Merge tag 'net-next-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "Core:

   - Remove socket skb caches

   - Add a SO_RESERVE_MEM socket op to forward allocate buffer space and
     avoid memory accounting overhead on each message sent

   - Introduce managed neighbor entries - added by control plane and
     resolved by the kernel for use in acceleration paths (BPF / XDP
     right now, HW offload users will benefit as well)

   - Make neighbor eviction on link down controllable by userspace to
     work around WiFi networks with bad roaming implementations

   - vrf: Rework interaction with netfilter/conntrack

   - fq_codel: implement L4S style ce_threshold_ect1 marking

   - sch: Eliminate unnecessary RCU waits in mini_qdisc_pair_swap()

  BPF:

   - Add support for new btf kind BTF_KIND_TAG, arbitrary type tagging
     as implemented in LLVM14

   - Introduce bpf_get_branch_snapshot() to capture Last Branch Records

   - Implement variadic trace_printk helper

   - Add a new Bloomfilter map type

   - Track <8-byte scalar spill and refill

   - Access hw timestamp through BPF's __sk_buff

   - Disallow unprivileged BPF by default

   - Document BPF licensing

  Netfilter:

   - Introduce egress hook for looking at raw outgoing packets

   - Allow matching on and modifying inner headers / payload data

   - Add NFT_META_IFTYPE to match on the interface type either from
     ingress or egress

  Protocols:

   - Multi-Path TCP:
      - increase default max additional subflows to 2
      - rework forward memory allocation
      - add getsockopts: MPTCP_INFO, MPTCP_TCPINFO, MPTCP_SUBFLOW_ADDRS

   - MCTP flow support allowing lower layer drivers to configure msg
     muxing as needed

   - Automatic Multicast Tunneling (AMT) driver based on RFC7450

   - HSR support the redbox supervision frames (IEC-62439-3:2018)

   - Support for the ip6ip6 encapsulation of IOAM

   - Netlink interface for CAN-FD's Transmitter Delay Compensation

   - Support SMC-Rv2 eliminating the current same-subnet restriction, by
     exploiting the UDP encapsulation feature of RoCE adapters

   - TLS: add SM4 GCM/CCM crypto support

   - Bluetooth: initial support for link quality and audio/codec offload

  Driver APIs:

   - Add a batched interface for RX buffer allocation in AF_XDP buffer
     pool

   - ethtool: Add ability to control transceiver modules' power mode

   - phy: Introduce supported interfaces bitmap to express MAC
     capabilities and simplify PHY code

   - Drop rtnl_lock from DSA .port_fdb_{add,del} callbacks

  New drivers:

   - WiFi driver for Realtek 8852AE 802.11ax devices (rtw89)

   - Ethernet driver for ASIX AX88796C SPI device (x88796c)

  Drivers:

   - Broadcom PHYs
      - support 72165, 7712 16nm PHYs
      - support IDDQ-SR for additional power savings

   - PHY support for QCA8081, QCA9561 PHYs

   - NXP DPAA2: support for IRQ coalescing

   - NXP Ethernet (enetc): support for software TCP segmentation

   - Renesas Ethernet (ravb) - support DMAC and EMAC blocks of
     Gigabit-capable IP found on RZ/G2L SoC

   - Intel 100G Ethernet
      - support for eswitch offload of TC/OvS flow API, including
        offload of GRE, VxLAN, Geneve tunneling
      - support application device queues - ability to assign Rx and Tx
        queues to application threads
      - PTP and PPS (pulse-per-second) extensions

   - Broadcom Ethernet (bnxt)
      - devlink health reporting and device reload extensions

   - Mellanox Ethernet (mlx5)
      - offload macvlan interfaces
      - support HW offload of TC rules involving OVS internal ports
      - support HW-GRO and header/data split
      - support application device queues

   - Marvell OcteonTx2:
      - add XDP support for PF
      - add PTP support for VF

   - Qualcomm Ethernet switch (qca8k): support for QCA8328

   - Realtek Ethernet DSA switch (rtl8366rb)
      - support bridge offload
      - support STP, fast aging, disabling address learning
      - support for Realtek RTL8365MB-VC, a 4+1 port 10M/100M/1GE switch

   - Mellanox Ethernet/IB switch (mlxsw)
      - multi-level qdisc hierarchy offload (e.g. RED, prio and shaping)
      - offload root TBF qdisc as port shaper
      - support multiple routing interface MAC address prefixes
      - support for IP-in-IP with IPv6 underlay

   - MediaTek WiFi (mt76)
      - mt7921 - ASPM, 6GHz, SDIO and testmode support
      - mt7915 - LED and TWT support

   - Qualcomm WiFi (ath11k)
      - include channel rx and tx time in survey dump statistics
      - support for 80P80 and 160 MHz bandwidths
      - support channel 2 in 6 GHz band
      - spectral scan support for QCN9074
      - support for rx decapsulation offload (data frames in 802.3
        format)

   - Qualcomm phone SoC WiFi (wcn36xx)
      - enable Idle Mode Power Save (IMPS) to reduce power consumption
        during idle

   - Bluetooth driver support for MediaTek MT7922 and MT7921

   - Enable support for AOSP Bluetooth extension in Qualcomm WCN399x and
     Realtek 8822C/8852A

   - Microsoft vNIC driver (mana)
      - support hibernation and kexec

   - Google vNIC driver (gve)
      - support for jumbo frames
      - implement Rx page reuse

  Refactor:

   - Make all writes to netdev->dev_addr go thru helpers, so that we can
     add this address to the address rbtree and handle the updates

   - Various TCP cleanups and optimizations including improvements to
     CPU cache use

   - Simplify the gnet_stats, Qdisc stats' handling and remove
     qdisc->running sequence counter

   - Driver changes and API updates to address devlink locking
     deficiencies"

* tag 'net-next-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2122 commits)
  Revert "net: avoid double accounting for pure zerocopy skbs"
  selftests: net: add arp_ndisc_evict_nocarrier
  net: ndisc: introduce ndisc_evict_nocarrier sysctl parameter
  net: arp: introduce arp_evict_nocarrier sysctl parameter
  libbpf: Deprecate AF_XDP support
  kbuild: Unify options for BTF generation for vmlinux and modules
  selftests/bpf: Add a testcase for 64-bit bounds propagation issue.
  bpf: Fix propagation of signed bounds from 64-bit min/max into 32-bit.
  bpf: Fix propagation of bounds from 64-bit min/max into 32-bit and var_off.
  net: vmxnet3: remove multiple false checks in vmxnet3_ethtool.c
  net: avoid double accounting for pure zerocopy skbs
  tcp: rename sk_wmem_free_skb
  netdevsim: fix uninit value in nsim_drv_configure_vfs()
  selftests/bpf: Fix also no-alu32 strobemeta selftest
  bpf: Add missing map_delete_elem method to bloom filter map
  selftests/bpf: Add bloom map success test for userspace calls
  bpf: Add alignment padding for "map_extra" + consolidate holes
  bpf: Bloom filter map naming fixups
  selftests/bpf: Add test cases for struct_ops prog
  bpf: Add dummy BPF STRUCT_OPS for test purpose
  ...

1 files changed, 104 insertions, 2 deletions

diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c
index 83aea5c5cd03..bb5104ae4610 100644
--- a/drivers/net/phy/broadcom.c
+++ b/drivers/net/phy/broadcom.c
@@ -392,10 +392,50 @@ static int bcm54xx_config_init(struct phy_device *phydev)
 	return 0;
 }
 
+static int bcm54xx_iddq_set(struct phy_device *phydev, bool enable)
+{
+	int ret = 0;
+
+	if (!(phydev->dev_flags & PHY_BRCM_IDDQ_SUSPEND))
+		return ret;
+
+	ret = bcm_phy_read_exp(phydev, BCM54XX_TOP_MISC_IDDQ_CTRL);
+	if (ret < 0)
+		goto out;
+
+	if (enable)
+		ret |= BCM54XX_TOP_MISC_IDDQ_SR | BCM54XX_TOP_MISC_IDDQ_LP;
+	else
+		ret &= ~(BCM54XX_TOP_MISC_IDDQ_SR | BCM54XX_TOP_MISC_IDDQ_LP);
+
+	ret = bcm_phy_write_exp(phydev, BCM54XX_TOP_MISC_IDDQ_CTRL, ret);
+out:
+	return ret;
+}
+
+static int bcm54xx_suspend(struct phy_device *phydev)
+{
+	int ret;
+
+	/* We cannot use a read/modify/write here otherwise the PHY gets into
+	 * a bad state where its LEDs keep flashing, thus defeating the purpose
+	 * of low power mode.
+	 */
+	ret = phy_write(phydev, MII_BMCR, BMCR_PDOWN);
+	if (ret < 0)
+		return ret;
+
+	return bcm54xx_iddq_set(phydev, true);
+}
+
 static int bcm54xx_resume(struct phy_device *phydev)
 {
 	int ret;
 
+	ret = bcm54xx_iddq_set(phydev, false);
+	if (ret < 0)
+		return ret;
+
 	/* Writes to register other than BMCR would be ignored
 	 * unless we clear the PDOWN bit first
 	 */
@@ -408,6 +448,15 @@ static int bcm54xx_resume(struct phy_device *phydev)
 	 */
 	fsleep(40);
 
+	/* Issue a soft reset after clearing the power down bit
+	 * and before doing any other configuration.
+	 */
+	if (phydev->dev_flags & PHY_BRCM_IDDQ_SUSPEND) {
+		ret = genphy_soft_reset(phydev);
+		if (ret < 0)
+			return ret;
+	}
+
 	return bcm54xx_config_init(phydev);
 }
 
@@ -702,6 +751,36 @@ static void bcm54xx_get_stats(struct phy_device *phydev,
 	bcm_phy_get_stats(phydev, priv->stats, stats, data);
 }
 
+static void bcm54xx_link_change_notify(struct phy_device *phydev)
+{
+	u16 mask = MII_BCM54XX_EXP_EXP08_EARLY_DAC_WAKE |
+		   MII_BCM54XX_EXP_EXP08_FORCE_DAC_WAKE;
+	int ret;
+
+	if (phydev->state != PHY_RUNNING)
+		return;
+
+	/* Don't change the DAC wake settings if auto power down
+	 * is not requested.
+	 */
+	if (!(phydev->dev_flags & PHY_BRCM_AUTO_PWRDWN_ENABLE))
+		return;
+
+	ret = bcm_phy_read_exp(phydev, MII_BCM54XX_EXP_EXP08);
+	if (ret < 0)
+		return;
+
+	/* Enable/disable 10BaseT auto and forced early DAC wake depending
+	 * on the negotiated speed, those settings should only be done
+	 * for 10Mbits/sec.
+	 */
+	if (phydev->speed == SPEED_10)
+		ret |= mask;
+	else
+		ret &= ~mask;
+	bcm_phy_write_exp(phydev, MII_BCM54XX_EXP_EXP08, ret);
+}
+
 static struct phy_driver broadcom_drivers[] = {
 {
 	.phy_id		= PHY_ID_BCM5411,
@@ -715,6 +794,7 @@ static struct phy_driver broadcom_drivers[] = {
 	.config_init	= bcm54xx_config_init,
 	.config_intr	= bcm_phy_config_intr,
 	.handle_interrupt = bcm_phy_handle_interrupt,
+	.link_change_notify	= bcm54xx_link_change_notify,
 }, {
 	.phy_id		= PHY_ID_BCM5421,
 	.phy_id_mask	= 0xfffffff0,
@@ -727,6 +807,7 @@ static struct phy_driver broadcom_drivers[] = {
 	.config_init	= bcm54xx_config_init,
 	.config_intr	= bcm_phy_config_intr,
 	.handle_interrupt = bcm_phy_handle_interrupt,
+	.link_change_notify	= bcm54xx_link_change_notify,
 }, {
 	.phy_id		= PHY_ID_BCM54210E,
 	.phy_id_mask	= 0xfffffff0,
@@ -739,6 +820,9 @@ static struct phy_driver broadcom_drivers[] = {
 	.config_init	= bcm54xx_config_init,
 	.config_intr	= bcm_phy_config_intr,
 	.handle_interrupt = bcm_phy_handle_interrupt,
+	.link_change_notify	= bcm54xx_link_change_notify,
+	.suspend	= bcm54xx_suspend,
+	.resume		= bcm54xx_resume,
 }, {
 	.phy_id		= PHY_ID_BCM5461,
 	.phy_id_mask	= 0xfffffff0,
@@ -751,6 +835,7 @@ static struct phy_driver broadcom_drivers[] = {
 	.config_init	= bcm54xx_config_init,
 	.config_intr	= bcm_phy_config_intr,
 	.handle_interrupt = bcm_phy_handle_interrupt,
+	.link_change_notify	= bcm54xx_link_change_notify,
 }, {
 	.phy_id		= PHY_ID_BCM54612E,
 	.phy_id_mask	= 0xfffffff0,
@@ -763,6 +848,7 @@ static struct phy_driver broadcom_drivers[] = {
 	.config_init	= bcm54xx_config_init,
 	.config_intr	= bcm_phy_config_intr,
 	.handle_interrupt = bcm_phy_handle_interrupt,
+	.link_change_notify	= bcm54xx_link_change_notify,
 }, {
 	.phy_id		= PHY_ID_BCM54616S,
 	.phy_id_mask	= 0xfffffff0,
@@ -774,6 +860,7 @@ static struct phy_driver broadcom_drivers[] = {
 	.handle_interrupt = bcm_phy_handle_interrupt,
 	.read_status	= bcm54616s_read_status,
 	.probe		= bcm54616s_probe,
+	.link_change_notify	= bcm54xx_link_change_notify,
 }, {
 	.phy_id		= PHY_ID_BCM5464,
 	.phy_id_mask	= 0xfffffff0,
@@ -788,6 +875,7 @@ static struct phy_driver broadcom_drivers[] = {
 	.handle_interrupt = bcm_phy_handle_interrupt,
 	.suspend	= genphy_suspend,
 	.resume		= genphy_resume,
+	.link_change_notify	= bcm54xx_link_change_notify,
 }, {
 	.phy_id		= PHY_ID_BCM5481,
 	.phy_id_mask	= 0xfffffff0,
@@ -801,6 +889,7 @@ static struct phy_driver broadcom_drivers[] = {
 	.config_aneg	= bcm5481_config_aneg,
 	.config_intr	= bcm_phy_config_intr,
 	.handle_interrupt = bcm_phy_handle_interrupt,
+	.link_change_notify	= bcm54xx_link_change_notify,
 }, {
 	.phy_id         = PHY_ID_BCM54810,
 	.phy_id_mask    = 0xfffffff0,
@@ -814,8 +903,9 @@ static struct phy_driver broadcom_drivers[] = {
 	.config_aneg    = bcm5481_config_aneg,
 	.config_intr    = bcm_phy_config_intr,
 	.handle_interrupt = bcm_phy_handle_interrupt,
-	.suspend	= genphy_suspend,
+	.suspend	= bcm54xx_suspend,
 	.resume		= bcm54xx_resume,
+	.link_change_notify	= bcm54xx_link_change_notify,
 }, {
 	.phy_id         = PHY_ID_BCM54811,
 	.phy_id_mask    = 0xfffffff0,
@@ -829,8 +919,9 @@ static struct phy_driver broadcom_drivers[] = {
 	.config_aneg    = bcm5481_config_aneg,
 	.config_intr    = bcm_phy_config_intr,
 	.handle_interrupt = bcm_phy_handle_interrupt,
-	.suspend	= genphy_suspend,
+	.suspend	= bcm54xx_suspend,
 	.resume		= bcm54xx_resume,
+	.link_change_notify	= bcm54xx_link_change_notify,
 }, {
 	.phy_id		= PHY_ID_BCM5482,
 	.phy_id_mask	= 0xfffffff0,
@@ -843,6 +934,7 @@ static struct phy_driver broadcom_drivers[] = {
 	.config_init	= bcm54xx_config_init,
 	.config_intr	= bcm_phy_config_intr,
 	.handle_interrupt = bcm_phy_handle_interrupt,
+	.link_change_notify	= bcm54xx_link_change_notify,
 }, {
 	.phy_id		= PHY_ID_BCM50610,
 	.phy_id_mask	= 0xfffffff0,
@@ -855,6 +947,9 @@ static struct phy_driver broadcom_drivers[] = {
 	.config_init	= bcm54xx_config_init,
 	.config_intr	= bcm_phy_config_intr,
 	.handle_interrupt = bcm_phy_handle_interrupt,
+	.link_change_notify	= bcm54xx_link_change_notify,
+	.suspend	= bcm54xx_suspend,
+	.resume		= bcm54xx_resume,
 }, {
 	.phy_id		= PHY_ID_BCM50610M,
 	.phy_id_mask	= 0xfffffff0,
@@ -867,6 +962,9 @@ static struct phy_driver broadcom_drivers[] = {
 	.config_init	= bcm54xx_config_init,
 	.config_intr	= bcm_phy_config_intr,
 	.handle_interrupt = bcm_phy_handle_interrupt,
+	.link_change_notify	= bcm54xx_link_change_notify,
+	.suspend	= bcm54xx_suspend,
+	.resume		= bcm54xx_resume,
 }, {
 	.phy_id		= PHY_ID_BCM57780,
 	.phy_id_mask	= 0xfffffff0,
@@ -879,6 +977,7 @@ static struct phy_driver broadcom_drivers[] = {
 	.config_init	= bcm54xx_config_init,
 	.config_intr	= bcm_phy_config_intr,
 	.handle_interrupt = bcm_phy_handle_interrupt,
+	.link_change_notify	= bcm54xx_link_change_notify,
 }, {
 	.phy_id		= PHY_ID_BCMAC131,
 	.phy_id_mask	= 0xfffffff0,
@@ -905,6 +1004,7 @@ static struct phy_driver broadcom_drivers[] = {
 	.get_strings	= bcm_phy_get_strings,
 	.get_stats	= bcm54xx_get_stats,
 	.probe		= bcm54xx_phy_probe,
+	.link_change_notify	= bcm54xx_link_change_notify,
 }, {
 	.phy_id		= PHY_ID_BCM53125,
 	.phy_id_mask	= 0xfffffff0,
@@ -918,6 +1018,7 @@ static struct phy_driver broadcom_drivers[] = {
 	.config_init	= bcm54xx_config_init,
 	.config_intr	= bcm_phy_config_intr,
 	.handle_interrupt = bcm_phy_handle_interrupt,
+	.link_change_notify	= bcm54xx_link_change_notify,
 }, {
 	.phy_id         = PHY_ID_BCM89610,
 	.phy_id_mask    = 0xfffffff0,
@@ -930,6 +1031,7 @@ static struct phy_driver broadcom_drivers[] = {
 	.config_init    = bcm54xx_config_init,
 	.config_intr    = bcm_phy_config_intr,
 	.handle_interrupt = bcm_phy_handle_interrupt,
+	.link_change_notify	= bcm54xx_link_change_notify,
 } };
 
 module_phy_driver(broadcom_drivers);