Add bridged amplifiers to cs42l43

Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>:

In some cs42l43 systems a couple of cs35l56 amplifiers are attached
to the cs42l43's SPI and I2S. On Windows the cs42l43 is controlled
by a SDCA class driver and these two amplifiers are controlled by
firmware running on the cs42l43. However, under Linux the decision
was made to interact with the cs42l43 directly, affording the user
greater control over the audio system. However, this has resulted
in an issue where these two bridged cs35l56 amplifiers are not
populated in ACPI and must be added manually. There is at least an
SDCA extension unit DT entry we can key off.

The process of adding this is handled using a software node, firstly the
ability to add native chip selects to software nodes must be added.
Secondly, an additional flag for naming the SPI devices is added this
allows the machine driver to key to the correct amplifier. Then finally,
the cs42l43 SPI driver adds the two amplifiers directly onto its SPI
bus.

An additional series will follow soon to add the audio machine driver
parts (in the sof-sdw driver), however that is fairly orthogonal to
this part of the process, getting the actual amplifiers registered.

1 files changed, 48 insertions, 24 deletions

diff --git a/drivers/usb/dwc2/core_intr.c b/drivers/usb/dwc2/core_intr.c
index 158ede753854..26d752a4c3ca 100644
--- a/drivers/usb/dwc2/core_intr.c
+++ b/drivers/usb/dwc2/core_intr.c
@@ -297,7 +297,8 @@ static void dwc2_handle_session_req_intr(struct dwc2_hsotg *hsotg)
 
 			/* Exit gadget mode clock gating. */
 			if (hsotg->params.power_down ==
-			    DWC2_POWER_DOWN_PARAM_NONE && hsotg->bus_suspended)
+			    DWC2_POWER_DOWN_PARAM_NONE && hsotg->bus_suspended &&
+			    !hsotg->params.no_clock_gating)
 				dwc2_gadget_exit_clock_gating(hsotg, 0);
 		}
 
@@ -322,10 +323,11 @@ static void dwc2_handle_session_req_intr(struct dwc2_hsotg *hsotg)
  * @hsotg: Programming view of DWC_otg controller
  *
  */
-static void dwc2_wakeup_from_lpm_l1(struct dwc2_hsotg *hsotg)
+void dwc2_wakeup_from_lpm_l1(struct dwc2_hsotg *hsotg, bool remotewakeup)
 {
 	u32 glpmcfg;
-	u32 i = 0;
+	u32 pcgctl;
+	u32 dctl;
 
 	if (hsotg->lx_state != DWC2_L1) {
 		dev_err(hsotg->dev, "Core isn't in DWC2_L1 state\n");
@@ -334,37 +336,57 @@ static void dwc2_wakeup_from_lpm_l1(struct dwc2_hsotg *hsotg)
 
 	glpmcfg = dwc2_readl(hsotg, GLPMCFG);
 	if (dwc2_is_device_mode(hsotg)) {
-		dev_dbg(hsotg->dev, "Exit from L1 state\n");
+		dev_dbg(hsotg->dev, "Exit from L1 state, remotewakeup=%d\n", remotewakeup);
 		glpmcfg &= ~GLPMCFG_ENBLSLPM;
-		glpmcfg &= ~GLPMCFG_HIRD_THRES_EN;
+		glpmcfg &= ~GLPMCFG_HIRD_THRES_MASK;
 		dwc2_writel(hsotg, glpmcfg, GLPMCFG);
 
-		do {
-			glpmcfg = dwc2_readl(hsotg, GLPMCFG);
+		pcgctl = dwc2_readl(hsotg, PCGCTL);
+		pcgctl &= ~PCGCTL_ENBL_SLEEP_GATING;
+		dwc2_writel(hsotg, pcgctl, PCGCTL);
 
-			if (!(glpmcfg & (GLPMCFG_COREL1RES_MASK |
-					 GLPMCFG_L1RESUMEOK | GLPMCFG_SLPSTS)))
-				break;
+		glpmcfg = dwc2_readl(hsotg, GLPMCFG);
+		if (glpmcfg & GLPMCFG_ENBESL) {
+			glpmcfg |= GLPMCFG_RSTRSLPSTS;
+			dwc2_writel(hsotg, glpmcfg, GLPMCFG);
+		}
+
+		if (remotewakeup) {
+			if (dwc2_hsotg_wait_bit_set(hsotg, GLPMCFG, GLPMCFG_L1RESUMEOK, 1000)) {
+				dev_warn(hsotg->dev, "%s: timeout GLPMCFG_L1RESUMEOK\n", __func__);
+				goto fail;
+				return;
+			}
+
+			dctl = dwc2_readl(hsotg, DCTL);
+			dctl |= DCTL_RMTWKUPSIG;
+			dwc2_writel(hsotg, dctl, DCTL);
 
-			udelay(1);
-		} while (++i < 200);
+			if (dwc2_hsotg_wait_bit_set(hsotg, GINTSTS, GINTSTS_WKUPINT, 1000)) {
+				dev_warn(hsotg->dev, "%s: timeout GINTSTS_WKUPINT\n", __func__);
+				goto fail;
+				return;
+			}
+		}
 
-		if (i == 200) {
-			dev_err(hsotg->dev, "Failed to exit L1 sleep state in 200us.\n");
+		glpmcfg = dwc2_readl(hsotg, GLPMCFG);
+		if (glpmcfg & GLPMCFG_COREL1RES_MASK || glpmcfg & GLPMCFG_SLPSTS ||
+		    glpmcfg & GLPMCFG_L1RESUMEOK) {
+			goto fail;
 			return;
 		}
-		dwc2_gadget_init_lpm(hsotg);
+
+		/* Inform gadget to exit from L1 */
+		call_gadget(hsotg, resume);
+		/* Change to L0 state */
+		hsotg->lx_state = DWC2_L0;
+		hsotg->bus_suspended = false;
+fail:		dwc2_gadget_init_lpm(hsotg);
 	} else {
 		/* TODO */
 		dev_err(hsotg->dev, "Host side LPM is not supported.\n");
 		return;
 	}
-
-	/* Change to L0 state */
-	hsotg->lx_state = DWC2_L0;
-
-	/* Inform gadget to exit from L1 */
-	call_gadget(hsotg, resume);
 }
 
 /*
@@ -385,7 +407,7 @@ static void dwc2_handle_wakeup_detected_intr(struct dwc2_hsotg *hsotg)
 	dev_dbg(hsotg->dev, "%s lxstate = %d\n", __func__, hsotg->lx_state);
 
 	if (hsotg->lx_state == DWC2_L1) {
-		dwc2_wakeup_from_lpm_l1(hsotg);
+		dwc2_wakeup_from_lpm_l1(hsotg, false);
 		return;
 	}
 
@@ -408,7 +430,8 @@ static void dwc2_handle_wakeup_detected_intr(struct dwc2_hsotg *hsotg)
 
 			/* Exit gadget mode clock gating. */
 			if (hsotg->params.power_down ==
-			    DWC2_POWER_DOWN_PARAM_NONE && hsotg->bus_suspended)
+			    DWC2_POWER_DOWN_PARAM_NONE && hsotg->bus_suspended &&
+			    !hsotg->params.no_clock_gating)
 				dwc2_gadget_exit_clock_gating(hsotg, 0);
 		} else {
 			/* Change to L0 state */
@@ -425,7 +448,8 @@ static void dwc2_handle_wakeup_detected_intr(struct dwc2_hsotg *hsotg)
 			}
 
 			if (hsotg->params.power_down ==
-			    DWC2_POWER_DOWN_PARAM_NONE && hsotg->bus_suspended)
+			    DWC2_POWER_DOWN_PARAM_NONE && hsotg->bus_suspended &&
+			    !hsotg->params.no_clock_gating)
 				dwc2_host_exit_clock_gating(hsotg, 1);
 
 			/*