Merge series "Compatible string consolidation for NXP DSPI driver" from Vladimir Oltean <olteanv@gmail.com>:

This series makes room in the driver for differentiation between the
controllers which currently operate in TCFQ mode. Most of these are
actually capable of a lot more in terms of throughput. This is in
preparation of a second series which will convert the remaining users of
TCFQ mode altogether to XSPI mode with command cycling.

Vladimir Oltean (6):
  doc: spi-fsl-dspi: Add specific compatibles for all Layerscape SoCs
  spi: spi-fsl-dspi: Use specific compatible strings for all SoC
    instantiations
  spi: spi-fsl-dspi: Parameterize the FIFO size and DMA buffer size
  spi: spi-fsl-dspi: LS2080A and LX2160A support XSPI mode
  spi: spi-fsl-dspi: Support SPI software timestamping in all non-DMA
    modes
  spi: spi-fsl-dspi: Convert the instantiations that support it to DMA

 .../devicetree/bindings/spi/spi-fsl-dspi.txt  |  17 +-
 drivers/spi/spi-fsl-dspi.c                    | 162 +++++++++++++-----
 2 files changed, 128 insertions(+), 51 deletions(-)

--
2.17.1

1 files changed, 15 insertions, 5 deletions

diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 3405b146edc9..1d212f82c69b 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -38,7 +38,9 @@
 #include "otg_whitelist.h"
 
 #define USB_VENDOR_GENESYS_LOGIC		0x05e3
+#define USB_VENDOR_SMSC				0x0424
 #define HUB_QUIRK_CHECK_PORT_AUTOSUSPEND	0x01
+#define HUB_QUIRK_DISABLE_AUTOSUSPEND		0x02
 
 #define USB_TP_TRANSMISSION_DELAY	40	/* ns */
 #define USB_TP_TRANSMISSION_DELAY_MAX	65535	/* ns */
@@ -1217,11 +1219,6 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
 #ifdef CONFIG_PM
 			udev->reset_resume = 1;
 #endif
-			/* Don't set the change_bits when the device
-			 * was powered off.
-			 */
-			if (test_bit(port1, hub->power_bits))
-				set_bit(port1, hub->change_bits);
 
 		} else {
 			/* The power session is gone; tell hub_wq */
@@ -1731,6 +1728,10 @@ static void hub_disconnect(struct usb_interface *intf)
 	kfree(hub->buffer);
 
 	pm_suspend_ignore_children(&intf->dev, false);
+
+	if (hub->quirk_disable_autosuspend)
+		usb_autopm_put_interface(intf);
+
 	kref_put(&hub->kref, hub_release);
 }
 
@@ -1863,6 +1864,11 @@ static int hub_probe(struct usb_interface *intf, const struct usb_device_id *id)
 	if (id->driver_info & HUB_QUIRK_CHECK_PORT_AUTOSUSPEND)
 		hub->quirk_check_port_auto_suspend = 1;
 
+	if (id->driver_info & HUB_QUIRK_DISABLE_AUTOSUSPEND) {
+		hub->quirk_disable_autosuspend = 1;
+		usb_autopm_get_interface(intf);
+	}
+
 	if (hub_configure(hub, &desc->endpoint[0].desc) >= 0)
 		return 0;
 
@@ -5599,6 +5605,10 @@ out_hdev_lock:
 }
 
 static const struct usb_device_id hub_id_table[] = {
+    { .match_flags = USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_INT_CLASS,
+      .idVendor = USB_VENDOR_SMSC,
+      .bInterfaceClass = USB_CLASS_HUB,
+      .driver_info = HUB_QUIRK_DISABLE_AUTOSUSPEND},
     { .match_flags = USB_DEVICE_ID_MATCH_VENDOR
 			| USB_DEVICE_ID_MATCH_INT_CLASS,
       .idVendor = USB_VENDOR_GENESYS_LOGIC,