diff options
| -rw-r--r-- | arch/powerpc/include/asm/book3s/64/mmu.h | 5 | ||||
| -rw-r--r-- | arch/powerpc/include/asm/mmu_context.h | 6 | ||||
| -rw-r--r-- | arch/powerpc/include/asm/reg_booke.h | 3 | ||||
| -rw-r--r-- | arch/powerpc/mm/Makefile | 2 | ||||
| -rw-r--r-- | arch/powerpc/mm/fault.c | 15 | ||||
| -rw-r--r-- | arch/powerpc/mm/icswx.c | 292 | ||||
| -rw-r--r-- | arch/powerpc/mm/icswx.h | 68 | ||||
| -rw-r--r-- | arch/powerpc/mm/icswx_pid.c | 87 | ||||
| -rw-r--r-- | arch/powerpc/mm/mmu_context_book3s64.c | 18 | ||||
| -rw-r--r-- | arch/powerpc/platforms/Kconfig.cputype | 38 |
10 files changed, 0 insertions, 534 deletions
diff --git a/arch/powerpc/include/asm/book3s/64/mmu.h b/arch/powerpc/include/asm/book3s/64/mmu.h index 77529a3e3811..cbf1945f4338 100644 --- a/arch/powerpc/include/asm/book3s/64/mmu.h +++ b/arch/powerpc/include/asm/book3s/64/mmu.h @@ -96,11 +96,6 @@ typedef struct { #ifdef CONFIG_PPC_SUBPAGE_PROT struct subpage_prot_table spt; #endif /* CONFIG_PPC_SUBPAGE_PROT */ -#ifdef CONFIG_PPC_ICSWX - struct spinlock *cop_lockp; /* guard acop and cop_pid */ - unsigned long acop; /* mask of enabled coprocessor types */ - unsigned int cop_pid; /* pid value used with coprocessors */ -#endif /* CONFIG_PPC_ICSWX */ #ifdef CONFIG_PPC_64K_PAGES /* for 4K PTE fragment support */ void *pte_frag; diff --git a/arch/powerpc/include/asm/mmu_context.h b/arch/powerpc/include/asm/mmu_context.h index da7e9432fa8f..eb749c86dca5 100644 --- a/arch/powerpc/include/asm/mmu_context.h +++ b/arch/powerpc/include/asm/mmu_context.h @@ -96,12 +96,6 @@ static inline void switch_mm_irqs_off(struct mm_struct *prev, if (prev == next) return; -#ifdef CONFIG_PPC_ICSWX - /* Switch coprocessor context only if prev or next uses a coprocessor */ - if (prev->context.acop || next->context.acop) - switch_cop(next); -#endif /* CONFIG_PPC_ICSWX */ - /* We must stop all altivec streams before changing the HW * context */ diff --git a/arch/powerpc/include/asm/reg_booke.h b/arch/powerpc/include/asm/reg_booke.h index 737e012ef56e..eb2a33d5df26 100644 --- a/arch/powerpc/include/asm/reg_booke.h +++ b/arch/powerpc/include/asm/reg_booke.h @@ -221,10 +221,7 @@ #define SPRN_CSRR0 SPRN_SRR2 /* Critical Save and Restore Register 0 */ #define SPRN_CSRR1 SPRN_SRR3 /* Critical Save and Restore Register 1 */ #endif - -#ifdef CONFIG_PPC_ICSWX #define SPRN_HACOP 0x15F /* Hypervisor Available Coprocessor Register */ -#endif /* Bit definitions for CCR1. */ #define CCR1_DPC 0x00000100 /* Disable L1 I-Cache/D-Cache parity checking */ diff --git a/arch/powerpc/mm/Makefile b/arch/powerpc/mm/Makefile index 7414034df1c3..fa6a6ba34355 100644 --- a/arch/powerpc/mm/Makefile +++ b/arch/powerpc/mm/Makefile @@ -22,8 +22,6 @@ ifeq ($(CONFIG_PPC_STD_MMU_64),y) obj-$(CONFIG_PPC_4K_PAGES) += hash64_4k.o obj-$(CONFIG_PPC_64K_PAGES) += hash64_64k.o endif -obj-$(CONFIG_PPC_ICSWX) += icswx.o -obj-$(CONFIG_PPC_ICSWX_PID) += icswx_pid.o obj-$(CONFIG_40x) += 40x_mmu.o obj-$(CONFIG_44x) += 44x_mmu.o obj-$(CONFIG_PPC_8xx) += 8xx_mmu.o diff --git a/arch/powerpc/mm/fault.c b/arch/powerpc/mm/fault.c index 4e1f5e388020..ed902a8fefa8 100644 --- a/arch/powerpc/mm/fault.c +++ b/arch/powerpc/mm/fault.c @@ -45,8 +45,6 @@ #include <asm/siginfo.h> #include <asm/debug.h> -#include "icswx.h" - static inline bool notify_page_fault(struct pt_regs *regs) { bool ret = false; @@ -389,19 +387,6 @@ static int __do_page_fault(struct pt_regs *regs, unsigned long address, int fault, major = 0; bool store_update_sp = false; -#ifdef CONFIG_PPC_ICSWX - /* - * we need to do this early because this "data storage - * interrupt" does not update the DAR/DEAR so we don't want to - * look at it - */ - if (error_code & ICSWX_DSI_UCT) { - int rc = acop_handle_fault(regs, address, error_code); - if (rc) - return rc; - } -#endif /* CONFIG_PPC_ICSWX */ - if (notify_page_fault(regs)) return 0; diff --git a/arch/powerpc/mm/icswx.c b/arch/powerpc/mm/icswx.c deleted file mode 100644 index 1fa794d7d59f..000000000000 --- a/arch/powerpc/mm/icswx.c +++ /dev/null @@ -1,292 +0,0 @@ -/* - * ICSWX and ACOP Management - * - * Copyright (C) 2011 Anton Blanchard, IBM Corp. <anton@samba.org> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - */ - -#include <linux/sched.h> -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/types.h> -#include <linux/mm.h> -#include <linux/spinlock.h> -#include <linux/module.h> -#include <linux/uaccess.h> - -#include "icswx.h" - -/* - * The processor and its L2 cache cause the icswx instruction to - * generate a COP_REQ transaction on PowerBus. The transaction has no - * address, and the processor does not perform an MMU access to - * authenticate the transaction. The command portion of the PowerBus - * COP_REQ transaction includes the LPAR_ID (LPID) and the coprocessor - * Process ID (PID), which the coprocessor compares to the authorized - * LPID and PID held in the coprocessor, to determine if the process - * is authorized to generate the transaction. The data of the COP_REQ - * transaction is 128-byte or less in size and is placed in cacheable - * memory on a 128-byte cache line boundary. - * - * The task to use a coprocessor should use use_cop() to mark the use - * of the Coprocessor Type (CT) and context switching. On a server - * class processor, the PID register is used only for coprocessor - * management + * and so a coprocessor PID is allocated before - * executing icswx + * instruction. Drop_cop() is used to free the - * coprocessor PID. - * - * Example: - * Host Fabric Interface (HFI) is a PowerPC network coprocessor. - * Each HFI have multiple windows. Each HFI window serves as a - * network device sending to and receiving from HFI network. - * HFI immediate send function uses icswx instruction. The immediate - * send function allows small (single cache-line) packets be sent - * without using the regular HFI send FIFO and doorbell, which are - * much slower than immediate send. - * - * For each task intending to use HFI immediate send, the HFI driver - * calls use_cop() to obtain a coprocessor PID for the task. - * The HFI driver then allocate a free HFI window and save the - * coprocessor PID to the HFI window to allow the task to use the - * HFI window. - * - * The HFI driver repeatedly creates immediate send packets and - * issues icswx instruction to send data through the HFI window. - * The HFI compares the coprocessor PID in the CPU PID register - * to the PID held in the HFI window to determine if the transaction - * is allowed. - * - * When the task to release the HFI window, the HFI driver calls - * drop_cop() to release the coprocessor PID. - */ - -void switch_cop(struct mm_struct *next) -{ -#ifdef CONFIG_PPC_ICSWX_PID - mtspr(SPRN_PID, next->context.cop_pid); -#endif - mtspr(SPRN_ACOP, next->context.acop); -} - -/** - * Start using a coprocessor. - * @acop: mask of coprocessor to be used. - * @mm: The mm the coprocessor to associate with. Most likely current mm. - * - * Return a positive PID if successful. Negative errno otherwise. - * The returned PID will be fed to the coprocessor to determine if an - * icswx transaction is authenticated. - */ -int use_cop(unsigned long acop, struct mm_struct *mm) -{ - int ret; - - if (!cpu_has_feature(CPU_FTR_ICSWX)) - return -ENODEV; - - if (!mm || !acop) - return -EINVAL; - - /* The page_table_lock ensures mm_users won't change under us */ - spin_lock(&mm->page_table_lock); - spin_lock(mm->context.cop_lockp); - - ret = get_cop_pid(mm); - if (ret < 0) - goto out; - - /* update acop */ - mm->context.acop |= acop; - - sync_cop(mm); - - /* - * If this is a threaded process then there might be other threads - * running. We need to send an IPI to force them to pick up any - * change in PID and ACOP. - */ - if (atomic_read(&mm->mm_users) > 1) - smp_call_function(sync_cop, mm, 1); - -out: - spin_unlock(mm->context.cop_lockp); - spin_unlock(&mm->page_table_lock); - - return ret; -} -EXPORT_SYMBOL_GPL(use_cop); - -/** - * Stop using a coprocessor. - * @acop: mask of coprocessor to be stopped. - * @mm: The mm the coprocessor associated with. - */ -void drop_cop(unsigned long acop, struct mm_struct *mm) -{ - int free_pid; - - if (!cpu_has_feature(CPU_FTR_ICSWX)) - return; - - if (WARN_ON_ONCE(!mm)) - return; - - /* The page_table_lock ensures mm_users won't change under us */ - spin_lock(&mm->page_table_lock); - spin_lock(mm->context.cop_lockp); - - mm->context.acop &= ~acop; - - free_pid = disable_cop_pid(mm); - sync_cop(mm); - - /* - * If this is a threaded process then there might be other threads - * running. We need to send an IPI to force them to pick up any - * change in PID and ACOP. - */ - if (atomic_read(&mm->mm_users) > 1) - smp_call_function(sync_cop, mm, 1); - - if (free_pid != COP_PID_NONE) - free_cop_pid(free_pid); - - spin_unlock(mm->context.cop_lockp); - spin_unlock(&mm->page_table_lock); -} -EXPORT_SYMBOL_GPL(drop_cop); - -static int acop_use_cop(int ct) -{ - /* There is no alternate policy, yet */ - return -1; -} - -/* - * Get the instruction word at the NIP - */ -static u32 acop_get_inst(struct pt_regs *regs) -{ - u32 inst; - u32 __user *p; - - p = (u32 __user *)regs->nip; - if (!access_ok(VERIFY_READ, p, sizeof(*p))) - return 0; - - if (__get_user(inst, p)) - return 0; - - return inst; -} - -/** - * @regs: registers at time of interrupt - * @address: storage address - * @error_code: Fault code, usually the DSISR or ESR depending on - * processor type - * - * Return 0 if we are able to resolve the data storage fault that - * results from a CT miss in the ACOP register. - */ -int acop_handle_fault(struct pt_regs *regs, unsigned long address, - unsigned long error_code) -{ - int ct; - u32 inst = 0; - - if (!cpu_has_feature(CPU_FTR_ICSWX)) { - pr_info("No coprocessors available"); - _exception(SIGILL, regs, ILL_ILLOPN, address); - } - - if (!user_mode(regs)) { - /* this could happen if the HV denies the - * kernel access, for now we just die */ - die("ICSWX from kernel failed", regs, SIGSEGV); - } - - /* Some implementations leave us a hint for the CT */ - ct = ICSWX_GET_CT_HINT(error_code); - if (ct < 0) { - /* we have to peek at the instruction word to figure out CT */ - u32 ccw; - u32 rs; - - inst = acop_get_inst(regs); - if (inst == 0) - return -1; - - rs = (inst >> (31 - 10)) & 0x1f; - ccw = regs->gpr[rs]; - ct = (ccw >> 16) & 0x3f; - } - - /* - * We could be here because another thread has enabled acop - * but the ACOP register has yet to be updated. - * - * This should have been taken care of by the IPI to sync all - * the threads (see smp_call_function(sync_cop, mm, 1)), but - * that could take forever if there are a significant amount - * of threads. - * - * Given the number of threads on some of these systems, - * perhaps this is the best way to sync ACOP rather than whack - * every thread with an IPI. - */ - if ((acop_copro_type_bit(ct) & current->active_mm->context.acop) != 0) { - sync_cop(current->active_mm); - return 0; - } - - /* check for alternate policy */ - if (!acop_use_cop(ct)) - return 0; - - /* at this point the CT is unknown to the system */ - pr_warn("%s[%d]: Coprocessor %d is unavailable\n", - current->comm, current->pid, ct); - - /* get inst if we don't already have it */ - if (inst == 0) { - inst = acop_get_inst(regs); - if (inst == 0) - return -1; - } - - /* Check if the instruction is the "record form" */ - if (inst & 1) { - /* - * the instruction is "record" form so we can reject - * using CR0 - */ - regs->ccr &= ~(0xful << 28); - regs->ccr |= ICSWX_RC_NOT_FOUND << 28; - - /* Move on to the next instruction */ - regs->nip += 4; - } else { - /* - * There is no architected mechanism to report a bad - * CT so we could either SIGILL or report nothing. - * Since the non-record version should only bu used - * for "hints" or "don't care" we should probably do - * nothing. However, I could see how some people - * might want an SIGILL so it here if you want it. - */ -#ifdef CONFIG_PPC_ICSWX_USE_SIGILL - _exception(SIGILL, regs, ILL_ILLOPN, address); -#else - regs->nip += 4; -#endif - } - - return 0; -} -EXPORT_SYMBOL_GPL(acop_handle_fault); diff --git a/arch/powerpc/mm/icswx.h b/arch/powerpc/mm/icswx.h deleted file mode 100644 index 6dedc08e62c8..000000000000 --- a/arch/powerpc/mm/icswx.h +++ /dev/null @@ -1,68 +0,0 @@ -#ifndef _ARCH_POWERPC_MM_ICSWX_H_ -#define _ARCH_POWERPC_MM_ICSWX_H_ - -/* - * ICSWX and ACOP Management - * - * Copyright (C) 2011 Anton Blanchard, IBM Corp. <anton@samba.org> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - */ - -#include <asm/mmu_context.h> - -/* also used to denote that PIDs are not used */ -#define COP_PID_NONE 0 - -static inline void sync_cop(void *arg) -{ - struct mm_struct *mm = arg; - - if (mm == current->active_mm) - switch_cop(current->active_mm); -} - -#ifdef CONFIG_PPC_ICSWX_PID -extern int get_cop_pid(struct mm_struct *mm); -extern int disable_cop_pid(struct mm_struct *mm); -extern void free_cop_pid(int free_pid); -#else -#define get_cop_pid(m) (COP_PID_NONE) -#define disable_cop_pid(m) (COP_PID_NONE) -#define free_cop_pid(p) -#endif - -/* - * These are implementation bits for architected registers. If this - * ever becomes architecture the should be moved to reg.h et. al. - */ -/* UCT is the same bit for Server and Embedded */ -#define ICSWX_DSI_UCT 0x00004000 /* Unavailable Coprocessor Type */ - -#ifdef CONFIG_PPC_BOOK3E -/* Embedded implementation gives us no hints as to what the CT is */ -#define ICSWX_GET_CT_HINT(x) (-1) -#else -/* Server implementation contains the CT value in the DSISR */ -#define ICSWX_DSISR_CTMASK 0x00003f00 -#define ICSWX_GET_CT_HINT(x) (((x) & ICSWX_DSISR_CTMASK) >> 8) -#endif - -#define ICSWX_RC_STARTED 0x8 /* The request has been started */ -#define ICSWX_RC_NOT_IDLE 0x4 /* No coprocessor found idle */ -#define ICSWX_RC_NOT_FOUND 0x2 /* No coprocessor found */ -#define ICSWX_RC_UNDEFINED 0x1 /* Reserved */ - -extern int acop_handle_fault(struct pt_regs *regs, unsigned long address, - unsigned long error_code); - -static inline u64 acop_copro_type_bit(unsigned int type) -{ - return 1ULL << (63 - type); -} - -#endif /* !_ARCH_POWERPC_MM_ICSWX_H_ */ diff --git a/arch/powerpc/mm/icswx_pid.c b/arch/powerpc/mm/icswx_pid.c deleted file mode 100644 index 91e30eb7d054..000000000000 --- a/arch/powerpc/mm/icswx_pid.c +++ /dev/null @@ -1,87 +0,0 @@ -/* - * ICSWX and ACOP/PID Management - * - * Copyright (C) 2011 Anton Blanchard, IBM Corp. <anton@samba.org> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - */ - -#include <linux/sched.h> -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/types.h> -#include <linux/mm.h> -#include <linux/spinlock.h> -#include <linux/idr.h> -#include <linux/module.h> -#include "icswx.h" - -#define COP_PID_MIN (COP_PID_NONE + 1) -#define COP_PID_MAX (0xFFFF) - -static DEFINE_SPINLOCK(mmu_context_acop_lock); -static DEFINE_IDA(cop_ida); - -static int new_cop_pid(struct ida *ida, int min_id, int max_id, - spinlock_t *lock) -{ - int index; - int err; - -again: - if (!ida_pre_get(ida, GFP_KERNEL)) - return -ENOMEM; - - spin_lock(lock); - err = ida_get_new_above(ida, min_id, &index); - spin_unlock(lock); - - if (err == -EAGAIN) - goto again; - else if (err) - return err; - - if (index > max_id) { - spin_lock(lock); - ida_remove(ida, index); - spin_unlock(lock); - return -ENOMEM; - } - - return index; -} - -int get_cop_pid(struct mm_struct *mm) -{ - int pid; - - if (mm->context.cop_pid == COP_PID_NONE) { - pid = new_cop_pid(&cop_ida, COP_PID_MIN, COP_PID_MAX, - &mmu_context_acop_lock); - if (pid >= 0) - mm->context.cop_pid = pid; - } - return mm->context.cop_pid; -} - -int disable_cop_pid(struct mm_struct *mm) -{ - int free_pid = COP_PID_NONE; - - if ((!mm->context.acop) && (mm->context.cop_pid != COP_PID_NONE)) { - free_pid = mm->context.cop_pid; - mm->context.cop_pid = COP_PID_NONE; - } - return free_pid; -} - -void free_cop_pid(int free_pid) -{ - spin_lock(&mmu_context_acop_lock); - ida_remove(&cop_ida, free_pid); - spin_unlock(&mmu_context_acop_lock); -} diff --git a/arch/powerpc/mm/mmu_context_book3s64.c b/arch/powerpc/mm/mmu_context_book3s64.c index abed1fe6992f..db9d8cb0f8ee 100644 --- a/arch/powerpc/mm/mmu_context_book3s64.c +++ b/arch/powerpc/mm/mmu_context_book3s64.c @@ -25,8 +25,6 @@ #include <asm/mmu_context.h> #include <asm/pgalloc.h> -#include "icswx.h" - static DEFINE_SPINLOCK(mmu_context_lock); static DEFINE_IDA(mmu_context_ida); @@ -164,16 +162,6 @@ int init_new_context(struct task_struct *tsk, struct mm_struct *mm) return index; mm->context.id = index; -#ifdef CONFIG_PPC_ICSWX - mm->context.cop_lockp = kmalloc(sizeof(spinlock_t), GFP_KERNEL); - if (!mm->context.cop_lockp) { - __destroy_context(index); - subpage_prot_free(mm); - mm->context.id = MMU_NO_CONTEXT; - return -ENOMEM; - } - spin_lock_init(mm->context.cop_lockp); -#endif /* CONFIG_PPC_ICSWX */ #ifdef CONFIG_PPC_64K_PAGES mm->context.pte_frag = NULL; @@ -225,12 +213,6 @@ void destroy_context(struct mm_struct *mm) #ifdef CONFIG_SPAPR_TCE_IOMMU WARN_ON_ONCE(!list_empty(&mm->context.iommu_group_mem_list)); #endif -#ifdef CONFIG_PPC_ICSWX - drop_cop(mm->context.acop, mm); - kfree(mm->context.cop_lockp); - mm->context.cop_lockp = NULL; -#endif /* CONFIG_PPC_ICSWX */ - if (radix_enabled()) { /* * Radix doesn't have a valid bit in the process table diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype index 2f629e0551e9..9539620a48d4 100644 --- a/arch/powerpc/platforms/Kconfig.cputype +++ b/arch/powerpc/platforms/Kconfig.cputype @@ -271,44 +271,6 @@ config VSX If in doubt, say Y here. -config PPC_ICSWX - bool "Support for PowerPC icswx coprocessor instruction" - depends on PPC_BOOK3S_64 - default n - ---help--- - - This option enables kernel support for the PowerPC Initiate - Coprocessor Store Word (icswx) coprocessor instruction on POWER7 - and POWER8 processors. POWER9 uses new copy/paste instructions - to invoke the coprocessor. - - This option is only useful if you have a processor that supports - the icswx coprocessor instruction. It does not have any effect - on processors without the icswx coprocessor instruction. - - This option slightly increases kernel memory usage. - - If in doubt, say N here. - -config PPC_ICSWX_PID - bool "icswx requires direct PID management" - depends on PPC_ICSWX - default y - ---help--- - The PID register in server is used explicitly for ICSWX. In - embedded systems PID management is done by the system. - -config PPC_ICSWX_USE_SIGILL - bool "Should a bad CT cause a SIGILL?" - depends on PPC_ICSWX - default n - ---help--- - Should a bad CT used for "non-record form ICSWX" cause an - illegal instruction signal or should it be silent as - architected. - - If in doubt, say N here. - config SPE_POSSIBLE def_bool y depends on E200 || (E500 && !PPC_E500MC) |