Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (37 commits)
  SH: catch negative denormal_subf1() retval in denormal_add()
  sh: Fix DMAC base address for SH7709S
  sh: update smc91x platform data for se7206.
  sh: Stub in cpu_to_node() and friends for NUMA build.
  sh: intc register modify fix
  sh: no high level trigger on some sh3 cpus
  sh: clean up sh7710 and sh7720 intc tables
  sh: add interrupt ack code to sh3
  sh: unify external irq pin code for sh3
  sh-sci: avoid writing to nonexistent registers
  sh-sci: sh7722 lacks scsptr registers
  sh-sci: improve sh7722 support
  sh: reset hardware from early printk
  sh: drain and wait for early printk
  sh: use sci_out() for early printk
  sh: add memory resources to /proc/iomem
  sh: add kernel bss resource
  sh: fix sh7705 interrupt vector typo
  sh: update smc91x platform data for se7722
  sh: update smc91x platform data for MigoR
  ...

17 files changed, 59 insertions, 675 deletions

diff --git a/include/asm-sh/cpu-sh3/dma.h b/include/asm-sh/cpu-sh3/dma.h
index 092ff9d872c3..6813c3220a1d 100644
--- a/include/asm-sh/cpu-sh3/dma.h
+++ b/include/asm-sh/cpu-sh3/dma.h
@@ -3,19 +3,19 @@
 
 
 #if defined(CONFIG_CPU_SUBTYPE_SH7720) || \
-    defined(CONFIG_CPU_SUBTYPE_SH7721) || \
-    defined(CONFIG_CPU_SUBTYPE_SH7709)
+    defined(CONFIG_CPU_SUBTYPE_SH7721)
 #define SH_DMAC_BASE	0xa4010020
+#else
+#define SH_DMAC_BASE	0xa4000020
+#endif
 
+#if defined(CONFIG_CPU_SUBTYPE_SH7720) || defined(CONFIG_CPU_SUBTYPE_SH7709)
 #define DMTE0_IRQ	48
 #define DMTE1_IRQ	49
 #define DMTE2_IRQ	50
 #define DMTE3_IRQ	51
 #define DMTE4_IRQ	76
 #define DMTE5_IRQ	77
-
-#else
-#define SH_DMAC_BASE	0xa4000020
 #endif
 
 /* Definitions for the SuperH DMAC */
diff --git a/include/asm-sh/hw_irq.h b/include/asm-sh/hw_irq.h
index c958fdaa0095..7438d1e21bc9 100644
--- a/include/asm-sh/hw_irq.h
+++ b/include/asm-sh/hw_irq.h
@@ -79,6 +79,10 @@ struct intc_desc {
 	struct intc_sense_reg *sense_regs;
 	unsigned int nr_sense_regs;
 	char *name;
+#ifdef CONFIG_CPU_SH3
+	struct intc_mask_reg *ack_regs;
+	unsigned int nr_ack_regs;
+#endif
 };
 
 #define _INTC_ARRAY(a) a, sizeof(a)/sizeof(*a)
@@ -91,10 +95,25 @@ struct intc_desc symbol __initdata = {					\
 	chipname,							\
 }
 
+#ifdef CONFIG_CPU_SH3
+#define DECLARE_INTC_DESC_ACK(symbol, chipname, vectors, groups,	\
+	mask_regs, prio_regs, sense_regs, ack_regs)			\
+struct intc_desc symbol __initdata = {					\
+	_INTC_ARRAY(vectors), _INTC_ARRAY(groups),			\
+	_INTC_ARRAY(mask_regs), _INTC_ARRAY(prio_regs),			\
+	_INTC_ARRAY(sense_regs),					\
+	chipname,							\
+	_INTC_ARRAY(ack_regs),						\
+}
+#endif
+
 void __init register_intc_controller(struct intc_desc *desc);
 int intc_set_priority(unsigned int irq, unsigned int prio);
 
 void __init plat_irq_setup(void);
+#ifdef CONFIG_CPU_SH3
+void __init plat_irq_setup_sh3(void);
+#endif
 
 enum { IRQ_MODE_IRQ, IRQ_MODE_IRQ7654, IRQ_MODE_IRQ3210,
        IRQ_MODE_IRL7654_MASK, IRQ_MODE_IRL3210_MASK,
diff --git a/include/asm-sh/io.h b/include/asm-sh/io.h
index 356e50d06745..a4fbf0c84fb1 100644
--- a/include/asm-sh/io.h
+++ b/include/asm-sh/io.h
@@ -268,11 +268,6 @@ unsigned long long peek_real_address_q(unsigned long long addr);
 unsigned long long poke_real_address_q(unsigned long long addr,
 				       unsigned long long val);
 
-/* arch/sh/mm/ioremap_64.c */
-unsigned long onchip_remap(unsigned long addr, unsigned long size,
-			   const char *name);
-extern void onchip_unmap(unsigned long vaddr);
-
 #if !defined(CONFIG_MMU)
 #define virt_to_phys(address)	((unsigned long)(address))
 #define phys_to_virt(address)	((void *)(address))
@@ -302,9 +297,16 @@ extern void onchip_unmap(unsigned long vaddr);
 void __iomem *__ioremap(unsigned long offset, unsigned long size,
 			unsigned long flags);
 void __iounmap(void __iomem *addr);
+
+/* arch/sh/mm/ioremap_64.c */
+unsigned long onchip_remap(unsigned long addr, unsigned long size,
+			   const char *name);
+extern void onchip_unmap(unsigned long vaddr);
 #else
 #define __ioremap(offset, size, flags)	((void __iomem *)(offset))
 #define __iounmap(addr)			do { } while (0)
+#define onchip_remap(addr, size, name)	(addr)
+#define onchip_unmap(addr)		do { } while (0)
 #endif /* CONFIG_MMU */
 
 static inline void __iomem *
diff --git a/include/asm-sh/keyboard.h b/include/asm-sh/keyboard.h
deleted file mode 100644
index 31dcc4fa5f28..000000000000
--- a/include/asm-sh/keyboard.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef	__ASM_SH_KEYBOARD_H
-#define	__ASM_SH_KEYBOARD_H
-/*
- *	$Id: keyboard.h,v 1.1.1.1 2001/10/15 20:45:09 mrbrown Exp $
- */
-
-#include <linux/kd.h>
-#include <asm/machvec.h>
-
-#ifdef CONFIG_SH_MPC1211
-#include <asm/mpc1211/keyboard-mpc1211.h>
-#endif
-#endif
diff --git a/include/asm-sh/mmu_context.h b/include/asm-sh/mmu_context.h
index fe58d00b250c..87e812f68bb0 100644
--- a/include/asm-sh/mmu_context.h
+++ b/include/asm-sh/mmu_context.h
@@ -27,6 +27,7 @@
 /* ASID is 8-bit value, so it can't be 0x100 */
 #define MMU_NO_ASID			0x100
 
+#ifdef CONFIG_MMU
 #define asid_cache(cpu)		(cpu_data[cpu].asid_cache)
 #define cpu_context(cpu, mm)	((mm)->context.id[cpu])
 
@@ -38,7 +39,6 @@
  */
 #define MMU_VPN_MASK	0xfffff000
 
-#ifdef CONFIG_MMU
 #if defined(CONFIG_SUPERH32)
 #include "mmu_context_32.h"
 #else
@@ -129,6 +129,8 @@ static inline void switch_mm(struct mm_struct *prev,
 #define destroy_context(mm)		do { } while (0)
 #define set_asid(asid)			do { } while (0)
 #define get_asid()			(0)
+#define cpu_asid(cpu, mm)		({ (void)cpu; 0; })
+#define switch_and_save_asid(asid)	(0)
 #define set_TTB(pgd)			do { } while (0)
 #define get_TTB()			(0)
 #define activate_context(mm,cpu)	do { } while (0)
diff --git a/include/asm-sh/mmzone.h b/include/asm-sh/mmzone.h
index 7969f381dff2..2969253c4042 100644
--- a/include/asm-sh/mmzone.h
+++ b/include/asm-sh/mmzone.h
@@ -41,6 +41,8 @@ void __init plat_mem_setup(void);
 
 /* arch/sh/kernel/setup.c */
 void __init setup_bootmem_allocator(unsigned long start_pfn);
+void __init __add_active_range(unsigned int nid, unsigned long start_pfn,
+			       unsigned long end_pfn);
 
 #endif /* __KERNEL__ */
 #endif /* __ASM_SH_MMZONE_H */
diff --git a/include/asm-sh/mpc1211/dma.h b/include/asm-sh/mpc1211/dma.h
deleted file mode 100644
index e506d1aaa0d0..000000000000
--- a/include/asm-sh/mpc1211/dma.h
+++ /dev/null
@@ -1,303 +0,0 @@
-/* $Id: dma.h,v 1.7 1992/12/14 00:29:34 root Exp root $
- * linux/include/asm/dma.h: Defines for using and allocating dma channels.
- * Written by Hennus Bergman, 1992.
- * High DMA channel support & info by Hannu Savolainen
- * and John Boyd, Nov. 1992.
- */
-
-#ifndef _ASM_MPC1211_DMA_H
-#define _ASM_MPC1211_DMA_H
-
-#include <linux/spinlock.h>	/* And spinlocks */
-#include <asm/io.h>		/* need byte IO */
-#include <linux/delay.h>
-
-
-#ifdef HAVE_REALLY_SLOW_DMA_CONTROLLER
-#define dma_outb	outb_p
-#else
-#define dma_outb	outb
-#endif
-
-#define dma_inb		inb
-
-/*
- * NOTES about DMA transfers:
- *
- *  controller 1: channels 0-3, byte operations, ports 00-1F
- *  controller 2: channels 4-7, word operations, ports C0-DF
- *
- *  - ALL registers are 8 bits only, regardless of transfer size
- *  - channel 4 is not used - cascades 1 into 2.
- *  - channels 0-3 are byte - addresses/counts are for physical bytes
- *  - channels 5-7 are word - addresses/counts are for physical words
- *  - transfers must not cross physical 64K (0-3) or 128K (5-7) boundaries
- *  - transfer count loaded to registers is 1 less than actual count
- *  - controller 2 offsets are all even (2x offsets for controller 1)
- *  - page registers for 5-7 don't use data bit 0, represent 128K pages
- *  - page registers for 0-3 use bit 0, represent 64K pages
- *
- * DMA transfers are limited to the lower 16MB of _physical_ memory.  
- * Note that addresses loaded into registers must be _physical_ addresses,
- * not logical addresses (which may differ if paging is active).
- *
- *  Address mapping for channels 0-3:
- *
- *   A23 ... A16 A15 ... A8  A7 ... A0    (Physical addresses)
- *    |  ...  |   |  ... |   |  ... |
- *    |  ...  |   |  ... |   |  ... |
- *    |  ...  |   |  ... |   |  ... |
- *   P7  ...  P0  A7 ... A0  A7 ... A0   
- * |    Page    | Addr MSB | Addr LSB |   (DMA registers)
- *
- *  Address mapping for channels 5-7:
- *
- *   A23 ... A17 A16 A15 ... A9 A8 A7 ... A1 A0    (Physical addresses)
- *    |  ...  |   \   \   ... \  \  \  ... \  \
- *    |  ...  |    \   \   ... \  \  \  ... \  (not used)
- *    |  ...  |     \   \   ... \  \  \  ... \
- *   P7  ...  P1 (0) A7 A6  ... A0 A7 A6 ... A0   
- * |      Page      |  Addr MSB   |  Addr LSB  |   (DMA registers)
- *
- * Again, channels 5-7 transfer _physical_ words (16 bits), so addresses
- * and counts _must_ be word-aligned (the lowest address bit is _ignored_ at
- * the hardware level, so odd-byte transfers aren't possible).
- *
- * Transfer count (_not # bytes_) is limited to 64K, represented as actual
- * count - 1 : 64K => 0xFFFF, 1 => 0x0000.  Thus, count is always 1 or more,
- * and up to 128K bytes may be transferred on channels 5-7 in one operation. 
- *
- */
-
-#define MAX_DMA_CHANNELS	8
-
-/* The maximum address that we can perform a DMA transfer to on this platform */
-#define MAX_DMA_ADDRESS      (PAGE_OFFSET+0x10000000)
-
-/* 8237 DMA controllers */
-#define IO_DMA1_BASE	0x00	/* 8 bit slave DMA, channels 0..3 */
-#define IO_DMA2_BASE	0xC0	/* 16 bit master DMA, ch 4(=slave input)..7 */
-
-/* DMA controller registers */
-#define DMA1_CMD_REG		0x08	/* command register (w) */
-#define DMA1_STAT_REG		0x08	/* status register (r) */
-#define DMA1_REQ_REG            0x09    /* request register (w) */
-#define DMA1_MASK_REG		0x0A	/* single-channel mask (w) */
-#define DMA1_MODE_REG		0x0B	/* mode register (w) */
-#define DMA1_CLEAR_FF_REG	0x0C	/* clear pointer flip-flop (w) */
-#define DMA1_TEMP_REG           0x0D    /* Temporary Register (r) */
-#define DMA1_RESET_REG		0x0D	/* Master Clear (w) */
-#define DMA1_CLR_MASK_REG       0x0E    /* Clear Mask */
-#define DMA1_MASK_ALL_REG       0x0F    /* all-channels mask (w) */
-
-#define DMA2_CMD_REG		0xD0	/* command register (w) */
-#define DMA2_STAT_REG		0xD0	/* status register (r) */
-#define DMA2_REQ_REG            0xD2    /* request register (w) */
-#define DMA2_MASK_REG		0xD4	/* single-channel mask (w) */
-#define DMA2_MODE_REG		0xD6	/* mode register (w) */
-#define DMA2_CLEAR_FF_REG	0xD8	/* clear pointer flip-flop (w) */
-#define DMA2_TEMP_REG           0xDA    /* Temporary Register (r) */
-#define DMA2_RESET_REG		0xDA	/* Master Clear (w) */
-#define DMA2_CLR_MASK_REG       0xDC    /* Clear Mask */
-#define DMA2_MASK_ALL_REG       0xDE    /* all-channels mask (w) */
-
-#define DMA_ADDR_0              0x00    /* DMA address registers */
-#define DMA_ADDR_1              0x02
-#define DMA_ADDR_2              0x04
-#define DMA_ADDR_3              0x06
-#define DMA_ADDR_4              0xC0
-#define DMA_ADDR_5              0xC4
-#define DMA_ADDR_6              0xC8
-#define DMA_ADDR_7              0xCC
-
-#define DMA_CNT_0               0x01    /* DMA count registers */
-#define DMA_CNT_1               0x03
-#define DMA_CNT_2               0x05
-#define DMA_CNT_3               0x07
-#define DMA_CNT_4               0xC2
-#define DMA_CNT_5               0xC6
-#define DMA_CNT_6               0xCA
-#define DMA_CNT_7               0xCE
-
-#define DMA_PAGE_0              0x87    /* DMA page registers */
-#define DMA_PAGE_1              0x83
-#define DMA_PAGE_2              0x81
-#define DMA_PAGE_3              0x82
-#define DMA_PAGE_5              0x8B
-#define DMA_PAGE_6              0x89
-#define DMA_PAGE_7              0x8A
-
-#define DMA_MODE_READ	0x44	/* I/O to memory, no autoinit, increment, single mode */
-#define DMA_MODE_WRITE	0x48	/* memory to I/O, no autoinit, increment, single mode */
-#define DMA_MODE_CASCADE 0xC0   /* pass thru DREQ->HRQ, DACK<-HLDA only */
-
-#define DMA_AUTOINIT	0x10
-
-
-extern spinlock_t  dma_spin_lock;
-
-static __inline__ unsigned long claim_dma_lock(void)
-{
-	unsigned long flags;
-	spin_lock_irqsave(&dma_spin_lock, flags);
-	return flags;
-}
-
-static __inline__ void release_dma_lock(unsigned long flags)
-{
-	spin_unlock_irqrestore(&dma_spin_lock, flags);
-}
-
-/* enable/disable a specific DMA channel */
-static __inline__ void enable_dma(unsigned int dmanr)
-{
-	if (dmanr<=3)
-		dma_outb(dmanr,  DMA1_MASK_REG);
-	else
-		dma_outb(dmanr & 3,  DMA2_MASK_REG);
-}
-
-static __inline__ void disable_dma(unsigned int dmanr)
-{
-	if (dmanr<=3)
-		dma_outb(dmanr | 4,  DMA1_MASK_REG);
-	else
-		dma_outb((dmanr & 3) | 4,  DMA2_MASK_REG);
-}
-
-/* Clear the 'DMA Pointer Flip Flop'.
- * Write 0 for LSB/MSB, 1 for MSB/LSB access.
- * Use this once to initialize the FF to a known state.
- * After that, keep track of it. :-)
- * --- In order to do that, the DMA routines below should ---
- * --- only be used while holding the DMA lock ! ---
- */
-static __inline__ void clear_dma_ff(unsigned int dmanr)
-{
-	if (dmanr<=3)
-		dma_outb(0,  DMA1_CLEAR_FF_REG);
-	else
-		dma_outb(0,  DMA2_CLEAR_FF_REG);
-}
-
-/* set mode (above) for a specific DMA channel */
-static __inline__ void set_dma_mode(unsigned int dmanr, char mode)
-{
-	if (dmanr<=3)
-		dma_outb(mode | dmanr,  DMA1_MODE_REG);
-	else
-		dma_outb(mode | (dmanr&3),  DMA2_MODE_REG);
-}
-
-/* Set only the page register bits of the transfer address.
- * This is used for successive transfers when we know the contents of
- * the lower 16 bits of the DMA current address register, but a 64k boundary
- * may have been crossed.
- */
-static __inline__ void set_dma_page(unsigned int dmanr, unsigned int pagenr)
-{
-	switch(dmanr) {
-		case 0:
-			dma_outb( pagenr       & 0xff, DMA_PAGE_0);
-			dma_outb((pagenr >> 8) & 0xff, DMA_PAGE_0 + 0x400);
-			break;
-		case 1:
-			dma_outb( pagenr       & 0xff, DMA_PAGE_1);
-			dma_outb((pagenr >> 8) & 0xff, DMA_PAGE_1 + 0x400);
-			break;
-		case 2:
-			dma_outb( pagenr       & 0xff, DMA_PAGE_2);
-			dma_outb((pagenr >> 8) & 0xff, DMA_PAGE_2 + 0x400);
-			break;
-		case 3:
-			dma_outb( pagenr       & 0xff, DMA_PAGE_3);
-			dma_outb((pagenr >> 8) & 0xff, DMA_PAGE_3 + 0x400);
-			break;
-		case 5:
-			dma_outb( pagenr       & 0xfe, DMA_PAGE_5);
-			dma_outb((pagenr >> 8) & 0xff, DMA_PAGE_5 + 0x400);
-			break;
-		case 6:
-			dma_outb( pagenr       & 0xfe, DMA_PAGE_6);
-			dma_outb((pagenr >> 8) & 0xff, DMA_PAGE_6 + 0x400);
-			break;
-		case 7:
-			dma_outb( pagenr       & 0xfe, DMA_PAGE_7);
-			dma_outb((pagenr >> 8) & 0xff, DMA_PAGE_7 + 0x400);
-			break;
-       	}
-}
-
-
-/* Set transfer address & page bits for specific DMA channel.
- * Assumes dma flipflop is clear.
- */
-static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a)
-{
-	set_dma_page(dmanr, a>>16);
-	if (dmanr <= 3)  {
-	    dma_outb( a & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE );
-            dma_outb( (a>>8) & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE );
-	}  else  {
-	    dma_outb( (a>>1) & 0xff, ((dmanr&3)<<2) + IO_DMA2_BASE );
-	    dma_outb( (a>>9) & 0xff, ((dmanr&3)<<2) + IO_DMA2_BASE );
-	}
-}
-
-
-/* Set transfer size (max 64k for DMA1..3, 128k for DMA5..7) for
- * a specific DMA channel.
- * You must ensure the parameters are valid.
- * NOTE: from a manual: "the number of transfers is one more
- * than the initial word count"! This is taken into account.
- * Assumes dma flip-flop is clear.
- * NOTE 2: "count" represents _bytes_ and must be even for channels 5-7.
- */
-static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count)
-{
-        count--;
-	if (dmanr <= 3)  {
-	    dma_outb( count & 0xff, ((dmanr&3)<<1) + 1 + IO_DMA1_BASE );
-	    dma_outb( (count>>8) & 0xff, ((dmanr&3)<<1) + 1 + IO_DMA1_BASE );
-        } else {
-	    dma_outb( (count>>1) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA2_BASE );
-	    dma_outb( (count>>9) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA2_BASE );
-        }
-}
-
-
-/* Get DMA residue count. After a DMA transfer, this
- * should return zero. Reading this while a DMA transfer is
- * still in progress will return unpredictable results.
- * If called before the channel has been used, it may return 1.
- * Otherwise, it returns the number of _bytes_ left to transfer.
- *
- * Assumes DMA flip-flop is clear.
- */
-static __inline__ int get_dma_residue(unsigned int dmanr)
-{
-	unsigned int io_port = (dmanr<=3)? ((dmanr&3)<<1) + 1 + IO_DMA1_BASE
-					 : ((dmanr&3)<<2) + 2 + IO_DMA2_BASE;
-
-	/* using short to get 16-bit wrap around */
-	unsigned short count;
-
-	count = 1 + dma_inb(io_port);
-	count += dma_inb(io_port) << 8;
-	return (dmanr<=3)? count : (count<<1);
-}
-
-
-/* These are in kernel/dma.c: */
-extern int request_dma(unsigned int dmanr, const char * device_id);	/* reserve a DMA channel */
-extern void free_dma(unsigned int dmanr);	/* release it again */
-
-/* From PCI */
-
-#ifdef CONFIG_PCI
-extern int isa_dma_bridge_buggy;
-#else
-#define isa_dma_bridge_buggy 	(0)
-#endif
-
-#endif /* _ASM_MPC1211_DMA_H */
diff --git a/include/asm-sh/mpc1211/io.h b/include/asm-sh/mpc1211/io.h
deleted file mode 100644
index 6298370bec2d..000000000000
--- a/include/asm-sh/mpc1211/io.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * include/asm-sh/mpc1211/io.h
- *
- * Copyright 2001 Saito.K & Jeanne
- *
- * IO functions for an Interface MPC-1211
- */
-
-#ifndef _ASM_SH_IO_MPC1211_H
-#define _ASM_SH_IO_MPC1211_H
-
-#include <linux/time.h>
-
-extern int mpc1211_irq_demux(int irq);
-
-extern void init_mpc1211_IRQ(void);
-extern void heartbeat_mpc1211(void);
-
-extern void mpc1211_rtc_gettimeofday(struct timeval *tv);
-extern int mpc1211_rtc_settimeofday(const struct timeval *tv);
-
-#endif /* _ASM_SH_IO_MPC1211_H */
diff --git a/include/asm-sh/mpc1211/keyboard.h b/include/asm-sh/mpc1211/keyboard.h
deleted file mode 100644
index 9020feee7b4c..000000000000
--- a/include/asm-sh/mpc1211/keyboard.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- *  MPC1211 specific keybord definitions
- *  Taken from the old asm-i386/keybord.h for PC/AT-style definitions
- *  created 3 Nov 1996 by Geert Uytterhoeven.
- */
-
-#ifdef __KERNEL__
-
-#include <linux/kernel.h>
-#include <linux/ioport.h>
-#include <linux/kd.h>
-#include <linux/pm.h>
-#include <asm/io.h>
-
-#define KEYBOARD_IRQ			1
-#define DISABLE_KBD_DURING_INTERRUPTS	0
-
-extern int pckbd_setkeycode(unsigned int scancode, unsigned int keycode);
-extern int pckbd_getkeycode(unsigned int scancode);
-extern int pckbd_translate(unsigned char scancode, unsigned char *keycode,
-			   char raw_mode);
-extern char pckbd_unexpected_up(unsigned char keycode);
-extern void pckbd_leds(unsigned char leds);
-extern void pckbd_init_hw(void);
-extern int pckbd_pm_resume(struct pm_dev *, pm_request_t, void *);
-extern pm_callback pm_kbd_request_override;
-
-#define kbd_setkeycode		pckbd_setkeycode
-#define kbd_getkeycode		pckbd_getkeycode
-#define kbd_translate		pckbd_translate
-#define kbd_unexpected_up	pckbd_unexpected_up
-#define kbd_leds		pckbd_leds
-#define kbd_init_hw		pckbd_init_hw
-
-/* resource allocation */
-#define kbd_request_region()
-#define kbd_request_irq(handler) request_irq(KEYBOARD_IRQ, handler, 0, \
-                                             "keyboard", NULL)
-
-/* How to access the keyboard macros on this platform.  */
-#define kbd_read_input() inb(KBD_DATA_REG)
-#define kbd_read_status() inb(KBD_STATUS_REG)
-#define kbd_write_output(val) outb(val, KBD_DATA_REG)
-#define kbd_write_command(val) outb(val, KBD_CNTL_REG)
-
-/* Some stoneage hardware needs delays after some operations.  */
-#define kbd_pause() do { } while(0)
-
-/*
- * Machine specific bits for the PS/2 driver
- */
-
-#define AUX_IRQ 12
-
-#define aux_request_irq(hand, dev_id)					\
-	request_irq(AUX_IRQ, hand, IRQF_SHARED, "PS2 Mouse", dev_id)
-
-#define aux_free_irq(dev_id) free_irq(AUX_IRQ, dev_id)
-
-#endif /* __KERNEL__ */
diff --git a/include/asm-sh/mpc1211/m1543c.h b/include/asm-sh/mpc1211/m1543c.h
deleted file mode 100644
index c95d13236c3b..000000000000
--- a/include/asm-sh/mpc1211/m1543c.h
+++ /dev/null
@@ -1,200 +0,0 @@
-#ifndef __ASM_SH_M1543C_H
-#define __ASM_SH_M1543C_H
-
-/*
- * linux/include/asm-sh/m1543c.h
- * Copyright (C) 2001  Nobuhiro Sakawa
- * M1543C:PCI-ISA Bus Bridge with Super IO Chip support
- *
- * from
- *
- * linux/include/asm-sh/smc37c93x.h
- *
- * Copyright (C) 2000  Kazumoto Kojima
- *
- * SMSC 37C93x Super IO Chip support
- */
-
-/* Default base I/O address */
-#define FDC_PRIMARY_BASE	0x3f0
-#define IDE1_PRIMARY_BASE	0x1f0
-#define IDE1_SECONDARY_BASE	0x170
-#define PARPORT_PRIMARY_BASE	0x378
-#define COM1_PRIMARY_BASE	0x2f8
-#define COM2_PRIMARY_BASE	0x3f8
-#define COM3_PRIMARY_BASE	0x3e8
-#define RTC_PRIMARY_BASE	0x070
-#define KBC_PRIMARY_BASE	0x060
-#define AUXIO_PRIMARY_BASE	0x000	/* XXX */
-#define I8259_M_CR		0x20
-#define I8259_M_MR		0x21
-#define I8259_S_CR		0xa0
-#define I8259_S_MR		0xa1
-
-/* Logical device number */
-#define LDN_FDC			0
-#define LDN_IDE1		1
-#define LDN_IDE2		2
-#define LDN_PARPORT		3
-#define LDN_COM1		4
-#define LDN_COM2		5
-#define LDN_COM3		11
-#define LDN_RTC			6
-#define LDN_KBC			7
-
-/* Configuration port and key */
-#define CONFIG_PORT		0x3f0
-#define INDEX_PORT		CONFIG_PORT
-#define DATA_PORT		0x3f1
-#define CONFIG_ENTER1		0x51
-#define CONFIG_ENTER2		0x23
-#define CONFIG_EXIT		0xbb
-
-/* Configuration index */
-#define CURRENT_LDN_INDEX	0x07
-#define POWER_CONTROL_INDEX	0x22
-#define ACTIVATE_INDEX		0x30
-#define IO_BASE_HI_INDEX	0x60
-#define IO_BASE_LO_INDEX	0x61
-#define IRQ_SELECT_INDEX	0x70
-#define PS2_IRQ_INDEX		0x72
-#define DMA_SELECT_INDEX	0x74
-
-/* UART stuff. Only for debugging.  */
-/* UART Register */
-
-#define UART_RBR	0x0	/* Receiver Buffer Register (Read Only) */
-#define UART_THR	0x0	/* Transmitter Holding Register (Write Only) */
-#define UART_IER	0x2	/* Interrupt Enable Register */
-#define UART_IIR	0x4	/* Interrupt Ident Register (Read Only) */
-#define UART_FCR	0x4	/* FIFO Control Register (Write Only) */
-#define UART_LCR	0x6	/* Line Control Register */
-#define UART_MCR	0x8	/* MODEM Control Register */
-#define UART_LSR	0xa	/* Line Status Register */
-#define UART_MSR	0xc	/* MODEM Status Register */
-#define UART_SCR	0xe	/* Scratch Register */
-#define UART_DLL	0x0	/* Divisor Latch (LS) */
-#define UART_DLM	0x2	/* Divisor Latch (MS) */
-
-#ifndef __ASSEMBLY__
-typedef struct uart_reg {
-	volatile __u16 rbr;
-	volatile __u16 ier;
-	volatile __u16 iir;
-	volatile __u16 lcr;
-	volatile __u16 mcr;
-	volatile __u16 lsr;
-	volatile __u16 msr;
-	volatile __u16 scr;
-} uart_reg;
-#endif /* ! __ASSEMBLY__ */
-
-/* Alias for Write Only Register */
-
-#define thr	rbr
-#define tcr	iir
-
-/* Alias for Divisor Latch Register */
-
-#define dll	rbr
-#define dlm	ier
-#define fcr	iir
-
-/* Interrupt Enable Register */
-
-#define IER_ERDAI	0x0100	/* Enable Received Data Available Interrupt */
-#define IER_ETHREI	0x0200	/* Enable Transmitter Holding Register Empty Interrupt */
-#define IER_ELSI	0x0400	/* Enable Receiver Line Status Interrupt */
-#define IER_EMSI	0x0800	/* Enable MODEM Status Interrupt */
-
-/* Interrupt Ident Register */
-
-#define IIR_IP		0x0100	/* "0" if Interrupt Pending */
-#define IIR_IIB0	0x0200	/* Interrupt ID Bit 0 */
-#define IIR_IIB1	0x0400	/* Interrupt ID Bit 1 */
-#define IIR_IIB2	0x0800	/* Interrupt ID Bit 2 */
-#define IIR_FIFO	0xc000	/* FIFOs enabled */
-
-/* FIFO Control Register */
-
-#define FCR_FEN		0x0100	/* FIFO enable */
-#define FCR_RFRES	0x0200	/* Receiver FIFO reset */
-#define FCR_TFRES	0x0400	/* Transmitter FIFO reset */
-#define FCR_DMA		0x0800	/* DMA mode select */
-#define FCR_RTL		0x4000	/* Receiver triger (LSB) */
-#define FCR_RTM		0x8000	/* Receiver triger (MSB) */
-
-/* Line Control Register */
-
-#define LCR_WLS0	0x0100	/* Word Length Select Bit 0 */
-#define LCR_WLS1	0x0200	/* Word Length Select Bit 1 */
-#define LCR_STB		0x0400	/* Number of Stop Bits */
-#define LCR_PEN		0x0800	/* Parity Enable */
-#define LCR_EPS		0x1000	/* Even Parity Select */
-#define LCR_SP		0x2000	/* Stick Parity */
-#define LCR_SB		0x4000	/* Set Break */
-#define LCR_DLAB	0x8000	/* Divisor Latch Access Bit */
-
-/* MODEM Control Register */
-
-#define MCR_DTR		0x0100	/* Data Terminal Ready */
-#define MCR_RTS		0x0200	/* Request to Send */
-#define MCR_OUT1	0x0400	/* Out 1 */
-#define MCR_IRQEN	0x0800	/* IRQ Enable */
-#define MCR_LOOP	0x1000	/* Loop */
-
-/* Line Status Register */
-
-#define LSR_DR		0x0100	/* Data Ready */
-#define LSR_OE		0x0200	/* Overrun Error */
-#define LSR_PE		0x0400	/* Parity Error */
-#define LSR_FE		0x0800	/* Framing Error */
-#define LSR_BI		0x1000	/* Break Interrupt */
-#define LSR_THRE	0x2000	/* Transmitter Holding Register Empty */
-#define LSR_TEMT	0x4000	/* Transmitter Empty */
-#define LSR_FIFOE	0x8000	/* Receiver FIFO error */
-
-/* MODEM Status Register */
-
-#define MSR_DCTS	0x0100	/* Delta Clear to Send */
-#define MSR_DDSR	0x0200	/* Delta Data Set Ready */
-#define MSR_TERI	0x0400	/* Trailing Edge Ring Indicator */
-#define MSR_DDCD	0x0800	/* Delta Data Carrier Detect */
-#define MSR_CTS		0x1000	/* Clear to Send */
-#define MSR_DSR		0x2000	/* Data Set Ready */
-#define MSR_RI		0x4000	/* Ring Indicator */
-#define MSR_DCD		0x8000	/* Data Carrier Detect */
-
-/* Baud Rate Divisor */
-
-#define UART_CLK	(1843200)	/* 1.8432 MHz */
-#define UART_BAUD(x)	(UART_CLK / (16 * (x)))
-
-/* RTC register definition */
-#define RTC_SECONDS             0
-#define RTC_SECONDS_ALARM       1
-#define RTC_MINUTES             2
-#define RTC_MINUTES_ALARM       3
-#define RTC_HOURS               4
-#define RTC_HOURS_ALARM         5
-#define RTC_DAY_OF_WEEK         6
-#define RTC_DAY_OF_MONTH        7
-#define RTC_MONTH               8
-#define RTC_YEAR                9
-#define RTC_FREQ_SELECT		10
-# define RTC_UIP 0x80
-# define RTC_DIV_CTL 0x70
-/* This RTC can work under 32.768KHz clock only.  */
-# define RTC_OSC_ENABLE 0x20
-# define RTC_OSC_DISABLE 0x00
-#define RTC_CONTROL     	11
-# define RTC_SET 0x80
-# define RTC_PIE 0x40
-# define RTC_AIE 0x20
-# define RTC_UIE 0x10
-# define RTC_SQWE 0x08
-# define RTC_DM_BINARY 0x04
-# define RTC_24H 0x02
-# define RTC_DST_EN 0x01
-
-#endif  /* __ASM_SH_M1543C_H */
diff --git a/include/asm-sh/mpc1211/mc146818rtc.h b/include/asm-sh/mpc1211/mc146818rtc.h
deleted file mode 100644
index e245f2a3cd78..000000000000
--- a/include/asm-sh/mpc1211/mc146818rtc.h
+++ /dev/null
@@ -1,6 +0,0 @@
-/*
- * MPC1211 uses PC/AT style RTC definitions.
- */
-#include <asm-x86/mc146818rtc_32.h>
-
-
diff --git a/include/asm-sh/mpc1211/mpc1211.h b/include/asm-sh/mpc1211/mpc1211.h
deleted file mode 100644
index fa456c3e4e01..000000000000
--- a/include/asm-sh/mpc1211/mpc1211.h
+++ /dev/null
@@ -1,18 +0,0 @@
-#ifndef __ASM_SH_MPC1211_H
-#define __ASM_SH_MPC1211_H
-
-/*
- * linux/include/asm-sh/mpc1211.h
- *
- * Copyright (C) 2001  Saito.K & Jeanne
- *
- * Interface MPC-1211 support
- */
-
-#define PA_PCI_IO       (0xa4000000)    /* PCI I/O space */
-#define PA_PCI_MEM      (0xb0000000)    /* PCI MEM space */
-
-#define PCIPAR          (0xa4000cf8)    /* PCI Config address */
-#define PCIPDR          (0xa4000cfc)    /* PCI Config data    */
-
-#endif  /* __ASM_SH_MPC1211_H */
diff --git a/include/asm-sh/mpc1211/pci.h b/include/asm-sh/mpc1211/pci.h
deleted file mode 100644
index d9162c5ed76a..000000000000
--- a/include/asm-sh/mpc1211/pci.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- *	Low-Level PCI Support for MPC-1211
- *
- *      (c) 2002 Saito.K & Jeanne
- *
- */
-
-#ifndef _PCI_MPC1211_H_
-#define _PCI_MPC1211_H_
-
-#include <linux/pci.h>
-
-/* set debug level 4=verbose...1=terse */
-//#define DEBUG_PCI 3
-#undef DEBUG_PCI
-
-#ifdef DEBUG_PCI
-#define PCIDBG(n, x...) { if(DEBUG_PCI>=n) printk(x); }
-#else
-#define PCIDBG(n, x...)
-#endif
-
-/* startup values */
-#define PCI_PROBE_BIOS    1
-#define PCI_PROBE_CONF1   2
-#define PCI_PROBE_CONF2   4
-#define PCI_NO_CHECKS     0x400
-#define PCI_ASSIGN_ROMS   0x1000
-#define PCI_BIOS_IRQ_SCAN 0x2000
-
-/* MPC-1211 Specific Values */
-#define PCIPAR            (0xa4000cf8)    /* PCI Config address */
-#define PCIPDR            (0xa4000cfc)    /* PCI Config data    */
-
-#define PA_PCI_IO         (0xa4000000)    /* PCI I/O space */
-#define PA_PCI_MEM        (0xb0000000)    /* PCI MEM space */
-
-#endif /* _PCI_MPC1211_H_ */
diff --git a/include/asm-sh/r7780rp.h b/include/asm-sh/r7780rp.h
index a33838f23a6d..306f7359f7d4 100644
--- a/include/asm-sh/r7780rp.h
+++ b/include/asm-sh/r7780rp.h
@@ -193,8 +193,6 @@
 #define IRQ_SCIF0		(HL_FPGA_IRQ_BASE + 15)
 #define IRQ_SCIF1		(HL_FPGA_IRQ_BASE + 16)
 
-unsigned char *highlander_init_irq_r7780mp(void);
-unsigned char *highlander_init_irq_r7780rp(void);
-unsigned char *highlander_init_irq_r7785rp(void);
+unsigned char *highlander_plat_irq_setup(void);
 
 #endif  /* __ASM_SH_RENESAS_R7780RP */
diff --git a/include/asm-sh/tlb_64.h b/include/asm-sh/tlb_64.h
index 0308e05fc57b..0a96f3af69e3 100644
--- a/include/asm-sh/tlb_64.h
+++ b/include/asm-sh/tlb_64.h
@@ -56,6 +56,7 @@ static inline void __flush_tlb_slot(unsigned long long slot)
 	__asm__ __volatile__ ("putcfg %0, 0, r63\n" : : "r" (slot));
 }
 
+#ifdef CONFIG_MMU
 /* arch/sh64/mm/tlb.c */
 int sh64_tlb_init(void);
 unsigned long long sh64_next_free_dtlb_entry(void);
@@ -64,6 +65,13 @@ int sh64_put_wired_dtlb_entry(unsigned long long entry);
 void sh64_setup_tlb_slot(unsigned long long config_addr, unsigned long eaddr,
 			 unsigned long asid, unsigned long paddr);
 void sh64_teardown_tlb_slot(unsigned long long config_addr);
-
+#else
+#define sh64_tlb_init()					do { } while (0)
+#define sh64_next_free_dtlb_entry()			(0)
+#define sh64_get_wired_dtlb_entry()			(0)
+#define sh64_put_wired_dtlb_entry(entry)		do { } while (0)
+#define sh64_setup_tlb_slot(conf, virt, asid, phys)	do { } while (0)
+#define sh64_teardown_tlb_slot(addr)			do { } while (0)
+#endif /* CONFIG_MMU */
 #endif /* __ASSEMBLY__ */
 #endif /* __ASM_SH_TLB_64_H */
diff --git a/include/asm-sh/topology.h b/include/asm-sh/topology.h
index 34cdb28e8f44..95f0085e098a 100644
--- a/include/asm-sh/topology.h
+++ b/include/asm-sh/topology.h
@@ -29,6 +29,17 @@
 	.nr_balance_failed	= 0,			\
 }
 
+#define cpu_to_node(cpu)	((void)(cpu),0)
+#define parent_node(node)	((void)(node),0)
+
+#define node_to_cpumask(node)	((void)node, cpu_online_map)
+#define node_to_first_cpu(node)	((void)(node),0)
+
+#define pcibus_to_node(bus)	((void)(bus), -1)
+#define pcibus_to_cpumask(bus)	(pcibus_to_node(bus) == -1 ? \
+					CPU_MASK_ALL : \
+					node_to_cpumask(pcibus_to_node(bus)) \
+				)
 #endif
 
 #include <asm-generic/topology.h>
diff --git a/include/asm-sh/uaccess_64.h b/include/asm-sh/uaccess_64.h
index f956b7b316c7..a9b68d094844 100644
--- a/include/asm-sh/uaccess_64.h
+++ b/include/asm-sh/uaccess_64.h
@@ -274,7 +274,9 @@ struct exception_table_entry
 	unsigned long insn, fixup;
 };
 
+#ifdef CONFIG_MMU
 #define ARCH_HAS_SEARCH_EXTABLE
+#endif
 
 /* Returns 0 if exception not found and fixup.unit otherwise.  */
 extern unsigned long search_exception_table(unsigned long addr);