Merge tag 'mfd-for-linus-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
 "Changes to existing drivers:
  - DT clean-ups in da9055-core, max14577, rn5t618, arizona, hi6421, stmpe, twl4030
  - Export symbols for use in modules in max14577
  - Plenty of static code analysis/Coccinelle fixes throughout the SS
  - Regmap clean-ups in arizona, wm5102, wm5110, da9052, tps65217, rk808
  - Remove unused/duplicate code in da9052, 88pm860x, ti_ssp, lpc_sch, arizona
  - Bug fixes in ti_am335x_tscadc, da9052, ti_am335x_tscadc, rtsx_pcr
  - IRQ fixups in arizona, stmpe, max14577
  - Regulator related changes in axp20x
  - Pass DMA coherency information from parent => child in MFD core
  - Rename DT document files for consistency
  - Add ACPI support to the MFD core
  - Add Andreas Werner to MAINTAINERS for MEN F21BMC

 New drivers/supported devices:
  - New driver for MEN 14F021P00 Board Management Controller
  - New driver for Ricoh RN5T618 PMIC
  - New driver for Rockchip RK808
  - New driver for HiSilicon Hi6421 PMIC
  - New driver for Qualcomm SPMI PMICs
  - Add support for Intel Braswell in lpc_ich
  - Add support for Intel 9 Series PCH in lpc_ich
  - Add support for Intel Quark ILB in lpc_sch"

[ Delayed to after the poweer/reset pull due to Kconfig problems with
  recursive Kconfig select/depends-on chains.   - Linus ]

* tag 'mfd-for-linus-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (79 commits)
  mfd: cros_ec: wait for completion of commands that return IN_PROGRESS
  i2c: i2c-cros-ec-tunnel: Set retries to 3
  mfd: cros_ec: move locking into cros_ec_cmd_xfer
  mfd: cros_ec: stop calling ->cmd_xfer() directly
  mfd: cros_ec: Delay for 50ms when we see EC_CMD_REBOOT_EC
  MAINTAINERS: Adds Andreas Werner to maintainers list for MEN F21BMC
  mfd: arizona: Correct mask to allow setting micbias external cap
  mfd: Add ACPI support
  Revert "mfd: wm5102: Manually apply register patch"
  mfd: ti_am335x_tscadc: Update logic in CTRL register for 5-wire TS
  mfd: dt-bindings: atmel-gpbr: Rename doc file to conform to naming convention
  mfd: dt-bindings: qcom-pm8xxx: Rename doc file to conform to naming convention
  mfd: Inherit coherent_dma_mask from parent device
  mfd: Document DT bindings for Qualcomm SPMI PMICs
  mfd: Add support for Qualcomm SPMI PMICs
  mfd: dt-bindings: pm8xxx: Add new compatible string
  mfd: axp209x: Drop the parent supplies field
  mfd: twl4030-power: Use 'ti,system-power-controller' as alternative way to support system power off
  mfd: dt-bindings: twl4030-power: Use the standard property to mark power control
  mfd: syscon: Add Atmel GPBR DT bindings documention
  ...

13 files changed, 614 insertions, 108 deletions

diff --git a/include/linux/mfd/arizona/registers.h b/include/linux/mfd/arizona/registers.h
index dbd23c36de21..c0b075f6bc35 100644
--- a/include/linux/mfd/arizona/registers.h
+++ b/include/linux/mfd/arizona/registers.h
@@ -27,6 +27,7 @@
 #define ARIZONA_WRITE_SEQUENCER_CTRL_0           0x16
 #define ARIZONA_WRITE_SEQUENCER_CTRL_1           0x17
 #define ARIZONA_WRITE_SEQUENCER_CTRL_2           0x18
+#define ARIZONA_WRITE_SEQUENCER_CTRL_3           0x19
 #define ARIZONA_WRITE_SEQUENCER_PROM             0x1A
 #define ARIZONA_TONE_GENERATOR_1                 0x20
 #define ARIZONA_TONE_GENERATOR_2                 0x21
@@ -70,7 +71,9 @@
 #define ARIZONA_SAMPLE_RATE_3_STATUS             0x10C
 #define ARIZONA_ASYNC_CLOCK_1                    0x112
 #define ARIZONA_ASYNC_SAMPLE_RATE_1              0x113
+#define ARIZONA_ASYNC_SAMPLE_RATE_2              0x114
 #define ARIZONA_ASYNC_SAMPLE_RATE_1_STATUS       0x11B
+#define ARIZONA_ASYNC_SAMPLE_RATE_2_STATUS       0x11C
 #define ARIZONA_OUTPUT_SYSTEM_CLOCK              0x149
 #define ARIZONA_OUTPUT_ASYNC_CLOCK               0x14A
 #define ARIZONA_RATE_ESTIMATOR_1                 0x152
@@ -1664,16 +1667,30 @@
 /*
  * R275 (0x113) - Async sample rate 1
  */
-#define ARIZONA_ASYNC_SAMPLE_RATE_MASK           0x001F  /* ASYNC_SAMPLE_RATE - [4:0] */
-#define ARIZONA_ASYNC_SAMPLE_RATE_SHIFT               0  /* ASYNC_SAMPLE_RATE - [4:0] */
-#define ARIZONA_ASYNC_SAMPLE_RATE_WIDTH               5  /* ASYNC_SAMPLE_RATE - [4:0] */
+#define ARIZONA_ASYNC_SAMPLE_RATE_1_MASK         0x001F  /* ASYNC_SAMPLE_RATE_1 - [4:0] */
+#define ARIZONA_ASYNC_SAMPLE_RATE_1_SHIFT             0  /* ASYNC_SAMPLE_RATE_1 - [4:0] */
+#define ARIZONA_ASYNC_SAMPLE_RATE_1_WIDTH             5  /* ASYNC_SAMPLE_RATE_1 - [4:0] */
+
+/*
+ * R276 (0x114) - Async sample rate 2
+ */
+#define ARIZONA_ASYNC_SAMPLE_RATE_2_MASK         0x001F  /* ASYNC_SAMPLE_RATE_2 - [4:0] */
+#define ARIZONA_ASYNC_SAMPLE_RATE_2_SHIFT             0  /* ASYNC_SAMPLE_RATE_2 - [4:0] */
+#define ARIZONA_ASYNC_SAMPLE_RATE_2_WIDTH             5  /* ASYNC_SAMPLE_RATE_2 - [4:0] */
 
 /*
  * R283 (0x11B) - Async sample rate 1 status
  */
-#define ARIZONA_ASYNC_SAMPLE_RATE_STS_MASK       0x001F  /* ASYNC_SAMPLE_RATE_STS - [4:0] */
-#define ARIZONA_ASYNC_SAMPLE_RATE_STS_SHIFT           0  /* ASYNC_SAMPLE_RATE_STS - [4:0] */
-#define ARIZONA_ASYNC_SAMPLE_RATE_STS_WIDTH           5  /* ASYNC_SAMPLE_RATE_STS - [4:0] */
+#define ARIZONA_ASYNC_SAMPLE_RATE_1_STS_MASK     0x001F  /* ASYNC_SAMPLE_RATE_1_STS - [4:0] */
+#define ARIZONA_ASYNC_SAMPLE_RATE_1_STS_SHIFT         0  /* ASYNC_SAMPLE_RATE_1_STS - [4:0] */
+#define ARIZONA_ASYNC_SAMPLE_RATE_1_STS_WIDTH         5  /* ASYNC_SAMPLE_RATE_1_STS - [4:0] */
+
+/*
+ * R284 (0x11C) - Async sample rate 2 status
+ */
+#define ARIZONA_ASYNC_SAMPLE_RATE_2_STS_MASK     0x001F  /* ASYNC_SAMPLE_RATE_2_STS - [4:0] */
+#define ARIZONA_ASYNC_SAMPLE_RATE_2_STS_SHIFT         0  /* ASYNC_SAMPLE_RATE_2_STS - [4:0] */
+#define ARIZONA_ASYNC_SAMPLE_RATE_2_STS_WIDTH         5  /* ASYNC_SAMPLE_RATE_2_STS - [4:0] */
 
 /*
  * R329 (0x149) - Output system clock
diff --git a/include/linux/mfd/core.h b/include/linux/mfd/core.h
index f543de91ce19..73e1709d4c09 100644
--- a/include/linux/mfd/core.h
+++ b/include/linux/mfd/core.h
@@ -44,6 +44,9 @@ struct mfd_cell {
 	 */
 	const char		*of_compatible;
 
+	/* Matches ACPI PNP id, either _HID or _CID */
+	const char		*acpi_pnpid;
+
 	/*
 	 * These resources can be specified relative to the parent device.
 	 * For accessing hardware you should use resources from the platform dev
diff --git a/include/linux/mfd/cros_ec.h b/include/linux/mfd/cros_ec.h
index fcbe9d129a9d..0e166b92f5b4 100644
--- a/include/linux/mfd/cros_ec.h
+++ b/include/linux/mfd/cros_ec.h
@@ -62,10 +62,6 @@ struct cros_ec_command {
  * @dev: Device pointer
  * @was_wake_device: true if this device was set to wake the system from
  * sleep at the last suspend
- * @cmd_xfer: send command to EC and get response
- *     Returns the number of bytes received if the communication succeeded, but
- *     that doesn't mean the EC was happy with the command. The caller
- *     should check msg.result for the EC's result code.
  *
  * @priv: Private data
  * @irq: Interrupt to use
@@ -82,6 +78,10 @@ struct cros_ec_command {
  * @dout_size: size of dout buffer to allocate (zero to use static dout)
  * @parent: pointer to parent device (e.g. i2c or spi device)
  * @wake_enabled: true if this device can wake the system from sleep
+ * @cmd_xfer: send command to EC and get response
+ *     Returns the number of bytes received if the communication succeeded, but
+ *     that doesn't mean the EC was happy with the command. The caller
+ *     should check msg.result for the EC's result code.
  * @lock: one transaction at a time
  */
 struct cros_ec_device {
@@ -92,8 +92,6 @@ struct cros_ec_device {
 	struct device *dev;
 	bool was_wake_device;
 	struct class *cros_class;
-	int (*cmd_xfer)(struct cros_ec_device *ec,
-			struct cros_ec_command *msg);
 
 	/* These are used to implement the platform-specific interface */
 	void *priv;
@@ -104,6 +102,8 @@ struct cros_ec_device {
 	int dout_size;
 	struct device *parent;
 	bool wake_enabled;
+	int (*cmd_xfer)(struct cros_ec_device *ec,
+			struct cros_ec_command *msg);
 	struct mutex lock;
 };
 
@@ -153,6 +153,18 @@ int cros_ec_check_result(struct cros_ec_device *ec_dev,
 			 struct cros_ec_command *msg);
 
 /**
+ * cros_ec_cmd_xfer - Send a command to the ChromeOS EC
+ *
+ * Call this to send a command to the ChromeOS EC.  This should be used
+ * instead of calling the EC's cmd_xfer() callback directly.
+ *
+ * @ec_dev: EC device
+ * @msg: Message to write
+ */
+int cros_ec_cmd_xfer(struct cros_ec_device *ec_dev,
+		     struct cros_ec_command *msg);
+
+/**
  * cros_ec_remove - Remove a ChromeOS EC
  *
  * Call this to deregister a ChromeOS EC, then clean up any private data.
diff --git a/include/linux/mfd/da9052/da9052.h b/include/linux/mfd/da9052/da9052.h
index bba65f51a0b5..c18a4c19d6fc 100644
--- a/include/linux/mfd/da9052/da9052.h
+++ b/include/linux/mfd/da9052/da9052.h
@@ -211,7 +211,7 @@ static inline int da9052_reg_update(struct da9052 *da9052, unsigned char reg,
 int da9052_device_init(struct da9052 *da9052, u8 chip_id);
 void da9052_device_exit(struct da9052 *da9052);
 
-extern struct regmap_config da9052_regmap_config;
+extern const struct regmap_config da9052_regmap_config;
 
 int da9052_irq_init(struct da9052 *da9052);
 int da9052_irq_exit(struct da9052 *da9052);
diff --git a/include/linux/mfd/davinci_voicecodec.h b/include/linux/mfd/davinci_voicecodec.h
index 5166935ce66d..cb01496bfa49 100644
--- a/include/linux/mfd/davinci_voicecodec.h
+++ b/include/linux/mfd/davinci_voicecodec.h
@@ -21,7 +21,7 @@
  */
 
 #ifndef __LINUX_MFD_DAVINCI_VOICECODEC_H_
-#define __LINUX_MFD_DAVINIC_VOICECODEC_H_
+#define __LINUX_MFD_DAVINCI_VOICECODEC_H_
 
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
diff --git a/include/linux/mfd/hi6421-pmic.h b/include/linux/mfd/hi6421-pmic.h
new file mode 100644
index 000000000000..587273e35acf
--- /dev/null
+++ b/include/linux/mfd/hi6421-pmic.h
@@ -0,0 +1,41 @@
+/*
+ * Header file for device driver Hi6421 PMIC
+ *
+ * Copyright (c) <2011-2014> HiSilicon Technologies Co., Ltd.
+ *              http://www.hisilicon.com
+ * Copyright (c) <2013-2014> Linaro Ltd.
+ *              http://www.linaro.org
+ *
+ * Author: Guodong Xu <guodong.xu@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef	__HI6421_PMIC_H
+#define	__HI6421_PMIC_H
+
+/* Hi6421 registers are mapped to memory bus in 4 bytes stride */
+#define HI6421_REG_TO_BUS_ADDR(x)	(x << 2)
+
+/* Hi6421 maximum register number */
+#define HI6421_REG_MAX			0xFF
+
+/* Hi6421 OCP (over current protection) and DEB (debounce) control register */
+#define	HI6421_OCP_DEB_CTRL_REG		HI6421_REG_TO_BUS_ADDR(0x51)
+#define	HI6421_OCP_DEB_SEL_MASK		0x0C
+#define HI6421_OCP_DEB_SEL_8MS		0x00
+#define HI6421_OCP_DEB_SEL_16MS		0x04
+#define HI6421_OCP_DEB_SEL_32MS		0x08
+#define HI6421_OCP_DEB_SEL_64MS		0x0C
+#define HI6421_OCP_EN_DEBOUNCE_MASK	0x02
+#define HI6421_OCP_EN_DEBOUNCE_ENABLE	0x02
+#define HI6421_OCP_AUTO_STOP_MASK	0x01
+#define HI6421_OCP_AUTO_STOP_ENABLE	0x01
+
+struct hi6421_pmic {
+	struct regmap		*regmap;
+};
+
+#endif		/* __HI6421_PMIC_H */
diff --git a/include/linux/mfd/max77693-private.h b/include/linux/mfd/max77693-private.h
index d0e578fd7053..fc17d56581b2 100644
--- a/include/linux/mfd/max77693-private.h
+++ b/include/linux/mfd/max77693-private.h
@@ -46,7 +46,7 @@ enum max77693_pmic_reg {
 	MAX77693_LED_REG_VOUT_FLASH2			= 0x0C,
 	MAX77693_LED_REG_FLASH_INT			= 0x0E,
 	MAX77693_LED_REG_FLASH_INT_MASK			= 0x0F,
-	MAX77693_LED_REG_FLASH_INT_STATUS		= 0x10,
+	MAX77693_LED_REG_FLASH_STATUS			= 0x10,
 
 	MAX77693_PMIC_REG_PMIC_ID1			= 0x20,
 	MAX77693_PMIC_REG_PMIC_ID2			= 0x21,
@@ -85,6 +85,65 @@ enum max77693_pmic_reg {
 	MAX77693_PMIC_REG_END,
 };
 
+/* MAX77693 ITORCH register */
+#define TORCH_IOUT1_SHIFT	0
+#define TORCH_IOUT2_SHIFT	4
+#define TORCH_IOUT_MIN		15625
+#define TORCH_IOUT_MAX		250000
+#define TORCH_IOUT_STEP		15625
+
+/* MAX77693 IFLASH1 and IFLASH2 registers */
+#define FLASH_IOUT_MIN		15625
+#define FLASH_IOUT_MAX_1LED	1000000
+#define FLASH_IOUT_MAX_2LEDS	625000
+#define FLASH_IOUT_STEP		15625
+
+/* MAX77693 TORCH_TIMER register */
+#define TORCH_TMR_NO_TIMER	0x40
+#define TORCH_TIMEOUT_MIN	262000
+#define TORCH_TIMEOUT_MAX	15728000
+
+/* MAX77693 FLASH_TIMER register */
+#define FLASH_TMR_LEVEL		0x80
+#define FLASH_TIMEOUT_MIN	62500
+#define FLASH_TIMEOUT_MAX	1000000
+#define FLASH_TIMEOUT_STEP	62500
+
+/* MAX77693 FLASH_EN register */
+#define FLASH_EN_OFF		0x0
+#define FLASH_EN_FLASH		0x1
+#define FLASH_EN_TORCH		0x2
+#define FLASH_EN_ON		0x3
+#define FLASH_EN_SHIFT(x)	(6 - ((x) - 1) * 2)
+#define TORCH_EN_SHIFT(x)	(2 - ((x) - 1) * 2)
+
+/* MAX77693 MAX_FLASH1 register */
+#define MAX_FLASH1_MAX_FL_EN	0x80
+#define MAX_FLASH1_VSYS_MIN	2400
+#define MAX_FLASH1_VSYS_MAX	3400
+#define MAX_FLASH1_VSYS_STEP	33
+
+/* MAX77693 VOUT_CNTL register */
+#define FLASH_BOOST_FIXED	0x04
+#define FLASH_BOOST_LEDNUM_2	0x80
+
+/* MAX77693 VOUT_FLASH1 register */
+#define FLASH_VOUT_MIN		3300
+#define FLASH_VOUT_MAX		5500
+#define FLASH_VOUT_STEP		25
+#define FLASH_VOUT_RMIN		0x0c
+
+/* MAX77693 FLASH_STATUS register */
+#define FLASH_STATUS_FLASH_ON	BIT(3)
+#define FLASH_STATUS_TORCH_ON	BIT(2)
+
+/* MAX77693 FLASH_INT register */
+#define FLASH_INT_FLED2_OPEN	BIT(0)
+#define FLASH_INT_FLED2_SHORT	BIT(1)
+#define FLASH_INT_FLED1_OPEN	BIT(2)
+#define FLASH_INT_FLED1_SHORT	BIT(3)
+#define FLASH_INT_OVER_CURRENT	BIT(4)
+
 /* MAX77693 CHG_CNFG_00 register */
 #define CHG_CNFG_00_CHG_MASK		0x1
 #define CHG_CNFG_00_BUCK_MASK		0x4
diff --git a/include/linux/mfd/max77693.h b/include/linux/mfd/max77693.h
index 3f3dc45f93ee..f0b6585cd874 100644
--- a/include/linux/mfd/max77693.h
+++ b/include/linux/mfd/max77693.h
@@ -63,6 +63,45 @@ struct max77693_muic_platform_data {
 	int path_uart;
 };
 
+/* MAX77693 led flash */
+
+/* triggers */
+enum max77693_led_trigger {
+	MAX77693_LED_TRIG_OFF,
+	MAX77693_LED_TRIG_FLASH,
+	MAX77693_LED_TRIG_TORCH,
+	MAX77693_LED_TRIG_EXT,
+	MAX77693_LED_TRIG_SOFT,
+};
+
+/* trigger types */
+enum max77693_led_trigger_type {
+	MAX77693_LED_TRIG_TYPE_EDGE,
+	MAX77693_LED_TRIG_TYPE_LEVEL,
+};
+
+/* boost modes */
+enum max77693_led_boost_mode {
+	MAX77693_LED_BOOST_NONE,
+	MAX77693_LED_BOOST_ADAPTIVE,
+	MAX77693_LED_BOOST_FIXED,
+};
+
+struct max77693_led_platform_data {
+	u32 fleds[2];
+	u32 iout_torch[2];
+	u32 iout_flash[2];
+	u32 trigger[2];
+	u32 trigger_type[2];
+	u32 num_leds;
+	u32 boost_mode;
+	u32 flash_timeout;
+	u32 boost_vout;
+	u32 low_vsys;
+};
+
+/* MAX77693 */
+
 struct max77693_platform_data {
 	/* regulator data */
 	struct max77693_regulator_data *regulators;
@@ -70,5 +109,6 @@ struct max77693_platform_data {
 
 	/* muic data */
 	struct max77693_muic_platform_data *muic_data;
+	struct max77693_led_platform_data *led_data;
 };
 #endif	/* __LINUX_MFD_MAX77693_H */
diff --git a/include/linux/mfd/rk808.h b/include/linux/mfd/rk808.h
new file mode 100644
index 000000000000..fb09312d854b
--- /dev/null
+++ b/include/linux/mfd/rk808.h
@@ -0,0 +1,196 @@
+/*
+ * rk808.h for Rockchip RK808
+ *
+ * Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd
+ *
+ * Author: Chris Zhong <zyw@rock-chips.com>
+ * Author: Zhang Qing <zhangqing@rock-chips.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef __LINUX_REGULATOR_rk808_H
+#define __LINUX_REGULATOR_rk808_H
+
+#include <linux/regulator/machine.h>
+#include <linux/regmap.h>
+
+/*
+ * rk808 Global Register Map.
+ */
+
+#define RK808_DCDC1	0 /* (0+RK808_START) */
+#define RK808_LDO1	4 /* (4+RK808_START) */
+#define RK808_NUM_REGULATORS   14
+
+enum rk808_reg {
+	RK808_ID_DCDC1,
+	RK808_ID_DCDC2,
+	RK808_ID_DCDC3,
+	RK808_ID_DCDC4,
+	RK808_ID_LDO1,
+	RK808_ID_LDO2,
+	RK808_ID_LDO3,
+	RK808_ID_LDO4,
+	RK808_ID_LDO5,
+	RK808_ID_LDO6,
+	RK808_ID_LDO7,
+	RK808_ID_LDO8,
+	RK808_ID_SWITCH1,
+	RK808_ID_SWITCH2,
+};
+
+#define RK808_SECONDS_REG	0x00
+#define RK808_MINUTES_REG	0x01
+#define RK808_HOURS_REG		0x02
+#define RK808_DAYS_REG		0x03
+#define RK808_MONTHS_REG	0x04
+#define RK808_YEARS_REG		0x05
+#define RK808_WEEKS_REG		0x06
+#define RK808_ALARM_SECONDS_REG	0x08
+#define RK808_ALARM_MINUTES_REG	0x09
+#define RK808_ALARM_HOURS_REG	0x0a
+#define RK808_ALARM_DAYS_REG	0x0b
+#define RK808_ALARM_MONTHS_REG	0x0c
+#define RK808_ALARM_YEARS_REG	0x0d
+#define RK808_RTC_CTRL_REG	0x10
+#define RK808_RTC_STATUS_REG	0x11
+#define RK808_RTC_INT_REG	0x12
+#define RK808_RTC_COMP_LSB_REG	0x13
+#define RK808_RTC_COMP_MSB_REG	0x14
+#define RK808_CLK32OUT_REG	0x20
+#define RK808_VB_MON_REG	0x21
+#define RK808_THERMAL_REG	0x22
+#define RK808_DCDC_EN_REG	0x23
+#define RK808_LDO_EN_REG	0x24
+#define RK808_SLEEP_SET_OFF_REG1	0x25
+#define RK808_SLEEP_SET_OFF_REG2	0x26
+#define RK808_DCDC_UV_STS_REG	0x27
+#define RK808_DCDC_UV_ACT_REG	0x28
+#define RK808_LDO_UV_STS_REG	0x29
+#define RK808_LDO_UV_ACT_REG	0x2a
+#define RK808_DCDC_PG_REG	0x2b
+#define RK808_LDO_PG_REG	0x2c
+#define RK808_VOUT_MON_TDB_REG	0x2d
+#define RK808_BUCK1_CONFIG_REG		0x2e
+#define RK808_BUCK1_ON_VSEL_REG		0x2f
+#define RK808_BUCK1_SLP_VSEL_REG	0x30
+#define RK808_BUCK1_DVS_VSEL_REG	0x31
+#define RK808_BUCK2_CONFIG_REG		0x32
+#define RK808_BUCK2_ON_VSEL_REG		0x33
+#define RK808_BUCK2_SLP_VSEL_REG	0x34
+#define RK808_BUCK2_DVS_VSEL_REG	0x35
+#define RK808_BUCK3_CONFIG_REG		0x36
+#define RK808_BUCK4_CONFIG_REG		0x37
+#define RK808_BUCK4_ON_VSEL_REG		0x38
+#define RK808_BUCK4_SLP_VSEL_REG	0x39
+#define RK808_BOOST_CONFIG_REG		0x3a
+#define RK808_LDO1_ON_VSEL_REG		0x3b
+#define RK808_LDO1_SLP_VSEL_REG		0x3c
+#define RK808_LDO2_ON_VSEL_REG		0x3d
+#define RK808_LDO2_SLP_VSEL_REG		0x3e
+#define RK808_LDO3_ON_VSEL_REG		0x3f
+#define RK808_LDO3_SLP_VSEL_REG		0x40
+#define RK808_LDO4_ON_VSEL_REG		0x41
+#define RK808_LDO4_SLP_VSEL_REG		0x42
+#define RK808_LDO5_ON_VSEL_REG		0x43
+#define RK808_LDO5_SLP_VSEL_REG		0x44
+#define RK808_LDO6_ON_VSEL_REG		0x45
+#define RK808_LDO6_SLP_VSEL_REG		0x46
+#define RK808_LDO7_ON_VSEL_REG		0x47
+#define RK808_LDO7_SLP_VSEL_REG		0x48
+#define RK808_LDO8_ON_VSEL_REG		0x49
+#define RK808_LDO8_SLP_VSEL_REG		0x4a
+#define RK808_DEVCTRL_REG	0x4b
+#define RK808_INT_STS_REG1	0x4c
+#define RK808_INT_STS_MSK_REG1	0x4d
+#define RK808_INT_STS_REG2	0x4e
+#define RK808_INT_STS_MSK_REG2	0x4f
+#define RK808_IO_POL_REG	0x50
+
+/* IRQ Definitions */
+#define RK808_IRQ_VOUT_LO	0
+#define RK808_IRQ_VB_LO		1
+#define RK808_IRQ_PWRON		2
+#define RK808_IRQ_PWRON_LP	3
+#define RK808_IRQ_HOTDIE	4
+#define RK808_IRQ_RTC_ALARM	5
+#define RK808_IRQ_RTC_PERIOD	6
+#define RK808_IRQ_PLUG_IN_INT	7
+#define RK808_IRQ_PLUG_OUT_INT	8
+#define RK808_NUM_IRQ		9
+
+#define RK808_IRQ_VOUT_LO_MSK		BIT(0)
+#define RK808_IRQ_VB_LO_MSK		BIT(1)
+#define RK808_IRQ_PWRON_MSK		BIT(2)
+#define RK808_IRQ_PWRON_LP_MSK		BIT(3)
+#define RK808_IRQ_HOTDIE_MSK		BIT(4)
+#define RK808_IRQ_RTC_ALARM_MSK		BIT(5)
+#define RK808_IRQ_RTC_PERIOD_MSK	BIT(6)
+#define RK808_IRQ_PLUG_IN_INT_MSK	BIT(0)
+#define RK808_IRQ_PLUG_OUT_INT_MSK	BIT(1)
+
+#define RK808_VBAT_LOW_2V8	0x00
+#define RK808_VBAT_LOW_2V9	0x01
+#define RK808_VBAT_LOW_3V0	0x02
+#define RK808_VBAT_LOW_3V1	0x03
+#define RK808_VBAT_LOW_3V2	0x04
+#define RK808_VBAT_LOW_3V3	0x05
+#define RK808_VBAT_LOW_3V4	0x06
+#define RK808_VBAT_LOW_3V5	0x07
+#define VBAT_LOW_VOL_MASK	(0x07 << 0)
+#define EN_VABT_LOW_SHUT_DOWN	(0x00 << 4)
+#define EN_VBAT_LOW_IRQ		(0x1 << 4)
+#define VBAT_LOW_ACT_MASK	(0x1 << 4)
+
+#define BUCK_ILMIN_MASK		(7 << 0)
+#define BOOST_ILMIN_MASK	(7 << 0)
+#define BUCK1_RATE_MASK		(3 << 3)
+#define BUCK2_RATE_MASK		(3 << 3)
+#define MASK_ALL	0xff
+
+#define SWITCH2_EN	BIT(6)
+#define SWITCH1_EN	BIT(5)
+#define DEV_OFF_RST	BIT(3)
+
+#define VB_LO_ACT		BIT(4)
+#define VB_LO_SEL_3500MV	(7 << 0)
+
+#define VOUT_LO_INT	BIT(0)
+#define CLK32KOUT2_EN	BIT(0)
+
+enum {
+	BUCK_ILMIN_50MA,
+	BUCK_ILMIN_100MA,
+	BUCK_ILMIN_150MA,
+	BUCK_ILMIN_200MA,
+	BUCK_ILMIN_250MA,
+	BUCK_ILMIN_300MA,
+	BUCK_ILMIN_350MA,
+	BUCK_ILMIN_400MA,
+};
+
+enum {
+	BOOST_ILMIN_75MA,
+	BOOST_ILMIN_100MA,
+	BOOST_ILMIN_125MA,
+	BOOST_ILMIN_150MA,
+	BOOST_ILMIN_175MA,
+	BOOST_ILMIN_200MA,
+	BOOST_ILMIN_225MA,
+	BOOST_ILMIN_250MA,
+};
+
+struct rk808 {
+	struct i2c_client *i2c;
+	struct regmap_irq_chip_data *irq_data;
+	struct regmap *regmap;
+};
+#endif /* __LINUX_REGULATOR_rk808_H */
diff --git a/include/linux/mfd/rn5t618.h b/include/linux/mfd/rn5t618.h
new file mode 100644
index 000000000000..c72d5344f3b3
--- /dev/null
+++ b/include/linux/mfd/rn5t618.h
@@ -0,0 +1,228 @@
+/*
+ * MFD core driver for Ricoh RN5T618 PMIC
+ *
+ * Copyright (C) 2014 Beniamino Galvani <b.galvani@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __LINUX_MFD_RN5T618_H
+#define __LINUX_MFD_RN5T618_H
+
+#include <linux/regmap.h>
+
+#define RN5T618_LSIVER			0x00
+#define RN5T618_OTPVER			0x01
+#define RN5T618_IODAC			0x02
+#define RN5T618_VINDAC			0x03
+#define RN5T618_CPUCNT			0x06
+#define RN5T618_PSWR			0x07
+#define RN5T618_PONHIS			0x09
+#define RN5T618_POFFHIS			0x0a
+#define RN5T618_WATCHDOG		0x0b
+#define RN5T618_WATCHDOGCNT		0x0c
+#define RN5T618_PWRFUNC			0x0d
+#define RN5T618_SLPCNT			0x0e
+#define RN5T618_REPCNT			0x0f
+#define RN5T618_PWRONTIMSET		0x10
+#define RN5T618_NOETIMSETCNT		0x11
+#define RN5T618_PWRIREN			0x12
+#define RN5T618_PWRIRQ			0x13
+#define RN5T618_PWRMON			0x14
+#define RN5T618_PWRIRSEL		0x15
+#define RN5T618_DC1_SLOT		0x16
+#define RN5T618_DC2_SLOT		0x17
+#define RN5T618_DC3_SLOT		0x18
+#define RN5T618_LDO1_SLOT		0x1b
+#define RN5T618_LDO2_SLOT		0x1c
+#define RN5T618_LDO3_SLOT		0x1d
+#define RN5T618_LDO4_SLOT		0x1e
+#define RN5T618_LDO5_SLOT		0x1f
+#define RN5T618_PSO0_SLOT		0x25
+#define RN5T618_PSO1_SLOT		0x26
+#define RN5T618_PSO2_SLOT		0x27
+#define RN5T618_PSO3_SLOT		0x28
+#define RN5T618_LDORTC1_SLOT		0x2a
+#define RN5T618_DC1CTL			0x2c
+#define RN5T618_DC1CTL2			0x2d
+#define RN5T618_DC2CTL			0x2e
+#define RN5T618_DC2CTL2			0x2f
+#define RN5T618_DC3CTL			0x30
+#define RN5T618_DC3CTL2			0x31
+#define RN5T618_DC1DAC			0x36
+#define RN5T618_DC2DAC			0x37
+#define RN5T618_DC3DAC			0x38
+#define RN5T618_DC1DAC_SLP		0x3b
+#define RN5T618_DC2DAC_SLP		0x3c
+#define RN5T618_DC3DAC_SLP		0x3d
+#define RN5T618_DCIREN			0x40
+#define RN5T618_DCIRQ			0x41
+#define RN5T618_DCIRMON			0x42
+#define RN5T618_LDOEN1			0x44
+#define RN5T618_LDOEN2			0x45
+#define RN5T618_LDODIS			0x46
+#define RN5T618_LDO1DAC			0x4c
+#define RN5T618_LDO2DAC			0x4d
+#define RN5T618_LDO3DAC			0x4e
+#define RN5T618_LDO4DAC			0x4f
+#define RN5T618_LDO5DAC			0x50
+#define RN5T618_LDORTCDAC		0x56
+#define RN5T618_LDORTC2DAC		0x57
+#define RN5T618_LDO1DAC_SLP		0x58
+#define RN5T618_LDO2DAC_SLP		0x59
+#define RN5T618_LDO3DAC_SLP		0x5a
+#define RN5T618_LDO4DAC_SLP		0x5b
+#define RN5T618_LDO5DAC_SLP		0x5c
+#define RN5T618_ADCCNT1			0x64
+#define RN5T618_ADCCNT2			0x65
+#define RN5T618_ADCCNT3			0x66
+#define RN5T618_ILIMDATAH		0x68
+#define RN5T618_ILIMDATAL		0x69
+#define RN5T618_VBATDATAH		0x6a
+#define RN5T618_VBATDATAL		0x6b
+#define RN5T618_VADPDATAH		0x6c
+#define RN5T618_VADPDATAL		0x6d
+#define RN5T618_VUSBDATAH		0x6e
+#define RN5T618_VUSBDATAL		0x6f
+#define RN5T618_VSYSDATAH		0x70
+#define RN5T618_VSYSDATAL		0x71
+#define RN5T618_VTHMDATAH		0x72
+#define RN5T618_VTHMDATAL		0x73
+#define RN5T618_AIN1DATAH		0x74
+#define RN5T618_AIN1DATAL		0x75
+#define RN5T618_AIN0DATAH		0x76
+#define RN5T618_AIN0DATAL		0x77
+#define RN5T618_ILIMTHL			0x78
+#define RN5T618_ILIMTHH			0x79
+#define RN5T618_VBATTHL			0x7a
+#define RN5T618_VBATTHH			0x7b
+#define RN5T618_VADPTHL			0x7c
+#define RN5T618_VADPTHH			0x7d
+#define RN5T618_VUSBTHL			0x7e
+#define RN5T618_VUSBTHH			0x7f
+#define RN5T618_VSYSTHL			0x80
+#define RN5T618_VSYSTHH			0x81
+#define RN5T618_VTHMTHL			0x82
+#define RN5T618_VTHMTHH			0x83
+#define RN5T618_AIN1THL			0x84
+#define RN5T618_AIN1THH			0x85
+#define RN5T618_AIN0THL			0x86
+#define RN5T618_AIN0THH			0x87
+#define RN5T618_EN_ADCIR1		0x88
+#define RN5T618_EN_ADCIR2		0x89
+#define RN5T618_EN_ADCIR3		0x8a
+#define RN5T618_IR_ADC1			0x8c
+#define RN5T618_IR_ADC2			0x8d
+#define RN5T618_IR_ADC3			0x8e
+#define RN5T618_IOSEL			0x90
+#define RN5T618_IOOUT			0x91
+#define RN5T618_GPEDGE1			0x92
+#define RN5T618_GPEDGE2			0x93
+#define RN5T618_EN_GPIR			0x94
+#define RN5T618_IR_GPR			0x95
+#define RN5T618_IR_GPF			0x96
+#define RN5T618_MON_IOIN		0x97
+#define RN5T618_GPLED_FUNC		0x98
+#define RN5T618_INTPOL			0x9c
+#define RN5T618_INTEN			0x9d
+#define RN5T618_INTMON			0x9e
+#define RN5T618_PREVINDAC		0xb0
+#define RN5T618_BATDAC			0xb1
+#define RN5T618_CHGCTL1			0xb3
+#define RN5T618_CHGCTL2			0xb4
+#define RN5T618_VSYSSET			0xb5
+#define RN5T618_REGISET1		0xb6
+#define RN5T618_REGISET2		0xb7
+#define RN5T618_CHGISET			0xb8
+#define RN5T618_TIMSET			0xb9
+#define RN5T618_BATSET1			0xba
+#define RN5T618_BATSET2			0xbb
+#define RN5T618_DIESET			0xbc
+#define RN5T618_CHGSTATE		0xbd
+#define RN5T618_CHGCTRL_IRFMASK		0xbe
+#define RN5T618_CHGSTAT_IRFMASK1	0xbf
+#define RN5T618_CHGSTAT_IRFMASK2	0xc0
+#define RN5T618_CHGERR_IRFMASK		0xc1
+#define RN5T618_CHGCTRL_IRR		0xc2
+#define RN5T618_CHGSTAT_IRR1		0xc3
+#define RN5T618_CHGSTAT_IRR2		0xc4
+#define RN5T618_CHGERR_IRR		0xc5
+#define RN5T618_CHGCTRL_MONI		0xc6
+#define RN5T618_CHGSTAT_MONI1		0xc7
+#define RN5T618_CHGSTAT_MONI2		0xc8
+#define RN5T618_CHGERR_MONI		0xc9
+#define RN5T618_CHGCTRL_DETMOD1		0xca
+#define RN5T618_CHGCTRL_DETMOD2		0xcb
+#define RN5T618_CHGSTAT_DETMOD1		0xcc
+#define RN5T618_CHGSTAT_DETMOD2		0xcd
+#define RN5T618_CHGSTAT_DETMOD3		0xce
+#define RN5T618_CHGERR_DETMOD1		0xcf
+#define RN5T618_CHGERR_DETMOD2		0xd0
+#define RN5T618_CHGOSCCTL		0xd4
+#define RN5T618_CHGOSCSCORESET1		0xd5
+#define RN5T618_CHGOSCSCORESET2		0xd6
+#define RN5T618_CHGOSCSCORESET3		0xd7
+#define RN5T618_CHGOSCFREQSET1		0xd8
+#define RN5T618_CHGOSCFREQSET2		0xd9
+#define RN5T618_CONTROL			0xe0
+#define RN5T618_SOC			0xe1
+#define RN5T618_RE_CAP_H		0xe2
+#define RN5T618_RE_CAP_L		0xe3
+#define RN5T618_FA_CAP_H		0xe4
+#define RN5T618_FA_CAP_L		0xe5
+#define RN5T618_AGE			0xe6
+#define RN5T618_TT_EMPTY_H		0xe7
+#define RN5T618_TT_EMPTY_L		0xe8
+#define RN5T618_TT_FULL_H		0xe9
+#define RN5T618_TT_FULL_L		0xea
+#define RN5T618_VOLTAGE_1		0xeb
+#define RN5T618_VOLTAGE_0		0xec
+#define RN5T618_TEMP_1			0xed
+#define RN5T618_TEMP_0			0xee
+#define RN5T618_CC_CTRL			0xef
+#define RN5T618_CC_COUNT2		0xf0
+#define RN5T618_CC_COUNT1		0xf1
+#define RN5T618_CC_COUNT0		0xf2
+#define RN5T618_CC_SUMREG3		0xf3
+#define RN5T618_CC_SUMREG2		0xf4
+#define RN5T618_CC_SUMREG1		0xf5
+#define RN5T618_CC_SUMREG0		0xf6
+#define RN5T618_CC_OFFREG1		0xf7
+#define RN5T618_CC_OFFREG0		0xf8
+#define RN5T618_CC_GAINREG1		0xf9
+#define RN5T618_CC_GAINREG0		0xfa
+#define RN5T618_CC_AVEREG1		0xfb
+#define RN5T618_CC_AVEREG0		0xfc
+#define RN5T618_MAX_REG			0xfc
+
+#define RN5T618_REPCNT_REPWRON		BIT(0)
+#define RN5T618_SLPCNT_SWPWROFF		BIT(0)
+#define RN5T618_WATCHDOG_WDOGEN		BIT(2)
+#define RN5T618_WATCHDOG_WDOGTIM_M	(BIT(0) | BIT(1))
+#define RN5T618_WATCHDOG_WDOGTIM_S	0
+#define RN5T618_PWRIRQ_IR_WDOG		BIT(6)
+
+enum {
+	RN5T618_DCDC1,
+	RN5T618_DCDC2,
+	RN5T618_DCDC3,
+	RN5T618_LDO1,
+	RN5T618_LDO2,
+	RN5T618_LDO3,
+	RN5T618_LDO4,
+	RN5T618_LDO5,
+	RN5T618_LDORTC1,
+	RN5T618_LDORTC2,
+	RN5T618_REG_NUM,
+};
+
+struct rn5t618 {
+	struct regmap *regmap;
+};
+
+#endif /* __LINUX_MFD_RN5T618_H */
diff --git a/include/linux/mfd/ti_am335x_tscadc.h b/include/linux/mfd/ti_am335x_tscadc.h
index fb96c84dada5..e2e70053470e 100644
--- a/include/linux/mfd/ti_am335x_tscadc.h
+++ b/include/linux/mfd/ti_am335x_tscadc.h
@@ -155,6 +155,7 @@ struct ti_tscadc_dev {
 	void __iomem *tscadc_base;
 	int irq;
 	int used_cells;	/* 1-2 */
+	int tsc_wires;
 	int tsc_cell;	/* -1 if not used */
 	int adc_cell;	/* -1 if not used */
 	struct mfd_cell cells[TSCADC_CELLS];
diff --git a/include/linux/mfd/ti_ssp.h b/include/linux/mfd/ti_ssp.h
deleted file mode 100644
index dbb4b43bd20e..000000000000
--- a/include/linux/mfd/ti_ssp.h
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
- * Sequencer Serial Port (SSP) driver for Texas Instruments' SoCs
- *
- * Copyright (C) 2010 Texas Instruments Inc
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __TI_SSP_H__
-#define __TI_SSP_H__
-
-struct ti_ssp_dev_data {
-	const char	*dev_name;
-	void		*pdata;
-	size_t		pdata_size;
-};
-
-struct ti_ssp_data {
-	unsigned long		out_clock;
-	struct ti_ssp_dev_data	dev_data[2];
-};
-
-struct ti_ssp_spi_data {
-	unsigned long	iosel;
-	int		num_cs;
-	void		(*select)(int cs);
-};
-
-/*
- * Sequencer port IO pin configuration bits.  These do not correlate 1-1 with
- * the hardware.  The iosel field in the port data combines iosel1 and iosel2,
- * and is therefore not a direct map to register space.  It is best to use the
- * macros below to construct iosel values.
- *
- * least significant 16 bits --> iosel1
- * most significant 16 bits  --> iosel2
- */
-
-#define SSP_IN			0x0000
-#define SSP_DATA		0x0001
-#define SSP_CLOCK		0x0002
-#define SSP_CHIPSEL		0x0003
-#define SSP_OUT			0x0004
-#define SSP_PIN_SEL(pin, v)	((v) << ((pin) * 3))
-#define SSP_PIN_MASK(pin)	SSP_PIN_SEL(pin, 0x7)
-#define SSP_INPUT_SEL(pin)	((pin) << 16)
-
-/* Sequencer port config bits */
-#define SSP_EARLY_DIN		BIT(8)
-#define SSP_DELAY_DOUT		BIT(9)
-
-/* Sequence map definitions */
-#define SSP_CLK_HIGH		BIT(0)
-#define SSP_CLK_LOW		0
-#define SSP_DATA_HIGH		BIT(1)
-#define SSP_DATA_LOW		0
-#define SSP_CS_HIGH		BIT(2)
-#define SSP_CS_LOW		0
-#define SSP_OUT_MODE		BIT(3)
-#define SSP_IN_MODE		0
-#define SSP_DATA_REG		BIT(4)
-#define SSP_ADDR_REG		0
-
-#define SSP_OPCODE_DIRECT	((0x0) << 5)
-#define SSP_OPCODE_TOGGLE	((0x1) << 5)
-#define SSP_OPCODE_SHIFT	((0x2) << 5)
-#define SSP_OPCODE_BRANCH0	((0x4) << 5)
-#define SSP_OPCODE_BRANCH1	((0x5) << 5)
-#define SSP_OPCODE_BRANCH	((0x6) << 5)
-#define SSP_OPCODE_STOP		((0x7) << 5)
-#define SSP_BRANCH(addr)	((addr) << 8)
-#define SSP_COUNT(cycles)	((cycles) << 8)
-
-int ti_ssp_raw_read(struct device *dev);
-int ti_ssp_raw_write(struct device *dev, u32 val);
-int ti_ssp_load(struct device *dev, int offs, u32* prog, int len);
-int ti_ssp_run(struct device *dev, u32 pc, u32 input, u32 *output);
-int ti_ssp_set_mode(struct device *dev, int mode);
-int ti_ssp_set_iosel(struct device *dev, u32 iosel);
-
-#endif /* __TI_SSP_H__ */
diff --git a/include/linux/mfd/tps65217.h b/include/linux/mfd/tps65217.h
index 95d6938737fd..ac7fba44d7e4 100644
--- a/include/linux/mfd/tps65217.h
+++ b/include/linux/mfd/tps65217.h
@@ -60,6 +60,8 @@
 #define TPS65217_REG_SEQ5		0X1D
 #define TPS65217_REG_SEQ6		0X1E
 
+#define TPS65217_REG_MAX		TPS65217_REG_SEQ6
+
 /* Register field definitions */
 #define TPS65217_CHIPID_CHIP_MASK	0xF0
 #define TPS65217_CHIPID_REV_MASK	0x0F