diff options
| -rw-r--r-- | drivers/pci/controller/pcie-mediatek-gen3.c | 59 |
1 files changed, 41 insertions, 18 deletions
diff --git a/drivers/pci/controller/pcie-mediatek-gen3.c b/drivers/pci/controller/pcie-mediatek-gen3.c index aa511965eb91..1edf5d6708c2 100644 --- a/drivers/pci/controller/pcie-mediatek-gen3.c +++ b/drivers/pci/controller/pcie-mediatek-gen3.c @@ -135,10 +135,18 @@ struct mtk_gen3_pcie; #define PCIE_CONF_LINK2_CTL_STS (PCIE_CFG_OFFSET_ADDR + 0xb0) #define PCIE_CONF_LINK2_LCR2_LINK_SPEED GENMASK(3, 0) +enum mtk_gen3_pcie_flags { + SKIP_PCIE_RSTB = BIT(0), /* Skip PERST# assertion during device + * probing or suspend/resume phase to + * avoid hw bugs/issues. + */ +}; + /** * struct mtk_gen3_pcie_pdata - differentiate between host generations * @power_up: pcie power_up callback * @phy_resets: phy reset lines SoC data. + * @flags: pcie device flags. */ struct mtk_gen3_pcie_pdata { int (*power_up)(struct mtk_gen3_pcie *pcie); @@ -146,6 +154,7 @@ struct mtk_gen3_pcie_pdata { const char *id[MAX_NUM_PHY_RESETS]; int num_resets; } phy_resets; + u32 flags; }; /** @@ -440,22 +449,33 @@ static int mtk_pcie_startup_port(struct mtk_gen3_pcie *pcie) val |= PCIE_DISABLE_DVFSRC_VLT_REQ; writel_relaxed(val, pcie->base + PCIE_MISC_CTRL_REG); - /* Assert all reset signals */ - val = readl_relaxed(pcie->base + PCIE_RST_CTRL_REG); - val |= PCIE_MAC_RSTB | PCIE_PHY_RSTB | PCIE_BRG_RSTB | PCIE_PE_RSTB; - writel_relaxed(val, pcie->base + PCIE_RST_CTRL_REG); - /* - * Described in PCIe CEM specification sections 2.2 (PERST# Signal) - * and 2.2.1 (Initial Power-Up (G3 to S0)). - * The deassertion of PERST# should be delayed 100ms (TPVPERL) - * for the power and clock to become stable. + * Airoha EN7581 has a hw bug asserting/releasing PCIE_PE_RSTB signal + * causing occasional PCIe link down. In order to overcome the issue, + * PCIE_RSTB signals are not asserted/released at this stage and the + * PCIe block is reset using en7523_reset_assert() and + * en7581_pci_enable(). */ - msleep(100); - - /* De-assert reset signals */ - val &= ~(PCIE_MAC_RSTB | PCIE_PHY_RSTB | PCIE_BRG_RSTB | PCIE_PE_RSTB); - writel_relaxed(val, pcie->base + PCIE_RST_CTRL_REG); + if (!(pcie->soc->flags & SKIP_PCIE_RSTB)) { + /* Assert all reset signals */ + val = readl_relaxed(pcie->base + PCIE_RST_CTRL_REG); + val |= PCIE_MAC_RSTB | PCIE_PHY_RSTB | PCIE_BRG_RSTB | + PCIE_PE_RSTB; + writel_relaxed(val, pcie->base + PCIE_RST_CTRL_REG); + + /* + * Described in PCIe CEM specification revision 6.0. + * + * The deassertion of PERST# should be delayed 100ms (TPVPERL) + * for the power and clock to become stable. + */ + msleep(PCIE_T_PVPERL_MS); + + /* De-assert reset signals */ + val &= ~(PCIE_MAC_RSTB | PCIE_PHY_RSTB | PCIE_BRG_RSTB | + PCIE_PE_RSTB); + writel_relaxed(val, pcie->base + PCIE_RST_CTRL_REG); + } /* Check if the link is up or not */ err = readl_poll_timeout(pcie->base + PCIE_LINK_STATUS_REG, val, @@ -1242,10 +1262,12 @@ static int mtk_pcie_suspend_noirq(struct device *dev) return err; } - /* Pull down the PERST# pin */ - val = readl_relaxed(pcie->base + PCIE_RST_CTRL_REG); - val |= PCIE_PE_RSTB; - writel_relaxed(val, pcie->base + PCIE_RST_CTRL_REG); + if (!(pcie->soc->flags & SKIP_PCIE_RSTB)) { + /* Assert the PERST# pin */ + val = readl_relaxed(pcie->base + PCIE_RST_CTRL_REG); + val |= PCIE_PE_RSTB; + writel_relaxed(val, pcie->base + PCIE_RST_CTRL_REG); + } dev_dbg(pcie->dev, "entered L2 states successfully"); @@ -1296,6 +1318,7 @@ static const struct mtk_gen3_pcie_pdata mtk_pcie_soc_en7581 = { .id[2] = "phy-lane2", .num_resets = 3, }, + .flags = SKIP_PCIE_RSTB, }; static const struct of_device_id mtk_pcie_of_match[] = { |