init(drm, &tdev->pipe, funcs, formats, + format_count, connector); + if (ret) + return ret; + + return 0; +} +EXPORT_SYMBOL(tinydrm_display_pipe_init); diff --git a/drivers/gpu/drm/tinydrm/mi0283qt.c b/drivers/gpu/drm/tinydrm/mi0283qt.c new file mode 100644 index 000000000000..b29fe86158f7 --- /dev/null +++ b/drivers/gpu/drm/tinydrm/mi0283qt.c @@ -0,0 +1,279 @@ +/* + * DRM driver for Multi-Inno MI0283QT panels + * + * Copyright 2016 Noralf Trønnes + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <drm/tinydrm/ili9341.h> +#include <drm/tinydrm/mipi-dbi.h> +#include <drm/tinydrm/tinydrm-helpers.h> +#include <linux/delay.h> +#include <linux/gpio/consumer.h> +#include <linux/module.h> +#include <linux/property.h> +#include <linux/regulator/consumer.h> +#include <linux/spi/spi.h> +#include <video/mipi_display.h> + +static int mi0283qt_init(struct mipi_dbi *mipi) +{ + struct tinydrm_device *tdev = &mipi->tinydrm; + struct device *dev = tdev->drm->dev; + u8 addr_mode; + int ret; + + DRM_DEBUG_KMS("\n"); + + ret = regulator_enable(mipi->regulator); + if (ret) { + dev_err(dev, "Failed to enable regulator %d\n", ret); + return ret; + } + + /* Avoid flicker by skipping setup if the bootloader has done it */ + if (mipi_dbi_display_is_on(mipi)) + return 0; + + mipi_dbi_hw_reset(mipi); + ret = mipi_dbi_command(mipi, MIPI_DCS_SOFT_RESET); + if (ret) { + dev_err(dev, "Error sending command %d\n", ret); + regulator_disable(mipi->regulator); + return ret; + } + + msleep(20); + + mipi_dbi_command(mipi, MIPI_DCS_SET_DISPLAY_OFF); + + mipi_dbi_command(mipi, ILI9341_PWCTRLB, 0x00, 0x83, 0x30); + mipi_dbi_command(mipi, ILI9341_PWRSEQ, 0x64, 0x03, 0x12, 0x81); + mipi_dbi_command(mipi, ILI9341_DTCTRLA, 0x85, 0x01, 0x79); + mipi_dbi_command(mipi, ILI9341_PWCTRLA, 0x39, 0x2c, 0x00, 0x34, 0x02); + mipi_dbi_command(mipi, ILI9341_PUMPCTRL, 0x20); + mipi_dbi_command(mipi, ILI9341_DTCTRLB, 0x00, 0x00); + + /* Power Control */ + mipi_dbi_command(mipi, ILI9341_PWCTRL1, 0x26); + mipi_dbi_command(mipi, ILI9341_PWCTRL2, 0x11); + /* VCOM */ + mipi_dbi_command(mipi, ILI9341_VMCTRL1, 0x35, 0x3e); + mipi_dbi_command(mipi, ILI9341_VMCTRL2, 0xbe); + + /* Memory Access Control */ + mipi_dbi_command(mipi, MIPI_DCS_SET_PIXEL_FORMAT, 0x55); + + switch (mipi->rotation) { + default: + addr_mode = ILI9341_MADCTL_MV | ILI9341_MADCTL_MY | + ILI9341_MADCTL_MX; + break; + case 90: + addr_mode = ILI9341_MADCTL_MY; + break; + case 180: + addr_mode = ILI9341_MADCTL_MV; + break; + case 270: + addr_mode = ILI9341_MADCTL_MX; + break; + } + addr_mode |= ILI9341_MADCTL_BGR; + mipi_dbi_command(mipi, MIPI_DCS_SET_ADDRESS_MODE, addr_mode); + + /* Frame Rate */ + mipi_dbi_command(mipi, ILI9341_FRMCTR1, 0x00, 0x1b); + + /* Gamma */ + mipi_dbi_command(mipi, ILI9341_EN3GAM, 0x08); + mipi_dbi_command(mipi, MIPI_DCS_SET_GAMMA_CURVE, 0x01); + mipi_dbi_command(mipi, ILI9341_PGAMCTRL, + 0x1f, 0x1a, 0x18, 0x0a, 0x0f, 0x06, 0x45, 0x87, + 0x32, 0x0a, 0x07, 0x02, 0x07, 0x05, 0x00); + mipi_dbi_command(mipi, ILI9341_NGAMCTRL, + 0x00, 0x25, 0x27, 0x05, 0x10, 0x09, 0x3a, 0x78, + 0x4d, 0x05, 0x18, 0x0d, 0x38, 0x3a, 0x1f); + + /* DDRAM */ + mipi_dbi_command(mipi, ILI9341_ETMOD, 0x07); + + /* Display */ + mipi_dbi_command(mipi, ILI9341_DISCTRL, 0x0a, 0x82, 0x27, 0x00); + mipi_dbi_command(mipi, MIPI_DCS_EXIT_SLEEP_MODE); + msleep(100); + + mipi_dbi_command(mipi, MIPI_DCS_SET_DISPLAY_ON); + msleep(100); + + return 0; +} + +static void mi0283qt_fini(void *data) +{ + struct mipi_dbi *mipi = data; + + DRM_DEBUG_KMS("\n"); + regulator_disable(mipi->regulator); +} + +static const struct drm_simple_display_pipe_funcs mi0283qt_pipe_funcs = { + .enable = mipi_dbi_pipe_enable, + .disable = mipi_dbi_pipe_disable, + .update = tinydrm_display_pipe_update, + .prepare_fb = tinydrm_display_pipe_prepare_fb, +}; + +static const struct drm_display_mode mi0283qt_mode = { + TINYDRM_MODE(320, 240, 58, 43), +}; + +static struct drm_driver mi0283qt_driver = { + .driver_features = DRIVER_GEM | DRIVER_MODESET | DRIVER_PRIME | + DRIVER_ATOMIC, + TINYDRM_GEM_DRIVER_OPS, + .lastclose = tinydrm_lastclose, + .debugfs_init = mipi_dbi_debugfs_init, + .name = "mi0283qt", + .desc = "Multi-Inno MI0283QT", + .date = "20160614", + .major = 1, + .minor = 0, +}; + +static const struct of_device_id mi0283qt_of_match[] = { + { .compatible = "multi-inno,mi0283qt" }, + {}, +}; +MODULE_DEVICE_TABLE(of, mi0283qt_of_match); + +static const struct spi_device_id mi0283qt_id[] = { + { "mi0283qt", 0 }, + { }, +}; +MODULE_DEVICE_TABLE(spi, mi0283qt_id); + +static int mi0283qt_probe(struct spi_device *spi) +{ + struct device *dev = &spi->dev; + struct tinydrm_device *tdev; + struct mipi_dbi *mipi; + struct gpio_desc *dc; + u32 rotation = 0; + int ret; + + mipi = devm_kzalloc(dev, sizeof(*mipi), GFP_KERNEL); + if (!mipi) + return -ENOMEM; + + mipi->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH); + if (IS_ERR(mipi->reset)) { + dev_err(dev, "Failed to get gpio 'reset'\n"); + return PTR_ERR(mipi->reset); + } + + dc = devm_gpiod_get_optional(dev, "dc", GPIOD_OUT_LOW); + if (IS_ERR(dc)) { + dev_err(dev, "Failed to get gpio 'dc'\n"); + return PTR_ERR(dc); + } + + mipi->regulator = devm_regulator_get(dev, "power"); + if (IS_ERR(mipi->regulator)) + return PTR_ERR(mipi->regulator); + + mipi->backlight = tinydrm_of_find_backlight(dev); + if (IS_ERR(mipi->backlight)) + return PTR_ERR(mipi->backlight); + + device_property_read_u32(dev, "rotation", &rotation); + + ret = mipi_dbi_spi_init(spi, mipi, dc, &mi0283qt_pipe_funcs, + &mi0283qt_driver, &mi0283qt_mode, rotation); + if (ret) + return ret; + + ret = mi0283qt_init(mipi); + if (ret) + return ret; + + /* use devres to fini after drm unregister (drv->remove is before) */ + ret = devm_add_action(dev, mi0283qt_fini, mipi); + if (ret) { + mi0283qt_fini(mipi); + return ret; + } + + tdev = &mipi->tinydrm; + + ret = devm_tinydrm_register(tdev); + if (ret) + return ret; + + spi_set_drvdata(spi, mipi); + + DRM_DEBUG_DRIVER("Initialized %s:%s @%uMHz on minor %d\n", + tdev->drm->driver->name, dev_name(dev), + spi->max_speed_hz / 1000000, + tdev->drm->primary->index); + + return 0; +} + +static void mi0283qt_shutdown(struct spi_device *spi) +{ + struct mipi_dbi *mipi = spi_get_drvdata(spi); + + tinydrm_shutdown(&mipi->tinydrm); +} + +static int __maybe_unused mi0283qt_pm_suspend(struct device *dev) +{ + struct mipi_dbi *mipi = dev_get_drvdata(dev); + int ret; + + ret = tinydrm_suspend(&mipi->tinydrm); + if (ret) + return ret; + + mi0283qt_fini(mipi); + + return 0; +} + +static int __maybe_unused mi0283qt_pm_resume(struct device *dev) +{ + struct mipi_dbi *mipi = dev_get_drvdata(dev); + int ret; + + ret = mi0283qt_init(mipi); + if (ret) + return ret; + + return tinydrm_resume(&mipi->tinydrm); +} + +static const struct dev_pm_ops mi0283qt_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(mi0283qt_pm_suspend, mi0283qt_pm_resume) +}; + +static struct spi_driver mi0283qt_spi_driver = { + .driver = { + .name = "mi0283qt", + .owner = THIS_MODULE, + .of_match_table = mi0283qt_of_match, + .pm = &mi0283qt_pm_ops, + }, + .id_table = mi0283qt_id, + .probe = mi0283qt_probe, + .shutdown = mi0283qt_shutdown, +}; +module_spi_driver(mi0283qt_spi_driver); + +MODULE_DESCRIPTION("Multi-Inno MI0283QT DRM driver"); +MODULE_AUTHOR("Noralf Trønnes"); +MODULE_LICENSE("GPL"); diff --git a/drivers/gpu/drm/tinydrm/mipi-dbi.c b/drivers/gpu/drm/tinydrm/mipi-dbi.c new file mode 100644 index 000000000000..07d49ba78d8e --- /dev/null +++ b/drivers/gpu/drm/tinydrm/mipi-dbi.c @@ -0,0 +1,1005 @@ +/* + * MIPI Display Bus Interface (DBI) LCD controller support + * + * Copyright 2016 Noralf Trønnes + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <drm/tinydrm/mipi-dbi.h> +#include <drm/tinydrm/tinydrm-helpers.h> +#include <linux/debugfs.h> +#include <linux/dma-buf.h> +#include <linux/gpio/consumer.h> +#include <linux/module.h> +#include <linux/regulator/consumer.h> +#include <linux/spi/spi.h> +#include <video/mipi_display.h> + +#define MIPI_DBI_MAX_SPI_READ_SPEED 2000000 /* 2MHz */ + +#define DCS_POWER_MODE_DISPLAY BIT(2) +#define DCS_POWER_MODE_DISPLAY_NORMAL_MODE BIT(3) +#define DCS_POWER_MODE_SLEEP_MODE BIT(4) +#define DCS_POWER_MODE_PARTIAL_MODE BIT(5) +#define DCS_POWER_MODE_IDLE_MODE BIT(6) +#define DCS_POWER_MODE_RESERVED_MASK (BIT(0) | BIT(1) | BIT(7)) + +/** + * DOC: overview + * + * This library provides helpers for MIPI Display Bus Interface (DBI) + * compatible display controllers. + * + * Many controllers for tiny lcd displays are MIPI compliant and can use this + * library. If a controller uses registers 0x2A and 0x2B to set the area to + * update and uses register 0x2C to write to frame memory, it is most likely + * MIPI compliant. + * + * Only MIPI Type 1 displays are supported since a full frame memory is needed. + * + * There are 3 MIPI DBI implementation types: + * + * A. Motorola 6800 type parallel bus + * + * B. Intel 8080 type parallel bus + * + * C. SPI type with 3 options: + * + * 1. 9-bit with the Data/Command signal as the ninth bit + * 2. Same as above except it's sent as 16 bits + * 3. 8-bit with the Data/Command signal as a separate D/CX pin + * + * Currently mipi_dbi only supports Type C options 1 and 3 with + * mipi_dbi_spi_init(). + */ + +#define MIPI_DBI_DEBUG_COMMAND(cmd, data, len) \ +({ \ + if (!len) \ + DRM_DEBUG_DRIVER("cmd=%02x\n", cmd); \ + else if (len <= 32) \ + DRM_DEBUG_DRIVER("cmd=%02x, par=%*ph\n", cmd, len, data); \ + else \ + DRM_DEBUG_DRIVER("cmd=%02x, len=%zu\n", cmd, len); \ +}) + +static const u8 mipi_dbi_dcs_read_commands[] = { + MIPI_DCS_GET_DISPLAY_ID, + MIPI_DCS_GET_RED_CHANNEL, + MIPI_DCS_GET_GREEN_CHANNEL, + MIPI_DCS_GET_BLUE_CHANNEL, + MIPI_DCS_GET_DISPLAY_STATUS, + MIPI_DCS_GET_POWER_MODE, + MIPI_DCS_GET_ADDRESS_MODE, + MIPI_DCS_GET_PIXEL_FORMAT, + MIPI_DCS_GET_DISPLAY_MODE, + MIPI_DCS_GET_SIGNAL_MODE, + MIPI_DCS_GET_DIAGNOSTIC_RESULT, + MIPI_DCS_READ_MEMORY_START, + MIPI_DCS_READ_MEMORY_CONTINUE, + MIPI_DCS_GET_SCANLINE, + MIPI_DCS_GET_DISPLAY_BRIGHTNESS, + MIPI_DCS_GET_CONTROL_DISPLAY, + MIPI_DCS_GET_POWER_SAVE, + MIPI_DCS_GET_CABC_MIN_BRIGHTNESS, + MIPI_DCS_READ_DDB_START, + MIPI_DCS_READ_DDB_CONTINUE, + 0, /* sentinel */ +}; + +static bool mipi_dbi_command_is_read(struct mipi_dbi *mipi, u8 cmd) +{ + unsigned int i; + + if (!mipi->read_commands) + return false; + + for (i = 0; i < 0xff; i++) { + if (!mipi->read_commands[i]) + return false; + if (cmd == mipi->read_commands[i]) + return true; + } + + return false; +} + +/** + * mipi_dbi_command_read - MIPI DCS read command + * @mipi: MIPI structure + * @cmd: Command + * @val: Value read + * + * Send MIPI DCS read command to the controller. + * + * Returns: + * Zero on success, negative error code on failure. + */ +int mipi_dbi_command_read(struct mipi_dbi *mipi, u8 cmd, u8 *val) +{ + if (!mipi->read_commands) + return -EACCES; + + if (!mipi_dbi_command_is_read(mipi, cmd)) + return -EINVAL; + + return mipi_dbi_command_buf(mipi, cmd, val, 1); +} +EXPORT_SYMBOL(mipi_dbi_command_read); + +/** + * mipi_dbi_command_buf - MIPI DCS command with parameter(s) in an array + * @mipi: MIPI structure + * @cmd: Command + * @data: Parameter buffer + * @len: Buffer length + * + * Returns: + * Zero on success, negative error code on failure. + */ +int mipi_dbi_command_buf(struct mipi_dbi *mipi, u8 cmd, u8 *data, size_t len) +{ + int ret; + + mutex_lock(&mipi->cmdlock); + ret = mipi->command(mipi, cmd, data, len); + mutex_unlock(&mipi->cmdlock); + + return ret; +} +EXPORT_SYMBOL(mipi_dbi_command_buf); + +static int mipi_dbi_buf_copy(void *dst, struct drm_framebuffer *fb, + struct drm_clip_rect *clip, bool swap) +{ + struct drm_gem_cma_object *cma_obj = drm_fb_cma_get_gem_obj(fb, 0); + struct dma_buf_attachment *import_attach = cma_obj->base.import_attach; + struct drm_format_name_buf format_name; + void *src = cma_obj->vaddr; + int ret = 0; + + if (import_attach) { + ret = dma_buf_begin_cpu_access(import_attach->dmabuf, + DMA_FROM_DEVICE); + if (ret) + return ret; + } + + switch (fb->format->format) { + case DRM_FORMAT_RGB565: + if (swap) + tinydrm_swab16(dst, src, fb, clip); + else + tinydrm_memcpy(dst, src, fb, clip); + break; + case DRM_FORMAT_XRGB8888: + tinydrm_xrgb8888_to_rgb565(dst, src, fb, clip, swap); + break; + default: + dev_err_once(fb->dev->dev, "Format is not supported: %s\n", + drm_get_format_name(fb->format->format, + &format_name)); + return -EINVAL; + } + + if (import_attach) + ret = dma_buf_end_cpu_access(import_attach->dmabuf, + DMA_FROM_DEVICE); + return ret; +} + +static int mipi_dbi_fb_dirty(struct drm_framebuffer *fb, + struct drm_file *file_priv, + unsigned int flags, unsigned int color, + struct drm_clip_rect *clips, + unsigned int num_clips) +{ + struct drm_gem_cma_object *cma_obj = drm_fb_cma_get_gem_obj(fb, 0); + struct tinydrm_device *tdev = fb->dev->dev_private; + struct mipi_dbi *mipi = mipi_dbi_from_tinydrm(tdev); + bool swap = mipi->swap_bytes; + struct drm_clip_rect clip; + int ret = 0; + bool full; + void *tr; + + mutex_lock(&tdev->dirty_lock); + + if (!mipi->enabled) + goto out_unlock; + + /* fbdev can flush even when we're not interested */ + if (tdev->pipe.plane.fb != fb) + goto out_unlock; + + full = tinydrm_merge_clips(&clip, clips, num_clips, flags, + fb->width, fb->height); + + DRM_DEBUG("Flushing [FB:%d] x1=%u, x2=%u, y1=%u, y2=%u\n", fb->base.id, + clip.x1, clip.x2, clip.y1, clip.y2); + + if (!mipi->dc || !full || swap || + fb->format->format == DRM_FORMAT_XRGB8888) { + tr = mipi->tx_buf; + ret = mipi_dbi_buf_copy(mipi->tx_buf, fb, &clip, swap); + if (ret) + goto out_unlock; + } else { + tr = cma_obj->vaddr; + } + + mipi_dbi_command(mipi, MIPI_DCS_SET_COLUMN_ADDRESS, + (clip.x1 >> 8) & 0xFF, clip.x1 & 0xFF, + (clip.x2 >> 8) & 0xFF, (clip.x2 - 1) & 0xFF); + mipi_dbi_command(mipi, MIPI_DCS_SET_PAGE_ADDRESS, + (clip.y1 >> 8) & 0xFF, clip.y1 & 0xFF, + (clip.y2 >> 8) & 0xFF, (clip.y2 - 1) & 0xFF); + + ret = mipi_dbi_command_buf(mipi, MIPI_DCS_WRITE_MEMORY_START, tr, + (clip.x2 - clip.x1) * (clip.y2 - clip.y1) * 2); + +out_unlock: + mutex_unlock(&tdev->dirty_lock); + + if (ret) + dev_err_once(fb->dev->dev, "Failed to update display %d\n", + ret); + + return ret; +} + +static const struct drm_framebuffer_funcs mipi_dbi_fb_funcs = { + .destroy = drm_fb_cma_destroy, + .create_handle = drm_fb_cma_create_handle, + .dirty = mipi_dbi_fb_dirty, +}; + +/** + * mipi_dbi_pipe_enable - MIPI DBI pipe enable helper + * @pipe: Display pipe + * @crtc_state: CRTC state + * + * This function enables backlight. Drivers can use this as their + * &drm_simple_display_pipe_funcs->enable callback. + */ +void mipi_dbi_pipe_enable(struct drm_simple_display_pipe *pipe, + struct drm_crtc_state *crtc_state) +{ + struct tinydrm_device *tdev = pipe_to_tinydrm(pipe); + struct mipi_dbi *mipi = mipi_dbi_from_tinydrm(tdev); + struct drm_framebuffer *fb = pipe->plane.fb; + + DRM_DEBUG_KMS("\n"); + + mipi->enabled = true; + if (fb) + fb->funcs->dirty(fb, NULL, 0, 0, NULL, 0); + + tinydrm_enable_backlight(mipi->backlight); +} +EXPORT_SYMBOL(mipi_dbi_pipe_enable); + +static void mipi_dbi_blank(struct mipi_dbi *mipi) +{ + struct drm_device *drm = mipi->tinydrm.drm; + u16 height = drm->mode_config.min_height; + u16 width = drm->mode_config.min_width; + size_t len = width * height * 2; + + memset(mipi->tx_buf, 0, len); + + mipi_dbi_command(mipi, MIPI_DCS_SET_COLUMN_ADDRESS, 0, 0, + (width >> 8) & 0xFF, (width - 1) & 0xFF); + mipi_dbi_command(mipi, MIPI_DCS_SET_PAGE_ADDRESS, 0, 0, + (height >> 8) & 0xFF, (height - 1) & 0xFF); + mipi_dbi_command_buf(mipi, MIPI_DCS_WRITE_MEMORY_START, + (u8 *)mipi->tx_buf, len); +} + +/** + * mipi_dbi_pipe_disable - MIPI DBI pipe disable helper + * @pipe: Display pipe + * + * This function disables backlight if present or if not the + * display memory is blanked. Drivers can use this as their + * &drm_simple_display_pipe_funcs->disable callback. + */ +void mipi_dbi_pipe_disable(struct drm_simple_display_pipe *pipe) +{ + struct tinydrm_device *tdev = pipe_to_tinydrm(pipe); + struct mipi_dbi *mipi = mipi_dbi_from_tinydrm(tdev); + + DRM_DEBUG_KMS("\n"); + + mipi->enabled = false; + + if (mipi->backlight) + tinydrm_disable_backlight(mipi->backlight); + else + mipi_dbi_blank(mipi); +} +EXPORT_SYMBOL(mipi_dbi_pipe_disable); + +static const uint32_t mipi_dbi_formats[] = { + DRM_FORMAT_RGB565, + DRM_FORMAT_XRGB8888, +}; + +/** + * mipi_dbi_init - MIPI DBI initialization + * @dev: Parent device + * @mipi: &mipi_dbi structure to initialize + * @pipe_funcs: Display pipe functions + * @driver: DRM driver + * @mode: Display mode + * @rotation: Initial rotation in degrees Counter Clock Wise + * + * This function initializes a &mipi_dbi structure and it's underlying + * @tinydrm_device. It also sets up the display pipeline. + * + * Supported formats: Native RGB565 and emulated XRGB8888. + * + * Objects created by this function will be automatically freed on driver + * detach (devres). + * + * Returns: + * Zero on success, negative error code on failure. + */ +int mipi_dbi_init(struct device *dev, struct mipi_dbi *mipi, + const struct drm_simple_display_pipe_funcs *pipe_funcs, + struct drm_driver *driver, + const struct drm_display_mode *mode, unsigned int rotation) +{ + size_t bufsize = mode->vdisplay * mode->hdisplay * sizeof(u16); + struct tinydrm_device *tdev = &mipi->tinydrm; + int ret; + + if (!mipi->command) + return -EINVAL; + + mutex_init(&mipi->cmdlock); + + mipi->tx_buf = devm_kmalloc(dev, bufsize, GFP_KERNEL); + if (!mipi->tx_buf) + return -ENOMEM; + + ret = devm_tinydrm_init(dev, tdev, &mipi_dbi_fb_funcs, driver); + if (ret) + return ret; + + /* TODO: Maybe add DRM_MODE_CONNECTOR_SPI */ + ret = tinydrm_display_pipe_init(tdev, pipe_funcs, + DRM_MODE_CONNECTOR_VIRTUAL, + mipi_dbi_formats, + ARRAY_SIZE(mipi_dbi_formats), mode, + rotation); + if (ret) + return ret; + + tdev->drm->mode_config.preferred_depth = 16; + mipi->rotation = rotation; + + drm_mode_config_reset(tdev->drm); + + DRM_DEBUG_KMS("preferred_depth=%u, rotation = %u\n", + tdev->drm->mode_config.preferred_depth, rotation); + + return 0; +} +EXPORT_SYMBOL(mipi_dbi_init); + +/** + * mipi_dbi_hw_reset - Hardware reset of controller + * @mipi: MIPI DBI structure + * + * Reset controller if the &mipi_dbi->reset gpio is set. + */ +void mipi_dbi_hw_reset(struct mipi_dbi *mipi) +{ + if (!mipi->reset) + return; + + gpiod_set_value_cansleep(mipi->reset, 0); + msleep(20); + gpiod_set_value_cansleep(mipi->reset, 1); + msleep(120); +} +EXPORT_SYMBOL(mipi_dbi_hw_reset); + +/** + * mipi_dbi_display_is_on - Check if display is on + * @mipi: MIPI DBI structure + * + * This function checks the Power Mode register (if readable) to see if + * display output is turned on. This can be used to see if the bootloader + * has already turned on the display avoiding flicker when the pipeline is + * enabled. + * + * Returns: + * true if the display can be verified to be on, false otherwise. + */ +bool mipi_dbi_display_is_on(struct mipi_dbi *mipi) +{ + u8 val; + + if (mipi_dbi_command_read(mipi, MIPI_DCS_GET_POWER_MODE, &val)) + return false; + + val &= ~DCS_POWER_MODE_RESERVED_MASK; + + if (val != (DCS_POWER_MODE_DISPLAY | + DCS_POWER_MODE_DISPLAY_NORMAL_MODE | DCS_POWER_MODE_SLEEP_MODE)) + return false; + + DRM_DEBUG_DRIVER("Display is ON\n"); + + return true; +} +EXPORT_SYMBOL(mipi_dbi_display_is_on); + +#if IS_ENABLED(CONFIG_SPI) + +/* + * Many controllers have a max speed of 10MHz, but can be pushed way beyond + * that. Increase reliability by running pixel data at max speed and the rest + * at 10MHz, preventing transfer glitches from messing up the init settings. + */ +static u32 mipi_dbi_spi_cmd_max_speed(struct spi_device *spi, size_t len) +{ + if (len > 64) + return 0; /* use default */ + + return min_t(u32, 10000000, spi->max_speed_hz); +} + +/* + * MIPI DBI Type C Option 1 + * + * If the SPI controller doesn't have 9 bits per word support, + * use blocks of 9 bytes to send 8x 9-bit words using a 8-bit SPI transfer. + * Pad partial blocks with MIPI_DCS_NOP (zero). + * This is how the D/C bit (x) is added: + * x7654321 + * 0x765432 + * 10x76543 + * 210x7654 + * 3210x765 + * 43210x76 + * 543210x7 + * 6543210x + * 76543210 + */ + +static int mipi_dbi_spi1e_transfer(struct mipi_dbi *mipi, int dc, + const void *buf, size_t len, + unsigned int bpw) +{ + bool swap_bytes = (bpw == 16 && tinydrm_machine_little_endian()); + size_t chunk, max_chunk = mipi->tx_buf9_len; + struct spi_device *spi = mipi->spi; + struct spi_transfer tr = { + .tx_buf = mipi->tx_buf9, + .bits_per_word = 8, + }; + struct spi_message m; + const u8 *src = buf; + int i, ret; + u8 *dst; + + if (drm_debug & DRM_UT_DRIVER) + pr_debug("[drm:%s] dc=%d, max_chunk=%zu, transfers:\n", + __func__, dc, max_chunk); + + tr.speed_hz = mipi_dbi_spi_cmd_max_speed(spi, len); + spi_message_init_with_transfers(&m, &tr, 1); + + if (!dc) { + if (WARN_ON_ONCE(len != 1)) + return -EINVAL; + + /* Command: pad no-op's (zeroes) at beginning of block */ + dst = mipi->tx_buf9; + memset(dst, 0, 9); + dst[8] = *src; + tr.len = 9; + + tinydrm_dbg_spi_message(spi, &m); + + return spi_sync(spi, &m); + } + + /* max with room for adding one bit per byte */ + max_chunk = max_chunk / 9 * 8; + /* but no bigger than len */ + max_chunk = min(max_chunk, len); + /* 8 byte blocks */ + max_chunk = max_t(size_t, 8, max_chunk & ~0x7); + + while (len) { + size_t added = 0; + + chunk = min(len, max_chunk); + len -= chunk; + dst = mipi->tx_buf9; + + if (chunk < 8) { + u8 val, carry = 0; + + /* Data: pad no-op's (zeroes) at end of block */ + memset(dst, 0, 9); + + if (swap_bytes) { + for (i = 1; i < (chunk + 1); i++) { + val = src[1]; + *dst++ = carry | BIT(8 - i) | (val >> i); + carry = val << (8 - i); + i++; + val = src[0]; + *dst++ = carry | BIT(8 - i) | (val >> i); + carry = val << (8 - i); + src += 2; + } + *dst++ = carry; + } else { + for (i = 1; i < (chunk + 1); i++) { + val = *src++; + *dst++ = carry | BIT(8 - i) | (val >> i); + carry = val << (8 - i); + } + *dst++ = carry; + } + + chunk = 8; + added = 1; + } else { + for (i = 0; i < chunk; i += 8) { + if (swap_bytes) { + *dst++ = BIT(7) | (src[1] >> 1); + *dst++ = (src[1] << 7) | BIT(6) | (src[0] >> 2); + *dst++ = (src[0] << 6) | BIT(5) | (src[3] >> 3); + *dst++ = (src[3] << 5) | BIT(4) | (src[2] >> 4); + *dst++ = (src[2] << 4) | BIT(3) | (src[5] >> 5); + *dst++ = (src[5] << 3) | BIT(2) | (src[4] >> 6); + *dst++ = (src[4] << 2) | BIT(1) | (src[7] >> 7); + *dst++ = (src[7] << 1) | BIT(0); + *dst++ = src[6]; + } else { + *dst++ = BIT(7) | (src[0] >> 1); + *dst++ = (src[0] << 7) | BIT(6) | (src[1] >> 2); + *dst++ = (src[1] << 6) | BIT(5) | (src[2] >> 3); + *dst++ = (src[2] << 5) | BIT(4) | (src[3] >> 4); + *dst++ = (src[3] << 4) | BIT(3) | (src[4] >> 5); + *dst++ = (src[4] << 3) | BIT(2) | (src[5] >> 6); + *dst++ = (src[5] << 2) | BIT(1) | (src[6] >> 7); + *dst++ = (src[6] << 1) | BIT(0); + *dst++ = src[7]; + } + + src += 8; + added++; + } + } + + tr.len = chunk + added; + + tinydrm_dbg_spi_message(spi, &m); + ret = spi_sync(spi, &m); + if (ret) + return ret; + }; + + return 0; +} + +static int mipi_dbi_spi1_transfer(struct mipi_dbi *mipi, int dc, + const void *buf, size_t len, + unsigned int bpw) +{ + struct spi_device *spi = mipi->spi; + struct spi_transfer tr = { + .bits_per_word = 9, + }; + const u16 *src16 = buf; + const u8 *src8 = buf; + struct spi_message m; + size_t max_chunk; + u16 *dst16; + int ret; + + if (!tinydrm_spi_bpw_supported(spi, 9)) + return mipi_dbi_spi1e_transfer(mipi, dc, buf, len, bpw); + + tr.speed_hz = mipi_dbi_spi_cmd_max_speed(spi, len); + max_chunk = mipi->tx_buf9_len; + dst16 = mipi->tx_buf9; + + if (drm_debug & DRM_UT_DRIVER) + pr_debug("[drm:%s] dc=%d, max_chunk=%zu, transfers:\n", + __func__, dc, max_chunk); + + max_chunk = min(max_chunk / 2, len); + + spi_message_init_with_transfers(&m, &tr, 1); + tr.tx_buf = dst16; + + while (len) { + size_t chunk = min(len, max_chunk); + unsigned int i; + + if (bpw == 16 && tinydrm_machine_little_endian()) { + for (i = 0; i < (chunk * 2); i += 2) { + dst16[i] = *src16 >> 8; + dst16[i + 1] = *src16++ & 0xFF; + if (dc) { + dst16[i] |= 0x0100; + dst16[i + 1] |= 0x0100; + } + } + } else { + for (i = 0; i < chunk; i++) { + dst16[i] = *src8++; + if (dc) + dst16[i] |= 0x0100; + } + } + + tr.len = chunk; + len -= chunk; + + tinydrm_dbg_spi_message(spi, &m); + ret = spi_sync(spi, &m); + if (ret) + return ret; + }; + + return 0; +} + +static int mipi_dbi_typec1_command(struct mipi_dbi *mipi, u8 cmd, + u8 *parameters, size_t num) +{ + unsigned int bpw = (cmd == MIPI_DCS_WRITE_MEMORY_START) ? 16 : 8; + int ret; + + if (mipi_dbi_command_is_read(mipi, cmd)) + return -ENOTSUPP; + + MIPI_DBI_DEBUG_COMMAND(cmd, parameters, num); + + ret = mipi_dbi_spi1_transfer(mipi, 0, &cmd, 1, 8); + if (ret || !num) + return ret; + + return mipi_dbi_spi1_transfer(mipi, 1, parameters, num, bpw); +} + +/* MIPI DBI Type C Option 3 */ + +static int mipi_dbi_typec3_command_read(struct mipi_dbi *mipi, u8 cmd, + u8 *data, size_t len) +{ + struct spi_device *spi = mipi->spi; + u32 speed_hz = min_t(u32, MIPI_DBI_MAX_SPI_READ_SPEED, + spi->max_speed_hz / 2); + struct spi_transfer tr[2] = { + { + .speed_hz = speed_hz, + .tx_buf = &cmd, + .len = 1, + }, { + .speed_hz = speed_hz, + .len = len, + }, + }; + struct spi_message m; + u8 *buf; + int ret; + + if (!len) + return -EINVAL; + + /* + * Support non-standard 24-bit and 32-bit Nokia read commands which + * start with a dummy clock, so we need to read an extra byte. + */ + if (cmd == MIPI_DCS_GET_DISPLAY_ID || + cmd == MIPI_DCS_GET_DISPLAY_STATUS) { + if (!(len == 3 || len == 4)) + return -EINVAL; + + tr[1].len = len + 1; + } + + buf = kmalloc(tr[1].len, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + tr[1].rx_buf = buf; + gpiod_set_value_cansleep(mipi->dc, 0); + + spi_message_init_with_transfers(&m, tr, ARRAY_SIZE(tr)); + ret = spi_sync(spi, &m); + if (ret) + goto err_free; + + tinydrm_dbg_spi_message(spi, &m); + + if (tr[1].len == len) { + memcpy(data, buf, len); + } else { + unsigned int i; + + for (i = 0; i < len; i++) + data[i] = (buf[i] << 1) | !!(buf[i + 1] & BIT(7)); + } + + MIPI_DBI_DEBUG_COMMAND(cmd, data, len); + +err_free: + kfree(buf); + + return ret; +} + +static int mipi_dbi_typec3_command(struct mipi_dbi *mipi, u8 cmd, + u8 *par, size_t num) +{ + struct spi_device *spi = mipi->spi; + unsigned int bpw = 8; + u32 speed_hz; + int ret; + + if (mipi_dbi_command_is_read(mipi, cmd)) + return mipi_dbi_typec3_command_read(mipi, cmd, par, num); + + MIPI_DBI_DEBUG_COMMAND(cmd, par, num); + + gpiod_set_value_cansleep(mipi->dc, 0); + speed_hz = mipi_dbi_spi_cmd_max_speed(spi, 1); + ret = tinydrm_spi_transfer(spi, speed_hz, NULL, 8, &cmd, 1); + if (ret || !num) + return ret; + + if (cmd == MIPI_DCS_WRITE_MEMORY_START && !mipi->swap_bytes) + bpw = 16; + + gpiod_set_value_cansleep(mipi->dc, 1); + speed_hz = mipi_dbi_spi_cmd_max_speed(spi, num); + + return tinydrm_spi_transfer(spi, speed_hz, NULL, bpw, par, num); +} + +/** + * mipi_dbi_spi_init - Initialize MIPI DBI SPI interfaced controller + * @spi: SPI device + * @dc: D/C gpio (optional) + * @mipi: &mipi_dbi structure to initialize + * @pipe_funcs: Display pipe functions + * @driver: DRM driver + * @mode: Display mode + * @rotation: Initial rotation in degrees Counter Clock Wise + * + * This function sets &mipi_dbi->command, enables &mipi->read_commands for the + * usual read commands and initializes @mipi using mipi_dbi_init(). + * + * If @dc is set, a Type C Option 3 interface is assumed, if not + * Type C Option 1. + * + * If the SPI master driver doesn't support the necessary bits per word, + * the following transformation is used: + * + * - 9-bit: reorder buffer as 9x 8-bit words, padded with no-op command. + * - 16-bit: if big endian send as 8-bit, if little endian swap bytes + * + * Returns: + * Zero on success, negative error code on failure. + */ +int mipi_dbi_spi_init(struct spi_device *spi, struct mipi_dbi *mipi, + struct gpio_desc *dc, + const struct drm_simple_display_pipe_funcs *pipe_funcs, + struct drm_driver *driver, + const struct drm_display_mode *mode, + unsigned int rotation) +{ + size_t tx_size = tinydrm_spi_max_transfer_size(spi, 0); + struct device *dev = &spi->dev; + int ret; + + if (tx_size < 16) { + DRM_ERROR("SPI transmit buffer too small: %zu\n", tx_size); + return -EINVAL; + } + + /* + * Even though it's not the SPI device that does DMA (the master does), + * the dma mask is necessary for the dma_alloc_wc() in + * drm_gem_cma_create(). The dma_addr returned will be a physical + * adddress which might be different from the bus address, but this is + * not a problem since the address will not be used. + * The virtual address is used in the transfer and the SPI core + * re-maps it on the SPI master device using the DMA streaming API + * (spi_map_buf()). + */ + if (!dev->coherent_dma_mask) { + ret = dma_coerce_mask_and_coherent(dev, DMA_BIT_MASK(32)); + if (ret) { + dev_warn(dev, "Failed to set dma mask %d\n", ret); + return ret; + } + } + + mipi->spi = spi; + mipi->read_commands = mipi_dbi_dcs_read_commands; + + if (dc) { + mipi->command = mipi_dbi_typec3_command; + mipi->dc = dc; + if (tinydrm_machine_little_endian() && + !tinydrm_spi_bpw_supported(spi, 16)) + mipi->swap_bytes = true; + } else { + mipi->command = mipi_dbi_typec1_command; + mipi->tx_buf9_len = tx_size; + mipi->tx_buf9 = devm_kmalloc(dev, tx_size, GFP_KERNEL); + if (!mipi->tx_buf9) + return -ENOMEM; + } + + return mipi_dbi_init(dev, mipi, pipe_funcs, driver, mode, rotation); +} +EXPORT_SYMBOL(mipi_dbi_spi_init); + +#endif /* CONFIG_SPI */ + +#ifdef CONFIG_DEBUG_FS + +static ssize_t mipi_dbi_debugfs_command_write(struct file *file, + const char __user *ubuf, + size_t count, loff_t *ppos) +{ + struct seq_file *m = file->private_data; + struct mipi_dbi *mipi = m->private; + u8 val, cmd, parameters[64]; + char *buf, *pos, *token; + unsigned int i; + int ret; + + buf = memdup_user_nul(ubuf, count); + if (IS_ERR(buf)) + return PTR_ERR(buf); + + /* strip trailing whitespace */ + for (i = count - 1; i > 0; i--) + if (isspace(buf[i])) + buf[i] = '\0'; + else + break; + i = 0; + pos = buf; + while (pos) { + token = strsep(&pos, " "); + if (!token) { + ret = -EINVAL; + goto err_free; + } + + ret = kstrtou8(token, 16, &val); + if (ret < 0) + goto err_free; + + if (token == buf) + cmd = val; + else + parameters[i++] = val; + + if (i == 64) { + ret = -E2BIG; + goto err_free; + } + } + + ret = mipi_dbi_command_buf(mipi, cmd, parameters, i); + +err_free: + kfree(buf); + + return ret < 0 ? ret : count; +} + +static int mipi_dbi_debugfs_command_show(struct seq_file *m, void *unused) +{ + struct mipi_dbi *mipi = m->private; + u8 cmd, val[4]; + size_t len, i; + int ret; + + for (cmd = 0; cmd < 255; cmd++) { + if (!mipi_dbi_command_is_read(mipi, cmd)) + continue; + + switch (cmd) { + case MIPI_DCS_READ_MEMORY_START: + case MIPI_DCS_READ_MEMORY_CONTINUE: + len = 2; + break; + case MIPI_DCS_GET_DISPLAY_ID: + len = 3; + break; + case MIPI_DCS_GET_DISPLAY_STATUS: + len = 4; + break; + default: + len = 1; + break; + } + + seq_printf(m, "%02x: ", cmd); + ret = mipi_dbi_command_buf(mipi, cmd, val, len); + if (ret) { + seq_puts(m, "XX\n"); + continue; + } + + for (i = 0; i < len; i++) + seq_printf(m, "%02x", val[i]); + seq_puts(m, "\n"); + } + + return 0; +} + +static int mipi_dbi_debugfs_command_open(struct inode *inode, + struct file *file) +{ + return single_open(file, mipi_dbi_debugfs_command_show, + inode->i_private); +} + +static const struct file_operations mipi_dbi_debugfs_command_fops = { + .owner = THIS_MODULE, + .open = mipi_dbi_debugfs_command_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .write = mipi_dbi_debugfs_command_write, +}; + +static const struct drm_info_list mipi_dbi_debugfs_list[] = { + { "fb", drm_fb_cma_debugfs_show, 0 }, +}; + +/** + * mipi_dbi_debugfs_init - Create debugfs entries + * @minor: DRM minor + * + * This function creates a 'command' debugfs file for sending commands to the + * controller or getting the read command values. + * Drivers can use this as their &drm_driver->debugfs_init callback. + * + * Returns: + * Zero on success, negative error code on failure. + */ +int mipi_dbi_debugfs_init(struct drm_minor *minor) +{ + struct tinydrm_device *tdev = minor->dev->dev_private; + struct mipi_dbi *mipi = mipi_dbi_from_tinydrm(tdev); + umode_t mode = S_IFREG | S_IWUSR; + + if (mipi->read_commands) + mode |= S_IRUGO; + debugfs_create_file("command", mode, minor->debugfs_root, mipi, + &mipi_dbi_debugfs_command_fops); + + return drm_debugfs_create_files(mipi_dbi_debugfs_list, + ARRAY_SIZE(mipi_dbi_debugfs_list), + minor->debugfs_root, minor); +} +EXPORT_SYMBOL(mipi_dbi_debugfs_init); + +#endif + +MODULE_LICENSE("GPL"); diff --git a/include/drm/tinydrm/ili9341.h b/include/drm/tinydrm/ili9341.h new file mode 100644 index 000000000000..807a09f43cad --- /dev/null +++ b/include/drm/tinydrm/ili9341.h @@ -0,0 +1,54 @@ +/* + * ILI9341 LCD controller + * + * Copyright 2016 Noralf Trønnes + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef __LINUX_ILI9341_H +#define __LINUX_ILI9341_H + +#define ILI9341_FRMCTR1 0xb1 +#define ILI9341_FRMCTR2 0xb2 +#define ILI9341_FRMCTR3 0xb3 +#define ILI9341_INVTR 0xb4 +#define ILI9341_PRCTR 0xb5 +#define ILI9341_DISCTRL 0xb6 +#define ILI9341_ETMOD 0xb7 + +#define ILI9341_PWCTRL1 0xc0 +#define ILI9341_PWCTRL2 0xc1 +#define ILI9341_VMCTRL1 0xc5 +#define ILI9341_VMCTRL2 0xc7 +#define ILI9341_PWCTRLA 0xcb +#define ILI9341_PWCTRLB 0xcf + +#define ILI9341_RDID1 0xda +#define ILI9341_RDID2 0xdb +#define ILI9341_RDID3 0xdc +#define ILI9341_RDID4 0xd3 + +#define ILI9341_PGAMCTRL 0xe0 +#define ILI9341_NGAMCTRL 0xe1 +#define ILI9341_DGAMCTRL1 0xe2 +#define ILI9341_DGAMCTRL2 0xe3 +#define ILI9341_DTCTRLA 0xe8 +#define ILI9341_DTCTRLB 0xea +#define ILI9341_PWRSEQ 0xed + +#define ILI9341_EN3GAM 0xf2 +#define ILI9341_IFCTRL 0xf6 +#define ILI9341_PUMPCTRL 0xf7 + +#define ILI9341_MADCTL_MH BIT(2) +#define ILI9341_MADCTL_BGR BIT(3) +#define ILI9341_MADCTL_ML BIT(4) +#define ILI9341_MADCTL_MV BIT(5) +#define ILI9341_MADCTL_MX BIT(6) +#define ILI9341_MADCTL_MY BIT(7) + +#endif /* __LINUX_ILI9341_H */ diff --git a/include/drm/tinydrm/mipi-dbi.h b/include/drm/tinydrm/mipi-dbi.h new file mode 100644 index 000000000000..d137b16ee873 --- /dev/null +++ b/include/drm/tinydrm/mipi-dbi.h @@ -0,0 +1,107 @@ +/* + * MIPI Display Bus Interface (DBI) LCD controller support + * + * Copyright 2016 Noralf Trønnes + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef __LINUX_MIPI_DBI_H +#define __LINUX_MIPI_DBI_H + +#include <drm/tinydrm/tinydrm.h> + +struct spi_device; +struct gpio_desc; +struct regulator; + +/** + * struct mipi_dbi - MIPI DBI controller + * @tinydrm: tinydrm base + * @spi: SPI device + * @enabled: Pipeline is enabled + * @cmdlock: Command lock + * @command: Bus specific callback executing commands. + * @read_commands: Array of read commands terminated by a zero entry. + * Reading is disabled if this is NULL. + * @dc: Optional D/C gpio. + * @tx_buf: Buffer used for transfer (copy clip rect area) + * @tx_buf9: Buffer used for Option 1 9-bit conversion + * @tx_buf9_len: Size of tx_buf9. + * @swap_bytes: Swap bytes in buffer before transfer + * @reset: Optional reset gpio + * @rotation: initial rotation in degrees Counter Clock Wise + * @backlight: backlight device (optional) + * @regulator: power regulator (optional) + */ +struct mipi_dbi { + struct tinydrm_device tinydrm; + struct spi_device *spi; + bool enabled; + struct mutex cmdlock; + int (*command)(struct mipi_dbi *mipi, u8 cmd, u8 *param, size_t num); + const u8 *read_commands; + struct gpio_desc *dc; + u16 *tx_buf; + void *tx_buf9; + size_t tx_buf9_len; + bool swap_bytes; + struct gpio_desc *reset; + unsigned int rotation; + struct backlight_device *backlight; + struct regulator *regulator; +}; + +static inline struct mipi_dbi * +mipi_dbi_from_tinydrm(struct tinydrm_device *tdev) +{ + return container_of(tdev, struct mipi_dbi, tinydrm); +} + +int mipi_dbi_spi_init(struct spi_device *spi, struct mipi_dbi *mipi, + struct gpio_desc *dc, + const struct drm_simple_display_pipe_funcs *pipe_funcs, + struct drm_driver *driver, + const struct drm_display_mode *mode, + unsigned int rotation); +int mipi_dbi_init(struct device *dev, struct mipi_dbi *mipi, + const struct drm_simple_display_pipe_funcs *pipe_funcs, + struct drm_driver *driver, + const struct drm_display_mode *mode, unsigned int rotation); +void mipi_dbi_pipe_enable(struct drm_simple_display_pipe *pipe, + struct drm_crtc_state *crtc_state); +void mipi_dbi_pipe_disable(struct drm_simple_display_pipe *pipe); +void mipi_dbi_hw_reset(struct mipi_dbi *mipi); +bool mipi_dbi_display_is_on(struct mipi_dbi *mipi); + +int mipi_dbi_command_read(struct mipi_dbi *mipi, u8 cmd, u8 *val); +int mipi_dbi_command_buf(struct mipi_dbi *mipi, u8 cmd, u8 *data, size_t len); + +/** + * mipi_dbi_command - MIPI DCS command with optional parameter(s) + * @mipi: MIPI structure + * @cmd: Command + * @seq...: Optional parameter(s) + * + * Send MIPI DCS command to the controller. Use mipi_dbi_command_read() for + * get/read. + * + * Returns: + * Zero on success, negative error code on failure. + */ +#define mipi_dbi_command(mipi, cmd, seq...) \ +({ \ + u8 d[] = { seq }; \ + mipi_dbi_command_buf(mipi, cmd, d, ARRAY_SIZE(d)); \ +}) + +#ifdef CONFIG_DEBUG_FS +int mipi_dbi_debugfs_init(struct drm_minor *minor); +#else +#define mipi_dbi_debugfs_init NULL +#endif + +#endif /* __LINUX_MIPI_DBI_H */ diff --git a/include/drm/tinydrm/tinydrm-helpers.h b/include/drm/tinydrm/tinydrm-helpers.h new file mode 100644 index 000000000000..78175fe6ab22 --- /dev/null +++ b/include/drm/tinydrm/tinydrm-helpers.h @@ -0,0 +1,100 @@ +/* + * Copyright (C) 2016 Noralf Trønnes + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef __LINUX_TINYDRM_HELPERS_H +#define __LINUX_TINYDRM_HELPERS_H + +struct backlight_device; +struct tinydrm_device; +struct drm_clip_rect; +struct spi_transfer; +struct spi_message; +struct spi_device; +struct device; + +/** + * tinydrm_machine_little_endian - Machine is little endian + * + * Returns: + * true if *defined(__LITTLE_ENDIAN)*, false otherwise + */ +static inline bool tinydrm_machine_little_endian(void) +{ +#if defined(__LITTLE_ENDIAN) + return true; +#else + return false; +#endif +} + +bool tinydrm_merge_clips(struct drm_clip_rect *dst, + struct drm_clip_rect *src, unsigned int num_clips, + unsigned int flags, u32 max_width, u32 max_height); +void tinydrm_memcpy(void *dst, void *vaddr, struct drm_framebuffer *fb, + struct drm_clip_rect *clip); +void tinydrm_swab16(u16 *dst, void *vaddr, struct drm_framebuffer *fb, + struct drm_clip_rect *clip); +void tinydrm_xrgb8888_to_rgb565(u16 *dst, void *vaddr, + struct drm_framebuffer *fb, + struct drm_clip_rect *clip, bool swap); + +#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE +struct backlight_device *tinydrm_of_find_backlight(struct device *dev); +int tinydrm_enable_backlight(struct backlight_device *backlight); +int tinydrm_disable_backlight(struct backlight_device *backlight); +#else +static inline struct backlight_device * +tinydrm_of_find_backlight(struct device *dev) +{ + return NULL; +} + +static inline int tinydrm_enable_backlight(struct backlight_device *backlight) +{ + return 0; +} + +static inline int +tinydrm_disable_backlight(struct backlight_device *backlight) +{ + return 0; +} +#endif + +size_t tinydrm_spi_max_transfer_size(struct spi_device *spi, size_t max_len); +bool tinydrm_spi_bpw_supported(struct spi_device *spi, u8 bpw); +int tinydrm_spi_transfer(struct spi_device *spi, u32 speed_hz, + struct spi_transfer *header, u8 bpw, const void *buf, + size_t len); +void _tinydrm_dbg_spi_message(struct spi_device *spi, struct spi_message *m); + +#ifdef DEBUG +/** + * tinydrm_dbg_spi_message - Dump SPI message + * @spi: SPI device + * @m: SPI message + * + * Dumps info about the transfers in a SPI message including buffer content. + * DEBUG has to be defined for this function to be enabled alongside setting + * the DRM_UT_DRIVER bit of &drm_debug. + */ +static inline void tinydrm_dbg_spi_message(struct spi_device *spi, + struct spi_message *m) +{ + if (drm_debug & DRM_UT_DRIVER) + _tinydrm_dbg_spi_message(spi, m); +} +#else +static inline void tinydrm_dbg_spi_message(struct spi_device *spi, + struct spi_message *m) +{ +} +#endif /* DEBUG */ + +#endif /* __LINUX_TINYDRM_HELPERS_H */ diff --git a/include/drm/tinydrm/tinydrm.h b/include/drm/tinydrm/tinydrm.h new file mode 100644 index 000000000000..cf9ca207b8b1 --- /dev/null +++ b/include/drm/tinydrm/tinydrm.h @@ -0,0 +1,115 @@ +/* + * Copyright (C) 2016 Noralf Trønnes + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef __LINUX_TINYDRM_H +#define __LINUX_TINYDRM_H + +#include <drm/drm_gem_cma_helper.h> +#include <drm/drm_fb_cma_helper.h> +#include <drm/drm_simple_kms_helper.h> + +/** + * struct tinydrm_device - tinydrm device + * @drm: DRM device + * @pipe: Display pipe structure + * @dirty_lock: Serializes framebuffer flushing + * @fbdev_cma: CMA fbdev structure + * @suspend_state: Atomic state when suspended + * @fb_funcs: Framebuffer functions used when creating framebuffers + */ +struct tinydrm_device { + struct drm_device *drm; + struct drm_simple_display_pipe pipe; + struct mutex dirty_lock; + struct drm_fbdev_cma *fbdev_cma; + struct drm_atomic_state *suspend_state; + const struct drm_framebuffer_funcs *fb_funcs; +}; + +static inline struct tinydrm_device * +pipe_to_tinydrm(struct drm_simple_display_pipe *pipe) +{ + return container_of(pipe, struct tinydrm_device, pipe); +} + +/** + * TINYDRM_GEM_DRIVER_OPS - default tinydrm gem operations + * + * This macro provides a shortcut for setting the tinydrm GEM operations in + * the &drm_driver structure. + */ +#define TINYDRM_GEM_DRIVER_OPS \ + .gem_free_object = tinydrm_gem_cma_free_object, \ + .gem_vm_ops = &drm_gem_cma_vm_ops, \ + .prime_handle_to_fd = drm_gem_prime_handle_to_fd, \ + .prime_fd_to_handle = drm_gem_prime_fd_to_handle, \ + .gem_prime_import = drm_gem_prime_import, \ + .gem_prime_export = drm_gem_prime_export, \ + .gem_prime_get_sg_table = drm_gem_cma_prime_get_sg_table, \ + .gem_prime_import_sg_table = tinydrm_gem_cma_prime_import_sg_table, \ + .gem_prime_vmap = drm_gem_cma_prime_vmap, \ + .gem_prime_vunmap = drm_gem_cma_prime_vunmap, \ + .gem_prime_mmap = drm_gem_cma_prime_mmap, \ + .dumb_create = drm_gem_cma_dumb_create, \ + .dumb_map_offset = drm_gem_cma_dumb_map_offset, \ + .dumb_destroy = drm_gem_dumb_destroy, \ + .fops = &tinydrm_fops + +/** + * TINYDRM_MODE - tinydrm display mode + * @hd: Horizontal resolution, width + * @vd: Vertical resolution, height + * @hd_mm: Display width in millimeters + * @vd_mm: Display height in millimeters + * + * This macro creates a &drm_display_mode for use with tinydrm. + */ +#define TINYDRM_MODE(hd, vd, hd_mm, vd_mm) \ + .hdisplay = (hd), \ + .hsync_start = (hd), \ + .hsync_end = (hd), \ + .htotal = (hd), \ + .vdisplay = (vd), \ + .vsync_start = (vd), \ + .vsync_end = (vd), \ + .vtotal = (vd), \ + .width_mm = (hd_mm), \ + .height_mm = (vd_mm), \ + .type = DRM_MODE_TYPE_DRIVER, \ + .clock = 1 /* pass validation */ + +extern const struct file_operations tinydrm_fops; +void tinydrm_lastclose(struct drm_device *drm); +void tinydrm_gem_cma_free_object(struct drm_gem_object *gem_obj); +struct drm_gem_object * +tinydrm_gem_cma_prime_import_sg_table(struct drm_device *drm, + struct dma_buf_attachment *attach, + struct sg_table *sgt); +int devm_tinydrm_init(struct device *parent, struct tinydrm_device *tdev, + const struct drm_framebuffer_funcs *fb_funcs, + struct drm_driver *driver); +int devm_tinydrm_register(struct tinydrm_device *tdev); +void tinydrm_shutdown(struct tinydrm_device *tdev); +int tinydrm_suspend(struct tinydrm_device *tdev); +int tinydrm_resume(struct tinydrm_device *tdev); + +void tinydrm_display_pipe_update(struct drm_simple_display_pipe *pipe, + struct drm_plane_state *old_state); +int tinydrm_display_pipe_prepare_fb(struct drm_simple_display_pipe *pipe, + struct drm_plane_state *plane_state); +int +tinydrm_display_pipe_init(struct tinydrm_device *tdev, + const struct drm_simple_display_pipe_funcs *funcs, + int connector_type, + const uint32_t *formats, + unsigned int format_count, + const struct drm_display_mode *mode, + unsigned int rotation); + +#endif /* __LINUX_TINYDRM_H */ |