diff options
96 files changed, 222 insertions, 436 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 4c445fb9c189..9ec5f5588dc5 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -327,7 +327,6 @@ choice config ARCH_MULTIPLATFORM bool "Allow multiple platforms to be selected" depends on MMU - select ARCH_WANT_OPTIONAL_GPIOLIB select ARM_HAS_SG_CHAIN select ARM_PATCH_PHYS_VIRT select AUTO_ZRELADDR @@ -342,7 +341,6 @@ config ARCH_MULTIPLATFORM config ARM_SINGLE_ARMV7M bool "ARMv7-M based platforms (Cortex-M0/M3/M4)" depends on !MMU - select ARCH_WANT_OPTIONAL_GPIOLIB select ARM_NVIC select AUTO_ZRELADDR select CLKSRC_OF @@ -356,12 +354,12 @@ config ARM_SINGLE_ARMV7M config ARCH_CLPS711X bool "Cirrus Logic CLPS711x/EP721x/EP731x-based" - select ARCH_REQUIRE_GPIOLIB select AUTO_ZRELADDR select COMMON_CLK select CPU_ARM720T select GENERIC_CLOCKEVENTS select CLPS711X_TIMER + select GPIOLIB select MFD_SYSCON select SOC_BUS help @@ -369,10 +367,10 @@ config ARCH_CLPS711X config ARCH_GEMINI bool "Cortina Systems Gemini" - select ARCH_REQUIRE_GPIOLIB select CLKSRC_MMIO select CPU_FA526 select GENERIC_CLOCKEVENTS + select GPIOLIB help Support for the Cortina Systems Gemini family SoCs @@ -393,7 +391,6 @@ config ARCH_EBSA110 config ARCH_EP93XX bool "EP93xx-based" select ARCH_HAS_HOLES_MEMORYMODEL - select ARCH_REQUIRE_GPIOLIB select ARM_AMBA select ARM_PATCH_PHYS_VIRT select ARM_VIC @@ -402,6 +399,7 @@ config ARCH_EP93XX select CLKSRC_MMIO select CPU_ARM920T select GENERIC_CLOCKEVENTS + select GPIOLIB help This enables support for the Cirrus EP93xx series of CPUs. @@ -442,9 +440,9 @@ config ARCH_IOP13XX config ARCH_IOP32X bool "IOP32x-based" depends on MMU - select ARCH_REQUIRE_GPIOLIB select CPU_XSCALE select GPIO_IOP + select GPIOLIB select NEED_RET_TO_USER select PCI select PLAT_IOP @@ -455,9 +453,9 @@ config ARCH_IOP32X config ARCH_IOP33X bool "IOP33x-based" depends on MMU - select ARCH_REQUIRE_GPIOLIB select CPU_XSCALE select GPIO_IOP + select GPIOLIB select NEED_RET_TO_USER select PCI select PLAT_IOP @@ -468,12 +466,12 @@ config ARCH_IXP4XX bool "IXP4xx-based" depends on MMU select ARCH_HAS_DMA_SET_COHERENT_MASK - select ARCH_REQUIRE_GPIOLIB select ARCH_SUPPORTS_BIG_ENDIAN select CLKSRC_MMIO select CPU_XSCALE select DMABOUNCE if PCI select GENERIC_CLOCKEVENTS + select GPIOLIB select MIGHT_HAVE_PCI select NEED_MACH_IO_H select USB_EHCI_BIG_ENDIAN_DESC @@ -483,9 +481,9 @@ config ARCH_IXP4XX config ARCH_DOVE bool "Marvell Dove" - select ARCH_REQUIRE_GPIOLIB select CPU_PJ4 select GENERIC_CLOCKEVENTS + select GPIOLIB select MIGHT_HAVE_PCI select MULTI_IRQ_HANDLER select MVEBU_MBUS @@ -499,10 +497,10 @@ config ARCH_DOVE config ARCH_KS8695 bool "Micrel/Kendin KS8695" - select ARCH_REQUIRE_GPIOLIB select CLKSRC_MMIO select CPU_ARM922T select GENERIC_CLOCKEVENTS + select GPIOLIB select NEED_MACH_MEMORY_H help Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based @@ -510,11 +508,11 @@ config ARCH_KS8695 config ARCH_W90X900 bool "Nuvoton W90X900 CPU" - select ARCH_REQUIRE_GPIOLIB select CLKDEV_LOOKUP select CLKSRC_MMIO select CPU_ARM926T select GENERIC_CLOCKEVENTS + select GPIOLIB help Support for Nuvoton (Winbond logic dept.) ARM9 processor, At present, the w90x900 has been renamed nuc900, regarding @@ -526,13 +524,13 @@ config ARCH_W90X900 config ARCH_LPC32XX bool "NXP LPC32XX" - select ARCH_REQUIRE_GPIOLIB select ARM_AMBA select CLKDEV_LOOKUP select CLKSRC_LPC32XX select COMMON_CLK select CPU_ARM926T select GENERIC_CLOCKEVENTS + select GPIOLIB select MULTI_IRQ_HANDLER select SPARSE_IRQ select USE_OF @@ -543,7 +541,6 @@ config ARCH_PXA bool "PXA2xx/PXA3xx-based" depends on MMU select ARCH_MTD_XIP - select ARCH_REQUIRE_GPIOLIB select ARM_CPU_SUSPEND if PM select AUTO_ZRELADDR select COMMON_CLK @@ -554,6 +551,7 @@ config ARCH_PXA select CPU_XSCALE if !CPU_XSC3 select GENERIC_CLOCKEVENTS select GPIO_PXA + select GPIOLIB select HAVE_IDE select IRQ_DOMAIN select MULTI_IRQ_HANDLER @@ -584,7 +582,6 @@ config ARCH_RPC config ARCH_SA1100 bool "SA1100-based" select ARCH_MTD_XIP - select ARCH_REQUIRE_GPIOLIB select ARCH_SPARSEMEM_ENABLE select CLKDEV_LOOKUP select CLKSRC_MMIO @@ -593,6 +590,7 @@ config ARCH_SA1100 select CPU_FREQ select CPU_SA1100 select GENERIC_CLOCKEVENTS + select GPIOLIB select HAVE_IDE select IRQ_DOMAIN select ISA @@ -604,12 +602,12 @@ config ARCH_SA1100 config ARCH_S3C24XX bool "Samsung S3C24XX SoCs" - select ARCH_REQUIRE_GPIOLIB select ATAGS select CLKDEV_LOOKUP select CLKSRC_SAMSUNG_PWM select GENERIC_CLOCKEVENTS select GPIO_SAMSUNG + select GPIOLIB select HAVE_S3C2410_I2C if I2C select HAVE_S3C2410_WATCHDOG if WATCHDOG select HAVE_S3C_RTC if RTC_CLASS @@ -625,12 +623,12 @@ config ARCH_S3C24XX config ARCH_DAVINCI bool "TI DaVinci" select ARCH_HAS_HOLES_MEMORYMODEL - select ARCH_REQUIRE_GPIOLIB select CLKDEV_LOOKUP select CPU_ARM926T select GENERIC_ALLOCATOR select GENERIC_CLOCKEVENTS select GENERIC_IRQ_CHIP + select GPIOLIB select HAVE_IDE select USE_OF select ZONE_DMA @@ -642,11 +640,11 @@ config ARCH_OMAP1 depends on MMU select ARCH_HAS_HOLES_MEMORYMODEL select ARCH_OMAP - select ARCH_REQUIRE_GPIOLIB select CLKDEV_LOOKUP select CLKSRC_MMIO select GENERIC_CLOCKEVENTS select GENERIC_IRQ_CHIP + select GPIOLIB select HAVE_IDE select IRQ_DOMAIN select MULTI_IRQ_HANDLER @@ -868,7 +866,7 @@ source "arch/arm/mach-zynq/Kconfig" config ARCH_EFM32 bool "Energy Micro efm32" depends on ARM_SINGLE_ARMV7M - select ARCH_REQUIRE_GPIOLIB + select GPIOLIB help Support for Energy Micro's (now Silicon Labs) efm32 Giant Gecko processors. @@ -901,7 +899,7 @@ config MACH_STM32F429 default y config ARCH_MPS2 - bool "ARM MPS2 paltform" + bool "ARM MPS2 platform" depends on ARM_SINGLE_ARMV7M select ARM_AMBA select CLKSRC_MPS2 diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 08047afdf38e..5204395efda8 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -1,8 +1,8 @@ menuconfig ARCH_AT91 bool "Atmel SoCs" depends on ARCH_MULTI_V4T || ARCH_MULTI_V5 || ARCH_MULTI_V7 - select ARCH_REQUIRE_GPIOLIB select COMMON_CLK_AT91 + select GPIOLIB select PINCTRL select SOC_BUS diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig index 4f1709b31822..5f63f513d9c9 100644 --- a/arch/arm/mach-bcm/Kconfig +++ b/arch/arm/mach-bcm/Kconfig @@ -17,7 +17,7 @@ config ARCH_BCM_IPROC select ARM_GLOBAL_TIMER select COMMON_CLK_IPROC select CLKSRC_MMIO - select ARCH_REQUIRE_GPIOLIB + select GPIOLIB select ARM_AMBA select PINCTRL help @@ -80,7 +80,7 @@ comment "KONA architected SoCs" config ARCH_BCM_MOBILE bool - select ARCH_REQUIRE_GPIOLIB + select GPIOLIB select ARM_ERRATA_754322 select ARM_ERRATA_775420 select ARM_GIC @@ -138,7 +138,7 @@ comment "Other Architectures" config ARCH_BCM2835 bool "Broadcom BCM2835 family" depends on ARCH_MULTI_V6 || ARCH_MULTI_V7 - select ARCH_REQUIRE_GPIOLIB + select GPIOLIB select ARM_AMBA select ARM_ERRATA_411920 if ARCH_MULTI_V6 select ARM_TIMER_SP804 @@ -178,7 +178,6 @@ config ARCH_BRCMSTB select BRCMSTB_L2_IRQ select BCM7120_L2_IRQ select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE - select ARCH_WANT_OPTIONAL_GPIOLIB select SOC_BRCMSTB select SOC_BUS help diff --git a/arch/arm/mach-berlin/Kconfig b/arch/arm/mach-berlin/Kconfig index ffbfa0bd091b..63ab1d368625 100644 --- a/arch/arm/mach-berlin/Kconfig +++ b/arch/arm/mach-berlin/Kconfig @@ -2,11 +2,11 @@ menuconfig ARCH_BERLIN bool "Marvell Berlin SoCs" depends on ARCH_MULTI_V7 select ARCH_HAS_RESET_CONTROLLER - select ARCH_REQUIRE_GPIOLIB select ARM_GIC select DW_APB_ICTL select DW_APB_TIMER_OF select GENERIC_IRQ_CHIP + select GPIOLIB select MFD_SYSCON select PINCTRL diff --git a/arch/arm/mach-digicolor/Kconfig b/arch/arm/mach-digicolor/Kconfig index fc65b0f1db48..9d05c6c4181d 100644 --- a/arch/arm/mach-digicolor/Kconfig +++ b/arch/arm/mach-digicolor/Kconfig @@ -1,10 +1,10 @@ config ARCH_DIGICOLOR bool "Conexant Digicolor SoC Support" depends on ARCH_MULTI_V7 - select ARCH_REQUIRE_GPIOLIB select CLKSRC_MMIO select DIGICOLOR_TIMER select GENERIC_IRQ_CHIP + select GPIOLIB select MFD_SYSCON select PINCTRL select PINCTRL_DIGICOLOR diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index 20dcf6e904b2..ecf139f31c4c 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -12,13 +12,13 @@ menuconfig ARCH_EXYNOS depends on ARCH_MULTI_V7 select ARCH_HAS_BANDGAP select ARCH_HAS_HOLES_MEMORYMODEL - select ARCH_REQUIRE_GPIOLIB select ARM_AMBA select ARM_GIC select COMMON_CLK_SAMSUNG select EXYNOS_THERMAL select EXYNOS_PMU select EXYNOS_SROM + select GPIOLIB select HAVE_ARM_SCU if SMP select HAVE_S3C2410_I2C if I2C select HAVE_S3C2410_WATCHDOG if WATCHDOG diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index dd905b9602a0..ee9a318cab31 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -1,10 +1,10 @@ menuconfig ARCH_MXC bool "Freescale i.MX family" depends on ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7 || ARM_SINGLE_ARMV7M - select ARCH_REQUIRE_GPIOLIB select ARCH_SUPPORTS_BIG_ENDIAN select CLKSRC_IMX_GPT select GENERIC_IRQ_CHIP + select GPIOLIB select PINCTRL select PM_OPP if PM select SOC_BUS @@ -44,9 +44,6 @@ config MXC_USE_EPIT uses the same clocks as the GPT. Anyway, on some systems the GPT may be in use for other purposes. -config ARCH_HAS_RNGA - bool - config HAVE_IMX_ANATOP bool @@ -90,7 +87,6 @@ config SOC_IMX27 config SOC_IMX31 bool select CPU_V6 - select IMX_HAVE_PLATFORM_MXC_RNGA select MXC_AVIC select SMP_ON_UP if SMP diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index 9fbe624a5ef9..9f5fffd62702 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -8,8 +8,8 @@ obj-$(CONFIG_SOC_IMX25) += cpu-imx25.o mach-imx25.o pm-imx25.o obj-$(CONFIG_SOC_IMX27) += cpu-imx27.o pm-imx27.o obj-$(CONFIG_SOC_IMX27) += mm-imx27.o ehci-imx27.o -obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o iomux-imx31.o ehci-imx31.o pm-imx3.o -obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o ehci-imx35.o pm-imx3.o +obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o iomux-imx31.o ehci-imx31.o +obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o ehci-imx35.o imx5-pm-$(CONFIG_PM) += pm-imx5.o obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o $(imx5-pm-y) diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h index 58a38464480d..a8f469333027 100644 --- a/arch/arm/mach-imx/common.h +++ b/arch/arm/mach-imx/common.h @@ -32,7 +32,6 @@ void imx27_init_early(void); void imx31_init_early(void); void imx35_init_early(void); void mxc_init_irq(void __iomem *); -void tzic_init_irq(void); void mx1_init_irq(void); void mx21_init_irq(void); void mx27_init_irq(void); @@ -55,6 +54,7 @@ struct platform_device *mxc_register_gpio(char *name, int id, void mxc_set_cpu_type(unsigned int type); void mxc_restart(enum reboot_mode, const char *); void mxc_arch_reset_init(void __iomem *); +void imx1_reset_init(void __iomem *); void imx_set_aips(void __iomem *); void imx_aips_allow_unprivileged_access(const char *compat); int mxc_device_init(void); @@ -67,6 +67,7 @@ void imx_gpc_set_arm_power_in_lpm(bool power_off); void imx_gpc_set_arm_power_up_timing(u32 sw2iso, u32 sw); void imx_gpc_set_arm_power_down_timing(u32 sw2iso, u32 sw); void imx25_pm_init(void); +void imx27_pm_init(void); enum mxc_cpu_pwr_mode { WAIT_CLOCKED, /* wfi only */ diff --git a/arch/arm/mach-imx/cpu-imx5.c b/arch/arm/mach-imx/cpu-imx5.c index 3403bac94a31..4f2d1c772f85 100644 --- a/arch/arm/mach-imx/cpu-imx5.c +++ b/arch/arm/mach-imx/cpu-imx5.c @@ -60,13 +60,9 @@ static int get_mx51_srev(void) /* * Returns: * the silicon revision of the cpu - * -EINVAL - not a mx51 */ int mx51_revision(void) { - if (!cpu_is_mx51()) - return -EINVAL; - if (mx5_cpu_rev == -1) mx5_cpu_rev = get_mx51_srev(); @@ -112,13 +108,9 @@ static int get_mx53_srev(void) /* * Returns: * the silicon revision of the cpu - * -EINVAL - not a mx53 */ int mx53_revision(void) { - if (!cpu_is_mx53()) - return -EINVAL; - if (mx5_cpu_rev == -1) mx5_cpu_rev = get_mx53_srev(); diff --git a/arch/arm/mach-imx/cpu.c b/arch/arm/mach-imx/cpu.c index 6a96b7cf468f..b3347d32349f 100644 --- a/arch/arm/mach-imx/cpu.c +++ b/arch/arm/mach-imx/cpu.c @@ -10,8 +10,6 @@ #include "common.h" unsigned int __mxc_cpu_type; -EXPORT_SYMBOL(__mxc_cpu_type); - static unsigned int imx_soc_revision; void mxc_set_cpu_type(unsigned int type) diff --git a/arch/arm/mach-imx/devices/Kconfig b/arch/arm/mach-imx/devices/Kconfig index 3a552989248e..6ffe57267233 100644 --- a/arch/arm/mach-imx/devices/Kconfig +++ b/arch/arm/mach-imx/devices/Kconfig @@ -57,10 +57,6 @@ config IMX_HAVE_PLATFORM_MXC_MMC config IMX_HAVE_PLATFORM_MXC_NAND bool -config IMX_HAVE_PLATFORM_MXC_RNGA - bool - select ARCH_HAS_RNGA - config IMX_HAVE_PLATFORM_MXC_RTC bool diff --git a/arch/arm/mach-imx/devices/platform-mxc_rnga.c b/arch/arm/mach-imx/devices/platform-mxc_rnga.c deleted file mode 100644 index 851fbc8af7a9..000000000000 --- a/arch/arm/mach-imx/devices/platform-mxc_rnga.c +++ /dev/null @@ -1,53 +0,0 @@ -/* - * Copyright (C) 2010 Pengutronix - * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> - * - * This program is free software; you can redistribute it and/or modify it under - * the terms of the GNU General Public License version 2 as published by the - * Free Software Foundation. - */ -#include "../hardware.h" -#include "devices-common.h" - -struct imx_mxc_rnga_data { - resource_size_t iobase; -}; - -#define imx_mxc_rnga_data_entry_single(soc) \ - { \ - .iobase = soc ## _RNGA_BASE_ADDR, \ - } - -#ifdef CONFIG_SOC_IMX31 -static const struct imx_mxc_rnga_data imx31_mxc_rnga_data __initconst = - imx_mxc_rnga_data_entry_single(MX31); -#endif /* ifdef CONFIG_SOC_IMX31 */ - -static struct platform_device *__init imx_add_mxc_rnga( - const struct imx_mxc_rnga_data *data) -{ - struct resource res[] = { - { - .start = data->iobase, - .end = data->iobase + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - }; - return imx_add_platform_device("mxc_rnga", -1, - res, ARRAY_SIZE(res), NULL, 0); -} - -static int __init imxXX_add_mxc_rnga(void) -{ - struct platform_device *ret; - -#if defined(CONFIG_SOC_IMX31) - if (cpu_is_mx31()) - ret = imx_add_mxc_rnga(&imx31_mxc_rnga_data); - else -#endif /* if defined(CONFIG_SOC_IMX31) */ - ret = ERR_PTR(-ENODEV); - - return PTR_ERR_OR_ZERO(ret); -} -arch_initcall(imxXX_add_mxc_rnga); diff --git a/arch/arm/mach-imx/eukrea-baseboards.h b/arch/arm/mach-imx/eukrea-baseboards.h deleted file mode 100644 index bb2c90d65914..000000000000 --- a/arch/arm/mach-imx/eukrea-baseboards.h +++ /dev/null @@ -1,42 +0,0 @@ -/* - * Copyright (C) 2010 Eric Benard - eric@eukrea.com - * - * Based on board-pcm038.h which is : - * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#ifndef __MACH_EUKREA_BASEBOARDS_H__ -#define __MACH_EUKREA_BASEBOARDS_H__ - -#ifndef __ASSEMBLY__ -/* - * This CPU module needs a baseboard to work. After basic initializing - * its own devices, it calls baseboard's init function. - * TODO: Add your own baseboard init function and call it from - * inside eukrea_cpuimx25_init() or eukrea_cpuimx35_init() - * - * This example here is for the development board. Refer - * mach-mx25/eukrea_mbimxsd-baseboard.c for cpuimx25 - * mach-mx3/eukrea_mbimxsd-baseboard.c for cpuimx35 - */ - -extern void eukrea_mbimxsd25_baseboard_init(void); -extern void eukrea_mbimxsd35_baseboard_init(void); - -#endif - -#endif /* __MACH_EUKREA_BASEBOARDS_H__ */ diff --git a/arch/arm/mach-imx/imx27-dt.c b/arch/arm/mach-imx/imx27-dt.c index 530a728c2acc..a754b8a48f38 100644 --- a/arch/arm/mach-imx/imx27-dt.c +++ b/arch/arm/mach-imx/imx27-dt.c @@ -27,5 +27,6 @@ DT_MACHINE_START(IMX27_DT, "Freescale i.MX27 (Device Tree Support)") .map_io = mx27_map_io, .init_early = imx27_init_early, .init_irq = mx27_init_irq, + .init_late = imx27_pm_init, .dt_compat = imx27_dt_board_compat, MACHINE_END diff --git a/arch/arm/mach-imx/imx31-dt.c b/arch/arm/mach-imx/imx31-dt.c index 32100222a017..62e6b4fb5370 100644 --- a/arch/arm/mach-imx/imx31-dt.c +++ b/arch/arm/mach-imx/imx31-dt.c @@ -28,10 +28,22 @@ static void __init imx31_dt_timer_init(void) mx31_clocks_init_dt(); } +/* FIXME: replace with DT binding */ +static const struct resource imx31_rnga_res[] __initconst = { + DEFINE_RES_MEM(MX31_RNGA_BASE_ADDR, SZ_16K), +}; + +static void __init imx31_dt_mach_init(void) +{ + platform_device_register_simple("mxc_rnga", -1, imx31_rnga_res, + ARRAY_SIZE(imx31_rnga_res)); +} + DT_MACHINE_START(IMX31_DT, "Freescale i.MX31 (Device Tree Support)") .map_io = mx31_map_io, .init_early = imx31_init_early, .init_irq = mx31_init_irq, .init_time = imx31_dt_timer_init, + .init_machine = imx31_dt_mach_init, .dt_compat = imx31_dt_board_compat, MACHINE_END diff --git a/arch/arm/mach-imx/imx35-dt.c b/arch/arm/mach-imx/imx35-dt.c index e9396037235d..99bb63dedb87 100644 --- a/arch/arm/mach-imx/imx35-dt.c +++ b/arch/arm/mach-imx/imx35-dt.c @@ -20,20 +20,16 @@ #include "common.h" #include "mx35.h" -static void __init imx35_irq_init(void) -{ - imx_init_l2cache(); - mx35_init_irq(); -} - static const char * const imx35_dt_board_compat[] __initconst = { "fsl,imx35", NULL }; DT_MACHINE_START(IMX35_DT, "Freescale i.MX35 (Device Tree Support)") + .l2c_aux_val = 0, + .l2c_aux_mask = ~0, .map_io = mx35_map_io, .init_early = imx35_init_early, - .init_irq = imx35_irq_init, + .init_irq = mx35_init_irq, .dt_compat = imx35_dt_board_compat, MACHINE_END diff --git a/arch/arm/mach-imx/mach-imx50.c b/arch/arm/mach-imx/mach-imx50.c index ecf58b9e974b..4cab5f61260f 100644 --- a/arch/arm/mach-imx/mach-imx50.c +++ b/arch/arm/mach-imx/mach-imx50.c @@ -22,6 +22,5 @@ static const char * const imx50_dt_board_compat[] __initconst = { }; DT_MACHINE_START(IMX50_DT, "Freescale i.MX50 (Device Tree Support)") - .init_irq = tzic_init_irq, .dt_compat = imx50_dt_board_compat, MACHINE_END diff --git a/arch/arm/mach-imx/mach-imx51.c b/arch/arm/mach-imx/mach-imx51.c index ec64de611d90..40564c9b1226 100644 --- a/arch/arm/mach-imx/mach-imx51.c +++ b/arch/arm/mach-imx/mach-imx51.c @@ -67,7 +67,6 @@ static const char * const imx51_dt_board_compat[] __initconst = { DT_MACHINE_START(IMX51_DT, "Freescale i.MX51 (Device Tree Support)") .init_early = imx51_init_early, - .init_irq = tzic_init_irq, .init_machine = imx51_dt_init, .init_late = imx51_init_late, .dt_compat = imx51_dt_board_compat, diff --git a/arch/arm/mach-imx/mach-imx53.c b/arch/arm/mach-imx/mach-imx53.c index 68aec23be016..07c2e8dca494 100644 --- a/arch/arm/mach-imx/mach-imx53.c +++ b/arch/arm/mach-imx/mach-imx53.c @@ -47,7 +47,6 @@ static const char * const imx53_dt_board_compat[] __initconst = { DT_MACHINE_START(IMX53_DT, "Freescale i.MX53 (Device Tree Support)") .init_early = imx53_init_early, - .init_irq = tzic_init_irq, .init_machine = imx53_dt_init, .init_late = imx53_init_late, .dt_compat = imx53_dt_board_compat, diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index e3940707eeb8..68c16d59b808 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -407,6 +407,8 @@ static const char * const imx6q_dt_compat[] __initconst = { }; DT_MACHINE_START(IMX6Q, "Freescale i.MX6 Quad/DualLite (Device Tree)") + .l2c_aux_val = 0, + .l2c_aux_mask = ~0, .smp = smp_ops(imx_smp_ops), .map_io = imx6q_map_io, .init_irq = imx6q_init_irq, diff --git a/arch/arm/mach-imx/mach-imx6sl.c b/arch/arm/mach-imx/mach-imx6sl.c index 37ae87d6e0e9..04084900d810 100644 --- a/arch/arm/mach-imx/mach-imx6sl.c +++ b/arch/arm/mach-imx/mach-imx6sl.c @@ -75,6 +75,8 @@ static const char * const imx6sl_dt_compat[] __initconst = { }; DT_MACHINE_START(IMX6SL, "Freescale i.MX6 SoloLite (Device Tree)") + .l2c_aux_val = 0, + .l2c_aux_mask = ~0, .init_irq = imx6sl_init_irq, .init_machine = imx6sl_init_machine, .init_late = imx6sl_init_late, diff --git a/arch/arm/mach-imx/mach-imx6sx.c b/arch/arm/mach-imx/mach-imx6sx.c index 107cfc15282b..7f52d9b1e8a4 100644 --- a/arch/arm/mach-imx/mach-imx6sx.c +++ b/arch/arm/mach-imx/mach-imx6sx.c @@ -103,6 +103,8 @@ static const char * const imx6sx_dt_compat[] __initconst = { }; DT_MACHINE_START(IMX6SX, "Freescale i.MX6 SoloX (Device Tree)") + .l2c_aux_val = 0, + .l2c_aux_mask = ~0, .init_irq = imx6sx_init_irq, .init_machine = imx6sx_init_machine, .dt_compat = imx6sx_dt_compat, diff --git a/arch/arm/mach-imx/mm-imx1.c b/arch/arm/mach-imx/mm-imx1.c index e065fedb3ad4..9a42f19be81e 100644 --- a/arch/arm/mach-imx/mm-imx1.c +++ b/arch/arm/mach-imx/mm-imx1.c @@ -50,7 +50,7 @@ void __init mx1_init_irq(void) void __init imx1_soc_init(void) { - mxc_arch_reset_init(MX1_IO_ADDRESS(MX1_WDT_BASE_ADDR)); + imx1_reset_init(MX1_IO_ADDRESS(MX1_WDT_BASE_ADDR)); mxc_device_init(); mxc_register_gpio("imx1-gpio", 0, MX1_GPIO1_BASE_ADDR, SZ_256, diff --git a/arch/arm/mach-imx/mm-imx27.c b/arch/arm/mach-imx/mm-imx27.c index 7d82a5a5b16b..862b9b7762c7 100644 --- a/arch/arm/mach-imx/mm-imx27.c +++ b/arch/arm/mach-imx/mm-imx27.c @@ -98,4 +98,6 @@ void __init imx27_soc_init(void) /* imx27 has the imx21 type audmux */ platform_device_register_simple("imx21-audmux", 0, imx27_audmux_res, ARRAY_SIZE(imx27_audmux_res)); + + imx27_pm_init(); } diff --git a/arch/arm/mach-imx/mm-imx3.c b/arch/arm/mach-imx/mm-imx3.c index 0884ca90d15a..7638a35b3b36 100644 --- a/arch/arm/mach-imx/mm-imx3.c +++ b/arch/arm/mach-imx/mm-imx3.c @@ -19,6 +19,7 @@ #include <linux/mm.h> #include <linux/init.h> #include <linux/err.h> +#include <linux/io.h> #include <linux/pinctrl/machine.h> #include <asm/pgtable.h> @@ -38,8 +39,6 @@ static void imx3_idle(void) { unsigned long reg = 0; - mx3_cpu_lp_set(MX3_WAIT); - __asm__ __volatile__( /* disable I and D cache */ "mrc p15, 0, %0, c1, c0, 0\n" @@ -135,11 +134,20 @@ void __init mx31_map_io(void) iotable_init(mx31_io_desc, ARRAY_SIZE(mx31_io_desc)); } +static void imx31_idle(void) +{ + int reg = imx_readl(mx3_ccm_base + MXC_CCM_CCMR); + reg &= ~MXC_CCM_CCMR_LPM_MASK; + imx_writel(reg, mx3_ccm_base + MXC_CCM_CCMR); + + imx3_idle(); +} + void __init imx31_init_early(void) { mxc_set_cpu_type(MXC_CPU_MX31); arch_ioremap_caller = imx3_ioremap_caller; - arm_pm_idle = imx3_idle; + arm_pm_idle = imx31_idle; mx3_ccm_base = MX31_IO_ADDRESS(MX31_CCM_BASE_ADDR); } @@ -167,6 +175,10 @@ static const struct resource imx31_audmux_res[] __initconst = { DEFINE_RES_MEM(MX31_AUDMUX_BASE_ADDR, SZ_16K), }; +static const struct resource imx31_rnga_res[] __initconst = { + DEFINE_RES_MEM(MX31_RNGA_BASE_ADDR, SZ_16K), +}; + void __init imx31_soc_init(void) { int to_version = mx31_revision() >> 4; @@ -195,6 +207,8 @@ void __init imx31_soc_init(void) platform_device_register_simple("imx31-audmux", 0, imx31_audmux_res, ARRAY_SIZE(imx31_audmux_res)); + platform_device_register_simple("mxc_rnga", -1, imx31_rnga_res, + ARRAY_SIZE(imx31_rnga_res)); } #endif /* ifdef CONFIG_SOC_IMX31 */ @@ -212,11 +226,21 @@ void __init mx35_map_io(void) iotable_init(mx35_io_desc, ARRAY_SIZE(mx35_io_desc)); } +static void imx35_idle(void) +{ + int reg = imx_readl(mx3_ccm_base + MXC_CCM_CCMR); + reg &= ~MXC_CCM_CCMR_LPM_MASK; + reg |= MXC_CCM_CCMR_LPM_WAIT_MX35; + imx_writel(reg, mx3_ccm_base + MXC_CCM_CCMR); + + imx3_idle(); +} + void __init imx35_init_early(void) { mxc_set_cpu_type(MXC_CPU_MX35); mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR)); - arm_pm_idle = imx3_idle; + arm_pm_idle = imx35_idle; arch_ioremap_caller = imx3_ioremap_caller; mx3_ccm_base = MX35_IO_ADDRESS(MX35_CCM_BASE_ADDR); } diff --git a/arch/arm/mach-imx/mxc.h b/arch/arm/mach-imx/mxc.h index d32704256781..34f2ff62583c 100644 --- a/arch/arm/mach-imx/mxc.h +++ b/arch/arm/mach-imx/mxc.h @@ -45,105 +45,7 @@ #ifndef __ASSEMBLY__ extern unsigned int __mxc_cpu_type; -#endif - -#ifdef CONFIG_SOC_IMX1 -# ifdef mxc_cpu_type -# undef mxc_cpu_type -# define mxc_cpu_type __mxc_cpu_type -# else -# define mxc_cpu_type MXC_CPU_MX1 -# endif -# define cpu_is_mx1() (mxc_cpu_type == MXC_CPU_MX1) -#else -# define cpu_is_mx1() (0) -#endif - -#ifdef CONFIG_SOC_IMX21 -# ifdef mxc_cpu_type -# undef mxc_cpu_type -# define mxc_cpu_type __mxc_cpu_type -# else -# define mxc_cpu_type MXC_CPU_MX21 -# endif -# define cpu_is_mx21() (mxc_cpu_type == MXC_CPU_MX21) -#else -# define cpu_is_mx21() (0) -#endif -#ifdef CONFIG_SOC_IMX25 -# ifdef mxc_cpu_type -# undef mxc_cpu_type -# define mxc_cpu_type __mxc_cpu_type -# else -# define mxc_cpu_type MXC_CPU_MX25 -# endif -# define cpu_is_mx25() (mxc_cpu_type == MXC_CPU_MX25) -#else -# define cpu_is_mx25() (0) -#endif - -#ifdef CONFIG_SOC_IMX27 -# ifdef mxc_cpu_type -# undef mxc_cpu_type -# define mxc_cpu_type __mxc_cpu_type -# else -# define mxc_cpu_type MXC_CPU_MX27 -# endif -# define cpu_is_mx27() (mxc_cpu_type == MXC_CPU_MX27) -#else -# define cpu_is_mx27() (0) -#endif - -#ifdef CONFIG_SOC_IMX31 -# ifdef mxc_cpu_type -# undef mxc_cpu_type -# define mxc_cpu_type __mxc_cpu_type -# else -# define mxc_cpu_type MXC_CPU_MX31 -# endif -# define cpu_is_mx31() (mxc_cpu_type == MXC_CPU_MX31) -#else -# define cpu_is_mx31() (0) -#endif - -#ifdef CONFIG_SOC_IMX35 -# ifdef mxc_cpu_type -# undef mxc_cpu_type -# define mxc_cpu_type __mxc_cpu_type -# else -# define mxc_cpu_type MXC_CPU_MX35 -# endif -# define cpu_is_mx35() (mxc_cpu_type == MXC_CPU_MX35) -#else -# define cpu_is_mx35() (0) -#endif - -#ifdef CONFIG_SOC_IMX51 -# ifdef mxc_cpu_type -# undef mxc_cpu_type -# define mxc_cpu_type __mxc_cpu_type -# else -# define mxc_cpu_type MXC_CPU_MX51 -# endif -# define cpu_is_mx51() (mxc_cpu_type == MXC_CPU_MX51) -#else -# define cpu_is_mx51() (0) -#endif - -#ifdef CONFIG_SOC_IMX53 -# ifdef mxc_cpu_type -# undef mxc_cpu_type -# define mxc_cpu_type __mxc_cpu_type -# else -# define mxc_cpu_type MXC_CPU_MX53 -# endif -# define cpu_is_mx53() (mxc_cpu_type == MXC_CPU_MX53) -#else -# define cpu_is_mx53() (0) -#endif - -#ifndef __ASSEMBLY__ #ifdef CONFIG_SOC_IMX6SL static inline bool cpu_is_imx6sl(void) { @@ -190,9 +92,6 @@ int tzic_enable_wake(void); extern struct cpu_op *(*get_cpu_op)(int *op); #endif -#define cpu_is_mx3() (cpu_is_mx31() || cpu_is_mx35()) -#define cpu_is_mx2() (cpu_is_mx21() || cpu_is_mx27()) - #define imx_readl readl_relaxed #define imx_readw readw_relaxed #define imx_writel writel_relaxed diff --git a/arch/arm/mach-imx/pm-imx27.c b/arch/arm/mach-imx/pm-imx27.c index 43096c8990d4..d943535566c8 100644 --- a/arch/arm/mach-imx/pm-imx27.c +++ b/arch/arm/mach-imx/pm-imx27.c @@ -37,13 +37,7 @@ static const struct platform_suspend_ops mx27_suspend_ops = { .valid = suspend_valid_only_mem, }; -static int __init mx27_pm_init(void) +void __init imx27_pm_init(void) { - if (!cpu_is_mx27()) - return 0; - suspend_set_ops(&mx27_suspend_ops); - return 0; } - -device_initcall(mx27_pm_init); diff --git a/arch/arm/mach-imx/pm-imx3.c b/arch/arm/mach-imx/pm-imx3.c deleted file mode 100644 index 94c0898751d8..000000000000 --- a/arch/arm/mach-imx/pm-imx3.c +++ /dev/null @@ -1,38 +0,0 @@ -/* - * Copyright (C) 2012 Freescale Semiconductor, Inc. All Rights Reserved. - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ -#include <linux/io.h> - -#include "common.h" -#include "crmregs-imx3.h" -#include "devices/devices-common.h" -#include "hardware.h" - -/* - * Set cpu low power mode before WFI instruction. This function is called - * mx3 because it can be used for mx31 and mx35. - * Currently only WAIT_MODE is supported. - */ -void mx3_cpu_lp_set(enum mx3_cpu_pwr_mode mode) -{ - int reg = imx_readl(mx3_ccm_base + MXC_CCM_CCMR); - reg &= ~MXC_CCM_CCMR_LPM_MASK; - - switch (mode) { - case MX3_WAIT: - if (cpu_is_mx35()) - reg |= MXC_CCM_CCMR_LPM_WAIT_MX35; - imx_writel(reg, mx3_ccm_base + MXC_CCM_CCMR); - break; - default: - pr_err("Unknown cpu power mode: %d\n", mode); - return; - } -} diff --git a/arch/arm/mach-imx/system.c b/arch/arm/mach-imx/system.c index 105d1ce4ed9d..c06af650e6b1 100644 --- a/arch/arm/mach-imx/system.c +++ b/arch/arm/mach-imx/system.c @@ -34,25 +34,19 @@ static void __iomem *wdog_base; static struct clk *wdog_clk; +static int wcr_enable = (1 << 2); /* * Reset the system. It is called by machine_restart(). */ void mxc_restart(enum reboot_mode mode, const char *cmd) { - unsigned int wcr_enable; - if (!wdog_base) goto reset_fallback; if (!IS_ERR(wdog_clk)) clk_enable(wdog_clk); - if (cpu_is_mx1()) - wcr_enable = (1 << 0); - else - wcr_enable = (1 << 2); - /* Assert SRS signal */ imx_writew(wcr_enable, wdog_base); /* @@ -89,6 +83,14 @@ void __init mxc_arch_reset_init(void __iomem *base) clk_prepare(wdog_clk); } +#ifdef CONFIG_SOC_IMX1 +void __init imx1_reset_init(void __iomem *base) +{ + wcr_enable = (1 << 0); + mxc_arch_reset_init(base); +} +#endif + #ifdef CONFIG_CACHE_L2X0 void __init imx_init_l2cache(void) { @@ -98,38 +100,28 @@ void __init imx_init_l2cache(void) np = of_find_compatible_node(NULL, NULL, "arm,pl310-cache"); if (!np) - goto out; + return; l2x0_base = of_iomap(np, 0); - if (!l2x0_base) { - of_node_put(np); - goto out; - } + if (!l2x0_base) + goto put_node; - if (readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN) - goto skip_if_enabled; + if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)) { + /* Configure the L2 PREFETCH and POWER registers */ + val = readl_relaxed(l2x0_base + L310_PREFETCH_CTRL); + val |= L310_PREFETCH_CTRL_DBL_LINEFILL | + L310_PREFETCH_CTRL_INSTR_PREFETCH | + L310_PREFETCH_CTRL_DATA_PREFETCH; - /* Configure the L2 PREFETCH and POWER registers */ - val = readl_relaxed(l2x0_base + L310_PREFETCH_CTRL); - val |= 0x70800000; - /* - * The L2 cache controller(PL310) version on the i.MX6D/Q is r3p1-50rel0 - * The L2 cache controller(PL310) version on the i.MX6DL/SOLO/SL is r3p2 - * But according to ARM PL310 errata: 752271 - * ID: 752271: Double linefill feature can cause data corruption - * Fault Status: Present in: r3p0, r3p1, r3p1-50rel0. Fixed in r3p2 - * Workaround: The only workaround to this erratum is to disable the - * double linefill feature. This is the default behavior. - */ - if (cpu_is_imx6q()) - val &= ~(1 << 30 | 1 << 23); - writel_relaxed(val, l2x0_base + L310_PREFETCH_CTRL); + /* Set perfetch offset to improve performance */ + val &= ~L310_PREFETCH_CTRL_OFFSET_MASK; + val |= 15; + + writel_relaxed(val, l2x0_base + L310_PREFETCH_CTRL); + } -skip_if_enabled: iounmap(l2x0_base); +put_node: of_node_put(np); - -out: - l2x0_of_init(0, ~0); } #endif diff --git a/arch/arm/mach-imx/tzic.c b/arch/arm/mach-imx/tzic.c index ae23d50f7861..a53fdc263a37 100644 --- a/arch/arm/mach-imx/tzic.c +++ b/arch/arm/mach-imx/tzic.c @@ -9,12 +9,11 @@ * http://www.gnu.org/copyleft/gpl.html */ -#include <linux/module.h> -#include <linux/moduleparam.h> #include <linux/init.h> #include <linux/device.h> #include <linux/errno.h> #include <linux/io.h> +#include <linux/irqchip.h> #include <linux/irqdomain.h> #include <linux/of.h> #include <linux/of_address.h> @@ -153,13 +152,11 @@ static void __exception_irq_entry tzic_handle_irq(struct pt_regs *regs) * interrupts. It registers the interrupt enable and disable functions * to the kernel for each interrupt source. */ -void __init tzic_init_irq(void) +static int __init tzic_init_dt(struct device_node *np, struct device_node *p) { - struct device_node *np; int irq_base; int i; - np = of_find_compatible_node(NULL, NULL, "fsl,tzic"); tzic_base = of_iomap(np, 0); WARN_ON(!tzic_base); @@ -199,7 +196,10 @@ void __init tzic_init_irq(void) #endif pr_info("TrustZone Interrupt Controller (TZIC) initialized\n"); + + return 0; } +IRQCHIP_DECLARE(tzic, "fsl,tzic", tzic_init_dt); /** * tzic_enable_wake() - enable wakeup interrupt diff --git a/arch/arm/mach-integrator/Kconfig b/arch/arm/mach-integrator/Kconfig index 291262e5aeaf..599f973e10d8 100644 --- a/arch/arm/mach-integrator/Kconfig +++ b/arch/arm/mach-integrator/Kconfig @@ -32,9 +32,9 @@ config ARCH_INTEGRATOR_AP config INTEGRATOR_IMPD1 bool "Include support for Integrator/IM-PD1" depends on ARCH_INTEGRATOR_AP - select ARCH_REQUIRE_GPIOLIB select ARM_VIC - select GPIO_PL061 if GPIOLIB + select GPIO_PL061 + select GPIOLIB help The IM-PD1 is an add-on logic module for the Integrator which allows ARM(R) Ltd PrimeCells to be developed and evaluated. diff --git a/arch/arm/mach-meson/Kconfig b/arch/arm/mach-meson/Kconfig index 31bdd91098b6..fbce42d7390f 100644 --- a/arch/arm/mach-meson/Kconfig +++ b/arch/arm/mach-meson/Kconfig @@ -1,7 +1,7 @@ menuconfig ARCH_MESON bool "Amlogic Meson SoCs" depends on ARCH_MULTI_V7 - select ARCH_REQUIRE_GPIOLIB + select GPIOLIB select GENERIC_IRQ_CHIP select ARM_GIC select CACHE_L2X0 diff --git a/arch/arm/mach-mmp/Kconfig b/arch/arm/mach-mmp/Kconfig index 01c57d369462..94500bed56ab 100644 --- a/arch/arm/mach-mmp/Kconfig +++ b/arch/arm/mach-mmp/Kconfig @@ -1,8 +1,8 @@ menuconfig ARCH_MMP bool "Marvell PXA168/910/MMP2" depends on ARCH_MULTI_V5 || ARCH_MULTI_V7 - select ARCH_REQUIRE_GPIOLIB select GPIO_PXA + select GPIOLIB select PINCTRL select PLAT_PXA help diff --git a/arch/arm/mach-moxart/Kconfig b/arch/arm/mach-moxart/Kconfig index ddc79cea32d3..f69e28b85e88 100644 --- a/arch/arm/mach-moxart/Kconfig +++ b/arch/arm/mach-moxart/Kconfig @@ -5,7 +5,7 @@ menuconfig ARCH_MOXART select ARM_DMA_MEM_BUFFERABLE select MOXART_TIMER select GENERIC_IRQ_CHIP - select ARCH_REQUIRE_GPIOLIB + select GPIOLIB select PHYLIB if NETDEVICES help Say Y here if you want to run your kernel on hardware with a diff --git a/arch/arm/mach-mv78xx0/Kconfig b/arch/arm/mach-mv78xx0/Kconfig index c32f85559c65..81c0f08a2684 100644 --- a/arch/arm/mach-mv78xx0/Kconfig +++ b/arch/arm/mach-mv78xx0/Kconfig @@ -1,8 +1,8 @@ menuconfig ARCH_MV78XX0 bool "Marvell MV78xx0" depends on ARCH_MULTI_V5 - select ARCH_REQUIRE_GPIOLIB select CPU_FEROCEON + select GPIOLIB select MVEBU_MBUS select PCI select PLAT_ORION_LEGACY diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig index 348044ea650c..f9b6bd306cfe 100644 --- a/arch/arm/mach-mvebu/Kconfig +++ b/arch/arm/mach-mvebu/Kconfig @@ -8,7 +8,7 @@ menuconfig ARCH_MVEBU select SOC_BUS select MVEBU_MBUS select ZONE_DMA if ARM_LPAE - select ARCH_REQUIRE_GPIOLIB + select GPIOLIB select PCI_QUIRKS if PCI select OF_ADDRESS_PCI @@ -119,8 +119,8 @@ config MACH_DOVE config MACH_KIRKWOOD bool "Marvell Kirkwood boards" depends on ARCH_MULTI_V5 - select ARCH_REQUIRE_GPIOLIB select CPU_FEROCEON + select GPIOLIB select KIRKWOOD_CLK select MACH_MVEBU_ANY select ORION_IRQCHIP diff --git a/arch/arm/mach-mvebu/coherency.h b/arch/arm/mach-mvebu/coherency.h index 54cb7607b526..6067f14263f7 100644 --- a/arch/arm/mach-mvebu/coherency.h +++ b/arch/arm/mach-mvebu/coherency.h @@ -14,6 +14,7 @@ #ifndef __MACH_370_XP_COHERENCY_H #define __MACH_370_XP_COHERENCY_H +extern void __iomem *coherency_base; /* for coherency_ll.S */ extern unsigned long coherency_phys_base; int set_cpu_coherent(void); diff --git a/arch/arm/mach-mvebu/cpu-reset.c b/arch/arm/mach-mvebu/cpu-reset.c index 4a2cadd6b48e..f33a31c6aff8 100644 --- a/arch/arm/mach-mvebu/cpu-reset.c +++ b/arch/arm/mach-mvebu/cpu-reset.c @@ -16,6 +16,8 @@ #include <linux/io.h> #include <linux/resource.h> +#include "common.h" + static void __iomem *cpu_reset_base; static size_t cpu_reset_size; diff --git a/arch/arm/mach-mvebu/kirkwood-pm.c b/arch/arm/mach-mvebu/kirkwood-pm.c index cbb816f2120c..1e1f879f16ce 100644 --- a/arch/arm/mach-mvebu/kirkwood-pm.c +++ b/arch/arm/mach-mvebu/kirkwood-pm.c @@ -18,6 +18,7 @@ #include <linux/suspend.h> #include <linux/io.h> #include "kirkwood.h" +#include "kirkwood-pm.h" static void __iomem *ddr_operation_base; static void __iomem *memory_pm_ctrl; @@ -66,11 +67,10 @@ static const struct platform_suspend_ops kirkwood_suspend_ops = { .valid = kirkwood_pm_valid_standby, }; -int __init kirkwood_pm_init(void) +void __init kirkwood_pm_init(void) { ddr_operation_base = ioremap(DDR_OPERATION_BASE, 4); memory_pm_ctrl = ioremap(MEMORY_PM_CTRL_PHYS, 4); suspend_set_ops(&kirkwood_suspend_ops); - return 0; } diff --git a/arch/arm/mach-mvebu/kirkwood.c b/arch/arm/mach-mvebu/kirkwood.c index 8f459ee34e6f..7d9f2fd9e450 100644 --- a/arch/arm/mach-mvebu/kirkwood.c +++ b/arch/arm/mach-mvebu/kirkwood.c @@ -150,7 +150,7 @@ eth_fixup_skip: * causes mbus errors (which can occur for example for PCI aborts) to * throw CPU aborts, which we're not set up to deal with. */ -void kirkwood_disable_mbus_error_propagation(void) +static void kirkwood_disable_mbus_error_propagation(void) { void __iomem *cpu_config; diff --git a/arch/arm/mach-mvebu/pm.c b/arch/arm/mach-mvebu/pm.c index 8d32bf762b86..2990c5269b18 100644 --- a/arch/arm/mach-mvebu/pm.c +++ b/arch/arm/mach-mvebu/pm.c @@ -23,6 +23,7 @@ #include <asm/suspend.h> #include "coherency.h" +#include "common.h" #include "pmsu.h" #define SDRAM_CONFIG_OFFS 0x0 diff --git a/arch/arm/mach-mvebu/pmsu.c b/arch/arm/mach-mvebu/pmsu.c index b44442338e4e..f39bd51bce18 100644 --- a/arch/arm/mach-mvebu/pmsu.c +++ b/arch/arm/mach-mvebu/pmsu.c @@ -25,6 +25,7 @@ #include <linux/io.h> #include <linux/kernel.h> #include <linux/mbus.h> +#include <linux/mvebu-pmsu.h> #include <linux/of_address.h> #include <linux/of_device.h> #include <linux/platform_device.h> @@ -38,7 +39,7 @@ #include <asm/suspend.h> #include <asm/tlbflush.h> #include "common.h" - +#include "pmsu.h" #define PMSU_BASE_OFFSET 0x100 #define PMSU_REG_SIZE 0x1000 diff --git a/arch/arm/mach-mvebu/system-controller.c b/arch/arm/mach-mvebu/system-controller.c index c6c132acd7a6..76cbc82a7407 100644 --- a/arch/arm/mach-mvebu/system-controller.c +++ b/arch/arm/mach-mvebu/system-controller.c @@ -127,7 +127,7 @@ int mvebu_system_controller_get_soc_id(u32 *dev, u32 *rev) } #if defined(CONFIG_SMP) && defined(CONFIG_MACH_MVEBU_V7) -void mvebu_armada375_smp_wa_init(void) +static void mvebu_armada375_smp_wa_init(void) { u32 dev, rev; phys_addr_t resume_addr_reg; diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig index 68a3a9ec605d..cb429bc6dc0d 100644 --- a/arch/arm/mach-mxs/Kconfig +++ b/arch/arm/mach-mxs/Kconfig @@ -15,7 +15,7 @@ config SOC_IMX28 config ARCH_MXS bool "Freescale MXS (i.MX23, i.MX28) support" depends on ARCH_MULTI_V5 - select ARCH_REQUIRE_GPIOLIB + select GPIOLIB select MXS_TIMER select PINCTRL select SOC_BUS diff --git a/arch/arm/mach-nomadik/Kconfig b/arch/arm/mach-nomadik/Kconfig index 3c61096c8627..b7e9801fdaa4 100644 --- a/arch/arm/mach-nomadik/Kconfig +++ b/arch/arm/mach-nomadik/Kconfig @@ -1,12 +1,12 @@ menuconfig ARCH_NOMADIK bool "ST-Ericsson Nomadik" depends on ARCH_MULTI_V5 - select ARCH_REQUIRE_GPIOLIB select ARM_AMBA select ARM_VIC select CLKSRC_NOMADIK_MTU select CLKSRC_NOMADIK_MTU_SCHED_CLOCK select CPU_ARM926T + select GPIOLIB select MIGHT_HAVE_CACHE_L2X0 select PINCTRL select PINCTRL_NOMADIK diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 1a648e9dfaa0..5a0b380a8166 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -92,9 +92,9 @@ config ARCH_OMAP2PLUS select ARCH_HAS_BANDGAP select ARCH_HAS_HOLES_MEMORYMODEL select ARCH_OMAP - select ARCH_REQUIRE_GPIOLIB select CLKSRC_MMIO select GENERIC_IRQ_CHIP + select GPIOLIB select MACH_OMAP_GENERIC select MEMORY select MFD_SYSCON diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig index a2af15822fcb..89bb0fc796bd 100644 --- a/arch/arm/mach-orion5x/Kconfig +++ b/arch/arm/mach-orion5x/Kconfig @@ -1,9 +1,9 @@ menuconfig ARCH_ORION5X bool "Marvell Orion" depends on MMU && ARCH_MULTI_V5 - select ARCH_REQUIRE_GPIOLIB select CPU_FEROCEON select GENERIC_CLOCKEVENTS + select GPIOLIB select MVEBU_MBUS select PCI select PLAT_ORION_LEGACY diff --git a/arch/arm/mach-orion5x/irq.c b/arch/arm/mach-orion5x/irq.c index de980ef9cda1..ac4af2283bef 100644 --- a/arch/arm/mach-orion5x/irq.c +++ b/arch/arm/mach-orion5x/irq.c @@ -26,7 +26,7 @@ static int __initdata gpio0_irqs[4] = { IRQ_ORION5X_GPIO_24_31, }; -asmlinkage void +static asmlinkage void __exception_irq_entry orion5x_legacy_handle_irq(struct pt_regs *regs) { u32 stat; diff --git a/arch/arm/mach-oxnas/Kconfig b/arch/arm/mach-oxnas/Kconfig index 4fff3c7666df..2dde0acf01fd 100644 --- a/arch/arm/mach-oxnas/Kconfig +++ b/arch/arm/mach-oxnas/Kconfig @@ -1,7 +1,7 @@ menuconfig ARCH_OXNAS bool "Oxford Semiconductor OXNAS Family SoCs" - select ARCH_REQUIRE_GPIOLIB select ARCH_HAS_RESET_CONTROLLER + select GPIOLIB select PINCTRL depends on ARCH_MULTI_V5 help diff --git a/arch/arm/mach-picoxcell/Kconfig b/arch/arm/mach-picoxcell/Kconfig index aef92ba0eacd..1c8f701526c9 100644 --- a/arch/arm/mach-picoxcell/Kconfig +++ b/arch/arm/mach-picoxcell/Kconfig @@ -1,8 +1,8 @@ config ARCH_PICOXCELL bool "Picochip PicoXcell" depends on ARCH_MULTI_V6 - select ARCH_REQUIRE_GPIOLIB select ARM_VIC select DW_APB_TIMER_OF + select GPIOLIB select HAVE_TCM select NO_IOPORT_MAP diff --git a/arch/arm/mach-prima2/Kconfig b/arch/arm/mach-prima2/Kconfig index 9e938f2961cf..85e874a97337 100644 --- a/arch/arm/mach-prima2/Kconfig +++ b/arch/arm/mach-prima2/Kconfig @@ -3,8 +3,8 @@ menuconfig ARCH_SIRF depends on ARCH_MULTI_V7 select ARCH_HAS_RESET_CONTROLLER select RESET_CONTROLLER - select ARCH_REQUIRE_GPIOLIB select GENERIC_IRQ_CHIP + select GPIOLIB select NO_IOPORT_MAP select REGMAP select PINCTRL diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig index cef42fd886d1..9ad84cd01ba0 100644 --- a/arch/arm/mach-rockchip/Kconfig +++ b/arch/arm/mach-rockchip/Kconfig @@ -4,10 +4,10 @@ config ARCH_ROCKCHIP select PINCTRL select PINCTRL_ROCKCHIP select ARCH_HAS_RESET_CONTROLLER - select ARCH_REQUIRE_GPIOLIB select ARM_AMBA select ARM_GIC select CACHE_L2X0 + select GPIOLIB select HAVE_ARM_ARCH_TIMER select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig index b91aee406c74..4b1690acb6a5 100644 --- a/arch/arm/mach-s3c24xx/Kconfig +++ b/arch/arm/mach-s3c24xx/Kconfig @@ -11,7 +11,7 @@ if ARCH_S3C24XX config PLAT_S3C24XX def_bool y - select ARCH_REQUIRE_GPIOLIB + select GPIOLIB select NO_IOPORT_MAP select S3C_DEV_NAND select IRQ_DOMAIN diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h b/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h index c6583cfa5835..0d622f3b57a5 100644 --- a/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h +++ b/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h @@ -520,7 +520,7 @@ #define S3C24XX_EXTINT1 S3C24XX_GPIOREG2(0x8C) #define S3C24XX_EXTINT2 S3C24XX_GPIOREG2(0x90) -/* interrupt filtering conrrol for EINT16..EINT23 */ +/* interrupt filtering control for EINT16..EINT23 */ #define S3C2410_EINFLT0 S3C2410_GPIOREG(0x94) #define S3C2410_EINFLT1 S3C2410_GPIOREG(0x98) #define S3C2410_EINFLT2 S3C2410_GPIOREG(0x9C) diff --git a/arch/arm/mach-s3c24xx/iotiming-s3c2410.c b/arch/arm/mach-s3c24xx/iotiming-s3c2410.c index 4cd13ab6496b..65e5f9cb650f 100644 --- a/arch/arm/mach-s3c24xx/iotiming-s3c2410.c +++ b/arch/arm/mach-s3c24xx/iotiming-s3c2410.c @@ -423,7 +423,7 @@ void s3c2410_iotiming_set(struct s3c_cpufreq_config *cfg, * @timings: The IO timing information to fill out. * * Calculate the @timings timing information from the current frequency - * information in @cfg, and the new frequency configur + * information in @cfg, and the new frequency configuration * through all the IO banks, reading the state and then updating @iot * as necessary. * diff --git a/arch/arm/mach-s3c24xx/mach-n30.c b/arch/arm/mach-s3c24xx/mach-n30.c index 171c1f11fd22..070a0d0714a5 100644 --- a/arch/arm/mach-s3c24xx/mach-n30.c +++ b/arch/arm/mach-s3c24xx/mach-n30.c @@ -522,7 +522,7 @@ static void __init n30_hwinit(void) * * The pull ups for H6/H7 are enabled on N30 but not on the * N35/PiN. I suppose is useful for a budget model of the N30 - * with no bluetooh. It doesn't hurt to have the pull ups + * with no bluetooth. It doesn't hurt to have the pull ups * enabled on the N35, so leave them enabled for all models. */ __raw_writel(0x0028aaaa, S3C2410_GPHCON); diff --git a/arch/arm/mach-s3c24xx/mach-osiris-dvs.c b/arch/arm/mach-s3c24xx/mach-osiris-dvs.c index ce2db235dbaf..262ab0744748 100644 --- a/arch/arm/mach-s3c24xx/mach-osiris-dvs.c +++ b/arch/arm/mach-s3c24xx/mach-osiris-dvs.c @@ -143,7 +143,7 @@ static int osiris_dvs_remove(struct platform_device *pdev) return 0; } -/* the CONFIG_PM block is so small, it isn't worth actaully compiling it +/* the CONFIG_PM block is so small, it isn't worth actually compiling it * out if the configuration isn't set. */ static int osiris_dvs_suspend(struct device *dev) diff --git a/arch/arm/mach-s3c24xx/pll-s3c2410.c b/arch/arm/mach-s3c24xx/pll-s3c2410.c index 5e37d368594b..7ee4924a543d 100644 --- a/arch/arm/mach-s3c24xx/pll-s3c2410.c +++ b/arch/arm/mach-s3c24xx/pll-s3c2410.c @@ -32,11 +32,12 @@ #include <plat/cpu.h> #include <plat/cpu-freq-core.h> +/* This array should be sorted in ascending order of the frequencies */ static struct cpufreq_frequency_table pll_vals_12MHz[] = { { .frequency = 34000000, .driver_data = PLLVAL(82, 2, 3), }, { .frequency = 45000000, .driver_data = PLLVAL(82, 1, 3), }, - { .frequency = 51000000, .driver_data = PLLVAL(161, 3, 3), }, { .frequency = 48000000, .driver_data = PLLVAL(120, 2, 3), }, + { .frequency = 51000000, .driver_data = PLLVAL(161, 3, 3), }, { .frequency = 56000000, .driver_data = PLLVAL(142, 2, 3), }, { .frequency = 68000000, .driver_data = PLLVAL(82, 2, 2), }, { .frequency = 79000000, .driver_data = PLLVAL(71, 1, 2), }, diff --git a/arch/arm/mach-s3c24xx/pll-s3c2440-12000000.c b/arch/arm/mach-s3c24xx/pll-s3c2440-12000000.c index b355fca6cc2e..a3fbfed75e28 100644 --- a/arch/arm/mach-s3c24xx/pll-s3c2440-12000000.c +++ b/arch/arm/mach-s3c24xx/pll-s3c2440-12000000.c @@ -20,6 +20,7 @@ #include <plat/cpu.h> #include <plat/cpu-freq-core.h> +/* This array should be sorted in ascending order of the frequencies */ static struct cpufreq_frequency_table s3c2440_plls_12[] = { { .frequency = 75000000, .driver_data = PLLVAL(0x75, 3, 3), }, /* FVco 600.000000 */ { .frequency = 80000000, .driver_data = PLLVAL(0x98, 4, 3), }, /* FVco 640.000000 */ diff --git a/arch/arm/mach-s3c24xx/pll-s3c2440-16934400.c b/arch/arm/mach-s3c24xx/pll-s3c2440-16934400.c index be9a248b5ce9..bcff89fd9871 100644 --- a/arch/arm/mach-s3c24xx/pll-s3c2440-16934400.c +++ b/arch/arm/mach-s3c24xx/pll-s3c2440-16934400.c @@ -20,6 +20,7 @@ #include <plat/cpu.h> #include <plat/cpu-freq-core.h> +/* This array should be sorted in ascending order of the frequencies */ static struct cpufreq_frequency_table s3c2440_plls_169344[] = { { .frequency = 78019200, .driver_data = PLLVAL(121, 5, 3), }, /* FVco 624.153600 */ { .frequency = 84067200, .driver_data = PLLVAL(131, 5, 3), }, /* FVco 672.537600 */ diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig index e5c1888fc67b..459214fa20b4 100644 --- a/arch/arm/mach-s3c64xx/Kconfig +++ b/arch/arm/mach-s3c64xx/Kconfig @@ -5,12 +5,12 @@ menuconfig ARCH_S3C64XX bool "Samsung S3C64XX" depends on ARCH_MULTI_V6 - select ARCH_REQUIRE_GPIOLIB select ARM_AMBA select ARM_VIC select CLKSRC_SAMSUNG_PWM select COMMON_CLK_SAMSUNG select GPIO_SAMSUNG if ATAGS + select GPIOLIB select HAVE_S3C2410_I2C if I2C select HAVE_S3C2410_WATCHDOG if WATCHDOG select HAVE_TCM diff --git a/arch/arm/mach-s3c64xx/common.h b/arch/arm/mach-s3c64xx/common.h index 9eb864412911..4f204668f00e 100644 --- a/arch/arm/mach-s3c64xx/common.h +++ b/arch/arm/mach-s3c64xx/common.h @@ -24,6 +24,7 @@ void s3c64xx_init_io(struct map_desc *mach_desc, int size); void s3c64xx_restart(enum reboot_mode mode, const char *cmd); +struct device_node; void s3c64xx_clk_init(struct device_node *np, unsigned long xtal_f, unsigned long xusbxti_f, bool is_s3c6400, void __iomem *reg_base); void s3c64xx_set_xtal_freq(unsigned long freq); diff --git a/arch/arm/mach-s3c64xx/include/mach/map.h b/arch/arm/mach-s3c64xx/include/mach/map.h index f55ccb1ce893..d51873e8f63f 100644 --- a/arch/arm/mach-s3c64xx/include/mach/map.h +++ b/arch/arm/mach-s3c64xx/include/mach/map.h @@ -99,7 +99,7 @@ #define S3C64XX_PA_USB_HSPHY (0x7C100000) -/* compatibiltiy defines. */ +/* compatibility defines. */ #define S3C_PA_TIMER S3C64XX_PA_TIMER #define S3C_PA_HSMMC0 S3C64XX_PA_HSMMC0 #define S3C_PA_HSMMC1 S3C64XX_PA_HSMMC1 diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig index 13bc9820ff22..4cec11cf5e6f 100644 --- a/arch/arm/mach-s5pv210/Kconfig +++ b/arch/arm/mach-s5pv210/Kconfig @@ -11,10 +11,10 @@ config ARCH_S5PV210 bool "Samsung S5PV210/S5PC110" depends on ARCH_MULTI_V7 select ARCH_HAS_HOLES_MEMORYMODEL - select ARCH_REQUIRE_GPIOLIB select ARM_VIC select CLKSRC_SAMSUNG_PWM select COMMON_CLK_SAMSUNG + select GPIOLIB select HAVE_S3C2410_I2C if I2C select HAVE_S3C2410_WATCHDOG if WATCHDOG select HAVE_S3C_RTC if RTC_CLASS diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index fe4ccb52f921..108ae2b41819 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -41,7 +41,7 @@ menuconfig ARCH_RENESAS select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE select NO_IOPORT_MAP select PINCTRL - select ARCH_REQUIRE_GPIOLIB + select GPIOLIB select ZONE_DMA if ARM_LPAE if ARCH_RENESAS diff --git a/arch/arm/mach-spear/Kconfig b/arch/arm/mach-spear/Kconfig index ea9ea95630bd..b7260c2b510c 100644 --- a/arch/arm/mach-spear/Kconfig +++ b/arch/arm/mach-spear/Kconfig @@ -5,9 +5,9 @@ menuconfig PLAT_SPEAR bool "ST SPEAr Family" depends on ARCH_MULTI_V7 || ARCH_MULTI_V5 - select ARCH_REQUIRE_GPIOLIB select ARM_AMBA select CLKSRC_MMIO + select GPIOLIB if PLAT_SPEAR diff --git a/arch/arm/mach-sti/Kconfig b/arch/arm/mach-sti/Kconfig index 6f1af29f935d..119e1108b1f8 100644 --- a/arch/arm/mach-sti/Kconfig +++ b/arch/arm/mach-sti/Kconfig @@ -10,7 +10,7 @@ menuconfig ARCH_STI select MFD_SYSCON select ARCH_HAS_RESET_CONTROLLER select HAVE_ARM_SCU if SMP - select ARCH_REQUIRE_GPIOLIB + select GPIOLIB select ARM_ERRATA_754322 select ARM_ERRATA_764369 if SMP select ARM_ERRATA_775420 diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig index c124d658b350..096ed216c6d5 100644 --- a/arch/arm/mach-sunxi/Kconfig +++ b/arch/arm/mach-sunxi/Kconfig @@ -1,10 +1,10 @@ menuconfig ARCH_SUNXI bool "Allwinner SoCs" depends on ARCH_MULTI_V7 - select ARCH_REQUIRE_GPIOLIB select ARCH_HAS_RESET_CONTROLLER select CLKSRC_MMIO select GENERIC_IRQ_CHIP + select GPIOLIB select PINCTRL select SUN4I_TIMER select RESET_CONTROLLER diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig index 0fa8b84ed657..329f01c5b6f8 100644 --- a/arch/arm/mach-tegra/Kconfig +++ b/arch/arm/mach-tegra/Kconfig @@ -1,11 +1,11 @@ menuconfig ARCH_TEGRA bool "NVIDIA Tegra" depends on ARCH_MULTI_V7 - select ARCH_REQUIRE_GPIOLIB select ARCH_SUPPORTS_TRUSTED_FOUNDATIONS select ARM_AMBA select ARM_GIC select CLKSRC_MMIO + select GPIOLIB select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP select PINCTRL diff --git a/arch/arm/mach-tegra/common.h b/arch/arm/mach-tegra/common.h index 1f6fb808e236..4cc00e993b00 100644 --- a/arch/arm/mach-tegra/common.h +++ b/arch/arm/mach-tegra/common.h @@ -1,4 +1,26 @@ +/* + * Copyright (c) 2011, ARM Ltd. + * Copyright (c) 2013, NVIDIA Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef __MACH_TEGRA_COMMON_H +#define __MACH_TEGRA_COMMON_H + extern const struct smp_operations tegra_smp_ops; extern int tegra_cpu_kill(unsigned int cpu); extern void tegra_cpu_die(unsigned int cpu); + +#endif diff --git a/arch/arm/mach-tegra/cpuidle-tegra114.c b/arch/arm/mach-tegra/cpuidle-tegra114.c index 9157546fe68c..d3aa9be16621 100644 --- a/arch/arm/mach-tegra/cpuidle-tegra114.c +++ b/arch/arm/mach-tegra/cpuidle-tegra114.c @@ -26,6 +26,7 @@ #include <asm/suspend.h> #include <asm/psci.h> +#include "cpuidle.h" #include "pm.h" #include "sleep.h" diff --git a/arch/arm/mach-tegra/cpuidle-tegra20.c b/arch/arm/mach-tegra/cpuidle-tegra20.c index 7469347b1749..afcee04f2616 100644 --- a/arch/arm/mach-tegra/cpuidle-tegra20.c +++ b/arch/arm/mach-tegra/cpuidle-tegra20.c @@ -30,6 +30,7 @@ #include <asm/smp_plat.h> #include <asm/suspend.h> +#include "cpuidle.h" #include "flowctrl.h" #include "iomap.h" #include "irq.h" diff --git a/arch/arm/mach-tegra/cpuidle-tegra30.c b/arch/arm/mach-tegra/cpuidle-tegra30.c index 4dbe1dae937c..c1417361e10e 100644 --- a/arch/arm/mach-tegra/cpuidle-tegra30.c +++ b/arch/arm/mach-tegra/cpuidle-tegra30.c @@ -30,6 +30,7 @@ #include <asm/smp_plat.h> #include <asm/suspend.h> +#include "cpuidle.h" #include "pm.h" #include "sleep.h" diff --git a/arch/arm/mach-tegra/cpuidle.h b/arch/arm/mach-tegra/cpuidle.h index c017dab60ffa..dd1624d4b294 100644 --- a/arch/arm/mach-tegra/cpuidle.h +++ b/arch/arm/mach-tegra/cpuidle.h @@ -23,8 +23,10 @@ void tegra20_cpuidle_pcie_irqs_in_use(void); int tegra30_cpuidle_init(void); int tegra114_cpuidle_init(void); void tegra_cpuidle_init(void); +void tegra_cpuidle_pcie_irqs_in_use(void); #else static inline void tegra_cpuidle_init(void) {} +static inline void tegra_cpuidle_pcie_irqs_in_use(void) {} #endif #endif diff --git a/arch/arm/mach-tegra/hotplug.c b/arch/arm/mach-tegra/hotplug.c index 1b129899a277..8ec707826072 100644 --- a/arch/arm/mach-tegra/hotplug.c +++ b/arch/arm/mach-tegra/hotplug.c @@ -17,6 +17,7 @@ #include <asm/smp_plat.h> +#include "common.h" #include "sleep.h" static void (*tegra_hotplug_shutdown)(void); diff --git a/arch/arm/mach-tegra/irq.c b/arch/arm/mach-tegra/irq.c index 3b9098d27ea5..a69b22d37eed 100644 --- a/arch/arm/mach-tegra/irq.c +++ b/arch/arm/mach-tegra/irq.c @@ -29,6 +29,7 @@ #include "board.h" #include "iomap.h" +#include "irq.h" #define SGI_MASK 0xFFFF diff --git a/arch/arm/mach-tegra/pm.h b/arch/arm/mach-tegra/pm.h index 83bc87583446..717b48f22912 100644 --- a/arch/arm/mach-tegra/pm.h +++ b/arch/arm/mach-tegra/pm.h @@ -36,7 +36,7 @@ void tegra30_sleep_core_init(void); void tegra_clear_cpu_in_lp2(void); bool tegra_set_cpu_in_lp2(void); - +int tegra_cpu_do_idle(void); void tegra_idle_lp2_last(void); extern void (*tegra_tear_down_cpu)(void); diff --git a/arch/arm/mach-tegra/tegra.c b/arch/arm/mach-tegra/tegra.c index 6745a657d261..e01cbca196b5 100644 --- a/arch/arm/mach-tegra/tegra.c +++ b/arch/arm/mach-tegra/tegra.c @@ -118,32 +118,14 @@ out: of_platform_default_populate(NULL, NULL, parent); } -static void __init paz00_init(void) -{ - if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC)) - tegra_paz00_wifikill_init(); -} - -static struct { - char *machine; - void (*init)(void); -} board_init_funcs[] = { - { "compal,paz00", paz00_init }, -}; - static void __init tegra_dt_init_late(void) { - int i; - tegra_init_suspend(); tegra_cpuidle_init(); - for (i = 0; i < ARRAY_SIZE(board_init_funcs); i++) { - if (of_machine_is_compatible(board_init_funcs[i].machine)) { - board_init_funcs[i].init(); - break; - } - } + if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC) && + of_machine_is_compatible("compal,paz00")) + tegra_paz00_wifikill_init(); } static const char * const tegra_dt_board_compat[] = { diff --git a/arch/arm/mach-u300/Kconfig b/arch/arm/mach-u300/Kconfig index 4fdc3425ffbd..22dcbf5b76b2 100644 --- a/arch/arm/mach-u300/Kconfig +++ b/arch/arm/mach-u300/Kconfig @@ -1,11 +1,11 @@ menuconfig ARCH_U300 bool "ST-Ericsson U300 Series" depends on ARCH_MULTI_V5 && MMU - select ARCH_REQUIRE_GPIOLIB select ARM_AMBA select ARM_VIC select U300_TIMER select CPU_ARM926T + select GPIOLIB select HAVE_TCM select PINCTRL select PINCTRL_COH901 diff --git a/arch/arm/mach-uniphier/platsmp.c b/arch/arm/mach-uniphier/platsmp.c index e802ca836ec7..9978c41128f6 100644 --- a/arch/arm/mach-uniphier/platsmp.c +++ b/arch/arm/mach-uniphier/platsmp.c @@ -101,21 +101,13 @@ static int __init uniphier_smp_prepare_trampoline(unsigned int max_cpus) np = of_find_compatible_node(NULL, NULL, "socionext,uniphier-smpctrl"); ret = of_address_to_resource(np, 0, &res); of_node_put(np); - if (!ret) { - rom_rsv2_phys = res.start + UNIPHIER_SMPCTRL_ROM_RSV2; - } else { - /* try old binding too */ - np = of_find_compatible_node(NULL, NULL, - "socionext,uniphier-system-bus-controller"); - ret = of_address_to_resource(np, 1, &res); - of_node_put(np); - if (ret) { - pr_err("failed to get resource of SMP control\n"); - return ret; - } - rom_rsv2_phys = res.start + 0x1000 + UNIPHIER_SMPCTRL_ROM_RSV2; + if (ret) { + pr_err("failed to get resource of SMP control\n"); + return ret; } + rom_rsv2_phys = res.start + UNIPHIER_SMPCTRL_ROM_RSV2; + ret = uniphier_smp_copy_trampoline(rom_rsv2_phys); if (ret) return ret; diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index 3185081bdb2c..4740ac393297 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -3,13 +3,13 @@ menuconfig ARCH_U8500 depends on ARCH_MULTI_V7 && MMU select AB8500_CORE select ABX500_CORE - select ARCH_REQUIRE_GPIOLIB select ARM_AMBA select ARM_ERRATA_754322 select ARM_ERRATA_764369 if SMP select ARM_GIC select CACHE_L2X0 select CLKSRC_NOMADIK_MTU + select GPIOLIB select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP select PINCTRL diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig index 398a297b7e09..7c728ebc0b33 100644 --- a/arch/arm/mach-vexpress/Kconfig +++ b/arch/arm/mach-vexpress/Kconfig @@ -1,13 +1,13 @@ menuconfig ARCH_VEXPRESS bool "ARM Ltd. Versatile Express family" depends on ARCH_MULTI_V7 - select ARCH_REQUIRE_GPIOLIB select ARCH_SUPPORTS_BIG_ENDIAN select ARM_AMBA select ARM_GIC select ARM_GLOBAL_TIMER select ARM_TIMER_SP804 select COMMON_CLK_VERSATILE + select GPIOLIB select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP select HAVE_PATA_PLATFORM diff --git a/arch/arm/mach-vexpress/hotplug.c b/arch/arm/mach-vexpress/hotplug.c index f2fafc10a91d..d8f1a05f5e87 100644 --- a/arch/arm/mach-vexpress/hotplug.c +++ b/arch/arm/mach-vexpress/hotplug.c @@ -15,6 +15,8 @@ #include <asm/smp_plat.h> #include <asm/cp15.h> +#include "core.h" + static inline void cpu_enter_lowpower(void) { unsigned int v; diff --git a/arch/arm/mach-vexpress/spc.c b/arch/arm/mach-vexpress/spc.c index 8409cab3f760..fe488523694c 100644 --- a/arch/arm/mach-vexpress/spc.c +++ b/arch/arm/mach-vexpress/spc.c @@ -31,6 +31,8 @@ #include <asm/cacheflush.h> +#include "spc.h" + #define SPCLOG "vexpress-spc: " #define PERF_LVL_A15 0x00 @@ -319,17 +321,15 @@ static int ve_spc_waitforcompletion(int req_type) static int ve_spc_set_performance(int cluster, u32 freq) { - u32 perf_cfg_reg, perf_stat_reg; + u32 perf_cfg_reg; int ret, perf, req_type; if (cluster_is_a15(cluster)) { req_type = CA15_DVFS; perf_cfg_reg = PERF_LVL_A15; - perf_stat_reg = PERF_REQ_A15; } else { req_type = CA7_DVFS; perf_cfg_reg = PERF_LVL_A7; - perf_stat_reg = PERF_REQ_A7; } perf = ve_spc_find_performance_index(cluster, freq); diff --git a/arch/arm/mach-vt8500/Kconfig b/arch/arm/mach-vt8500/Kconfig index aaaa24fe4d71..c4f1dba7bd8a 100644 --- a/arch/arm/mach-vt8500/Kconfig +++ b/arch/arm/mach-vt8500/Kconfig @@ -1,6 +1,6 @@ config ARCH_VT8500 bool - select ARCH_REQUIRE_GPIOLIB + select GPIOLIB select CLKDEV_LOOKUP select VT8500_TIMER select PINCTRL diff --git a/arch/arm/plat-iop/setup.c b/arch/arm/plat-iop/setup.c index 5b217f460f18..8151bde990e6 100644 --- a/arch/arm/plat-iop/setup.c +++ b/arch/arm/plat-iop/setup.c @@ -20,12 +20,12 @@ * the IOP3xx OCCDR must be mapped uncached and unbuffered. */ static struct map_desc iop3xx_std_desc[] __initdata = { - { /* mem mapped registers */ + { /* mem mapped registers */ .virtual = IOP3XX_PERIPHERAL_VIRT_BASE, .pfn = __phys_to_pfn(IOP3XX_PERIPHERAL_PHYS_BASE), .length = IOP3XX_PERIPHERAL_SIZE, .type = MT_UNCACHED, - }, + }, }; void __init iop3xx_map_io(void) diff --git a/arch/arm/plat-samsung/include/plat/cpu-freq-core.h b/arch/arm/plat-samsung/include/plat/cpu-freq-core.h index 317c52303288..37cf20e04aff 100644 --- a/arch/arm/plat-samsung/include/plat/cpu-freq-core.h +++ b/arch/arm/plat-samsung/include/plat/cpu-freq-core.h @@ -39,7 +39,7 @@ struct s3c2410_iobank_timing { unsigned int tacs; unsigned int tcos; unsigned int tacc; - unsigned int tcoh; /* nCS hold afrer nOE/nWE */ + unsigned int tcoh; /* nCS hold after nOE/nWE */ unsigned int tcah; /* Address hold after nCS */ unsigned char nwait_en; /* nWait enabled for bank. */ }; diff --git a/arch/arm/plat-samsung/include/plat/fb-s3c2410.h b/arch/arm/plat-samsung/include/plat/fb-s3c2410.h index 4e5d9588b5ba..1f2972a74e9f 100644 --- a/arch/arm/plat-samsung/include/plat/fb-s3c2410.h +++ b/arch/arm/plat-samsung/include/plat/fb-s3c2410.h @@ -48,7 +48,7 @@ struct s3c2410fb_display { struct s3c2410fb_mach_info { - struct s3c2410fb_display *displays; /* attached diplays info */ + struct s3c2410fb_display *displays; /* attached displays info */ unsigned num_displays; /* number of defined displays */ unsigned default_display; diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg.h b/arch/arm/plat-samsung/include/plat/gpio-cfg.h index b5294eff18b5..21391faab068 100644 --- a/arch/arm/plat-samsung/include/plat/gpio-cfg.h +++ b/arch/arm/plat-samsung/include/plat/gpio-cfg.h @@ -35,7 +35,7 @@ struct samsung_gpio_chip; * struct samsung_gpio_cfg GPIO configuration * @cfg_eint: Configuration setting when used for external interrupt source * @get_pull: Read the current pull configuration for the GPIO - * @set_pull: Set the current pull configuraiton for the GPIO + * @set_pull: Set the current pull configuration for the GPIO * @set_config: Set the current configuration for the GPIO * @get_config: Read the current configuration for the GPIO * diff --git a/arch/arm/plat-samsung/pm-check.c b/arch/arm/plat-samsung/pm-check.c index 70f2f699bed3..d63516374f7c 100644 --- a/arch/arm/plat-samsung/pm-check.c +++ b/arch/arm/plat-samsung/pm-check.c @@ -5,7 +5,7 @@ * http://armlinux.simtec.co.uk * Ben Dooks <ben@simtec.co.uk> * - * S3C Power Mangament - suspend/resume memory corruptiuon check. + * S3C Power Mangament - suspend/resume memory corruption check. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/arch/arm/plat-samsung/watchdog-reset.c b/arch/arm/plat-samsung/watchdog-reset.c index 2ecb50bea044..307d8ad96a78 100644 --- a/arch/arm/plat-samsung/watchdog-reset.c +++ b/arch/arm/plat-samsung/watchdog-reset.c @@ -3,7 +3,7 @@ * Copyright (c) 2008 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * - * Coyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com> + * Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com> * * Watchdog reset support for Samsung SoCs. * diff --git a/arch/arm/plat-versatile/platsmp.c b/arch/arm/plat-versatile/platsmp.c index 53feb90c840c..c2366510187a 100644 --- a/arch/arm/plat-versatile/platsmp.c +++ b/arch/arm/plat-versatile/platsmp.c @@ -18,6 +18,8 @@ #include <asm/cacheflush.h> #include <asm/smp_plat.h> +#include <plat/platsmp.h> + /* * Write pen_release in a way that is guaranteed to be visible to all * observers, irrespective of whether they're taking part in coherency diff --git a/drivers/bus/mvebu-mbus.c b/drivers/bus/mvebu-mbus.c index ce54a0160faa..c7f396903184 100644 --- a/drivers/bus/mvebu-mbus.c +++ b/drivers/bus/mvebu-mbus.c @@ -117,7 +117,7 @@ struct mvebu_mbus_soc_data { unsigned int (*win_remap_offset)(const int win); void (*setup_cpu_target)(struct mvebu_mbus_state *s); int (*save_cpu_target)(struct mvebu_mbus_state *s, - u32 *store_addr); + u32 __iomem *store_addr); int (*show_cpu_target)(struct mvebu_mbus_state *s, struct seq_file *seq, void *v); }; @@ -728,7 +728,7 @@ mvebu_mbus_default_setup_cpu_target(struct mvebu_mbus_state *mbus) static int mvebu_mbus_default_save_cpu_target(struct mvebu_mbus_state *mbus, - u32 *store_addr) + u32 __iomem *store_addr) { int i; @@ -780,7 +780,7 @@ mvebu_mbus_dove_setup_cpu_target(struct mvebu_mbus_state *mbus) static int mvebu_mbus_dove_save_cpu_target(struct mvebu_mbus_state *mbus, - u32 *store_addr) + u32 __iomem *store_addr) { int i; @@ -796,7 +796,7 @@ mvebu_mbus_dove_save_cpu_target(struct mvebu_mbus_state *mbus, return 4; } -int mvebu_mbus_save_cpu_target(u32 *store_addr) +int mvebu_mbus_save_cpu_target(u32 __iomem *store_addr) { return mbus_state.soc->save_cpu_target(&mbus_state, store_addr); } @@ -1089,7 +1089,7 @@ static void mvebu_mbus_resume(void) } } -struct syscore_ops mvebu_mbus_syscore_ops = { +static struct syscore_ops mvebu_mbus_syscore_ops = { .suspend = mvebu_mbus_suspend, .resume = mvebu_mbus_resume, }; diff --git a/drivers/power/reset/vexpress-poweroff.c b/drivers/power/reset/vexpress-poweroff.c index 6a9bf7089373..102f95a09460 100644 --- a/drivers/power/reset/vexpress-poweroff.c +++ b/drivers/power/reset/vexpress-poweroff.c @@ -74,8 +74,8 @@ static ssize_t vexpress_reset_active_store(struct device *dev, return err ? err : count; } -DEVICE_ATTR(active, S_IRUGO | S_IWUSR, vexpress_reset_active_show, - vexpress_reset_active_store); +static DEVICE_ATTR(active, S_IRUGO | S_IWUSR, vexpress_reset_active_show, + vexpress_reset_active_store); enum vexpress_reset_func { FUNC_RESET, FUNC_SHUTDOWN, FUNC_REBOOT }; diff --git a/include/linux/mbus.h b/include/linux/mbus.h index ea34a867caa0..d610232762e3 100644 --- a/include/linux/mbus.h +++ b/include/linux/mbus.h @@ -66,7 +66,7 @@ static inline const struct mbus_dram_target_info *mv_mbus_dram_info_nooverlap(vo } #endif -int mvebu_mbus_save_cpu_target(u32 *store_addr); +int mvebu_mbus_save_cpu_target(u32 __iomem *store_addr); void mvebu_mbus_get_pcie_mem_aperture(struct resource *res); void mvebu_mbus_get_pcie_io_aperture(struct resource *res); int mvebu_mbus_get_dram_win_info(phys_addr_t phyaddr, u8 *target, u8 *attr); |