Merge tag 'wireless-next-2022-09-30' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next

Kalle Valo says:

====================
wireless-next patches for v6.1

Few stack changes and lots of driver changes in this round. brcmfmac
has more activity as usual and it gets new hardware support. ath11k
improves WCN6750 support and also other smaller features. And of
course changes all over.

Note: in early September wireless tree was merged to wireless-next to
avoid some conflicts with mac80211 patches, this shouldn't cause any
problems but wanted to mention anyway.

Major changes:

mac80211

 - refactoring and preparation for Wi-Fi 7 Multi-Link Operation (MLO)
  feature continues

brcmfmac

 - support CYW43439 SDIO chipset

 - support BCM4378 on Apple platforms

 - support CYW89459 PCIe chipset

rtw89

 - more work to get rtw8852c supported

 - P2P support

 - support for enabling and disabling MSDU aggregation via nl80211

mt76

 - tx status reporting improvements

ath11k

 - cold boot calibration support on WCN6750

 - Target Wake Time (TWT) debugfs support for STA interface

 - support to connect to a non-transmit MBSSID AP profile

 - enable remain-on-channel support on WCN6750

 - implement SRAM dump debugfs interface

 - enable threaded NAPI on all hardware

 - WoW support for WCN6750

 - support to provide transmit power from firmware via nl80211

 - support to get power save duration for each client

 - spectral scan support for 160 MHz

wcn36xx

 - add SNR from a received frame as a source of system entropy

* tag 'wireless-next-2022-09-30' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (231 commits)
  wifi: rtl8xxxu: Improve rtl8xxxu_queue_select
  wifi: rtl8xxxu: Fix AIFS written to REG_EDCA_*_PARAM
  wifi: rtl8xxxu: gen2: Enable 40 MHz channel width
  wifi: rtw89: 8852b: configure DLE mem
  wifi: rtw89: check DLE FIFO size with reserved size
  wifi: rtw89: mac: correct register of report IMR
  wifi: rtw89: pci: set power cut closed for 8852be
  wifi: rtw89: pci: add to do PCI auto calibration
  wifi: rtw89: 8852b: implement chip_ops::{enable,disable}_bb_rf
  wifi: rtw89: add DMA busy checking bits to chip info
  wifi: rtw89: mac: define DMA channel mask to avoid unsupported channels
  wifi: rtw89: pci: mask out unsupported TX channels
  iwlegacy: Replace zero-length arrays with DECLARE_FLEX_ARRAY() helper
  ipw2x00: Replace zero-length array with DECLARE_FLEX_ARRAY() helper
  wifi: iwlwifi: Track scan_cmd allocation size explicitly
  brcmfmac: Remove the call to "dtim_assoc" IOVAR
  brcmfmac: increase dcmd maximum buffer size
  brcmfmac: Support 89459 pcie
  brcmfmac: increase default max WOWL patterns to 16
  cw1200: fix incorrect check to determine if no element is found in list
  ...
====================

Link: https://lore.kernel.org/r/20220930150413.A7984C433D6@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

1 files changed, 5 insertions, 18 deletions

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
index 9fb68c2dc7e3..85e18fb9c497 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
@@ -1154,24 +1154,11 @@ error:
 	return NULL;
 }
 
-static
-int brcmf_usb_get_fwname(struct device *dev, const char *ext, u8 *fw_name)
+static int brcmf_usb_get_blob(struct device *dev, const struct firmware **fw,
+			      enum brcmf_blob_type type)
 {
-	struct brcmf_bus *bus = dev_get_drvdata(dev);
-	struct brcmf_fw_request *fwreq;
-	struct brcmf_fw_name fwnames[] = {
-		{ ext, fw_name },
-	};
-
-	fwreq = brcmf_fw_alloc_request(bus->chip, bus->chiprev,
-				       brcmf_usb_fwnames,
-				       ARRAY_SIZE(brcmf_usb_fwnames),
-				       fwnames, ARRAY_SIZE(fwnames));
-	if (!fwreq)
-		return -ENOMEM;
-
-	kfree(fwreq);
-	return 0;
+	/* No blobs for USB devices... */
+	return -ENOENT;
 }
 
 static const struct brcmf_bus_ops brcmf_usb_bus_ops = {
@@ -1180,7 +1167,7 @@ static const struct brcmf_bus_ops brcmf_usb_bus_ops = {
 	.txdata = brcmf_usb_tx,
 	.txctl = brcmf_usb_tx_ctlpkt,
 	.rxctl = brcmf_usb_rx_ctlpkt,
-	.get_fwname = brcmf_usb_get_fwname,
+	.get_blob = brcmf_usb_get_blob,
 };
 
 #define BRCMF_USB_FW_CODE	0