diff options
| -rw-r--r-- | Documentation/w1/w1.generic | 4 | ||||
| -rw-r--r-- | drivers/w1/slaves/w1_ds2408.c | 1 | ||||
| -rw-r--r-- | drivers/w1/slaves/w1_ds2413.c | 1 | ||||
| -rw-r--r-- | drivers/w1/slaves/w1_ds2423.c | 1 | ||||
| -rw-r--r-- | drivers/w1/slaves/w1_ds2431.c | 1 | ||||
| -rw-r--r-- | drivers/w1/slaves/w1_ds2433.c | 1 | ||||
| -rw-r--r-- | drivers/w1/slaves/w1_ds2760.c | 1 | ||||
| -rw-r--r-- | drivers/w1/slaves/w1_ds2780.c | 1 | ||||
| -rw-r--r-- | drivers/w1/slaves/w1_ds2781.c | 1 | ||||
| -rw-r--r-- | drivers/w1/slaves/w1_ds28e04.c | 1 | ||||
| -rw-r--r-- | drivers/w1/slaves/w1_smem.c | 2 | ||||
| -rw-r--r-- | drivers/w1/slaves/w1_therm.c | 5 | ||||
| -rw-r--r-- | drivers/w1/w1.c | 2 |
13 files changed, 20 insertions, 2 deletions
diff --git a/Documentation/w1/w1.generic b/Documentation/w1/w1.generic index 212f4ac31c01..a31c5a242973 100644 --- a/Documentation/w1/w1.generic +++ b/Documentation/w1/w1.generic @@ -25,8 +25,8 @@ When a w1 master driver registers with the w1 subsystem, the following occurs: - sysfs entries for that w1 master are created - the w1 bus is periodically searched for new slave devices -When a device is found on the bus, w1 core checks if driver for its family is -loaded. If so, the family driver is attached to the slave. +When a device is found on the bus, w1 core tries to load the driver for its family +and check if it is loaded. If so, the family driver is attached to the slave. If there is no driver for the family, default one is assigned, which allows to perform almost any kind of operations. Each logical operation is a transaction in nature, which can contain several (two or one) low-level operations. diff --git a/drivers/w1/slaves/w1_ds2408.c b/drivers/w1/slaves/w1_ds2408.c index e45eca1044bd..91cc2cdf02c0 100644 --- a/drivers/w1/slaves/w1_ds2408.c +++ b/drivers/w1/slaves/w1_ds2408.c @@ -22,6 +22,7 @@ MODULE_LICENSE("GPL"); MODULE_AUTHOR("Jean-Francois Dagenais <dagenaisj@sonatest.com>"); MODULE_DESCRIPTION("w1 family 29 driver for DS2408 8 Pin IO"); +MODULE_ALIAS("w1-family-" __stringify(W1_FAMILY_DS2408)); #define W1_F29_RETRIES 3 diff --git a/drivers/w1/slaves/w1_ds2413.c b/drivers/w1/slaves/w1_ds2413.c index 829786252c6b..85937773a96a 100644 --- a/drivers/w1/slaves/w1_ds2413.c +++ b/drivers/w1/slaves/w1_ds2413.c @@ -23,6 +23,7 @@ MODULE_LICENSE("GPL"); MODULE_AUTHOR("Mariusz Bialonczyk <manio@skyboo.net>"); MODULE_DESCRIPTION("w1 family 3a driver for DS2413 2 Pin IO"); +MODULE_ALIAS("w1-family-" __stringify(W1_FAMILY_DS2413)); #define W1_F3A_RETRIES 3 #define W1_F3A_FUNC_PIO_ACCESS_READ 0xF5 diff --git a/drivers/w1/slaves/w1_ds2423.c b/drivers/w1/slaves/w1_ds2423.c index 40a10b5ed120..7f86aec74088 100644 --- a/drivers/w1/slaves/w1_ds2423.c +++ b/drivers/w1/slaves/w1_ds2423.c @@ -164,3 +164,4 @@ module_exit(w1_f1d_exit); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Mika Laitio <lamikr@pilppa.org>"); MODULE_DESCRIPTION("w1 family 1d driver for DS2423, 4 counters and 4kb ram"); +MODULE_ALIAS("w1-family-" __stringify(W1_COUNTER_DS2423)); diff --git a/drivers/w1/slaves/w1_ds2431.c b/drivers/w1/slaves/w1_ds2431.c index 984b30331a45..cef8605e43ec 100644 --- a/drivers/w1/slaves/w1_ds2431.c +++ b/drivers/w1/slaves/w1_ds2431.c @@ -310,3 +310,4 @@ module_exit(w1_f2d_fini); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Bernhard Weirich <bernhard.weirich@riedel.net>"); MODULE_DESCRIPTION("w1 family 2d driver for DS2431, 1kb EEPROM"); +MODULE_ALIAS("w1-family-" __stringify(W1_EEPROM_DS2431)); diff --git a/drivers/w1/slaves/w1_ds2433.c b/drivers/w1/slaves/w1_ds2433.c index 85f2cdb27fa2..10cc1b6176e6 100644 --- a/drivers/w1/slaves/w1_ds2433.c +++ b/drivers/w1/slaves/w1_ds2433.c @@ -29,6 +29,7 @@ MODULE_LICENSE("GPL"); MODULE_AUTHOR("Ben Gardner <bgardner@wabtec.com>"); MODULE_DESCRIPTION("w1 family 23 driver for DS2433, 4kb EEPROM"); +MODULE_ALIAS("w1-family-" __stringify(W1_EEPROM_DS2433)); #define W1_EEPROM_SIZE 512 #define W1_PAGE_COUNT 16 diff --git a/drivers/w1/slaves/w1_ds2760.c b/drivers/w1/slaves/w1_ds2760.c index e86a69dc411e..93719d25d849 100644 --- a/drivers/w1/slaves/w1_ds2760.c +++ b/drivers/w1/slaves/w1_ds2760.c @@ -203,3 +203,4 @@ module_exit(w1_ds2760_exit); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Szabolcs Gyurko <szabolcs.gyurko@tlt.hu>"); MODULE_DESCRIPTION("1-wire Driver Dallas 2760 battery monitor chip"); +MODULE_ALIAS("w1-family-" __stringify(W1_FAMILY_DS2760)); diff --git a/drivers/w1/slaves/w1_ds2780.c b/drivers/w1/slaves/w1_ds2780.c index 98ed9c49cf50..0cd7a27b5d6b 100644 --- a/drivers/w1/slaves/w1_ds2780.c +++ b/drivers/w1/slaves/w1_ds2780.c @@ -188,3 +188,4 @@ module_exit(w1_ds2780_exit); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Clifton Barnes <cabarnes@indesign-llc.com>"); MODULE_DESCRIPTION("1-wire Driver for Maxim/Dallas DS2780 Stand-Alone Fuel Gauge IC"); +MODULE_ALIAS("w1-family-" __stringify(W1_FAMILY_DS2780)); diff --git a/drivers/w1/slaves/w1_ds2781.c b/drivers/w1/slaves/w1_ds2781.c index 5140d7be67ab..1aba8e41ad46 100644 --- a/drivers/w1/slaves/w1_ds2781.c +++ b/drivers/w1/slaves/w1_ds2781.c @@ -186,3 +186,4 @@ module_exit(w1_ds2781_exit); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Renata Sayakhova <renata@oktetlabs.ru>"); MODULE_DESCRIPTION("1-wire Driver for Maxim/Dallas DS2781 Stand-Alone Fuel Gauge IC"); +MODULE_ALIAS("w1-family-" __stringify(W1_FAMILY_DS2781)); diff --git a/drivers/w1/slaves/w1_ds28e04.c b/drivers/w1/slaves/w1_ds28e04.c index 98117db595bb..cd30a6d95ea5 100644 --- a/drivers/w1/slaves/w1_ds28e04.c +++ b/drivers/w1/slaves/w1_ds28e04.c @@ -27,6 +27,7 @@ MODULE_LICENSE("GPL"); MODULE_AUTHOR("Markus Franke <franke.m@sebakmt.com>, <franm@hrz.tu-chemnitz.de>"); MODULE_DESCRIPTION("w1 family 1C driver for DS28E04, 4kb EEPROM and PIO"); +MODULE_ALIAS("w1-family-" __stringify(W1_FAMILY_DS28E04)); /* Allow the strong pullup to be disabled, but default to enabled. * If it was disabled a parasite powered device might not get the required diff --git a/drivers/w1/slaves/w1_smem.c b/drivers/w1/slaves/w1_smem.c index 84655625c870..ed4c87506def 100644 --- a/drivers/w1/slaves/w1_smem.c +++ b/drivers/w1/slaves/w1_smem.c @@ -34,6 +34,8 @@ MODULE_LICENSE("GPL"); MODULE_AUTHOR("Evgeniy Polyakov <zbr@ioremap.net>"); MODULE_DESCRIPTION("Driver for 1-wire Dallas network protocol, 64bit memory family."); +MODULE_ALIAS("w1-family-" __stringify(W1_FAMILY_SMEM_01)); +MODULE_ALIAS("w1-family-" __stringify(W1_FAMILY_SMEM_81)); static struct w1_family w1_smem_family_01 = { .fid = W1_FAMILY_SMEM_01, diff --git a/drivers/w1/slaves/w1_therm.c b/drivers/w1/slaves/w1_therm.c index c1a702f8c803..8978360bd387 100644 --- a/drivers/w1/slaves/w1_therm.c +++ b/drivers/w1/slaves/w1_therm.c @@ -36,6 +36,11 @@ MODULE_LICENSE("GPL"); MODULE_AUTHOR("Evgeniy Polyakov <zbr@ioremap.net>"); MODULE_DESCRIPTION("Driver for 1-wire Dallas network protocol, temperature family."); +MODULE_ALIAS("w1-family-" __stringify(W1_THERM_DS18S20)); +MODULE_ALIAS("w1-family-" __stringify(W1_THERM_DS1822)); +MODULE_ALIAS("w1-family-" __stringify(W1_THERM_DS18B20)); +MODULE_ALIAS("w1-family-" __stringify(W1_THERM_DS1825)); +MODULE_ALIAS("w1-family-" __stringify(W1_THERM_DS28EA00)); /* Allow the strong pullup to be disabled, but default to enabled. * If it was disabled a parasite powered device might not get the require diff --git a/drivers/w1/w1.c b/drivers/w1/w1.c index 7ce277d2bb67..0459df843c58 100644 --- a/drivers/w1/w1.c +++ b/drivers/w1/w1.c @@ -680,6 +680,8 @@ static int w1_attach_slave_device(struct w1_master *dev, struct w1_reg_num *rn) atomic_set(&sl->refcnt, 0); init_completion(&sl->released); + request_module("w1-family-0x%0x", rn->family); + spin_lock(&w1_flock); f = w1_family_registered(rn->family); if (!f) { |