diff options
3 files changed, 121 insertions, 0 deletions
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c index 23e6422c2251..f4405d7861b6 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c @@ -5196,6 +5196,48 @@ exit: return err; } +static int brcmf_cfg80211_set_cqm_rssi_range_config(struct wiphy *wiphy, + struct net_device *ndev, + s32 rssi_low, s32 rssi_high) +{ + struct brcmf_cfg80211_vif *vif; + struct brcmf_if *ifp; + int err = 0; + + brcmf_dbg(TRACE, "low=%d high=%d", rssi_low, rssi_high); + + ifp = netdev_priv(ndev); + vif = ifp->vif; + + if (rssi_low != vif->cqm_rssi_low || rssi_high != vif->cqm_rssi_high) { + /* The firmware will send an event when the RSSI is less than or + * equal to a configured level and the previous RSSI event was + * less than or equal to a different level. Set a third level + * so that we also detect the transition from rssi <= rssi_high + * to rssi > rssi_high. + */ + struct brcmf_rssi_event_le config = { + .rate_limit_msec = cpu_to_le32(0), + .rssi_level_num = 3, + .rssi_levels = { + clamp_val(rssi_low, S8_MIN, S8_MAX - 2), + clamp_val(rssi_high, S8_MIN + 1, S8_MAX - 1), + S8_MAX, + }, + }; + + err = brcmf_fil_iovar_data_set(ifp, "rssi_event", &config, + sizeof(config)); + if (err) { + err = -EINVAL; + } else { + vif->cqm_rssi_low = rssi_low; + vif->cqm_rssi_high = rssi_high; + } + } + + return err; +} static int brcmf_cfg80211_cancel_remain_on_channel(struct wiphy *wiphy, @@ -5502,6 +5544,7 @@ static struct cfg80211_ops brcmf_cfg80211_ops = { .update_mgmt_frame_registrations = brcmf_cfg80211_update_mgmt_frame_registrations, .mgmt_tx = brcmf_cfg80211_mgmt_tx, + .set_cqm_rssi_range_config = brcmf_cfg80211_set_cqm_rssi_range_config, .remain_on_channel = brcmf_p2p_remain_on_channel, .cancel_remain_on_channel = brcmf_cfg80211_cancel_remain_on_channel, .get_channel = brcmf_cfg80211_get_channel, @@ -6140,6 +6183,47 @@ brcmf_notify_mic_status(struct brcmf_if *ifp, return 0; } +static s32 brcmf_notify_rssi(struct brcmf_if *ifp, + const struct brcmf_event_msg *e, void *data) +{ + struct brcmf_cfg80211_vif *vif = ifp->vif; + struct brcmf_rssi_be *info = data; + s32 rssi, snr, noise; + s32 low, high, last; + + if (e->datalen < sizeof(*info)) { + brcmf_err("insufficient RSSI event data\n"); + return 0; + } + + rssi = be32_to_cpu(info->rssi); + snr = be32_to_cpu(info->snr); + noise = be32_to_cpu(info->noise); + + low = vif->cqm_rssi_low; + high = vif->cqm_rssi_high; + last = vif->cqm_rssi_last; + + brcmf_dbg(TRACE, "rssi=%d snr=%d noise=%d low=%d high=%d last=%d\n", + rssi, snr, noise, low, high, last); + + vif->cqm_rssi_last = rssi; + + if (rssi <= low || rssi == 0) { + brcmf_dbg(INFO, "LOW rssi=%d\n", rssi); + cfg80211_cqm_rssi_notify(ifp->ndev, + NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW, + rssi, GFP_KERNEL); + } else if (rssi > high) { + brcmf_dbg(INFO, "HIGH rssi=%d\n", rssi); + cfg80211_cqm_rssi_notify(ifp->ndev, + NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH, + rssi, GFP_KERNEL); + } + + return 0; +} + static s32 brcmf_notify_vif_event(struct brcmf_if *ifp, const struct brcmf_event_msg *e, void *data) { @@ -6238,6 +6322,7 @@ static void brcmf_register_event_handlers(struct brcmf_cfg80211_info *cfg) brcmf_p2p_notify_action_tx_complete); brcmf_fweh_register(cfg->pub, BRCMF_E_PSK_SUP, brcmf_notify_connect_status); + brcmf_fweh_register(cfg->pub, BRCMF_E_RSSI, brcmf_notify_rssi); } static void brcmf_deinit_priv_mem(struct brcmf_cfg80211_info *cfg) @@ -7172,6 +7257,8 @@ static int brcmf_setup_wiphy(struct wiphy *wiphy, struct brcmf_if *ifp) wiphy_ext_feature_set(wiphy, NL80211_EXT_FEATURE_DFS_OFFLOAD); + wiphy_ext_feature_set(wiphy, NL80211_EXT_FEATURE_CQM_RSSI_LIST); + wiphy_read_of_freq_limits(wiphy); return 0; diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.h b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.h index 17817cdb5de2..e90a30808c22 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.h +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.h @@ -213,6 +213,9 @@ struct vif_saved_ie { * @list: linked list. * @mgmt_rx_reg: registered rx mgmt frame types. * @mbss: Multiple BSS type, set if not first AP (not relevant for P2P). + * @cqm_rssi_low: Lower RSSI limit for CQM monitoring + * @cqm_rssi_high: Upper RSSI limit for CQM monitoring + * @cqm_rssi_last: Last RSSI reading for CQM monitoring */ struct brcmf_cfg80211_vif { struct brcmf_if *ifp; @@ -224,6 +227,9 @@ struct brcmf_cfg80211_vif { u16 mgmt_rx_reg; bool mbss; int is_11d; + s32 cqm_rssi_low; + s32 cqm_rssi_high; + s32 cqm_rssi_last; }; /* association inform */ diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil_types.h b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil_types.h index 2e31cc10c195..ff2ef557f0ea 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil_types.h +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil_types.h @@ -753,6 +753,34 @@ struct brcmf_assoclist_le { }; /** + * struct brcmf_rssi_be - RSSI threshold event format + * + * @rssi: receive signal strength (in dBm) + * @snr: signal-noise ratio + * @noise: noise (in dBm) + */ +struct brcmf_rssi_be { + __be32 rssi; + __be32 snr; + __be32 noise; +}; + +#define BRCMF_MAX_RSSI_LEVELS 8 + +/** + * struct brcm_rssi_event_le - rssi_event IOVAR format + * + * @rate_limit_msec: RSSI event rate limit + * @rssi_level_num: number of supplied RSSI levels + * @rssi_levels: RSSI levels in ascending order + */ +struct brcmf_rssi_event_le { + __le32 rate_limit_msec; + s8 rssi_level_num; + s8 rssi_levels[BRCMF_MAX_RSSI_LEVELS]; +}; + +/** * struct brcmf_wowl_wakeind_le - Wakeup indicators * Note: note both fields contain same information. * |