net: pcs: xpcs: adapt Wangxun NICs for SGMII mode

Wangxun NICs support the connection with SFP to RJ45 module. In this case,
PCS need to be configured in SGMII mode.

According to chapter 6.11.1 "SGMII Auto-Negitiation" of DesignWare Cores
Ethernet PCS (version 3.20a) and custom design manual, do the following
configuration when the interface mode is SGMII.

1. program VR_MII_AN_CTRL bit(3) [TX_CONFIG] = 1b (PHY side SGMII)
2. program VR_MII_AN_CTRL bit(8) [MII_CTRL] = 1b (8-bit MII)
3. program VR_MII_DIG_CTRL1 bit(0) [PHY_MODE_CTRL] = 1b

Also CL37 AN in backplane configurations need to be enabled because of the
special hardware design. Another thing to note is that PMA needs to be
reconfigured before each CL37 AN configuration for SGMII, otherwise AN will
fail, although we don't know why.

On this device, CL37_ANSGM_STS (bit[4:1] of VR_MII_AN_INTR_STS) indicates
the status received from remote link during the auto-negotiation, and
self-clear after the auto-negotiation is complete.
Meanwhile, CL37_ANCMPLT_INTR will be set to 1, to indicate CL37 AN is
complete. So add another way to get the state for CL37 SGMII.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 43 insertions, 4 deletions

diff --git a/drivers/net/pcs/pcs-xpcs.c b/drivers/net/pcs/pcs-xpcs.c
index b806a9beecde..4dbc21f604f2 100644
--- a/drivers/net/pcs/pcs-xpcs.c
+++ b/drivers/net/pcs/pcs-xpcs.c
@@ -683,7 +683,10 @@ EXPORT_SYMBOL_GPL(xpcs_config_eee);
 static int xpcs_config_aneg_c37_sgmii(struct dw_xpcs *xpcs,
 				      unsigned int neg_mode)
 {
-	int ret, mdio_ctrl;
+	int ret, mdio_ctrl, tx_conf;
+
+	if (xpcs->dev_flag == DW_DEV_TXGBE)
+		xpcs_write_vpcs(xpcs, DW_VR_XS_PCS_DIG_CTRL1, DW_CL37_BP | DW_EN_VSMMD1);
 
 	/* For AN for C37 SGMII mode, the settings are :-
 	 * 1) VR_MII_MMD_CTRL Bit(12) [AN_ENABLE] = 0b (Disable SGMII AN in case
@@ -720,9 +723,15 @@ static int xpcs_config_aneg_c37_sgmii(struct dw_xpcs *xpcs,
 	ret |= (DW_VR_MII_PCS_MODE_C37_SGMII <<
 		DW_VR_MII_AN_CTRL_PCS_MODE_SHIFT &
 		DW_VR_MII_PCS_MODE_MASK);
-	ret |= (DW_VR_MII_TX_CONFIG_MAC_SIDE_SGMII <<
-		DW_VR_MII_AN_CTRL_TX_CONFIG_SHIFT &
-		DW_VR_MII_TX_CONFIG_MASK);
+	if (xpcs->dev_flag == DW_DEV_TXGBE) {
+		ret |= DW_VR_MII_AN_CTRL_8BIT;
+		/* Hardware requires it to be PHY side SGMII */
+		tx_conf = DW_VR_MII_TX_CONFIG_PHY_SIDE_SGMII;
+	} else {
+		tx_conf = DW_VR_MII_TX_CONFIG_MAC_SIDE_SGMII;
+	}
+	ret |= tx_conf << DW_VR_MII_AN_CTRL_TX_CONFIG_SHIFT &
+		DW_VR_MII_TX_CONFIG_MASK;
 	ret = xpcs_write(xpcs, MDIO_MMD_VEND2, DW_VR_MII_AN_CTRL, ret);
 	if (ret < 0)
 		return ret;
@@ -736,6 +745,9 @@ static int xpcs_config_aneg_c37_sgmii(struct dw_xpcs *xpcs,
 	else
 		ret &= ~DW_VR_MII_DIG_CTRL1_MAC_AUTO_SW;
 
+	if (xpcs->dev_flag == DW_DEV_TXGBE)
+		ret |= DW_VR_MII_DIG_CTRL1_PHY_MODE_CTRL;
+
 	ret = xpcs_write(xpcs, MDIO_MMD_VEND2, DW_VR_MII_DIG_CTRL1, ret);
 	if (ret < 0)
 		return ret;
@@ -1011,6 +1023,33 @@ static int xpcs_get_state_c37_sgmii(struct dw_xpcs *xpcs,
 			state->duplex = DUPLEX_FULL;
 		else
 			state->duplex = DUPLEX_HALF;
+	} else if (ret == DW_VR_MII_AN_STS_C37_ANCMPLT_INTR) {
+		int speed, duplex;
+
+		state->link = true;
+
+		speed = xpcs_read(xpcs, MDIO_MMD_VEND2, MDIO_CTRL1);
+		if (speed < 0)
+			return speed;
+
+		speed &= SGMII_SPEED_SS13 | SGMII_SPEED_SS6;
+		if (speed == SGMII_SPEED_SS6)
+			state->speed = SPEED_1000;
+		else if (speed == SGMII_SPEED_SS13)
+			state->speed = SPEED_100;
+		else if (speed == 0)
+			state->speed = SPEED_10;
+
+		duplex = xpcs_read(xpcs, MDIO_MMD_VEND2, MII_ADVERTISE);
+		if (duplex < 0)
+			return duplex;
+
+		if (duplex & DW_FULL_DUPLEX)
+			state->duplex = DUPLEX_FULL;
+		else if (duplex & DW_HALF_DUPLEX)
+			state->duplex = DUPLEX_HALF;
+
+		xpcs_write(xpcs, MDIO_MMD_VEND2, DW_VR_MII_AN_INTR_STS, 0);
 	}
 
 	return 0;