Add bridged amplifiers to cs42l43

Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>:

In some cs42l43 systems a couple of cs35l56 amplifiers are attached
to the cs42l43's SPI and I2S. On Windows the cs42l43 is controlled
by a SDCA class driver and these two amplifiers are controlled by
firmware running on the cs42l43. However, under Linux the decision
was made to interact with the cs42l43 directly, affording the user
greater control over the audio system. However, this has resulted
in an issue where these two bridged cs35l56 amplifiers are not
populated in ACPI and must be added manually. There is at least an
SDCA extension unit DT entry we can key off.

The process of adding this is handled using a software node, firstly the
ability to add native chip selects to software nodes must be added.
Secondly, an additional flag for naming the SPI devices is added this
allows the machine driver to key to the correct amplifier. Then finally,
the cs42l43 SPI driver adds the two amplifiers directly onto its SPI
bus.

An additional series will follow soon to add the audio machine driver
parts (in the sof-sdw driver), however that is fairly orthogonal to
this part of the process, getting the actual amplifiers registered.

1 files changed, 11 insertions, 11 deletions

diff --git a/kernel/time/timer.c b/kernel/time/timer.c
index dee29f1f5b75..3baf2fbe6848 100644
--- a/kernel/time/timer.c
+++ b/kernel/time/timer.c
@@ -64,15 +64,15 @@ EXPORT_SYMBOL(jiffies_64);
 
 /*
  * The timer wheel has LVL_DEPTH array levels. Each level provides an array of
- * LVL_SIZE buckets. Each level is driven by its own clock and therefor each
+ * LVL_SIZE buckets. Each level is driven by its own clock and therefore each
  * level has a different granularity.
  *
- * The level granularity is:		LVL_CLK_DIV ^ lvl
+ * The level granularity is:		LVL_CLK_DIV ^ level
  * The level clock frequency is:	HZ / (LVL_CLK_DIV ^ level)
  *
  * The array level of a newly armed timer depends on the relative expiry
  * time. The farther the expiry time is away the higher the array level and
- * therefor the granularity becomes.
+ * therefore the granularity becomes.
  *
  * Contrary to the original timer wheel implementation, which aims for 'exact'
  * expiry of the timers, this implementation removes the need for recascading
@@ -207,7 +207,7 @@ EXPORT_SYMBOL(jiffies_64);
  * struct timer_base - Per CPU timer base (number of base depends on config)
  * @lock:		Lock protecting the timer_base
  * @running_timer:	When expiring timers, the lock is dropped. To make
- *			sure not to race agains deleting/modifying a
+ *			sure not to race against deleting/modifying a
  *			currently running timer, the pointer is set to the
  *			timer, which expires at the moment. If no timer is
  *			running, the pointer is NULL.
@@ -737,7 +737,7 @@ static bool timer_is_static_object(void *addr)
 }
 
 /*
- * fixup_init is called when:
+ * timer_fixup_init is called when:
  * - an active object is initialized
  */
 static bool timer_fixup_init(void *addr, enum debug_obj_state state)
@@ -761,7 +761,7 @@ static void stub_timer(struct timer_list *unused)
 }
 
 /*
- * fixup_activate is called when:
+ * timer_fixup_activate is called when:
  * - an active object is activated
  * - an unknown non-static object is activated
  */
@@ -783,7 +783,7 @@ static bool timer_fixup_activate(void *addr, enum debug_obj_state state)
 }
 
 /*
- * fixup_free is called when:
+ * timer_fixup_free is called when:
  * - an active object is freed
  */
 static bool timer_fixup_free(void *addr, enum debug_obj_state state)
@@ -801,7 +801,7 @@ static bool timer_fixup_free(void *addr, enum debug_obj_state state)
 }
 
 /*
- * fixup_assert_init is called when:
+ * timer_fixup_assert_init is called when:
  * - an untracked/uninit-ed object is found
  */
 static bool timer_fixup_assert_init(void *addr, enum debug_obj_state state)
@@ -914,7 +914,7 @@ static void do_init_timer(struct timer_list *timer,
  * @key: lockdep class key of the fake lock used for tracking timer
  *       sync lock dependencies
  *
- * init_timer_key() must be done to a timer prior calling *any* of the
+ * init_timer_key() must be done to a timer prior to calling *any* of the
  * other timer functions.
  */
 void init_timer_key(struct timer_list *timer,
@@ -1417,7 +1417,7 @@ static int __timer_delete(struct timer_list *timer, bool shutdown)
 	 * If @shutdown is set then the lock has to be taken whether the
 	 * timer is pending or not to protect against a concurrent rearm
 	 * which might hit between the lockless pending check and the lock
-	 * aquisition. By taking the lock it is ensured that such a newly
+	 * acquisition. By taking the lock it is ensured that such a newly
 	 * enqueued timer is dequeued and cannot end up with
 	 * timer->function == NULL in the expiry code.
 	 *
@@ -2306,7 +2306,7 @@ static inline u64 __get_next_timer_interrupt(unsigned long basej, u64 basem,
 
 		/*
 		 * When timer base is not set idle, undo the effect of
-		 * tmigr_cpu_deactivate() to prevent inconsitent states - active
+		 * tmigr_cpu_deactivate() to prevent inconsistent states - active
 		 * timer base but inactive timer migration hierarchy.
 		 *
 		 * When timer base was already marked idle, nothing will be