Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next

Pablo Neira Ayuso says:

====================
Netfilter/IPVS updates for net-next

The following patchset contains Netfilter/IPVS updates for net-next,
more specifically:

* Updates for ipset:

1) Coding style fix for ipset comment extension, from Jeremy Sowden.

2) De-inline many functions in ipset, from Jeremy Sowden.

3) Move ipset function definition from header to source file.

4) Move ip_set_put_flags() to source, export it as a symbol, remove
   inline.

5) Move range_to_mask() to the source file where this is used.

6) Move ip_set_get_ip_port() to the source file where this is used.

* IPVS selftests and netns improvements:

7) Two patches to speedup ipvs netns dismantle, from Haishuang Yan.

8) Three patches to add selftest script for ipvs, also from
   Haishuang Yan.

* Conntrack updates and new nf_hook_slow_list() function:

9) Document ct ecache extension, from Florian Westphal.

10) Skip ct extensions from ctnetlink dump, from Florian.

11) Free ct extension immediately, from Florian.

12) Skip access to ecache extension from nf_ct_deliver_cached_events()
    this is not correct as reported by Syzbot.

13) Add and use nf_hook_slow_list(), from Florian.

* Flowtable infrastructure updates:

14) Move priority to nf_flowtable definition.

15) Dynamic allocation of per-device hooks in flowtables.

16) Allow to include netdevice only once in flowtable definitions.

17) Rise maximum number of devices per flowtable.

* Netfilter hardware offload infrastructure updates:

18) Add nft_flow_block_chain() helper function.

19) Pass callback list to nft_setup_cb_call().

20) Add nft_flow_cls_offload_setup() helper function.

21) Remove rules for the unregistered device via netdevice event.

22) Support for multiple devices in a basechain definition at the
    ingress hook.

22) Add nft_chain_offload_cmd() helper function.

23) Add nft_flow_block_offload_init() helper function.

24) Rewind in case of failing to bind multiple devices to hook.

25) Typo in IPv6 tproxy module description, from Norman Rasmussen.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

2 files changed, 229 insertions, 1 deletions

diff --git a/tools/testing/selftests/netfilter/Makefile b/tools/testing/selftests/netfilter/Makefile
index 4144984ebee5..de1032b5ddea 100644
--- a/tools/testing/selftests/netfilter/Makefile
+++ b/tools/testing/selftests/netfilter/Makefile
@@ -2,6 +2,6 @@
 # Makefile for netfilter selftests
 
 TEST_PROGS := nft_trans_stress.sh nft_nat.sh bridge_brouter.sh \
-	conntrack_icmp_related.sh nft_flowtable.sh
+	conntrack_icmp_related.sh nft_flowtable.sh ipvs.sh
 
 include ../lib.mk
diff --git a/tools/testing/selftests/netfilter/ipvs.sh b/tools/testing/selftests/netfilter/ipvs.sh
new file mode 100755
index 000000000000..c3b8f90c497e
--- /dev/null
+++ b/tools/testing/selftests/netfilter/ipvs.sh
@@ -0,0 +1,228 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0
+#
+# End-to-end ipvs test suite
+# Topology:
+#--------------------------------------------------------------+
+#                      |                                       |
+#         ns0          |         ns1                           |
+#      -----------     |     -----------    -----------        |
+#      | veth01  | --------- | veth10  |    | veth12  |        |
+#      -----------    peer   -----------    -----------        |
+#           |          |                        |              |
+#      -----------     |                        |              |
+#      |  br0    |     |-----------------  peer |--------------|
+#      -----------     |                        |              |
+#           |          |                        |              |
+#      ----------     peer   ----------      -----------       |
+#      |  veth02 | --------- |  veth20 |     | veth21  |       |
+#      ----------      |     ----------      -----------       |
+#                      |         ns2                           |
+#                      |                                       |
+#--------------------------------------------------------------+
+#
+# We assume that all network driver are loaded
+#
+
+# Kselftest framework requirement - SKIP code is 4.
+ksft_skip=4
+ret=0
+GREEN='\033[0;92m'
+RED='\033[0;31m'
+NC='\033[0m' # No Color
+
+readonly port=8080
+
+readonly vip_v4=207.175.44.110
+readonly cip_v4=10.0.0.2
+readonly gip_v4=10.0.0.1
+readonly dip_v4=172.16.0.1
+readonly rip_v4=172.16.0.2
+readonly sip_v4=10.0.0.3
+
+readonly infile="$(mktemp)"
+readonly outfile="$(mktemp)"
+readonly datalen=32
+
+sysipvsnet="/proc/sys/net/ipv4/vs/"
+if [ ! -d $sysipvsnet ]; then
+	modprobe -q ip_vs
+	if [ $? -ne 0 ]; then
+		echo "skip: could not run test without ipvs module"
+		exit $ksft_skip
+	fi
+fi
+
+ip -Version > /dev/null 2>&1
+if [ $? -ne 0 ]; then
+	echo "SKIP: Could not run test without ip tool"
+	exit $ksft_skip
+fi
+
+ipvsadm -v > /dev/null 2>&1
+if [ $? -ne 0 ]; then
+	echo "SKIP: Could not run test without ipvsadm"
+	exit $ksft_skip
+fi
+
+setup() {
+	ip netns add ns0
+	ip netns add ns1
+	ip netns add ns2
+
+	ip link add veth01 netns ns0 type veth peer name veth10 netns ns1
+	ip link add veth02 netns ns0 type veth peer name veth20 netns ns2
+	ip link add veth12 netns ns1 type veth peer name veth21 netns ns2
+
+	ip netns exec ns0 ip link set veth01 up
+	ip netns exec ns0 ip link set veth02 up
+	ip netns exec ns0 ip link add br0 type bridge
+	ip netns exec ns0 ip link set veth01 master br0
+	ip netns exec ns0 ip link set veth02 master br0
+	ip netns exec ns0 ip link set br0 up
+	ip netns exec ns0 ip addr add ${cip_v4}/24 dev br0
+
+	ip netns exec ns1 ip link set lo up
+	ip netns exec ns1 ip link set veth10 up
+	ip netns exec ns1 ip addr add ${gip_v4}/24 dev veth10
+	ip netns exec ns1 ip link set veth12 up
+	ip netns exec ns1 ip addr add ${dip_v4}/24 dev veth12
+
+	ip netns exec ns2 ip link set lo up
+	ip netns exec ns2 ip link set veth21 up
+	ip netns exec ns2 ip addr add ${rip_v4}/24 dev veth21
+	ip netns exec ns2 ip link set veth20 up
+	ip netns exec ns2 ip addr add ${sip_v4}/24 dev veth20
+
+	sleep 1
+
+	dd if=/dev/urandom of="${infile}" bs="${datalen}" count=1 status=none
+}
+
+cleanup() {
+	for i in 0 1 2
+	do
+		ip netns del ns$i > /dev/null 2>&1
+	done
+
+	if [ -f "${outfile}" ]; then
+		rm "${outfile}"
+	fi
+	if [ -f "${infile}" ]; then
+		rm "${infile}"
+	fi
+}
+
+server_listen() {
+	ip netns exec ns2 nc -l -p 8080 > "${outfile}" &
+	server_pid=$!
+	sleep 0.2
+}
+
+client_connect() {
+	ip netns exec ns0 timeout 2 nc -w 1 ${vip_v4} ${port} < "${infile}"
+}
+
+verify_data() {
+	wait "${server_pid}"
+	cmp "$infile" "$outfile" 2>/dev/null
+}
+
+test_service() {
+	server_listen
+	client_connect
+	verify_data
+}
+
+
+test_dr() {
+	ip netns exec ns0 ip route add ${vip_v4} via ${gip_v4} dev br0
+
+	ip netns exec ns1 sysctl -qw net.ipv4.ip_forward=1
+	ip netns exec ns1 ipvsadm -A -t ${vip_v4}:${port} -s rr
+	ip netns exec ns1 ipvsadm -a -t ${vip_v4}:${port} -r ${rip_v4}:${port}
+	ip netns exec ns1 ip addr add ${vip_v4}/32 dev lo:1
+
+	# avoid incorrect arp response
+	ip netns exec ns2 sysctl -qw net.ipv4.conf.all.arp_ignore=1
+	ip netns exec ns2 sysctl -qw net.ipv4.conf.all.arp_announce=2
+	# avoid reverse route lookup
+	ip netns exec ns2 sysctl -qw  net.ipv4.conf.all.rp_filter=0
+	ip netns exec ns2 sysctl -qw  net.ipv4.conf.veth21.rp_filter=0
+	ip netns exec ns2 ip addr add ${vip_v4}/32 dev lo:1
+
+	test_service
+}
+
+test_nat() {
+	ip netns exec ns0 ip route add ${vip_v4} via ${gip_v4} dev br0
+
+	ip netns exec ns1 sysctl -qw net.ipv4.ip_forward=1
+	ip netns exec ns1 ipvsadm -A -t ${vip_v4}:${port} -s rr
+	ip netns exec ns1 ipvsadm -a -m -t ${vip_v4}:${port} -r ${rip_v4}:${port}
+	ip netns exec ns1 ip addr add ${vip_v4}/32 dev lo:1
+
+	ip netns exec ns2 ip link del veth20
+	ip netns exec ns2 ip route add default via ${dip_v4} dev veth21
+
+	test_service
+}
+
+test_tun() {
+	ip netns exec ns0 ip route add ${vip_v4} via ${gip_v4} dev br0
+
+	ip netns exec ns1 modprobe ipip
+	ip netns exec ns1 ip link set tunl0 up
+	ip netns exec ns1 sysctl -qw net.ipv4.ip_forward=0
+	ip netns exec ns1 sysctl -qw net.ipv4.conf.all.send_redirects=0
+	ip netns exec ns1 sysctl -qw net.ipv4.conf.default.send_redirects=0
+	ip netns exec ns1 ipvsadm -A -t ${vip_v4}:${port} -s rr
+	ip netns exec ns1 ipvsadm -a -i -t ${vip_v4}:${port} -r ${rip_v4}:${port}
+	ip netns exec ns1 ip addr add ${vip_v4}/32 dev lo:1
+
+	ip netns exec ns2 modprobe ipip
+	ip netns exec ns2 ip link set tunl0 up
+	ip netns exec ns2 sysctl -qw net.ipv4.conf.all.arp_ignore=1
+	ip netns exec ns2 sysctl -qw net.ipv4.conf.all.arp_announce=2
+	ip netns exec ns2 sysctl -qw net.ipv4.conf.all.rp_filter=0
+	ip netns exec ns2 sysctl -qw net.ipv4.conf.tunl0.rp_filter=0
+	ip netns exec ns2 sysctl -qw net.ipv4.conf.veth21.rp_filter=0
+	ip netns exec ns2 ip addr add ${vip_v4}/32 dev lo:1
+
+	test_service
+}
+
+run_tests() {
+	local errors=
+
+	echo "Testing DR mode..."
+	cleanup
+	setup
+	test_dr
+	errors=$(( $errors + $? ))
+
+	echo "Testing NAT mode..."
+	cleanup
+	setup
+	test_nat
+	errors=$(( $errors + $? ))
+
+	echo "Testing Tunnel mode..."
+	cleanup
+	setup
+	test_tun
+	errors=$(( $errors + $? ))
+
+	return $errors
+}
+
+trap cleanup EXIT
+
+run_tests
+
+if [ $? -ne 0 ]; then
+	echo -e "$(basename $0): ${RED}FAIL${NC}"
+	exit 1
+fi
+echo -e "$(basename $0): ${GREEN}PASS${NC}"
+exit 0