diff options
| -rw-r--r-- | Documentation/hwmon/index.rst | 1 | ||||
| -rw-r--r-- | Documentation/hwmon/powerz.rst | 30 | ||||
| -rw-r--r-- | MAINTAINERS | 7 | ||||
| -rw-r--r-- | drivers/hwmon/Kconfig | 10 | ||||
| -rw-r--r-- | drivers/hwmon/Makefile | 1 | ||||
| -rw-r--r-- | drivers/hwmon/powerz.c | 274 |
6 files changed, 323 insertions, 0 deletions
diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst index 88dadea85cfc..10a54644557d 100644 --- a/Documentation/hwmon/index.rst +++ b/Documentation/hwmon/index.rst @@ -178,6 +178,7 @@ Hardware Monitoring Kernel Drivers peci-cputemp peci-dimmtemp pmbus + powerz powr1220 pxe1610 pwm-fan diff --git a/Documentation/hwmon/powerz.rst b/Documentation/hwmon/powerz.rst new file mode 100644 index 000000000000..317084e0b76b --- /dev/null +++ b/Documentation/hwmon/powerz.rst @@ -0,0 +1,30 @@ +.. SPDX-License-Identifier: GPL-2.0-or-later + +Kernel driver POWERZ +==================== + +Supported chips: + + * ChargerLAB POWER-Z KM003C + + Prefix: 'powerz' + + Addresses scanned: - + +Author: + + - Thomas Weißschuh <linux@weissschuh.net> + +Description +----------- + +This driver implements support for the ChargerLAB POWER-Z USB-C power testing +family. + +The device communicates with the custom protocol over USB. + +The channel labels exposed via hwmon match the labels used by the on-device +display and the official POWER-Z PC software. + +As current can flow in both directions through the tester the sign of the +channel "curr1_input" (label "IBUS") indicates the direction. diff --git a/MAINTAINERS b/MAINTAINERS index b19995690904..44d394dc97c7 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4794,6 +4794,13 @@ X: drivers/char/ipmi/ X: drivers/char/random.c X: drivers/char/tpm/ +CHARGERLAB POWER-Z HARDWARE MONITOR DRIVER +M: Thomas Weißschuh <linux@weissschuh.net> +L: linux-hwmon@vger.kernel.org +S: Maintained +F: Documentation/hwmon/powerz.rst +F: drivers/hwmon/powerz.c + CHECKPATCH M: Andy Whitcroft <apw@canonical.com> M: Joe Perches <joe@perches.com> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index ec38c8892158..12af9f9cfd9f 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -839,6 +839,16 @@ config SENSORS_JC42 This driver can also be built as a module. If so, the module will be called jc42. +config SENSORS_POWERZ + tristate "ChargerLAB POWER-Z USB-C tester" + depends on USB + help + If you say yes here you get support for ChargerLAB POWER-Z series of + USB-C charging testers. + + This driver can also be built as a module. If so, the module + will be called powerz. + config SENSORS_POWR1220 tristate "Lattice POWR1220 Power Monitoring" depends on I2C diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index 4ac9452b5430..019189500e5d 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -176,6 +176,7 @@ obj-$(CONFIG_SENSORS_OXP) += oxp-sensors.o obj-$(CONFIG_SENSORS_PC87360) += pc87360.o obj-$(CONFIG_SENSORS_PC87427) += pc87427.o obj-$(CONFIG_SENSORS_PCF8591) += pcf8591.o +obj-$(CONFIG_SENSORS_POWERZ) += powerz.o obj-$(CONFIG_SENSORS_POWR1220) += powr1220.o obj-$(CONFIG_SENSORS_PWM_FAN) += pwm-fan.o obj-$(CONFIG_SENSORS_RASPBERRYPI_HWMON) += raspberrypi-hwmon.o diff --git a/drivers/hwmon/powerz.c b/drivers/hwmon/powerz.c new file mode 100644 index 000000000000..2b9693aee6f6 --- /dev/null +++ b/drivers/hwmon/powerz.c @@ -0,0 +1,274 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2023 Thomas Weißschuh <linux@weissschuh.net> + */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/completion.h> +#include <linux/device.h> +#include <linux/hwmon.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/types.h> +#include <linux/usb.h> + +#define DRIVER_NAME "powerz" +#define POWERZ_EP_CMD_OUT 0x01 +#define POWERZ_EP_DATA_IN 0x81 + +struct powerz_sensor_data { + u8 _unknown_1[8]; + __le32 V_bus; + __le32 I_bus; + __le32 V_bus_avg; + __le32 I_bus_avg; + u8 _unknown_2[8]; + u8 temp[2]; + __le16 V_cc1; + __le16 V_cc2; + __le16 V_dp; + __le16 V_dm; + __le16 V_dd; + u8 _unknown_3[4]; +} __packed; + +struct powerz_priv { + char transfer_buffer[64]; /* first member to satisfy DMA alignment */ + struct mutex mutex; + struct completion completion; + struct urb *urb; + int status; +}; + +static const struct hwmon_channel_info *const powerz_info[] = { + HWMON_CHANNEL_INFO(in, + HWMON_I_INPUT | HWMON_I_LABEL | HWMON_I_AVERAGE, + HWMON_I_INPUT | HWMON_I_LABEL, + HWMON_I_INPUT | HWMON_I_LABEL, + HWMON_I_INPUT | HWMON_I_LABEL, + HWMON_I_INPUT | HWMON_I_LABEL, + HWMON_I_INPUT | HWMON_I_LABEL), + HWMON_CHANNEL_INFO(curr, + HWMON_C_INPUT | HWMON_C_LABEL | HWMON_C_AVERAGE), + HWMON_CHANNEL_INFO(temp, HWMON_T_INPUT | HWMON_T_LABEL), + NULL +}; + +static umode_t powerz_is_visible(const void *data, enum hwmon_sensor_types type, + u32 attr, int channel) +{ + return 0444; +} + +static int powerz_read_string(struct device *dev, enum hwmon_sensor_types type, + u32 attr, int channel, const char **str) +{ + if (type == hwmon_curr && attr == hwmon_curr_label) { + *str = "IBUS"; + } else if (type == hwmon_in && attr == hwmon_in_label) { + if (channel == 0) + *str = "VBUS"; + else if (channel == 1) + *str = "VCC1"; + else if (channel == 2) + *str = "VCC2"; + else if (channel == 3) + *str = "VDP"; + else if (channel == 4) + *str = "VDM"; + else if (channel == 5) + *str = "VDD"; + else + return -EOPNOTSUPP; + } else if (type == hwmon_temp && attr == hwmon_temp_label) { + *str = "TEMP"; + } else { + return -EOPNOTSUPP; + } + + return 0; +} + +static void powerz_usb_data_complete(struct urb *urb) +{ + struct powerz_priv *priv = urb->context; + + complete(&priv->completion); +} + +static void powerz_usb_cmd_complete(struct urb *urb) +{ + struct powerz_priv *priv = urb->context; + + usb_fill_bulk_urb(urb, urb->dev, + usb_rcvbulkpipe(urb->dev, POWERZ_EP_DATA_IN), + priv->transfer_buffer, sizeof(priv->transfer_buffer), + powerz_usb_data_complete, priv); + + priv->status = usb_submit_urb(urb, GFP_ATOMIC); + if (priv->status) + complete(&priv->completion); +} + +static int powerz_read_data(struct usb_device *udev, struct powerz_priv *priv) +{ + int ret; + + priv->status = -ETIMEDOUT; + reinit_completion(&priv->completion); + + priv->transfer_buffer[0] = 0x0c; + priv->transfer_buffer[1] = 0x00; + priv->transfer_buffer[2] = 0x02; + priv->transfer_buffer[3] = 0x00; + + usb_fill_bulk_urb(priv->urb, udev, + usb_sndbulkpipe(udev, POWERZ_EP_CMD_OUT), + priv->transfer_buffer, 4, powerz_usb_cmd_complete, + priv); + ret = usb_submit_urb(priv->urb, GFP_KERNEL); + if (ret) + return ret; + + if (!wait_for_completion_interruptible_timeout + (&priv->completion, msecs_to_jiffies(5))) { + usb_kill_urb(priv->urb); + return -EIO; + } + + if (priv->urb->actual_length < sizeof(struct powerz_sensor_data)) + return -EIO; + + return priv->status; +} + +static int powerz_read(struct device *dev, enum hwmon_sensor_types type, + u32 attr, int channel, long *val) +{ + struct usb_interface *intf = to_usb_interface(dev->parent); + struct usb_device *udev = interface_to_usbdev(intf); + struct powerz_priv *priv = usb_get_intfdata(intf); + struct powerz_sensor_data *data; + int ret; + + if (!priv) + return -EIO; /* disconnected */ + + mutex_lock(&priv->mutex); + ret = powerz_read_data(udev, priv); + if (ret) + goto out; + + data = (struct powerz_sensor_data *)priv->transfer_buffer; + + if (type == hwmon_curr) { + if (attr == hwmon_curr_input) + *val = ((s32)le32_to_cpu(data->I_bus)) / 1000; + else if (attr == hwmon_curr_average) + *val = ((s32)le32_to_cpu(data->I_bus_avg)) / 1000; + else + ret = -EOPNOTSUPP; + } else if (type == hwmon_in) { + if (attr == hwmon_in_input) { + if (channel == 0) + *val = le32_to_cpu(data->V_bus) / 1000; + else if (channel == 1) + *val = le16_to_cpu(data->V_cc1) / 10; + else if (channel == 2) + *val = le16_to_cpu(data->V_cc2) / 10; + else if (channel == 3) + *val = le16_to_cpu(data->V_dp) / 10; + else if (channel == 4) + *val = le16_to_cpu(data->V_dm) / 10; + else if (channel == 5) + *val = le16_to_cpu(data->V_dd) / 10; + else + ret = -EOPNOTSUPP; + } else if (attr == hwmon_in_average && channel == 0) { + *val = le32_to_cpu(data->V_bus_avg) / 1000; + } else { + ret = -EOPNOTSUPP; + } + } else if (type == hwmon_temp && attr == hwmon_temp_input) { + *val = data->temp[1] * 2000 + data->temp[0] * 1000 / 128; + } else { + ret = -EOPNOTSUPP; + } + +out: + mutex_unlock(&priv->mutex); + return ret; +} + +static const struct hwmon_ops powerz_hwmon_ops = { + .is_visible = powerz_is_visible, + .read = powerz_read, + .read_string = powerz_read_string, +}; + +static const struct hwmon_chip_info powerz_chip_info = { + .ops = &powerz_hwmon_ops, + .info = powerz_info, +}; + +static int powerz_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct powerz_priv *priv; + struct device *hwmon_dev; + struct device *parent; + + parent = &intf->dev; + + priv = devm_kzalloc(parent, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->urb = usb_alloc_urb(0, GFP_KERNEL); + if (!priv->urb) + return -ENOMEM; + mutex_init(&priv->mutex); + init_completion(&priv->completion); + + hwmon_dev = + devm_hwmon_device_register_with_info(parent, DRIVER_NAME, priv, + &powerz_chip_info, NULL); + if (IS_ERR(hwmon_dev)) { + usb_free_urb(priv->urb); + return PTR_ERR(hwmon_dev); + } + + usb_set_intfdata(intf, priv); + + return 0; +} + +static void powerz_disconnect(struct usb_interface *intf) +{ + struct powerz_priv *priv = usb_get_intfdata(intf); + + mutex_lock(&priv->mutex); + usb_kill_urb(priv->urb); + usb_free_urb(priv->urb); + mutex_unlock(&priv->mutex); +} + +static const struct usb_device_id powerz_id_table[] = { + { USB_DEVICE_INTERFACE_NUMBER(0x5FC9, 0x0063, 0x00) }, /* ChargerLAB POWER-Z KM003C */ + { } +}; + +MODULE_DEVICE_TABLE(usb, powerz_id_table); + +static struct usb_driver powerz_driver = { + .name = DRIVER_NAME, + .id_table = powerz_id_table, + .probe = powerz_probe, + .disconnect = powerz_disconnect, +}; + +module_usb_driver(powerz_driver); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Thomas Weißschuh <linux@weissschuh.net>"); +MODULE_DESCRIPTION("ChargerLAB POWER-Z USB-C tester"); |