thunderbolt: Add CL0s support for USB4 routers

In this patch we add enabling of CL0s - a low power state of the link.
Low power states (called collectively CLx) are used to reduce
transmitter and receiver power when a high-speed lane is idle. For now,
we add support only for first low power state: CL0s.  We enable it, if
both sides of the link support it, and only for the first hop router.
(i.e. the first device that connected to the host router). This is
needed for better thermal management.

Signed-off-by: Gil Fine <gil.fine@intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>

1 files changed, 263 insertions, 0 deletions

diff --git a/drivers/thunderbolt/switch.c b/drivers/thunderbolt/switch.c
index 13f9230104d7..8e232ce615e9 100644
--- a/drivers/thunderbolt/switch.c
+++ b/drivers/thunderbolt/switch.c
@@ -3223,3 +3223,266 @@ struct tb_port *tb_switch_find_port(struct tb_switch *sw,
 
 	return NULL;
 }
+
+static int __tb_port_pm_secondary_set(struct tb_port *port, bool secondary)
+{
+	u32 phy;
+	int ret;
+
+	ret = tb_port_read(port, &phy, TB_CFG_PORT,
+			   port->cap_phy + LANE_ADP_CS_1, 1);
+	if (ret)
+		return ret;
+
+	if (secondary)
+		phy |= LANE_ADP_CS_1_PMS;
+	else
+		phy &= ~LANE_ADP_CS_1_PMS;
+
+	return tb_port_write(port, &phy, TB_CFG_PORT,
+			     port->cap_phy + LANE_ADP_CS_1, 1);
+}
+
+static int tb_port_pm_secondary_enable(struct tb_port *port)
+{
+	return __tb_port_pm_secondary_set(port, true);
+}
+
+static int tb_port_pm_secondary_disable(struct tb_port *port)
+{
+	return __tb_port_pm_secondary_set(port, false);
+}
+
+static int tb_switch_pm_secondary_resolve(struct tb_switch *sw)
+{
+	struct tb_switch *parent = tb_switch_parent(sw);
+	struct tb_port *up, *down;
+	int ret;
+
+	if (!tb_route(sw))
+		return 0;
+
+	up = tb_upstream_port(sw);
+	down = tb_port_at(tb_route(sw), parent);
+	ret = tb_port_pm_secondary_enable(up);
+	if (ret)
+		return ret;
+
+	return tb_port_pm_secondary_disable(down);
+}
+
+static bool tb_port_clx_supported(struct tb_port *port, enum tb_clx clx)
+{
+	u32 mask, val;
+	bool ret;
+
+	/* Don't enable CLx in case of two single-lane links */
+	if (!port->bonded && port->dual_link_port)
+		return false;
+
+	/* Don't enable CLx in case of inter-domain link */
+	if (port->xdomain)
+		return false;
+
+	if (!usb4_port_clx_supported(port))
+		return false;
+
+	switch (clx) {
+	case TB_CL0S:
+		/* CL0s support requires also CL1 support */
+		mask = LANE_ADP_CS_0_CL0S_SUPPORT | LANE_ADP_CS_0_CL1_SUPPORT;
+		break;
+
+	/* For now we support only CL0s. Not CL1, CL2 */
+	case TB_CL1:
+	case TB_CL2:
+	default:
+		return false;
+	}
+
+	ret = tb_port_read(port, &val, TB_CFG_PORT,
+			   port->cap_phy + LANE_ADP_CS_0, 1);
+	if (ret)
+		return false;
+
+	return !!(val & mask);
+}
+
+static inline bool tb_port_cl0s_supported(struct tb_port *port)
+{
+	return tb_port_clx_supported(port, TB_CL0S);
+}
+
+static int __tb_port_cl0s_set(struct tb_port *port, bool enable)
+{
+	u32 phy, mask;
+	int ret;
+
+	/* To enable CL0s also required to enable CL1 */
+	mask = LANE_ADP_CS_1_CL0S_ENABLE | LANE_ADP_CS_1_CL1_ENABLE;
+	ret = tb_port_read(port, &phy, TB_CFG_PORT,
+			   port->cap_phy + LANE_ADP_CS_1, 1);
+	if (ret)
+		return ret;
+
+	if (enable)
+		phy |= mask;
+	else
+		phy &= ~mask;
+
+	return tb_port_write(port, &phy, TB_CFG_PORT,
+			     port->cap_phy + LANE_ADP_CS_1, 1);
+}
+
+static int tb_port_cl0s_disable(struct tb_port *port)
+{
+	return __tb_port_cl0s_set(port, false);
+}
+
+static int tb_port_cl0s_enable(struct tb_port *port)
+{
+	return __tb_port_cl0s_set(port, true);
+}
+
+static int tb_switch_enable_cl0s(struct tb_switch *sw)
+{
+	struct tb_switch *parent = tb_switch_parent(sw);
+	bool up_cl0s_support, down_cl0s_support;
+	struct tb_port *up, *down;
+	int ret;
+
+	if (!tb_switch_is_usb4(sw))
+		return 0;
+
+	/*
+	 * Enable CLx for host router's downstream port as part of the
+	 * downstream router enabling procedure.
+	 */
+	if (!tb_route(sw))
+		return 0;
+
+	/* Enable CLx only for first hop router (depth = 1) */
+	if (tb_route(parent))
+		return 0;
+
+	ret = tb_switch_pm_secondary_resolve(sw);
+	if (ret)
+		return ret;
+
+	up = tb_upstream_port(sw);
+	down = tb_port_at(tb_route(sw), parent);
+
+	up_cl0s_support = tb_port_cl0s_supported(up);
+	down_cl0s_support = tb_port_cl0s_supported(down);
+
+	tb_port_dbg(up, "CL0s %ssupported\n",
+		    up_cl0s_support ? "" : "not ");
+	tb_port_dbg(down, "CL0s %ssupported\n",
+		    down_cl0s_support ? "" : "not ");
+
+	if (!up_cl0s_support || !down_cl0s_support)
+		return -EOPNOTSUPP;
+
+	ret = tb_port_cl0s_enable(up);
+	if (ret)
+		return ret;
+
+	ret = tb_port_cl0s_enable(down);
+	if (ret) {
+		tb_port_cl0s_disable(up);
+		return ret;
+	}
+
+	sw->clx = TB_CL0S;
+
+	tb_port_dbg(up, "CL0s enabled\n");
+	return 0;
+}
+
+/**
+ * tb_switch_enable_clx() - Enable CLx on upstream port of specified router
+ * @sw: Router to enable CLx for
+ * @clx: The CLx state to enable
+ *
+ * Enable CLx state only for first hop router. That is the most common
+ * use-case, that is intended for better thermal management, and so helps
+ * to improve performance. CLx is enabled only if both sides of the link
+ * support CLx, and if both sides of the link are not configured as two
+ * single lane links and only if the link is not inter-domain link. The
+ * complete set of conditions is descibed in CM Guide 1.0 section 8.1.
+ *
+ * Return: Returns 0 on success or an error code on failure.
+ */
+int tb_switch_enable_clx(struct tb_switch *sw, enum tb_clx clx)
+{
+	struct tb_switch *root_sw = sw->tb->root_switch;
+
+	/*
+	 * CLx is not enabled and validated on Intel USB4 platforms before
+	 * Alder Lake.
+	 */
+	if (root_sw->generation < 4 || tb_switch_is_tiger_lake(root_sw))
+		return 0;
+
+	switch (clx) {
+	case TB_CL0S:
+		return tb_switch_enable_cl0s(sw);
+
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static int tb_switch_disable_cl0s(struct tb_switch *sw)
+{
+	struct tb_switch *parent = tb_switch_parent(sw);
+	struct tb_port *up, *down;
+	int ret;
+
+	if (!tb_switch_is_usb4(sw))
+		return 0;
+
+	/*
+	 * Disable CLx for host router's downstream port as part of the
+	 * downstream router enabling procedure.
+	 */
+	if (!tb_route(sw))
+		return 0;
+
+	/* Disable CLx only for first hop router (depth = 1) */
+	if (tb_route(parent))
+		return 0;
+
+	up = tb_upstream_port(sw);
+	down = tb_port_at(tb_route(sw), parent);
+	ret = tb_port_cl0s_disable(up);
+	if (ret)
+		return ret;
+
+	ret = tb_port_cl0s_disable(down);
+	if (ret)
+		return ret;
+
+	sw->clx = TB_CLX_DISABLE;
+
+	tb_port_dbg(up, "CL0s disabled\n");
+	return 0;
+}
+
+/**
+ * tb_switch_disable_clx() - Disable CLx on upstream port of specified router
+ * @sw: Router to disable CLx for
+ * @clx: The CLx state to disable
+ *
+ * Return: Returns 0 on success or an error code on failure.
+ */
+int tb_switch_disable_clx(struct tb_switch *sw, enum tb_clx clx)
+{
+	switch (clx) {
+	case TB_CL0S:
+		return tb_switch_disable_cl0s(sw);
+
+	default:
+		return -EOPNOTSUPP;
+	}
+}