Add bridged amplifiers to cs42l43

Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>:

In some cs42l43 systems a couple of cs35l56 amplifiers are attached
to the cs42l43's SPI and I2S. On Windows the cs42l43 is controlled
by a SDCA class driver and these two amplifiers are controlled by
firmware running on the cs42l43. However, under Linux the decision
was made to interact with the cs42l43 directly, affording the user
greater control over the audio system. However, this has resulted
in an issue where these two bridged cs35l56 amplifiers are not
populated in ACPI and must be added manually. There is at least an
SDCA extension unit DT entry we can key off.

The process of adding this is handled using a software node, firstly the
ability to add native chip selects to software nodes must be added.
Secondly, an additional flag for naming the SPI devices is added this
allows the machine driver to key to the correct amplifier. Then finally,
the cs42l43 SPI driver adds the two amplifiers directly onto its SPI
bus.

An additional series will follow soon to add the audio machine driver
parts (in the sof-sdw driver), however that is fairly orthogonal to
this part of the process, getting the actual amplifiers registered.

1 files changed, 34 insertions, 0 deletions

diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index 8d06475de17a..ffd7e7e72933 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -1642,6 +1642,40 @@ int scsi_add_device(struct Scsi_Host *host, uint channel,
 }
 EXPORT_SYMBOL(scsi_add_device);
 
+int scsi_resume_device(struct scsi_device *sdev)
+{
+	struct device *dev = &sdev->sdev_gendev;
+	int ret = 0;
+
+	device_lock(dev);
+
+	/*
+	 * Bail out if the device or its queue are not running. Otherwise,
+	 * the rescan may block waiting for commands to be executed, with us
+	 * holding the device lock. This can result in a potential deadlock
+	 * in the power management core code when system resume is on-going.
+	 */
+	if (sdev->sdev_state != SDEV_RUNNING ||
+	    blk_queue_pm_only(sdev->request_queue)) {
+		ret = -EWOULDBLOCK;
+		goto unlock;
+	}
+
+	if (dev->driver && try_module_get(dev->driver->owner)) {
+		struct scsi_driver *drv = to_scsi_driver(dev->driver);
+
+		if (drv->resume)
+			ret = drv->resume(dev);
+		module_put(dev->driver->owner);
+	}
+
+unlock:
+	device_unlock(dev);
+
+	return ret;
+}
+EXPORT_SYMBOL(scsi_resume_device);
+
 int scsi_rescan_device(struct scsi_device *sdev)
 {
 	struct device *dev = &sdev->sdev_gendev;