Merge tag 'net-next-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "Core:

   - Enable memcg accounting for various networking objects.

  BPF:

   - Introduce bpf timers.

   - Add perf link and opaque bpf_cookie which the program can read out
     again, to be used in libbpf-based USDT library.

   - Add bpf_task_pt_regs() helper to access user space pt_regs in
     kprobes, to help user space stack unwinding.

   - Add support for UNIX sockets for BPF sockmap.

   - Extend BPF iterator support for UNIX domain sockets.

   - Allow BPF TCP congestion control progs and bpf iterators to call
     bpf_setsockopt(), e.g. to switch to another congestion control
     algorithm.

  Protocols:

   - Support IOAM Pre-allocated Trace with IPv6.

   - Support Management Component Transport Protocol.

   - bridge: multicast: add vlan support.

   - netfilter: add hooks for the SRv6 lightweight tunnel driver.

   - tcp:
       - enable mid-stream window clamping (by user space or BPF)
       - allow data-less, empty-cookie SYN with TFO_SERVER_COOKIE_NOT_REQD
       - more accurate DSACK processing for RACK-TLP

   - mptcp:
       - add full mesh path manager option
       - add partial support for MP_FAIL
       - improve use of backup subflows
       - optimize option processing

   - af_unix: add OOB notification support.

   - ipv6: add IFLA_INET6_RA_MTU to expose MTU value advertised by the
     router.

   - mac80211: Target Wake Time support in AP mode.

   - can: j1939: extend UAPI to notify about RX status.

  Driver APIs:

   - Add page frag support in page pool API.

   - Many improvements to the DSA (distributed switch) APIs.

   - ethtool: extend IRQ coalesce uAPI with timer reset modes.

   - devlink: control which auxiliary devices are created.

   - Support CAN PHYs via the generic PHY subsystem.

   - Proper cross-chip support for tag_8021q.

   - Allow TX forwarding for the software bridge data path to be
     offloaded to capable devices.

  Drivers:

   - veth: more flexible channels number configuration.

   - openvswitch: introduce per-cpu upcall dispatch.

   - Add internet mix (IMIX) mode to pktgen.

   - Transparently handle XDP operations in the bonding driver.

   - Add LiteETH network driver.

   - Renesas (ravb):
       - support Gigabit Ethernet IP

   - NXP Ethernet switch (sja1105):
       - fast aging support
       - support for "H" switch topologies
       - traffic termination for ports under VLAN-aware bridge

   - Intel 1G Ethernet
       - support getcrosststamp() with PCIe PTM (Precision Time
         Measurement) for better time sync
       - support Credit-Based Shaper (CBS) offload, enabling HW traffic
         prioritization and bandwidth reservation

   - Broadcom Ethernet (bnxt)
       - support pulse-per-second output
       - support larger Rx rings

   - Mellanox Ethernet (mlx5)
       - support ethtool RSS contexts and MQPRIO channel mode
       - support LAG offload with bridging
       - support devlink rate limit API
       - support packet sampling on tunnels

   - Huawei Ethernet (hns3):
       - basic devlink support
       - add extended IRQ coalescing support
       - report extended link state

   - Netronome Ethernet (nfp):
       - add conntrack offload support

   - Broadcom WiFi (brcmfmac):
       - add WPA3 Personal with FT to supported cipher suites
       - support 43752 SDIO device

   - Intel WiFi (iwlwifi):
       - support scanning hidden 6GHz networks
       - support for a new hardware family (Bz)

   - Xen pv driver:
       - harden netfront against malicious backends

   - Qualcomm mobile
       - ipa: refactor power management and enable automatic suspend
       - mhi: move MBIM to WWAN subsystem interfaces

  Refactor:

   - Ambient BPF run context and cgroup storage cleanup.

   - Compat rework for ndo_ioctl.

  Old code removal:

   - prism54 remove the obsoleted driver, deprecated by the p54 driver.

   - wan: remove sbni/granch driver"

* tag 'net-next-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1715 commits)
  net: Add depends on OF_NET for LiteX's LiteETH
  ipv6: seg6: remove duplicated include
  net: hns3: remove unnecessary spaces
  net: hns3: add some required spaces
  net: hns3: clean up a type mismatch warning
  net: hns3: refine function hns3_set_default_feature()
  ipv6: remove duplicated 'net/lwtunnel.h' include
  net: w5100: check return value after calling platform_get_resource()
  net/mlxbf_gige: Make use of devm_platform_ioremap_resourcexxx()
  net: mdio: mscc-miim: Make use of the helper function devm_platform_ioremap_resource()
  net: mdio-ipq4019: Make use of devm_platform_ioremap_resource()
  fou: remove sparse errors
  ipv4: fix endianness issue in inet_rtm_getroute_build_skb()
  octeontx2-af: Set proper errorcode for IPv4 checksum errors
  octeontx2-af: Fix static code analyzer reported issues
  octeontx2-af: Fix mailbox errors in nix_rss_flowkey_cfg
  octeontx2-af: Fix loop in free and unmap counter
  af_unix: fix potential NULL deref in unix_dgram_connect()
  dpaa2-eth: Replace strlcpy with strscpy
  octeontx2-af: Use NDC TX for transmit packet data
  ...

1 files changed, 182 insertions, 1 deletions

diff --git a/tools/testing/selftests/net/veth.sh b/tools/testing/selftests/net/veth.sh
index 11d7cdb898c0..19eac3e44c06 100755
--- a/tools/testing/selftests/net/veth.sh
+++ b/tools/testing/selftests/net/veth.sh
@@ -13,7 +13,7 @@ readonly NS_DST=$BASE$DST
 readonly BM_NET_V4=192.168.1.
 readonly BM_NET_V6=2001:db8::
 
-readonly NPROCS=`nproc`
+readonly CPUS=`nproc`
 ret=0
 
 cleanup() {
@@ -75,6 +75,29 @@ chk_tso_flag() {
 	__chk_flag "$1" $2 $3 tcp-segmentation-offload
 }
 
+chk_channels() {
+	local msg="$1"
+	local target=$2
+	local rx=$3
+	local tx=$4
+
+	local dev=veth$target
+
+	local cur_rx=`ip netns exec $BASE$target ethtool -l $dev |\
+		grep RX: | tail -n 1 | awk '{print $2}' `
+		local cur_tx=`ip netns exec $BASE$target ethtool -l $dev |\
+		grep TX: | tail -n 1 | awk '{print $2}'`
+	local cur_combined=`ip netns exec $BASE$target ethtool -l $dev |\
+		grep Combined: | tail -n 1 | awk '{print $2}'`
+
+	printf "%-60s" "$msg"
+	if [ "$cur_rx" = "$rx" -a "$cur_tx" = "$tx" -a "$cur_combined" = "n/a" ]; then
+		echo " ok "
+	else
+		echo " fail rx:$rx:$cur_rx tx:$tx:$cur_tx combined:n/a:$cur_combined"
+	fi
+}
+
 chk_gro() {
 	local msg="$1"
 	local expected=$2
@@ -107,11 +130,100 @@ chk_gro() {
 	fi
 }
 
+__change_channels()
+{
+	local cur_cpu
+	local end=$1
+	local cur
+	local i
+
+	while true; do
+		printf -v cur '%(%s)T'
+		[ $cur -le $end ] || break
+
+		for i in `seq 1 $CPUS`; do
+			ip netns exec $NS_SRC ethtool -L veth$SRC rx $i tx $i
+			ip netns exec $NS_DST ethtool -L veth$DST rx $i tx $i
+		done
+
+		for i in `seq 1 $((CPUS - 1))`; do
+			cur_cpu=$((CPUS - $i))
+			ip netns exec $NS_SRC ethtool -L veth$SRC rx $cur_cpu tx $cur_cpu
+			ip netns exec $NS_DST ethtool -L veth$DST rx $cur_cpu tx $cur_cpu
+		done
+	done
+}
+
+__send_data() {
+	local end=$1
+
+	while true; do
+		printf -v cur '%(%s)T'
+		[ $cur -le $end ] || break
+
+		ip netns exec $NS_SRC ./udpgso_bench_tx -4 -s 1000 -M 300 -D $BM_NET_V4$DST
+	done
+}
+
+do_stress() {
+	local end
+	printf -v end '%(%s)T'
+	end=$((end + $STRESS))
+
+	ip netns exec $NS_SRC ethtool -L veth$SRC rx 3 tx 3
+	ip netns exec $NS_DST ethtool -L veth$DST rx 3 tx 3
+
+	ip netns exec $NS_DST ./udpgso_bench_rx &
+	local rx_pid=$!
+
+	echo "Running stress test for $STRESS seconds..."
+	__change_channels $end &
+	local ch_pid=$!
+	__send_data $end &
+	local data_pid_1=$!
+	__send_data $end &
+	local data_pid_2=$!
+	__send_data $end &
+	local data_pid_3=$!
+	__send_data $end &
+	local data_pid_4=$!
+
+	wait $ch_pid $data_pid_1 $data_pid_2 $data_pid_3 $data_pid_4
+	kill -9 $rx_pid
+	echo "done"
+
+	# restore previous setting
+	ip netns exec $NS_SRC ethtool -L veth$SRC rx 2 tx 2
+	ip netns exec $NS_DST ethtool -L veth$DST rx 2 tx 1
+}
+
+usage() {
+	echo "Usage: $0 [-h] [-s <seconds>]"
+	echo -e "\t-h: show this help"
+	echo -e "\t-s: run optional stress tests for the given amount of seconds"
+}
+
+STRESS=0
+while getopts "hs:" option; do
+	case "$option" in
+	"h")
+		usage $0
+		exit 0
+		;;
+	"s")
+		STRESS=$OPTARG
+		;;
+	esac
+done
+
 if [ ! -f ../bpf/xdp_dummy.o ]; then
 	echo "Missing xdp_dummy helper. Build bpf selftest first"
 	exit 1
 fi
 
+[ $CPUS -lt 2 ] && echo "Only one CPU available, some tests will be skipped"
+[ $STRESS -gt 0 -a $CPUS -lt 3 ] && echo " stress test will be skipped, too"
+
 create_ns
 chk_gro_flag "default - gro flag" $SRC off
 chk_gro_flag "        - peer gro flag" $DST off
@@ -134,6 +246,8 @@ chk_gro "        - aggregation with TSO off" 1
 cleanup
 
 create_ns
+chk_channels "default channels" $DST 1 1
+
 ip -n $NS_DST link set dev veth$DST down
 ip netns exec $NS_DST ethtool -K veth$DST gro on
 chk_gro_flag "with gro enabled on link down - gro flag" $DST on
@@ -147,6 +261,56 @@ chk_gro "        - aggregation with TSO off" 1
 cleanup
 
 create_ns
+
+CUR_TX=1
+CUR_RX=1
+if [ $CPUS -gt 1 ]; then
+	ip netns exec $NS_DST ethtool -L veth$DST tx 2
+	chk_channels "setting tx channels" $DST 1 2
+	CUR_TX=2
+fi
+
+if [ $CPUS -gt 2 ]; then
+	ip netns exec $NS_DST ethtool -L veth$DST rx 3 tx 3
+	chk_channels "setting both rx and tx channels" $DST 3 3
+	CUR_RX=3
+	CUR_TX=3
+fi
+
+ip netns exec $NS_DST ethtool -L veth$DST combined 2 2>/dev/null
+chk_channels "bad setting: combined channels" $DST $CUR_RX $CUR_TX
+
+ip netns exec $NS_DST ethtool -L veth$DST tx $((CPUS + 1)) 2>/dev/null
+chk_channels "setting invalid channels nr" $DST $CUR_RX $CUR_TX
+
+if [ $CPUS -gt 1 ]; then
+	# this also tests queues nr reduction
+	ip netns exec $NS_DST ethtool -L veth$DST rx 1 tx 2 2>/dev/null
+	ip netns exec $NS_SRC ethtool -L veth$SRC rx 1 tx 2 2>/dev/null
+	printf "%-60s" "bad setting: XDP with RX nr less than TX"
+	ip -n $NS_DST link set dev veth$DST xdp object ../bpf/xdp_dummy.o \
+		section xdp_dummy 2>/dev/null &&\
+		echo "fail - set operation successful ?!?" || echo " ok "
+
+	# the following tests will run with multiple channels active
+	ip netns exec $NS_SRC ethtool -L veth$SRC rx 2
+	ip netns exec $NS_DST ethtool -L veth$DST rx 2
+	ip -n $NS_DST link set dev veth$DST xdp object ../bpf/xdp_dummy.o \
+		section xdp_dummy 2>/dev/null
+	printf "%-60s" "bad setting: reducing RX nr below peer TX with XDP set"
+	ip netns exec $NS_DST ethtool -L veth$DST rx 1 2>/dev/null &&\
+		echo "fail - set operation successful ?!?" || echo " ok "
+	CUR_RX=2
+	CUR_TX=2
+fi
+
+if [ $CPUS -gt 2 ]; then
+	printf "%-60s" "bad setting: increasing peer TX nr above RX with XDP set"
+	ip netns exec $NS_SRC ethtool -L veth$SRC tx 3 2>/dev/null &&\
+		echo "fail - set operation successful ?!?" || echo " ok "
+	chk_channels "setting invalid channels nr" $DST 2 2
+fi
+
 ip -n $NS_DST link set dev veth$DST xdp object ../bpf/xdp_dummy.o section xdp_dummy 2>/dev/null
 chk_gro_flag "with xdp attached - gro flag" $DST on
 chk_gro_flag "        - peer gro flag" $SRC off
@@ -167,10 +331,27 @@ chk_gro_flag "        - after gro on xdp off, gro flag" $DST on
 chk_gro_flag "        - peer gro flag" $SRC off
 chk_tso_flag "        - tso flag" $SRC on
 chk_tso_flag "        - peer tso flag" $DST on
+
+if [ $CPUS -gt 1 ]; then
+	ip netns exec $NS_DST ethtool -L veth$DST tx 1
+	chk_channels "decreasing tx channels with device down" $DST 2 1
+fi
+
 ip -n $NS_DST link set dev veth$DST up
 ip -n $NS_SRC link set dev veth$SRC up
 chk_gro "        - aggregation" 1
 
+if [ $CPUS -gt 1 ]; then
+	[ $STRESS -gt 0 -a $CPUS -gt 2 ] && do_stress
+
+	ip -n $NS_DST link set dev veth$DST down
+	ip -n $NS_SRC link set dev veth$SRC down
+	ip netns exec $NS_DST ethtool -L veth$DST tx 2
+	chk_channels "increasing tx channels with device down" $DST 2 2
+	ip -n $NS_DST link set dev veth$DST up
+	ip -n $NS_SRC link set dev veth$SRC up
+fi
+
 ip netns exec $NS_DST ethtool -K veth$DST gro off
 ip netns exec $NS_SRC ethtool -K veth$SRC tx-udp-segmentation off
 chk_gro "aggregation again with default and TSO off" 10