diff options
-rw-r--r-- | Documentation/devicetree/bindings/hwmon/ti,ads7828.yaml | 2 | ||||
-rw-r--r-- | drivers/hwmon/corsair-psu.c | 14 | ||||
-rw-r--r-- | drivers/hwmon/scpi-hwmon.c | 9 | ||||
-rw-r--r-- | drivers/hwmon/tps23861.c | 17 |
4 files changed, 39 insertions, 3 deletions
diff --git a/Documentation/devicetree/bindings/hwmon/ti,ads7828.yaml b/Documentation/devicetree/bindings/hwmon/ti,ads7828.yaml index 33ee575bb09d..926be9a29044 100644 --- a/Documentation/devicetree/bindings/hwmon/ti,ads7828.yaml +++ b/Documentation/devicetree/bindings/hwmon/ti,ads7828.yaml @@ -49,7 +49,7 @@ examples: #size-cells = <0>; adc@48 { - comatible = "ti,ads7828"; + compatible = "ti,ads7828"; reg = <0x48>; vref-supply = <&vref>; ti,differential-input; diff --git a/drivers/hwmon/corsair-psu.c b/drivers/hwmon/corsair-psu.c index 02298b86b57b..731d5117f9f1 100644 --- a/drivers/hwmon/corsair-psu.c +++ b/drivers/hwmon/corsair-psu.c @@ -771,6 +771,16 @@ static int corsairpsu_raw_event(struct hid_device *hdev, struct hid_report *repo return 0; } +#ifdef CONFIG_PM +static int corsairpsu_resume(struct hid_device *hdev) +{ + struct corsairpsu_data *priv = hid_get_drvdata(hdev); + + /* some PSUs turn off the microcontroller during standby, so a reinit is required */ + return corsairpsu_init(priv); +} +#endif + static const struct hid_device_id corsairpsu_idtable[] = { { HID_USB_DEVICE(0x1b1c, 0x1c03) }, /* Corsair HX550i */ { HID_USB_DEVICE(0x1b1c, 0x1c04) }, /* Corsair HX650i */ @@ -793,6 +803,10 @@ static struct hid_driver corsairpsu_driver = { .probe = corsairpsu_probe, .remove = corsairpsu_remove, .raw_event = corsairpsu_raw_event, +#ifdef CONFIG_PM + .resume = corsairpsu_resume, + .reset_resume = corsairpsu_resume, +#endif }; module_hid_driver(corsairpsu_driver); diff --git a/drivers/hwmon/scpi-hwmon.c b/drivers/hwmon/scpi-hwmon.c index 25aac40f2764..919877970ae3 100644 --- a/drivers/hwmon/scpi-hwmon.c +++ b/drivers/hwmon/scpi-hwmon.c @@ -99,6 +99,15 @@ scpi_show_sensor(struct device *dev, struct device_attribute *attr, char *buf) scpi_scale_reading(&value, sensor); + /* + * Temperature sensor values are treated as signed values based on + * observation even though that is not explicitly specified, and + * because an unsigned u64 temperature does not really make practical + * sense especially when the temperature is below zero degrees Celsius. + */ + if (sensor->info.class == TEMPERATURE) + return sprintf(buf, "%lld\n", (s64)value); + return sprintf(buf, "%llu\n", value); } diff --git a/drivers/hwmon/tps23861.c b/drivers/hwmon/tps23861.c index c2484f15298b..8bd6435c13e8 100644 --- a/drivers/hwmon/tps23861.c +++ b/drivers/hwmon/tps23861.c @@ -99,11 +99,14 @@ #define POWER_ENABLE 0x19 #define TPS23861_NUM_PORTS 4 +#define TPS23861_GENERAL_MASK_1 0x17 +#define TPS23861_CURRENT_SHUNT_MASK BIT(0) + #define TEMPERATURE_LSB 652 /* 0.652 degrees Celsius */ #define VOLTAGE_LSB 3662 /* 3.662 mV */ #define SHUNT_RESISTOR_DEFAULT 255000 /* 255 mOhm */ -#define CURRENT_LSB_255 62260 /* 62.260 uA */ -#define CURRENT_LSB_250 61039 /* 61.039 uA */ +#define CURRENT_LSB_250 62260 /* 62.260 uA */ +#define CURRENT_LSB_255 61039 /* 61.039 uA */ #define RESISTANCE_LSB 110966 /* 11.0966 Ohm*/ #define RESISTANCE_LSB_LOW 157216 /* 15.7216 Ohm*/ @@ -117,6 +120,7 @@ struct tps23861_data { static struct regmap_config tps23861_regmap_config = { .reg_bits = 8, .val_bits = 8, + .max_register = 0x6f, }; static int tps23861_read_temp(struct tps23861_data *data, long *val) @@ -560,6 +564,15 @@ static int tps23861_probe(struct i2c_client *client) else data->shunt_resistor = SHUNT_RESISTOR_DEFAULT; + if (data->shunt_resistor == SHUNT_RESISTOR_DEFAULT) + regmap_clear_bits(data->regmap, + TPS23861_GENERAL_MASK_1, + TPS23861_CURRENT_SHUNT_MASK); + else + regmap_set_bits(data->regmap, + TPS23861_GENERAL_MASK_1, + TPS23861_CURRENT_SHUNT_MASK); + hwmon_dev = devm_hwmon_device_register_with_info(dev, client->name, data, &tps23861_chip_info, NULL); |