diff options
| -rw-r--r-- | Documentation/devicetree/bindings/spi/omap-spi.txt | 20 | ||||
| -rw-r--r-- | Documentation/spi/spi-summary | 58 | ||||
| -rw-r--r-- | drivers/spi/Kconfig | 36 | ||||
| -rw-r--r-- | drivers/spi/Makefile | 4 | ||||
| -rw-r--r-- | drivers/spi/spi-bcm63xx.c | 486 | ||||
| -rw-r--r-- | drivers/spi/spi-dw-pci.c | 2 | ||||
| -rw-r--r-- | drivers/spi/spi-fsl-espi.c | 14 | ||||
| -rw-r--r-- | drivers/spi/spi-imx.c | 11 | ||||
| -rw-r--r-- | drivers/spi/spi-nuc900.c | 2 | ||||
| -rw-r--r-- | drivers/spi/spi-omap2-mcspi.c | 56 | ||||
| -rw-r--r-- | drivers/spi/spi-pl022.c | 286 | ||||
| -rw-r--r-- | drivers/spi/spi-pxa2xx-pci.c | 2 | ||||
| -rw-r--r-- | drivers/spi/spi-rspi.c | 521 | ||||
| -rw-r--r-- | drivers/spi/spi-s3c64xx.c | 232 | ||||
| -rw-r--r-- | drivers/spi/spi-sh-hspi.c | 331 | ||||
| -rw-r--r-- | drivers/spi/spi-sh.c | 25 | ||||
| -rw-r--r-- | drivers/spi/spi-sirf.c | 687 | ||||
| -rw-r--r-- | drivers/spi/spi-topcliff-pch.c | 113 | ||||
| -rw-r--r-- | drivers/spi/spi.c | 347 | ||||
| -rw-r--r-- | include/linux/amba/pl022.h | 3 | ||||
| -rw-r--r-- | include/linux/spi/sh_hspi.h | 23 | ||||
| -rw-r--r-- | include/linux/spi/spi.h | 53 |
22 files changed, 2890 insertions, 422 deletions
diff --git a/Documentation/devicetree/bindings/spi/omap-spi.txt b/Documentation/devicetree/bindings/spi/omap-spi.txt new file mode 100644 index 000000000000..81df374adbb9 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/omap-spi.txt @@ -0,0 +1,20 @@ +OMAP2+ McSPI device + +Required properties: +- compatible : + - "ti,omap2-spi" for OMAP2 & OMAP3. + - "ti,omap4-spi" for OMAP4+. +- ti,spi-num-cs : Number of chipselect supported by the instance. +- ti,hwmods: Name of the hwmod associated to the McSPI + + +Example: + +mcspi1: mcspi@1 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "ti,omap4-mcspi"; + ti,hwmods = "mcspi1"; + ti,spi-num-cs = <4>; +}; + diff --git a/Documentation/spi/spi-summary b/Documentation/spi/spi-summary index 4884cb33845d..7312ec14dd89 100644 --- a/Documentation/spi/spi-summary +++ b/Documentation/spi/spi-summary @@ -1,7 +1,7 @@ Overview of Linux kernel SPI support ==================================== -21-May-2007 +02-Feb-2012 What is SPI? ------------ @@ -483,9 +483,9 @@ also initialize its own internal state. (See below about bus numbering and those methods.) After you initialize the spi_master, then use spi_register_master() to -publish it to the rest of the system. At that time, device nodes for -the controller and any predeclared spi devices will be made available, -and the driver model core will take care of binding them to drivers. +publish it to the rest of the system. At that time, device nodes for the +controller and any predeclared spi devices will be made available, and +the driver model core will take care of binding them to drivers. If you need to remove your SPI controller driver, spi_unregister_master() will reverse the effect of spi_register_master(). @@ -521,21 +521,53 @@ SPI MASTER METHODS ** When you code setup(), ASSUME that the controller ** is actively processing transfers for another device. - master->transfer(struct spi_device *spi, struct spi_message *message) - This must not sleep. Its responsibility is arrange that the - transfer happens and its complete() callback is issued. The two - will normally happen later, after other transfers complete, and - if the controller is idle it will need to be kickstarted. - master->cleanup(struct spi_device *spi) Your controller driver may use spi_device.controller_state to hold state it dynamically associates with that device. If you do that, be sure to provide the cleanup() method to free that state. + master->prepare_transfer_hardware(struct spi_master *master) + This will be called by the queue mechanism to signal to the driver + that a message is coming in soon, so the subsystem requests the + driver to prepare the transfer hardware by issuing this call. + This may sleep. + + master->unprepare_transfer_hardware(struct spi_master *master) + This will be called by the queue mechanism to signal to the driver + that there are no more messages pending in the queue and it may + relax the hardware (e.g. by power management calls). This may sleep. + + master->transfer_one_message(struct spi_master *master, + struct spi_message *mesg) + The subsystem calls the driver to transfer a single message while + queuing transfers that arrive in the meantime. When the driver is + finished with this message, it must call + spi_finalize_current_message() so the subsystem can issue the next + transfer. This may sleep. + + DEPRECATED METHODS + + master->transfer(struct spi_device *spi, struct spi_message *message) + This must not sleep. Its responsibility is arrange that the + transfer happens and its complete() callback is issued. The two + will normally happen later, after other transfers complete, and + if the controller is idle it will need to be kickstarted. This + method is not used on queued controllers and must be NULL if + transfer_one_message() and (un)prepare_transfer_hardware() are + implemented. + SPI MESSAGE QUEUE -The bulk of the driver will be managing the I/O queue fed by transfer(). +If you are happy with the standard queueing mechanism provided by the +SPI subsystem, just implement the queued methods specified above. Using +the message queue has the upside of centralizing a lot of code and +providing pure process-context execution of methods. The message queue +can also be elevated to realtime priority on high-priority SPI traffic. + +Unless the queueing mechanism in the SPI subsystem is selected, the bulk +of the driver will be managing the I/O queue fed by the now deprecated +function transfer(). That queue could be purely conceptual. For example, a driver used only for low-frequency sensor access might be fine using synchronous PIO. @@ -561,4 +593,6 @@ Stephen Street Mark Underwood Andrew Victor Vitaly Wool - +Grant Likely +Mark Brown +Linus Walleij diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 8293658e7cf9..0b06e360628a 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -94,6 +94,12 @@ config SPI_AU1550 If you say yes to this option, support will be included for the PSC SPI controller found on Au1550, Au1200 and Au1300 series. +config SPI_BCM63XX + tristate "Broadcom BCM63xx SPI controller" + depends on BCM63XX + help + Enable support for the SPI controller on the Broadcom BCM63xx SoCs. + config SPI_BITBANG tristate "Utilities for Bitbanging SPI masters" help @@ -126,7 +132,7 @@ config SPI_COLDFIRE_QSPI config SPI_DAVINCI tristate "Texas Instruments DaVinci/DA8x/OMAP-L/AM1x SoC SPI controller" - depends on SPI_MASTER && ARCH_DAVINCI + depends on ARCH_DAVINCI select SPI_BITBANG help SPI master controller for DaVinci/DA8x/OMAP-L/AM1x SPI modules. @@ -188,7 +194,7 @@ config SPI_MPC52xx_PSC config SPI_MPC512x_PSC tristate "Freescale MPC512x PSC SPI controller" - depends on SPI_MASTER && PPC_MPC512x + depends on PPC_MPC512x help This enables using the Freescale MPC5121 Programmable Serial Controller in SPI master mode. @@ -238,7 +244,7 @@ config SPI_OMAP24XX config SPI_OMAP_100K tristate "OMAP SPI 100K" - depends on SPI_MASTER && (ARCH_OMAP850 || ARCH_OMAP730) + depends on ARCH_OMAP850 || ARCH_OMAP730 help OMAP SPI 100K master controller for omap7xx boards. @@ -262,7 +268,7 @@ config SPI_PL022 config SPI_PPC4xx tristate "PPC4xx SPI Controller" - depends on PPC32 && 4xx && SPI_MASTER + depends on PPC32 && 4xx select SPI_BITBANG help This selects a driver for the PPC4xx SPI Controller. @@ -279,6 +285,12 @@ config SPI_PXA2XX config SPI_PXA2XX_PCI def_bool SPI_PXA2XX && X86_32 && PCI +config SPI_RSPI + tristate "Renesas RSPI controller" + depends on SUPERH + help + SPI driver for Renesas RSPI blocks. + config SPI_S3C24XX tristate "Samsung S3C24XX series SPI" depends on ARCH_S3C2410 && EXPERIMENTAL @@ -324,9 +336,22 @@ config SPI_SH_SCI help SPI driver for SuperH SCI blocks. +config SPI_SH_HSPI + tristate "SuperH HSPI controller" + depends on ARCH_SHMOBILE + help + SPI driver for SuperH HSPI blocks. + +config SPI_SIRF + tristate "CSR SiRFprimaII SPI controller" + depends on ARCH_PRIMA2 + select SPI_BITBANG + help + SPI driver for CSR SiRFprimaII SoCs + config SPI_STMP3XXX tristate "Freescale STMP37xx/378x SPI/SSP controller" - depends on ARCH_STMP3XXX && SPI_MASTER + depends on ARCH_STMP3XXX help SPI driver for Freescale STMP37xx/378x SoC SSP interface @@ -384,7 +409,6 @@ config SPI_NUC900 config SPI_DESIGNWARE tristate "DesignWare SPI controller core support" - depends on SPI_MASTER help general driver for SPI controller core from DesignWare diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index 61c3261c388c..a1d48e0ba3dc 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -14,6 +14,7 @@ obj-$(CONFIG_SPI_ALTERA) += spi-altera.o obj-$(CONFIG_SPI_ATMEL) += spi-atmel.o obj-$(CONFIG_SPI_ATH79) += spi-ath79.o obj-$(CONFIG_SPI_AU1550) += spi-au1550.o +obj-$(CONFIG_SPI_BCM63XX) += spi-bcm63xx.o obj-$(CONFIG_SPI_BFIN) += spi-bfin5xx.o obj-$(CONFIG_SPI_BFIN_SPORT) += spi-bfin-sport.o obj-$(CONFIG_SPI_BITBANG) += spi-bitbang.o @@ -44,13 +45,16 @@ obj-$(CONFIG_SPI_PL022) += spi-pl022.o obj-$(CONFIG_SPI_PPC4xx) += spi-ppc4xx.o obj-$(CONFIG_SPI_PXA2XX) += spi-pxa2xx.o obj-$(CONFIG_SPI_PXA2XX_PCI) += spi-pxa2xx-pci.o +obj-$(CONFIG_SPI_RSPI) += spi-rspi.o obj-$(CONFIG_SPI_S3C24XX) += spi-s3c24xx-hw.o spi-s3c24xx-hw-y := spi-s3c24xx.o spi-s3c24xx-hw-$(CONFIG_SPI_S3C24XX_FIQ) += spi-s3c24xx-fiq.o obj-$(CONFIG_SPI_S3C64XX) += spi-s3c64xx.o obj-$(CONFIG_SPI_SH) += spi-sh.o +obj-$(CONFIG_SPI_SH_HSPI) += spi-sh-hspi.o obj-$(CONFIG_SPI_SH_MSIOF) += spi-sh-msiof.o obj-$(CONFIG_SPI_SH_SCI) += spi-sh-sci.o +obj-$(CONFIG_SPI_SIRF) += spi-sirf.o obj-$(CONFIG_SPI_STMP3XXX) += spi-stmp.o obj-$(CONFIG_SPI_TEGRA) += spi-tegra.o obj-$(CONFIG_SPI_TI_SSP) += spi-ti-ssp.o diff --git a/drivers/spi/spi-bcm63xx.c b/drivers/spi/spi-bcm63xx.c new file mode 100644 index 000000000000..f01b2648452e --- /dev/null +++ b/drivers/spi/spi-bcm63xx.c @@ -0,0 +1,486 @@ +/* + * Broadcom BCM63xx SPI controller support + * + * Copyright (C) 2009-2011 Florian Fainelli <florian@openwrt.org> + * Copyright (C) 2010 Tanguy Bouzeloc <tanguy.bouzeloc@efixo.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the + * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/spi/spi.h> +#include <linux/completion.h> +#include <linux/err.h> + +#include <bcm63xx_dev_spi.h> + +#define PFX KBUILD_MODNAME +#define DRV_VER "0.1.2" + +struct bcm63xx_spi { + spinlock_t lock; + int stopping; + struct completion done; + + void __iomem *regs; + int irq; + + /* Platform data */ + u32 speed_hz; + unsigned fifo_size; + + /* Data buffers */ + const unsigned char *tx_ptr; + unsigned char *rx_ptr; + + /* data iomem */ + u8 __iomem *tx_io; + const u8 __iomem *rx_io; + + int remaining_bytes; + + struct clk *clk; + struct platform_device *pdev; +}; + +static inline u8 bcm_spi_readb(struct bcm63xx_spi *bs, + unsigned int offset) +{ + return bcm_readb(bs->regs + bcm63xx_spireg(offset)); +} + +static inline u16 bcm_spi_readw(struct bcm63xx_spi *bs, + unsigned int offset) +{ + return bcm_readw(bs->regs + bcm63xx_spireg(offset)); +} + +static inline void bcm_spi_writeb(struct bcm63xx_spi *bs, + u8 value, unsigned int offset) +{ + bcm_writeb(value, bs->regs + bcm63xx_spireg(offset)); +} + +static inline void bcm_spi_writew(struct bcm63xx_spi *bs, + u16 value, unsigned int offset) +{ + bcm_writew(value, bs->regs + bcm63xx_spireg(offset)); +} + +static const unsigned bcm63xx_spi_freq_table[SPI_CLK_MASK][2] = { + { 20000000, SPI_CLK_20MHZ }, + { 12500000, SPI_CLK_12_50MHZ }, + { 6250000, SPI_CLK_6_250MHZ }, + { 3125000, SPI_CLK_3_125MHZ }, + { 1563000, SPI_CLK_1_563MHZ }, + { 781000, SPI_CLK_0_781MHZ }, + { 391000, SPI_CLK_0_391MHZ } +}; + +static int bcm63xx_spi_setup_transfer(struct spi_device *spi, + struct spi_transfer *t) +{ + struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master); + u8 bits_per_word; + u8 clk_cfg, reg; + u32 hz; + int i; + + bits_per_word = (t) ? t->bits_per_word : spi->bits_per_word; + hz = (t) ? t->speed_hz : spi->max_speed_hz; + if (bits_per_word != 8) { + dev_err(&spi->dev, "%s, unsupported bits_per_word=%d\n", + __func__, bits_per_word); + return -EINVAL; + } + + if (spi->chip_select > spi->master->num_chipselect) { + dev_err(&spi->dev, "%s, unsupported slave %d\n", + __func__, spi->chip_select); + return -EINVAL; + } + + /* Find the closest clock configuration */ + for (i = 0; i < SPI_CLK_MASK; i++) { + if (hz <= bcm63xx_spi_freq_table[i][0]) { + clk_cfg = bcm63xx_spi_freq_table[i][1]; + break; + } + } + + /* No matching configuration found, default to lowest */ + if (i == SPI_CLK_MASK) + clk_cfg = SPI_CLK_0_391MHZ; + + /* clear existing clock configuration bits of the register */ + reg = bcm_spi_readb(bs, SPI_CLK_CFG); + reg &= ~SPI_CLK_MASK; + reg |= clk_cfg; + + bcm_spi_writeb(bs, reg, SPI_CLK_CFG); + dev_dbg(&spi->dev, "Setting clock register to %02x (hz %d)\n", + clk_cfg, hz); + + return 0; +} + +/* the spi->mode bits understood by this driver: */ +#define MODEBITS (SPI_CPOL | SPI_CPHA) + +static int bcm63xx_spi_setup(struct spi_device *spi) +{ + struct bcm63xx_spi *bs; + int ret; + + bs = spi_master_get_devdata(spi->master); + + if (bs->stopping) + return -ESHUTDOWN; + + if (!spi->bits_per_word) + spi->bits_per_word = 8; + + if (spi->mode & ~MODEBITS) { + dev_err(&spi->dev, "%s, unsupported mode bits %x\n", + __func__, spi->mode & ~MODEBITS); + return -EINVAL; + } + + ret = bcm63xx_spi_setup_transfer(spi, NULL); + if (ret < 0) { + dev_err(&spi->dev, "setup: unsupported mode bits %x\n", + spi->mode & ~MODEBITS); + return ret; + } + + dev_dbg(&spi->dev, "%s, mode %d, %u bits/w, %u nsec/bit\n", + __func__, spi->mode & MODEBITS, spi->bits_per_word, 0); + + return 0; +} + +/* Fill the TX FIFO with as many bytes as possible */ +static void bcm63xx_spi_fill_tx_fifo(struct bcm63xx_spi *bs) +{ + u8 size; + + /* Fill the Tx FIFO with as many bytes as possible */ + size = bs->remaining_bytes < bs->fifo_size ? bs->remaining_bytes : + bs->fifo_size; + memcpy_toio(bs->tx_io, bs->tx_ptr, size); + bs->remaining_bytes -= size; +} + +static int bcm63xx_txrx_bufs(struct spi_device *spi, struct spi_transfer *t) +{ + struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master); + u16 msg_ctl; + u16 cmd; + + dev_dbg(&spi->dev, "txrx: tx %p, rx %p, len %d\n", + t->tx_buf, t->rx_buf, t->len); + + /* Transmitter is inhibited */ + bs->tx_ptr = t->tx_buf; + bs->rx_ptr = t->rx_buf; + init_completion(&bs->done); + + if (t->tx_buf) { + bs->remaining_bytes = t->len; + bcm63xx_spi_fill_tx_fifo(bs); + } + + /* Enable the command done interrupt which + * we use to determine completion of a command */ + bcm_spi_writeb(bs, SPI_INTR_CMD_DONE, SPI_INT_MASK); + + /* Fill in the Message control register */ + msg_ctl = (t->len << SPI_BYTE_CNT_SHIFT); + + if (t->rx_buf && t->tx_buf) + msg_ctl |= (SPI_FD_RW << SPI_MSG_TYPE_SHIFT); + else if (t->rx_buf) + msg_ctl |= (SPI_HD_R << SPI_MSG_TYPE_SHIFT); + else if (t->tx_buf) + msg_ctl |= (SPI_HD_W << SPI_MSG_TYPE_SHIFT); + + bcm_spi_writew(bs, msg_ctl, SPI_MSG_CTL); + + /* Issue the transfer */ + cmd = SPI_CMD_START_IMMEDIATE; + cmd |= (0 << SPI_CMD_PREPEND_BYTE_CNT_SHIFT); + cmd |= (spi->chip_select << SPI_CMD_DEVICE_ID_SHIFT); + bcm_spi_writew(bs, cmd, SPI_CMD); + wait_for_completion(&bs->done); + + /* Disable the CMD_DONE interrupt */ + bcm_spi_writeb(bs, 0, SPI_INT_MASK); + + return t->len - bs->remaining_bytes; +} + +static int bcm63xx_transfer(struct spi_device *spi, struct spi_message *m) +{ + struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master); + struct spi_transfer *t; + int ret = 0; + + if (unlikely(list_empty(&m->transfers))) + return -EINVAL; + + if (bs->stopping) + return -ESHUTDOWN; + + list_for_each_entry(t, &m->transfers, transfer_list) { + ret += bcm63xx_txrx_bufs(spi, t); + } + + m->complete(m->context); + + return ret; +} + +/* This driver supports single master mode only. Hence + * CMD_DONE is the only interrupt we care about + */ +static irqreturn_t bcm63xx_spi_interrupt(int irq, void *dev_id) +{ + struct spi_master *master = (struct spi_master *)dev_id; + struct bcm63xx_spi *bs = spi_master_get_devdata(master); + u8 intr; + u16 cmd; + + /* Read interupts and clear them immediately */ + intr = bcm_spi_readb(bs, SPI_INT_STATUS); + bcm_spi_writeb(bs, SPI_INTR_CLEAR_ALL, SPI_INT_STATUS); + bcm_spi_writeb(bs, 0, SPI_INT_MASK); + + /* A tansfer completed */ + if (intr & SPI_INTR_CMD_DONE) { + u8 rx_tail; + + rx_tail = bcm_spi_readb(bs, SPI_RX_TAIL); + + /* Read out all the data */ + if (rx_tail) + memcpy_fromio(bs->rx_ptr, bs->rx_io, rx_tail); + + /* See if there is more data to send */ + if (bs->remaining_bytes > 0) { + bcm63xx_spi_fill_tx_fifo(bs); + + /* Start the transfer */ + bcm_spi_writew(bs, SPI_HD_W << SPI_MSG_TYPE_SHIFT, + SPI_MSG_CTL); + cmd = bcm_spi_readw(bs, SPI_CMD); + cmd |= SPI_CMD_START_IMMEDIATE; + cmd |= (0 << SPI_CMD_PREPEND_BYTE_CNT_SHIFT); + bcm_spi_writeb(bs, SPI_INTR_CMD_DONE, SPI_INT_MASK); + bcm_spi_writew(bs, cmd, SPI_CMD); + } else { + complete(&bs->done); + } + } + + return IRQ_HANDLED; +} + + +static int __devinit bcm63xx_spi_probe(struct platform_device *pdev) +{ + struct resource *r; + struct device *dev = &pdev->dev; + struct bcm63xx_spi_pdata *pdata = pdev->dev.platform_data; + int irq; + struct spi_master *master; + struct clk *clk; + struct bcm63xx_spi *bs; + int ret; + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!r) { + dev_err(dev, "no iomem\n"); + ret = -ENXIO; + goto out; + } + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(dev, "no irq\n"); + ret = -ENXIO; + goto out; + } + + clk = clk_get(dev, "spi"); + if (IS_ERR(clk)) { + dev_err(dev, "no clock for device\n"); + ret = PTR_ERR(clk); + goto out; + } + + master = spi_alloc_master(dev, sizeof(*bs)); + if (!master) { + dev_err(dev, "out of memory\n"); + ret = -ENOMEM; + goto out_clk; + } + + bs = spi_master_get_devdata(master); + init_completion(&bs->done); + + platform_set_drvdata(pdev, master); + bs->pdev = pdev; + + if (!devm_request_mem_region(&pdev->dev, r->start, + resource_size(r), PFX)) { + dev_err(dev, "iomem request failed\n"); + ret = -ENXIO; + goto out_err; + } + + bs->regs = devm_ioremap_nocache(&pdev->dev, r->start, + resource_size(r)); + if (!bs->regs) { + dev_err(dev, "unable to ioremap regs\n"); + ret = -ENOMEM; + goto out_err; + } + + bs->irq = irq; + bs->clk = clk; + bs->fifo_size = pdata->fifo_size; + + ret = devm_request_irq(&pdev->dev, irq, bcm63xx_spi_interrupt, 0, + pdev->name, master); + if (ret) { + dev_err(dev, "unable to request irq\n"); + goto out_err; + } + + master->bus_num = pdata->bus_num; + master->num_chipselect = pdata->num_chipselect; + master->setup = bcm63xx_spi_setup; + master->transfer = bcm63xx_transfer; + bs->speed_hz = pdata->speed_hz; + bs->stopping = 0; + bs->tx_io = (u8 *)(bs->regs + bcm63xx_spireg(SPI_MSG_DATA)); + bs->rx_io = (const u8 *)(bs->regs + bcm63xx_spireg(SPI_RX_DATA)); + spin_lock_init(&bs->lock); + + /* Initialize hardware */ + clk_enable(bs->clk); + bcm_spi_writeb(bs, SPI_INTR_CLEAR_ALL, SPI_INT_STATUS); + + /* register and we are done */ + ret = spi_register_master(master); + if (ret) { + dev_err(dev, "spi register failed\n"); + goto out_clk_disable; + } + + dev_info(dev, "at 0x%08x (irq %d, FIFOs size %d) v%s\n", + r->start, irq, bs->fifo_size, DRV_VER); + + return 0; + +out_clk_disable: + clk_disable(clk); +out_err: + platform_set_drvdata(pdev, NULL); + spi_master_put(master); +out_clk: + clk_put(clk); +out: + return ret; +} + +static int __devexit bcm63xx_spi_remove(struct platform_device *pdev) +{ + struct spi_master *master = platform_get_drvdata(pdev); + struct bcm63xx_spi *bs = spi_master_get_devdata(master); + + /* reset spi block */ + bcm_spi_writeb(bs, 0, SPI_INT_MASK); + spin_lock(&bs->lock); + bs->stopping = 1; + + /* HW shutdown */ + clk_disable(bs->clk); + clk_put(bs->clk); + + spin_unlock(&bs->lock); + platform_set_drvdata(pdev, 0); + spi_unregister_master(master); + + return 0; +} + +#ifdef CONFIG_PM +static int bcm63xx_spi_suspend(struct device *dev) +{ + struct spi_master *master = + platform_get_drvdata(to_platform_device(dev)); + struct bcm63xx_spi *bs = spi_master_get_devdata(master); + + clk_disable(bs->clk); + + return 0; +} + +static int bcm63xx_spi_resume(struct device *dev) +{ + struct spi_master *master = + platform_get_drvdata(to_platform_device(dev)); + struct bcm63xx_spi *bs = spi_master_get_devdata(master); + + clk_enable(bs->clk); + + return 0; +} + +static const struct dev_pm_ops bcm63xx_spi_pm_ops = { + .suspend = bcm63xx_spi_suspend, + .resume = bcm63xx_spi_resume, +}; + +#define BCM63XX_SPI_PM_OPS (&bcm63xx_spi_pm_ops) +#else +#define BCM63XX_SPI_PM_OPS NULL +#endif + +static struct platform_driver bcm63xx_spi_driver = { + .driver = { + .name = "bcm63xx-spi", + .owner = THIS_MODULE, + .pm = BCM63XX_SPI_PM_OPS, + }, + .probe = bcm63xx_spi_probe, + .remove = __devexit_p(bcm63xx_spi_remove), +}; + +module_platform_driver(bcm63xx_spi_driver); + +MODULE_ALIAS("platform:bcm63xx_spi"); +MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org>"); +MODULE_AUTHOR("Tanguy Bouzeloc <tanguy.bouzeloc@efixo.com>"); +MODULE_DESCRIPTION("Broadcom BCM63xx SPI Controller driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/spi/spi-dw-pci.c b/drivers/spi/spi-dw-pci.c index f64250ea1611..14f7cc9523f0 100644 --- a/drivers/spi/spi-dw-pci.c +++ b/drivers/spi/spi-dw-pci.c @@ -149,7 +149,7 @@ static int spi_resume(struct pci_dev *pdev) #define spi_resume NULL #endif -static const struct pci_device_id pci_ids[] __devinitdata = { +static DEFINE_PCI_DEVICE_TABLE(pci_ids) = { /* Intel MID platform SPI controller 0 */ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x0800) }, {}, diff --git a/drivers/spi/spi-fsl-espi.c b/drivers/spi/spi-fsl-espi.c index d770f03705c3..7523a2429d09 100644 --- a/drivers/spi/spi-fsl-espi.c +++ b/drivers/spi/spi-fsl-espi.c @@ -180,18 +180,20 @@ static int fsl_espi_setup_transfer(struct spi_device *spi, if ((mpc8xxx_spi->spibrg / hz) > 64) { cs->hw_mode |= CSMODE_DIV16; - pm = (mpc8xxx_spi->spibrg - 1) / (hz * 64) + 1; + pm = DIV_ROUND_UP(mpc8xxx_spi->spibrg, hz * 16 * 4); - WARN_ONCE(pm > 16, "%s: Requested speed is too low: %d Hz. " + WARN_ONCE(pm > 33, "%s: Requested speed is too low: %d Hz. " "Will use %d Hz instead.\n", dev_name(&spi->dev), - hz, mpc8xxx_spi->spibrg / 1024); - if (pm > 16) - pm = 16; + hz, mpc8xxx_spi->spibrg / (4 * 16 * (32 + 1))); + if (pm > 33) + pm = 33; } else { - pm = (mpc8xxx_spi->spibrg - 1) / (hz * 4) + 1; + pm = DIV_ROUND_UP(mpc8xxx_spi->spibrg, hz * 4); } if (pm) pm--; + if (pm < 2) + pm = 2; cs->hw_mode |= CSMODE_PM(pm); diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c index c6e697f5e007..31054e3de4c1 100644 --- a/drivers/spi/spi-imx.c +++ b/drivers/spi/spi-imx.c @@ -793,13 +793,8 @@ static int __devinit spi_imx_probe(struct platform_device *pdev) ret = gpio_request(spi_imx->chipselect[i], DRIVER_NAME); if (ret) { - while (i > 0) { - i--; - if (spi_imx->chipselect[i] >= 0) - gpio_free(spi_imx->chipselect[i]); - } dev_err(&pdev->dev, "can't get cs gpios\n"); - goto out_master_put; + goto out_gpio_free; } } @@ -881,10 +876,10 @@ out_iounmap: out_release_mem: release_mem_region(res->start, resource_size(res)); out_gpio_free: - for (i = 0; i < master->num_chipselect; i++) + while (--i >= 0) { if (spi_imx->chipselect[i] >= 0) gpio_free(spi_imx->chipselect[i]); -out_master_put: + } spi_master_put(master); kfree(master); platform_set_drvdata(pdev, NULL); diff --git a/drivers/spi/spi-nuc900.c b/drivers/spi/spi-nuc900.c index 182e9c873822..dae8be229c5d 100644 --- a/drivers/spi/spi-nuc900.c +++ b/drivers/spi/spi-nuc900.c @@ -360,8 +360,6 @@ static int __devinit nuc900_spi_probe(struct platform_device *pdev) } hw = spi_master_get_devdata(master); - memset(hw, 0, sizeof(struct nuc900_spi)); - hw->master = spi_master_get(master); hw->pdata = pdev->dev.platform_data; hw->dev = &pdev->dev; diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c index 0b0dfb71c640..bb9274c2526d 100644 --- a/drivers/spi/spi-omap2-mcspi.c +++ b/drivers/spi/spi-omap2-mcspi.c @@ -34,6 +34,8 @@ #include <linux/io.h> #include <linux/slab.h> #include <linux/pm_runtime.h> +#include <linux/of.h> +#include <linux/of_device.h> #include <linux/spi/spi.h> @@ -1079,15 +1081,39 @@ static int omap_mcspi_runtime_resume(struct device *dev) return 0; } +static struct omap2_mcspi_platform_config omap2_pdata = { + .regs_offset = 0, +}; + +static struct omap2_mcspi_platform_config omap4_pdata = { + .regs_offset = OMAP4_MCSPI_REG_OFFSET, +}; + +static const struct of_device_id omap_mcspi_of_match[] = { + { + .compatible = "ti,omap2-mcspi", + .data = &omap2_pdata, + }, + { + .compatible = "ti,omap4-mcspi", + .data = &omap4_pdata, + }, + { }, +}; +MODULE_DEVICE_TABLE(of, omap_mcspi_of_match); static int __init omap2_mcspi_probe(struct platform_device *pdev) { struct spi_master *master; - struct omap2_mcspi_platform_config *pdata = pdev->dev.platform_data; + struct omap2_mcspi_platform_config *pdata; struct omap2_mcspi *mcspi; struct resource *r; int status = 0, i; char wq_name[20]; + u32 regs_offset = 0; + static int bus_num = 1; + struct device_node *node = pdev->dev.of_node; + const struct of_device_id *match; master = spi_alloc_master(&pdev->dev, sizeof *mcspi); if (master == NULL) { @@ -1098,13 +1124,26 @@ static int __init omap2_mcspi_probe(struct platform_device *pdev) /* the spi->mode bits understood by this driver: */ master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH; - if (pdev->id != -1) - master->bus_num = pdev->id; - master->setup = omap2_mcspi_setup; master->transfer = omap2_mcspi_transfer; master->cleanup = omap2_mcspi_cleanup; - master->num_chipselect = pdata->num_cs; + master->dev.of_node = node; + + match = of_match_device(omap_mcspi_of_match, &pdev->dev); + if (match) { + u32 num_cs = 1; /* default number of chipselect */ + pdata = match->data; + + of_property_read_u32(node, "ti,spi-num-cs", &num_cs); + master->num_chipselect = num_cs; + master->bus_num = bus_num++; + } else { + pdata = pdev->dev.platform_data; + master->num_chipselect = pdata->num_cs; + if (pdev->id != -1) + master->bus_num = pdev->id; + } + regs_offset = pdata->regs_offset; dev_set_drvdata(&pdev->dev, master); @@ -1124,8 +1163,8 @@ static int __init omap2_mcspi_probe(struct platform_device *pdev) goto free_master; } - r->start += pdata->regs_offset; - r->end += pdata->regs_offset; + r->start += regs_offset; + r->end += regs_offset; mcspi->phys = r->start; if (!request_mem_region(r->start, resource_size(r), dev_name(&pdev->dev))) { @@ -1285,7 +1324,8 @@ static struct platform_driver omap2_mcspi_driver = { .driver = { .name = "omap2_mcspi", .owner = THIS_MODULE, - .pm = &omap2_mcspi_pm_ops + .pm = &omap2_mcspi_pm_ops, + .of_match_table = omap_mcspi_of_match, }, .remove = __exit_p(omap2_mcspi_remove), }; diff --git a/drivers/spi/spi-pl022.c b/drivers/spi/spi-pl022.c index f37ad2271ad5..dc8485d1e883 100644 --- a/drivers/spi/spi-pl022.c +++ b/drivers/spi/spi-pl022.c @@ -29,7 +29,6 @@ #include <linux/errno.h> #include <linux/interrupt.h> #include <linux/spi/spi.h> -#include <linux/workqueue.h> #include <linux/delay.h> #include <linux/clk.h> #include <linux/err.h> @@ -330,12 +329,13 @@ struct vendor_data { * @clk: outgoing clock "SPICLK" for the SPI bus * @master: SPI framework hookup * @master_info: controller-specific data from machine setup - * @workqueue: a workqueue on which any spi_message request is queued - * @pump_messages: work struct for scheduling work to the workqueue + * @kworker: thread struct for message pump + * @kworker_task: pointer to task for message pump kworker thread + * @pump_messages: work struct for scheduling work to the message pump * @queue_lock: spinlock to syncronise access to message queue * @queue: message queue - * @busy: workqueue is busy - * @running: workqueue is running + * @busy: message pump is busy + * @running: message pump is running * @pump_transfers: Tasklet used in Interrupt Transfer mode * @cur_msg: Pointer to current spi_message being processed * @cur_transfer: Pointer to current spi_transfer @@ -365,14 +365,7 @@ struct pl022 { struct clk *clk; struct spi_master *master; struct pl022_ssp_controller *master_info; - /* Driver message queue */ - struct workqueue_struct *workqueue; - struct work_struct pump_messages; - spinlock_t queue_lock; - struct list_head queue; - bool busy; - bool running; - /* Message transfer pump */ + /* Message per-transfer pump */ struct tasklet_struct pump_transfers; struct spi_message *cur_msg; struct spi_transfer *cur_transfer; @@ -394,6 +387,7 @@ struct pl022 { struct sg_table sgt_rx; struct sg_table sgt_tx; char *dummypage; + bool dma_running; #endif }; @@ -448,8 +442,6 @@ static void null_cs_control(u32 command) static void giveback(struct pl022 *pl022) { struct spi_transfer *last_transfer; - unsigned long flags; - struct spi_message *msg; pl022->next_msg_cs_active = false; last_transfer = list_entry(pl022->cur_msg->transfers.prev, @@ -477,15 +469,8 @@ static void giveback(struct pl022 *pl022) * sent the current message could be unloaded, which * could invalidate the cs_control() callback... */ - /* get a pointer to the next message, if any */ - spin_lock_irqsave(&pl022->queue_lock, flags); - if (list_empty(&pl022->queue)) - next_msg = NULL; - else - next_msg = list_entry(pl022->queue.next, - struct spi_message, queue); - spin_unlock_irqrestore(&pl022->queue_lock, flags); + next_msg = spi_get_next_queued_message(pl022->master); /* * see if the next and current messages point @@ -497,19 +482,13 @@ static void giveback(struct pl022 *pl022) pl022->cur_chip->cs_control(SSP_CHIP_DESELECT); else pl022->next_msg_cs_active = true; + } - spin_lock_irqsave(&pl022->queue_lock, flags); - msg = pl022->cur_msg; pl022->cur_msg = NULL; pl022->cur_transfer = NULL; pl022->cur_chip = NULL; - queue_work(pl022->workqueue, &pl022->pump_messages); - spin_unlock_irqrestore(&pl022->queue_lock, flags); - - msg->state = NULL; - if (msg->complete) - msg->complete(msg->context); + spi_finalize_current_message(pl022->master); } /** @@ -1063,6 +1042,7 @@ static int configure_dma(struct pl022 *pl022) dmaengine_submit(txdesc); dma_async_issue_pending(rxchan); dma_async_issue_pending(txchan); + pl022->dma_running = true; return 0; @@ -1141,11 +1121,12 @@ static void terminate_dma(struct pl022 *pl022) dmaengine_terminate_all(rxchan); dmaengine_terminate_all(txchan); unmap_free_dma_scatter(pl022); + pl022->dma_running = false; } static void pl022_dma_remove(struct pl022 *pl022) { - if (pl022->busy) + if (pl022->dma_running) terminate_dma(pl022); if (pl022->dma_tx_channel) dma_release_channel(pl022->dma_tx_channel); @@ -1493,73 +1474,20 @@ out: return; } -/** - * pump_messages - Workqueue function which processes spi message queue - * @data: pointer to private data of SSP driver - * - * This function checks if there is any spi message in the queue that - * needs processing and delegate control to appropriate function - * do_polling_transfer()/do_interrupt_dma_transfer() - * based on the kind of the transfer - * - */ -static void pump_messages(struct work_struct *work) +static int pl022_transfer_one_message(struct spi_master *master, + struct spi_message *msg) { - struct pl022 *pl022 = - container_of(work, struct pl022, pump_messages); - unsigned long flags; - bool was_busy = false; - - /* Lock queue and check for queue work */ - spin_lock_irqsave(&pl022->queue_lock, flags); - if (list_empty(&pl022->queue) || !pl022->running) { - if (pl022->busy) { - /* nothing more to do - disable spi/ssp and power off */ - writew((readw(SSP_CR1(pl022->virtbase)) & - (~SSP_CR1_MASK_SSE)), SSP_CR1(pl022->virtbase)); - - if (pl022->master_info->autosuspend_delay > 0) { - pm_runtime_mark_last_busy(&pl022->adev->dev); - pm_runtime_put_autosuspend(&pl022->adev->dev); - } else { - pm_runtime_put(&pl022->adev->dev); - } - } - pl022->busy = false; - spin_unlock_irqrestore(&pl022->queue_lock, flags); - return; - } - - /* Make sure we are not already running a message */ - if (pl022->cur_msg) { - spin_unlock_irqrestore(&pl022->queue_lock, flags); - return; - } - /* Extract head of queue */ - pl022->cur_msg = - list_entry(pl022->queue.next, struct spi_message, queue); - - list_del_init(&pl022->cur_msg->queue); - if (pl022->busy) - was_busy = true; - else - pl022->busy = true; - spin_unlock_irqrestore(&pl022->queue_lock, flags); + struct pl022 *pl022 = spi_master_get_devdata(master); /* Initial message state */ - pl022->cur_msg->state = STATE_START; - pl022->cur_transfer = list_entry(pl022->cur_msg->transfers.next, - struct spi_transfer, transfer_list); + pl022->cur_msg = msg; + msg->state = STATE_START; + + pl022->cur_transfer = list_entry(msg->transfers.next, + struct spi_transfer, transfer_list); /* Setup the SPI using the per chip configuration */ - pl022->cur_chip = spi_get_ctldata(pl022->cur_msg->spi); - if (!was_busy) - /* - * We enable the core voltage and clocks here, then the clocks - * and core will be disabled when this workqueue is run again - * and there is no more work to be done. - */ - pm_runtime_get_sync(&pl022->adev->dev); + pl022->cur_chip = spi_get_ctldata(msg->spi); restore_state(pl022); flush(pl022); @@ -1568,95 +1496,37 @@ static void pump_messages(struct work_struct *work) do_polling_transfer(pl022); else do_interrupt_dma_transfer(pl022); -} - -static int __init init_queue(struct pl022 *pl022) -{ - INIT_LIST_HEAD(&pl022->queue); - spin_lock_init(&pl022->queue_lock); - - pl022->running = false; - pl022->busy = false; - - tasklet_init(&pl022->pump_transfers, pump_transfers, - (unsigned long)pl022); - - INIT_WORK(&pl022->pump_messages, pump_messages); - pl022->workqueue = create_singlethread_workqueue( - dev_name(pl022->master->dev.parent)); - if (pl022->workqueue == NULL) - return -EBUSY; return 0; } -static int start_queue(struct pl022 *pl022) +static int pl022_prepare_transfer_hardware(struct spi_master *master) { - unsigned long flags; - - spin_lock_irqsave(&pl022->queue_lock, flags); - - if (pl022->running || pl022->busy) { - spin_unlock_irqrestore(&pl022->queue_lock, flags); - return -EBUSY; - } - - pl022->running = true; - pl022->cur_msg = NULL; - pl022->cur_transfer = NULL; - pl022->cur_chip = NULL; - pl022->next_msg_cs_active = false; - spin_unlock_irqrestore(&pl022->queue_lock, flags); - - queue_work(pl022->workqueue, &pl022->pump_messages); + struct pl022 *pl022 = spi_master_get_devdata(master); + /* + * Just make sure we have all we need to run the transfer by syncing + * with the runtime PM framework. + */ + pm_runtime_get_sync(&pl022->adev->dev); return 0; } -static int stop_queue(struct pl022 *pl022) +static int pl022_unprepare_transfer_hardware(struct spi_master *master) { - unsigned long flags; - unsigned limit = 500; - int status = 0; + struct pl022 *pl022 = spi_master_get_devdata(master); - spin_lock_irqsave(&pl022->queue_lock, flags); + /* nothing more to do - disable spi/ssp and power off */ + writew((readw(SSP_CR1(pl022->virtbase)) & + (~SSP_CR1_MASK_SSE)), SSP_CR1(pl022->virtbase)); - /* This is a bit lame, but is optimized for the common execution path. - * A wait_queue on the pl022->busy could be used, but then the common - * execution path (pump_messages) would be required to call wake_up or - * friends on every SPI message. Do this instead */ - while ((!list_empty(&pl022->queue) || pl022->busy) && limit--) { - spin_unlock_irqrestore(&pl022->queue_lock, flags); - msleep(10); - spin_lock_irqsave(&pl022->queue_lock, flags); + if (pl022->master_info->autosuspend_delay > 0) { + pm_runtime_mark_last_busy(&pl022->adev->dev); + pm_runtime_put_autosuspend(&pl022->adev->dev); + } else { + pm_runtime_put(&pl022->adev->dev); } - if (!list_empty(&pl022->queue) || pl022->busy) - status = -EBUSY; - else - pl022->running = false; - - spin_unlock_irqrestore(&pl022->queue_lock, flags); - - return status; -} - -static int destroy_queue(struct pl022 *pl022) -{ - int status; - - status = stop_queue(pl022); - /* we are unloading the module or failing to load (only two calls - * to this routine), and neither call can handle a return value. - * However, destroy_workqueue calls flush_workqueue, and that will - * block until all work is done. If the reason that stop_queue - * timed out is that the work will never finish, then it does no - * good to call destroy_workqueue, so return anyway. */ - if (status != 0) - return status; - - destroy_workqueue(pl022->workqueue); - return 0; } @@ -1776,38 +1646,6 @@ static int verify_controller_parameters(struct pl022 *pl022, return 0; } -/** - * pl022_transfer - transfer function registered to SPI master framework - * @spi: spi device which is requesting transfer - * @msg: spi message which is to handled is queued to driver queue - * - * This function is registered to the SPI framework for this SPI master - * controller. It will queue the spi_message in the queue of driver if - * the queue is not stopped and return. - */ -static int pl022_transfer(struct spi_device *spi, struct spi_message *msg) -{ - struct pl022 *pl022 = spi_master_get_devdata(spi->master); - unsigned long flags; - - spin_lock_irqsave(&pl022->queue_lock, flags); - - if (!pl022->running) { - spin_unlock_irqrestore(&pl022->queue_lock, flags); - return -ESHUTDOWN; - } - msg->actual_length = 0; - msg->status = -EINPROGRESS; - msg->state = STATE_START; - - list_add_tail(&msg->queue, &pl022->queue); - if (pl022->running && !pl022->busy) - queue_work(pl022->workqueue, &pl022->pump_messages); - - spin_unlock_irqrestore(&pl022->queue_lock, flags); - return 0; -} - static inline u32 spi_rate(u32 rate, u16 cpsdvsr, u16 scr) { return rate / (cpsdvsr * (1 + scr)); @@ -2170,7 +2008,10 @@ pl022_probe(struct amba_device *adev, const struct amba_id *id) master->num_chipselect = platform_info->num_chipselect; master->cleanup = pl022_cleanup; master->setup = pl022_setup; - master->transfer = pl022_transfer; + master->prepare_transfer_hardware = pl022_prepare_transfer_hardware; + master->transfer_one_message = pl022_transfer_one_message; + master->unprepare_transfer_hardware = pl022_unprepare_transfer_hardware; + master->rt = platform_info->rt; /* * Supports mode 0-3, loopback, and active low CS. Transfers are @@ -2214,6 +2055,10 @@ pl022_probe(struct amba_device *adev, const struct amba_id *id) goto err_no_clk_en; } + /* Initialize transfer pump */ + tasklet_init(&pl022->pump_transfers, pump_transfers, + (unsigned long)pl022); + /* Disable SSP */ writew((readw(SSP_CR1(pl022->virtbase)) & (~SSP_CR1_MASK_SSE)), SSP_CR1(pl022->virtbase)); @@ -2233,17 +2078,6 @@ pl022_probe(struct amba_device *adev, const struct amba_id *id) platform_info->enable_dma = 0; } - /* Initialize and start queue */ - status = init_queue(pl022); - if (status != 0) { - dev_err(&adev->dev, "probe - problem initializing queue\n"); - goto err_init_queue; - } - status = start_queue(pl022); - if (status != 0) { - dev_err(&adev->dev, "probe - problem starting queue\n"); - goto err_start_queue; - } /* Register with the SPI framework */ amba_set_drvdata(adev, pl022); status = spi_register_master(master); @@ -2269,9 +2103,6 @@ pl022_probe(struct amba_device *adev, const struct amba_id *id) return 0; err_spi_register: - err_start_queue: - err_init_queue: - destroy_queue(pl022); if (platform_info->enable_dma) pl022_dma_remove(pl022); @@ -2307,9 +2138,6 @@ pl022_remove(struct amba_device *adev) */ pm_runtime_get_noresume(&adev->dev); - /* Remove the queue */ - if (destroy_queue(pl022) != 0) - dev_err(&adev->dev, "queue remove failed\n"); load_ssp_default_config(pl022); if (pl022->master_info->enable_dma) pl022_dma_remove(pl022); @@ -2331,12 +2159,12 @@ pl022_remove(struct amba_device *adev) static int pl022_suspend(struct device *dev) { struct pl022 *pl022 = dev_get_drvdata(dev); - int status = 0; + int ret; - status = stop_queue(pl022); - if (status) { - dev_warn(dev, "suspend cannot stop queue\n"); - return status; + ret = spi_master_suspend(pl022->master); + if (ret) { + dev_warn(dev, "cannot suspend master\n"); + return ret; } dev_dbg(dev, "suspended\n"); @@ -2346,16 +2174,16 @@ static int pl022_suspend(struct device *dev) static int pl022_resume(struct device *dev) { struct pl022 *pl022 = dev_get_drvdata(dev); - int status = 0; + int ret; /* Start the queue running */ - status = start_queue(pl022); - if (status) - dev_err(dev, "problem starting queue (%d)\n", status); + ret = spi_master_resume(pl022->master); + if (ret) + dev_err(dev, "problem starting queue (%d)\n", ret); else dev_dbg(dev, "resumed\n"); - return status; + return ret; } #endif /* CONFIG_PM */ diff --git a/drivers/spi/spi-pxa2xx-pci.c b/drivers/spi/spi-pxa2xx-pci.c index 8caa07d58e69..3fb44afe27b4 100644 --- a/drivers/spi/spi-pxa2xx-pci.c +++ b/drivers/spi/spi-pxa2xx-pci.c @@ -151,7 +151,7 @@ static void __devexit ce4100_spi_remove(struct pci_dev *dev) kfree(spi_info); } -static struct pci_device_id ce4100_spi_devices[] __devinitdata = { +static DEFINE_PCI_DEVICE_TABLE(ce4100_spi_devices) = { { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x2e6a) }, { }, }; diff --git a/drivers/spi/spi-rspi.c b/drivers/spi/spi-rspi.c new file mode 100644 index 000000000000..354f170eab95 --- /dev/null +++ b/drivers/spi/spi-rspi.c @@ -0,0 +1,521 @@ +/* + * SH RSPI driver + * + * Copyright (C) 2012 Renesas Solutions Corp. + * + * Based on spi-sh.c: + * Copyright (C) 2011 Renesas Solutions Corp. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/errno.h> +#include <linux/list.h> +#include <linux/workqueue.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/clk.h> +#include <linux/spi/spi.h> + +#define RSPI_SPCR 0x00 +#define RSPI_SSLP 0x01 +#define RSPI_SPPCR 0x02 +#define RSPI_SPSR 0x03 +#define RSPI_SPDR 0x04 +#define RSPI_SPSCR 0x08 +#define RSPI_SPSSR 0x09 +#define RSPI_SPBR 0x0a +#define RSPI_SPDCR 0x0b +#define RSPI_SPCKD 0x0c +#define RSPI_SSLND 0x0d +#define RSPI_SPND 0x0e +#define RSPI_SPCR2 0x0f +#define RSPI_SPCMD0 0x10 +#define RSPI_SPCMD1 0x12 +#define RSPI_SPCMD2 0x14 +#define RSPI_SPCMD3 0x16 +#define RSPI_SPCMD4 0x18 +#define RSPI_SPCMD5 0x1a +#define RSPI_SPCMD6 0x1c +#define RSPI_SPCMD7 0x1e + +/* SPCR */ +#define SPCR_SPRIE 0x80 +#define SPCR_SPE 0x40 +#define SPCR_SPTIE 0x20 +#define SPCR_SPEIE 0x10 +#define SPCR_MSTR 0x08 +#define SPCR_MODFEN 0x04 +#define SPCR_TXMD 0x02 +#define SPCR_SPMS 0x01 + +/* SSLP */ +#define SSLP_SSL1P 0x02 +#define SSLP_SSL0P 0x01 + +/* SPPCR */ +#define SPPCR_MOIFE 0x20 +#define SPPCR_MOIFV 0x10 +#define SPPCR_SPOM 0x04 +#define SPPCR_SPLP2 0x02 +#define SPPCR_SPLP 0x01 + +/* SPSR */ +#define SPSR_SPRF 0x80 +#define SPSR_SPTEF 0x20 +#define SPSR_PERF 0x08 +#define SPSR_MODF 0x04 +#define SPSR_IDLNF 0x02 +#define SPSR_OVRF 0x01 + +/* SPSCR */ +#define SPSCR_SPSLN_MASK 0x07 + +/* SPSSR */ +#define SPSSR_SPECM_MASK 0x70 +#define SPSSR_SPCP_MASK 0x07 + +/* SPDCR */ +#define SPDCR_SPLW 0x20 +#define SPDCR_SPRDTD 0x10 +#define SPDCR_SLSEL1 0x08 +#define SPDCR_SLSEL0 0x04 +#define SPDCR_SLSEL_MASK 0x0c +#define SPDCR_SPFC1 0x02 +#define SPDCR_SPFC0 0x01 + +/* SPCKD */ +#define SPCKD_SCKDL_MASK 0x07 + +/* SSLND */ +#define SSLND_SLNDL_MASK 0x07 + +/* SPND */ +#define SPND_SPNDL_MASK 0x07 + +/* SPCR2 */ +#define SPCR2_PTE 0x08 +#define SPCR2_SPIE 0x04 +#define SPCR2_SPOE 0x02 +#define SPCR2_SPPE 0x01 + +/* SPCMDn */ +#define SPCMD_SCKDEN 0x8000 +#define SPCMD_SLNDEN 0x4000 +#define SPCMD_SPNDEN 0x2000 +#define SPCMD_LSBF 0x1000 +#define SPCMD_SPB_MASK 0x0f00 +#define SPCMD_SPB_8_TO_16(bit) (((bit - 1) << 8) & SPCMD_SPB_MASK) +#define SPCMD_SPB_20BIT 0x0000 +#define SPCMD_SPB_24BIT 0x0100 +#define SPCMD_SPB_32BIT 0x0200 +#define SPCMD_SSLKP 0x0080 +#define SPCMD_SSLA_MASK 0x0030 +#define SPCMD_BRDV_MASK 0x000c +#define SPCMD_CPOL 0x0002 +#define SPCMD_CPHA 0x0001 + +struct rspi_data { + void __iomem *addr; + u32 max_speed_hz; + struct spi_master *master; + struct list_head queue; + struct work_struct ws; + wait_queue_head_t wait; + spinlock_t lock; + struct clk *clk; + unsigned char spsr; +}; + +static void rspi_write8(struct rspi_data *rspi, u8 data, u16 offset) +{ + iowrite8(data, rspi->addr + offset); +} + +static void rspi_write16(struct rspi_data *rspi, u16 data, u16 offset) +{ + iowrite16(data, rspi->addr + offset); +} + +static u8 rspi_read8(struct rspi_data *rspi, u16 offset) +{ + return ioread8(rspi->addr + offset); +} + +static u16 rspi_read16(struct rspi_data *rspi, u16 offset) +{ + return ioread16(rspi->addr + offset); +} + +static unsigned char rspi_calc_spbr(struct rspi_data *rspi) +{ + int tmp; + unsigned char spbr; + + tmp = clk_get_rate(rspi->clk) / (2 * rspi->max_speed_hz) - 1; + spbr = clamp(tmp, 0, 255); + + return spbr; +} + +static void rspi_enable_irq(struct rspi_data *rspi, u8 enable) +{ + rspi_write8(rspi, rspi_read8(rspi, RSPI_SPCR) | enable, RSPI_SPCR); +} + +static void rspi_disable_irq(struct rspi_data *rspi, u8 disable) +{ + rspi_write8(rspi, rspi_read8(rspi, RSPI_SPCR) & ~disable, RSPI_SPCR); +} + +static int rspi_wait_for_interrupt(struct rspi_data *rspi, u8 wait_mask, + u8 enable_bit) +{ + int ret; + + rspi->spsr = rspi_read8(rspi, RSPI_SPSR); + rspi_enable_irq(rspi, enable_bit); + ret = wait_event_timeout(rspi->wait, rspi->spsr & wait_mask, HZ); + if (ret == 0 && !(rspi->spsr & wait_mask)) + return -ETIMEDOUT; + + return 0; +} + +static void rspi_assert_ssl(struct rspi_data *rspi) +{ + rspi_write8(rspi, rspi_read8(rspi, RSPI_SPCR) | SPCR_SPE, RSPI_SPCR); +} + +static void rspi_negate_ssl(struct rspi_data *rspi) +{ + rspi_write8(rspi, rspi_read8(rspi, RSPI_SPCR) & ~SPCR_SPE, RSPI_SPCR); +} + +static int rspi_set_config_register(struct rspi_data *rspi, int access_size) +{ + /* Sets output mode(CMOS) and MOSI signal(from previous transfer) */ + rspi_write8(rspi, 0x00, RSPI_SPPCR); + + /* Sets transfer bit rate */ + rspi_write8(rspi, rspi_calc_spbr(rspi), RSPI_SPBR); + + /* Sets number of frames to be used: 1 frame */ + rspi_write8(rspi, 0x00, RSPI_SPDCR); + + /* Sets RSPCK, SSL, next-access delay value */ + rspi_write8(rspi, 0x00, RSPI_SPCKD); + rspi_write8(rspi, 0x00, RSPI_SSLND); + rspi_write8(rspi, 0x00, RSPI_SPND); + + /* Sets parity, interrupt mask */ + rspi_write8(rspi, 0x00, RSPI_SPCR2); + + /* Sets SPCMD */ + rspi_write16(rspi, SPCMD_SPB_8_TO_16(access_size) | SPCMD_SSLKP, + RSPI_SPCMD0); + + /* Sets RSPI mode */ + rspi_write8(rspi, SPCR_MSTR, RSPI_SPCR); + + return 0; +} + +static int rspi_send_pio(struct rspi_data *rspi, struct spi_message *mesg, + struct spi_transfer *t) +{ + int remain = t->len; + u8 *data; + + data = (u8 *)t->tx_buf; + while (remain > 0) { + rspi_write8(rspi, rspi_read8(rspi, RSPI_SPCR) | SPCR_TXMD, + RSPI_SPCR); + + if (rspi_wait_for_interrupt(rspi, SPSR_SPTEF, SPCR_SPTIE) < 0) { + dev_err(&rspi->master->dev, + "%s: tx empty timeout\n", __func__); + return -ETIMEDOUT; + } + + rspi_write16(rspi, *data, RSPI_SPDR); + data++; + remain--; + } + + /* Waiting for the last transmition */ + rspi_wait_for_interrupt(rspi, SPSR_SPTEF, SPCR_SPTIE); + + return 0; +} + +static int rspi_receive_pio(struct rspi_data *rspi, struct spi_message *mesg, + struct spi_transfer *t) +{ + int remain = t->len; + u8 *data; + unsigned char spsr; + + spsr = rspi_read8(rspi, RSPI_SPSR); + if (spsr & SPSR_SPRF) + rspi_read16(rspi, RSPI_SPDR); /* dummy read */ + if (spsr & SPSR_OVRF) + rspi_write8(rspi, rspi_read8(rspi, RSPI_SPSR) & ~SPSR_OVRF, + RSPI_SPCR); + + data = (u8 *)t->rx_buf; + while (remain > 0) { + rspi_write8(rspi, rspi_read8(rspi, RSPI_SPCR) & ~SPCR_TXMD, + RSPI_SPCR); + + if (rspi_wait_for_interrupt(rspi, SPSR_SPTEF, SPCR_SPTIE) < 0) { + dev_err(&rspi->master->dev, + "%s: tx empty timeout\n", __func__); + return -ETIMEDOUT; + } + /* dummy write for generate clock */ + rspi_write16(rspi, 0x00, RSPI_SPDR); + + if (rspi_wait_for_interrupt(rspi, SPSR_SPRF, SPCR_SPRIE) < 0) { + dev_err(&rspi->master->dev, + "%s: receive timeout\n", __func__); + return -ETIMEDOUT; + } + /* SPDR allows 16 or 32-bit access only */ + *data = (u8)rspi_read16(rspi, RSPI_SPDR); + + data++; + remain--; + } + + return 0; +} + +static void rspi_work(struct work_struct *work) +{ + struct rspi_data *rspi = container_of(work, struct rspi_data, ws); + struct spi_message *mesg; + struct spi_transfer *t; + unsigned long flags; + int ret; + + spin_lock_irqsave(&rspi->lock, flags); + while (!list_empty(&rspi->queue)) { + mesg = list_entry(rspi->queue.next, struct spi_message, queue); + list_del_init(&mesg->queue); + spin_unlock_irqrestore(&rspi->lock, flags); + + rspi_assert_ssl(rspi); + + list_for_each_entry(t, &mesg->transfers, transfer_list) { + if (t->tx_buf) { + ret = rspi_send_pio(rspi, mesg, t); + if (ret < 0) + goto error; + } + if (t->rx_buf) { + ret = rspi_receive_pio(rspi, mesg, t); + if (ret < 0) + goto error; + } + mesg->actual_length += t->len; + } + rspi_negate_ssl(rspi); + + mesg->status = 0; + mesg->complete(mesg->context); + + spin_lock_irqsave(&rspi->lock, flags); + } + + return; + +error: + mesg->status = ret; + mesg->complete(mesg->context); +} + +static int rspi_setup(struct spi_device *spi) +{ + struct rspi_data *rspi = spi_master_get_devdata(spi->master); + + if (!spi->bits_per_word) + spi->bits_per_word = 8; + rspi->max_speed_hz = spi->max_speed_hz; + + rspi_set_config_register(rspi, 8); + + return 0; +} + +static int rspi_transfer(struct spi_device *spi, struct spi_message *mesg) +{ + struct rspi_data *rspi = spi_master_get_devdata(spi->master); + unsigned long flags; + + mesg->actual_length = 0; + mesg->status = -EINPROGRESS; + + spin_lock_irqsave(&rspi->lock, flags); + list_add_tail(&mesg->queue, &rspi->queue); + schedule_work(&rspi->ws); + spin_unlock_irqrestore(&rspi->lock, flags); + + return 0; +} + +static void rspi_cleanup(struct spi_device *spi) +{ +} + +static irqreturn_t rspi_irq(int irq, void *_sr) +{ + struct rspi_data *rspi = (struct rspi_data *)_sr; + unsigned long spsr; + irqreturn_t ret = IRQ_NONE; + unsigned char disable_irq = 0; + + rspi->spsr = spsr = rspi_read8(rspi, RSPI_SPSR); + if (spsr & SPSR_SPRF) + disable_irq |= SPCR_SPRIE; + if (spsr & SPSR_SPTEF) + disable_irq |= SPCR_SPTIE; + + if (disable_irq) { + ret = IRQ_HANDLED; + rspi_disable_irq(rspi, disable_irq); + wake_up(&rspi->wait); + } + + return ret; +} + +static int __devexit rspi_remove(struct platform_device *pdev) +{ + struct rspi_data *rspi = dev_get_drvdata(&pdev->dev); + + spi_unregister_master(rspi->master); + free_irq(platform_get_irq(pdev, 0), rspi); + clk_put(rspi->clk); + iounmap(rspi->addr); + spi_master_put(rspi->master); + + return 0; +} + +static int __devinit rspi_probe(struct platform_device *pdev) +{ + struct resource *res; + struct spi_master *master; + struct rspi_data *rspi; + int ret, irq; + char clk_name[16]; + + /* get base addr */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (unlikely(res == NULL)) { + dev_err(&pdev->dev, "invalid resource\n"); + return -EINVAL; + } + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(&pdev->dev, "platform_get_irq error\n"); + return -ENODEV; + } + + master = spi_alloc_master(&pdev->dev, sizeof(struct rspi_data)); + if (master == NULL) { + dev_err(&pdev->dev, "spi_alloc_master error.\n"); + return -ENOMEM; + } + + rspi = spi_master_get_devdata(master); + dev_set_drvdata(&pdev->dev, rspi); + + rspi->master = master; + rspi->addr = ioremap(res->start, resource_size(res)); + if (rspi->addr == NULL) { + dev_err(&pdev->dev, "ioremap error.\n"); + ret = -ENOMEM; + goto error1; + } + + snprintf(clk_name, sizeof(clk_name), "rspi%d", pdev->id); + rspi->clk = clk_get(&pdev->dev, clk_name); + if (IS_ERR(rspi->clk)) { + dev_err(&pdev->dev, "cannot get clock\n"); + ret = PTR_ERR(rspi->clk); + goto error2; + } + clk_enable(rspi->clk); + + INIT_LIST_HEAD(&rspi->queue); + spin_lock_init(&rspi->lock); + INIT_WORK(&rspi->ws, rspi_work); + init_waitqueue_head(&rspi->wait); + + master->num_chipselect = 2; + master->bus_num = pdev->id; + master->setup = rspi_setup; + master->transfer = rspi_transfer; + master->cleanup = rspi_cleanup; + + ret = request_irq(irq, rspi_irq, 0, dev_name(&pdev->dev), rspi); + if (ret < 0) { + dev_err(&pdev->dev, "request_irq error\n"); + goto error3; + } + + ret = spi_register_master(master); + if (ret < 0) { + dev_err(&pdev->dev, "spi_register_master error.\n"); + goto error4; + } + + dev_info(&pdev->dev, "probed\n"); + + return 0; + +error4: + free_irq(irq, rspi); +error3: + clk_put(rspi->clk); +error2: + iounmap(rspi->addr); +error1: + spi_master_put(master); + + return ret; +} + +static struct platform_driver rspi_driver = { + .probe = rspi_probe, + .remove = __devexit_p(rspi_remove), + .driver = { + .name = "rspi", + .owner = THIS_MODULE, + }, +}; +module_platform_driver(rspi_driver); + +MODULE_DESCRIPTION("Renesas RSPI bus driver"); +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Yoshihiro Shimoda"); +MODULE_ALIAS("platform:rspi"); diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c index dcf7e1006426..972a94c58be3 100644 --- a/drivers/spi/spi-s3c64xx.c +++ b/drivers/spi/spi-s3c64xx.c @@ -20,10 +20,12 @@ #include <linux/init.h> #include <linux/module.h> #include <linux/workqueue.h> +#include <linux/interrupt.h> #include <linux/delay.h> #include <linux/clk.h> #include <linux/dma-mapping.h> #include <linux/platform_device.h> +#include <linux/pm_runtime.h> #include <linux/spi/spi.h> #include <mach/dma.h> @@ -126,8 +128,6 @@ #define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t) -#define SUSPND (1<<0) -#define SPIBUSY (1<<1) #define RXBUSY (1<<2) #define TXBUSY (1<<3) @@ -142,10 +142,8 @@ struct s3c64xx_spi_dma_data { * @clk: Pointer to the spi clock. * @src_clk: Pointer to the clock used to generate SPI signals. * @master: Pointer to the SPI Protocol master. - * @workqueue: Work queue for the SPI xfer requests. * @cntrlr_info: Platform specific data for the controller this driver manages. * @tgl_spi: Pointer to the last CS left untoggled by the cs_change hint. - * @work: Work * @queue: To log SPI xfer requests. * @lock: Controller specific lock. * @state: Set of FLAGS to indicate status. @@ -153,6 +151,7 @@ struct s3c64xx_spi_dma_data { * @tx_dmach: Controller's DMA channel for Tx. * @sfr_start: BUS address of SPI controller regs. * @regs: Pointer to ioremap'ed controller registers. + * @irq: interrupt * @xfer_completion: To indicate completion of xfer task. * @cur_mode: Stores the active configuration of the controller. * @cur_bpw: Stores the active bits per word settings. @@ -164,10 +163,8 @@ struct s3c64xx_spi_driver_data { struct clk *src_clk; struct platform_device *pdev; struct spi_master *master; - struct workqueue_struct *workqueue; struct s3c64xx_spi_info *cntrlr_info; struct spi_device *tgl_spi; - struct work_struct work; struct list_head queue; spinlock_t lock; unsigned long sfr_start; @@ -239,7 +236,7 @@ static void s3c64xx_spi_dmacb(void *data) struct s3c64xx_spi_dma_data *dma = data; unsigned long flags; - if (dma->direction == DMA_FROM_DEVICE) + if (dma->direction == DMA_DEV_TO_MEM) sdd = container_of(data, struct s3c64xx_spi_driver_data, rx_dma); else @@ -248,7 +245,7 @@ static void s3c64xx_spi_dmacb(void *data) spin_lock_irqsave(&sdd->lock, flags); - if (dma->direction == DMA_FROM_DEVICE) { + if (dma->direction == DMA_DEV_TO_MEM) { sdd->state &= ~RXBUSY; if (!(sdd->state & TXBUSY)) complete(&sdd->xfer_completion); @@ -267,7 +264,7 @@ static void prepare_dma(struct s3c64xx_spi_dma_data *dma, struct s3c64xx_spi_driver_data *sdd; struct samsung_dma_prep_info info; - if (dma->direction == DMA_FROM_DEVICE) + if (dma->direction == DMA_DEV_TO_MEM) sdd = container_of((void *)dma, struct s3c64xx_spi_driver_data, rx_dma); else @@ -634,9 +631,10 @@ static void s3c64xx_spi_unmap_mssg(struct s3c64xx_spi_driver_data *sdd, } } -static void handle_msg(struct s3c64xx_spi_driver_data *sdd, - struct spi_message *msg) +static int s3c64xx_spi_transfer_one_message(struct spi_master *master, + struct spi_message *msg) { + struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(master); struct s3c64xx_spi_info *sci = sdd->cntrlr_info; struct spi_device *spi = msg->spi; struct s3c64xx_spi_csinfo *cs = spi->controller_data; @@ -766,73 +764,33 @@ out: msg->status = status; - if (msg->complete) - msg->complete(msg->context); + spi_finalize_current_message(master); + + return 0; } -static void s3c64xx_spi_work(struct work_struct *work) +static int s3c64xx_spi_prepare_transfer(struct spi_master *spi) { - struct s3c64xx_spi_driver_data *sdd = container_of(work, - struct s3c64xx_spi_driver_data, work); - unsigned long flags; + struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(spi); /* Acquire DMA channels */ while (!acquire_dma(sdd)) msleep(10); - spin_lock_irqsave(&sdd->lock, flags); - - while (!list_empty(&sdd->queue) - && !(sdd->state & SUSPND)) { - - struct spi_message *msg; - - msg = container_of(sdd->queue.next, struct spi_message, queue); - - list_del_init(&msg->queue); - - /* Set Xfer busy flag */ - sdd->state |= SPIBUSY; - - spin_unlock_irqrestore(&sdd->lock, flags); - - handle_msg(sdd, msg); + pm_runtime_get_sync(&sdd->pdev->dev); - spin_lock_irqsave(&sdd->lock, flags); - - sdd->state &= ~SPIBUSY; - } + return 0; +} - spin_unlock_irqrestore(&sdd->lock, flags); +static int s3c64xx_spi_unprepare_transfer(struct spi_master *spi) +{ + struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(spi); /* Free DMA channels */ sdd->ops->release(sdd->rx_dma.ch, &s3c64xx_spi_dma_client); sdd->ops->release(sdd->tx_dma.ch, &s3c64xx_spi_dma_client); -} -static int s3c64xx_spi_transfer(struct spi_device *spi, - struct spi_message *msg) -{ - struct s3c64xx_spi_driver_data *sdd; - unsigned long flags; - - sdd = spi_master_get_devdata(spi->master); - - spin_lock_irqsave(&sdd->lock, flags); - - if (sdd->state & SUSPND) { - spin_unlock_irqrestore(&sdd->lock, flags); - return -ESHUTDOWN; - } - - msg->status = -EINPROGRESS; - msg->actual_length = 0; - - list_add_tail(&msg->queue, &sdd->queue); - - queue_work(sdd->workqueue, &sdd->work); - - spin_unlock_irqrestore(&sdd->lock, flags); + pm_runtime_put(&sdd->pdev->dev); return 0; } @@ -872,13 +830,6 @@ static int s3c64xx_spi_setup(struct spi_device *spi) } } - if (sdd->state & SUSPND) { - spin_unlock_irqrestore(&sdd->lock, flags); - dev_err(&spi->dev, - "setup: SPI-%d not active!\n", spi->master->bus_num); - return -ESHUTDOWN; - } - spin_unlock_irqrestore(&sdd->lock, flags); if (spi->bits_per_word != 8 @@ -890,6 +841,8 @@ static int s3c64xx_spi_setup(struct spi_device *spi) goto setup_exit; } + pm_runtime_get_sync(&sdd->pdev->dev); + /* Check if we can provide the requested rate */ if (!sci->clk_from_cmu) { u32 psr, speed; @@ -922,6 +875,8 @@ static int s3c64xx_spi_setup(struct spi_device *spi) err = -EINVAL; } + pm_runtime_put(&sdd->pdev->dev); + setup_exit: /* setup() returns with device de-selected */ @@ -930,6 +885,33 @@ setup_exit: return err; } +static irqreturn_t s3c64xx_spi_irq(int irq, void *data) +{ + struct s3c64xx_spi_driver_data *sdd = data; + struct spi_master *spi = sdd->master; + unsigned int val; + + val = readl(sdd->regs + S3C64XX_SPI_PENDING_CLR); + + val &= S3C64XX_SPI_PND_RX_OVERRUN_CLR | + S3C64XX_SPI_PND_RX_UNDERRUN_CLR | + S3C64XX_SPI_PND_TX_OVERRUN_CLR | + S3C64XX_SPI_PND_TX_UNDERRUN_CLR; + + writel(val, sdd->regs + S3C64XX_SPI_PENDING_CLR); + + if (val & S3C64XX_SPI_PND_RX_OVERRUN_CLR) + dev_err(&spi->dev, "RX overrun\n"); + if (val & S3C64XX_SPI_PND_RX_UNDERRUN_CLR) + dev_err(&spi->dev, "RX underrun\n"); + if (val & S3C64XX_SPI_PND_TX_OVERRUN_CLR) + dev_err(&spi->dev, "TX overrun\n"); + if (val & S3C64XX_SPI_PND_TX_UNDERRUN_CLR) + dev_err(&spi->dev, "TX underrun\n"); + + return IRQ_HANDLED; +} + static void s3c64xx_spi_hwinit(struct s3c64xx_spi_driver_data *sdd, int channel) { struct s3c64xx_spi_info *sci = sdd->cntrlr_info; @@ -970,7 +952,7 @@ static int __init s3c64xx_spi_probe(struct platform_device *pdev) struct s3c64xx_spi_driver_data *sdd; struct s3c64xx_spi_info *sci; struct spi_master *master; - int ret; + int ret, irq; char clk_name[16]; if (pdev->id < 0) { @@ -1006,6 +988,12 @@ static int __init s3c64xx_spi_probe(struct platform_device *pdev) return -ENXIO; } + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_warn(&pdev->dev, "Failed to get IRQ: %d\n", irq); + return irq; + } + master = spi_alloc_master(&pdev->dev, sizeof(struct s3c64xx_spi_driver_data)); if (master == NULL) { @@ -1021,15 +1009,17 @@ static int __init s3c64xx_spi_probe(struct platform_device *pdev) sdd->pdev = pdev; sdd->sfr_start = mem_res->start; sdd->tx_dma.dmach = dmatx_res->start; - sdd->tx_dma.direction = DMA_TO_DEVICE; + sdd->tx_dma.direction = DMA_MEM_TO_DEV; sdd->rx_dma.dmach = dmarx_res->start; - sdd->rx_dma.direction = DMA_FROM_DEVICE; + sdd->rx_dma.direction = DMA_DEV_TO_MEM; sdd->cur_bpw = 8; master->bus_num = pdev->id; master->setup = s3c64xx_spi_setup; - master->transfer = s3c64xx_spi_transfer; + master->prepare_transfer_hardware = s3c64xx_spi_prepare_transfer; + master->transfer_one_message = s3c64xx_spi_transfer_one_message; + master->unprepare_transfer_hardware = s3c64xx_spi_unprepare_transfer; master->num_chipselect = sci->num_cs; master->dma_alignment = 8; /* the spi->mode bits understood by this driver: */ @@ -1084,22 +1074,24 @@ static int __init s3c64xx_spi_probe(struct platform_device *pdev) goto err6; } - sdd->workqueue = create_singlethread_workqueue( - dev_name(master->dev.parent)); - if (sdd->workqueue == NULL) { - dev_err(&pdev->dev, "Unable to create workqueue\n"); - ret = -ENOMEM; - goto err7; - } - /* Setup Deufult Mode */ s3c64xx_spi_hwinit(sdd, pdev->id); spin_lock_init(&sdd->lock); init_completion(&sdd->xfer_completion); - INIT_WORK(&sdd->work, s3c64xx_spi_work); INIT_LIST_HEAD(&sdd->queue); + ret = request_irq(irq, s3c64xx_spi_irq, 0, "spi-s3c64xx", sdd); + if (ret != 0) { + dev_err(&pdev->dev, "Failed to request IRQ %d: %d\n", + irq, ret); + goto err7; + } + + writel(S3C64XX_SPI_INT_RX_OVERRUN_EN | S3C64XX_SPI_INT_RX_UNDERRUN_EN | + S3C64XX_SPI_INT_TX_OVERRUN_EN | S3C64XX_SPI_INT_TX_UNDERRUN_EN, + sdd->regs + S3C64XX_SPI_INT_EN); + if (spi_register_master(master)) { dev_err(&pdev->dev, "cannot register SPI master\n"); ret = -EBUSY; @@ -1113,10 +1105,12 @@ static int __init s3c64xx_spi_probe(struct platform_device *pdev) mem_res->end, mem_res->start, sdd->rx_dma.dmach, sdd->tx_dma.dmach); + pm_runtime_enable(&pdev->dev); + return 0; err8: - destroy_workqueue(sdd->workqueue); + free_irq(irq, sdd); err7: clk_disable(sdd->src_clk); err6: @@ -1142,18 +1136,14 @@ static int s3c64xx_spi_remove(struct platform_device *pdev) struct spi_master *master = spi_master_get(platform_get_drvdata(pdev)); struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(master); struct resource *mem_res; - unsigned long flags; - - spin_lock_irqsave(&sdd->lock, flags); - sdd->state |= SUSPND; - spin_unlock_irqrestore(&sdd->lock, flags); - while (sdd->state & SPIBUSY) - msleep(10); + pm_runtime_disable(&pdev->dev); spi_unregister_master(master); - destroy_workqueue(sdd->workqueue); + writel(0, sdd->regs + S3C64XX_SPI_INT_EN); + + free_irq(platform_get_irq(pdev, 0), sdd); clk_disable(sdd->src_clk); clk_put(sdd->src_clk); @@ -1174,18 +1164,12 @@ static int s3c64xx_spi_remove(struct platform_device *pdev) } #ifdef CONFIG_PM -static int s3c64xx_spi_suspend(struct platform_device *pdev, pm_message_t state) +static int s3c64xx_spi_suspend(struct device *dev) { - struct spi_master *master = spi_master_get(platform_get_drvdata(pdev)); + struct spi_master *master = spi_master_get(dev_get_drvdata(dev)); struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(master); - unsigned long flags; - - spin_lock_irqsave(&sdd->lock, flags); - sdd->state |= SUSPND; - spin_unlock_irqrestore(&sdd->lock, flags); - while (sdd->state & SPIBUSY) - msleep(10); + spi_master_suspend(master); /* Disable the clock */ clk_disable(sdd->src_clk); @@ -1196,12 +1180,12 @@ static int s3c64xx_spi_suspend(struct platform_device *pdev, pm_message_t state) return 0; } -static int s3c64xx_spi_resume(struct platform_device *pdev) +static int s3c64xx_spi_resume(struct device *dev) { - struct spi_master *master = spi_master_get(platform_get_drvdata(pdev)); + struct platform_device *pdev = to_platform_device(dev); + struct spi_master *master = spi_master_get(dev_get_drvdata(dev)); struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(master); struct s3c64xx_spi_info *sci = sdd->cntrlr_info; - unsigned long flags; sci->cfg_gpio(pdev); @@ -1211,25 +1195,49 @@ static int s3c64xx_spi_resume(struct platform_device *pdev) s3c64xx_spi_hwinit(sdd, pdev->id); - spin_lock_irqsave(&sdd->lock, flags); - sdd->state &= ~SUSPND; - spin_unlock_irqrestore(&sdd->lock, flags); + spi_master_resume(master); return 0; } -#else -#define s3c64xx_spi_suspend NULL -#define s3c64xx_spi_resume NULL #endif /* CONFIG_PM */ +#ifdef CONFIG_PM_RUNTIME +static int s3c64xx_spi_runtime_suspend(struct device *dev) +{ + struct spi_master *master = spi_master_get(dev_get_drvdata(dev)); + struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(master); + + clk_disable(sdd->clk); + clk_disable(sdd->src_clk); + + return 0; +} + +static int s3c64xx_spi_runtime_resume(struct device *dev) +{ + struct spi_master *master = spi_master_get(dev_get_drvdata(dev)); + struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(master); + + clk_enable(sdd->src_clk); + clk_enable(sdd->clk); + + return 0; +} +#endif /* CONFIG_PM_RUNTIME */ + +static const struct dev_pm_ops s3c64xx_spi_pm = { + SET_SYSTEM_SLEEP_PM_OPS(s3c64xx_spi_suspend, s3c64xx_spi_resume) + SET_RUNTIME_PM_OPS(s3c64xx_spi_runtime_suspend, + s3c64xx_spi_runtime_resume, NULL) +}; + static struct platform_driver s3c64xx_spi_driver = { .driver = { .name = "s3c64xx-spi", .owner = THIS_MODULE, + .pm = &s3c64xx_spi_pm, }, .remove = s3c64xx_spi_remove, - .suspend = s3c64xx_spi_suspend, - .resume = s3c64xx_spi_resume, }; MODULE_ALIAS("platform:s3c64xx-spi"); diff --git a/drivers/spi/spi-sh-hspi.c b/drivers/spi/spi-sh-hspi.c new file mode 100644 index 000000000000..934138c7b3d3 --- /dev/null +++ b/drivers/spi/spi-sh-hspi.c @@ -0,0 +1,331 @@ +/* + * SuperH HSPI bus driver + * + * Copyright (C) 2011 Kuninori Morimoto + * + * Based on spi-sh.c: + * Based on pxa2xx_spi.c: + * Copyright (C) 2011 Renesas Solutions Corp. + * Copyright (C) 2005 Stephen Street / StreetFire Sound Labs + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + */ + +#include <linux/clk.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/timer.h> +#include <linux/delay.h> +#include <linux/list.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/pm_runtime.h> +#include <linux/io.h> +#include <linux/spi/spi.h> +#include <linux/spi/sh_hspi.h> + +#define SPCR 0x00 +#define SPSR 0x04 +#define SPSCR 0x08 +#define SPTBR 0x0C +#define SPRBR 0x10 +#define SPCR2 0x14 + +/* SPSR */ +#define RXFL (1 << 2) + +#define hspi2info(h) (h->dev->platform_data) + +struct hspi_priv { + void __iomem *addr; + struct spi_master *master; + struct device *dev; + struct clk *clk; +}; + +/* + * basic function + */ +static void hspi_write(struct hspi_priv *hspi, int reg, u32 val) +{ + iowrite32(val, hspi->addr + reg); +} + +static u32 hspi_read(struct hspi_priv *hspi, int reg) +{ + return ioread32(hspi->addr + reg); +} + +/* + * transfer function + */ +static int hspi_status_check_timeout(struct hspi_priv *hspi, u32 mask, u32 val) +{ + int t = 256; + + while (t--) { + if ((mask & hspi_read(hspi, SPSR)) == val) + return 0; + + msleep(20); + } + + dev_err(hspi->dev, "timeout\n"); + return -ETIMEDOUT; +} + +/* + * spi master function + */ +static int hspi_prepare_transfer(struct spi_master *master) +{ + struct hspi_priv *hspi = spi_master_get_devdata(master); + + pm_runtime_get_sync(hspi->dev); + return 0; +} + +static int hspi_unprepare_transfer(struct spi_master *master) +{ + struct hspi_priv *hspi = spi_master_get_devdata(master); + + pm_runtime_put_sync(hspi->dev); + return 0; +} + +static void hspi_hw_setup(struct hspi_priv *hspi, + struct spi_message *msg, + struct spi_transfer *t) +{ + struct spi_device *spi = msg->spi; + struct device *dev = hspi->dev; + u32 target_rate; + u32 spcr, idiv_clk; + u32 rate, best_rate, min, tmp; + + target_rate = t ? t->speed_hz : 0; + if (!target_rate) + target_rate = spi->max_speed_hz; + + /* + * find best IDIV/CLKCx settings + */ + min = ~0; + best_rate = 0; + spcr = 0; + for (idiv_clk = 0x00; idiv_clk <= 0x3F; idiv_clk++) { + rate = clk_get_rate(hspi->clk); + + /* IDIV calculation */ + if (idiv_clk & (1 << 5)) + rate /= 128; + else + rate /= 16; + + /* CLKCx calculation */ + rate /= (((idiv_clk & 0x1F) + 1) * 2) ; + + /* save best settings */ + tmp = abs(target_rate - rate); + if (tmp < min) { + min = tmp; + spcr = idiv_clk; + best_rate = rate; + } + } + + if (spi->mode & SPI_CPHA) + spcr |= 1 << 7; + if (spi->mode & SPI_CPOL) + spcr |= 1 << 6; + + dev_dbg(dev, "speed %d/%d\n", target_rate, best_rate); + + hspi_write(hspi, SPCR, spcr); + hspi_write(hspi, SPSR, 0x0); + hspi_write(hspi, SPSCR, 0x1); /* master mode */ +} + +static int hspi_transfer_one_message(struct spi_master *master, + struct spi_message *msg) +{ + struct hspi_priv *hspi = spi_master_get_devdata(master); + struct spi_transfer *t; + u32 tx; + u32 rx; + int ret, i; + + dev_dbg(hspi->dev, "%s\n", __func__); + + ret = 0; + list_for_each_entry(t, &msg->transfers, transfer_list) { + hspi_hw_setup(hspi, msg, t); + + for (i = 0; i < t->len; i++) { + + /* wait remains */ + ret = hspi_status_check_timeout(hspi, 0x1, 0); + if (ret < 0) + break; + + tx = 0; + if (t->tx_buf) + tx = (u32)((u8 *)t->tx_buf)[i]; + + hspi_write(hspi, SPTBR, tx); + + /* wait recive */ + ret = hspi_status_check_timeout(hspi, 0x4, 0x4); + if (ret < 0) + break; + + rx = hspi_read(hspi, SPRBR); + if (t->rx_buf) + ((u8 *)t->rx_buf)[i] = (u8)rx; + + } + + msg->actual_length += t->len; + } + + msg->status = ret; + spi_finalize_current_message(master); + + return ret; +} + +static int hspi_setup(struct spi_device *spi) +{ + struct hspi_priv *hspi = spi_master_get_devdata(spi->master); + struct device *dev = hspi->dev; + + if (8 != spi->bits_per_word) { + dev_err(dev, "bits_per_word should be 8\n"); + return -EIO; + } + + dev_dbg(dev, "%s setup\n", spi->modalias); + + return 0; +} + +static void hspi_cleanup(struct spi_device *spi) +{ + struct hspi_priv *hspi = spi_master_get_devdata(spi->master); + struct device *dev = hspi->dev; + + dev_dbg(dev, "%s cleanup\n", spi->modalias); +} + +static int __devinit hspi_probe(struct platform_device *pdev) +{ + struct resource *res; + struct spi_master *master; + struct hspi_priv *hspi; + struct clk *clk; + int ret; + + /* get base addr */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "invalid resource\n"); + return -EINVAL; + } + + master = spi_alloc_master(&pdev->dev, sizeof(*hspi)); + if (!master) { + dev_err(&pdev->dev, "spi_alloc_master error.\n"); + return -ENOMEM; + } + + clk = clk_get(NULL, "shyway_clk"); + if (!clk) { + dev_err(&pdev->dev, "shyway_clk is required\n"); + ret = -EINVAL; + goto error0; + } + + hspi = spi_master_get_devdata(master); + dev_set_drvdata(&pdev->dev, hspi); + + /* init hspi */ + hspi->master = master; + hspi->dev = &pdev->dev; + hspi->clk = clk; + hspi->addr = devm_ioremap(hspi->dev, + res->start, resource_size(res)); + if (!hspi->addr) { + dev_err(&pdev->dev, "ioremap error.\n"); + ret = -ENOMEM; + goto error1; + } + + master->num_chipselect = 1; + master->bus_num = pdev->id; + master->setup = hspi_setup; + master->cleanup = hspi_cleanup; + master->mode_bits = SPI_CPOL | SPI_CPHA; + master->prepare_transfer_hardware = hspi_prepare_transfer; + master->transfer_one_message = hspi_transfer_one_message; + master->unprepare_transfer_hardware = hspi_unprepare_transfer; + ret = spi_register_master(master); + if (ret < 0) { + dev_err(&pdev->dev, "spi_register_master error.\n"); + goto error2; + } + + pm_runtime_enable(&pdev->dev); + + dev_info(&pdev->dev, "probed\n"); + + return 0; + + error2: + devm_iounmap(hspi->dev, hspi->addr); + error1: + clk_put(clk); + error0: + spi_master_put(master); + + return ret; +} + +static int __devexit hspi_remove(struct platform_device *pdev) +{ + struct hspi_priv *hspi = dev_get_drvdata(&pdev->dev); + + pm_runtime_disable(&pdev->dev); + + clk_put(hspi->clk); + spi_unregister_master(hspi->master); + devm_iounmap(hspi->dev, hspi->addr); + + return 0; +} + +static struct platform_driver hspi_driver = { + .probe = hspi_probe, + .remove = __devexit_p(hspi_remove), + .driver = { + .name = "sh-hspi", + .owner = THIS_MODULE, + }, +}; +module_platform_driver(hspi_driver); + +MODULE_DESCRIPTION("SuperH HSPI bus driver"); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>"); +MODULE_ALIAS("platform:sh_spi"); diff --git a/drivers/spi/spi-sh.c b/drivers/spi/spi-sh.c index 70c8af9f7ccc..79442c31bcd9 100644 --- a/drivers/spi/spi-sh.c +++ b/drivers/spi/spi-sh.c @@ -92,17 +92,26 @@ struct spi_sh_data { unsigned long cr1; wait_queue_head_t wait; spinlock_t lock; + int width; }; static void spi_sh_write(struct spi_sh_data *ss, unsigned long data, unsigned long offset) { - writel(data, ss->addr + offset); + if (ss->width == 8) + iowrite8(data, ss->addr + (offset >> 2)); + else if (ss->width == 32) + iowrite32(data, ss->addr + offset); } static unsigned long spi_sh_read(struct spi_sh_data *ss, unsigned long offset) { - return readl(ss->addr + offset); + if (ss->width == 8) + return ioread8(ss->addr + (offset >> 2)); + else if (ss->width == 32) + return ioread32(ss->addr + offset); + else + return 0; } static void spi_sh_set_bit(struct spi_sh_data *ss, unsigned long val, @@ -464,6 +473,18 @@ static int __devinit spi_sh_probe(struct platform_device *pdev) ss = spi_master_get_devdata(master); dev_set_drvdata(&pdev->dev, ss); + switch (res->flags & IORESOURCE_MEM_TYPE_MASK) { + case IORESOURCE_MEM_8BIT: + ss->width = 8; + break; + case IORESOURCE_MEM_32BIT: + ss->width = 32; + break; + default: + dev_err(&pdev->dev, "No support width\n"); + ret = -ENODEV; + goto error1; + } ss->irq = irq; ss->master = master; ss->addr = ioremap(res->start, resource_size(res)); diff --git a/drivers/spi/spi-sirf.c b/drivers/spi/spi-sirf.c new file mode 100644 index 000000000000..52fe495bb32a --- /dev/null +++ b/drivers/spi/spi-sirf.c @@ -0,0 +1,687 @@ +/* + * SPI bus driver for CSR SiRFprimaII + * + * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. + * + * Licensed under GPLv2 or later. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/clk.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/bitops.h> +#include <linux/err.h> +#include <linux/platform_device.h> +#include <linux/of_gpio.h> +#include <linux/spi/spi.h> +#include <linux/spi/spi_bitbang.h> +#include <linux/pinctrl/pinmux.h> + +#define DRIVER_NAME "sirfsoc_spi" + +#define SIRFSOC_SPI_CTRL 0x0000 +#define SIRFSOC_SPI_CMD 0x0004 +#define SIRFSOC_SPI_TX_RX_EN 0x0008 +#define SIRFSOC_SPI_INT_EN 0x000C +#define SIRFSOC_SPI_INT_STATUS 0x0010 +#define SIRFSOC_SPI_TX_DMA_IO_CTRL 0x0100 +#define SIRFSOC_SPI_TX_DMA_IO_LEN 0x0104 +#define SIRFSOC_SPI_TXFIFO_CTRL 0x0108 +#define SIRFSOC_SPI_TXFIFO_LEVEL_CHK 0x010C +#define SIRFSOC_SPI_TXFIFO_OP 0x0110 +#define SIRFSOC_SPI_TXFIFO_STATUS 0x0114 +#define SIRFSOC_SPI_TXFIFO_DATA 0x0118 +#define SIRFSOC_SPI_RX_DMA_IO_CTRL 0x0120 +#define SIRFSOC_SPI_RX_DMA_IO_LEN 0x0124 +#define SIRFSOC_SPI_RXFIFO_CTRL 0x0128 +#define SIRFSOC_SPI_RXFIFO_LEVEL_CHK 0x012C +#define SIRFSOC_SPI_RXFIFO_OP 0x0130 +#define SIRFSOC_SPI_RXFIFO_STATUS 0x0134 +#define SIRFSOC_SPI_RXFIFO_DATA 0x0138 +#define SIRFSOC_SPI_DUMMY_DELAY_CTL 0x0144 + +/* SPI CTRL register defines */ +#define SIRFSOC_SPI_SLV_MODE BIT(16) +#define SIRFSOC_SPI_CMD_MODE BIT(17) +#define SIRFSOC_SPI_CS_IO_OUT BIT(18) +#define SIRFSOC_SPI_CS_IO_MODE BIT(19) +#define SIRFSOC_SPI_CLK_IDLE_STAT BIT(20) +#define SIRFSOC_SPI_CS_IDLE_STAT BIT(21) +#define SIRFSOC_SPI_TRAN_MSB BIT(22) +#define SIRFSOC_SPI_DRV_POS_EDGE BIT(23) +#define SIRFSOC_SPI_CS_HOLD_TIME BIT(24) +#define SIRFSOC_SPI_CLK_SAMPLE_MODE BIT(25) +#define SIRFSOC_SPI_TRAN_DAT_FORMAT_8 (0 << 26) +#define SIRFSOC_SPI_TRAN_DAT_FORMAT_12 (1 << 26) +#define SIRFSOC_SPI_TRAN_DAT_FORMAT_16 (2 << 26) +#define SIRFSOC_SPI_TRAN_DAT_FORMAT_32 (3 << 26) +#define SIRFSOC_SPI_CMD_BYTE_NUM(x) ((x & 3) << 28) +#define SIRFSOC_SPI_ENA_AUTO_CLR BIT(30) +#define SIRFSOC_SPI_MUL_DAT_MODE BIT(31) + +/* Interrupt Enable */ +#define SIRFSOC_SPI_RX_DONE_INT_EN BIT(0) +#define SIRFSOC_SPI_TX_DONE_INT_EN BIT(1) +#define SIRFSOC_SPI_RX_OFLOW_INT_EN BIT(2) +#define SIRFSOC_SPI_TX_UFLOW_INT_EN BIT(3) +#define SIRFSOC_SPI_RX_IO_DMA_INT_EN BIT(4) +#define SIRFSOC_SPI_TX_IO_DMA_INT_EN BIT(5) +#define SIRFSOC_SPI_RXFIFO_FULL_INT_EN BIT(6) +#define SIRFSOC_SPI_TXFIFO_EMPTY_INT_EN BIT(7) +#define SIRFSOC_SPI_RXFIFO_THD_INT_EN BIT(8) +#define SIRFSOC_SPI_TXFIFO_THD_INT_EN BIT(9) +#define SIRFSOC_SPI_FRM_END_INT_EN BIT(10) + +#define SIRFSOC_SPI_INT_MASK_ALL 0x1FFF + +/* Interrupt status */ +#define SIRFSOC_SPI_RX_DONE BIT(0) +#define SIRFSOC_SPI_TX_DONE BIT(1) +#define SIRFSOC_SPI_RX_OFLOW BIT(2) +#define SIRFSOC_SPI_TX_UFLOW BIT(3) +#define SIRFSOC_SPI_RX_FIFO_FULL BIT(6) +#define SIRFSOC_SPI_TXFIFO_EMPTY BIT(7) +#define SIRFSOC_SPI_RXFIFO_THD_REACH BIT(8) +#define SIRFSOC_SPI_TXFIFO_THD_REACH BIT(9) +#define SIRFSOC_SPI_FRM_END BIT(10) + +/* TX RX enable */ +#define SIRFSOC_SPI_RX_EN BIT(0) +#define SIRFSOC_SPI_TX_EN BIT(1) +#define SIRFSOC_SPI_CMD_TX_EN BIT(2) + +#define SIRFSOC_SPI_IO_MODE_SEL BIT(0) +#define SIRFSOC_SPI_RX_DMA_FLUSH BIT(2) + +/* FIFO OPs */ +#define SIRFSOC_SPI_FIFO_RESET BIT(0) +#define SIRFSOC_SPI_FIFO_START BIT(1) + +/* FIFO CTRL */ +#define SIRFSOC_SPI_FIFO_WIDTH_BYTE (0 << 0) +#define SIRFSOC_SPI_FIFO_WIDTH_WORD (1 << 0) +#define SIRFSOC_SPI_FIFO_WIDTH_DWORD (2 << 0) + +/* FIFO Status */ +#define SIRFSOC_SPI_FIFO_LEVEL_MASK 0xFF +#define SIRFSOC_SPI_FIFO_FULL BIT(8) +#define SIRFSOC_SPI_FIFO_EMPTY BIT(9) + +/* 256 bytes rx/tx FIFO */ +#define SIRFSOC_SPI_FIFO_SIZE 256 +#define SIRFSOC_SPI_DAT_FRM_LEN_MAX (64 * 1024) + +#define SIRFSOC_SPI_FIFO_SC(x) ((x) & 0x3F) +#define SIRFSOC_SPI_FIFO_LC(x) (((x) & 0x3F) << 10) +#define SIRFSOC_SPI_FIFO_HC(x) (((x) & 0x3F) << 20) +#define SIRFSOC_SPI_FIFO_THD(x) (((x) & 0xFF) << 2) + +struct sirfsoc_spi { + struct spi_bitbang bitbang; + struct completion done; + + void __iomem *base; + u32 ctrl_freq; /* SPI controller clock speed */ + struct clk *clk; + struct pinmux *pmx; + + /* rx & tx bufs from the spi_transfer */ + const void *tx; + void *rx; + + /* place received word into rx buffer */ + void (*rx_word) (struct sirfsoc_spi *); + /* get word from tx buffer for sending */ + void (*tx_word) (struct sirfsoc_spi *); + + /* number of words left to be tranmitted/received */ + unsigned int left_tx_cnt; + unsigned int left_rx_cnt; + + /* tasklet to push tx msg into FIFO */ + struct tasklet_struct tasklet_tx; + + int chipselect[0]; +}; + +static void spi_sirfsoc_rx_word_u8(struct sirfsoc_spi *sspi) +{ + u32 data; + u8 *rx = sspi->rx; + + data = readl(sspi->base + SIRFSOC_SPI_RXFIFO_DATA); + + if (rx) { + *rx++ = (u8) data; + sspi->rx = rx; + } + + sspi->left_rx_cnt--; +} + +static void spi_sirfsoc_tx_word_u8(struct sirfsoc_spi *sspi) +{ + u32 data = 0; + const u8 *tx = sspi->tx; + + if (tx) { + data = *tx++; + sspi->tx = tx; + } + + writel(data, sspi->base + SIRFSOC_SPI_TXFIFO_DATA); + sspi->left_tx_cnt--; +} + +static void spi_sirfsoc_rx_word_u16(struct sirfsoc_spi *sspi) +{ + u32 data; + u16 *rx = sspi->rx; + + data = readl(sspi->base + SIRFSOC_SPI_RXFIFO_DATA); + + if (rx) { + *rx++ = (u16) data; + sspi->rx = rx; + } + + sspi->left_rx_cnt--; +} + +static void spi_sirfsoc_tx_word_u16(struct sirfsoc_spi *sspi) +{ + u32 data = 0; + const u16 *tx = sspi->tx; + + if (tx) { + data = *tx++; + sspi->tx = tx; + } + + writel(data, sspi->base + SIRFSOC_SPI_TXFIFO_DATA); + sspi->left_tx_cnt--; +} + +static void spi_sirfsoc_rx_word_u32(struct sirfsoc_spi *sspi) +{ + u32 data; + u32 *rx = sspi->rx; + + data = readl(sspi->base + SIRFSOC_SPI_RXFIFO_DATA); + + if (rx) { + *rx++ = (u32) data; + sspi->rx = rx; + } + + sspi->left_rx_cnt--; + +} + +static void spi_sirfsoc_tx_word_u32(struct sirfsoc_spi *sspi) +{ + u32 data = 0; + const u32 *tx = sspi->tx; + + if (tx) { + data = *tx++; + sspi->tx = tx; + } + + writel(data, sspi->base + SIRFSOC_SPI_TXFIFO_DATA); + sspi->left_tx_cnt--; +} + +static void spi_sirfsoc_tasklet_tx(unsigned long arg) +{ + struct sirfsoc_spi *sspi = (struct sirfsoc_spi *)arg; + + /* Fill Tx FIFO while there are left words to be transmitted */ + while (!((readl(sspi->base + SIRFSOC_SPI_TXFIFO_STATUS) & + SIRFSOC_SPI_FIFO_FULL)) && + sspi->left_tx_cnt) + sspi->tx_word(sspi); +} + +static irqreturn_t spi_sirfsoc_irq(int irq, void *dev_id) +{ + struct sirfsoc_spi *sspi = dev_id; + u32 spi_stat = readl(sspi->base + SIRFSOC_SPI_INT_STATUS); + + writel(spi_stat, sspi->base + SIRFSOC_SPI_INT_STATUS); + + /* Error Conditions */ + if (spi_stat & SIRFSOC_SPI_RX_OFLOW || + spi_stat & SIRFSOC_SPI_TX_UFLOW) { + complete(&sspi->done); + writel(0x0, sspi->base + SIRFSOC_SPI_INT_EN); + } + + if (spi_stat & SIRFSOC_SPI_FRM_END) { + while (!((readl(sspi->base + SIRFSOC_SPI_RXFIFO_STATUS) + & SIRFSOC_SPI_FIFO_EMPTY)) && + sspi->left_rx_cnt) + sspi->rx_word(sspi); + + /* Received all words */ + if ((sspi->left_rx_cnt == 0) && (sspi->left_tx_cnt == 0)) { + complete(&sspi->done); + writel(0x0, sspi->base + SIRFSOC_SPI_INT_EN); + } + } + + if (spi_stat & SIRFSOC_SPI_RXFIFO_THD_REACH || + spi_stat & SIRFSOC_SPI_TXFIFO_THD_REACH || + spi_stat & SIRFSOC_SPI_RX_FIFO_FULL || + spi_stat & SIRFSOC_SPI_TXFIFO_EMPTY) + tasklet_schedule(&sspi->tasklet_tx); + + return IRQ_HANDLED; +} + +static int spi_sirfsoc_transfer(struct spi_device *spi, struct spi_transfer *t) +{ + struct sirfsoc_spi *sspi; + int timeout = t->len * 10; + sspi = spi_master_get_devdata(spi->master); + + sspi->tx = t->tx_buf; + sspi->rx = t->rx_buf; + sspi->left_tx_cnt = sspi->left_rx_cnt = t->len; + INIT_COMPLETION(sspi->done); + + writel(SIRFSOC_SPI_INT_MASK_ALL, sspi->base + SIRFSOC_SPI_INT_STATUS); + + if (t->len == 1) { + writel(readl(sspi->base + SIRFSOC_SPI_CTRL) | + SIRFSOC_SPI_ENA_AUTO_CLR, + sspi->base + SIRFSOC_SPI_CTRL); + writel(0, sspi->base + SIRFSOC_SPI_TX_DMA_IO_LEN); + writel(0, sspi->base + SIRFSOC_SPI_RX_DMA_IO_LEN); + } else if ((t->len > 1) && (t->len < SIRFSOC_SPI_DAT_FRM_LEN_MAX)) { + writel(readl(sspi->base + SIRFSOC_SPI_CTRL) | + SIRFSOC_SPI_MUL_DAT_MODE | + SIRFSOC_SPI_ENA_AUTO_CLR, + sspi->base + SIRFSOC_SPI_CTRL); + writel(t->len - 1, sspi->base + SIRFSOC_SPI_TX_DMA_IO_LEN); + writel(t->len - 1, sspi->base + SIRFSOC_SPI_RX_DMA_IO_LEN); + } else { + writel(readl(sspi->base + SIRFSOC_SPI_CTRL), + sspi->base + SIRFSOC_SPI_CTRL); + writel(0, sspi->base + SIRFSOC_SPI_TX_DMA_IO_LEN); + writel(0, sspi->base + SIRFSOC_SPI_RX_DMA_IO_LEN); + } + + writel(SIRFSOC_SPI_FIFO_RESET, sspi->base + SIRFSOC_SPI_RXFIFO_OP); + writel(SIRFSOC_SPI_FIFO_RESET, sspi->base + SIRFSOC_SPI_TXFIFO_OP); + writel(SIRFSOC_SPI_FIFO_START, sspi->base + SIRFSOC_SPI_RXFIFO_OP); + writel(SIRFSOC_SPI_FIFO_START, sspi->base + SIRFSOC_SPI_TXFIFO_OP); + + /* Send the first word to trigger the whole tx/rx process */ + sspi->tx_word(sspi); + + writel(SIRFSOC_SPI_RX_OFLOW_INT_EN | SIRFSOC_SPI_TX_UFLOW_INT_EN | + SIRFSOC_SPI_RXFIFO_THD_INT_EN | SIRFSOC_SPI_TXFIFO_THD_INT_EN | + SIRFSOC_SPI_FRM_END_INT_EN | SIRFSOC_SPI_RXFIFO_FULL_INT_EN | + SIRFSOC_SPI_TXFIFO_EMPTY_INT_EN, sspi->base + SIRFSOC_SPI_INT_EN); + writel(SIRFSOC_SPI_RX_EN | SIRFSOC_SPI_TX_EN, sspi->base + SIRFSOC_SPI_TX_RX_EN); + + if (wait_for_completion_timeout(&sspi->done, timeout) == 0) + dev_err(&spi->dev, "transfer timeout\n"); + + /* TX, RX FIFO stop */ + writel(0, sspi->base + SIRFSOC_SPI_RXFIFO_OP); + writel(0, sspi->base + SIRFSOC_SPI_TXFIFO_OP); + writel(0, sspi->base + SIRFSOC_SPI_TX_RX_EN); + writel(0, sspi->base + SIRFSOC_SPI_INT_EN); + + return t->len - sspi->left_rx_cnt; +} + +static void spi_sirfsoc_chipselect(struct spi_device *spi, int value) +{ + struct sirfsoc_spi *sspi = spi_master_get_devdata(spi->master); + + if (sspi->chipselect[spi->chip_select] == 0) { + u32 regval = readl(sspi->base + SIRFSOC_SPI_CTRL); + regval |= SIRFSOC_SPI_CS_IO_OUT; + switch (value) { + case BITBANG_CS_ACTIVE: + if (spi->mode & SPI_CS_HIGH) + regval |= SIRFSOC_SPI_CS_IO_OUT; + else + regval &= ~SIRFSOC_SPI_CS_IO_OUT; + break; + case BITBANG_CS_INACTIVE: + if (spi->mode & SPI_CS_HIGH) + regval &= ~SIRFSOC_SPI_CS_IO_OUT; + else + regval |= SIRFSOC_SPI_CS_IO_OUT; + break; + } + writel(regval, sspi->base + SIRFSOC_SPI_CTRL); + } else { + int gpio = sspi->chipselect[spi->chip_select]; + gpio_direction_output(gpio, spi->mode & SPI_CS_HIGH ? 0 : 1); + } +} + +static int +spi_sirfsoc_setup_transfer(struct spi_device *spi, struct spi_transfer *t) +{ + struct sirfsoc_spi *sspi; + u8 bits_per_word = 0; + int hz = 0; + u32 regval; + u32 txfifo_ctrl, rxfifo_ctrl; + u32 fifo_size = SIRFSOC_SPI_FIFO_SIZE / 4; + + sspi = spi_master_get_devdata(spi->master); + + bits_per_word = t && t->bits_per_word ? t->bits_per_word : + spi->bits_per_word; + hz = t && t->speed_hz ? t->speed_hz : spi->max_speed_hz; + + /* Enable IO mode for RX, TX */ + writel(SIRFSOC_SPI_IO_MODE_SEL, sspi->base + SIRFSOC_SPI_TX_DMA_IO_CTRL); + writel(SIRFSOC_SPI_IO_MODE_SEL, sspi->base + SIRFSOC_SPI_RX_DMA_IO_CTRL); + regval = (sspi->ctrl_freq / (2 * hz)) - 1; + + if (regval > 0xFFFF || regval < 0) { + dev_err(&spi->dev, "Speed %d not supported\n", hz); + return -EINVAL; + } + + switch (bits_per_word) { + case 8: + regval |= SIRFSOC_SPI_TRAN_DAT_FORMAT_8; + sspi->rx_word = spi_sirfsoc_rx_word_u8; + sspi->tx_word = spi_sirfsoc_tx_word_u8; + txfifo_ctrl = SIRFSOC_SPI_FIFO_THD(SIRFSOC_SPI_FIFO_SIZE / 2) | + SIRFSOC_SPI_FIFO_WIDTH_BYTE; + rxfifo_ctrl = SIRFSOC_SPI_FIFO_THD(SIRFSOC_SPI_FIFO_SIZE / 2) | + SIRFSOC_SPI_FIFO_WIDTH_BYTE; + break; + case 12: + case 16: + regval |= (bits_per_word == 12) ? SIRFSOC_SPI_TRAN_DAT_FORMAT_12 : + SIRFSOC_SPI_TRAN_DAT_FORMAT_16; + sspi->rx_word = spi_sirfsoc_rx_word_u16; + sspi->tx_word = spi_sirfsoc_tx_word_u16; + txfifo_ctrl = SIRFSOC_SPI_FIFO_THD(SIRFSOC_SPI_FIFO_SIZE / 2) | + SIRFSOC_SPI_FIFO_WIDTH_WORD; + rxfifo_ctrl = SIRFSOC_SPI_FIFO_THD(SIRFSOC_SPI_FIFO_SIZE / 2) | + SIRFSOC_SPI_FIFO_WIDTH_WORD; + break; + case 32: + regval |= SIRFSOC_SPI_TRAN_DAT_FORMAT_32; + sspi->rx_word = spi_sirfsoc_rx_word_u32; + sspi->tx_word = spi_sirfsoc_tx_word_u32; + txfifo_ctrl = SIRFSOC_SPI_FIFO_THD(SIRFSOC_SPI_FIFO_SIZE / 2) | + SIRFSOC_SPI_FIFO_WIDTH_DWORD; + rxfifo_ctrl = SIRFSOC_SPI_FIFO_THD(SIRFSOC_SPI_FIFO_SIZE / 2) | + SIRFSOC_SPI_FIFO_WIDTH_DWORD; + break; + default: + dev_err(&spi->dev, "Bits per word %d not supported\n", + bits_per_word); + return -EINVAL; + } + + if (!(spi->mode & SPI_CS_HIGH)) + regval |= SIRFSOC_SPI_CS_IDLE_STAT; + if (!(spi->mode & SPI_LSB_FIRST)) + regval |= SIRFSOC_SPI_TRAN_MSB; + if (spi->mode & SPI_CPOL) + regval |= SIRFSOC_SPI_CLK_IDLE_STAT; + + /* + * Data should be driven at least 1/2 cycle before the fetch edge to make + * sure that data gets stable at the fetch edge. + */ + if (((spi->mode & SPI_CPOL) && (spi->mode & SPI_CPHA)) || + (!(spi->mode & SPI_CPOL) && !(spi->mode & SPI_CPHA))) + regval &= ~SIRFSOC_SPI_DRV_POS_EDGE; + else + regval |= SIRFSOC_SPI_DRV_POS_EDGE; + + writel(SIRFSOC_SPI_FIFO_SC(fifo_size - 2) | + SIRFSOC_SPI_FIFO_LC(fifo_size / 2) | + SIRFSOC_SPI_FIFO_HC(2), + sspi->base + SIRFSOC_SPI_TXFIFO_LEVEL_CHK); + writel(SIRFSOC_SPI_FIFO_SC(2) | + SIRFSOC_SPI_FIFO_LC(fifo_size / 2) | + SIRFSOC_SPI_FIFO_HC(fifo_size - 2), + sspi->base + SIRFSOC_SPI_RXFIFO_LEVEL_CHK); + writel(txfifo_ctrl, sspi->base + SIRFSOC_SPI_TXFIFO_CTRL); + writel(rxfifo_ctrl, sspi->base + SIRFSOC_SPI_RXFIFO_CTRL); + + writel(regval, sspi->base + SIRFSOC_SPI_CTRL); + return 0; +} + +static int spi_sirfsoc_setup(struct spi_device *spi) +{ + struct sirfsoc_spi *sspi; + + if (!spi->max_speed_hz) + return -EINVAL; + + sspi = spi_master_get_devdata(spi->master); + + if (!spi->bits_per_word) + spi->bits_per_word = 8; + + return spi_sirfsoc_setup_transfer(spi, NULL); +} + +static int __devinit spi_sirfsoc_probe(struct platform_device *pdev) +{ + struct sirfsoc_spi *sspi; + struct spi_master *master; + struct resource *mem_res; + int num_cs, cs_gpio, irq; + int i; + int ret; + + ret = of_property_read_u32(pdev->dev.of_node, + "sirf,spi-num-chipselects", &num_cs); + if (ret < 0) { + dev_err(&pdev->dev, "Unable to get chip select number\n"); + goto err_cs; + } + + master = spi_alloc_master(&pdev->dev, sizeof(*sspi) + sizeof(int) * num_cs); + if (!master) { + dev_err(&pdev->dev, "Unable to allocate SPI master\n"); + return -ENOMEM; + } + platform_set_drvdata(pdev, master); + sspi = spi_master_get_devdata(master); + + mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!mem_res) { + dev_err(&pdev->dev, "Unable to get IO resource\n"); + ret = -ENODEV; + goto free_master; + } + master->num_chipselect = num_cs; + + for (i = 0; i < master->num_chipselect; i++) { + cs_gpio = of_get_named_gpio(pdev->dev.of_node, "cs-gpios", i); + if (cs_gpio < 0) { + dev_err(&pdev->dev, "can't get cs gpio from DT\n"); + ret = -ENODEV; + goto free_master; + } + + sspi->chipselect[i] = cs_gpio; + if (cs_gpio == 0) + continue; /* use cs from spi controller */ + + ret = gpio_request(cs_gpio, DRIVER_NAME); + if (ret) { + while (i > 0) { + i--; + if (sspi->chipselect[i] > 0) + gpio_free(sspi->chipselect[i]); + } + dev_err(&pdev->dev, "fail to request cs gpios\n"); + goto free_master; + } + } + + sspi->base = devm_request_and_ioremap(&pdev->dev, mem_res); + if (!sspi->base) { + dev_err(&pdev->dev, "IO remap failed!\n"); + ret = -ENOMEM; + goto free_master; + } + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + ret = -ENXIO; + goto free_master; + } + ret = devm_request_irq(&pdev->dev, irq, spi_sirfsoc_irq, 0, + DRIVER_NAME, sspi); + if (ret) + goto free_master; + + sspi->bitbang.master = spi_master_get(master); + sspi->bitbang.chipselect = spi_sirfsoc_chipselect; + sspi->bitbang.setup_transfer = spi_sirfsoc_setup_transfer; + sspi->bitbang.txrx_bufs = spi_sirfsoc_transfer; + sspi->bitbang.master->setup = spi_sirfsoc_setup; + master->bus_num = pdev->id; + sspi->bitbang.master->dev.of_node = pdev->dev.of_node; + + sspi->pmx = pinmux_get(&pdev->dev, NULL); + ret = IS_ERR(sspi->pmx); + if (ret) + goto free_master; + + pinmux_enable(sspi->pmx); + + sspi->clk = clk_get(&pdev->dev, NULL); + if (IS_ERR(sspi->clk)) { + ret = -EINVAL; + goto free_pmx; + } + clk_enable(sspi->clk); + sspi->ctrl_freq = clk_get_rate(sspi->clk); + + init_completion(&sspi->done); + + tasklet_init(&sspi->tasklet_tx, spi_sirfsoc_tasklet_tx, + (unsigned long)sspi); + + writel(SIRFSOC_SPI_FIFO_RESET, sspi->base + SIRFSOC_SPI_RXFIFO_OP); + writel(SIRFSOC_SPI_FIFO_RESET, sspi->base + SIRFSOC_SPI_TXFIFO_OP); + writel(SIRFSOC_SPI_FIFO_START, sspi->base + SIRFSOC_SPI_RXFIFO_OP); + writel(SIRFSOC_SPI_FIFO_START, sspi->base + SIRFSOC_SPI_TXFIFO_OP); + /* We are not using dummy delay between command and data */ + writel(0, sspi->base + SIRFSOC_SPI_DUMMY_DELAY_CTL); + + ret = spi_bitbang_start(&sspi->bitbang); + if (ret) + goto free_clk; + + dev_info(&pdev->dev, "registerred, bus number = %d\n", master->bus_num); + + return 0; + +free_clk: + clk_disable(sspi->clk); + clk_put(sspi->clk); +free_pmx: + pinmux_disable(sspi->pmx); + pinmux_put(sspi->pmx); +free_master: + spi_master_put(master); +err_cs: + return ret; +} + +static int __devexit spi_sirfsoc_remove(struct platform_device *pdev) +{ + struct spi_master *master; + struct sirfsoc_spi *sspi; + int i; + + master = platform_get_drvdata(pdev); + sspi = spi_master_get_devdata(master); + + spi_bitbang_stop(&sspi->bitbang); + for (i = 0; i < master->num_chipselect; i++) { + if (sspi->chipselect[i] > 0) + gpio_free(sspi->chipselect[i]); + } + clk_disable(sspi->clk); + clk_put(sspi->clk); + pinmux_disable(sspi->pmx); + pinmux_put(sspi->pmx); + spi_master_put(master); + return 0; +} + +#ifdef CONFIG_PM +static int spi_sirfsoc_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct spi_master *master = platform_get_drvdata(pdev); + struct sirfsoc_spi *sspi = spi_master_get_devdata(master); + + clk_disable(sspi->clk); + return 0; +} + +static int spi_sirfsoc_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct spi_master *master = platform_get_drvdata(pdev); + struct sirfsoc_spi *sspi = spi_master_get_devdata(master); + + clk_enable(sspi->clk); + writel(SIRFSOC_SPI_FIFO_RESET, sspi->base + SIRFSOC_SPI_RXFIFO_OP); + writel(SIRFSOC_SPI_FIFO_RESET, sspi->base + SIRFSOC_SPI_TXFIFO_OP); + writel(SIRFSOC_SPI_FIFO_START, sspi->base + SIRFSOC_SPI_RXFIFO_OP); + writel(SIRFSOC_SPI_FIFO_START, sspi->base + SIRFSOC_SPI_TXFIFO_OP); + + return 0; +} + +static const struct dev_pm_ops spi_sirfsoc_pm_ops = { + .suspend = spi_sirfsoc_suspend, + .resume = spi_sirfsoc_resume, +}; +#endif + +static const struct of_device_id spi_sirfsoc_of_match[] = { + { .compatible = "sirf,prima2-spi", }, + {} +}; +MODULE_DEVICE_TABLE(of, sirfsoc_spi_of_match); + +static struct platform_driver spi_sirfsoc_driver = { + .driver = { + .name = DRIVER_NAME, + .owner = THIS_MODULE, +#ifdef CONFIG_PM + .pm = &spi_sirfsoc_pm_ops, +#endif + .of_match_table = spi_sirfsoc_of_match, + }, + .probe = spi_sirfsoc_probe, + .remove = __devexit_p(spi_sirfsoc_remove), +}; +module_platform_driver(spi_sirfsoc_driver); + +MODULE_DESCRIPTION("SiRF SoC SPI master driver"); +MODULE_AUTHOR("Zhiwu Song <Zhiwu.Song@csr.com>, " + "Barry Song <Baohua.Song@csr.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/spi/spi-topcliff-pch.c b/drivers/spi/spi-topcliff-pch.c index 10182eb50068..5c6fa5ed3366 100644 --- a/drivers/spi/spi-topcliff-pch.c +++ b/drivers/spi/spi-topcliff-pch.c @@ -196,6 +196,7 @@ struct pch_spi_data { struct pch_spi_dma_ctrl dma; int use_dma; u8 irq_reg_sts; + int save_total_len; }; /** @@ -216,7 +217,7 @@ struct pch_pd_dev_save { struct pch_spi_board_data *board_dat; }; -static struct pci_device_id pch_spi_pcidev_id[] = { +static DEFINE_PCI_DEVICE_TABLE(pch_spi_pcidev_id) = { { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_GE_SPI), 1, }, { PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7213_SPI), 2, }, { PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7223_SPI), 1, }, @@ -318,22 +319,23 @@ static void pch_spi_handler_sub(struct pch_spi_data *data, u32 reg_spsr_val, data->tx_index = tx_index; data->rx_index = rx_index; - } - - /* if transfer complete interrupt */ - if (reg_spsr_val & SPSR_FI_BIT) { - if ((tx_index == bpw_len) && (rx_index == tx_index)) { - /* disable interrupts */ - pch_spi_setclr_reg(data->master, PCH_SPCR, 0, PCH_ALL); - - /* transfer is completed; - inform pch_spi_process_messages */ - data->transfer_complete = true; - data->transfer_active = false; - wake_up(&data->wait); - } else { - dev_err(&data->master->dev, - "%s : Transfer is not completed", __func__); + /* if transfer complete interrupt */ + if (reg_spsr_val & SPSR_FI_BIT) { + if ((tx_index == bpw_len) && (rx_index == tx_index)) { + /* disable interrupts */ + pch_spi_setclr_reg(data->master, PCH_SPCR, 0, + PCH_ALL); + + /* transfer is completed; + inform pch_spi_process_messages */ + data->transfer_complete = true; + data->transfer_active = false; + wake_up(&data->wait); + } else { + dev_err(&data->master->dev, + "%s : Transfer is not completed", + __func__); + } } } } @@ -822,11 +824,13 @@ static void pch_spi_copy_rx_data_for_dma(struct pch_spi_data *data, int bpw) rx_dma_buf = data->dma.rx_buf_virt; for (j = 0; j < data->bpw_len; j++) *rx_buf++ = *rx_dma_buf++ & 0xFF; + data->cur_trans->rx_buf = rx_buf; } else { rx_sbuf = data->cur_trans->rx_buf; rx_dma_sbuf = data->dma.rx_buf_virt; for (j = 0; j < data->bpw_len; j++) *rx_sbuf++ = *rx_dma_sbuf++; + data->cur_trans->rx_buf = rx_sbuf; } } @@ -852,6 +856,9 @@ static int pch_spi_start_transfer(struct pch_spi_data *data) rtn = wait_event_interruptible_timeout(data->wait, data->transfer_complete, msecs_to_jiffies(2 * HZ)); + if (!rtn) + dev_err(&data->master->dev, + "%s wait-event timeout\n", __func__); dma_sync_sg_for_cpu(&data->master->dev, dma->sg_rx_p, dma->nent, DMA_FROM_DEVICE); @@ -923,7 +930,8 @@ static void pch_spi_request_dma(struct pch_spi_data *data, int bpw) dma_cap_set(DMA_SLAVE, mask); /* Get DMA's dev information */ - dma_dev = pci_get_bus_and_slot(2, PCI_DEVFN(12, 0)); + dma_dev = pci_get_bus_and_slot(data->board_dat->pdev->bus->number, + PCI_DEVFN(12, 0)); /* Set Tx DMA */ param = &dma->param_tx; @@ -987,6 +995,7 @@ static void pch_spi_handle_dma(struct pch_spi_data *data, int *bpw) int i; int size; int rem; + int head; unsigned long flags; struct pch_spi_dma_ctrl *dma; @@ -1015,6 +1024,11 @@ static void pch_spi_handle_dma(struct pch_spi_data *data, int *bpw) } data->bpw_len = data->cur_trans->len / (*bpw / 8); + if (data->bpw_len > PCH_BUF_SIZE) { + data->bpw_len = PCH_BUF_SIZE; + data->cur_trans->len -= PCH_BUF_SIZE; + } + /* copy Tx Data */ if (data->cur_trans->tx_buf != NULL) { if (*bpw == 8) { @@ -1029,10 +1043,17 @@ static void pch_spi_handle_dma(struct pch_spi_data *data, int *bpw) *tx_dma_sbuf++ = *tx_sbuf++; } } + + /* Calculate Rx parameter for DMA transmitting */ if (data->bpw_len > PCH_DMA_TRANS_SIZE) { - num = data->bpw_len / PCH_DMA_TRANS_SIZE + 1; + if (data->bpw_len % PCH_DMA_TRANS_SIZE) { + num = data->bpw_len / PCH_DMA_TRANS_SIZE + 1; + rem = data->bpw_len % PCH_DMA_TRANS_SIZE; + } else { + num = data->bpw_len / PCH_DMA_TRANS_SIZE; + rem = PCH_DMA_TRANS_SIZE; + } size = PCH_DMA_TRANS_SIZE; - rem = data->bpw_len % PCH_DMA_TRANS_SIZE; } else { num = 1; size = data->bpw_len; @@ -1092,15 +1113,23 @@ static void pch_spi_handle_dma(struct pch_spi_data *data, int *bpw) dma->nent = num; dma->desc_rx = desc_rx; - /* TX */ - if (data->bpw_len > PCH_DMA_TRANS_SIZE) { - num = data->bpw_len / PCH_DMA_TRANS_SIZE; + /* Calculate Tx parameter for DMA transmitting */ + if (data->bpw_len > PCH_MAX_FIFO_DEPTH) { + head = PCH_MAX_FIFO_DEPTH - PCH_DMA_TRANS_SIZE; + if (data->bpw_len % PCH_DMA_TRANS_SIZE > 4) { + num = data->bpw_len / PCH_DMA_TRANS_SIZE + 1; + rem = data->bpw_len % PCH_DMA_TRANS_SIZE - head; + } else { + num = data->bpw_len / PCH_DMA_TRANS_SIZE; + rem = data->bpw_len % PCH_DMA_TRANS_SIZE + + PCH_DMA_TRANS_SIZE - head; + } size = PCH_DMA_TRANS_SIZE; - rem = 16; } else { num = 1; size = data->bpw_len; rem = data->bpw_len; + head = 0; } dma->sg_tx_p = kzalloc(sizeof(struct scatterlist)*num, GFP_ATOMIC); @@ -1110,11 +1139,17 @@ static void pch_spi_handle_dma(struct pch_spi_data *data, int *bpw) for (i = 0; i < num; i++, sg++) { if (i == 0) { sg->offset = 0; + sg_set_page(sg, virt_to_page(dma->tx_buf_virt), size + head, + sg->offset); + sg_dma_len(sg) = size + head; + } else if (i == (num - 1)) { + sg->offset = head + size * i; + sg->offset = sg->offset * (*bpw / 8); sg_set_page(sg, virt_to_page(dma->tx_buf_virt), rem, sg->offset); sg_dma_len(sg) = rem; } else { - sg->offset = rem + size * (i - 1); + sg->offset = head + size * i; sg->offset = sg->offset * (*bpw / 8); sg_set_page(sg, virt_to_page(dma->tx_buf_virt), size, sg->offset); @@ -1202,6 +1237,7 @@ static void pch_spi_process_messages(struct work_struct *pwork) data->current_msg->spi->bits_per_word); pch_spi_writereg(data->master, PCH_SSNXCR, SSN_NO_CONTROL); do { + int cnt; /* If we are already processing a message get the next transfer structure from the message otherwise retrieve the 1st transfer request from the message. */ @@ -1221,11 +1257,28 @@ static void pch_spi_process_messages(struct work_struct *pwork) } spin_unlock(&data->lock); + if (!data->cur_trans->len) + goto out; + cnt = (data->cur_trans->len - 1) / PCH_BUF_SIZE + 1; + data->save_total_len = data->cur_trans->len; if (data->use_dma) { - pch_spi_handle_dma(data, &bpw); - if (!pch_spi_start_transfer(data)) - goto out; - pch_spi_copy_rx_data_for_dma(data, bpw); + int i; + char *save_rx_buf = data->cur_trans->rx_buf; + for (i = 0; i < cnt; i ++) { + pch_spi_handle_dma(data, &bpw); + if (!pch_spi_start_transfer(data)) { + data->transfer_complete = true; + data->current_msg->status = -EIO; + data->current_msg->complete + (data->current_msg->context); + data->bcurrent_msg_processing = false; + data->current_msg = NULL; + data->cur_trans = NULL; + goto out; + } + pch_spi_copy_rx_data_for_dma(data, bpw); + } + data->cur_trans->rx_buf = save_rx_buf; } else { pch_spi_set_tx(data, &bpw); pch_spi_set_ir(data); @@ -1236,6 +1289,7 @@ static void pch_spi_process_messages(struct work_struct *pwork) data->pkt_tx_buff = NULL; } /* increment message count */ + data->cur_trans->len = data->save_total_len; data->current_msg->actual_length += data->cur_trans->len; dev_dbg(&data->master->dev, @@ -1388,6 +1442,7 @@ static int __devinit pch_spi_pd_probe(struct platform_device *plat_dev) master->num_chipselect = PCH_MAX_CS; master->setup = pch_spi_setup; master->transfer = pch_spi_transfer; + master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST; data->board_dat = board_dat; data->plat_dev = plat_dev; diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index b2ccdea30cb9..3d8f662e4fe9 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -30,6 +30,9 @@ #include <linux/of_spi.h> #include <linux/pm_runtime.h> #include <linux/export.h> +#include <linux/sched.h> +#include <linux/delay.h> +#include <linux/kthread.h> static void spidev_release(struct device *dev) { @@ -481,7 +484,7 @@ static void spi_match_master_to_boardinfo(struct spi_master *master, * The board info passed can safely be __initdata ... but be careful of * any embedded pointers (platform_data, etc), they're copied as-is. */ -int __init +int __devinit spi_register_board_info(struct spi_board_info const *info, unsigned n) { struct boardinfo *bi; @@ -507,6 +510,294 @@ spi_register_board_info(struct spi_board_info const *info, unsigned n) /*-------------------------------------------------------------------------*/ +/** + * spi_pump_messages - kthread work function which processes spi message queue + * @work: pointer to kthread work struct contained in the master struct + * + * This function checks if there is any spi message in the queue that + * needs processing and if so call out to the driver to initialize hardware + * and transfer each message. + * + */ +static void spi_pump_messages(struct kthread_work *work) +{ + struct spi_master *master = + container_of(work, struct spi_master, pump_messages); + unsigned long flags; + bool was_busy = false; + int ret; + + /* Lock queue and check for queue work */ + spin_lock_irqsave(&master->queue_lock, flags); + if (list_empty(&master->queue) || !master->running) { + if (master->busy) { + ret = master->unprepare_transfer_hardware(master); + if (ret) { + spin_unlock_irqrestore(&master->queue_lock, flags); + dev_err(&master->dev, + "failed to unprepare transfer hardware\n"); + return; + } + } + master->busy = false; + spin_unlock_irqrestore(&master->queue_lock, flags); + return; + } + + /* Make sure we are not already running a message */ + if (master->cur_msg) { + spin_unlock_irqrestore(&master->queue_lock, flags); + return; + } + /* Extract head of queue */ + master->cur_msg = + list_entry(master->queue.next, struct spi_message, queue); + + list_del_init(&master->cur_msg->queue); + if (master->busy) + was_busy = true; + else + master->busy = true; + spin_unlock_irqrestore(&master->queue_lock, flags); + + if (!was_busy) { + ret = master->prepare_transfer_hardware(master); + if (ret) { + dev_err(&master->dev, + "failed to prepare transfer hardware\n"); + return; + } + } + + ret = master->transfer_one_message(master, master->cur_msg); + if (ret) { + dev_err(&master->dev, + "failed to transfer one message from queue\n"); + return; + } +} + +static int spi_init_queue(struct spi_master *master) +{ + struct sched_param param = { .sched_priority = MAX_RT_PRIO - 1 }; + + INIT_LIST_HEAD(&master->queue); + spin_lock_init(&master->queue_lock); + + master->running = false; + master->busy = false; + + init_kthread_worker(&master->kworker); + master->kworker_task = kthread_run(kthread_worker_fn, + &master->kworker, + dev_name(&master->dev)); + if (IS_ERR(master->kworker_task)) { + dev_err(&master->dev, "failed to create message pump task\n"); + return -ENOMEM; + } + init_kthread_work(&master->pump_messages, spi_pump_messages); + + /* + * Master config will indicate if this controller should run the + * message pump with high (realtime) priority to reduce the transfer + * latency on the bus by minimising the delay between a transfer + * request and the scheduling of the message pump thread. Without this + * setting the message pump thread will remain at default priority. + */ + if (master->rt) { + dev_info(&master->dev, + "will run message pump with realtime priority\n"); + sched_setscheduler(master->kworker_task, SCHED_FIFO, ¶m); + } + + return 0; +} + +/** + * spi_get_next_queued_message() - called by driver to check for queued + * messages + * @master: the master to check for queued messages + * + * If there are more messages in the queue, the next message is returned from + * this call. + */ +struct spi_message *spi_get_next_queued_message(struct spi_master *master) +{ + struct spi_message *next; + unsigned long flags; + + /* get a pointer to the next message, if any */ + spin_lock_irqsave(&master->queue_lock, flags); + if (list_empty(&master->queue)) + next = NULL; + else + next = list_entry(master->queue.next, + struct spi_message, queue); + spin_unlock_irqrestore(&master->queue_lock, flags); + + return next; +} +EXPORT_SYMBOL_GPL(spi_get_next_queued_message); + +/** + * spi_finalize_current_message() - the current message is complete + * @master: the master to return the message to + * + * Called by the driver to notify the core that the message in the front of the + * queue is complete and can be removed from the queue. + */ +void spi_finalize_current_message(struct spi_master *master) +{ + struct spi_message *mesg; + unsigned long flags; + + spin_lock_irqsave(&master->queue_lock, flags); + mesg = master->cur_msg; + master->cur_msg = NULL; + + queue_kthread_work(&master->kworker, &master->pump_messages); + spin_unlock_irqrestore(&master->queue_lock, flags); + + mesg->state = NULL; + if (mesg->complete) + mesg->complete(mesg->context); +} +EXPORT_SYMBOL_GPL(spi_finalize_current_message); + +static int spi_start_queue(struct spi_master *master) +{ + unsigned long flags; + + spin_lock_irqsave(&master->queue_lock, flags); + + if (master->running || master->busy) { + spin_unlock_irqrestore(&master->queue_lock, flags); + return -EBUSY; + } + + master->running = true; + master->cur_msg = NULL; + spin_unlock_irqrestore(&master->queue_lock, flags); + + queue_kthread_work(&master->kworker, &master->pump_messages); + + return 0; +} + +static int spi_stop_queue(struct spi_master *master) +{ + unsigned long flags; + unsigned limit = 500; + int ret = 0; + + spin_lock_irqsave(&master->queue_lock, flags); + + /* + * This is a bit lame, but is optimized for the common execution path. + * A wait_queue on the master->busy could be used, but then the common + * execution path (pump_messages) would be required to call wake_up or + * friends on every SPI message. Do this instead. + */ + while ((!list_empty(&master->queue) || master->busy) && limit--) { + spin_unlock_irqrestore(&master->queue_lock, flags); + msleep(10); + spin_lock_irqsave(&master->queue_lock, flags); + } + + if (!list_empty(&master->queue) || master->busy) + ret = -EBUSY; + else + master->running = false; + + spin_unlock_irqrestore(&master->queue_lock, flags); + + if (ret) { + dev_warn(&master->dev, + "could not stop message queue\n"); + return ret; + } + return ret; +} + +static int spi_destroy_queue(struct spi_master *master) +{ + int ret; + + ret = spi_stop_queue(master); + + /* + * flush_kthread_worker will block until all work is done. + * If the reason that stop_queue timed out is that the work will never + * finish, then it does no good to call flush/stop thread, so + * return anyway. + */ + if (ret) { + dev_err(&master->dev, "problem destroying queue\n"); + return ret; + } + + flush_kthread_worker(&master->kworker); + kthread_stop(master->kworker_task); + + return 0; +} + +/** + * spi_queued_transfer - transfer function for queued transfers + * @spi: spi device which is requesting transfer + * @msg: spi message which is to handled is queued to driver queue + */ +static int spi_queued_transfer(struct spi_device *spi, struct spi_message *msg) +{ + struct spi_master *master = spi->master; + unsigned long flags; + + spin_lock_irqsave(&master->queue_lock, flags); + + if (!master->running) { + spin_unlock_irqrestore(&master->queue_lock, flags); + return -ESHUTDOWN; + } + msg->actual_length = 0; + msg->status = -EINPROGRESS; + + list_add_tail(&msg->queue, &master->queue); + if (master->running && !master->busy) + queue_kthread_work(&master->kworker, &master->pump_messages); + + spin_unlock_irqrestore(&master->queue_lock, flags); + return 0; +} + +static int spi_master_initialize_queue(struct spi_master *master) +{ + int ret; + + master->queued = true; + master->transfer = spi_queued_transfer; + + /* Initialize and start queue */ + ret = spi_init_queue(master); + if (ret) { + dev_err(&master->dev, "problem initializing queue\n"); + goto err_init_queue; + } + ret = spi_start_queue(master); + if (ret) { + dev_err(&master->dev, "problem starting queue\n"); + goto err_start_queue; + } + + return 0; + +err_start_queue: +err_init_queue: + spi_destroy_queue(master); + return ret; +} + +/*-------------------------------------------------------------------------*/ + static void spi_master_release(struct device *dev) { struct spi_master *master; @@ -522,6 +813,7 @@ static struct class spi_master_class = { }; + /** * spi_alloc_master - allocate SPI master controller * @dev: the controller, possibly using the platform_bus @@ -539,7 +831,8 @@ static struct class spi_master_class = { * * The caller is responsible for assigning the bus number and initializing * the master's methods before calling spi_register_master(); and (after errors - * adding the device) calling spi_master_put() to prevent a memory leak. + * adding the device) calling spi_master_put() and kfree() to prevent a memory + * leak. */ struct spi_master *spi_alloc_master(struct device *dev, unsigned size) { @@ -621,14 +914,23 @@ int spi_register_master(struct spi_master *master) dev_dbg(dev, "registered master %s%s\n", dev_name(&master->dev), dynamic ? " (dynamic)" : ""); + /* If we're using a queued driver, start the queue */ + if (master->transfer) + dev_info(dev, "master is unqueued, this is deprecated\n"); + else { + status = spi_master_initialize_queue(master); + if (status) { + device_unregister(&master->dev); + goto done; + } + } + mutex_lock(&board_lock); list_add_tail(&master->list, &spi_master_list); list_for_each_entry(bi, &board_list, list) spi_match_master_to_boardinfo(master, &bi->board_info); mutex_unlock(&board_lock); - status = 0; - /* Register devices from the device tree */ of_register_spi_devices(master); done: @@ -636,7 +938,6 @@ done: } EXPORT_SYMBOL_GPL(spi_register_master); - static int __unregister(struct device *dev, void *null) { spi_unregister_device(to_spi_device(dev)); @@ -657,6 +958,11 @@ void spi_unregister_master(struct spi_master *master) { int dummy; + if (master->queued) { + if (spi_destroy_queue(master)) + dev_err(&master->dev, "queue remove failed\n"); + } + mutex_lock(&board_lock); list_del(&master->list); mutex_unlock(&board_lock); @@ -666,6 +972,37 @@ void spi_unregister_master(struct spi_master *master) } EXPORT_SYMBOL_GPL(spi_unregister_master); +int spi_master_suspend(struct spi_master *master) +{ + int ret; + + /* Basically no-ops for non-queued masters */ + if (!master->queued) + return 0; + + ret = spi_stop_queue(master); + if (ret) + dev_err(&master->dev, "queue stop failed\n"); + + return ret; +} +EXPORT_SYMBOL_GPL(spi_master_suspend); + +int spi_master_resume(struct spi_master *master) +{ + int ret; + + if (!master->queued) + return 0; + + ret = spi_start_queue(master); + if (ret) + dev_err(&master->dev, "queue restart failed\n"); + + return ret; +} +EXPORT_SYMBOL_GPL(spi_master_resume); + static int __spi_master_match(struct device *dev, void *data) { struct spi_master *m; diff --git a/include/linux/amba/pl022.h b/include/linux/amba/pl022.h index 572f637299c9..3672f40f3455 100644 --- a/include/linux/amba/pl022.h +++ b/include/linux/amba/pl022.h @@ -241,6 +241,8 @@ struct dma_chan; * @autosuspend_delay: delay in ms following transfer completion before the * runtime power management system suspends the device. A setting of 0 * indicates no delay and the device will be suspended immediately. + * @rt: indicates the controller should run the message pump with realtime + * priority to minimise the transfer latency on the bus. */ struct pl022_ssp_controller { u16 bus_id; @@ -250,6 +252,7 @@ struct pl022_ssp_controller { void *dma_rx_param; void *dma_tx_param; int autosuspend_delay; + bool rt; }; /** diff --git a/include/linux/spi/sh_hspi.h b/include/linux/spi/sh_hspi.h new file mode 100644 index 000000000000..a1121f872ac1 --- /dev/null +++ b/include/linux/spi/sh_hspi.h @@ -0,0 +1,23 @@ +/* + * Copyright (C) 2011 Kuninori Morimoto + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ +#ifndef SH_HSPI_H +#define SH_HSPI_H + +struct sh_hspi_info { +}; + +#endif diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index 176fce9cc6b1..98679b061b63 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -22,6 +22,7 @@ #include <linux/device.h> #include <linux/mod_devicetable.h> #include <linux/slab.h> +#include <linux/kthread.h> /* * INTERFACES between SPI master-side drivers and SPI infrastructure. @@ -235,6 +236,27 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv) * the device whose settings are being modified. * @transfer: adds a message to the controller's transfer queue. * @cleanup: frees controller-specific state + * @queued: whether this master is providing an internal message queue + * @kworker: thread struct for message pump + * @kworker_task: pointer to task for message pump kworker thread + * @pump_messages: work struct for scheduling work to the message pump + * @queue_lock: spinlock to syncronise access to message queue + * @queue: message queue + * @cur_msg: the currently in-flight message + * @busy: message pump is busy + * @running: message pump is running + * @rt: whether this queue is set to run as a realtime task + * @prepare_transfer_hardware: a message will soon arrive from the queue + * so the subsystem requests the driver to prepare the transfer hardware + * by issuing this call + * @transfer_one_message: the subsystem calls the driver to transfer a single + * message while queuing transfers that arrive in the meantime. When the + * driver is finished with this message, it must call + * spi_finalize_current_message() so the subsystem can issue the next + * transfer + * @prepare_transfer_hardware: there are currently no more messages on the + * queue so the subsystem notifies the driver that it may relax the + * hardware by issuing this call * * Each SPI master controller can communicate with one or more @spi_device * children. These make a small bus, sharing MOSI, MISO and SCK signals @@ -318,6 +340,28 @@ struct spi_master { /* called on release() to free memory provided by spi_master */ void (*cleanup)(struct spi_device *spi); + + /* + * These hooks are for drivers that want to use the generic + * master transfer queueing mechanism. If these are used, the + * transfer() function above must NOT be specified by the driver. + * Over time we expect SPI drivers to be phased over to this API. + */ + bool queued; + struct kthread_worker kworker; + struct task_struct *kworker_task; + struct kthread_work pump_messages; + spinlock_t queue_lock; + struct list_head queue; + struct spi_message *cur_msg; + bool busy; + bool running; + bool rt; + + int (*prepare_transfer_hardware)(struct spi_master *master); + int (*transfer_one_message)(struct spi_master *master, + struct spi_message *mesg); + int (*unprepare_transfer_hardware)(struct spi_master *master); }; static inline void *spi_master_get_devdata(struct spi_master *master) @@ -343,6 +387,13 @@ static inline void spi_master_put(struct spi_master *master) put_device(&master->dev); } +/* PM calls that need to be issued by the driver */ +extern int spi_master_suspend(struct spi_master *master); +extern int spi_master_resume(struct spi_master *master); + +/* Calls the driver make to interact with the message queue */ +extern struct spi_message *spi_get_next_queued_message(struct spi_master *master); +extern void spi_finalize_current_message(struct spi_master *master); /* the spi driver core manages memory for the spi_master classdev */ extern struct spi_master * @@ -549,7 +600,7 @@ static inline struct spi_message *spi_message_alloc(unsigned ntrans, gfp_t flags + ntrans * sizeof(struct spi_transfer), flags); if (m) { - int i; + unsigned i; struct spi_transfer *t = (struct spi_transfer *)(m + 1); INIT_LIST_HEAD(&m->transfers); |