Merge tag 'net-6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from Paolo Abeni:
 "Including fixes from netfilter and bpf.

  Current release - regressions:

   - bpf: adjust size_index according to the value of KMALLOC_MIN_SIZE

   - netfilter: fix entries val in rule reset audit log

   - eth: stmmac: fix incorrect rxq|txq_stats reference

  Previous releases - regressions:

   - ipv4: fix null-deref in ipv4_link_failure

   - netfilter:
      - fix several GC related issues
      - fix race between IPSET_CMD_CREATE and IPSET_CMD_SWAP

   - eth: team: fix null-ptr-deref when team device type is changed

   - eth: i40e: fix VF VLAN offloading when port VLAN is configured

   - eth: ionic: fix 16bit math issue when PAGE_SIZE >= 64KB

  Previous releases - always broken:

   - core: fix ETH_P_1588 flow dissector

   - mptcp: fix several connection hang-up conditions

   - bpf:
      - avoid deadlock when using queue and stack maps from NMI
      - add override check to kprobe multi link attach

   - hsr: properly parse HSRv1 supervisor frames.

   - eth: igc: fix infinite initialization loop with early XDP redirect

   - eth: octeon_ep: fix tx dma unmap len values in SG

   - eth: hns3: fix GRE checksum offload issue"

* tag 'net-6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (87 commits)
  sfc: handle error pointers returned by rhashtable_lookup_get_insert_fast()
  igc: Expose tx-usecs coalesce setting to user
  octeontx2-pf: Do xdp_do_flush() after redirects.
  bnxt_en: Flush XDP for bnxt_poll_nitroa0()'s NAPI
  net: ena: Flush XDP packets on error.
  net/handshake: Fix memory leak in __sock_create() and sock_alloc_file()
  net: hinic: Fix warning-hinic_set_vlan_fliter() warn: variable dereferenced before check 'hwdev'
  netfilter: ipset: Fix race between IPSET_CMD_CREATE and IPSET_CMD_SWAP
  netfilter: nf_tables: fix memleak when more than 255 elements expired
  netfilter: nf_tables: disable toggling dormant table state more than once
  vxlan: Add missing entries to vxlan_get_size()
  net: rds: Fix possible NULL-pointer dereference
  team: fix null-ptr-deref when team device type is changed
  net: bridge: use DEV_STATS_INC()
  net: hns3: add 5ms delay before clear firmware reset irq source
  net: hns3: fix fail to delete tc flower rules during reset issue
  net: hns3: only enable unicast promisc when mac table full
  net: hns3: fix GRE checksum offload issue
  net: hns3: add cmdq check for vf periodic service task
  net: stmmac: fix incorrect rxq|txq_stats reference
  ...

19 files changed, 726 insertions, 143 deletions

diff --git a/tools/include/linux/btf_ids.h b/tools/include/linux/btf_ids.h
index 71e54b1e3796..2f882d5cb30f 100644
--- a/tools/include/linux/btf_ids.h
+++ b/tools/include/linux/btf_ids.h
@@ -38,7 +38,7 @@ asm(							\
 	____BTF_ID(symbol)
 
 #define __ID(prefix) \
-	__PASTE(prefix, __COUNTER__)
+	__PASTE(__PASTE(prefix, __COUNTER__), __LINE__)
 
 /*
  * The BTF_ID defines unique symbol for each ID pointing
diff --git a/tools/include/uapi/linux/bpf.h b/tools/include/uapi/linux/bpf.h
index 8790b3962e4b..0448700890f7 100644
--- a/tools/include/uapi/linux/bpf.h
+++ b/tools/include/uapi/linux/bpf.h
@@ -1962,7 +1962,9 @@ union bpf_attr {
  * 		performed again, if the helper is used in combination with
  * 		direct packet access.
  * 	Return
- * 		0 on success, or a negative error in case of failure.
+ * 		0 on success, or a negative error in case of failure. Positive
+ * 		error indicates a potential drop or congestion in the target
+ * 		device. The particular positive error codes are not defined.
  *
  * u64 bpf_get_current_pid_tgid(void)
  * 	Description
diff --git a/tools/testing/selftests/bpf/DENYLIST.aarch64 b/tools/testing/selftests/bpf/DENYLIST.aarch64
index 7f768d335698..3babaf3eee5c 100644
--- a/tools/testing/selftests/bpf/DENYLIST.aarch64
+++ b/tools/testing/selftests/bpf/DENYLIST.aarch64
@@ -1,14 +1,8 @@
 bpf_cookie/multi_kprobe_attach_api               # kprobe_multi_link_api_subtest:FAIL:fentry_raw_skel_load unexpected error: -3
 bpf_cookie/multi_kprobe_link_api                 # kprobe_multi_link_api_subtest:FAIL:fentry_raw_skel_load unexpected error: -3
 fexit_sleep                                      # The test never returns. The remaining tests cannot start.
-kprobe_multi_bench_attach                        # bpf_program__attach_kprobe_multi_opts unexpected error: -95
-kprobe_multi_test/attach_api_addrs               # bpf_program__attach_kprobe_multi_opts unexpected error: -95
-kprobe_multi_test/attach_api_pattern             # bpf_program__attach_kprobe_multi_opts unexpected error: -95
-kprobe_multi_test/attach_api_syms                # bpf_program__attach_kprobe_multi_opts unexpected error: -95
-kprobe_multi_test/bench_attach                   # bpf_program__attach_kprobe_multi_opts unexpected error: -95
-kprobe_multi_test/link_api_addrs                 # link_fd unexpected link_fd: actual -95 < expected 0
-kprobe_multi_test/link_api_syms                  # link_fd unexpected link_fd: actual -95 < expected 0
-kprobe_multi_test/skel_api                       # libbpf: failed to load BPF skeleton 'kprobe_multi': -3
+kprobe_multi_bench_attach                        # needs CONFIG_FPROBE
+kprobe_multi_test                                # needs CONFIG_FPROBE
 module_attach                                    # prog 'kprobe_multi': failed to auto-attach: -95
 fentry_test/fentry_many_args                     # fentry_many_args:FAIL:fentry_many_args_attach unexpected error: -524
 fexit_test/fexit_many_args                       # fexit_many_args:FAIL:fexit_many_args_attach unexpected error: -524
diff --git a/tools/testing/selftests/bpf/config b/tools/testing/selftests/bpf/config
index 1c7584e8dd9e..e41eb33b2704 100644
--- a/tools/testing/selftests/bpf/config
+++ b/tools/testing/selftests/bpf/config
@@ -4,6 +4,7 @@ CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
 CONFIG_BPF=y
 CONFIG_BPF_EVENTS=y
 CONFIG_BPF_JIT=y
+CONFIG_BPF_KPROBE_OVERRIDE=y
 CONFIG_BPF_LIRC_MODE2=y
 CONFIG_BPF_LSM=y
 CONFIG_BPF_STREAM_PARSER=y
diff --git a/tools/testing/selftests/bpf/config.x86_64 b/tools/testing/selftests/bpf/config.x86_64
index b650b2e617b8..2e70a6048278 100644
--- a/tools/testing/selftests/bpf/config.x86_64
+++ b/tools/testing/selftests/bpf/config.x86_64
@@ -20,7 +20,6 @@ CONFIG_BLK_DEV_THROTTLING=y
 CONFIG_BONDING=y
 CONFIG_BOOTTIME_TRACING=y
 CONFIG_BPF_JIT_ALWAYS_ON=y
-CONFIG_BPF_KPROBE_OVERRIDE=y
 CONFIG_BPF_PRELOAD=y
 CONFIG_BPF_PRELOAD_UMD=y
 CONFIG_BPFILTER=y
diff --git a/tools/testing/selftests/bpf/prog_tests/empty_skb.c b/tools/testing/selftests/bpf/prog_tests/empty_skb.c
index 3b77d8a422db..261228eb68e8 100644
--- a/tools/testing/selftests/bpf/prog_tests/empty_skb.c
+++ b/tools/testing/selftests/bpf/prog_tests/empty_skb.c
@@ -24,6 +24,7 @@ void test_empty_skb(void)
 		int *ifindex;
 		int err;
 		int ret;
+		int lwt_egress_ret; /* expected retval at lwt/egress */
 		bool success_on_tc;
 	} tests[] = {
 		/* Empty packets are always rejected. */
@@ -57,6 +58,7 @@ void test_empty_skb(void)
 			.data_size_in = sizeof(eth_hlen),
 			.ifindex = &veth_ifindex,
 			.ret = -ERANGE,
+			.lwt_egress_ret = -ERANGE,
 			.success_on_tc = true,
 		},
 		{
@@ -70,6 +72,7 @@ void test_empty_skb(void)
 			.data_size_in = sizeof(eth_hlen),
 			.ifindex = &ipip_ifindex,
 			.ret = -ERANGE,
+			.lwt_egress_ret = -ERANGE,
 		},
 
 		/* ETH_HLEN+1-sized packet should be redirected. */
@@ -79,6 +82,7 @@ void test_empty_skb(void)
 			.data_in = eth_hlen_pp,
 			.data_size_in = sizeof(eth_hlen_pp),
 			.ifindex = &veth_ifindex,
+			.lwt_egress_ret = 1, /* veth_xmit NET_XMIT_DROP */
 		},
 		{
 			.msg = "ipip ETH_HLEN+1 packet ingress",
@@ -108,8 +112,12 @@ void test_empty_skb(void)
 
 	for (i = 0; i < ARRAY_SIZE(tests); i++) {
 		bpf_object__for_each_program(prog, bpf_obj->obj) {
-			char buf[128];
+			bool at_egress = strstr(bpf_program__name(prog), "egress") != NULL;
 			bool at_tc = !strncmp(bpf_program__section_name(prog), "tc", 2);
+			int expected_ret;
+			char buf[128];
+
+			expected_ret = at_egress && !at_tc ? tests[i].lwt_egress_ret : tests[i].ret;
 
 			tattr.data_in = tests[i].data_in;
 			tattr.data_size_in = tests[i].data_size_in;
@@ -128,7 +136,7 @@ void test_empty_skb(void)
 			if (at_tc && tests[i].success_on_tc)
 				ASSERT_GE(bpf_obj->bss->ret, 0, buf);
 			else
-				ASSERT_EQ(bpf_obj->bss->ret, tests[i].ret, buf);
+				ASSERT_EQ(bpf_obj->bss->ret, expected_ret, buf);
 		}
 	}
 
diff --git a/tools/testing/selftests/bpf/prog_tests/kprobe_multi_test.c b/tools/testing/selftests/bpf/prog_tests/kprobe_multi_test.c
index 179fe300534f..4041cfa670eb 100644
--- a/tools/testing/selftests/bpf/prog_tests/kprobe_multi_test.c
+++ b/tools/testing/selftests/bpf/prog_tests/kprobe_multi_test.c
@@ -3,6 +3,7 @@
 #include "kprobe_multi.skel.h"
 #include "trace_helpers.h"
 #include "kprobe_multi_empty.skel.h"
+#include "kprobe_multi_override.skel.h"
 #include "bpf/libbpf_internal.h"
 #include "bpf/hashmap.h"
 
@@ -453,6 +454,40 @@ cleanup:
 	}
 }
 
+static void test_attach_override(void)
+{
+	struct kprobe_multi_override *skel = NULL;
+	struct bpf_link *link = NULL;
+
+	skel = kprobe_multi_override__open_and_load();
+	if (!ASSERT_OK_PTR(skel, "kprobe_multi_empty__open_and_load"))
+		goto cleanup;
+
+	/* The test_override calls bpf_override_return so it should fail
+	 * to attach to bpf_fentry_test1 function, which is not on error
+	 * injection list.
+	 */
+	link = bpf_program__attach_kprobe_multi_opts(skel->progs.test_override,
+						     "bpf_fentry_test1", NULL);
+	if (!ASSERT_ERR_PTR(link, "override_attached_bpf_fentry_test1")) {
+		bpf_link__destroy(link);
+		goto cleanup;
+	}
+
+	/* The should_fail_bio function is on error injection list,
+	 * attach should succeed.
+	 */
+	link = bpf_program__attach_kprobe_multi_opts(skel->progs.test_override,
+						     "should_fail_bio", NULL);
+	if (!ASSERT_OK_PTR(link, "override_attached_should_fail_bio"))
+		goto cleanup;
+
+	bpf_link__destroy(link);
+
+cleanup:
+	kprobe_multi_override__destroy(skel);
+}
+
 void serial_test_kprobe_multi_bench_attach(void)
 {
 	if (test__start_subtest("kernel"))
@@ -480,4 +515,6 @@ void test_kprobe_multi_test(void)
 		test_attach_api_syms();
 	if (test__start_subtest("attach_api_fails"))
 		test_attach_api_fails();
+	if (test__start_subtest("attach_override"))
+		test_attach_override();
 }
diff --git a/tools/testing/selftests/bpf/prog_tests/test_bpf_ma.c b/tools/testing/selftests/bpf/prog_tests/test_bpf_ma.c
new file mode 100644
index 000000000000..0cca4e8ae38e
--- /dev/null
+++ b/tools/testing/selftests/bpf/prog_tests/test_bpf_ma.c
@@ -0,0 +1,50 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (C) 2023. Huawei Technologies Co., Ltd */
+#define _GNU_SOURCE
+#include <sched.h>
+#include <pthread.h>
+#include <stdbool.h>
+#include <bpf/btf.h>
+#include <test_progs.h>
+
+#include "test_bpf_ma.skel.h"
+
+void test_test_bpf_ma(void)
+{
+	struct test_bpf_ma *skel;
+	struct btf *btf;
+	int i, err;
+
+	skel = test_bpf_ma__open();
+	if (!ASSERT_OK_PTR(skel, "open"))
+		return;
+
+	btf = bpf_object__btf(skel->obj);
+	if (!ASSERT_OK_PTR(btf, "btf"))
+		goto out;
+
+	for (i = 0; i < ARRAY_SIZE(skel->rodata->data_sizes); i++) {
+		char name[32];
+		int id;
+
+		snprintf(name, sizeof(name), "bin_data_%u", skel->rodata->data_sizes[i]);
+		id = btf__find_by_name_kind(btf, name, BTF_KIND_STRUCT);
+		if (!ASSERT_GT(id, 0, "bin_data"))
+			goto out;
+		skel->rodata->data_btf_ids[i] = id;
+	}
+
+	err = test_bpf_ma__load(skel);
+	if (!ASSERT_OK(err, "load"))
+		goto out;
+
+	err = test_bpf_ma__attach(skel);
+	if (!ASSERT_OK(err, "attach"))
+		goto out;
+
+	skel->bss->pid = getpid();
+	usleep(1);
+	ASSERT_OK(skel->bss->err, "test error");
+out:
+	test_bpf_ma__destroy(skel);
+}
diff --git a/tools/testing/selftests/bpf/prog_tests/xdp_dev_bound_only.c b/tools/testing/selftests/bpf/prog_tests/xdp_dev_bound_only.c
new file mode 100644
index 000000000000..7dd18c6d06c6
--- /dev/null
+++ b/tools/testing/selftests/bpf/prog_tests/xdp_dev_bound_only.c
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <net/if.h>
+#include <test_progs.h>
+#include <network_helpers.h>
+
+#define LOCAL_NETNS "xdp_dev_bound_only_netns"
+
+static int load_dummy_prog(char *name, __u32 ifindex, __u32 flags)
+{
+	struct bpf_insn insns[] = { BPF_MOV64_IMM(BPF_REG_0, 0), BPF_EXIT_INSN() };
+	LIBBPF_OPTS(bpf_prog_load_opts, opts);
+
+	opts.prog_flags = flags;
+	opts.prog_ifindex = ifindex;
+	return bpf_prog_load(BPF_PROG_TYPE_XDP, name, "GPL", insns, ARRAY_SIZE(insns), &opts);
+}
+
+/* A test case for bpf_offload_netdev->offload handling bug:
+ * - create a veth device (does not support offload);
+ * - create a device bound XDP program with BPF_F_XDP_DEV_BOUND_ONLY flag
+ *   (such programs are not offloaded);
+ * - create a device bound XDP program without flags (such programs are offloaded).
+ * This might lead to 'BUG: kernel NULL pointer dereference'.
+ */
+void test_xdp_dev_bound_only_offdev(void)
+{
+	struct nstoken *tok = NULL;
+	__u32 ifindex;
+	int fd1 = -1;
+	int fd2 = -1;
+
+	SYS(out, "ip netns add " LOCAL_NETNS);
+	tok = open_netns(LOCAL_NETNS);
+	if (!ASSERT_OK_PTR(tok, "open_netns"))
+		goto out;
+	SYS(out, "ip link add eth42 type veth");
+	ifindex = if_nametoindex("eth42");
+	if (!ASSERT_NEQ(ifindex, 0, "if_nametoindex")) {
+		perror("if_nametoindex");
+		goto out;
+	}
+	fd1 = load_dummy_prog("dummy1", ifindex, BPF_F_XDP_DEV_BOUND_ONLY);
+	if (!ASSERT_GE(fd1, 0, "load_dummy_prog #1")) {
+		perror("load_dummy_prog #1");
+		goto out;
+	}
+	/* Program with ifindex is considered offloaded, however veth
+	 * does not support offload => error should be reported.
+	 */
+	fd2 = load_dummy_prog("dummy2", ifindex, 0);
+	ASSERT_EQ(fd2, -EINVAL, "load_dummy_prog #2 (offloaded)");
+
+out:
+	close(fd1);
+	close(fd2);
+	close_netns(tok);
+	/* eth42 was added inside netns, removing the netns will
+	 * also remove eth42 veth pair.
+	 */
+	SYS_NOFAIL("ip netns del " LOCAL_NETNS);
+}
diff --git a/tools/testing/selftests/bpf/progs/kprobe_multi_override.c b/tools/testing/selftests/bpf/progs/kprobe_multi_override.c
new file mode 100644
index 000000000000..28f8487c9059
--- /dev/null
+++ b/tools/testing/selftests/bpf/progs/kprobe_multi_override.c
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/bpf.h>
+#include <bpf/bpf_helpers.h>
+#include <bpf/bpf_tracing.h>
+
+char _license[] SEC("license") = "GPL";
+
+SEC("kprobe.multi")
+int test_override(struct pt_regs *ctx)
+{
+	bpf_override_return(ctx, 123);
+	return 0;
+}
diff --git a/tools/testing/selftests/bpf/progs/test_bpf_ma.c b/tools/testing/selftests/bpf/progs/test_bpf_ma.c
new file mode 100644
index 000000000000..ecde41ae0fc8
--- /dev/null
+++ b/tools/testing/selftests/bpf/progs/test_bpf_ma.c
@@ -0,0 +1,123 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (C) 2023. Huawei Technologies Co., Ltd */
+#include <vmlinux.h>
+#include <bpf/bpf_tracing.h>
+#include <bpf/bpf_helpers.h>
+
+#include "bpf_experimental.h"
+#include "bpf_misc.h"
+
+#ifndef ARRAY_SIZE
+#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
+#endif
+
+struct generic_map_value {
+	void *data;
+};
+
+char _license[] SEC("license") = "GPL";
+
+const unsigned int data_sizes[] = {8, 16, 32, 64, 96, 128, 192, 256, 512, 1024, 2048, 4096};
+const volatile unsigned int data_btf_ids[ARRAY_SIZE(data_sizes)] = {};
+
+int err = 0;
+int pid = 0;
+
+#define DEFINE_ARRAY_WITH_KPTR(_size) \
+	struct bin_data_##_size { \
+		char data[_size - sizeof(void *)]; \
+	}; \
+	struct map_value_##_size { \
+		struct bin_data_##_size __kptr * data; \
+		/* To emit BTF info for bin_data_xx */ \
+		struct bin_data_##_size not_used; \
+	}; \
+	struct { \
+		__uint(type, BPF_MAP_TYPE_ARRAY); \
+		__type(key, int); \
+		__type(value, struct map_value_##_size); \
+		__uint(max_entries, 128); \
+	} array_##_size SEC(".maps");
+
+static __always_inline void batch_alloc_free(struct bpf_map *map, unsigned int batch,
+					     unsigned int idx)
+{
+	struct generic_map_value *value;
+	unsigned int i, key;
+	void *old, *new;
+
+	for (i = 0; i < batch; i++) {
+		key = i;
+		value = bpf_map_lookup_elem(map, &key);
+		if (!value) {
+			err = 1;
+			return;
+		}
+		new = bpf_obj_new_impl(data_btf_ids[idx], NULL);
+		if (!new) {
+			err = 2;
+			return;
+		}
+		old = bpf_kptr_xchg(&value->data, new);
+		if (old) {
+			bpf_obj_drop(old);
+			err = 3;
+			return;
+		}
+	}
+	for (i = 0; i < batch; i++) {
+		key = i;
+		value = bpf_map_lookup_elem(map, &key);
+		if (!value) {
+			err = 4;
+			return;
+		}
+		old = bpf_kptr_xchg(&value->data, NULL);
+		if (!old) {
+			err = 5;
+			return;
+		}
+		bpf_obj_drop(old);
+	}
+}
+
+#define CALL_BATCH_ALLOC_FREE(size, batch, idx) \
+	batch_alloc_free((struct bpf_map *)(&array_##size), batch, idx)
+
+DEFINE_ARRAY_WITH_KPTR(8);
+DEFINE_ARRAY_WITH_KPTR(16);
+DEFINE_ARRAY_WITH_KPTR(32);
+DEFINE_ARRAY_WITH_KPTR(64);
+DEFINE_ARRAY_WITH_KPTR(96);
+DEFINE_ARRAY_WITH_KPTR(128);
+DEFINE_ARRAY_WITH_KPTR(192);
+DEFINE_ARRAY_WITH_KPTR(256);
+DEFINE_ARRAY_WITH_KPTR(512);
+DEFINE_ARRAY_WITH_KPTR(1024);
+DEFINE_ARRAY_WITH_KPTR(2048);
+DEFINE_ARRAY_WITH_KPTR(4096);
+
+SEC("fentry/" SYS_PREFIX "sys_nanosleep")
+int test_bpf_mem_alloc_free(void *ctx)
+{
+	if ((u32)bpf_get_current_pid_tgid() != pid)
+		return 0;
+
+	/* Alloc 128 8-bytes objects in batch to trigger refilling,
+	 * then free 128 8-bytes objects in batch to trigger freeing.
+	 */
+	CALL_BATCH_ALLOC_FREE(8, 128, 0);
+	CALL_BATCH_ALLOC_FREE(16, 128, 1);
+	CALL_BATCH_ALLOC_FREE(32, 128, 2);
+	CALL_BATCH_ALLOC_FREE(64, 128, 3);
+	CALL_BATCH_ALLOC_FREE(96, 128, 4);
+	CALL_BATCH_ALLOC_FREE(128, 128, 5);
+	CALL_BATCH_ALLOC_FREE(192, 128, 6);
+	CALL_BATCH_ALLOC_FREE(256, 128, 7);
+	CALL_BATCH_ALLOC_FREE(512, 64, 8);
+	CALL_BATCH_ALLOC_FREE(1024, 32, 9);
+	CALL_BATCH_ALLOC_FREE(2048, 16, 10);
+	CALL_BATCH_ALLOC_FREE(4096, 8, 11);
+
+	return 0;
+}
diff --git a/tools/testing/selftests/bpf/test_verifier.c b/tools/testing/selftests/bpf/test_verifier.c
index 31f1c935cd07..98107e0452d3 100644
--- a/tools/testing/selftests/bpf/test_verifier.c
+++ b/tools/testing/selftests/bpf/test_verifier.c
@@ -1880,7 +1880,7 @@ int main(int argc, char **argv)
 		}
 	}
 
-	get_unpriv_disabled();
+	unpriv_disabled = get_unpriv_disabled();
 	if (unpriv && unpriv_disabled) {
 		printf("Cannot run as unprivileged user with sysctl %s.\n",
 		       UNPRIV_SYSCTL);
diff --git a/tools/testing/selftests/net/hsr/hsr_ping.sh b/tools/testing/selftests/net/hsr/hsr_ping.sh
index df9143538708..1c6457e54625 100755
--- a/tools/testing/selftests/net/hsr/hsr_ping.sh
+++ b/tools/testing/selftests/net/hsr/hsr_ping.sh
@@ -41,61 +41,6 @@ cleanup()
 	done
 }
 
-ip -Version > /dev/null 2>&1
-if [ $? -ne 0 ];then
-	echo "SKIP: Could not run test without ip tool"
-	exit $ksft_skip
-fi
-
-trap cleanup EXIT
-
-for i in "$ns1" "$ns2" "$ns3" ;do
-	ip netns add $i || exit $ksft_skip
-	ip -net $i link set lo up
-done
-
-echo "INFO: preparing interfaces."
-# Three HSR nodes. Each node has one link to each of its neighbour, two links in total.
-#
-#    ns1eth1 ----- ns2eth1
-#      hsr1         hsr2
-#    ns1eth2       ns2eth2
-#       |            |
-#    ns3eth1      ns3eth2
-#           \    /
-#            hsr3
-#
-# Interfaces
-ip link add ns1eth1 netns "$ns1" type veth peer name ns2eth1 netns "$ns2"
-ip link add ns1eth2 netns "$ns1" type veth peer name ns3eth1 netns "$ns3"
-ip link add ns3eth2 netns "$ns3" type veth peer name ns2eth2 netns "$ns2"
-
-# HSRv0.
-ip -net "$ns1" link add name hsr1 type hsr slave1 ns1eth1 slave2 ns1eth2 supervision 45 version 0 proto 0
-ip -net "$ns2" link add name hsr2 type hsr slave1 ns2eth1 slave2 ns2eth2 supervision 45 version 0 proto 0
-ip -net "$ns3" link add name hsr3 type hsr slave1 ns3eth1 slave2 ns3eth2 supervision 45 version 0 proto 0
-
-# IP for HSR
-ip -net "$ns1" addr add 100.64.0.1/24 dev hsr1
-ip -net "$ns1" addr add dead:beef:1::1/64 dev hsr1 nodad
-ip -net "$ns2" addr add 100.64.0.2/24 dev hsr2
-ip -net "$ns2" addr add dead:beef:1::2/64 dev hsr2 nodad
-ip -net "$ns3" addr add 100.64.0.3/24 dev hsr3
-ip -net "$ns3" addr add dead:beef:1::3/64 dev hsr3 nodad
-
-# All Links up
-ip -net "$ns1" link set ns1eth1 up
-ip -net "$ns1" link set ns1eth2 up
-ip -net "$ns1" link set hsr1 up
-
-ip -net "$ns2" link set ns2eth1 up
-ip -net "$ns2" link set ns2eth2 up
-ip -net "$ns2" link set hsr2 up
-
-ip -net "$ns3" link set ns3eth1 up
-ip -net "$ns3" link set ns3eth2 up
-ip -net "$ns3" link set hsr3 up
-
 # $1: IP address
 is_v6()
 {
@@ -164,93 +109,168 @@ stop_if_error()
 	fi
 }
 
-
-echo "INFO: Initial validation ping."
-# Each node has to be able each one.
-do_ping "$ns1" 100.64.0.2
-do_ping "$ns2" 100.64.0.1
-do_ping "$ns3" 100.64.0.1
-stop_if_error "Initial validation failed."
-
-do_ping "$ns1" 100.64.0.3
-do_ping "$ns2" 100.64.0.3
-do_ping "$ns3" 100.64.0.2
-
-do_ping "$ns1" dead:beef:1::2
-do_ping "$ns1" dead:beef:1::3
-do_ping "$ns2" dead:beef:1::1
-do_ping "$ns2" dead:beef:1::2
-do_ping "$ns3" dead:beef:1::1
-do_ping "$ns3" dead:beef:1::2
-
-stop_if_error "Initial validation failed."
+do_complete_ping_test()
+{
+	echo "INFO: Initial validation ping."
+	# Each node has to be able each one.
+	do_ping "$ns1" 100.64.0.2
+	do_ping "$ns2" 100.64.0.1
+	do_ping "$ns3" 100.64.0.1
+	stop_if_error "Initial validation failed."
+
+	do_ping "$ns1" 100.64.0.3
+	do_ping "$ns2" 100.64.0.3
+	do_ping "$ns3" 100.64.0.2
+
+	do_ping "$ns1" dead:beef:1::2
+	do_ping "$ns1" dead:beef:1::3
+	do_ping "$ns2" dead:beef:1::1
+	do_ping "$ns2" dead:beef:1::2
+	do_ping "$ns3" dead:beef:1::1
+	do_ping "$ns3" dead:beef:1::2
+
+	stop_if_error "Initial validation failed."
 
 # Wait until supervisor all supervision frames have been processed and the node
 # entries have been merged. Otherwise duplicate frames will be observed which is
 # valid at this stage.
-WAIT=5
-while [ ${WAIT} -gt 0 ]
-do
-	grep 00:00:00:00:00:00 /sys/kernel/debug/hsr/hsr*/node_table
-	if [ $? -ne 0 ]
-	then
-		break
-	fi
-	sleep 1
-	let WAIT = WAIT - 1
-done
+	WAIT=5
+	while [ ${WAIT} -gt 0 ]
+	do
+		grep 00:00:00:00:00:00 /sys/kernel/debug/hsr/hsr*/node_table
+		if [ $? -ne 0 ]
+		then
+			break
+		fi
+		sleep 1
+		let "WAIT = WAIT - 1"
+	done
 
 # Just a safety delay in case the above check didn't handle it.
-sleep 1
+	sleep 1
+
+	echo "INFO: Longer ping test."
+	do_ping_long "$ns1" 100.64.0.2
+	do_ping_long "$ns1" dead:beef:1::2
+	do_ping_long "$ns1" 100.64.0.3
+	do_ping_long "$ns1" dead:beef:1::3
 
-echo "INFO: Longer ping test."
-do_ping_long "$ns1" 100.64.0.2
-do_ping_long "$ns1" dead:beef:1::2
-do_ping_long "$ns1" 100.64.0.3
-do_ping_long "$ns1" dead:beef:1::3
+	stop_if_error "Longer ping test failed."
 
-stop_if_error "Longer ping test failed."
+	do_ping_long "$ns2" 100.64.0.1
+	do_ping_long "$ns2" dead:beef:1::1
+	do_ping_long "$ns2" 100.64.0.3
+	do_ping_long "$ns2" dead:beef:1::2
+	stop_if_error "Longer ping test failed."
 
-do_ping_long "$ns2" 100.64.0.1
-do_ping_long "$ns2" dead:beef:1::1
-do_ping_long "$ns2" 100.64.0.3
-do_ping_long "$ns2" dead:beef:1::2
-stop_if_error "Longer ping test failed."
+	do_ping_long "$ns3" 100.64.0.1
+	do_ping_long "$ns3" dead:beef:1::1
+	do_ping_long "$ns3" 100.64.0.2
+	do_ping_long "$ns3" dead:beef:1::2
+	stop_if_error "Longer ping test failed."
 
-do_ping_long "$ns3" 100.64.0.1
-do_ping_long "$ns3" dead:beef:1::1
-do_ping_long "$ns3" 100.64.0.2
-do_ping_long "$ns3" dead:beef:1::2
-stop_if_error "Longer ping test failed."
+	echo "INFO: Cutting one link."
+	do_ping_long "$ns1" 100.64.0.3 &
 
-echo "INFO: Cutting one link."
-do_ping_long "$ns1" 100.64.0.3 &
+	sleep 3
+	ip -net "$ns3" link set ns3eth1 down
+	wait
 
-sleep 3
-ip -net "$ns3" link set ns3eth1 down
-wait
+	ip -net "$ns3" link set ns3eth1 up
 
-ip -net "$ns3" link set ns3eth1 up
+	stop_if_error "Failed with one link down."
 
-stop_if_error "Failed with one link down."
+	echo "INFO: Delay the link and drop a few packages."
+	tc -net "$ns3" qdisc add dev ns3eth1 root netem delay 50ms
+	tc -net "$ns2" qdisc add dev ns2eth1 root netem delay 5ms loss 25%
 
-echo "INFO: Delay the link and drop a few packages."
-tc -net "$ns3" qdisc add dev ns3eth1 root netem delay 50ms
-tc -net "$ns2" qdisc add dev ns2eth1 root netem delay 5ms loss 25%
+	do_ping_long "$ns1" 100.64.0.2
+	do_ping_long "$ns1" 100.64.0.3
 
-do_ping_long "$ns1" 100.64.0.2
-do_ping_long "$ns1" 100.64.0.3
+	stop_if_error "Failed with delay and packetloss."
 
-stop_if_error "Failed with delay and packetloss."
+	do_ping_long "$ns2" 100.64.0.1
+	do_ping_long "$ns2" 100.64.0.3
 
-do_ping_long "$ns2" 100.64.0.1
-do_ping_long "$ns2" 100.64.0.3
+	stop_if_error "Failed with delay and packetloss."
 
-stop_if_error "Failed with delay and packetloss."
+	do_ping_long "$ns3" 100.64.0.1
+	do_ping_long "$ns3" 100.64.0.2
+	stop_if_error "Failed with delay and packetloss."
+
+	echo "INFO: All good."
+}
+
+setup_hsr_interfaces()
+{
+	local HSRv="$1"
+
+	echo "INFO: preparing interfaces for HSRv${HSRv}."
+# Three HSR nodes. Each node has one link to each of its neighbour, two links in total.
+#
+#    ns1eth1 ----- ns2eth1
+#      hsr1         hsr2
+#    ns1eth2       ns2eth2
+#       |            |
+#    ns3eth1      ns3eth2
+#           \    /
+#            hsr3
+#
+	# Interfaces
+	ip link add ns1eth1 netns "$ns1" type veth peer name ns2eth1 netns "$ns2"
+	ip link add ns1eth2 netns "$ns1" type veth peer name ns3eth1 netns "$ns3"
+	ip link add ns3eth2 netns "$ns3" type veth peer name ns2eth2 netns "$ns2"
+
+	# HSRv0/1
+	ip -net "$ns1" link add name hsr1 type hsr slave1 ns1eth1 slave2 ns1eth2 supervision 45 version $HSRv proto 0
+	ip -net "$ns2" link add name hsr2 type hsr slave1 ns2eth1 slave2 ns2eth2 supervision 45 version $HSRv proto 0
+	ip -net "$ns3" link add name hsr3 type hsr slave1 ns3eth1 slave2 ns3eth2 supervision 45 version $HSRv proto 0
+
+	# IP for HSR
+	ip -net "$ns1" addr add 100.64.0.1/24 dev hsr1
+	ip -net "$ns1" addr add dead:beef:1::1/64 dev hsr1 nodad
+	ip -net "$ns2" addr add 100.64.0.2/24 dev hsr2
+	ip -net "$ns2" addr add dead:beef:1::2/64 dev hsr2 nodad
+	ip -net "$ns3" addr add 100.64.0.3/24 dev hsr3
+	ip -net "$ns3" addr add dead:beef:1::3/64 dev hsr3 nodad
+
+	# All Links up
+	ip -net "$ns1" link set ns1eth1 up
+	ip -net "$ns1" link set ns1eth2 up
+	ip -net "$ns1" link set hsr1 up
+
+	ip -net "$ns2" link set ns2eth1 up
+	ip -net "$ns2" link set ns2eth2 up
+	ip -net "$ns2" link set hsr2 up
+
+	ip -net "$ns3" link set ns3eth1 up
+	ip -net "$ns3" link set ns3eth2 up
+	ip -net "$ns3" link set hsr3 up
+}
+
+ip -Version > /dev/null 2>&1
+if [ $? -ne 0 ];then
+	echo "SKIP: Could not run test without ip tool"
+	exit $ksft_skip
+fi
+
+trap cleanup EXIT
+
+for i in "$ns1" "$ns2" "$ns3" ;do
+	ip netns add $i || exit $ksft_skip
+	ip -net $i link set lo up
+done
+
+setup_hsr_interfaces 0
+do_complete_ping_test
+cleanup
+
+for i in "$ns1" "$ns2" "$ns3" ;do
+	ip netns add $i || exit $ksft_skip
+	ip -net $i link set lo up
+done
 
-do_ping_long "$ns3" 100.64.0.1
-do_ping_long "$ns3" 100.64.0.2
-stop_if_error "Failed with delay and packetloss."
+setup_hsr_interfaces 1
+do_complete_ping_test
 
-echo "INFO: All good."
 exit $ret
diff --git a/tools/testing/selftests/net/tls.c b/tools/testing/selftests/net/tls.c
index 297d972558fb..464853a7f982 100644
--- a/tools/testing/selftests/net/tls.c
+++ b/tools/testing/selftests/net/tls.c
@@ -613,11 +613,11 @@ TEST_F(tls, sendmsg_large)
 
 		msg.msg_iov = &vec;
 		msg.msg_iovlen = 1;
-		EXPECT_EQ(sendmsg(self->cfd, &msg, 0), send_len);
+		EXPECT_EQ(sendmsg(self->fd, &msg, 0), send_len);
 	}
 
 	while (recvs++ < sends) {
-		EXPECT_NE(recv(self->fd, mem, send_len, 0), -1);
+		EXPECT_NE(recv(self->cfd, mem, send_len, 0), -1);
 	}
 
 	free(mem);
@@ -646,9 +646,9 @@ TEST_F(tls, sendmsg_multiple)
 	msg.msg_iov = vec;
 	msg.msg_iovlen = iov_len;
 
-	EXPECT_EQ(sendmsg(self->cfd, &msg, 0), total_len);
+	EXPECT_EQ(sendmsg(self->fd, &msg, 0), total_len);
 	buf = malloc(total_len);
-	EXPECT_NE(recv(self->fd, buf, total_len, 0), -1);
+	EXPECT_NE(recv(self->cfd, buf, total_len, 0), -1);
 	for (i = 0; i < iov_len; i++) {
 		EXPECT_EQ(memcmp(test_strs[i], buf + len_cmp,
 				 strlen(test_strs[i])),
diff --git a/tools/testing/selftests/netfilter/.gitignore b/tools/testing/selftests/netfilter/.gitignore
index 4cb887b57413..4b2928e1c19d 100644
--- a/tools/testing/selftests/netfilter/.gitignore
+++ b/tools/testing/selftests/netfilter/.gitignore
@@ -1,3 +1,4 @@
 # SPDX-License-Identifier: GPL-2.0-only
 nf-queue
 connect_close
+audit_logread
diff --git a/tools/testing/selftests/netfilter/Makefile b/tools/testing/selftests/netfilter/Makefile
index 3686bfa6c58d..321db8850da0 100644
--- a/tools/testing/selftests/netfilter/Makefile
+++ b/tools/testing/selftests/netfilter/Makefile
@@ -6,13 +6,13 @@ TEST_PROGS := nft_trans_stress.sh nft_fib.sh nft_nat.sh bridge_brouter.sh \
 	nft_concat_range.sh nft_conntrack_helper.sh \
 	nft_queue.sh nft_meta.sh nf_nat_edemux.sh \
 	ipip-conntrack-mtu.sh conntrack_tcp_unreplied.sh \
-	conntrack_vrf.sh nft_synproxy.sh rpath.sh
+	conntrack_vrf.sh nft_synproxy.sh rpath.sh nft_audit.sh
 
 HOSTPKG_CONFIG := pkg-config
 
 CFLAGS += $(shell $(HOSTPKG_CONFIG) --cflags libmnl 2>/dev/null)
 LDLIBS += $(shell $(HOSTPKG_CONFIG) --libs libmnl 2>/dev/null || echo -lmnl)
 
-TEST_GEN_FILES =  nf-queue connect_close
+TEST_GEN_FILES =  nf-queue connect_close audit_logread
 
 include ../lib.mk
diff --git a/tools/testing/selftests/netfilter/audit_logread.c b/tools/testing/selftests/netfilter/audit_logread.c
new file mode 100644
index 000000000000..a0a880fc2d9d
--- /dev/null
+++ b/tools/testing/selftests/netfilter/audit_logread.c
@@ -0,0 +1,165 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#define _GNU_SOURCE
+#include <errno.h>
+#include <fcntl.h>
+#include <poll.h>
+#include <signal.h>
+#include <stdint.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <sys/socket.h>
+#include <unistd.h>
+#include <linux/audit.h>
+#include <linux/netlink.h>
+
+static int fd;
+
+#define MAX_AUDIT_MESSAGE_LENGTH	8970
+struct audit_message {
+	struct nlmsghdr nlh;
+	union {
+		struct audit_status s;
+		char data[MAX_AUDIT_MESSAGE_LENGTH];
+	} u;
+};
+
+int audit_recv(int fd, struct audit_message *rep)
+{
+	struct sockaddr_nl addr;
+	socklen_t addrlen = sizeof(addr);
+	int ret;
+
+	do {
+		ret = recvfrom(fd, rep, sizeof(*rep), 0,
+			       (struct sockaddr *)&addr, &addrlen);
+	} while (ret < 0 && errno == EINTR);
+
+	if (ret < 0 ||
+	    addrlen != sizeof(addr) ||
+	    addr.nl_pid != 0 ||
+	    rep->nlh.nlmsg_type == NLMSG_ERROR) /* short-cut for now */
+		return -1;
+
+	return ret;
+}
+
+int audit_send(int fd, uint16_t type, uint32_t key, uint32_t val)
+{
+	static int seq = 0;
+	struct audit_message msg = {
+		.nlh = {
+			.nlmsg_len   = NLMSG_SPACE(sizeof(msg.u.s)),
+			.nlmsg_type  = type,
+			.nlmsg_flags = NLM_F_REQUEST | NLM_F_ACK,
+			.nlmsg_seq   = ++seq,
+		},
+		.u.s = {
+			.mask    = key,
+			.enabled = key == AUDIT_STATUS_ENABLED ? val : 0,
+			.pid     = key == AUDIT_STATUS_PID ? val : 0,
+		}
+	};
+	struct sockaddr_nl addr = {
+		.nl_family = AF_NETLINK,
+	};
+	int ret;
+
+	do {
+		ret = sendto(fd, &msg, msg.nlh.nlmsg_len, 0,
+			     (struct sockaddr *)&addr, sizeof(addr));
+	} while (ret < 0 && errno == EINTR);
+
+	if (ret != (int)msg.nlh.nlmsg_len)
+		return -1;
+	return 0;
+}
+
+int audit_set(int fd, uint32_t key, uint32_t val)
+{
+	struct audit_message rep = { 0 };
+	int ret;
+
+	ret = audit_send(fd, AUDIT_SET, key, val);
+	if (ret)
+		return ret;
+
+	ret = audit_recv(fd, &rep);
+	if (ret < 0)
+		return ret;
+	return 0;
+}
+
+int readlog(int fd)
+{
+	struct audit_message rep = { 0 };
+	int ret = audit_recv(fd, &rep);
+	const char *sep = "";
+	char *k, *v;
+
+	if (ret < 0)
+		return ret;
+
+	if (rep.nlh.nlmsg_type != AUDIT_NETFILTER_CFG)
+		return 0;
+
+	/* skip the initial "audit(...): " part */
+	strtok(rep.u.data, " ");
+
+	while ((k = strtok(NULL, "="))) {
+		v = strtok(NULL, " ");
+
+		/* these vary and/or are uninteresting, ignore */
+		if (!strcmp(k, "pid") ||
+		    !strcmp(k, "comm") ||
+		    !strcmp(k, "subj"))
+			continue;
+
+		/* strip the varying sequence number */
+		if (!strcmp(k, "table"))
+			*strchrnul(v, ':') = '\0';
+
+		printf("%s%s=%s", sep, k, v);
+		sep = " ";
+	}
+	if (*sep) {
+		printf("\n");
+		fflush(stdout);
+	}
+	return 0;
+}
+
+void cleanup(int sig)
+{
+	audit_set(fd, AUDIT_STATUS_ENABLED, 0);
+	close(fd);
+	if (sig)
+		exit(0);
+}
+
+int main(int argc, char **argv)
+{
+	struct sigaction act = {
+		.sa_handler = cleanup,
+	};
+
+	fd = socket(PF_NETLINK, SOCK_RAW, NETLINK_AUDIT);
+	if (fd < 0) {
+		perror("Can't open netlink socket");
+		return -1;
+	}
+
+	if (sigaction(SIGTERM, &act, NULL) < 0 ||
+	    sigaction(SIGINT, &act, NULL) < 0) {
+		perror("Can't set signal handler");
+		close(fd);
+		return -1;
+	}
+
+	audit_set(fd, AUDIT_STATUS_ENABLED, 1);
+	audit_set(fd, AUDIT_STATUS_PID, getpid());
+
+	while (1)
+		readlog(fd);
+}
diff --git a/tools/testing/selftests/netfilter/config b/tools/testing/selftests/netfilter/config
index 4faf2ce021d9..7c42b1b2c69b 100644
--- a/tools/testing/selftests/netfilter/config
+++ b/tools/testing/selftests/netfilter/config
@@ -6,3 +6,4 @@ CONFIG_NFT_REDIR=m
 CONFIG_NFT_MASQ=m
 CONFIG_NFT_FLOW_OFFLOAD=m
 CONFIG_NF_CT_NETLINK=m
+CONFIG_AUDIT=y
diff --git a/tools/testing/selftests/netfilter/nft_audit.sh b/tools/testing/selftests/netfilter/nft_audit.sh
new file mode 100755
index 000000000000..83c271b1c735
--- /dev/null
+++ b/tools/testing/selftests/netfilter/nft_audit.sh
@@ -0,0 +1,108 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# Check that audit logs generated for nft commands are as expected.
+
+SKIP_RC=4
+RC=0
+
+nft --version >/dev/null 2>&1 || {
+	echo "SKIP: missing nft tool"
+	exit $SKIP_RC
+}
+
+logfile=$(mktemp)
+echo "logging into $logfile"
+./audit_logread >"$logfile" &
+logread_pid=$!
+trap 'kill $logread_pid; rm -f $logfile' EXIT
+exec 3<"$logfile"
+
+do_test() { # (cmd, log)
+	echo -n "testing for cmd: $1 ... "
+	cat <&3 >/dev/null
+	$1 >/dev/null || exit 1
+	sleep 0.1
+	res=$(diff -a -u <(echo "$2") - <&3)
+	[ $? -eq 0 ] && { echo "OK"; return; }
+	echo "FAIL"
+	echo "$res"
+	((RC++))
+}
+
+nft flush ruleset
+
+for table in t1 t2; do
+	do_test "nft add table $table" \
+	"table=$table family=2 entries=1 op=nft_register_table"
+
+	do_test "nft add chain $table c1" \
+	"table=$table family=2 entries=1 op=nft_register_chain"
+
+	do_test "nft add chain $table c2; add chain $table c3" \
+	"table=$table family=2 entries=2 op=nft_register_chain"
+
+	cmd="add rule $table c1 counter"
+
+	do_test "nft $cmd" \
+	"table=$table family=2 entries=1 op=nft_register_rule"
+
+	do_test "nft $cmd; $cmd" \
+	"table=$table family=2 entries=2 op=nft_register_rule"
+
+	cmd=""
+	sep=""
+	for chain in c2 c3; do
+		for i in {1..3}; do
+			cmd+="$sep add rule $table $chain counter"
+			sep=";"
+		done
+	done
+	do_test "nft $cmd" \
+	"table=$table family=2 entries=6 op=nft_register_rule"
+done
+
+do_test 'nft reset rules t1 c2' \
+'table=t1 family=2 entries=3 op=nft_reset_rule'
+
+do_test 'nft reset rules table t1' \
+'table=t1 family=2 entries=3 op=nft_reset_rule
+table=t1 family=2 entries=3 op=nft_reset_rule
+table=t1 family=2 entries=3 op=nft_reset_rule'
+
+do_test 'nft reset rules' \
+'table=t1 family=2 entries=3 op=nft_reset_rule
+table=t1 family=2 entries=3 op=nft_reset_rule
+table=t1 family=2 entries=3 op=nft_reset_rule
+table=t2 family=2 entries=3 op=nft_reset_rule
+table=t2 family=2 entries=3 op=nft_reset_rule
+table=t2 family=2 entries=3 op=nft_reset_rule'
+
+for ((i = 0; i < 500; i++)); do
+	echo "add rule t2 c3 counter accept comment \"rule $i\""
+done | do_test 'nft -f -' \
+'table=t2 family=2 entries=500 op=nft_register_rule'
+
+do_test 'nft reset rules t2 c3' \
+'table=t2 family=2 entries=189 op=nft_reset_rule
+table=t2 family=2 entries=188 op=nft_reset_rule
+table=t2 family=2 entries=126 op=nft_reset_rule'
+
+do_test 'nft reset rules t2' \
+'table=t2 family=2 entries=3 op=nft_reset_rule
+table=t2 family=2 entries=3 op=nft_reset_rule
+table=t2 family=2 entries=186 op=nft_reset_rule
+table=t2 family=2 entries=188 op=nft_reset_rule
+table=t2 family=2 entries=129 op=nft_reset_rule'
+
+do_test 'nft reset rules' \
+'table=t1 family=2 entries=3 op=nft_reset_rule
+table=t1 family=2 entries=3 op=nft_reset_rule
+table=t1 family=2 entries=3 op=nft_reset_rule
+table=t2 family=2 entries=3 op=nft_reset_rule
+table=t2 family=2 entries=3 op=nft_reset_rule
+table=t2 family=2 entries=180 op=nft_reset_rule
+table=t2 family=2 entries=188 op=nft_reset_rule
+table=t2 family=2 entries=135 op=nft_reset_rule'
+
+exit $RC