diff options
| author | Christophe Ricard <christophe.ricard@gmail.com> | 2015-10-26 00:54:36 +0300 |
|---|---|---|
| committer | Samuel Ortiz <sameo@linux.intel.com> | 2015-10-27 05:55:01 +0300 |
| commit | b1fa4dc4ffef843bda17f26bbf54fb5d8bc23d2b (patch) | |
| tree | 23444be92a93ba3c6d0f84bff6b522ac92d7023b /drivers/nfc/st-nci/Makefile | |
| parent | ba723199d18eeb5021cd6ace4aaf90670d6b3133 (diff) | |
| download | linux-b1fa4dc4ffef843bda17f26bbf54fb5d8bc23d2b.tar.xz | |
NFC: st-nci: Add support for proprietary commands
Add support for proprietary commands useful mainly for
factory testings. Here is a list:
- FACTORY_MODE: Allow to set the driver into a mode where
no secure element are activated. It does not consider any
NFC_ATTR_VENDOR_DATA.
- HCI_CLEAR_ALL_PIPES: Allow to execute a HCI clear all pipes
command. It does not consider any NFC_ATTR_VENDOR_DATA.
- HCI_DM_PUT_DATA: Allow to configure specific CLF registry
like for example RF trimmings or low level drivers
configurations (I2C, SPI, SWP).
- HCI_DM_UPDATE_AID: Allow to configure an AID routing into the
CLF routing table following RF technology, CLF mode or protocol.
- HCI_DM_GET_INFO: Allow to retrieve CLF information.
- HCI_DM_GET_DATA: Allow to retrieve CLF configurable data such as
low level drivers configurations or RF trimmings.
- HCI_DM_DIRECT_LOAD: Allow to load a firmware into the CLF.
A complete packet can be more than 8KB.
- HCI_DM_RESET: Allow to run a CLF reset in order to "commit" CLF
configuration changes without CLF power off.
- HCI_GET_PARAM: Allow to retrieve an HCI CLF parameter (for example
the white list).
- HCI_DM_FIELD_GENERATOR: Allow to generate different kind of RF
technology. When using this command to anti-collision is done.
- HCI_LOOPBACK: Allow to echo a command and test the Dh to CLF
connectivity.
- HCI_DM_VDC_MEASUREMENT_VALUE: Allow to measure the field applied
on the CLF antenna. A value between 0 and 0x0f is returned. 0 is
maximum.
- HCI_DM_FWUPD_START: Allow to put CLF into firmware update mode.
It is a specific CLF command as there is no GPIO for this.
- HCI_DM_FWUPD_END: Allow to complete firmware update.
- HCI_DM_VDC_VALUE_COMPARISON: Allow to compare the field applied
on the CLF antenna to a reference value.
- MANUFACTURER_SPECIFIC: Allow to retrieve manufacturer specific data
received during a NCI_CORE_INIT_CMD.
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Diffstat (limited to 'drivers/nfc/st-nci/Makefile')
| -rw-r--r-- | drivers/nfc/st-nci/Makefile | 2 |
1 files changed, 1 insertions, 1 deletions
diff --git a/drivers/nfc/st-nci/Makefile b/drivers/nfc/st-nci/Makefile index 594c63d60070..ea40ace05fc2 100644 --- a/drivers/nfc/st-nci/Makefile +++ b/drivers/nfc/st-nci/Makefile @@ -2,7 +2,7 @@ # Makefile for ST21NFCB NCI based NFC driver # -st-nci-objs = ndlc.o core.o se.o +st-nci-objs = ndlc.o core.o se.o vendor_cmds.o obj-$(CONFIG_NFC_ST_NCI) += st-nci.o st-nci_i2c-objs = i2c.o |