sd: Honor block layer integrity handling flags

A set of flags introduced in the block layer enable better control over
how protection information is handled. These flags are useful for both
error injection and data recovery purposes. Checking can be enabled and
disabled for controller and disk, and the guard tag format is now a
per-I/O property.

Update sd_protect_op to communicate the relevant information to the
low-level device driver via a set of flags in scsi_cmnd.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>

1 files changed, 43 insertions, 30 deletions

diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 2c2041ca4b70..9f7099f4b537 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -610,29 +610,44 @@ static void scsi_disk_put(struct scsi_disk *sdkp)
 	mutex_unlock(&sd_ref_mutex);
 }
 
-static void sd_prot_op(struct scsi_cmnd *scmd, unsigned int dif)
-{
-	unsigned int prot_op = SCSI_PROT_NORMAL;
-	unsigned int dix = scsi_prot_sg_count(scmd);
-
-	if (scmd->sc_data_direction == DMA_FROM_DEVICE) {
-		if (dif && dix)
-			prot_op = SCSI_PROT_READ_PASS;
-		else if (dif && !dix)
-			prot_op = SCSI_PROT_READ_STRIP;
-		else if (!dif && dix)
-			prot_op = SCSI_PROT_READ_INSERT;
-	} else {
-		if (dif && dix)
-			prot_op = SCSI_PROT_WRITE_PASS;
-		else if (dif && !dix)
-			prot_op = SCSI_PROT_WRITE_INSERT;
-		else if (!dif && dix)
-			prot_op = SCSI_PROT_WRITE_STRIP;
+
+
+static unsigned char sd_setup_protect_cmnd(struct scsi_cmnd *scmd,
+					   unsigned int dix, unsigned int dif)
+{
+	struct bio *bio = scmd->request->bio;
+	unsigned int prot_op = sd_prot_op(rq_data_dir(scmd->request), dix, dif);
+	unsigned int protect = 0;
+
+	if (dix) {				/* DIX Type 0, 1, 2, 3 */
+		if (bio_integrity_flagged(bio, BIP_IP_CHECKSUM))
+			scmd->prot_flags |= SCSI_PROT_IP_CHECKSUM;
+
+		if (bio_integrity_flagged(bio, BIP_CTRL_NOCHECK) == false)
+			scmd->prot_flags |= SCSI_PROT_GUARD_CHECK;
+	}
+
+	if (dif != SD_DIF_TYPE3_PROTECTION) {	/* DIX/DIF Type 0, 1, 2 */
+		scmd->prot_flags |= SCSI_PROT_REF_INCREMENT;
+
+		if (bio_integrity_flagged(bio, BIP_CTRL_NOCHECK) == false)
+			scmd->prot_flags |= SCSI_PROT_REF_CHECK;
+	}
+
+	if (dif) {				/* DIX/DIF Type 1, 2, 3 */
+		scmd->prot_flags |= SCSI_PROT_TRANSFER_PI;
+
+		if (bio_integrity_flagged(bio, BIP_DISK_NOCHECK))
+			protect = 3 << 5;	/* Disable target PI checking */
+		else
+			protect = 1 << 5;	/* Enable target PI checking */
 	}
 
 	scsi_set_prot_op(scmd, prot_op);
 	scsi_set_prot_type(scmd, dif);
+	scmd->prot_flags &= sd_prot_flag_mask(prot_op);
+
+	return protect;
 }
 
 static void sd_config_discard(struct scsi_disk *sdkp, unsigned int mode)
@@ -893,7 +908,8 @@ static int sd_setup_read_write_cmnd(struct scsi_cmnd *SCpnt)
 	sector_t block = blk_rq_pos(rq);
 	sector_t threshold;
 	unsigned int this_count = blk_rq_sectors(rq);
-	int ret, host_dif;
+	unsigned int dif, dix;
+	int ret;
 	unsigned char protect;
 
 	ret = scsi_init_io(SCpnt, GFP_ATOMIC);
@@ -995,7 +1011,7 @@ static int sd_setup_read_write_cmnd(struct scsi_cmnd *SCpnt)
 		SCpnt->cmnd[0] = WRITE_6;
 
 		if (blk_integrity_rq(rq))
-			sd_dif_prepare(rq, block, sdp->sector_size);
+			sd_dif_prepare(SCpnt);
 
 	} else if (rq_data_dir(rq) == READ) {
 		SCpnt->cmnd[0] = READ_6;
@@ -1010,14 +1026,15 @@ static int sd_setup_read_write_cmnd(struct scsi_cmnd *SCpnt)
 					"writing" : "reading", this_count,
 					blk_rq_sectors(rq)));
 
-	/* Set RDPROTECT/WRPROTECT if disk is formatted with DIF */
-	host_dif = scsi_host_dif_capable(sdp->host, sdkp->protection_type);
-	if (host_dif)
-		protect = 1 << 5;
+	dix = scsi_prot_sg_count(SCpnt);
+	dif = scsi_host_dif_capable(SCpnt->device->host, sdkp->protection_type);
+
+	if (dif || dix)
+		protect = sd_setup_protect_cmnd(SCpnt, dix, dif);
 	else
 		protect = 0;
 
-	if (host_dif == SD_DIF_TYPE2_PROTECTION) {
+	if (protect && sdkp->protection_type == SD_DIF_TYPE2_PROTECTION) {
 		SCpnt->cmnd = mempool_alloc(sd_cdb_pool, GFP_ATOMIC);
 
 		if (unlikely(SCpnt->cmnd == NULL)) {
@@ -1102,10 +1119,6 @@ static int sd_setup_read_write_cmnd(struct scsi_cmnd *SCpnt)
 	}
 	SCpnt->sdb.length = this_count * sdp->sector_size;
 
-	/* If DIF or DIX is enabled, tell HBA how to handle request */
-	if (host_dif || scsi_prot_sg_count(SCpnt))
-		sd_prot_op(SCpnt, host_dif);
-
 	/*
 	 * We shouldn't disconnect in the middle of a sector, so with a dumb
 	 * host adapter, it's safe to assume that we can at least transfer