Merge tag 'net-6.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from Jakub Kicinski:
 "Including fixes from wireless, bpf and netfilter.

  Happy summer solstice! The line count is a bit inflated by a selftest
  and update to a driver's FW interface header, in reality this is
  slightly below average for us. We are expecting one driver fix from
  Intel, but there are no big known issues.

  Current release - regressions:

   - ipv6: bring NLM_DONE out to a separate recv() again

  Current release - new code bugs:

   - wifi: cfg80211: wext: set ssids=NULL for passive scans via old wext API

  Previous releases - regressions:

   - wifi: mac80211: fix monitor channel setting with chanctx emulation
     (probably most awaited of the fixes in this PR, tracked by Thorsten)

   - usb: ax88179_178a: bring back reset on init, if PHY is disconnected

   - bpf: fix UML x86_64 compile failure with BPF

   - bpf: avoid splat in pskb_pull_reason(), sanity check added can be hit
     with malicious BPF

   - eth: mvpp2: use slab_build_skb() for packets in slab, driver was
     missed during API refactoring

   - wifi: iwlwifi: add missing unlock of mvm mutex

  Previous releases - always broken:

   - ipv6: add a number of missing null-checks for in6_dev_get(), in case
     IPv6 disabling races with the datapath

   - bpf: fix reg_set_min_max corruption of fake_reg

   - sched: act_ct: add netns as part of the key of tcf_ct_flow_table"

* tag 'net-6.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (63 commits)
  net: usb: rtl8150 fix unintiatilzed variables in rtl8150_get_link_ksettings
  selftests: virtio_net: add forgotten config options
  bnxt_en: Restore PTP tx_avail count in case of skb_pad() error
  bnxt_en: Set TSO max segs on devices with limits
  bnxt_en: Update firmware interface to 1.10.3.44
  net: stmmac: Assign configured channel value to EXTTS event
  net: do not leave a dangling sk pointer, when socket creation fails
  net/tcp_ao: Don't leak ao_info on error-path
  ice: Fix VSI list rule with ICE_SW_LKUP_LAST type
  ipv6: bring NLM_DONE out to a separate recv() again
  selftests: add selftest for the SRv6 End.DX6 behavior with netfilter
  selftests: add selftest for the SRv6 End.DX4 behavior with netfilter
  netfilter: move the sysctl nf_hooks_lwtunnel into the netfilter core
  seg6: fix parameter passing when calling NF_HOOK() in End.DX4 and End.DX6 behaviors
  netfilter: ipset: Fix suspicious rcu_dereference_protected()
  selftests: openvswitch: Set value to nla flags.
  octeontx2-pf: Fix linking objects into multiple modules
  octeontx2-pf: Add error handling to VLAN unoffload handling
  virtio_net: fixing XDP for fully checksummed packets handling
  virtio_net: checksum offloading handling fix
  ...

10 files changed, 759 insertions, 21 deletions

diff --git a/tools/testing/selftests/bpf/prog_tests/verifier.c b/tools/testing/selftests/bpf/prog_tests/verifier.c
index 1c9c4ec1be11..98ef39efa77e 100644
--- a/tools/testing/selftests/bpf/prog_tests/verifier.c
+++ b/tools/testing/selftests/bpf/prog_tests/verifier.c
@@ -53,6 +53,7 @@
 #include "verifier_movsx.skel.h"
 #include "verifier_netfilter_ctx.skel.h"
 #include "verifier_netfilter_retcode.skel.h"
+#include "verifier_or_jmp32_k.skel.h"
 #include "verifier_precision.skel.h"
 #include "verifier_prevent_map_lookup.skel.h"
 #include "verifier_raw_stack.skel.h"
@@ -170,6 +171,7 @@ void test_verifier_meta_access(void)          { RUN(verifier_meta_access); }
 void test_verifier_movsx(void)                 { RUN(verifier_movsx); }
 void test_verifier_netfilter_ctx(void)        { RUN(verifier_netfilter_ctx); }
 void test_verifier_netfilter_retcode(void)    { RUN(verifier_netfilter_retcode); }
+void test_verifier_or_jmp32_k(void)           { RUN(verifier_or_jmp32_k); }
 void test_verifier_precision(void)            { RUN(verifier_precision); }
 void test_verifier_prevent_map_lookup(void)   { RUN(verifier_prevent_map_lookup); }
 void test_verifier_raw_stack(void)            { RUN(verifier_raw_stack); }
diff --git a/tools/testing/selftests/bpf/progs/verifier_or_jmp32_k.c b/tools/testing/selftests/bpf/progs/verifier_or_jmp32_k.c
new file mode 100644
index 000000000000..f37713a265ac
--- /dev/null
+++ b/tools/testing/selftests/bpf/progs/verifier_or_jmp32_k.c
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/bpf.h>
+#include <bpf/bpf_helpers.h>
+#include "bpf_misc.h"
+
+SEC("socket")
+__description("or_jmp32_k: bit ops + branch on unknown value")
+__failure
+__msg("R0 invalid mem access 'scalar'")
+__naked void or_jmp32_k(void)
+{
+	asm volatile ("					\
+	r0 = 0xffffffff;				\
+	r0 /= 1;					\
+	r1 = 0;						\
+	w1 = -1;					\
+	w1 >>= 1;					\
+	w0 &= w1;					\
+	w0 |= 2;					\
+	if w0 != 0x7ffffffd goto l1;			\
+	r0 = 1;						\
+	exit;						\
+l3:							\
+	r0 = 5;						\
+	*(u64*)(r0 - 8) = r0;				\
+	exit;						\
+l2:							\
+	w0 -= 0xe;					\
+	if w0 == 1 goto l3;				\
+	r0 = 4;						\
+	exit;						\
+l1:							\
+	w0 -= 0x7ffffff0;				\
+	if w0 s>= 0xe goto l2;				\
+	r0 = 3;						\
+	exit;						\
+"	::: __clobber_all);
+}
+
+char _license[] SEC("license") = "GPL";
diff --git a/tools/testing/selftests/drivers/net/virtio_net/config b/tools/testing/selftests/drivers/net/virtio_net/config
index f35de0542b60..bcf7555eaffe 100644
--- a/tools/testing/selftests/drivers/net/virtio_net/config
+++ b/tools/testing/selftests/drivers/net/virtio_net/config
@@ -1,2 +1,8 @@
-CONFIG_VIRTIO_NET=y
+CONFIG_BPF_SYSCALL=y
+CONFIG_CGROUP_BPF=y
+CONFIG_IPV6=y
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_NET_L3_MASTER_DEV=y
+CONFIG_NET_VRF=m
 CONFIG_VIRTIO_DEBUG=y
+CONFIG_VIRTIO_NET=y
diff --git a/tools/testing/selftests/net/Makefile b/tools/testing/selftests/net/Makefile
index bd01e4a0be2c..d9393569d03a 100644
--- a/tools/testing/selftests/net/Makefile
+++ b/tools/testing/selftests/net/Makefile
@@ -43,6 +43,8 @@ TEST_PROGS += srv6_hl2encap_red_l2vpn_test.sh
 TEST_PROGS += srv6_end_next_csid_l3vpn_test.sh
 TEST_PROGS += srv6_end_x_next_csid_l3vpn_test.sh
 TEST_PROGS += srv6_end_flavors_test.sh
+TEST_PROGS += srv6_end_dx4_netfilter_test.sh
+TEST_PROGS += srv6_end_dx6_netfilter_test.sh
 TEST_PROGS += vrf_strict_mode_test.sh
 TEST_PROGS += arp_ndisc_evict_nocarrier.sh
 TEST_PROGS += ndisc_unsolicited_na_test.sh
diff --git a/tools/testing/selftests/net/config b/tools/testing/selftests/net/config
index 04de7a6ba6f3..d4891f7a2bfa 100644
--- a/tools/testing/selftests/net/config
+++ b/tools/testing/selftests/net/config
@@ -101,3 +101,5 @@ CONFIG_NETFILTER_XT_MATCH_POLICY=m
 CONFIG_CRYPTO_ARIA=y
 CONFIG_XFRM_INTERFACE=m
 CONFIG_XFRM_USER=m
+CONFIG_IP_NF_MATCH_RPFILTER=m
+CONFIG_IP6_NF_MATCH_RPFILTER=m
diff --git a/tools/testing/selftests/net/mptcp/userspace_pm.sh b/tools/testing/selftests/net/mptcp/userspace_pm.sh
index 9e2981f2d7f5..9cb05978269d 100755
--- a/tools/testing/selftests/net/mptcp/userspace_pm.sh
+++ b/tools/testing/selftests/net/mptcp/userspace_pm.sh
@@ -160,10 +160,12 @@ make_connection()
 	local is_v6=$1
 	local app_port=$app4_port
 	local connect_addr="10.0.1.1"
+	local client_addr="10.0.1.2"
 	local listen_addr="0.0.0.0"
 	if [ "$is_v6" = "v6" ]
 	then
 		connect_addr="dead:beef:1::1"
+		client_addr="dead:beef:1::2"
 		listen_addr="::"
 		app_port=$app6_port
 	else
@@ -206,6 +208,7 @@ make_connection()
 		   [ "$server_serverside" = 1 ]
 	then
 		test_pass
+		print_title "Connection info: ${client_addr}:${client_port} -> ${connect_addr}:${app_port}"
 	else
 		test_fail "Expected tokens (c:${client_token} - s:${server_token}) and server (c:${client_serverside} - s:${server_serverside})"
 		mptcp_lib_result_print_all_tap
@@ -297,7 +300,7 @@ test_announce()
 	ip netns exec "$ns2"\
 	   ./pm_nl_ctl ann 10.0.2.2 token "$client4_token" id $client_addr_id dev\
 	   ns2eth1
-	print_test "ADD_ADDR id:${client_addr_id} 10.0.2.2 (ns2) => ns1, reuse port"
+	print_test "ADD_ADDR id:client 10.0.2.2 (ns2) => ns1, reuse port"
 	sleep 0.5
 	verify_announce_event $server_evts $ANNOUNCED $server4_token "10.0.2.2" $client_addr_id \
 			      "$client4_port"
@@ -306,7 +309,7 @@ test_announce()
 	:>"$server_evts"
 	ip netns exec "$ns2" ./pm_nl_ctl ann\
 	   dead:beef:2::2 token "$client6_token" id $client_addr_id dev ns2eth1
-	print_test "ADD_ADDR6 id:${client_addr_id} dead:beef:2::2 (ns2) => ns1, reuse port"
+	print_test "ADD_ADDR6 id:client dead:beef:2::2 (ns2) => ns1, reuse port"
 	sleep 0.5
 	verify_announce_event "$server_evts" "$ANNOUNCED" "$server6_token" "dead:beef:2::2"\
 			      "$client_addr_id" "$client6_port" "v6"
@@ -316,7 +319,7 @@ test_announce()
 	client_addr_id=$((client_addr_id+1))
 	ip netns exec "$ns2" ./pm_nl_ctl ann 10.0.2.2 token "$client4_token" id\
 	   $client_addr_id dev ns2eth1 port $new4_port
-	print_test "ADD_ADDR id:${client_addr_id} 10.0.2.2 (ns2) => ns1, new port"
+	print_test "ADD_ADDR id:client+1 10.0.2.2 (ns2) => ns1, new port"
 	sleep 0.5
 	verify_announce_event "$server_evts" "$ANNOUNCED" "$server4_token" "10.0.2.2"\
 			      "$client_addr_id" "$new4_port"
@@ -327,7 +330,7 @@ test_announce()
 	# ADD_ADDR from the server to client machine reusing the subflow port
 	ip netns exec "$ns1" ./pm_nl_ctl ann 10.0.2.1 token "$server4_token" id\
 	   $server_addr_id dev ns1eth2
-	print_test "ADD_ADDR id:${server_addr_id} 10.0.2.1 (ns1) => ns2, reuse port"
+	print_test "ADD_ADDR id:server 10.0.2.1 (ns1) => ns2, reuse port"
 	sleep 0.5
 	verify_announce_event "$client_evts" "$ANNOUNCED" "$client4_token" "10.0.2.1"\
 			      "$server_addr_id" "$app4_port"
@@ -336,7 +339,7 @@ test_announce()
 	:>"$client_evts"
 	ip netns exec "$ns1" ./pm_nl_ctl ann dead:beef:2::1 token "$server6_token" id\
 	   $server_addr_id dev ns1eth2
-	print_test "ADD_ADDR6 id:${server_addr_id} dead:beef:2::1 (ns1) => ns2, reuse port"
+	print_test "ADD_ADDR6 id:server dead:beef:2::1 (ns1) => ns2, reuse port"
 	sleep 0.5
 	verify_announce_event "$client_evts" "$ANNOUNCED" "$client6_token" "dead:beef:2::1"\
 			      "$server_addr_id" "$app6_port" "v6"
@@ -346,7 +349,7 @@ test_announce()
 	server_addr_id=$((server_addr_id+1))
 	ip netns exec "$ns1" ./pm_nl_ctl ann 10.0.2.1 token "$server4_token" id\
 	   $server_addr_id dev ns1eth2 port $new4_port
-	print_test "ADD_ADDR id:${server_addr_id} 10.0.2.1 (ns1) => ns2, new port"
+	print_test "ADD_ADDR id:server+1 10.0.2.1 (ns1) => ns2, new port"
 	sleep 0.5
 	verify_announce_event "$client_evts" "$ANNOUNCED" "$client4_token" "10.0.2.1"\
 			      "$server_addr_id" "$new4_port"
@@ -380,7 +383,7 @@ test_remove()
 	local invalid_token=$(( client4_token - 1 ))
 	ip netns exec "$ns2" ./pm_nl_ctl rem token $invalid_token id\
 	   $client_addr_id > /dev/null 2>&1
-	print_test "RM_ADDR id:${client_addr_id} ns2 => ns1, invalid token"
+	print_test "RM_ADDR id:client ns2 => ns1, invalid token"
 	local type
 	type=$(mptcp_lib_evts_get_info type "$server_evts")
 	if [ "$type" = "" ]
@@ -394,7 +397,7 @@ test_remove()
 	local invalid_id=$(( client_addr_id + 1 ))
 	ip netns exec "$ns2" ./pm_nl_ctl rem token "$client4_token" id\
 	   $invalid_id > /dev/null 2>&1
-	print_test "RM_ADDR id:${invalid_id} ns2 => ns1, invalid id"
+	print_test "RM_ADDR id:client+1 ns2 => ns1, invalid id"
 	type=$(mptcp_lib_evts_get_info type "$server_evts")
 	if [ "$type" = "" ]
 	then
@@ -407,7 +410,7 @@ test_remove()
 	:>"$server_evts"
 	ip netns exec "$ns2" ./pm_nl_ctl rem token "$client4_token" id\
 	   $client_addr_id
-	print_test "RM_ADDR id:${client_addr_id} ns2 => ns1"
+	print_test "RM_ADDR id:client ns2 => ns1"
 	sleep 0.5
 	verify_remove_event "$server_evts" "$REMOVED" "$server4_token" "$client_addr_id"
 
@@ -416,7 +419,7 @@ test_remove()
 	client_addr_id=$(( client_addr_id - 1 ))
 	ip netns exec "$ns2" ./pm_nl_ctl rem token "$client4_token" id\
 	   $client_addr_id
-	print_test "RM_ADDR id:${client_addr_id} ns2 => ns1"
+	print_test "RM_ADDR id:client-1 ns2 => ns1"
 	sleep 0.5
 	verify_remove_event "$server_evts" "$REMOVED" "$server4_token" "$client_addr_id"
 
@@ -424,7 +427,7 @@ test_remove()
 	:>"$server_evts"
 	ip netns exec "$ns2" ./pm_nl_ctl rem token "$client6_token" id\
 	   $client_addr_id
-	print_test "RM_ADDR6 id:${client_addr_id} ns2 => ns1"
+	print_test "RM_ADDR6 id:client-1 ns2 => ns1"
 	sleep 0.5
 	verify_remove_event "$server_evts" "$REMOVED" "$server6_token" "$client_addr_id"
 
@@ -434,7 +437,7 @@ test_remove()
 	# RM_ADDR from the server to client machine
 	ip netns exec "$ns1" ./pm_nl_ctl rem token "$server4_token" id\
 	   $server_addr_id
-	print_test "RM_ADDR id:${server_addr_id} ns1 => ns2"
+	print_test "RM_ADDR id:server ns1 => ns2"
 	sleep 0.5
 	verify_remove_event "$client_evts" "$REMOVED" "$client4_token" "$server_addr_id"
 
@@ -443,7 +446,7 @@ test_remove()
 	server_addr_id=$(( server_addr_id - 1 ))
 	ip netns exec "$ns1" ./pm_nl_ctl rem token "$server4_token" id\
 	   $server_addr_id
-	print_test "RM_ADDR id:${server_addr_id} ns1 => ns2"
+	print_test "RM_ADDR id:server-1 ns1 => ns2"
 	sleep 0.5
 	verify_remove_event "$client_evts" "$REMOVED" "$client4_token" "$server_addr_id"
 
@@ -451,7 +454,7 @@ test_remove()
 	:>"$client_evts"
 	ip netns exec "$ns1" ./pm_nl_ctl rem token "$server6_token" id\
 	   $server_addr_id
-	print_test "RM_ADDR6 id:${server_addr_id} ns1 => ns2"
+	print_test "RM_ADDR6 id:server-1 ns1 => ns2"
 	sleep 0.5
 	verify_remove_event "$client_evts" "$REMOVED" "$client6_token" "$server_addr_id"
 }
@@ -479,8 +482,14 @@ verify_subflow_events()
 	local locid
 	local remid
 	local info
+	local e_dport_txt
 
-	info="${e_saddr} (${e_from}) => ${e_daddr}:${e_dport} (${e_to})"
+	# only display the fixed ports
+	if [ "${e_dport}" -ge "${app4_port}" ] && [ "${e_dport}" -le "${app6_port}" ]; then
+		e_dport_txt=":${e_dport}"
+	fi
+
+	info="${e_saddr} (${e_from}) => ${e_daddr}${e_dport_txt} (${e_to})"
 
 	if [ "$e_type" = "$SUB_ESTABLISHED" ]
 	then
@@ -766,7 +775,7 @@ test_subflows_v4_v6_mix()
 	:>"$client_evts"
 	ip netns exec "$ns1" ./pm_nl_ctl ann 10.0.2.1 token "$server6_token" id\
 	   $server_addr_id dev ns1eth2
-	print_test "ADD_ADDR4 id:${server_addr_id} 10.0.2.1 (ns1) => ns2, reuse port"
+	print_test "ADD_ADDR4 id:server 10.0.2.1 (ns1) => ns2, reuse port"
 	sleep 0.5
 	verify_announce_event "$client_evts" "$ANNOUNCED" "$client6_token" "10.0.2.1"\
 			      "$server_addr_id" "$app6_port"
@@ -861,7 +870,7 @@ test_listener()
 	local listener_pid=$!
 
 	sleep 0.5
-	print_test "CREATE_LISTENER 10.0.2.2:$client4_port"
+	print_test "CREATE_LISTENER 10.0.2.2 (client port)"
 	verify_listener_events $client_evts $LISTENER_CREATED $AF_INET 10.0.2.2 $client4_port
 
 	# ADD_ADDR from client to server machine reusing the subflow port
@@ -878,13 +887,14 @@ test_listener()
 	mptcp_lib_kill_wait $listener_pid
 
 	sleep 0.5
-	print_test "CLOSE_LISTENER 10.0.2.2:$client4_port"
+	print_test "CLOSE_LISTENER 10.0.2.2 (client port)"
 	verify_listener_events $client_evts $LISTENER_CLOSED $AF_INET 10.0.2.2 $client4_port
 }
 
 print_title "Make connections"
 make_connection
 make_connection "v6"
+print_title "Will be using address IDs ${client_addr_id} (client) and ${server_addr_id} (server)"
 
 test_announce
 test_remove
diff --git a/tools/testing/selftests/net/openvswitch/openvswitch.sh b/tools/testing/selftests/net/openvswitch/openvswitch.sh
index 5cae53543849..15bca0708717 100755
--- a/tools/testing/selftests/net/openvswitch/openvswitch.sh
+++ b/tools/testing/selftests/net/openvswitch/openvswitch.sh
@@ -1,4 +1,4 @@
-#!/bin/sh
+#!/bin/bash
 # SPDX-License-Identifier: GPL-2.0
 #
 # OVS kernel module self tests
diff --git a/tools/testing/selftests/net/openvswitch/ovs-dpctl.py b/tools/testing/selftests/net/openvswitch/ovs-dpctl.py
index 1dd057afd3fb..9f8dec2f6539 100644
--- a/tools/testing/selftests/net/openvswitch/ovs-dpctl.py
+++ b/tools/testing/selftests/net/openvswitch/ovs-dpctl.py
@@ -531,7 +531,7 @@ class ovsactions(nla):
             for flat_act in parse_flat_map:
                 if parse_starts_block(actstr, flat_act[0], False):
                     actstr = actstr[len(flat_act[0]):]
-                    self["attrs"].append([flat_act[1]])
+                    self["attrs"].append([flat_act[1], True])
                     actstr = actstr[strspn(actstr, ", ") :]
                     parsed = True
 
diff --git a/tools/testing/selftests/net/srv6_end_dx4_netfilter_test.sh b/tools/testing/selftests/net/srv6_end_dx4_netfilter_test.sh
new file mode 100755
index 000000000000..e23210aa547f
--- /dev/null
+++ b/tools/testing/selftests/net/srv6_end_dx4_netfilter_test.sh
@@ -0,0 +1,335 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# author: Jianguo Wu <wujianguo@chinatelecom.cn>
+#
+# Mostly copied from tools/testing/selftests/net/srv6_end_dt4_l3vpn_test.sh.
+#
+# This script is designed for testing the support of netfilter hooks for
+# SRv6 End.DX4 behavior.
+#
+# Hereafter a network diagram is shown, where one tenants (named 100) offer
+# IPv4 L3 VPN services allowing hosts to communicate with each other across
+# an IPv6 network.
+#
+# Routers rt-1 and rt-2 implement IPv4 L3 VPN services leveraging the SRv6
+# architecture. The key components for such VPNs are: a) SRv6 Encap behavior,
+# b) SRv6 End.DX4 behavior.
+#
+# To explain how an IPv4 L3 VPN based on SRv6 works, let us briefly consider an
+# example where, within the same domain of tenant 100, the host hs-1 pings
+# the host hs-2.
+#
+# First of all, L2 reachability of the host hs-2 is taken into account by
+# the router rt-1 which acts as an arp proxy.
+#
+# When the host hs-1 sends an IPv4 packet destined to hs-2, the router rt-1
+# receives the packet on the internal veth-t100 interface, rt-1 contains the
+# SRv6 Encap route for encapsulating the IPv4 packet in a IPv6 plus the Segment
+# Routing Header (SRH) packet. This packet is sent through the (IPv6) core
+# network up to the router rt-2 that receives it on veth0 interface.
+#
+# The rt-2 router uses the 'localsid' routing table to process incoming
+# IPv6+SRH packets which belong to the VPN of the tenant 100. For each of these
+# packets, the SRv6 End.DX4 behavior removes the outer IPv6+SRH headers and
+# routs the packet to the specified nexthop. Afterwards, the packet is sent to
+# the host hs-2 through the veth-t100 interface.
+#
+# The ping response follows the same processing but this time the role of rt-1
+# and rt-2 are swapped.
+#
+# And when net.netfilter.nf_hooks_lwtunnel is set to 1 in rt-1 or rt-2, and a
+# rpfilter iptables rule is added, SRv6 packets will go through netfilter PREROUTING
+# hooks.
+#
+#
+# +-------------------+                                   +-------------------+
+# |                   |                                   |                   |
+# |    hs-1 netns     |                                   |     hs-2 netns    |
+# |                   |                                   |                   |
+# |  +-------------+  |                                   |  +-------------+  |
+# |  |    veth0    |  |                                   |  |    veth0    |  |
+# |  | 10.0.0.1/24 |  |                                   |  | 10.0.0.2/24 |  |
+# |  +-------------+  |                                   |  +-------------+  |
+# |        .          |                                   |         .         |
+# +-------------------+                                   +-------------------+
+#          .                                                        .
+#          .                                                        .
+#          .                                                        .
+# +-----------------------------------+   +-----------------------------------+
+# |        .                          |   |                         .         |
+# | +---------------+                 |   |                 +---------------- |
+# | |   veth-t100   |                 |   |                 |   veth-t100   | |
+# | | 10.0.0.11/24  |    +----------+ |   | +----------+    | 10.0.0.22/24  | |
+# | +-------+-------+   |   route   | |   | |   route  |    +-------+-------- |
+# |                     |   table   | |   | |   table  |                      |
+# |                      +----------+ |   | +----------+                      |
+# |                  +--------------+ |   | +--------------+                  |
+# |                 |      veth0    | |   | |   veth0       |                 |
+# |                 | 2001:11::1/64 |.|...|.| 2001:11::2/64 |                 |
+# |                  +--------------+ |   | +--------------+                  |
+# |                                   |   |                                   |
+# |                        rt-1 netns |   | rt-2 netns                        |
+# |                                   |   |                                   |
+# +-----------------------------------+   +-----------------------------------+
+#
+# ~~~~~~~~~~~~~~~~~~~~~~~~~
+# | Network configuration |
+# ~~~~~~~~~~~~~~~~~~~~~~~~~
+#
+# rt-1: localsid table
+# +----------------------------------------------------------------+
+# |SID              |Action                                        |
+# +----------------------------------------------------------------+
+# |fc00:21:100::6004|apply SRv6 End.DX4 nh4 10.0.0.1 dev veth-t100 |
+# +----------------------------------------------------------------+
+#
+# rt-1: route table
+# +---------------------------------------------------+
+# |host       |Action                                 |
+# +---------------------------------------------------+
+# |10.0.0.2   |apply seg6 encap segs fc00:12:100::6004|
+# +---------------------------------------------------+
+# |10.0.0.0/24|forward to dev veth_t100               |
+# +---------------------------------------------------+
+#
+#
+# rt-2: localsid table
+# +---------------------------------------------------------------+
+# |SID              |Action                                       |
+# +---------------------------------------------------------------+
+# |fc00:12:100::6004|apply SRv6 End.DX4 nh4 10.0.0.2 dev veth-t100|
+# +---------------------------------------------------------------+
+#
+# rt-2: route table
+# +---------------------------------------------------+
+# |host       |Action                                 |
+# +---------------------------------------------------+
+# |10.0.0.1   |apply seg6 encap segs fc00:21:100::6004|
+# +---------------------------------------------------+
+# |10.0.0.0/24|forward to dev veth_t100               |
+# +---------------------------------------------------+
+#
+
+# Kselftest framework requirement - SKIP code is 4.
+ksft_skip=4
+
+readonly IPv6_RT_NETWORK=2001:11
+readonly IPv4_HS_NETWORK=10.0.0
+readonly SID_LOCATOR=fc00
+
+PING_TIMEOUT_SEC=4
+
+ret=0
+
+PAUSE_ON_FAIL=${PAUSE_ON_FAIL:=no}
+
+log_test()
+{
+	local rc=$1
+	local expected=$2
+	local msg="$3"
+
+	if [ ${rc} -eq ${expected} ]; then
+		nsuccess=$((nsuccess+1))
+		printf "\n    TEST: %-60s  [ OK ]\n" "${msg}"
+	else
+		ret=1
+		nfail=$((nfail+1))
+		printf "\n    TEST: %-60s  [FAIL]\n" "${msg}"
+		if [ "${PAUSE_ON_FAIL}" = "yes" ]; then
+			echo
+			echo "hit enter to continue, 'q' to quit"
+			read a
+			[ "$a" = "q" ] && exit 1
+		fi
+	fi
+}
+
+print_log_test_results()
+{
+	if [ "$TESTS" != "none" ]; then
+		printf "\nTests passed: %3d\n" ${nsuccess}
+		printf "Tests failed: %3d\n"   ${nfail}
+	fi
+}
+
+log_section()
+{
+	echo
+	echo "################################################################################"
+	echo "TEST SECTION: $*"
+	echo "################################################################################"
+}
+
+cleanup()
+{
+	ip link del veth-rt-1 2>/dev/null || true
+	ip link del veth-rt-2 2>/dev/null || true
+
+	# destroy routers rt-* and hosts hs-*
+	for ns in $(ip netns show | grep -E 'rt-*|hs-*'); do
+		ip netns del ${ns} || true
+	done
+}
+
+# Setup the basic networking for the routers
+setup_rt_networking()
+{
+	local rt=$1
+	local nsname=rt-${rt}
+
+	ip netns add ${nsname}
+
+	ip netns exec ${nsname} sysctl -wq net.ipv6.conf.all.accept_dad=0
+	ip netns exec ${nsname} sysctl -wq net.ipv6.conf.default.accept_dad=0
+
+	ip link set veth-rt-${rt} netns ${nsname}
+	ip -netns ${nsname} link set veth-rt-${rt} name veth0
+
+	ip -netns ${nsname} addr add ${IPv6_RT_NETWORK}::${rt}/64 dev veth0 nodad
+	ip -netns ${nsname} link set veth0 up
+	ip -netns ${nsname} link set lo up
+
+	ip netns exec ${nsname} sysctl -wq net.ipv4.ip_forward=1
+	ip netns exec ${nsname} sysctl -wq net.ipv6.conf.all.forwarding=1
+}
+
+setup_rt_netfilter()
+{
+	local rt=$1
+	local nsname=rt-${rt}
+
+	ip netns exec ${nsname} sysctl -wq net.netfilter.nf_hooks_lwtunnel=1
+	ip netns exec ${nsname} iptables -t raw -A PREROUTING -m rpfilter --invert -j DROP
+}
+
+setup_hs()
+{
+	local hs=$1
+	local rt=$2
+	local tid=$3
+	local hsname=hs-${hs}
+	local rtname=rt-${rt}
+	local rtveth=veth-t${tid}
+
+	# set the networking for the host
+	ip netns add ${hsname}
+
+	ip -netns ${hsname} link add veth0 type veth peer name ${rtveth}
+	ip -netns ${hsname} link set ${rtveth} netns ${rtname}
+	ip -netns ${hsname} addr add ${IPv4_HS_NETWORK}.${hs}/24 dev veth0
+	ip -netns ${hsname} link set veth0 up
+	ip -netns ${hsname} link set lo up
+
+	ip -netns ${rtname} addr add ${IPv4_HS_NETWORK}.${rt}${hs}/24 dev ${rtveth}
+	ip -netns ${rtname} link set ${rtveth} up
+
+	ip netns exec ${rtname} sysctl -wq net.ipv4.conf.${rtveth}.proxy_arp=1
+}
+
+setup_vpn_config()
+{
+	local hssrc=$1
+	local rtsrc=$2
+	local hsdst=$3
+	local rtdst=$4
+	local tid=$5
+
+	local hssrc_name=hs-t${tid}-${hssrc}
+	local hsdst_name=hs-t${tid}-${hsdst}
+	local rtsrc_name=rt-${rtsrc}
+	local rtdst_name=rt-${rtdst}
+	local vpn_sid=${SID_LOCATOR}:${hssrc}${hsdst}:${tid}::6004
+
+	# set the encap route for encapsulating packets which arrive from the
+	# host hssrc and destined to the access router rtsrc.
+	ip -netns ${rtsrc_name} -4 route add ${IPv4_HS_NETWORK}.${hsdst}/32 \
+		encap seg6 mode encap segs ${vpn_sid} dev veth0
+	ip -netns ${rtsrc_name} -6 route add ${vpn_sid}/128 \
+		via 2001:11::${rtdst} dev veth0
+
+	# set the decap route for decapsulating packets which arrive from
+	# the rtdst router and destined to the hsdst host.
+	ip -netns ${rtdst_name} -6 route add ${vpn_sid}/128 \
+		encap seg6local action End.DX4 nh4 ${IPv4_HS_NETWORK}.${hsdst} dev veth-t${tid}
+}
+
+setup()
+{
+	ip link add veth-rt-1 type veth peer name veth-rt-2
+	# setup the networking for router rt-1 and router rt-2
+	setup_rt_networking 1
+	setup_rt_networking 2
+
+	# setup two hosts for the tenant 100.
+	#  - host hs-1 is directly connected to the router rt-1;
+	#  - host hs-2 is directly connected to the router rt-2.
+	setup_hs 1 1 100
+	setup_hs 2 2 100
+
+	# setup the IPv4 L3 VPN which connects the host hs-1 and host hs-2.
+	setup_vpn_config 1 1 2 2 100  #args: src_host src_router dst_host dst_router tenant
+	setup_vpn_config 2 2 1 1 100
+}
+
+check_hs_connectivity()
+{
+	local hssrc=$1
+	local hsdst=$2
+	local tid=$3
+
+	ip netns exec hs-${hssrc} ping -c 1 -W ${PING_TIMEOUT_SEC} \
+		${IPv4_HS_NETWORK}.${hsdst} >/dev/null 2>&1
+}
+
+check_and_log_hs_connectivity()
+{
+	local hssrc=$1
+	local hsdst=$2
+	local tid=$3
+
+	check_hs_connectivity ${hssrc} ${hsdst} ${tid}
+	log_test $? 0 "Hosts connectivity: hs-${hssrc} -> hs-${hsdst} (tenant ${tid})"
+}
+
+host_tests()
+{
+	log_section "SRv6 VPN connectivity test among hosts in the same tenant"
+
+	check_and_log_hs_connectivity 1 2 100
+	check_and_log_hs_connectivity 2 1 100
+}
+
+router_netfilter_tests()
+{
+	log_section "SRv6 VPN connectivity test with netfilter enabled in routers"
+	setup_rt_netfilter 1
+	setup_rt_netfilter 2
+
+	check_and_log_hs_connectivity 1 2 100
+	check_and_log_hs_connectivity 2 1 100
+}
+
+if [ "$(id -u)" -ne 0 ];then
+	echo "SKIP: Need root privileges"
+	exit $ksft_skip
+fi
+
+if [ ! -x "$(command -v ip)" ]; then
+	echo "SKIP: Could not run test without ip tool"
+	exit $ksft_skip
+fi
+
+cleanup &>/dev/null
+
+setup
+
+host_tests
+router_netfilter_tests
+
+print_log_test_results
+
+cleanup &>/dev/null
+
+exit ${ret}
diff --git a/tools/testing/selftests/net/srv6_end_dx6_netfilter_test.sh b/tools/testing/selftests/net/srv6_end_dx6_netfilter_test.sh
new file mode 100755
index 000000000000..9e69a2ed5bc3
--- /dev/null
+++ b/tools/testing/selftests/net/srv6_end_dx6_netfilter_test.sh
@@ -0,0 +1,340 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# author: Jianguo Wu <wujianguo@chinatelecom.cn>
+#
+# Mostly copied from tools/testing/selftests/net/srv6_end_dt6_l3vpn_test.sh.
+#
+# This script is designed for testing the support of netfilter hooks for
+# SRv6 End.DX4 behavior.
+#
+# Hereafter a network diagram is shown, where one tenants (named 100) offer
+# IPv6 L3 VPN services allowing hosts to communicate with each other across
+# an IPv6 network.
+#
+# Routers rt-1 and rt-2 implement IPv6 L3 VPN services leveraging the SRv6
+# architecture. The key components for such VPNs are: a) SRv6 Encap behavior,
+# b) SRv6 End.DX4 behavior.
+#
+# To explain how an IPv6 L3 VPN based on SRv6 works, let us briefly consider an
+# example where, within the same domain of tenant 100, the host hs-1 pings
+# the host hs-2.
+#
+# First of all, L2 reachability of the host hs-2 is taken into account by
+# the router rt-1 which acts as an arp proxy.
+#
+# When the host hs-1 sends an IPv6 packet destined to hs-2, the router rt-1
+# receives the packet on the internal veth-t100 interface, rt-1 contains the
+# SRv6 Encap route for encapsulating the IPv6 packet in a IPv6 plus the Segment
+# Routing Header (SRH) packet. This packet is sent through the (IPv6) core
+# network up to the router rt-2 that receives it on veth0 interface.
+#
+# The rt-2 router uses the 'localsid' routing table to process incoming
+# IPv6+SRH packets which belong to the VPN of the tenant 100. For each of these
+# packets, the SRv6 End.DX4 behavior removes the outer IPv6+SRH headers and
+# routs the packet to the specified nexthop. Afterwards, the packet is sent to
+# the host hs-2 through the veth-t100 interface.
+#
+# The ping response follows the same processing but this time the role of rt-1
+# and rt-2 are swapped.
+#
+# And when net.netfilter.nf_hooks_lwtunnel is set to 1 in rt-1 or rt-2, and a
+# rpfilter iptables rule is added, SRv6 packets will go through netfilter PREROUTING
+# hooks.
+#
+#
+# +-------------------+                                   +-------------------+
+# |                   |                                   |                   |
+# |    hs-1 netns     |                                   |     hs-2 netns    |
+# |                   |                                   |                   |
+# |  +-------------+  |                                   |  +-------------+  |
+# |  |    veth0    |  |                                   |  |    veth0    |  |
+# |  | cafe::1/64  |  |                                   |  | cafe::2/64  |  |
+# |  +-------------+  |                                   |  +-------------+  |
+# |        .          |                                   |         .         |
+# +-------------------+                                   +-------------------+
+#          .                                                        .
+#          .                                                        .
+#          .                                                        .
+# +-----------------------------------+   +-----------------------------------+
+# |        .                          |   |                         .         |
+# | +---------------+                 |   |                 +---------------- |
+# | |   veth-t100   |                 |   |                 |   veth-t100   | |
+# | | cafe::11/64   |    +----------+ |   | +----------+    | cafe::22/64   | |
+# | +-------+-------+   |   route   | |   | |   route  |    +-------+-------- |
+# |                     |   table   | |   | |   table  |                      |
+# |                      +----------+ |   | +----------+                      |
+# |                  +--------------+ |   | +--------------+                  |
+# |                 |      veth0    | |   | |   veth0       |                 |
+# |                 | 2001:11::1/64 |.|...|.| 2001:11::2/64 |                 |
+# |                  +--------------+ |   | +--------------+                  |
+# |                                   |   |                                   |
+# |                        rt-1 netns |   | rt-2 netns                        |
+# |                                   |   |                                   |
+# +-----------------------------------+   +-----------------------------------+
+#
+# ~~~~~~~~~~~~~~~~~~~~~~~~~
+# | Network configuration |
+# ~~~~~~~~~~~~~~~~~~~~~~~~~
+#
+# rt-1: localsid table
+# +----------------------------------------------------------------+
+# |SID              |Action                                        |
+# +----------------------------------------------------------------+
+# |fc00:21:100::6004|apply SRv6 End.DX6 nh6 cafe::1 dev veth-t100  |
+# +----------------------------------------------------------------+
+#
+# rt-1: route table
+# +---------------------------------------------------+
+# |host       |Action                                 |
+# +---------------------------------------------------+
+# |cafe::2    |apply seg6 encap segs fc00:12:100::6004|
+# +---------------------------------------------------+
+# |cafe::/64  |forward to dev veth_t100               |
+# +---------------------------------------------------+
+#
+#
+# rt-2: localsid table
+# +---------------------------------------------------------------+
+# |SID              |Action                                       |
+# +---------------------------------------------------------------+
+# |fc00:12:100::6004|apply SRv6 End.DX6 nh6 cafe::2 dev veth-t100 |
+# +---------------------------------------------------------------+
+#
+# rt-2: route table
+# +---------------------------------------------------+
+# |host       |Action                                 |
+# +---------------------------------------------------+
+# |cafe::1    |apply seg6 encap segs fc00:21:100::6004|
+# +---------------------------------------------------+
+# |cafe::/64  |forward to dev veth_t100               |
+# +---------------------------------------------------+
+#
+
+# Kselftest framework requirement - SKIP code is 4.
+ksft_skip=4
+
+readonly IPv6_RT_NETWORK=2001:11
+readonly IPv6_HS_NETWORK=cafe
+readonly SID_LOCATOR=fc00
+
+PING_TIMEOUT_SEC=4
+
+ret=0
+
+PAUSE_ON_FAIL=${PAUSE_ON_FAIL:=no}
+
+log_test()
+{
+	local rc=$1
+	local expected=$2
+	local msg="$3"
+
+	if [ ${rc} -eq ${expected} ]; then
+		nsuccess=$((nsuccess+1))
+		printf "\n    TEST: %-60s  [ OK ]\n" "${msg}"
+	else
+		ret=1
+		nfail=$((nfail+1))
+		printf "\n    TEST: %-60s  [FAIL]\n" "${msg}"
+		if [ "${PAUSE_ON_FAIL}" = "yes" ]; then
+			echo
+			echo "hit enter to continue, 'q' to quit"
+			read a
+			[ "$a" = "q" ] && exit 1
+		fi
+	fi
+}
+
+print_log_test_results()
+{
+	if [ "$TESTS" != "none" ]; then
+		printf "\nTests passed: %3d\n" ${nsuccess}
+		printf "Tests failed: %3d\n"   ${nfail}
+	fi
+}
+
+log_section()
+{
+	echo
+	echo "################################################################################"
+	echo "TEST SECTION: $*"
+	echo "################################################################################"
+}
+
+cleanup()
+{
+	ip link del veth-rt-1 2>/dev/null || true
+	ip link del veth-rt-2 2>/dev/null || true
+
+	# destroy routers rt-* and hosts hs-*
+	for ns in $(ip netns show | grep -E 'rt-*|hs-*'); do
+		ip netns del ${ns} || true
+	done
+}
+
+# Setup the basic networking for the routers
+setup_rt_networking()
+{
+	local rt=$1
+	local nsname=rt-${rt}
+
+	ip netns add ${nsname}
+
+	ip netns exec ${nsname} sysctl -wq net.ipv6.conf.all.accept_dad=0
+	ip netns exec ${nsname} sysctl -wq net.ipv6.conf.default.accept_dad=0
+
+	ip link set veth-rt-${rt} netns ${nsname}
+	ip -netns ${nsname} link set veth-rt-${rt} name veth0
+
+	ip -netns ${nsname} addr add ${IPv6_RT_NETWORK}::${rt}/64 dev veth0 nodad
+	ip -netns ${nsname} link set veth0 up
+	ip -netns ${nsname} link set lo up
+
+	ip netns exec ${nsname} sysctl -wq net.ipv6.conf.all.forwarding=1
+}
+
+setup_rt_netfilter()
+{
+	local rt=$1
+	local nsname=rt-${rt}
+
+	ip netns exec ${nsname} sysctl -wq net.netfilter.nf_hooks_lwtunnel=1
+	ip netns exec ${nsname} ip6tables -t raw -A PREROUTING -m rpfilter --invert -j DROP
+}
+
+setup_hs()
+{
+	local hs=$1
+	local rt=$2
+	local tid=$3
+	local hsname=hs-${hs}
+	local rtname=rt-${rt}
+	local rtveth=veth-t${tid}
+
+	# set the networking for the host
+	ip netns add ${hsname}
+
+	ip -netns ${hsname} link add veth0 type veth peer name ${rtveth}
+	ip -netns ${hsname} link set ${rtveth} netns ${rtname}
+	ip -netns ${hsname} addr add ${IPv6_HS_NETWORK}::${hs}/64 dev veth0 nodad
+	ip -netns ${hsname} link set veth0 up
+	ip -netns ${hsname} link set lo up
+
+	ip -netns ${rtname} addr add ${IPv6_HS_NETWORK}::${rt}${hs}/64 dev ${rtveth}
+	ip -netns ${rtname} link set ${rtveth} up
+
+	ip netns exec ${rtname} sysctl -wq net.ipv6.conf.all.accept_dad=0
+	ip netns exec ${rtname} sysctl -wq net.ipv6.conf.default.accept_dad=0
+
+	ip netns exec ${rtname} sysctl -wq net.ipv6.conf.${rtveth}.proxy_ndp=1
+}
+
+setup_vpn_config()
+{
+	local hssrc=$1
+	local rtsrc=$2
+	local hsdst=$3
+	local rtdst=$4
+	local tid=$5
+
+	local hssrc_name=hs-t${tid}-${hssrc}
+	local hsdst_name=hs-t${tid}-${hsdst}
+	local rtsrc_name=rt-${rtsrc}
+	local rtdst_name=rt-${rtdst}
+	local rtveth=veth-t${tid}
+	local vpn_sid=${SID_LOCATOR}:${hssrc}${hsdst}:${tid}::6004
+
+	ip -netns ${rtsrc_name} -6 neigh add proxy ${IPv6_HS_NETWORK}::${hsdst} dev ${rtveth}
+
+	# set the encap route for encapsulating packets which arrive from the
+	# host hssrc and destined to the access router rtsrc.
+	ip -netns ${rtsrc_name} -6 route add ${IPv6_HS_NETWORK}::${hsdst}/128 \
+		encap seg6 mode encap segs ${vpn_sid} dev veth0
+	ip -netns ${rtsrc_name} -6 route add ${vpn_sid}/128 \
+		via 2001:11::${rtdst} dev veth0
+
+	# set the decap route for decapsulating packets which arrive from
+	# the rtdst router and destined to the hsdst host.
+	ip -netns ${rtdst_name} -6 route add ${vpn_sid}/128 \
+		encap seg6local action End.DX6 nh6 ${IPv6_HS_NETWORK}::${hsdst} dev veth-t${tid}
+}
+
+setup()
+{
+	ip link add veth-rt-1 type veth peer name veth-rt-2
+	# setup the networking for router rt-1 and router rt-2
+	setup_rt_networking 1
+	setup_rt_networking 2
+
+	# setup two hosts for the tenant 100.
+	#  - host hs-1 is directly connected to the router rt-1;
+	#  - host hs-2 is directly connected to the router rt-2.
+	setup_hs 1 1 100
+	setup_hs 2 2 100
+
+	# setup the IPv4 L3 VPN which connects the host hs-1 and host hs-2.
+	setup_vpn_config 1 1 2 2 100  #args: src_host src_router dst_host dst_router tenant
+	setup_vpn_config 2 2 1 1 100
+}
+
+check_hs_connectivity()
+{
+	local hssrc=$1
+	local hsdst=$2
+	local tid=$3
+
+	ip netns exec hs-${hssrc} ping -6 -c 1 -W ${PING_TIMEOUT_SEC} \
+		${IPv6_HS_NETWORK}::${hsdst} >/dev/null 2>&1
+}
+
+check_and_log_hs_connectivity()
+{
+	local hssrc=$1
+	local hsdst=$2
+	local tid=$3
+
+	check_hs_connectivity ${hssrc} ${hsdst} ${tid}
+	log_test $? 0 "Hosts connectivity: hs-${hssrc} -> hs-${hsdst} (tenant ${tid})"
+}
+
+host_tests()
+{
+	log_section "SRv6 VPN connectivity test among hosts in the same tenant"
+
+	check_and_log_hs_connectivity 1 2 100
+	check_and_log_hs_connectivity 2 1 100
+}
+
+router_netfilter_tests()
+{
+	log_section "SRv6 VPN connectivity test with netfilter enabled in routers"
+	setup_rt_netfilter 1
+	setup_rt_netfilter 2
+
+	check_and_log_hs_connectivity 1 2 100
+	check_and_log_hs_connectivity 2 1 100
+}
+
+if [ "$(id -u)" -ne 0 ];then
+	echo "SKIP: Need root privileges"
+	exit $ksft_skip
+fi
+
+if [ ! -x "$(command -v ip)" ]; then
+	echo "SKIP: Could not run test without ip tool"
+	exit $ksft_skip
+fi
+
+cleanup &>/dev/null
+
+setup
+
+host_tests
+router_netfilter_tests
+
+print_log_test_results
+
+cleanup &>/dev/null
+
+exit ${ret}