[PATCH] swsusp: switch pm_message_t to struct

This adds type-checking to pm_message_t, so that people can't confuse it
with int or u32.  It also allows us to fix "disk yoyo" during suspend (disk
spinning down/up/down).

[We've tried that before; since that cpufreq problems were fixed and I've
tried make allyes config and fixed resulting damage.]

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Alexander Nyberg <alexn@telia.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

3 files changed, 17 insertions, 20 deletions

diff --git a/drivers/video/aty/aty128fb.c b/drivers/video/aty/aty128fb.c
index 7bc1d44d8814..b0eba3ac6420 100644
--- a/drivers/video/aty/aty128fb.c
+++ b/drivers/video/aty/aty128fb.c
@@ -2323,17 +2323,16 @@ static int aty128_pci_suspend(struct pci_dev *pdev, pm_message_t state)
 	 * can properly take care of D3 ? Also, with swsusp, we
 	 * know we'll be rebooted, ...
 	 */
-#ifdef CONFIG_PPC_PMAC
+#ifndef CONFIG_PPC_PMAC
 	/* HACK ALERT ! Once I find a proper way to say to each driver
 	 * individually what will happen with it's PCI slot, I'll change
 	 * that. On laptops, the AGP slot is just unclocked, so D2 is
 	 * expected, while on desktops, the card is powered off
 	 */
-	if (state >= 3)
-		state = 2;
+	return 0;
 #endif /* CONFIG_PPC_PMAC */
 	 
-	if (state != 2 || state == pdev->dev.power.power_state)
+	if (state.event == pdev->dev.power.power_state.event)
 		return 0;
 
 	printk(KERN_DEBUG "aty128fb: suspending...\n");
@@ -2367,7 +2366,7 @@ static int aty128_pci_suspend(struct pci_dev *pdev, pm_message_t state)
 	 * used dummy fb ops, 2.5 need proper support for this at the
 	 * fbdev level
 	 */
-	if (state == 2)
+	if (state.event != PM_EVENT_ON)
 		aty128_set_suspend(par, 1);
 
 	release_console_sem();
@@ -2382,12 +2381,11 @@ static int aty128_do_resume(struct pci_dev *pdev)
 	struct fb_info *info = pci_get_drvdata(pdev);
 	struct aty128fb_par *par = info->par;
 
-	if (pdev->dev.power.power_state == 0)
+	if (pdev->dev.power.power_state.event == PM_EVENT_ON)
 		return 0;
 
 	/* Wakeup chip */
-	if (pdev->dev.power.power_state == 2)
-		aty128_set_suspend(par, 0);
+	aty128_set_suspend(par, 0);
 	par->asleep = 0;
 
 	/* Restore display & engine */
diff --git a/drivers/video/aty/atyfb_base.c b/drivers/video/aty/atyfb_base.c
index 8c42538dc8c1..3e10bd837d9e 100644
--- a/drivers/video/aty/atyfb_base.c
+++ b/drivers/video/aty/atyfb_base.c
@@ -2022,17 +2022,16 @@ static int atyfb_pci_suspend(struct pci_dev *pdev, pm_message_t state)
 	struct fb_info *info = pci_get_drvdata(pdev);
 	struct atyfb_par *par = (struct atyfb_par *) info->par;
 
-#ifdef CONFIG_PPC_PMAC
+#ifndef CONFIG_PPC_PMAC
 	/* HACK ALERT ! Once I find a proper way to say to each driver
 	 * individually what will happen with it's PCI slot, I'll change
 	 * that. On laptops, the AGP slot is just unclocked, so D2 is
 	 * expected, while on desktops, the card is powered off
 	 */
-	if (state >= 3)
-		state = 2;
+	return 0;
 #endif /* CONFIG_PPC_PMAC */
 
-	if (state != 2 || state == pdev->dev.power.power_state)
+	if (state.event == pdev->dev.power.power_state.event)
 		return 0;
 
 	acquire_console_sem();
@@ -2071,12 +2070,12 @@ static int atyfb_pci_resume(struct pci_dev *pdev)
 	struct fb_info *info = pci_get_drvdata(pdev);
 	struct atyfb_par *par = (struct atyfb_par *) info->par;
 
-	if (pdev->dev.power.power_state == 0)
+	if (pdev->dev.power.power_state.event == PM_EVENT_ON)
 		return 0;
 
 	acquire_console_sem();
 
-	if (pdev->dev.power.power_state == 2)
+	if (pdev->dev.power.power_state.event == 2)
 		aty_power_mgmt(0, par);
 	par->asleep = 0;
 
diff --git a/drivers/video/aty/radeon_pm.c b/drivers/video/aty/radeon_pm.c
index 98352af39325..59a1b6f85067 100644
--- a/drivers/video/aty/radeon_pm.c
+++ b/drivers/video/aty/radeon_pm.c
@@ -2526,18 +2526,18 @@ int radeonfb_pci_suspend(struct pci_dev *pdev, pm_message_t state)
         struct radeonfb_info *rinfo = info->par;
 	int i;
 
-	if (state == pdev->dev.power.power_state)
+	if (state.event == pdev->dev.power.power_state.event)
 		return 0;
 
 	printk(KERN_DEBUG "radeonfb (%s): suspending to state: %d...\n",
-	       pci_name(pdev), state);
+	       pci_name(pdev), state.event);
 
 	/* For suspend-to-disk, we cheat here. We don't suspend anything and
 	 * let fbcon continue drawing until we are all set. That shouldn't
 	 * really cause any problem at this point, provided that the wakeup
 	 * code knows that any state in memory may not match the HW
 	 */
-	if (state != PM_SUSPEND_MEM)
+	if (state.event == PM_EVENT_FREEZE)
 		goto done;
 
 	acquire_console_sem();
@@ -2616,7 +2616,7 @@ int radeonfb_pci_resume(struct pci_dev *pdev)
         struct radeonfb_info *rinfo = info->par;
 	int rc = 0;
 
-	if (pdev->dev.power.power_state == 0)
+	if (pdev->dev.power.power_state.event == PM_EVENT_ON)
 		return 0;
 
 	if (rinfo->no_schedule) {
@@ -2626,7 +2626,7 @@ int radeonfb_pci_resume(struct pci_dev *pdev)
 		acquire_console_sem();
 
 	printk(KERN_DEBUG "radeonfb (%s): resuming from state: %d...\n",
-	       pci_name(pdev), pdev->dev.power.power_state);
+	       pci_name(pdev), pdev->dev.power.power_state.event);
 
 
 	if (pci_enable_device(pdev)) {
@@ -2637,7 +2637,7 @@ int radeonfb_pci_resume(struct pci_dev *pdev)
 	}
 	pci_set_master(pdev);
 
-	if (pdev->dev.power.power_state == PM_SUSPEND_MEM) {
+	if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) {
 		/* Wakeup chip. Check from config space if we were powered off
 		 * (todo: additionally, check CLK_PIN_CNTL too)
 		 */