Merge tag 'nand/for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux into mtd/next

NAND core changes:
- use longest matching pattern in ->exec_op() default parser
- export NAND operation tracer
- add flag to indicate panic_write in MTD
- use kzalloc() instead of kmalloc() and memset()

Raw NAND controller drivers changes:
- brcmnand:
  * fix BCH ECC layout for large page NAND parts
  * fallback to detected ecc-strength, ecc-step-size
  * when oops in progress use pio and interrupt polling
  * code refactor code to introduce helper functions
  * add support for v7.3 controller
- FSMC:
  * use nand_op_trace for operation tracing
- GPMI:
  * move all driver code into single file
  * various cleanups (including dmaengine changes)
  * use runtime PM to manage clocks
  * implement exec_op
- MTK:
  * correct low level time calculation of r/w cycle
  * improve data sampling timing for read cycle
  * add validity check for CE# pin setting
  * fix wrongly assigned OOB buffer pointer issue
  * re-license MTK NAND driver as Dual MIT/GPL
- STM32:
  * manage the get_irq error case
  * increase DMA completion timeouts

Raw NAND chips drivers changes:
- Macronix: add read-retry support

Onenand driver changes:
- add support for 8Gb datasize chips
- avoid fall-through warnings

SPI-NAND changes:
- define macros for page-read ops with three-byte addresses
- add support for two-byte device IDs and then for GigaDevice
  GD5F1GQ4UFxxG
- add initial support for Paragon PN26G0xA
- handle the case where the last page read has bitflips

9 files changed, 73 insertions, 49 deletions

diff --git a/net/dsa/Kconfig b/net/dsa/Kconfig
index cf855352a440..d449f78c1bd0 100644
--- a/net/dsa/Kconfig
+++ b/net/dsa/Kconfig
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
 config HAVE_NET_DSA
 	def_bool y
 	depends on INET && NETDEVICES && !S390
diff --git a/net/dsa/dsa.c b/net/dsa/dsa.c
index 1fc782fab393..43120a3fb06f 100644
--- a/net/dsa/dsa.c
+++ b/net/dsa/dsa.c
@@ -1,12 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * net/dsa/dsa.c - Hardware switch handling
  * Copyright (c) 2008-2009 Marvell Semiconductor
  * Copyright (c) 2013 Florian Fainelli <florian@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
  */
 
 #include <linux/device.h>
diff --git a/net/dsa/dsa2.c b/net/dsa/dsa2.c
index 3b5f434cad3f..820dd8da57fc 100644
--- a/net/dsa/dsa2.c
+++ b/net/dsa/dsa2.c
@@ -1,13 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * net/dsa/dsa2.c - Hardware switch handling, binding version 2
  * Copyright (c) 2008-2009 Marvell Semiconductor
  * Copyright (c) 2013 Florian Fainelli <florian@openwrt.org>
  * Copyright (c) 2016 Andrew Lunn <andrew@lunn.ch>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
  */
 
 #include <linux/device.h>
diff --git a/net/dsa/dsa_priv.h b/net/dsa/dsa_priv.h
index 8f1222324646..3986cedfafc0 100644
--- a/net/dsa/dsa_priv.h
+++ b/net/dsa/dsa_priv.h
@@ -1,11 +1,7 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
 /*
  * net/dsa/dsa_priv.h - Hardware switch handling
  * Copyright (c) 2008-2009 Marvell Semiconductor
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
  */
 
 #ifndef __DSA_PRIV_H
diff --git a/net/dsa/master.c b/net/dsa/master.c
index c58f33931be1..4b52f8bac5e1 100644
--- a/net/dsa/master.c
+++ b/net/dsa/master.c
@@ -1,13 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * Handling of a master device, switching frames via its switch fabric CPU port
  *
  * Copyright (c) 2017 Savoir-faire Linux Inc.
  *	Vivien Didelot <vivien.didelot@savoirfairelinux.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
  */
 
 #include "dsa_priv.h"
diff --git a/net/dsa/port.c b/net/dsa/port.c
index ed8ba9daa3ba..363eab6df51b 100644
--- a/net/dsa/port.c
+++ b/net/dsa/port.c
@@ -1,13 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * Handling of a single switch port
  *
  * Copyright (c) 2017 Savoir-faire Linux Inc.
  *	Vivien Didelot <vivien.didelot@savoirfairelinux.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
  */
 
 #include <linux/if_bridge.h>
diff --git a/net/dsa/slave.c b/net/dsa/slave.c
index 9892ca1f6859..8157be7e162d 100644
--- a/net/dsa/slave.c
+++ b/net/dsa/slave.c
@@ -1,11 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * net/dsa/slave.c - Slave device handling
  * Copyright (c) 2008-2009 Marvell Semiconductor
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
  */
 
 #include <linux/list.h>
diff --git a/net/dsa/switch.c b/net/dsa/switch.c
index 7d8cd9bc0ecc..4ec5b7f85d51 100644
--- a/net/dsa/switch.c
+++ b/net/dsa/switch.c
@@ -1,13 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * Handling of a single switch chip, part of a switch fabric
  *
  * Copyright (c) 2017 Savoir-faire Linux Inc.
  *	Vivien Didelot <vivien.didelot@savoirfairelinux.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
  */
 
 #include <linux/if_bridge.h>
diff --git a/net/dsa/tag_8021q.c b/net/dsa/tag_8021q.c
index 8ae48c7e1e76..65a35e976d7b 100644
--- a/net/dsa/tag_8021q.c
+++ b/net/dsa/tag_8021q.c
@@ -11,20 +11,59 @@
 
 #include "dsa_priv.h"
 
-/* Allocating two VLAN tags per port - one for the RX VID and
- * the other for the TX VID - see below
+/* Binary structure of the fake 12-bit VID field (when the TPID is
+ * ETH_P_DSA_8021Q):
+ *
+ * | 11  | 10  |  9  |  8  |  7  |  6  |  5  |  4  |  3  |  2  |  1  |  0  |
+ * +-----------+-----+-----------------+-----------+-----------------------+
+ * |    DIR    | RSV |    SWITCH_ID    |    RSV    |          PORT         |
+ * +-----------+-----+-----------------+-----------+-----------------------+
+ *
+ * DIR - VID[11:10]:
+ *	Direction flags.
+ *	* 1 (0b01) for RX VLAN,
+ *	* 2 (0b10) for TX VLAN.
+ *	These values make the special VIDs of 0, 1 and 4095 to be left
+ *	unused by this coding scheme.
+ *
+ * RSV - VID[9]:
+ *	To be used for further expansion of SWITCH_ID or for other purposes.
+ *
+ * SWITCH_ID - VID[8:6]:
+ *	Index of switch within DSA tree. Must be between 0 and
+ *	DSA_MAX_SWITCHES - 1.
+ *
+ * RSV - VID[5:4]:
+ *	To be used for further expansion of PORT or for other purposes.
+ *
+ * PORT - VID[3:0]:
+ *	Index of switch port. Must be between 0 and DSA_MAX_PORTS - 1.
  */
-#define DSA_8021Q_VID_RANGE	(DSA_MAX_SWITCHES * DSA_MAX_PORTS)
-#define DSA_8021Q_VID_BASE	(VLAN_N_VID - 2 * DSA_8021Q_VID_RANGE - 1)
-#define DSA_8021Q_RX_VID_BASE	(DSA_8021Q_VID_BASE)
-#define DSA_8021Q_TX_VID_BASE	(DSA_8021Q_VID_BASE + DSA_8021Q_VID_RANGE)
+
+#define DSA_8021Q_DIR_SHIFT		10
+#define DSA_8021Q_DIR_MASK		GENMASK(11, 10)
+#define DSA_8021Q_DIR(x)		(((x) << DSA_8021Q_DIR_SHIFT) & \
+						 DSA_8021Q_DIR_MASK)
+#define DSA_8021Q_DIR_RX		DSA_8021Q_DIR(1)
+#define DSA_8021Q_DIR_TX		DSA_8021Q_DIR(2)
+
+#define DSA_8021Q_SWITCH_ID_SHIFT	6
+#define DSA_8021Q_SWITCH_ID_MASK	GENMASK(8, 6)
+#define DSA_8021Q_SWITCH_ID(x)		(((x) << DSA_8021Q_SWITCH_ID_SHIFT) & \
+						 DSA_8021Q_SWITCH_ID_MASK)
+
+#define DSA_8021Q_PORT_SHIFT		0
+#define DSA_8021Q_PORT_MASK		GENMASK(3, 0)
+#define DSA_8021Q_PORT(x)		(((x) << DSA_8021Q_PORT_SHIFT) & \
+						 DSA_8021Q_PORT_MASK)
 
 /* Returns the VID to be inserted into the frame from xmit for switch steering
  * instructions on egress. Encodes switch ID and port ID.
  */
 u16 dsa_8021q_tx_vid(struct dsa_switch *ds, int port)
 {
-	return DSA_8021Q_TX_VID_BASE + (DSA_MAX_PORTS * ds->index) + port;
+	return DSA_8021Q_DIR_TX | DSA_8021Q_SWITCH_ID(ds->index) |
+	       DSA_8021Q_PORT(port);
 }
 EXPORT_SYMBOL_GPL(dsa_8021q_tx_vid);
 
@@ -33,21 +72,22 @@ EXPORT_SYMBOL_GPL(dsa_8021q_tx_vid);
  */
 u16 dsa_8021q_rx_vid(struct dsa_switch *ds, int port)
 {
-	return DSA_8021Q_RX_VID_BASE + (DSA_MAX_PORTS * ds->index) + port;
+	return DSA_8021Q_DIR_RX | DSA_8021Q_SWITCH_ID(ds->index) |
+	       DSA_8021Q_PORT(port);
 }
 EXPORT_SYMBOL_GPL(dsa_8021q_rx_vid);
 
 /* Returns the decoded switch ID from the RX VID. */
 int dsa_8021q_rx_switch_id(u16 vid)
 {
-	return ((vid - DSA_8021Q_RX_VID_BASE) / DSA_MAX_PORTS);
+	return (vid & DSA_8021Q_SWITCH_ID_MASK) >> DSA_8021Q_SWITCH_ID_SHIFT;
 }
 EXPORT_SYMBOL_GPL(dsa_8021q_rx_switch_id);
 
 /* Returns the decoded port ID from the RX VID. */
 int dsa_8021q_rx_source_port(u16 vid)
 {
-	return ((vid - DSA_8021Q_RX_VID_BASE) % DSA_MAX_PORTS);
+	return (vid & DSA_8021Q_PORT_MASK) >> DSA_8021Q_PORT_SHIFT;
 }
 EXPORT_SYMBOL_GPL(dsa_8021q_rx_source_port);
 
@@ -128,10 +168,7 @@ int dsa_port_setup_8021q_tagging(struct dsa_switch *ds, int port, bool enabled)
 		u16 flags;
 
 		if (i == upstream)
-			/* CPU port needs to see this port's RX VID
-			 * as tagged egress.
-			 */
-			flags = 0;
+			continue;
 		else if (i == port)
 			/* The RX VID is pvid on this port */
 			flags = BRIDGE_VLAN_INFO_UNTAGGED |
@@ -150,6 +187,20 @@ int dsa_port_setup_8021q_tagging(struct dsa_switch *ds, int port, bool enabled)
 			return err;
 		}
 	}
+
+	/* CPU port needs to see this port's RX VID
+	 * as tagged egress.
+	 */
+	if (enabled)
+		err = dsa_port_vid_add(upstream_dp, rx_vid, 0);
+	else
+		err = dsa_port_vid_del(upstream_dp, rx_vid);
+	if (err) {
+		dev_err(ds->dev, "Failed to apply RX VID %d to port %d: %d\n",
+			rx_vid, port, err);
+		return err;
+	}
+
 	/* Finally apply the TX VID on this port and on the CPU port */
 	if (enabled)
 		err = dsa_port_vid_add(dp, tx_vid, BRIDGE_VLAN_INFO_UNTAGGED);