scsi: lpfc: add support to retrieve firmware logs

This patch adds the ability to read firmware logs from the adapter. The driver
registers a buffer with the adapter that is then written to by the adapter.
The adapter posts CQEs to indicate content updates in the buffer. While the
adapter is writing to the buffer in a circular fashion, an application will
poll the driver to read the next amount of log data from the buffer.

Driver log buffer size is configurable via the ras_fwlog_buffsize sysfs
attribute. Verbosity to be used by firmware when logging to host memory is
controlled through the ras_fwlog_level attribute.  The ras_fwlog_func
attribute enables or disables loggy by firmware.

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

1 files changed, 45 insertions, 0 deletions

diff --git a/drivers/scsi/lpfc/lpfc_hw4.h b/drivers/scsi/lpfc/lpfc_hw4.h
index 083f8c8706e5..bbd0a57e953f 100644
--- a/drivers/scsi/lpfc/lpfc_hw4.h
+++ b/drivers/scsi/lpfc/lpfc_hw4.h
@@ -186,6 +186,7 @@ struct lpfc_sli_intf {
 #define LPFC_CTL_PDEV_CTL_FRL_ALL	0x00
 #define LPFC_CTL_PDEV_CTL_FRL_FC_FCOE	0x10
 #define LPFC_CTL_PDEV_CTL_FRL_NIC	0x20
+#define LPFC_CTL_PDEV_CTL_DDL_RAS	0x1000000
 
 #define LPFC_FW_DUMP_REQUEST    (LPFC_CTL_PDEV_CTL_DD | LPFC_CTL_PDEV_CTL_FRST)
 
@@ -964,6 +965,7 @@ struct mbox_header {
 /* Subsystem Definitions */
 #define LPFC_MBOX_SUBSYSTEM_NA		0x0
 #define LPFC_MBOX_SUBSYSTEM_COMMON	0x1
+#define LPFC_MBOX_SUBSYSTEM_LOWLEVEL	0xB
 #define LPFC_MBOX_SUBSYSTEM_FCOE	0xC
 
 /* Device Specific Definitions */
@@ -1030,6 +1032,9 @@ struct mbox_header {
 #define LPFC_MBOX_OPCODE_FCOE_LINK_DIAG_STATE		0x22
 #define LPFC_MBOX_OPCODE_FCOE_LINK_DIAG_LOOPBACK	0x23
 
+/* Low level Opcodes */
+#define LPFC_MBOX_OPCODE_SET_DIAG_LOG_OPTION		0x37
+
 /* Mailbox command structures */
 struct eq_context {
 	uint32_t word0;
@@ -1162,6 +1167,45 @@ struct lpfc_mbx_nop {
 	uint32_t context[2];
 };
 
+
+
+struct lpfc_mbx_set_ras_fwlog {
+	struct mbox_header header;
+	union {
+		struct {
+			uint32_t word4;
+#define lpfc_fwlog_enable_SHIFT		0
+#define lpfc_fwlog_enable_MASK		0x00000001
+#define lpfc_fwlog_enable_WORD		word4
+#define lpfc_fwlog_loglvl_SHIFT		8
+#define lpfc_fwlog_loglvl_MASK		0x0000000F
+#define lpfc_fwlog_loglvl_WORD		word4
+#define lpfc_fwlog_ra_SHIFT		15
+#define lpfc_fwlog_ra_WORD		0x00000008
+#define lpfc_fwlog_buffcnt_SHIFT	16
+#define lpfc_fwlog_buffcnt_MASK		0x000000FF
+#define lpfc_fwlog_buffcnt_WORD		word4
+#define lpfc_fwlog_buffsz_SHIFT		24
+#define lpfc_fwlog_buffsz_MASK		0x000000FF
+#define lpfc_fwlog_buffsz_WORD		word4
+			uint32_t word5;
+#define lpfc_fwlog_acqe_SHIFT		0
+#define lpfc_fwlog_acqe_MASK		0x0000FFFF
+#define lpfc_fwlog_acqe_WORD		word5
+#define lpfc_fwlog_cqid_SHIFT		16
+#define lpfc_fwlog_cqid_MASK		0x0000FFFF
+#define lpfc_fwlog_cqid_WORD		word5
+#define LPFC_MAX_FWLOG_PAGE	16
+			struct dma_address lwpd;
+			struct dma_address buff_fwlog[LPFC_MAX_FWLOG_PAGE];
+		} request;
+		struct {
+			uint32_t word0;
+		} response;
+	} u;
+};
+
+
 struct cq_context {
 	uint32_t word0;
 #define lpfc_cq_context_event_SHIFT	31
@@ -3868,6 +3912,7 @@ struct lpfc_mqe {
 		struct lpfc_mbx_memory_dump_type3 mem_dump_type3;
 		struct lpfc_mbx_set_host_data set_host_data;
 		struct lpfc_mbx_nop nop;
+		struct lpfc_mbx_set_ras_fwlog ras_fwlog;
 	} un;
 };