Merge tag 'v6.14-rc4' into next

Sync up with the mainline.

20 files changed, 696 insertions, 355 deletions

diff --git a/tools/testing/selftests/drivers/net/Makefile b/tools/testing/selftests/drivers/net/Makefile
index 0fec8f9801ad..137470bdee0c 100644
--- a/tools/testing/selftests/drivers/net/Makefile
+++ b/tools/testing/selftests/drivers/net/Makefile
@@ -1,15 +1,18 @@
 # SPDX-License-Identifier: GPL-2.0
 
 TEST_INCLUDES := $(wildcard lib/py/*.py) \
+		 $(wildcard lib/sh/*.sh) \
 		 ../../net/net_helper.sh \
 		 ../../net/lib.sh \
 
 TEST_PROGS := \
 	netcons_basic.sh \
+	netcons_overflow.sh \
 	ping.py \
 	queues.py \
 	stats.py \
 	shaper.py \
+	hds.py \
 # end of TEST_PROGS
 
 include ../../lib.mk
diff --git a/tools/testing/selftests/drivers/net/bonding/Makefile b/tools/testing/selftests/drivers/net/bonding/Makefile
index 03a089165d3f..2b10854e4b1e 100644
--- a/tools/testing/selftests/drivers/net/bonding/Makefile
+++ b/tools/testing/selftests/drivers/net/bonding/Makefile
@@ -10,7 +10,7 @@ TEST_PROGS := \
 	mode-2-recovery-updelay.sh \
 	bond_options.sh \
 	bond-eth-type-change.sh \
-	bond_macvlan.sh
+	bond_macvlan_ipvlan.sh
 
 TEST_FILES := \
 	lag_lib.sh \
diff --git a/tools/testing/selftests/drivers/net/bonding/bond_macvlan.sh b/tools/testing/selftests/drivers/net/bonding/bond_macvlan.sh
deleted file mode 100755
index b609fb6231f4..000000000000
--- a/tools/testing/selftests/drivers/net/bonding/bond_macvlan.sh
+++ /dev/null
@@ -1,99 +0,0 @@
-#!/bin/bash
-# SPDX-License-Identifier: GPL-2.0
-#
-# Test macvlan over balance-alb
-
-lib_dir=$(dirname "$0")
-source ${lib_dir}/bond_topo_2d1c.sh
-
-m1_ns="m1-$(mktemp -u XXXXXX)"
-m2_ns="m1-$(mktemp -u XXXXXX)"
-m1_ip4="192.0.2.11"
-m1_ip6="2001:db8::11"
-m2_ip4="192.0.2.12"
-m2_ip6="2001:db8::12"
-
-cleanup()
-{
-	ip -n ${m1_ns} link del macv0
-	ip netns del ${m1_ns}
-	ip -n ${m2_ns} link del macv0
-	ip netns del ${m2_ns}
-
-	client_destroy
-	server_destroy
-	gateway_destroy
-}
-
-check_connection()
-{
-	local ns=${1}
-	local target=${2}
-	local message=${3:-"macvlan_over_bond"}
-	RET=0
-
-
-	ip netns exec ${ns} ping ${target} -c 4 -i 0.1 &>/dev/null
-	check_err $? "ping failed"
-	log_test "$mode: $message"
-}
-
-macvlan_over_bond()
-{
-	local param="$1"
-	RET=0
-
-	# setup new bond mode
-	bond_reset "${param}"
-
-	ip -n ${s_ns} link add link bond0 name macv0 type macvlan mode bridge
-	ip -n ${s_ns} link set macv0 netns ${m1_ns}
-	ip -n ${m1_ns} link set dev macv0 up
-	ip -n ${m1_ns} addr add ${m1_ip4}/24 dev macv0
-	ip -n ${m1_ns} addr add ${m1_ip6}/24 dev macv0
-
-	ip -n ${s_ns} link add link bond0 name macv0 type macvlan mode bridge
-	ip -n ${s_ns} link set macv0 netns ${m2_ns}
-	ip -n ${m2_ns} link set dev macv0 up
-	ip -n ${m2_ns} addr add ${m2_ip4}/24 dev macv0
-	ip -n ${m2_ns} addr add ${m2_ip6}/24 dev macv0
-
-	sleep 2
-
-	check_connection "${c_ns}" "${s_ip4}" "IPv4: client->server"
-	check_connection "${c_ns}" "${s_ip6}" "IPv6: client->server"
-	check_connection "${c_ns}" "${m1_ip4}" "IPv4: client->macvlan_1"
-	check_connection "${c_ns}" "${m1_ip6}" "IPv6: client->macvlan_1"
-	check_connection "${c_ns}" "${m2_ip4}" "IPv4: client->macvlan_2"
-	check_connection "${c_ns}" "${m2_ip6}" "IPv6: client->macvlan_2"
-	check_connection "${m1_ns}" "${m2_ip4}" "IPv4: macvlan_1->macvlan_2"
-	check_connection "${m1_ns}" "${m2_ip6}" "IPv6: macvlan_1->macvlan_2"
-
-
-	sleep 5
-
-	check_connection "${s_ns}" "${c_ip4}" "IPv4: server->client"
-	check_connection "${s_ns}" "${c_ip6}" "IPv6: server->client"
-	check_connection "${m1_ns}" "${c_ip4}" "IPv4: macvlan_1->client"
-	check_connection "${m1_ns}" "${c_ip6}" "IPv6: macvlan_1->client"
-	check_connection "${m2_ns}" "${c_ip4}" "IPv4: macvlan_2->client"
-	check_connection "${m2_ns}" "${c_ip6}" "IPv6: macvlan_2->client"
-	check_connection "${m2_ns}" "${m1_ip4}" "IPv4: macvlan_2->macvlan_2"
-	check_connection "${m2_ns}" "${m1_ip6}" "IPv6: macvlan_2->macvlan_2"
-
-	ip -n ${c_ns} neigh flush dev eth0
-}
-
-trap cleanup EXIT
-
-setup_prepare
-ip netns add ${m1_ns}
-ip netns add ${m2_ns}
-
-modes="active-backup balance-tlb balance-alb"
-
-for mode in $modes; do
-	macvlan_over_bond "mode $mode"
-done
-
-exit $EXIT_STATUS
diff --git a/tools/testing/selftests/drivers/net/bonding/bond_macvlan_ipvlan.sh b/tools/testing/selftests/drivers/net/bonding/bond_macvlan_ipvlan.sh
new file mode 100755
index 000000000000..c4711272fe45
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/bonding/bond_macvlan_ipvlan.sh
@@ -0,0 +1,96 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# Test macvlan/ipvlan over bond
+
+lib_dir=$(dirname "$0")
+source ${lib_dir}/bond_topo_2d1c.sh
+
+xvlan1_ns="xvlan1-$(mktemp -u XXXXXX)"
+xvlan2_ns="xvlan2-$(mktemp -u XXXXXX)"
+xvlan1_ip4="192.0.2.11"
+xvlan1_ip6="2001:db8::11"
+xvlan2_ip4="192.0.2.12"
+xvlan2_ip6="2001:db8::12"
+
+cleanup()
+{
+	client_destroy
+	server_destroy
+	gateway_destroy
+
+	ip netns del ${xvlan1_ns}
+	ip netns del ${xvlan2_ns}
+}
+
+check_connection()
+{
+	local ns=${1}
+	local target=${2}
+	local message=${3}
+	RET=0
+
+	ip netns exec ${ns} ping ${target} -c 4 -i 0.1 &>/dev/null
+	check_err $? "ping failed"
+	log_test "${bond_mode}/${xvlan_type}_${xvlan_mode}: ${message}"
+}
+
+xvlan_over_bond()
+{
+	local param="$1"
+	local xvlan_type="$2"
+	local xvlan_mode="$3"
+	RET=0
+
+	# setup new bond mode
+	bond_reset "${param}"
+
+	ip -n ${s_ns} link add link bond0 name ${xvlan_type}0 type ${xvlan_type} mode ${xvlan_mode}
+	ip -n ${s_ns} link set ${xvlan_type}0 netns ${xvlan1_ns}
+	ip -n ${xvlan1_ns} link set dev ${xvlan_type}0 up
+	ip -n ${xvlan1_ns} addr add ${xvlan1_ip4}/24 dev ${xvlan_type}0
+	ip -n ${xvlan1_ns} addr add ${xvlan1_ip6}/24 dev ${xvlan_type}0
+
+	ip -n ${s_ns} link add link bond0 name ${xvlan_type}0 type ${xvlan_type} mode ${xvlan_mode}
+	ip -n ${s_ns} link set ${xvlan_type}0 netns ${xvlan2_ns}
+	ip -n ${xvlan2_ns} link set dev ${xvlan_type}0 up
+	ip -n ${xvlan2_ns} addr add ${xvlan2_ip4}/24 dev ${xvlan_type}0
+	ip -n ${xvlan2_ns} addr add ${xvlan2_ip6}/24 dev ${xvlan_type}0
+
+	sleep 2
+
+	check_connection "${c_ns}" "${s_ip4}" "IPv4: client->server"
+	check_connection "${c_ns}" "${s_ip6}" "IPv6: client->server"
+	check_connection "${c_ns}" "${xvlan1_ip4}" "IPv4: client->${xvlan_type}_1"
+	check_connection "${c_ns}" "${xvlan1_ip6}" "IPv6: client->${xvlan_type}_1"
+	check_connection "${c_ns}" "${xvlan2_ip4}" "IPv4: client->${xvlan_type}_2"
+	check_connection "${c_ns}" "${xvlan2_ip6}" "IPv6: client->${xvlan_type}_2"
+	check_connection "${xvlan1_ns}" "${xvlan2_ip4}" "IPv4: ${xvlan_type}_1->${xvlan_type}_2"
+	check_connection "${xvlan1_ns}" "${xvlan2_ip6}" "IPv6: ${xvlan_type}_1->${xvlan_type}_2"
+
+	check_connection "${s_ns}" "${c_ip4}" "IPv4: server->client"
+	check_connection "${s_ns}" "${c_ip6}" "IPv6: server->client"
+	check_connection "${xvlan1_ns}" "${c_ip4}" "IPv4: ${xvlan_type}_1->client"
+	check_connection "${xvlan1_ns}" "${c_ip6}" "IPv6: ${xvlan_type}_1->client"
+	check_connection "${xvlan2_ns}" "${c_ip4}" "IPv4: ${xvlan_type}_2->client"
+	check_connection "${xvlan2_ns}" "${c_ip6}" "IPv6: ${xvlan_type}_2->client"
+	check_connection "${xvlan2_ns}" "${xvlan1_ip4}" "IPv4: ${xvlan_type}_2->${xvlan_type}_1"
+	check_connection "${xvlan2_ns}" "${xvlan1_ip6}" "IPv6: ${xvlan_type}_2->${xvlan_type}_1"
+
+	ip -n ${c_ns} neigh flush dev eth0
+}
+
+trap cleanup EXIT
+
+setup_prepare
+ip netns add ${xvlan1_ns}
+ip netns add ${xvlan2_ns}
+
+bond_modes="active-backup balance-tlb balance-alb"
+
+for bond_mode in ${bond_modes}; do
+	xvlan_over_bond "mode ${bond_mode}" macvlan bridge
+	xvlan_over_bond "mode ${bond_mode}" ipvlan  l2
+done
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/drivers/net/bonding/config b/tools/testing/selftests/drivers/net/bonding/config
index 899d7fb6ea8e..dad4e5fda4db 100644
--- a/tools/testing/selftests/drivers/net/bonding/config
+++ b/tools/testing/selftests/drivers/net/bonding/config
@@ -3,6 +3,7 @@ CONFIG_BRIDGE=y
 CONFIG_DUMMY=y
 CONFIG_IPV6=y
 CONFIG_MACVLAN=y
+CONFIG_IPVLAN=y
 CONFIG_NET_ACT_GACT=y
 CONFIG_NET_CLS_FLOWER=y
 CONFIG_NET_SCH_INGRESS=y
diff --git a/tools/testing/selftests/drivers/net/hds.py b/tools/testing/selftests/drivers/net/hds.py
new file mode 100755
index 000000000000..394971b25c0b
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/hds.py
@@ -0,0 +1,120 @@
+#!/usr/bin/env python3
+# SPDX-License-Identifier: GPL-2.0
+
+import errno
+from lib.py import ksft_run, ksft_exit, ksft_eq, ksft_raises, KsftSkipEx
+from lib.py import EthtoolFamily, NlError
+from lib.py import NetDrvEnv
+
+def get_hds(cfg, netnl) -> None:
+    try:
+        rings = netnl.rings_get({'header': {'dev-index': cfg.ifindex}})
+    except NlError as e:
+        raise KsftSkipEx('ring-get not supported by device')
+    if 'tcp-data-split' not in rings:
+        raise KsftSkipEx('tcp-data-split not supported by device')
+
+def get_hds_thresh(cfg, netnl) -> None:
+    try:
+        rings = netnl.rings_get({'header': {'dev-index': cfg.ifindex}})
+    except NlError as e:
+        raise KsftSkipEx('ring-get not supported by device')
+    if 'hds-thresh' not in rings:
+        raise KsftSkipEx('hds-thresh not supported by device')
+
+def set_hds_enable(cfg, netnl) -> None:
+    try:
+        netnl.rings_set({'header': {'dev-index': cfg.ifindex}, 'tcp-data-split': 'enabled'})
+    except NlError as e:
+        if e.error == errno.EINVAL:
+            raise KsftSkipEx("disabling of HDS not supported by the device")
+        elif e.error == errno.EOPNOTSUPP:
+            raise KsftSkipEx("ring-set not supported by the device")
+    try:
+        rings = netnl.rings_get({'header': {'dev-index': cfg.ifindex}})
+    except NlError as e:
+        raise KsftSkipEx('ring-get not supported by device')
+    if 'tcp-data-split' not in rings:
+        raise KsftSkipEx('tcp-data-split not supported by device')
+
+    ksft_eq('enabled', rings['tcp-data-split'])
+
+def set_hds_disable(cfg, netnl) -> None:
+    try:
+        netnl.rings_set({'header': {'dev-index': cfg.ifindex}, 'tcp-data-split': 'disabled'})
+    except NlError as e:
+        if e.error == errno.EINVAL:
+            raise KsftSkipEx("disabling of HDS not supported by the device")
+        elif e.error == errno.EOPNOTSUPP:
+            raise KsftSkipEx("ring-set not supported by the device")
+    try:
+        rings = netnl.rings_get({'header': {'dev-index': cfg.ifindex}})
+    except NlError as e:
+        raise KsftSkipEx('ring-get not supported by device')
+    if 'tcp-data-split' not in rings:
+        raise KsftSkipEx('tcp-data-split not supported by device')
+
+    ksft_eq('disabled', rings['tcp-data-split'])
+
+def set_hds_thresh_zero(cfg, netnl) -> None:
+    try:
+        netnl.rings_set({'header': {'dev-index': cfg.ifindex}, 'hds-thresh': 0})
+    except NlError as e:
+        if e.error == errno.EINVAL:
+            raise KsftSkipEx("hds-thresh-set not supported by the device")
+        elif e.error == errno.EOPNOTSUPP:
+            raise KsftSkipEx("ring-set not supported by the device")
+    try:
+        rings = netnl.rings_get({'header': {'dev-index': cfg.ifindex}})
+    except NlError as e:
+        raise KsftSkipEx('ring-get not supported by device')
+    if 'hds-thresh' not in rings:
+        raise KsftSkipEx('hds-thresh not supported by device')
+
+    ksft_eq(0, rings['hds-thresh'])
+
+def set_hds_thresh_max(cfg, netnl) -> None:
+    try:
+        rings = netnl.rings_get({'header': {'dev-index': cfg.ifindex}})
+    except NlError as e:
+        raise KsftSkipEx('ring-get not supported by device')
+    if 'hds-thresh' not in rings:
+        raise KsftSkipEx('hds-thresh not supported by device')
+    try:
+        netnl.rings_set({'header': {'dev-index': cfg.ifindex}, 'hds-thresh': rings['hds-thresh-max']})
+    except NlError as e:
+        if e.error == errno.EINVAL:
+            raise KsftSkipEx("hds-thresh-set not supported by the device")
+        elif e.error == errno.EOPNOTSUPP:
+            raise KsftSkipEx("ring-set not supported by the device")
+    rings = netnl.rings_get({'header': {'dev-index': cfg.ifindex}})
+    ksft_eq(rings['hds-thresh'], rings['hds-thresh-max'])
+
+def set_hds_thresh_gt(cfg, netnl) -> None:
+    try:
+        rings = netnl.rings_get({'header': {'dev-index': cfg.ifindex}})
+    except NlError as e:
+        raise KsftSkipEx('ring-get not supported by device')
+    if 'hds-thresh' not in rings:
+        raise KsftSkipEx('hds-thresh not supported by device')
+    if 'hds-thresh-max' not in rings:
+        raise KsftSkipEx('hds-thresh-max not defined by device')
+    hds_gt = rings['hds-thresh-max'] + 1
+    with ksft_raises(NlError) as e:
+        netnl.rings_set({'header': {'dev-index': cfg.ifindex}, 'hds-thresh': hds_gt})
+    ksft_eq(e.exception.nl_msg.error, -errno.EINVAL)
+
+def main() -> None:
+    with NetDrvEnv(__file__, queue_count=3) as cfg:
+        ksft_run([get_hds,
+                  get_hds_thresh,
+                  set_hds_disable,
+                  set_hds_enable,
+                  set_hds_thresh_zero,
+                  set_hds_thresh_max,
+                  set_hds_thresh_gt],
+                 args=(cfg, EthtoolFamily()))
+    ksft_exit()
+
+if __name__ == "__main__":
+    main()
diff --git a/tools/testing/selftests/drivers/net/hw/ncdevmem.c b/tools/testing/selftests/drivers/net/hw/ncdevmem.c
index 8e502a1f8f9b..19a6969643f4 100644
--- a/tools/testing/selftests/drivers/net/hw/ncdevmem.c
+++ b/tools/testing/selftests/drivers/net/hw/ncdevmem.c
@@ -619,9 +619,6 @@ int do_server(struct memory_buffer *mem)
 	fprintf(stderr, "page_aligned_frags=%lu, non_page_aligned_frags=%lu\n",
 		page_aligned_frags, non_page_aligned_frags);
 
-	fprintf(stderr, "page_aligned_frags=%lu, non_page_aligned_frags=%lu\n",
-		page_aligned_frags, non_page_aligned_frags);
-
 cleanup:
 
 	free(tmp_mem);
diff --git a/tools/testing/selftests/drivers/net/hw/pp_alloc_fail.py b/tools/testing/selftests/drivers/net/hw/pp_alloc_fail.py
index 05b6fbb3fcdd..ad192fef3117 100755
--- a/tools/testing/selftests/drivers/net/hw/pp_alloc_fail.py
+++ b/tools/testing/selftests/drivers/net/hw/pp_alloc_fail.py
@@ -21,9 +21,9 @@ def _enable_pp_allocation_fail():
     if not os.path.exists("/sys/kernel/debug/fail_function"):
         raise KsftSkipEx("Kernel built without function error injection (or DebugFS)")
 
-    if not os.path.exists("/sys/kernel/debug/fail_function/page_pool_alloc_pages"):
+    if not os.path.exists("/sys/kernel/debug/fail_function/page_pool_alloc_netmems"):
         with open("/sys/kernel/debug/fail_function/inject", "w") as fp:
-            fp.write("page_pool_alloc_pages\n")
+            fp.write("page_pool_alloc_netmems\n")
 
     _write_fail_config({
         "verbose": 0,
@@ -37,7 +37,7 @@ def _disable_pp_allocation_fail():
     if not os.path.exists("/sys/kernel/debug/fail_function"):
         return
 
-    if os.path.exists("/sys/kernel/debug/fail_function/page_pool_alloc_pages"):
+    if os.path.exists("/sys/kernel/debug/fail_function/page_pool_alloc_netmems"):
         with open("/sys/kernel/debug/fail_function/inject", "w") as fp:
             fp.write("\n")
 
diff --git a/tools/testing/selftests/drivers/net/hw/rss_ctx.py b/tools/testing/selftests/drivers/net/hw/rss_ctx.py
index ca8a7edff3dd..319aaa004c40 100755
--- a/tools/testing/selftests/drivers/net/hw/rss_ctx.py
+++ b/tools/testing/selftests/drivers/net/hw/rss_ctx.py
@@ -252,6 +252,7 @@ def test_rss_queue_reconfigure(cfg, main_ctx=True):
         try:
             # this targets queue 4, which doesn't exist
             ntuple2 = ethtool_create(cfg, "-N", flow)
+            defer(ethtool, f"-N {cfg.ifname} delete {ntuple2}")
         except CmdExitFailure:
             pass
         else:
@@ -259,7 +260,13 @@ def test_rss_queue_reconfigure(cfg, main_ctx=True):
         # change the table to target queues 0 and 2
         ethtool(f"-X {cfg.ifname} {ctx_ref} weight 1 0 1 0")
         # ntuple rule therefore targets queues 1 and 3
-        ntuple2 = ethtool_create(cfg, "-N", flow)
+        try:
+            ntuple2 = ethtool_create(cfg, "-N", flow)
+        except CmdExitFailure:
+            ksft_pr("Driver does not support rss + queue offset")
+            return
+
+        defer(ethtool, f"-N {cfg.ifname} delete {ntuple2}")
         # should replace existing filter
         ksft_eq(ntuple, ntuple2)
         _send_traffic_check(cfg, port, ctx_ref, { 'target': (1, 3),
diff --git a/tools/testing/selftests/drivers/net/lib/py/env.py b/tools/testing/selftests/drivers/net/lib/py/env.py
index 1ea9bb695e94..987e452d3a45 100644
--- a/tools/testing/selftests/drivers/net/lib/py/env.py
+++ b/tools/testing/selftests/drivers/net/lib/py/env.py
@@ -5,7 +5,7 @@ import time
 from pathlib import Path
 from lib.py import KsftSkipEx, KsftXfailEx
 from lib.py import ksft_setup
-from lib.py import cmd, ethtool, ip
+from lib.py import cmd, ethtool, ip, CmdExitFailure
 from lib.py import NetNS, NetdevSimDev
 from .remote import Remote
 
@@ -48,6 +48,7 @@ class NetDrvEnv:
         else:
             self._ns = NetdevSimDev(**kwargs)
             self.dev = self._ns.nsims[0].dev
+        self.ifname = self.dev['ifname']
         self.ifindex = self.dev['ifindex']
 
     def __enter__(self):
@@ -234,7 +235,12 @@ class NetDrvEpEnv:
         Good drivers will tell us via ethtool what their sync period is.
         """
         if self._stats_settle_time is None:
-            data = ethtool("-c " + self.ifname, json=True)[0]
+            data = {}
+            try:
+                data = ethtool("-c " + self.ifname, json=True)[0]
+            except CmdExitFailure as e:
+                if "Operation not supported" not in e.cmd.stderr:
+                    raise
 
             self._stats_settle_time = 0.025 + \
                 data.get('stats-block-usecs', 0) / 1000 / 1000
diff --git a/tools/testing/selftests/drivers/net/lib/sh/lib_netcons.sh b/tools/testing/selftests/drivers/net/lib/sh/lib_netcons.sh
new file mode 100644
index 000000000000..3acaba41ac7b
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/lib/sh/lib_netcons.sh
@@ -0,0 +1,225 @@
+#!/usr/bin/env bash
+# SPDX-License-Identifier: GPL-2.0
+
+# This file contains functions and helpers to support the netconsole
+# selftests
+#
+# Author: Breno Leitao <leitao@debian.org>
+
+set -euo pipefail
+
+LIBDIR=$(dirname "$(readlink -e "${BASH_SOURCE[0]}")")
+
+SRCIF="" # to be populated later
+SRCIP=192.0.2.1
+DSTIF="" # to be populated later
+DSTIP=192.0.2.2
+
+PORT="6666"
+MSG="netconsole selftest"
+USERDATA_KEY="key"
+USERDATA_VALUE="value"
+TARGET=$(mktemp -u netcons_XXXXX)
+DEFAULT_PRINTK_VALUES=$(cat /proc/sys/kernel/printk)
+NETCONS_CONFIGFS="/sys/kernel/config/netconsole"
+NETCONS_PATH="${NETCONS_CONFIGFS}"/"${TARGET}"
+# NAMESPACE will be populated by setup_ns with a random value
+NAMESPACE=""
+
+# IDs for netdevsim
+NSIM_DEV_1_ID=$((256 + RANDOM % 256))
+NSIM_DEV_2_ID=$((512 + RANDOM % 256))
+NSIM_DEV_SYS_NEW="/sys/bus/netdevsim/new_device"
+
+# Used to create and delete namespaces
+source "${LIBDIR}"/../../../../net/lib.sh
+source "${LIBDIR}"/../../../../net/net_helper.sh
+
+# Create netdevsim interfaces
+create_ifaces() {
+
+	echo "$NSIM_DEV_2_ID" > "$NSIM_DEV_SYS_NEW"
+	echo "$NSIM_DEV_1_ID" > "$NSIM_DEV_SYS_NEW"
+	udevadm settle 2> /dev/null || true
+
+	local NSIM1=/sys/bus/netdevsim/devices/netdevsim"$NSIM_DEV_1_ID"
+	local NSIM2=/sys/bus/netdevsim/devices/netdevsim"$NSIM_DEV_2_ID"
+
+	# These are global variables
+	SRCIF=$(find "$NSIM1"/net -maxdepth 1 -type d ! \
+		-path "$NSIM1"/net -exec basename {} \;)
+	DSTIF=$(find "$NSIM2"/net -maxdepth 1 -type d ! \
+		-path "$NSIM2"/net -exec basename {} \;)
+}
+
+link_ifaces() {
+	local NSIM_DEV_SYS_LINK="/sys/bus/netdevsim/link_device"
+	local SRCIF_IFIDX=$(cat /sys/class/net/"$SRCIF"/ifindex)
+	local DSTIF_IFIDX=$(cat /sys/class/net/"$DSTIF"/ifindex)
+
+	exec {NAMESPACE_FD}</var/run/netns/"${NAMESPACE}"
+	exec {INITNS_FD}</proc/self/ns/net
+
+	# Bind the dst interface to namespace
+	ip link set "${DSTIF}" netns "${NAMESPACE}"
+
+	# Linking one device to the other one (on the other namespace}
+	if ! echo "${INITNS_FD}:$SRCIF_IFIDX $NAMESPACE_FD:$DSTIF_IFIDX"  > $NSIM_DEV_SYS_LINK
+	then
+		echo "linking netdevsim1 with netdevsim2 should succeed"
+		cleanup
+		exit "${ksft_skip}"
+	fi
+}
+
+function configure_ip() {
+	# Configure the IPs for both interfaces
+	ip netns exec "${NAMESPACE}" ip addr add "${DSTIP}"/24 dev "${DSTIF}"
+	ip netns exec "${NAMESPACE}" ip link set "${DSTIF}" up
+
+	ip addr add "${SRCIP}"/24 dev "${SRCIF}"
+	ip link set "${SRCIF}" up
+}
+
+function set_network() {
+	# setup_ns function is coming from lib.sh
+	setup_ns NAMESPACE
+
+	# Create both interfaces, and assign the destination to a different
+	# namespace
+	create_ifaces
+
+	# Link both interfaces back to back
+	link_ifaces
+
+	configure_ip
+}
+
+function create_dynamic_target() {
+	DSTMAC=$(ip netns exec "${NAMESPACE}" \
+		 ip link show "${DSTIF}" | awk '/ether/ {print $2}')
+
+	# Create a dynamic target
+	mkdir "${NETCONS_PATH}"
+
+	echo "${DSTIP}" > "${NETCONS_PATH}"/remote_ip
+	echo "${SRCIP}" > "${NETCONS_PATH}"/local_ip
+	echo "${DSTMAC}" > "${NETCONS_PATH}"/remote_mac
+	echo "${SRCIF}" > "${NETCONS_PATH}"/dev_name
+
+	echo 1 > "${NETCONS_PATH}"/enabled
+}
+
+function cleanup() {
+	local NSIM_DEV_SYS_DEL="/sys/bus/netdevsim/del_device"
+
+	# delete netconsole dynamic reconfiguration
+	echo 0 > "${NETCONS_PATH}"/enabled
+	# Remove all the keys that got created during the selftest
+	find "${NETCONS_PATH}/userdata/" -mindepth 1 -type d -delete
+	# Remove the configfs entry
+	rmdir "${NETCONS_PATH}"
+
+	# Delete netdevsim devices
+	echo "$NSIM_DEV_2_ID" > "$NSIM_DEV_SYS_DEL"
+	echo "$NSIM_DEV_1_ID" > "$NSIM_DEV_SYS_DEL"
+
+	# this is coming from lib.sh
+	cleanup_all_ns
+
+	# Restoring printk configurations
+	echo "${DEFAULT_PRINTK_VALUES}" > /proc/sys/kernel/printk
+}
+
+function set_user_data() {
+	if [[ ! -d "${NETCONS_PATH}""/userdata" ]]
+	then
+		echo "Userdata path not available in ${NETCONS_PATH}/userdata"
+		exit "${ksft_skip}"
+	fi
+
+	KEY_PATH="${NETCONS_PATH}/userdata/${USERDATA_KEY}"
+	mkdir -p "${KEY_PATH}"
+	VALUE_PATH="${KEY_PATH}""/value"
+	echo "${USERDATA_VALUE}" > "${VALUE_PATH}"
+}
+
+function listen_port_and_save_to() {
+	local OUTPUT=${1}
+	# Just wait for 2 seconds
+	timeout 2 ip netns exec "${NAMESPACE}" \
+		socat UDP-LISTEN:"${PORT}",fork "${OUTPUT}"
+}
+
+function validate_result() {
+	local TMPFILENAME="$1"
+
+	# TMPFILENAME will contain something like:
+	# 6.11.1-0_fbk0_rc13_509_g30d75cea12f7,13,1822,115075213798,-;netconsole selftest: netcons_gtJHM
+	#  key=value
+
+	# Check if the file exists
+	if [ ! -f "$TMPFILENAME" ]; then
+		echo "FAIL: File was not generated." >&2
+		exit "${ksft_fail}"
+	fi
+
+	if ! grep -q "${MSG}" "${TMPFILENAME}"; then
+		echo "FAIL: ${MSG} not found in ${TMPFILENAME}" >&2
+		cat "${TMPFILENAME}" >&2
+		exit "${ksft_fail}"
+	fi
+
+	if ! grep -q "${USERDATA_KEY}=${USERDATA_VALUE}" "${TMPFILENAME}"; then
+		echo "FAIL: ${USERDATA_KEY}=${USERDATA_VALUE} not found in ${TMPFILENAME}" >&2
+		cat "${TMPFILENAME}" >&2
+		exit "${ksft_fail}"
+	fi
+
+	# Delete the file once it is validated, otherwise keep it
+	# for debugging purposes
+	rm "${TMPFILENAME}"
+	exit "${ksft_pass}"
+}
+
+function check_for_dependencies() {
+	if [ "$(id -u)" -ne 0 ]; then
+		echo "This test must be run as root" >&2
+		exit "${ksft_skip}"
+	fi
+
+	if ! which socat > /dev/null ; then
+		echo "SKIP: socat(1) is not available" >&2
+		exit "${ksft_skip}"
+	fi
+
+	if ! which ip > /dev/null ; then
+		echo "SKIP: ip(1) is not available" >&2
+		exit "${ksft_skip}"
+	fi
+
+	if ! which udevadm > /dev/null ; then
+		echo "SKIP: udevadm(1) is not available" >&2
+		exit "${ksft_skip}"
+	fi
+
+	if [ ! -f "${NSIM_DEV_SYS_NEW}" ]; then
+		echo "SKIP: file ${NSIM_DEV_SYS_NEW} does not exist. Check if CONFIG_NETDEVSIM is enabled" >&2
+		exit "${ksft_skip}"
+	fi
+
+	if [ ! -d "${NETCONS_CONFIGFS}" ]; then
+		echo "SKIP: directory ${NETCONS_CONFIGFS} does not exist. Check if NETCONSOLE_DYNAMIC is enabled" >&2
+		exit "${ksft_skip}"
+	fi
+
+	if ip link show "${DSTIF}" 2> /dev/null; then
+		echo "SKIP: interface ${DSTIF} exists in the system. Not overwriting it." >&2
+		exit "${ksft_skip}"
+	fi
+
+	if ip addr list | grep -E "inet.*(${SRCIP}|${DSTIP})" 2> /dev/null; then
+		echo "SKIP: IPs already in use. Skipping it" >&2
+		exit "${ksft_skip}"
+	fi
+}
diff --git a/tools/testing/selftests/drivers/net/mlxsw/rif_bridge.sh b/tools/testing/selftests/drivers/net/mlxsw/rif_bridge.sh
index b79542a4dcc7..4a11bf1d514a 100755
--- a/tools/testing/selftests/drivers/net/mlxsw/rif_bridge.sh
+++ b/tools/testing/selftests/drivers/net/mlxsw/rif_bridge.sh
@@ -12,6 +12,7 @@ ALL_TESTS="
 	bridge_rif_remaster_port
 "
 
+REQUIRE_TEAMD="yes"
 NUM_NETIFS=2
 source $lib_dir/lib.sh
 source $lib_dir/devlink_lib.sh
diff --git a/tools/testing/selftests/drivers/net/mlxsw/rif_lag.sh b/tools/testing/selftests/drivers/net/mlxsw/rif_lag.sh
index e28f978104f3..b8bbe94f4736 100755
--- a/tools/testing/selftests/drivers/net/mlxsw/rif_lag.sh
+++ b/tools/testing/selftests/drivers/net/mlxsw/rif_lag.sh
@@ -10,6 +10,7 @@ ALL_TESTS="
 	lag_rif_nomaster_addr
 "
 
+REQUIRE_TEAMD="yes"
 NUM_NETIFS=2
 source $lib_dir/lib.sh
 source $lib_dir/devlink_lib.sh
diff --git a/tools/testing/selftests/drivers/net/mlxsw/rif_lag_vlan.sh b/tools/testing/selftests/drivers/net/mlxsw/rif_lag_vlan.sh
index 6318cfa6434c..d1a9d379eaf3 100755
--- a/tools/testing/selftests/drivers/net/mlxsw/rif_lag_vlan.sh
+++ b/tools/testing/selftests/drivers/net/mlxsw/rif_lag_vlan.sh
@@ -10,6 +10,7 @@ ALL_TESTS="
 	lag_rif_nomaster_addr
 "
 
+REQUIRE_TEAMD="yes"
 NUM_NETIFS=2
 source $lib_dir/lib.sh
 source $lib_dir/devlink_lib.sh
diff --git a/tools/testing/selftests/drivers/net/netcons_basic.sh b/tools/testing/selftests/drivers/net/netcons_basic.sh
index b175f4d966e5..fe765da498e8 100755
--- a/tools/testing/selftests/drivers/net/netcons_basic.sh
+++ b/tools/testing/selftests/drivers/net/netcons_basic.sh
@@ -18,224 +18,8 @@ set -euo pipefail
 
 SCRIPTDIR=$(dirname "$(readlink -e "${BASH_SOURCE[0]}")")
 
-# Simple script to test dynamic targets in netconsole
-SRCIF="" # to be populated later
-SRCIP=192.0.2.1
-DSTIF="" # to be populated later
-DSTIP=192.0.2.2
+source "${SCRIPTDIR}"/lib/sh/lib_netcons.sh
 
-PORT="6666"
-MSG="netconsole selftest"
-USERDATA_KEY="key"
-USERDATA_VALUE="value"
-TARGET=$(mktemp -u netcons_XXXXX)
-DEFAULT_PRINTK_VALUES=$(cat /proc/sys/kernel/printk)
-NETCONS_CONFIGFS="/sys/kernel/config/netconsole"
-NETCONS_PATH="${NETCONS_CONFIGFS}"/"${TARGET}"
-KEY_PATH="${NETCONS_PATH}/userdata/${USERDATA_KEY}"
-# NAMESPACE will be populated by setup_ns with a random value
-NAMESPACE=""
-
-# IDs for netdevsim
-NSIM_DEV_1_ID=$((256 + RANDOM % 256))
-NSIM_DEV_2_ID=$((512 + RANDOM % 256))
-NSIM_DEV_SYS_NEW="/sys/bus/netdevsim/new_device"
-
-# Used to create and delete namespaces
-source "${SCRIPTDIR}"/../../net/lib.sh
-source "${SCRIPTDIR}"/../../net/net_helper.sh
-
-# Create netdevsim interfaces
-create_ifaces() {
-
-	echo "$NSIM_DEV_2_ID" > "$NSIM_DEV_SYS_NEW"
-	echo "$NSIM_DEV_1_ID" > "$NSIM_DEV_SYS_NEW"
-	udevadm settle 2> /dev/null || true
-
-	local NSIM1=/sys/bus/netdevsim/devices/netdevsim"$NSIM_DEV_1_ID"
-	local NSIM2=/sys/bus/netdevsim/devices/netdevsim"$NSIM_DEV_2_ID"
-
-	# These are global variables
-	SRCIF=$(find "$NSIM1"/net -maxdepth 1 -type d ! \
-		-path "$NSIM1"/net -exec basename {} \;)
-	DSTIF=$(find "$NSIM2"/net -maxdepth 1 -type d ! \
-		-path "$NSIM2"/net -exec basename {} \;)
-}
-
-link_ifaces() {
-	local NSIM_DEV_SYS_LINK="/sys/bus/netdevsim/link_device"
-	local SRCIF_IFIDX=$(cat /sys/class/net/"$SRCIF"/ifindex)
-	local DSTIF_IFIDX=$(cat /sys/class/net/"$DSTIF"/ifindex)
-
-	exec {NAMESPACE_FD}</var/run/netns/"${NAMESPACE}"
-	exec {INITNS_FD}</proc/self/ns/net
-
-	# Bind the dst interface to namespace
-	ip link set "${DSTIF}" netns "${NAMESPACE}"
-
-	# Linking one device to the other one (on the other namespace}
-	if ! echo "${INITNS_FD}:$SRCIF_IFIDX $NAMESPACE_FD:$DSTIF_IFIDX"  > $NSIM_DEV_SYS_LINK
-	then
-		echo "linking netdevsim1 with netdevsim2 should succeed"
-		cleanup
-		exit "${ksft_skip}"
-	fi
-}
-
-function configure_ip() {
-	# Configure the IPs for both interfaces
-	ip netns exec "${NAMESPACE}" ip addr add "${DSTIP}"/24 dev "${DSTIF}"
-	ip netns exec "${NAMESPACE}" ip link set "${DSTIF}" up
-
-	ip addr add "${SRCIP}"/24 dev "${SRCIF}"
-	ip link set "${SRCIF}" up
-}
-
-function set_network() {
-	# setup_ns function is coming from lib.sh
-	setup_ns NAMESPACE
-
-	# Create both interfaces, and assign the destination to a different
-	# namespace
-	create_ifaces
-
-	# Link both interfaces back to back
-	link_ifaces
-
-	configure_ip
-}
-
-function create_dynamic_target() {
-	DSTMAC=$(ip netns exec "${NAMESPACE}" \
-		 ip link show "${DSTIF}" | awk '/ether/ {print $2}')
-
-	# Create a dynamic target
-	mkdir "${NETCONS_PATH}"
-
-	echo "${DSTIP}" > "${NETCONS_PATH}"/remote_ip
-	echo "${SRCIP}" > "${NETCONS_PATH}"/local_ip
-	echo "${DSTMAC}" > "${NETCONS_PATH}"/remote_mac
-	echo "${SRCIF}" > "${NETCONS_PATH}"/dev_name
-
-	echo 1 > "${NETCONS_PATH}"/enabled
-}
-
-function cleanup() {
-	local NSIM_DEV_SYS_DEL="/sys/bus/netdevsim/del_device"
-
-	# delete netconsole dynamic reconfiguration
-	echo 0 > "${NETCONS_PATH}"/enabled
-	# Remove key
-	rmdir "${KEY_PATH}"
-	# Remove the configfs entry
-	rmdir "${NETCONS_PATH}"
-
-	# Delete netdevsim devices
-	echo "$NSIM_DEV_2_ID" > "$NSIM_DEV_SYS_DEL"
-	echo "$NSIM_DEV_1_ID" > "$NSIM_DEV_SYS_DEL"
-
-	# this is coming from lib.sh
-	cleanup_all_ns
-
-	# Restoring printk configurations
-	echo "${DEFAULT_PRINTK_VALUES}" > /proc/sys/kernel/printk
-}
-
-function set_user_data() {
-	if [[ ! -d "${NETCONS_PATH}""/userdata" ]]
-	then
-		echo "Userdata path not available in ${NETCONS_PATH}/userdata"
-		exit "${ksft_skip}"
-	fi
-
-	mkdir -p "${KEY_PATH}"
-	VALUE_PATH="${KEY_PATH}""/value"
-	echo "${USERDATA_VALUE}" > "${VALUE_PATH}"
-}
-
-function listen_port_and_save_to() {
-	local OUTPUT=${1}
-	# Just wait for 2 seconds
-	timeout 2 ip netns exec "${NAMESPACE}" \
-		socat UDP-LISTEN:"${PORT}",fork "${OUTPUT}"
-}
-
-function validate_result() {
-	local TMPFILENAME="$1"
-
-	# TMPFILENAME will contain something like:
-	# 6.11.1-0_fbk0_rc13_509_g30d75cea12f7,13,1822,115075213798,-;netconsole selftest: netcons_gtJHM
-	#  key=value
-
-	# Check if the file exists
-	if [ ! -f "$TMPFILENAME" ]; then
-		echo "FAIL: File was not generated." >&2
-		exit "${ksft_fail}"
-	fi
-
-	if ! grep -q "${MSG}" "${TMPFILENAME}"; then
-		echo "FAIL: ${MSG} not found in ${TMPFILENAME}" >&2
-		cat "${TMPFILENAME}" >&2
-		exit "${ksft_fail}"
-	fi
-
-	if ! grep -q "${USERDATA_KEY}=${USERDATA_VALUE}" "${TMPFILENAME}"; then
-		echo "FAIL: ${USERDATA_KEY}=${USERDATA_VALUE} not found in ${TMPFILENAME}" >&2
-		cat "${TMPFILENAME}" >&2
-		exit "${ksft_fail}"
-	fi
-
-	# Delete the file once it is validated, otherwise keep it
-	# for debugging purposes
-	rm "${TMPFILENAME}"
-	exit "${ksft_pass}"
-}
-
-function check_for_dependencies() {
-	if [ "$(id -u)" -ne 0 ]; then
-		echo "This test must be run as root" >&2
-		exit "${ksft_skip}"
-	fi
-
-	if ! which socat > /dev/null ; then
-		echo "SKIP: socat(1) is not available" >&2
-		exit "${ksft_skip}"
-	fi
-
-	if ! which ip > /dev/null ; then
-		echo "SKIP: ip(1) is not available" >&2
-		exit "${ksft_skip}"
-	fi
-
-	if ! which udevadm > /dev/null ; then
-		echo "SKIP: udevadm(1) is not available" >&2
-		exit "${ksft_skip}"
-	fi
-
-	if [ ! -f "${NSIM_DEV_SYS_NEW}" ]; then
-		echo "SKIP: file ${NSIM_DEV_SYS_NEW} does not exist. Check if CONFIG_NETDEVSIM is enabled" >&2
-		exit "${ksft_skip}"
-	fi
-
-	if [ ! -d "${NETCONS_CONFIGFS}" ]; then
-		echo "SKIP: directory ${NETCONS_CONFIGFS} does not exist. Check if NETCONSOLE_DYNAMIC is enabled" >&2
-		exit "${ksft_skip}"
-	fi
-
-	if ip link show "${DSTIF}" 2> /dev/null; then
-		echo "SKIP: interface ${DSTIF} exists in the system. Not overwriting it." >&2
-		exit "${ksft_skip}"
-	fi
-
-	if ip addr list | grep -E "inet.*(${SRCIP}|${DSTIP})" 2> /dev/null; then
-		echo "SKIP: IPs already in use. Skipping it" >&2
-		exit "${ksft_skip}"
-	fi
-}
-
-# ========== #
-# Start here #
-# ========== #
 modprobe netdevsim 2> /dev/null || true
 modprobe netconsole 2> /dev/null || true
 
diff --git a/tools/testing/selftests/drivers/net/netcons_overflow.sh b/tools/testing/selftests/drivers/net/netcons_overflow.sh
new file mode 100755
index 000000000000..29bad56448a2
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/netcons_overflow.sh
@@ -0,0 +1,67 @@
+#!/usr/bin/env bash
+# SPDX-License-Identifier: GPL-2.0
+
+# This test verifies that users can successfully create up to
+# MAX_USERDATA_ITEMS userdata entries without encountering any failures.
+#
+# Additionally, it tests for expected failure when attempting to exceed this
+# maximum limit.
+#
+# Author: Breno Leitao <leitao@debian.org>
+
+set -euo pipefail
+
+SCRIPTDIR=$(dirname "$(readlink -e "${BASH_SOURCE[0]}")")
+
+source "${SCRIPTDIR}"/lib/sh/lib_netcons.sh
+# This is coming from netconsole code. Check for it in drivers/net/netconsole.c
+MAX_USERDATA_ITEMS=16
+
+# Function to create userdata entries
+function create_userdata_max_entries() {
+	# All these keys should be created without any error
+	for i in $(seq $MAX_USERDATA_ITEMS)
+	do
+		# USERDATA_KEY is used by set_user_data
+		USERDATA_KEY="key"${i}
+		set_user_data
+	done
+}
+
+# Function to verify the entry limit
+function verify_entry_limit() {
+	# Allowing the test to fail without exiting, since the next command
+	# will fail
+	set +e
+	mkdir "${NETCONS_PATH}/userdata/key_that_will_fail" 2> /dev/null
+	ret="$?"
+	set -e
+	if [ "$ret" -eq 0 ];
+	then
+		echo "Adding more than ${MAX_USERDATA_ITEMS} entries in userdata should fail, but it didn't" >&2
+		ls "${NETCONS_PATH}/userdata/" >&2
+		exit "${ksft_fail}"
+	fi
+}
+
+# ========== #
+# Start here #
+# ========== #
+
+modprobe netdevsim 2> /dev/null || true
+modprobe netconsole 2> /dev/null || true
+
+# Check for basic system dependency and exit if not found
+check_for_dependencies
+
+# Remove the namespace, interfaces and netconsole target on exit
+trap cleanup EXIT
+# Create one namespace and two interfaces
+set_network
+# Create a dynamic target for netconsole
+create_dynamic_target
+# populate the maximum number of supported keys in userdata
+create_userdata_max_entries
+# Verify an additional entry is not allowed
+verify_entry_limit
+exit "${ksft_pass}"
diff --git a/tools/testing/selftests/drivers/net/netdevsim/tc-mq-visibility.sh b/tools/testing/selftests/drivers/net/netdevsim/tc-mq-visibility.sh
index fd13c8cfb7a8..b411fe66510f 100755
--- a/tools/testing/selftests/drivers/net/netdevsim/tc-mq-visibility.sh
+++ b/tools/testing/selftests/drivers/net/netdevsim/tc-mq-visibility.sh
@@ -58,9 +58,12 @@ for root in mq mqprio; do
     ethtool -L $NDEV combined 4
     n_child_assert 4 "One real queue, rest default"
 
-    # Graft some
-    tcq replace parent 100:1 handle 204:
-    n_child_assert 3 "Grafted"
+    # Remove real one
+    tcq del parent 100:4 handle 204:
+
+    # Replace default with pfifo
+    tcq replace parent 100:1 handle 205: pfifo limit 1000
+    n_child_assert 3 "Deleting real one, replacing default one with pfifo"
 
     ethtool -L $NDEV combined 1
     n_child_assert 1 "Grafted, one"
diff --git a/tools/testing/selftests/drivers/net/netdevsim/udp_tunnel_nic.sh b/tools/testing/selftests/drivers/net/netdevsim/udp_tunnel_nic.sh
index 384cfa3d38a6..92c2f0376c08 100755
--- a/tools/testing/selftests/drivers/net/netdevsim/udp_tunnel_nic.sh
+++ b/tools/testing/selftests/drivers/net/netdevsim/udp_tunnel_nic.sh
@@ -142,7 +142,7 @@ function pre_ethtool {
 }
 
 function check_table {
-    local path=$NSIM_DEV_DFS/ports/$port/udp_ports_table$1
+    local path=$NSIM_DEV_DFS/ports/$port/udp_ports/table$1
     local -n expected=$2
     local last=$3
 
@@ -212,7 +212,7 @@ function check_tables {
 }
 
 function print_table {
-    local path=$NSIM_DEV_DFS/ports/$port/udp_ports_table$1
+    local path=$NSIM_DEV_DFS/ports/$port/udp_ports/table$1
     read -a have < $path
 
     tree $NSIM_DEV_DFS/
@@ -641,7 +641,7 @@ for port in 0 1; do
     NSIM_NETDEV=`get_netdev_name old_netdevs`
     ip link set dev $NSIM_NETDEV up
 
-    echo 110 > $NSIM_DEV_DFS/ports/$port/udp_ports_inject_error
+    echo 110 > $NSIM_DEV_DFS/ports/$port/udp_ports/inject_error
 
     msg="1 - create VxLANs v6"
     exp0=( 0 0 0 0 )
@@ -663,7 +663,7 @@ for port in 0 1; do
     new_geneve gnv0 20000
 
     msg="2 - destroy GENEVE"
-    echo 2 > $NSIM_DEV_DFS/ports/$port/udp_ports_inject_error
+    echo 2 > $NSIM_DEV_DFS/ports/$port/udp_ports/inject_error
     exp1=( `mke 20000 2` 0 0 0 )
     del_dev gnv0
 
@@ -764,7 +764,7 @@ for port in 0 1; do
     msg="create VxLANs v4"
     new_vxlan vxlan0 10000 $NSIM_NETDEV
 
-    echo 1 > $NSIM_DEV_DFS/ports/$port/udp_ports_reset
+    echo 1 > $NSIM_DEV_DFS/ports/$port/udp_ports/reset
     check_tables
 
     msg="NIC device goes down"
@@ -775,7 +775,7 @@ for port in 0 1; do
     fi
     check_tables
 
-    echo 1 > $NSIM_DEV_DFS/ports/$port/udp_ports_reset
+    echo 1 > $NSIM_DEV_DFS/ports/$port/udp_ports/reset
     check_tables
 
     msg="NIC device goes up again"
@@ -789,7 +789,7 @@ for port in 0 1; do
     del_dev vxlan0
     check_tables
 
-    echo 1 > $NSIM_DEV_DFS/ports/$port/udp_ports_reset
+    echo 1 > $NSIM_DEV_DFS/ports/$port/udp_ports/reset
     check_tables
 
     msg="destroy NIC"
@@ -896,7 +896,7 @@ msg="vacate VxLAN in overflow table"
 exp0=( `mke 10000 1` `mke 10004 1` 0 `mke 10003 1` )
 del_dev vxlan2
 
-echo 1 > $NSIM_DEV_DFS/ports/$port/udp_ports_reset
+echo 1 > $NSIM_DEV_DFS/ports/$port/udp_ports/reset
 check_tables
 
 msg="tunnels destroyed 2"
diff --git a/tools/testing/selftests/drivers/net/queues.py b/tools/testing/selftests/drivers/net/queues.py
index 30f29096e27c..38303da957ee 100755
--- a/tools/testing/selftests/drivers/net/queues.py
+++ b/tools/testing/selftests/drivers/net/queues.py
@@ -1,32 +1,37 @@
 #!/usr/bin/env python3
 # SPDX-License-Identifier: GPL-2.0
 
-from lib.py import ksft_run, ksft_exit, ksft_eq, KsftSkipEx
-from lib.py import EthtoolFamily, NetdevFamily
+from lib.py import ksft_disruptive, ksft_exit, ksft_run
+from lib.py import ksft_eq, ksft_raises, KsftSkipEx
+from lib.py import EthtoolFamily, NetdevFamily, NlError
 from lib.py import NetDrvEnv
-from lib.py import cmd
+from lib.py import cmd, defer, ip
+import errno
 import glob
 
 
-def sys_get_queues(ifname) -> int:
-    folders = glob.glob(f'/sys/class/net/{ifname}/queues/rx-*')
+def sys_get_queues(ifname, qtype='rx') -> int:
+    folders = glob.glob(f'/sys/class/net/{ifname}/queues/{qtype}-*')
     return len(folders)
 
 
-def nl_get_queues(cfg, nl):
+def nl_get_queues(cfg, nl, qtype='rx'):
     queues = nl.queue_get({'ifindex': cfg.ifindex}, dump=True)
     if queues:
-        return len([q for q in queues if q['type'] == 'rx'])
+        return len([q for q in queues if q['type'] == qtype])
     return None
 
 
 def get_queues(cfg, nl) -> None:
-    queues = nl_get_queues(cfg, nl)
-    if not queues:
-        raise KsftSkipEx('queue-get not supported by device')
+    snl = NetdevFamily(recv_size=4096)
 
-    expected = sys_get_queues(cfg.dev['ifname'])
-    ksft_eq(queues, expected)
+    for qtype in ['rx', 'tx']:
+        queues = nl_get_queues(cfg, snl, qtype)
+        if not queues:
+            raise KsftSkipEx('queue-get not supported by device')
+
+        expected = sys_get_queues(cfg.dev['ifname'], qtype)
+        ksft_eq(queues, expected)
 
 
 def addremove_queues(cfg, nl) -> None:
@@ -56,9 +61,27 @@ def addremove_queues(cfg, nl) -> None:
     ksft_eq(queues, expected)
 
 
+@ksft_disruptive
+def check_down(cfg, nl) -> None:
+    # Check the NAPI IDs before interface goes down and hides them
+    napis = nl.napi_get({'ifindex': cfg.ifindex}, dump=True)
+
+    ip(f"link set dev {cfg.dev['ifname']} down")
+    defer(ip, f"link set dev {cfg.dev['ifname']} up")
+
+    with ksft_raises(NlError) as cm:
+        nl.queue_get({'ifindex': cfg.ifindex, 'id': 0, 'type': 'rx'})
+    ksft_eq(cm.exception.nl_msg.error, -errno.ENOENT)
+
+    if napis:
+        with ksft_raises(NlError) as cm:
+            nl.napi_get({'id': napis[0]['id']})
+        ksft_eq(cm.exception.nl_msg.error, -errno.ENOENT)
+
+
 def main() -> None:
-    with NetDrvEnv(__file__, queue_count=3) as cfg:
-        ksft_run([get_queues, addremove_queues], args=(cfg, NetdevFamily()))
+    with NetDrvEnv(__file__, queue_count=100) as cfg:
+        ksft_run([get_queues, addremove_queues, check_down], args=(cfg, NetdevFamily()))
     ksft_exit()
 
 
diff --git a/tools/testing/selftests/drivers/net/stats.py b/tools/testing/selftests/drivers/net/stats.py
index 63e3c045a3b2..efcc1e10575b 100755
--- a/tools/testing/selftests/drivers/net/stats.py
+++ b/tools/testing/selftests/drivers/net/stats.py
@@ -2,12 +2,15 @@
 # SPDX-License-Identifier: GPL-2.0
 
 import errno
+import subprocess
+import time
 from lib.py import ksft_run, ksft_exit, ksft_pr
-from lib.py import ksft_ge, ksft_eq, ksft_in, ksft_true, ksft_raises, KsftSkipEx, KsftXfailEx
+from lib.py import ksft_ge, ksft_eq, ksft_is, ksft_in, ksft_lt, ksft_true, ksft_raises
+from lib.py import KsftSkipEx, KsftXfailEx
 from lib.py import ksft_disruptive
 from lib.py import EthtoolFamily, NetdevFamily, RtnlFamily, NlError
 from lib.py import NetDrvEnv
-from lib.py import ip, defer
+from lib.py import cmd, ip, defer
 
 ethnl = EthtoolFamily()
 netfam = NetdevFamily()
@@ -110,6 +113,23 @@ def qstat_by_ifindex(cfg) -> None:
             ksft_ge(triple[1][key], triple[0][key], comment="bad key: " + key)
             ksft_ge(triple[2][key], triple[1][key], comment="bad key: " + key)
 
+    # Sanity check the dumps
+    queues = NetdevFamily(recv_size=4096).qstats_get({"scope": "queue"}, dump=True)
+    # Reformat the output into {ifindex: {rx: [id, id, ...], tx: [id, id, ...]}}
+    parsed = {}
+    for entry in queues:
+        ifindex = entry["ifindex"]
+        if ifindex not in parsed:
+            parsed[ifindex] = {"rx":[], "tx": []}
+        parsed[ifindex][entry["queue-type"]].append(entry['queue-id'])
+    # Now, validate
+    for ifindex, queues in parsed.items():
+        for qtype in ['rx', 'tx']:
+            ksft_eq(len(queues[qtype]), len(set(queues[qtype])),
+                    comment="repeated queue keys")
+            ksft_eq(len(queues[qtype]), max(queues[qtype]) + 1,
+                    comment="missing queue keys")
+
     # Test invalid dumps
     # 0 is invalid
     with ksft_raises(NlError) as cm:
@@ -157,10 +177,95 @@ def check_down(cfg) -> None:
     netfam.qstats_get({"ifindex": cfg.ifindex, "scope": "queue"}, dump=True)
 
 
+def __run_inf_loop(body):
+    body = body.strip()
+    if body[-1] != ';':
+        body += ';'
+
+    return subprocess.Popen(f"while true; do {body} done", shell=True,
+                            stdout=subprocess.PIPE, stderr=subprocess.PIPE)
+
+
+def __stats_increase_sanely(old, new) -> None:
+    for k in old.keys():
+        ksft_ge(new[k], old[k])
+        ksft_lt(new[k] - old[k], 1 << 31, comment="likely wrapping error")
+
+
+def procfs_hammer(cfg) -> None:
+    """
+    Reading stats via procfs only holds the RCU lock, which is not an exclusive
+    lock, make sure drivers can handle parallel reads of stats.
+    """
+    one = __run_inf_loop("cat /proc/net/dev")
+    defer(one.kill)
+    two = __run_inf_loop("cat /proc/net/dev")
+    defer(two.kill)
+
+    time.sleep(1)
+    # Make sure the processes are running
+    ksft_is(one.poll(), None)
+    ksft_is(two.poll(), None)
+
+    rtstat1 = rtnl.getlink({"ifi-index": cfg.ifindex})['stats64']
+    time.sleep(2)
+    rtstat2 = rtnl.getlink({"ifi-index": cfg.ifindex})['stats64']
+    __stats_increase_sanely(rtstat1, rtstat2)
+    # defers will kill the loops
+
+
+@ksft_disruptive
+def procfs_downup_hammer(cfg) -> None:
+    """
+    Reading stats via procfs only holds the RCU lock, drivers often try
+    to sleep when reading the stats, or don't protect against races.
+    """
+    # Max out the queues, we'll flip between max and 1
+    channels = ethnl.channels_get({'header': {'dev-index': cfg.ifindex}})
+    if channels['combined-count'] == 0:
+        rx_type = 'rx'
+    else:
+        rx_type = 'combined'
+    cur_queue_cnt = channels[f'{rx_type}-count']
+    max_queue_cnt = channels[f'{rx_type}-max']
+
+    cmd(f"ethtool -L {cfg.ifname} {rx_type} {max_queue_cnt}")
+    defer(cmd, f"ethtool -L {cfg.ifname} {rx_type} {cur_queue_cnt}")
+
+    # Real test stats
+    stats = __run_inf_loop("cat /proc/net/dev")
+    defer(stats.kill)
+
+    ipset = f"ip link set dev {cfg.ifname}"
+    defer(ip, f"link set dev {cfg.ifname} up")
+    # The "echo -n 1" lets us count iterations below
+    updown = f"{ipset} down; sleep 0.05; {ipset} up; sleep 0.05; " + \
+             f"ethtool -L {cfg.ifname} {rx_type} 1; " + \
+             f"ethtool -L {cfg.ifname} {rx_type} {max_queue_cnt}; " + \
+              "echo -n 1"
+    updown = __run_inf_loop(updown)
+    kill_updown = defer(updown.kill)
+
+    time.sleep(1)
+    # Make sure the processes are running
+    ksft_is(stats.poll(), None)
+    ksft_is(updown.poll(), None)
+
+    rtstat1 = rtnl.getlink({"ifi-index": cfg.ifindex})['stats64']
+    # We're looking for crashes, give it extra time
+    time.sleep(9)
+    rtstat2 = rtnl.getlink({"ifi-index": cfg.ifindex})['stats64']
+    __stats_increase_sanely(rtstat1, rtstat2)
+
+    kill_updown.exec()
+    stdout, _ = updown.communicate(timeout=5)
+    ksft_pr("completed up/down cycles:", len(stdout.decode('utf-8')))
+
+
 def main() -> None:
-    with NetDrvEnv(__file__) as cfg:
+    with NetDrvEnv(__file__, queue_count=100) as cfg:
         ksft_run([check_pause, check_fec, pkt_byte_sum, qstat_by_ifindex,
-                  check_down],
+                  check_down, procfs_hammer, procfs_downup_hammer],
                  args=(cfg, ))
     ksft_exit()