sis*: Move the Silicon Integrated Systems (SiS) drivers

Move the SiS drivers into drivers/net/ethernet/sis/ and make the
necessary Kconfig and Makefile changes

CC: Daniele Venzano <venza@brownhat.org>
CC: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

7 files changed, 4837 insertions, 0 deletions

diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index 97542479c01f..b15b1e2ed398 100644
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
@@ -42,6 +42,7 @@ source "drivers/net/ethernet/qlogic/Kconfig"
 source "drivers/net/ethernet/racal/Kconfig"
 source "drivers/net/ethernet/realtek/Kconfig"
 source "drivers/net/ethernet/seeq/Kconfig"
+source "drivers/net/ethernet/sis/Kconfig"
 source "drivers/net/ethernet/sfc/Kconfig"
 source "drivers/net/ethernet/sgi/Kconfig"
 source "drivers/net/ethernet/smsc/Kconfig"
diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
index 7e7a319e7187..1f45ec9a9dca 100644
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile
@@ -33,6 +33,7 @@ obj-$(CONFIG_NET_VENDOR_QLOGIC) += qlogic/
 obj-$(CONFIG_NET_VENDOR_RACAL) += racal/
 obj-$(CONFIG_NET_VENDOR_REALTEK) += realtek/
 obj-$(CONFIG_NET_VENDOR_SEEQ) += seeq/
+obj-$(CONFIG_NET_VENDOR_SIS) += sis/
 obj-$(CONFIG_SFC) += sfc/
 obj-$(CONFIG_NET_VENDOR_SGI) += sgi/
 obj-$(CONFIG_NET_VENDOR_SMSC) += smsc/
diff --git a/drivers/net/ethernet/sis/Kconfig b/drivers/net/ethernet/sis/Kconfig
new file mode 100644
index 000000000000..01d43e870eeb
--- /dev/null
+++ b/drivers/net/ethernet/sis/Kconfig
@@ -0,0 +1,50 @@
+#
+# Silicon Integrated Systems (SiS) device configuration
+#
+
+config NET_VENDOR_SIS
+	bool "Silicon Integrated Systems (SiS) devices"
+	depends on PCI
+	---help---
+	  If you have a network (Ethernet) card belonging to this class, say Y
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about SiS devices. If you say Y, you will be asked for
+	  your specific card in the following questions.
+
+if NET_VENDOR_SIS
+
+config SIS900
+	tristate "SiS 900/7016 PCI Fast Ethernet Adapter support"
+	depends on PCI
+	select CRC32
+	select MII
+	---help---
+	  This is a driver for the Fast Ethernet PCI network cards based on
+	  the SiS 900 and SiS 7016 chips. The SiS 900 core is also embedded in
+	  SiS 630 and SiS 540 chipsets.
+
+	  This driver also supports AMD 79C901 HomePNA so that you can use
+	  your phone line as a network cable.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called sis900.  This is recommended.
+
+config SIS190
+	tristate "SiS190/SiS191 gigabit ethernet support"
+	depends on PCI
+	select CRC32
+	select MII
+	---help---
+	  Say Y here if you have a SiS 190 PCI Fast Ethernet adapter or
+	  a SiS 191 PCI Gigabit Ethernet adapter. Both are expected to
+	  appear in lan on motherboard designs which are based on SiS 965
+	  and SiS 966 south bridge.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called sis190.  This is recommended.
+
+endif # NET_VENDOR_SIS
diff --git a/drivers/net/ethernet/sis/Makefile b/drivers/net/ethernet/sis/Makefile
new file mode 100644
index 000000000000..58d3ac1985df
--- /dev/null
+++ b/drivers/net/ethernet/sis/Makefile
@@ -0,0 +1,6 @@
+#
+# Makefile for Silicon Integrated Systems (SiS) network device drivers.
+#
+
+obj-$(CONFIG_SIS190) += sis190.o
+obj-$(CONFIG_SIS900) += sis900.o
diff --git a/drivers/net/ethernet/sis/sis190.c b/drivers/net/ethernet/sis/sis190.c
new file mode 100644
index 000000000000..3c0f1312b391
--- /dev/null
+++ b/drivers/net/ethernet/sis/sis190.c
@@ -0,0 +1,1956 @@
+/*
+   sis190.c: Silicon Integrated Systems SiS190 ethernet driver
+
+   Copyright (c) 2003 K.M. Liu <kmliu@sis.com>
+   Copyright (c) 2003, 2004 Jeff Garzik <jgarzik@pobox.com>
+   Copyright (c) 2003, 2004, 2005 Francois Romieu <romieu@fr.zoreil.com>
+
+   Based on r8169.c, tg3.c, 8139cp.c, skge.c, epic100.c and SiS 190/191
+   genuine driver.
+
+   This software may be used and distributed according to the terms of
+   the GNU General Public License (GPL), incorporated herein by reference.
+   Drivers based on or derived from this code fall under the GPL and must
+   retain the authorship, copyright and license notice.  This file is not
+   a complete program and may only be used when the entire operating
+   system is licensed under the GPL.
+
+   See the file COPYING in this distribution for more information.
+
+*/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/netdevice.h>
+#include <linux/rtnetlink.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/pci.h>
+#include <linux/mii.h>
+#include <linux/delay.h>
+#include <linux/crc32.h>
+#include <linux/dma-mapping.h>
+#include <linux/slab.h>
+#include <asm/irq.h>
+
+#define PHY_MAX_ADDR		32
+#define PHY_ID_ANY		0x1f
+#define MII_REG_ANY		0x1f
+
+#define DRV_VERSION		"1.4"
+#define DRV_NAME		"sis190"
+#define SIS190_DRIVER_NAME	DRV_NAME " Gigabit Ethernet driver " DRV_VERSION
+
+#define sis190_rx_skb			netif_rx
+#define sis190_rx_quota(count, quota)	count
+
+#define MAC_ADDR_LEN		6
+
+#define NUM_TX_DESC		64	/* [8..1024] */
+#define NUM_RX_DESC		64	/* [8..8192] */
+#define TX_RING_BYTES		(NUM_TX_DESC * sizeof(struct TxDesc))
+#define RX_RING_BYTES		(NUM_RX_DESC * sizeof(struct RxDesc))
+#define RX_BUF_SIZE		1536
+#define RX_BUF_MASK		0xfff8
+
+#define SIS190_REGS_SIZE	0x80
+#define SIS190_TX_TIMEOUT	(6*HZ)
+#define SIS190_PHY_TIMEOUT	(10*HZ)
+#define SIS190_MSG_DEFAULT	(NETIF_MSG_DRV | NETIF_MSG_PROBE | \
+				 NETIF_MSG_LINK | NETIF_MSG_IFUP | \
+				 NETIF_MSG_IFDOWN)
+
+/* Enhanced PHY access register bit definitions */
+#define EhnMIIread		0x0000
+#define EhnMIIwrite		0x0020
+#define EhnMIIdataShift		16
+#define EhnMIIpmdShift		6	/* 7016 only */
+#define EhnMIIregShift		11
+#define EhnMIIreq		0x0010
+#define EhnMIInotDone		0x0010
+
+/* Write/read MMIO register */
+#define SIS_W8(reg, val)	writeb ((val), ioaddr + (reg))
+#define SIS_W16(reg, val)	writew ((val), ioaddr + (reg))
+#define SIS_W32(reg, val)	writel ((val), ioaddr + (reg))
+#define SIS_R8(reg)		readb (ioaddr + (reg))
+#define SIS_R16(reg)		readw (ioaddr + (reg))
+#define SIS_R32(reg)		readl (ioaddr + (reg))
+
+#define SIS_PCI_COMMIT()	SIS_R32(IntrControl)
+
+enum sis190_registers {
+	TxControl		= 0x00,
+	TxDescStartAddr		= 0x04,
+	rsv0			= 0x08,	// reserved
+	TxSts			= 0x0c,	// unused (Control/Status)
+	RxControl		= 0x10,
+	RxDescStartAddr		= 0x14,
+	rsv1			= 0x18,	// reserved
+	RxSts			= 0x1c,	// unused
+	IntrStatus		= 0x20,
+	IntrMask		= 0x24,
+	IntrControl		= 0x28,
+	IntrTimer		= 0x2c,	// unused (Interrupt Timer)
+	PMControl		= 0x30,	// unused (Power Mgmt Control/Status)
+	rsv2			= 0x34,	// reserved
+	ROMControl		= 0x38,
+	ROMInterface		= 0x3c,
+	StationControl		= 0x40,
+	GMIIControl		= 0x44,
+	GIoCR			= 0x48, // unused (GMAC IO Compensation)
+	GIoCtrl			= 0x4c, // unused (GMAC IO Control)
+	TxMacControl		= 0x50,
+	TxLimit			= 0x54, // unused (Tx MAC Timer/TryLimit)
+	RGDelay			= 0x58, // unused (RGMII Tx Internal Delay)
+	rsv3			= 0x5c, // reserved
+	RxMacControl		= 0x60,
+	RxMacAddr		= 0x62,
+	RxHashTable		= 0x68,
+	// Undocumented		= 0x6c,
+	RxWolCtrl		= 0x70,
+	RxWolData		= 0x74, // unused (Rx WOL Data Access)
+	RxMPSControl		= 0x78,	// unused (Rx MPS Control)
+	rsv4			= 0x7c, // reserved
+};
+
+enum sis190_register_content {
+	/* IntrStatus */
+	SoftInt			= 0x40000000,	// unused
+	Timeup			= 0x20000000,	// unused
+	PauseFrame		= 0x00080000,	// unused
+	MagicPacket		= 0x00040000,	// unused
+	WakeupFrame		= 0x00020000,	// unused
+	LinkChange		= 0x00010000,
+	RxQEmpty		= 0x00000080,
+	RxQInt			= 0x00000040,
+	TxQ1Empty		= 0x00000020,	// unused
+	TxQ1Int			= 0x00000010,
+	TxQ0Empty		= 0x00000008,	// unused
+	TxQ0Int			= 0x00000004,
+	RxHalt			= 0x00000002,
+	TxHalt			= 0x00000001,
+
+	/* {Rx/Tx}CmdBits */
+	CmdReset		= 0x10,
+	CmdRxEnb		= 0x08,		// unused
+	CmdTxEnb		= 0x01,
+	RxBufEmpty		= 0x01,		// unused
+
+	/* Cfg9346Bits */
+	Cfg9346_Lock		= 0x00,		// unused
+	Cfg9346_Unlock		= 0xc0,		// unused
+
+	/* RxMacControl */
+	AcceptErr		= 0x20,		// unused
+	AcceptRunt		= 0x10,		// unused
+	AcceptBroadcast		= 0x0800,
+	AcceptMulticast		= 0x0400,
+	AcceptMyPhys		= 0x0200,
+	AcceptAllPhys		= 0x0100,
+
+	/* RxConfigBits */
+	RxCfgFIFOShift		= 13,
+	RxCfgDMAShift		= 8,		// 0x1a in RxControl ?
+
+	/* TxConfigBits */
+	TxInterFrameGapShift	= 24,
+	TxDMAShift		= 8, /* DMA burst value (0-7) is shift this many bits */
+
+	LinkStatus		= 0x02,		// unused
+	FullDup			= 0x01,		// unused
+
+	/* TBICSRBit */
+	TBILinkOK		= 0x02000000,	// unused
+};
+
+struct TxDesc {
+	__le32 PSize;
+	__le32 status;
+	__le32 addr;
+	__le32 size;
+};
+
+struct RxDesc {
+	__le32 PSize;
+	__le32 status;
+	__le32 addr;
+	__le32 size;
+};
+
+enum _DescStatusBit {
+	/* _Desc.status */
+	OWNbit		= 0x80000000, // RXOWN/TXOWN
+	INTbit		= 0x40000000, // RXINT/TXINT
+	CRCbit		= 0x00020000, // CRCOFF/CRCEN
+	PADbit		= 0x00010000, // PREADD/PADEN
+	/* _Desc.size */
+	RingEnd		= 0x80000000,
+	/* TxDesc.status */
+	LSEN		= 0x08000000, // TSO ? -- FR
+	IPCS		= 0x04000000,
+	TCPCS		= 0x02000000,
+	UDPCS		= 0x01000000,
+	BSTEN		= 0x00800000,
+	EXTEN		= 0x00400000,
+	DEFEN		= 0x00200000,
+	BKFEN		= 0x00100000,
+	CRSEN		= 0x00080000,
+	COLEN		= 0x00040000,
+	THOL3		= 0x30000000,
+	THOL2		= 0x20000000,
+	THOL1		= 0x10000000,
+	THOL0		= 0x00000000,
+
+	WND		= 0x00080000,
+	TABRT		= 0x00040000,
+	FIFO		= 0x00020000,
+	LINK		= 0x00010000,
+	ColCountMask	= 0x0000ffff,
+	/* RxDesc.status */
+	IPON		= 0x20000000,
+	TCPON		= 0x10000000,
+	UDPON		= 0x08000000,
+	Wakup		= 0x00400000,
+	Magic		= 0x00200000,
+	Pause		= 0x00100000,
+	DEFbit		= 0x00200000,
+	BCAST		= 0x000c0000,
+	MCAST		= 0x00080000,
+	UCAST		= 0x00040000,
+	/* RxDesc.PSize */
+	TAGON		= 0x80000000,
+	RxDescCountMask	= 0x7f000000, // multi-desc pkt when > 1 ? -- FR
+	ABORT		= 0x00800000,
+	SHORT		= 0x00400000,
+	LIMIT		= 0x00200000,
+	MIIER		= 0x00100000,
+	OVRUN		= 0x00080000,
+	NIBON		= 0x00040000,
+	COLON		= 0x00020000,
+	CRCOK		= 0x00010000,
+	RxSizeMask	= 0x0000ffff
+	/*
+	 * The asic could apparently do vlan, TSO, jumbo (sis191 only) and
+	 * provide two (unused with Linux) Tx queues. No publicly
+	 * available documentation alas.
+	 */
+};
+
+enum sis190_eeprom_access_register_bits {
+	EECS	= 0x00000001,	// unused
+	EECLK	= 0x00000002,	// unused
+	EEDO	= 0x00000008,	// unused
+	EEDI	= 0x00000004,	// unused
+	EEREQ	= 0x00000080,
+	EEROP	= 0x00000200,
+	EEWOP	= 0x00000100	// unused
+};
+
+/* EEPROM Addresses */
+enum sis190_eeprom_address {
+	EEPROMSignature	= 0x00,
+	EEPROMCLK	= 0x01,	// unused
+	EEPROMInfo	= 0x02,
+	EEPROMMACAddr	= 0x03
+};
+
+enum sis190_feature {
+	F_HAS_RGMII	= 1,
+	F_PHY_88E1111	= 2,
+	F_PHY_BCM5461	= 4
+};
+
+struct sis190_private {
+	void __iomem *mmio_addr;
+	struct pci_dev *pci_dev;
+	struct net_device *dev;
+	spinlock_t lock;
+	u32 rx_buf_sz;
+	u32 cur_rx;
+	u32 cur_tx;
+	u32 dirty_rx;
+	u32 dirty_tx;
+	dma_addr_t rx_dma;
+	dma_addr_t tx_dma;
+	struct RxDesc *RxDescRing;
+	struct TxDesc *TxDescRing;
+	struct sk_buff *Rx_skbuff[NUM_RX_DESC];
+	struct sk_buff *Tx_skbuff[NUM_TX_DESC];
+	struct work_struct phy_task;
+	struct timer_list timer;
+	u32 msg_enable;
+	struct mii_if_info mii_if;
+	struct list_head first_phy;
+	u32 features;
+	u32 negotiated_lpa;
+	enum {
+		LNK_OFF,
+		LNK_ON,
+		LNK_AUTONEG,
+	} link_status;
+};
+
+struct sis190_phy {
+	struct list_head list;
+	int phy_id;
+	u16 id[2];
+	u16 status;
+	u8  type;
+};
+
+enum sis190_phy_type {
+	UNKNOWN	= 0x00,
+	HOME	= 0x01,
+	LAN	= 0x02,
+	MIX	= 0x03
+};
+
+static struct mii_chip_info {
+        const char *name;
+        u16 id[2];
+        unsigned int type;
+	u32 feature;
+} mii_chip_table[] = {
+	{ "Atheros PHY",          { 0x004d, 0xd010 }, LAN, 0 },
+	{ "Atheros PHY AR8012",   { 0x004d, 0xd020 }, LAN, 0 },
+	{ "Broadcom PHY BCM5461", { 0x0020, 0x60c0 }, LAN, F_PHY_BCM5461 },
+	{ "Broadcom PHY AC131",   { 0x0143, 0xbc70 }, LAN, 0 },
+	{ "Agere PHY ET1101B",    { 0x0282, 0xf010 }, LAN, 0 },
+	{ "Marvell PHY 88E1111",  { 0x0141, 0x0cc0 }, LAN, F_PHY_88E1111 },
+	{ "Realtek PHY RTL8201",  { 0x0000, 0x8200 }, LAN, 0 },
+	{ NULL, }
+};
+
+static const struct {
+	const char *name;
+} sis_chip_info[] = {
+	{ "SiS 190 PCI Fast Ethernet adapter" },
+	{ "SiS 191 PCI Gigabit Ethernet adapter" },
+};
+
+static DEFINE_PCI_DEVICE_TABLE(sis190_pci_tbl) = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_SI, 0x0190), 0, 0, 0 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_SI, 0x0191), 0, 0, 1 },
+	{ 0, },
+};
+
+MODULE_DEVICE_TABLE(pci, sis190_pci_tbl);
+
+static int rx_copybreak = 200;
+
+static struct {
+	u32 msg_enable;
+} debug = { -1 };
+
+MODULE_DESCRIPTION("SiS sis190/191 Gigabit Ethernet driver");
+module_param(rx_copybreak, int, 0);
+MODULE_PARM_DESC(rx_copybreak, "Copy breakpoint for copy-only-tiny-frames");
+module_param_named(debug, debug.msg_enable, int, 0);
+MODULE_PARM_DESC(debug, "Debug verbosity level (0=none, ..., 16=all)");
+MODULE_AUTHOR("K.M. Liu <kmliu@sis.com>, Ueimor <romieu@fr.zoreil.com>");
+MODULE_VERSION(DRV_VERSION);
+MODULE_LICENSE("GPL");
+
+static const u32 sis190_intr_mask =
+	RxQEmpty | RxQInt | TxQ1Int | TxQ0Int | RxHalt | TxHalt | LinkChange;
+
+/*
+ * Maximum number of multicast addresses to filter (vs. Rx-all-multicast).
+ * The chips use a 64 element hash table based on the Ethernet CRC.
+ */
+static const int multicast_filter_limit = 32;
+
+static void __mdio_cmd(void __iomem *ioaddr, u32 ctl)
+{
+	unsigned int i;
+
+	SIS_W32(GMIIControl, ctl);
+
+	msleep(1);
+
+	for (i = 0; i < 100; i++) {
+		if (!(SIS_R32(GMIIControl) & EhnMIInotDone))
+			break;
+		msleep(1);
+	}
+
+	if (i > 99)
+		pr_err("PHY command failed !\n");
+}
+
+static void mdio_write(void __iomem *ioaddr, int phy_id, int reg, int val)
+{
+	__mdio_cmd(ioaddr, EhnMIIreq | EhnMIIwrite |
+		(((u32) reg) << EhnMIIregShift) | (phy_id << EhnMIIpmdShift) |
+		(((u32) val) << EhnMIIdataShift));
+}
+
+static int mdio_read(void __iomem *ioaddr, int phy_id, int reg)
+{
+	__mdio_cmd(ioaddr, EhnMIIreq | EhnMIIread |
+		(((u32) reg) << EhnMIIregShift) | (phy_id << EhnMIIpmdShift));
+
+	return (u16) (SIS_R32(GMIIControl) >> EhnMIIdataShift);
+}
+
+static void __mdio_write(struct net_device *dev, int phy_id, int reg, int val)
+{
+	struct sis190_private *tp = netdev_priv(dev);
+
+	mdio_write(tp->mmio_addr, phy_id, reg, val);
+}
+
+static int __mdio_read(struct net_device *dev, int phy_id, int reg)
+{
+	struct sis190_private *tp = netdev_priv(dev);
+
+	return mdio_read(tp->mmio_addr, phy_id, reg);
+}
+
+static u16 mdio_read_latched(void __iomem *ioaddr, int phy_id, int reg)
+{
+	mdio_read(ioaddr, phy_id, reg);
+	return mdio_read(ioaddr, phy_id, reg);
+}
+
+static u16 __devinit sis190_read_eeprom(void __iomem *ioaddr, u32 reg)
+{
+	u16 data = 0xffff;
+	unsigned int i;
+
+	if (!(SIS_R32(ROMControl) & 0x0002))
+		return 0;
+
+	SIS_W32(ROMInterface, EEREQ | EEROP | (reg << 10));
+
+	for (i = 0; i < 200; i++) {
+		if (!(SIS_R32(ROMInterface) & EEREQ)) {
+			data = (SIS_R32(ROMInterface) & 0xffff0000) >> 16;
+			break;
+		}
+		msleep(1);
+	}
+
+	return data;
+}
+
+static void sis190_irq_mask_and_ack(void __iomem *ioaddr)
+{
+	SIS_W32(IntrMask, 0x00);
+	SIS_W32(IntrStatus, 0xffffffff);
+	SIS_PCI_COMMIT();
+}
+
+static void sis190_asic_down(void __iomem *ioaddr)
+{
+	/* Stop the chip's Tx and Rx DMA processes. */
+
+	SIS_W32(TxControl, 0x1a00);
+	SIS_W32(RxControl, 0x1a00);
+
+	sis190_irq_mask_and_ack(ioaddr);
+}
+
+static void sis190_mark_as_last_descriptor(struct RxDesc *desc)
+{
+	desc->size |= cpu_to_le32(RingEnd);
+}
+
+static inline void sis190_give_to_asic(struct RxDesc *desc, u32 rx_buf_sz)
+{
+	u32 eor = le32_to_cpu(desc->size) & RingEnd;
+
+	desc->PSize = 0x0;
+	desc->size = cpu_to_le32((rx_buf_sz & RX_BUF_MASK) | eor);
+	wmb();
+	desc->status = cpu_to_le32(OWNbit | INTbit);
+}
+
+static inline void sis190_map_to_asic(struct RxDesc *desc, dma_addr_t mapping,
+				      u32 rx_buf_sz)
+{
+	desc->addr = cpu_to_le32(mapping);
+	sis190_give_to_asic(desc, rx_buf_sz);
+}
+
+static inline void sis190_make_unusable_by_asic(struct RxDesc *desc)
+{
+	desc->PSize = 0x0;
+	desc->addr = cpu_to_le32(0xdeadbeef);
+	desc->size &= cpu_to_le32(RingEnd);
+	wmb();
+	desc->status = 0x0;
+}
+
+static struct sk_buff *sis190_alloc_rx_skb(struct sis190_private *tp,
+					   struct RxDesc *desc)
+{
+	u32 rx_buf_sz = tp->rx_buf_sz;
+	struct sk_buff *skb;
+	dma_addr_t mapping;
+
+	skb = netdev_alloc_skb(tp->dev, rx_buf_sz);
+	if (unlikely(!skb))
+		goto skb_alloc_failed;
+	mapping = pci_map_single(tp->pci_dev, skb->data, tp->rx_buf_sz,
+			PCI_DMA_FROMDEVICE);
+	if (pci_dma_mapping_error(tp->pci_dev, mapping))
+		goto out;
+	sis190_map_to_asic(desc, mapping, rx_buf_sz);
+
+	return skb;
+
+out:
+	dev_kfree_skb_any(skb);
+skb_alloc_failed:
+	sis190_make_unusable_by_asic(desc);
+	return NULL;
+}
+
+static u32 sis190_rx_fill(struct sis190_private *tp, struct net_device *dev,
+			  u32 start, u32 end)
+{
+	u32 cur;
+
+	for (cur = start; cur < end; cur++) {
+		unsigned int i = cur % NUM_RX_DESC;
+
+		if (tp->Rx_skbuff[i])
+			continue;
+
+		tp->Rx_skbuff[i] = sis190_alloc_rx_skb(tp, tp->RxDescRing + i);
+
+		if (!tp->Rx_skbuff[i])
+			break;
+	}
+	return cur - start;
+}
+
+static bool sis190_try_rx_copy(struct sis190_private *tp,
+			       struct sk_buff **sk_buff, int pkt_size,
+			       dma_addr_t addr)
+{
+	struct sk_buff *skb;
+	bool done = false;
+
+	if (pkt_size >= rx_copybreak)
+		goto out;
+
+	skb = netdev_alloc_skb_ip_align(tp->dev, pkt_size);
+	if (!skb)
+		goto out;
+
+	pci_dma_sync_single_for_cpu(tp->pci_dev, addr, tp->rx_buf_sz,
+				PCI_DMA_FROMDEVICE);
+	skb_copy_to_linear_data(skb, sk_buff[0]->data, pkt_size);
+	*sk_buff = skb;
+	done = true;
+out:
+	return done;
+}
+
+static inline int sis190_rx_pkt_err(u32 status, struct net_device_stats *stats)
+{
+#define ErrMask	(OVRUN | SHORT | LIMIT | MIIER | NIBON | COLON | ABORT)
+
+	if ((status & CRCOK) && !(status & ErrMask))
+		return 0;
+
+	if (!(status & CRCOK))
+		stats->rx_crc_errors++;
+	else if (status & OVRUN)
+		stats->rx_over_errors++;
+	else if (status & (SHORT | LIMIT))
+		stats->rx_length_errors++;
+	else if (status & (MIIER | NIBON | COLON))
+		stats->rx_frame_errors++;
+
+	stats->rx_errors++;
+	return -1;
+}
+
+static int sis190_rx_interrupt(struct net_device *dev,
+			       struct sis190_private *tp, void __iomem *ioaddr)
+{
+	struct net_device_stats *stats = &dev->stats;
+	u32 rx_left, cur_rx = tp->cur_rx;
+	u32 delta, count;
+
+	rx_left = NUM_RX_DESC + tp->dirty_rx - cur_rx;
+	rx_left = sis190_rx_quota(rx_left, (u32) dev->quota);
+
+	for (; rx_left > 0; rx_left--, cur_rx++) {
+		unsigned int entry = cur_rx % NUM_RX_DESC;
+		struct RxDesc *desc = tp->RxDescRing + entry;
+		u32 status;
+
+		if (le32_to_cpu(desc->status) & OWNbit)
+			break;
+
+		status = le32_to_cpu(desc->PSize);
+
+		//netif_info(tp, intr, dev, "Rx PSize = %08x\n", status);
+
+		if (sis190_rx_pkt_err(status, stats) < 0)
+			sis190_give_to_asic(desc, tp->rx_buf_sz);
+		else {
+			struct sk_buff *skb = tp->Rx_skbuff[entry];
+			dma_addr_t addr = le32_to_cpu(desc->addr);
+			int pkt_size = (status & RxSizeMask) - 4;
+			struct pci_dev *pdev = tp->pci_dev;
+
+			if (unlikely(pkt_size > tp->rx_buf_sz)) {
+				netif_info(tp, intr, dev,
+					   "(frag) status = %08x\n", status);
+				stats->rx_dropped++;
+				stats->rx_length_errors++;
+				sis190_give_to_asic(desc, tp->rx_buf_sz);
+				continue;
+			}
+
+
+			if (sis190_try_rx_copy(tp, &skb, pkt_size, addr)) {
+				pci_dma_sync_single_for_device(pdev, addr,
+					tp->rx_buf_sz, PCI_DMA_FROMDEVICE);
+				sis190_give_to_asic(desc, tp->rx_buf_sz);
+			} else {
+				pci_unmap_single(pdev, addr, tp->rx_buf_sz,
+						 PCI_DMA_FROMDEVICE);
+				tp->Rx_skbuff[entry] = NULL;
+				sis190_make_unusable_by_asic(desc);
+			}
+
+			skb_put(skb, pkt_size);
+			skb->protocol = eth_type_trans(skb, dev);
+
+			sis190_rx_skb(skb);
+
+			stats->rx_packets++;
+			stats->rx_bytes += pkt_size;
+			if ((status & BCAST) == MCAST)
+				stats->multicast++;
+		}
+	}
+	count = cur_rx - tp->cur_rx;
+	tp->cur_rx = cur_rx;
+
+	delta = sis190_rx_fill(tp, dev, tp->dirty_rx, tp->cur_rx);
+	if (!delta && count)
+		netif_info(tp, intr, dev, "no Rx buffer allocated\n");
+	tp->dirty_rx += delta;
+
+	if ((tp->dirty_rx + NUM_RX_DESC) == tp->cur_rx)
+		netif_emerg(tp, intr, dev, "Rx buffers exhausted\n");
+
+	return count;
+}
+
+static void sis190_unmap_tx_skb(struct pci_dev *pdev, struct sk_buff *skb,
+				struct TxDesc *desc)
+{
+	unsigned int len;
+
+	len = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len;
+
+	pci_unmap_single(pdev, le32_to_cpu(desc->addr), len, PCI_DMA_TODEVICE);
+
+	memset(desc, 0x00, sizeof(*desc));
+}
+
+static inline int sis190_tx_pkt_err(u32 status, struct net_device_stats *stats)
+{
+#define TxErrMask	(WND | TABRT | FIFO | LINK)
+
+	if (!unlikely(status & TxErrMask))
+		return 0;
+
+	if (status & WND)
+		stats->tx_window_errors++;
+	if (status & TABRT)
+		stats->tx_aborted_errors++;
+	if (status & FIFO)
+		stats->tx_fifo_errors++;
+	if (status & LINK)
+		stats->tx_carrier_errors++;
+
+	stats->tx_errors++;
+
+	return -1;
+}
+
+static void sis190_tx_interrupt(struct net_device *dev,
+				struct sis190_private *tp, void __iomem *ioaddr)
+{
+	struct net_device_stats *stats = &dev->stats;
+	u32 pending, dirty_tx = tp->dirty_tx;
+	/*
+	 * It would not be needed if queueing was allowed to be enabled
+	 * again too early (hint: think preempt and unclocked smp systems).
+	 */
+	unsigned int queue_stopped;
+
+	smp_rmb();
+	pending = tp->cur_tx - dirty_tx;
+	queue_stopped = (pending == NUM_TX_DESC);
+
+	for (; pending; pending--, dirty_tx++) {
+		unsigned int entry = dirty_tx % NUM_TX_DESC;
+		struct TxDesc *txd = tp->TxDescRing + entry;
+		u32 status = le32_to_cpu(txd->status);
+		struct sk_buff *skb;
+
+		if (status & OWNbit)
+			break;
+
+		skb = tp->Tx_skbuff[entry];
+
+		if (likely(sis190_tx_pkt_err(status, stats) == 0)) {
+			stats->tx_packets++;
+			stats->tx_bytes += skb->len;
+			stats->collisions += ((status & ColCountMask) - 1);
+		}
+
+		sis190_unmap_tx_skb(tp->pci_dev, skb, txd);
+		tp->Tx_skbuff[entry] = NULL;
+		dev_kfree_skb_irq(skb);
+	}
+
+	if (tp->dirty_tx != dirty_tx) {
+		tp->dirty_tx = dirty_tx;
+		smp_wmb();
+		if (queue_stopped)
+			netif_wake_queue(dev);
+	}
+}
+
+/*
+ * The interrupt handler does all of the Rx thread work and cleans up after
+ * the Tx thread.
+ */
+static irqreturn_t sis190_interrupt(int irq, void *__dev)
+{
+	struct net_device *dev = __dev;
+	struct sis190_private *tp = netdev_priv(dev);
+	void __iomem *ioaddr = tp->mmio_addr;
+	unsigned int handled = 0;
+	u32 status;
+
+	status = SIS_R32(IntrStatus);
+
+	if ((status == 0xffffffff) || !status)
+		goto out;
+
+	handled = 1;
+
+	if (unlikely(!netif_running(dev))) {
+		sis190_asic_down(ioaddr);
+		goto out;
+	}
+
+	SIS_W32(IntrStatus, status);
+
+//	netif_info(tp, intr, dev, "status = %08x\n", status);
+
+	if (status & LinkChange) {
+		netif_info(tp, intr, dev, "link change\n");
+		del_timer(&tp->timer);
+		schedule_work(&tp->phy_task);
+	}
+
+	if (status & RxQInt)
+		sis190_rx_interrupt(dev, tp, ioaddr);
+
+	if (status & TxQ0Int)
+		sis190_tx_interrupt(dev, tp, ioaddr);
+out:
+	return IRQ_RETVAL(handled);
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void sis190_netpoll(struct net_device *dev)
+{
+	struct sis190_private *tp = netdev_priv(dev);
+	struct pci_dev *pdev = tp->pci_dev;
+
+	disable_irq(pdev->irq);
+	sis190_interrupt(pdev->irq, dev);
+	enable_irq(pdev->irq);
+}
+#endif
+
+static void sis190_free_rx_skb(struct sis190_private *tp,
+			       struct sk_buff **sk_buff, struct RxDesc *desc)
+{
+	struct pci_dev *pdev = tp->pci_dev;
+
+	pci_unmap_single(pdev, le32_to_cpu(desc->addr), tp->rx_buf_sz,
+			 PCI_DMA_FROMDEVICE);
+	dev_kfree_skb(*sk_buff);
+	*sk_buff = NULL;
+	sis190_make_unusable_by_asic(desc);
+}
+
+static void sis190_rx_clear(struct sis190_private *tp)
+{
+	unsigned int i;
+
+	for (i = 0; i < NUM_RX_DESC; i++) {
+		if (!tp->Rx_skbuff[i])
+			continue;
+		sis190_free_rx_skb(tp, tp->Rx_skbuff + i, tp->RxDescRing + i);
+	}
+}
+
+static void sis190_init_ring_indexes(struct sis190_private *tp)
+{
+	tp->dirty_tx = tp->dirty_rx = tp->cur_tx = tp->cur_rx = 0;
+}
+
+static int sis190_init_ring(struct net_device *dev)
+{
+	struct sis190_private *tp = netdev_priv(dev);
+
+	sis190_init_ring_indexes(tp);
+
+	memset(tp->Tx_skbuff, 0x0, NUM_TX_DESC * sizeof(struct sk_buff *));
+	memset(tp->Rx_skbuff, 0x0, NUM_RX_DESC * sizeof(struct sk_buff *));
+
+	if (sis190_rx_fill(tp, dev, 0, NUM_RX_DESC) != NUM_RX_DESC)
+		goto err_rx_clear;
+
+	sis190_mark_as_last_descriptor(tp->RxDescRing + NUM_RX_DESC - 1);
+
+	return 0;
+
+err_rx_clear:
+	sis190_rx_clear(tp);
+	return -ENOMEM;
+}
+
+static void sis190_set_rx_mode(struct net_device *dev)
+{
+	struct sis190_private *tp = netdev_priv(dev);
+	void __iomem *ioaddr = tp->mmio_addr;
+	unsigned long flags;
+	u32 mc_filter[2];	/* Multicast hash filter */
+	u16 rx_mode;
+
+	if (dev->flags & IFF_PROMISC) {
+		rx_mode =
+			AcceptBroadcast | AcceptMulticast | AcceptMyPhys |
+			AcceptAllPhys;
+		mc_filter[1] = mc_filter[0] = 0xffffffff;
+	} else if ((netdev_mc_count(dev) > multicast_filter_limit) ||
+		   (dev->flags & IFF_ALLMULTI)) {
+		/* Too many to filter perfectly -- accept all multicasts. */
+		rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys;
+		mc_filter[1] = mc_filter[0] = 0xffffffff;
+	} else {
+		struct netdev_hw_addr *ha;
+
+		rx_mode = AcceptBroadcast | AcceptMyPhys;
+		mc_filter[1] = mc_filter[0] = 0;
+		netdev_for_each_mc_addr(ha, dev) {
+			int bit_nr =
+				ether_crc(ETH_ALEN, ha->addr) & 0x3f;
+			mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31);
+			rx_mode |= AcceptMulticast;
+		}
+	}
+
+	spin_lock_irqsave(&tp->lock, flags);
+
+	SIS_W16(RxMacControl, rx_mode | 0x2);
+	SIS_W32(RxHashTable, mc_filter[0]);
+	SIS_W32(RxHashTable + 4, mc_filter[1]);
+
+	spin_unlock_irqrestore(&tp->lock, flags);
+}
+
+static void sis190_soft_reset(void __iomem *ioaddr)
+{
+	SIS_W32(IntrControl, 0x8000);
+	SIS_PCI_COMMIT();
+	SIS_W32(IntrControl, 0x0);
+	sis190_asic_down(ioaddr);
+}
+
+static void sis190_hw_start(struct net_device *dev)
+{
+	struct sis190_private *tp = netdev_priv(dev);
+	void __iomem *ioaddr = tp->mmio_addr;
+
+	sis190_soft_reset(ioaddr);
+
+	SIS_W32(TxDescStartAddr, tp->tx_dma);
+	SIS_W32(RxDescStartAddr, tp->rx_dma);
+
+	SIS_W32(IntrStatus, 0xffffffff);
+	SIS_W32(IntrMask, 0x0);
+	SIS_W32(GMIIControl, 0x0);
+	SIS_W32(TxMacControl, 0x60);
+	SIS_W16(RxMacControl, 0x02);
+	SIS_W32(RxHashTable, 0x0);
+	SIS_W32(0x6c, 0x0);
+	SIS_W32(RxWolCtrl, 0x0);
+	SIS_W32(RxWolData, 0x0);
+
+	SIS_PCI_COMMIT();
+
+	sis190_set_rx_mode(dev);
+
+	/* Enable all known interrupts by setting the interrupt mask. */
+	SIS_W32(IntrMask, sis190_intr_mask);
+
+	SIS_W32(TxControl, 0x1a00 | CmdTxEnb);
+	SIS_W32(RxControl, 0x1a1d);
+
+	netif_start_queue(dev);
+}
+
+static void sis190_phy_task(struct work_struct *work)
+{
+	struct sis190_private *tp =
+		container_of(work, struct sis190_private, phy_task);
+	struct net_device *dev = tp->dev;
+	void __iomem *ioaddr = tp->mmio_addr;
+	int phy_id = tp->mii_if.phy_id;
+	u16 val;
+
+	rtnl_lock();
+
+	if (!netif_running(dev))
+		goto out_unlock;
+
+	val = mdio_read(ioaddr, phy_id, MII_BMCR);
+	if (val & BMCR_RESET) {
+		// FIXME: needlessly high ?  -- FR 02/07/2005
+		mod_timer(&tp->timer, jiffies + HZ/10);
+		goto out_unlock;
+	}
+
+	val = mdio_read_latched(ioaddr, phy_id, MII_BMSR);
+	if (!(val & BMSR_ANEGCOMPLETE) && tp->link_status != LNK_AUTONEG) {
+		netif_carrier_off(dev);
+		netif_warn(tp, link, dev, "auto-negotiating...\n");
+		tp->link_status = LNK_AUTONEG;
+	} else if ((val & BMSR_LSTATUS) && tp->link_status != LNK_ON) {
+		/* Rejoice ! */
+		struct {
+			int val;
+			u32 ctl;
+			const char *msg;
+		} reg31[] = {
+			{ LPA_1000FULL, 0x07000c00 | 0x00001000,
+				"1000 Mbps Full Duplex" },
+			{ LPA_1000HALF, 0x07000c00,
+				"1000 Mbps Half Duplex" },
+			{ LPA_100FULL, 0x04000800 | 0x00001000,
+				"100 Mbps Full Duplex" },
+			{ LPA_100HALF, 0x04000800,
+				"100 Mbps Half Duplex" },
+			{ LPA_10FULL, 0x04000400 | 0x00001000,
+				"10 Mbps Full Duplex" },
+			{ LPA_10HALF, 0x04000400,
+				"10 Mbps Half Duplex" },
+			{ 0, 0x04000400, "unknown" }
+		}, *p = NULL;
+		u16 adv, autoexp, gigadv, gigrec;
+
+		val = mdio_read(ioaddr, phy_id, 0x1f);
+		netif_info(tp, link, dev, "mii ext = %04x\n", val);
+
+		val = mdio_read(ioaddr, phy_id, MII_LPA);
+		adv = mdio_read(ioaddr, phy_id, MII_ADVERTISE);
+		autoexp = mdio_read(ioaddr, phy_id, MII_EXPANSION);
+		netif_info(tp, link, dev, "mii lpa=%04x adv=%04x exp=%04x\n",
+			   val, adv, autoexp);
+
+		if (val & LPA_NPAGE && autoexp & EXPANSION_NWAY) {
+			/* check for gigabit speed */
+			gigadv = mdio_read(ioaddr, phy_id, MII_CTRL1000);
+			gigrec = mdio_read(ioaddr, phy_id, MII_STAT1000);
+			val = (gigadv & (gigrec >> 2));
+			if (val & ADVERTISE_1000FULL)
+				p = reg31;
+			else if (val & ADVERTISE_1000HALF)
+				p = reg31 + 1;
+		}
+		if (!p) {
+			val &= adv;
+
+			for (p = reg31; p->val; p++) {
+				if ((val & p->val) == p->val)
+					break;
+			}
+		}
+
+		p->ctl |= SIS_R32(StationControl) & ~0x0f001c00;
+
+		if ((tp->features & F_HAS_RGMII) &&
+		    (tp->features & F_PHY_BCM5461)) {
+			// Set Tx Delay in RGMII mode.
+			mdio_write(ioaddr, phy_id, 0x18, 0xf1c7);
+			udelay(200);
+			mdio_write(ioaddr, phy_id, 0x1c, 0x8c00);
+			p->ctl |= 0x03000000;
+		}
+
+		SIS_W32(StationControl, p->ctl);
+
+		if (tp->features & F_HAS_RGMII) {
+			SIS_W32(RGDelay, 0x0441);
+			SIS_W32(RGDelay, 0x0440);
+		}
+
+		tp->negotiated_lpa = p->val;
+
+		netif_info(tp, link, dev, "link on %s mode\n", p->msg);
+		netif_carrier_on(dev);
+		tp->link_status = LNK_ON;
+	} else if (!(val & BMSR_LSTATUS) && tp->link_status != LNK_AUTONEG)
+		tp->link_status = LNK_OFF;
+	mod_timer(&tp->timer, jiffies + SIS190_PHY_TIMEOUT);
+
+out_unlock:
+	rtnl_unlock();
+}
+
+static void sis190_phy_timer(unsigned long __opaque)
+{
+	struct net_device *dev = (struct net_device *)__opaque;
+	struct sis190_private *tp = netdev_priv(dev);
+
+	if (likely(netif_running(dev)))
+		schedule_work(&tp->phy_task);
+}
+
+static inline void sis190_delete_timer(struct net_device *dev)
+{
+	struct sis190_private *tp = netdev_priv(dev);
+
+	del_timer_sync(&tp->timer);
+}
+
+static inline void sis190_request_timer(struct net_device *dev)
+{
+	struct sis190_private *tp = netdev_priv(dev);
+	struct timer_list *timer = &tp->timer;
+
+	init_timer(timer);
+	timer->expires = jiffies + SIS190_PHY_TIMEOUT;
+	timer->data = (unsigned long)dev;
+	timer->function = sis190_phy_timer;
+	add_timer(timer);
+}
+
+static void sis190_set_rxbufsize(struct sis190_private *tp,
+				 struct net_device *dev)
+{
+	unsigned int mtu = dev->mtu;
+
+	tp->rx_buf_sz = (mtu > RX_BUF_SIZE) ? mtu + ETH_HLEN + 8 : RX_BUF_SIZE;
+	/* RxDesc->size has a licence to kill the lower bits */
+	if (tp->rx_buf_sz & 0x07) {
+		tp->rx_buf_sz += 8;
+		tp->rx_buf_sz &= RX_BUF_MASK;
+	}
+}
+
+static int sis190_open(struct net_device *dev)
+{
+	struct sis190_private *tp = netdev_priv(dev);
+	struct pci_dev *pdev = tp->pci_dev;
+	int rc = -ENOMEM;
+
+	sis190_set_rxbufsize(tp, dev);
+
+	/*
+	 * Rx and Tx descriptors need 256 bytes alignment.
+	 * pci_alloc_consistent() guarantees a stronger alignment.
+	 */
+	tp->TxDescRing = pci_alloc_consistent(pdev, TX_RING_BYTES, &tp->tx_dma);
+	if (!tp->TxDescRing)
+		goto out;
+
+	tp->RxDescRing = pci_alloc_consistent(pdev, RX_RING_BYTES, &tp->rx_dma);
+	if (!tp->RxDescRing)
+		goto err_free_tx_0;
+
+	rc = sis190_init_ring(dev);
+	if (rc < 0)
+		goto err_free_rx_1;
+
+	sis190_request_timer(dev);
+
+	rc = request_irq(dev->irq, sis190_interrupt, IRQF_SHARED, dev->name, dev);
+	if (rc < 0)
+		goto err_release_timer_2;
+
+	sis190_hw_start(dev);
+out:
+	return rc;
+
+err_release_timer_2:
+	sis190_delete_timer(dev);
+	sis190_rx_clear(tp);
+err_free_rx_1:
+	pci_free_consistent(tp->pci_dev, RX_RING_BYTES, tp->RxDescRing,
+		tp->rx_dma);
+err_free_tx_0:
+	pci_free_consistent(tp->pci_dev, TX_RING_BYTES, tp->TxDescRing,
+		tp->tx_dma);
+	goto out;
+}
+
+static void sis190_tx_clear(struct sis190_private *tp)
+{
+	unsigned int i;
+
+	for (i = 0; i < NUM_TX_DESC; i++) {
+		struct sk_buff *skb = tp->Tx_skbuff[i];
+
+		if (!skb)
+			continue;
+
+		sis190_unmap_tx_skb(tp->pci_dev, skb, tp->TxDescRing + i);
+		tp->Tx_skbuff[i] = NULL;
+		dev_kfree_skb(skb);
+
+		tp->dev->stats.tx_dropped++;
+	}
+	tp->cur_tx = tp->dirty_tx = 0;
+}
+
+static void sis190_down(struct net_device *dev)
+{
+	struct sis190_private *tp = netdev_priv(dev);
+	void __iomem *ioaddr = tp->mmio_addr;
+	unsigned int poll_locked = 0;
+
+	sis190_delete_timer(dev);
+
+	netif_stop_queue(dev);
+
+	do {
+		spin_lock_irq(&tp->lock);
+
+		sis190_asic_down(ioaddr);
+
+		spin_unlock_irq(&tp->lock);
+
+		synchronize_irq(dev->irq);
+
+		if (!poll_locked)
+			poll_locked++;
+
+		synchronize_sched();
+
+	} while (SIS_R32(IntrMask));
+
+	sis190_tx_clear(tp);
+	sis190_rx_clear(tp);
+}
+
+static int sis190_close(struct net_device *dev)
+{
+	struct sis190_private *tp = netdev_priv(dev);
+	struct pci_dev *pdev = tp->pci_dev;
+
+	sis190_down(dev);
+
+	free_irq(dev->irq, dev);
+
+	pci_free_consistent(pdev, TX_RING_BYTES, tp->TxDescRing, tp->tx_dma);
+	pci_free_consistent(pdev, RX_RING_BYTES, tp->RxDescRing, tp->rx_dma);
+
+	tp->TxDescRing = NULL;
+	tp->RxDescRing = NULL;
+
+	return 0;
+}
+
+static netdev_tx_t sis190_start_xmit(struct sk_buff *skb,
+				     struct net_device *dev)
+{
+	struct sis190_private *tp = netdev_priv(dev);
+	void __iomem *ioaddr = tp->mmio_addr;
+	u32 len, entry, dirty_tx;
+	struct TxDesc *desc;
+	dma_addr_t mapping;
+
+	if (unlikely(skb->len < ETH_ZLEN)) {
+		if (skb_padto(skb, ETH_ZLEN)) {
+			dev->stats.tx_dropped++;
+			goto out;
+		}
+		len = ETH_ZLEN;
+	} else {
+		len = skb->len;
+	}
+
+	entry = tp->cur_tx % NUM_TX_DESC;
+	desc = tp->TxDescRing + entry;
+
+	if (unlikely(le32_to_cpu(desc->status) & OWNbit)) {
+		netif_stop_queue(dev);
+		netif_err(tp, tx_err, dev,
+			  "BUG! Tx Ring full when queue awake!\n");
+		return NETDEV_TX_BUSY;
+	}
+
+	mapping = pci_map_single(tp->pci_dev, skb->data, len, PCI_DMA_TODEVICE);
+	if (pci_dma_mapping_error(tp->pci_dev, mapping)) {
+		netif_err(tp, tx_err, dev,
+				"PCI mapping failed, dropping packet");
+		return NETDEV_TX_BUSY;
+	}
+
+	tp->Tx_skbuff[entry] = skb;
+
+	desc->PSize = cpu_to_le32(len);
+	desc->addr = cpu_to_le32(mapping);
+
+	desc->size = cpu_to_le32(len);
+	if (entry == (NUM_TX_DESC - 1))
+		desc->size |= cpu_to_le32(RingEnd);
+
+	wmb();
+
+	desc->status = cpu_to_le32(OWNbit | INTbit | DEFbit | CRCbit | PADbit);
+	if (tp->negotiated_lpa & (LPA_1000HALF | LPA_100HALF | LPA_10HALF)) {
+		/* Half Duplex */
+		desc->status |= cpu_to_le32(COLEN | CRSEN | BKFEN);
+		if (tp->negotiated_lpa & (LPA_1000HALF | LPA_1000FULL))
+			desc->status |= cpu_to_le32(EXTEN | BSTEN); /* gigabit HD */
+	}
+
+	tp->cur_tx++;
+
+	smp_wmb();
+
+	SIS_W32(TxControl, 0x1a00 | CmdReset | CmdTxEnb);
+
+	dirty_tx = tp->dirty_tx;
+	if ((tp->cur_tx - NUM_TX_DESC) == dirty_tx) {
+		netif_stop_queue(dev);
+		smp_rmb();
+		if (dirty_tx != tp->dirty_tx)
+			netif_wake_queue(dev);
+	}
+out:
+	return NETDEV_TX_OK;
+}
+
+static void sis190_free_phy(struct list_head *first_phy)
+{
+	struct sis190_phy *cur, *next;
+
+	list_for_each_entry_safe(cur, next, first_phy, list) {
+		kfree(cur);
+	}
+}
+
+/**
+ *	sis190_default_phy - Select default PHY for sis190 mac.
+ *	@dev: the net device to probe for
+ *
+ *	Select first detected PHY with link as default.
+ *	If no one is link on, select PHY whose types is HOME as default.
+ *	If HOME doesn't exist, select LAN.
+ */
+static u16 sis190_default_phy(struct net_device *dev)
+{
+	struct sis190_phy *phy, *phy_home, *phy_default, *phy_lan;
+	struct sis190_private *tp = netdev_priv(dev);
+	struct mii_if_info *mii_if = &tp->mii_if;
+	void __iomem *ioaddr = tp->mmio_addr;
+	u16 status;
+
+	phy_home = phy_default = phy_lan = NULL;
+
+	list_for_each_entry(phy, &tp->first_phy, list) {
+		status = mdio_read_latched(ioaddr, phy->phy_id, MII_BMSR);
+
+		// Link ON & Not select default PHY & not ghost PHY.
+		if ((status & BMSR_LSTATUS) &&
+		    !phy_default &&
+		    (phy->type != UNKNOWN)) {
+			phy_default = phy;
+		} else {
+			status = mdio_read(ioaddr, phy->phy_id, MII_BMCR);
+			mdio_write(ioaddr, phy->phy_id, MII_BMCR,
+				   status | BMCR_ANENABLE | BMCR_ISOLATE);
+			if (phy->type == HOME)
+				phy_home = phy;
+			else if (phy->type == LAN)
+				phy_lan = phy;
+		}
+	}
+
+	if (!phy_default) {
+		if (phy_home)
+			phy_default = phy_home;
+		else if (phy_lan)
+			phy_default = phy_lan;
+		else
+			phy_default = list_first_entry(&tp->first_phy,
+						 struct sis190_phy, list);
+	}
+
+	if (mii_if->phy_id != phy_default->phy_id) {
+		mii_if->phy_id = phy_default->phy_id;
+		if (netif_msg_probe(tp))
+			pr_info("%s: Using transceiver at address %d as default\n",
+				pci_name(tp->pci_dev), mii_if->phy_id);
+	}
+
+	status = mdio_read(ioaddr, mii_if->phy_id, MII_BMCR);
+	status &= (~BMCR_ISOLATE);
+
+	mdio_write(ioaddr, mii_if->phy_id, MII_BMCR, status);
+	status = mdio_read_latched(ioaddr, mii_if->phy_id, MII_BMSR);
+
+	return status;
+}
+
+static void sis190_init_phy(struct net_device *dev, struct sis190_private *tp,
+			    struct sis190_phy *phy, unsigned int phy_id,
+			    u16 mii_status)
+{
+	void __iomem *ioaddr = tp->mmio_addr;
+	struct mii_chip_info *p;
+
+	INIT_LIST_HEAD(&phy->list);
+	phy->status = mii_status;
+	phy->phy_id = phy_id;
+
+	phy->id[0] = mdio_read(ioaddr, phy_id, MII_PHYSID1);
+	phy->id[1] = mdio_read(ioaddr, phy_id, MII_PHYSID2);
+
+	for (p = mii_chip_table; p->type; p++) {
+		if ((p->id[0] == phy->id[0]) &&
+		    (p->id[1] == (phy->id[1] & 0xfff0))) {
+			break;
+		}
+	}
+
+	if (p->id[1]) {
+		phy->type = (p->type == MIX) ?
+			((mii_status & (BMSR_100FULL | BMSR_100HALF)) ?
+				LAN : HOME) : p->type;
+		tp->features |= p->feature;
+		if (netif_msg_probe(tp))
+			pr_info("%s: %s transceiver at address %d\n",
+				pci_name(tp->pci_dev), p->name, phy_id);
+	} else {
+		phy->type = UNKNOWN;
+		if (netif_msg_probe(tp))
+			pr_info("%s: unknown PHY 0x%x:0x%x transceiver at address %d\n",
+				pci_name(tp->pci_dev),
+				phy->id[0], (phy->id[1] & 0xfff0), phy_id);
+	}
+}
+
+static void sis190_mii_probe_88e1111_fixup(struct sis190_private *tp)
+{
+	if (tp->features & F_PHY_88E1111) {
+		void __iomem *ioaddr = tp->mmio_addr;
+		int phy_id = tp->mii_if.phy_id;
+		u16 reg[2][2] = {
+			{ 0x808b, 0x0ce1 },
+			{ 0x808f, 0x0c60 }
+		}, *p;
+
+		p = (tp->features & F_HAS_RGMII) ? reg[0] : reg[1];
+
+		mdio_write(ioaddr, phy_id, 0x1b, p[0]);
+		udelay(200);
+		mdio_write(ioaddr, phy_id, 0x14, p[1]);
+		udelay(200);
+	}
+}
+
+/**
+ *	sis190_mii_probe - Probe MII PHY for sis190
+ *	@dev: the net device to probe for
+ *
+ *	Search for total of 32 possible mii phy addresses.
+ *	Identify and set current phy if found one,
+ *	return error if it failed to found.
+ */
+static int __devinit sis190_mii_probe(struct net_device *dev)
+{
+	struct sis190_private *tp = netdev_priv(dev);
+	struct mii_if_info *mii_if = &tp->mii_if;
+	void __iomem *ioaddr = tp->mmio_addr;
+	int phy_id;
+	int rc = 0;
+
+	INIT_LIST_HEAD(&tp->first_phy);
+
+	for (phy_id = 0; phy_id < PHY_MAX_ADDR; phy_id++) {
+		struct sis190_phy *phy;
+		u16 status;
+
+		status = mdio_read_latched(ioaddr, phy_id, MII_BMSR);
+
+		// Try next mii if the current one is not accessible.
+		if (status == 0xffff || status == 0x0000)
+			continue;
+
+		phy = kmalloc(sizeof(*phy), GFP_KERNEL);
+		if (!phy) {
+			sis190_free_phy(&tp->first_phy);
+			rc = -ENOMEM;
+			goto out;
+		}
+
+		sis190_init_phy(dev, tp, phy, phy_id, status);
+
+		list_add(&tp->first_phy, &phy->list);
+	}
+
+	if (list_empty(&tp->first_phy)) {
+		if (netif_msg_probe(tp))
+			pr_info("%s: No MII transceivers found!\n",
+				pci_name(tp->pci_dev));
+		rc = -EIO;
+		goto out;
+	}
+
+	/* Select default PHY for mac */
+	sis190_default_phy(dev);
+
+	sis190_mii_probe_88e1111_fixup(tp);
+
+	mii_if->dev = dev;
+	mii_if->mdio_read = __mdio_read;
+	mii_if->mdio_write = __mdio_write;
+	mii_if->phy_id_mask = PHY_ID_ANY;
+	mii_if->reg_num_mask = MII_REG_ANY;
+out:
+	return rc;
+}
+
+static void sis190_mii_remove(struct net_device *dev)
+{
+	struct sis190_private *tp = netdev_priv(dev);
+
+	sis190_free_phy(&tp->first_phy);
+}
+
+static void sis190_release_board(struct pci_dev *pdev)
+{
+	struct net_device *dev = pci_get_drvdata(pdev);
+	struct sis190_private *tp = netdev_priv(dev);
+
+	iounmap(tp->mmio_addr);
+	pci_release_regions(pdev);
+	pci_disable_device(pdev);
+	free_netdev(dev);
+}
+
+static struct net_device * __devinit sis190_init_board(struct pci_dev *pdev)
+{
+	struct sis190_private *tp;
+	struct net_device *dev;
+	void __iomem *ioaddr;
+	int rc;
+
+	dev = alloc_etherdev(sizeof(*tp));
+	if (!dev) {
+		if (netif_msg_drv(&debug))
+			pr_err("unable to alloc new ethernet\n");
+		rc = -ENOMEM;
+		goto err_out_0;
+	}
+
+	SET_NETDEV_DEV(dev, &pdev->dev);
+
+	tp = netdev_priv(dev);
+	tp->dev = dev;
+	tp->msg_enable = netif_msg_init(debug.msg_enable, SIS190_MSG_DEFAULT);
+
+	rc = pci_enable_device(pdev);
+	if (rc < 0) {
+		if (netif_msg_probe(tp))
+			pr_err("%s: enable failure\n", pci_name(pdev));
+		goto err_free_dev_1;
+	}
+
+	rc = -ENODEV;
+
+	if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) {
+		if (netif_msg_probe(tp))
+			pr_err("%s: region #0 is no MMIO resource\n",
+			       pci_name(pdev));
+		goto err_pci_disable_2;
+	}
+	if (pci_resource_len(pdev, 0) < SIS190_REGS_SIZE) {
+		if (netif_msg_probe(tp))
+			pr_err("%s: invalid PCI region size(s)\n",
+			       pci_name(pdev));
+		goto err_pci_disable_2;
+	}
+
+	rc = pci_request_regions(pdev, DRV_NAME);
+	if (rc < 0) {
+		if (netif_msg_probe(tp))
+			pr_err("%s: could not request regions\n",
+			       pci_name(pdev));
+		goto err_pci_disable_2;
+	}
+
+	rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+	if (rc < 0) {
+		if (netif_msg_probe(tp))
+			pr_err("%s: DMA configuration failed\n",
+			       pci_name(pdev));
+		goto err_free_res_3;
+	}
+
+	pci_set_master(pdev);
+
+	ioaddr = ioremap(pci_resource_start(pdev, 0), SIS190_REGS_SIZE);
+	if (!ioaddr) {
+		if (netif_msg_probe(tp))
+			pr_err("%s: cannot remap MMIO, aborting\n",
+			       pci_name(pdev));
+		rc = -EIO;
+		goto err_free_res_3;
+	}
+
+	tp->pci_dev = pdev;
+	tp->mmio_addr = ioaddr;
+	tp->link_status = LNK_OFF;
+
+	sis190_irq_mask_and_ack(ioaddr);
+
+	sis190_soft_reset(ioaddr);
+out:
+	return dev;
+
+err_free_res_3:
+	pci_release_regions(pdev);
+err_pci_disable_2:
+	pci_disable_device(pdev);
+err_free_dev_1:
+	free_netdev(dev);
+err_out_0:
+	dev = ERR_PTR(rc);
+	goto out;
+}
+
+static void sis190_tx_timeout(struct net_device *dev)
+{
+	struct sis190_private *tp = netdev_priv(dev);
+	void __iomem *ioaddr = tp->mmio_addr;
+	u8 tmp8;
+
+	/* Disable Tx, if not already */
+	tmp8 = SIS_R8(TxControl);
+	if (tmp8 & CmdTxEnb)
+		SIS_W8(TxControl, tmp8 & ~CmdTxEnb);
+
+	netif_info(tp, tx_err, dev, "Transmit timeout, status %08x %08x\n",
+		   SIS_R32(TxControl), SIS_R32(TxSts));
+
+	/* Disable interrupts by clearing the interrupt mask. */
+	SIS_W32(IntrMask, 0x0000);
+
+	/* Stop a shared interrupt from scavenging while we are. */
+	spin_lock_irq(&tp->lock);
+	sis190_tx_clear(tp);
+	spin_unlock_irq(&tp->lock);
+
+	/* ...and finally, reset everything. */
+	sis190_hw_start(dev);
+
+	netif_wake_queue(dev);
+}
+
+static void sis190_set_rgmii(struct sis190_private *tp, u8 reg)
+{
+	tp->features |= (reg & 0x80) ? F_HAS_RGMII : 0;
+}
+
+static int __devinit sis190_get_mac_addr_from_eeprom(struct pci_dev *pdev,
+						     struct net_device *dev)
+{
+	struct sis190_private *tp = netdev_priv(dev);
+	void __iomem *ioaddr = tp->mmio_addr;
+	u16 sig;
+	int i;
+
+	if (netif_msg_probe(tp))
+		pr_info("%s: Read MAC address from EEPROM\n", pci_name(pdev));
+
+	/* Check to see if there is a sane EEPROM */
+	sig = (u16) sis190_read_eeprom(ioaddr, EEPROMSignature);
+
+	if ((sig == 0xffff) || (sig == 0x0000)) {
+		if (netif_msg_probe(tp))
+			pr_info("%s: Error EEPROM read %x\n",
+				pci_name(pdev), sig);
+		return -EIO;
+	}
+
+	/* Get MAC address from EEPROM */
+	for (i = 0; i < MAC_ADDR_LEN / 2; i++) {
+		u16 w = sis190_read_eeprom(ioaddr, EEPROMMACAddr + i);
+
+		((__le16 *)dev->dev_addr)[i] = cpu_to_le16(w);
+	}
+
+	sis190_set_rgmii(tp, sis190_read_eeprom(ioaddr, EEPROMInfo));
+
+	return 0;
+}
+
+/**
+ *	sis190_get_mac_addr_from_apc - Get MAC address for SiS96x model
+ *	@pdev: PCI device
+ *	@dev:  network device to get address for
+ *
+ *	SiS96x model, use APC CMOS RAM to store MAC address.
+ *	APC CMOS RAM is accessed through ISA bridge.
+ *	MAC address is read into @net_dev->dev_addr.
+ */
+static int __devinit sis190_get_mac_addr_from_apc(struct pci_dev *pdev,
+						  struct net_device *dev)
+{
+	static const u16 __devinitdata ids[] = { 0x0965, 0x0966, 0x0968 };
+	struct sis190_private *tp = netdev_priv(dev);
+	struct pci_dev *isa_bridge;
+	u8 reg, tmp8;
+	unsigned int i;
+
+	if (netif_msg_probe(tp))
+		pr_info("%s: Read MAC address from APC\n", pci_name(pdev));
+
+	for (i = 0; i < ARRAY_SIZE(ids); i++) {
+		isa_bridge = pci_get_device(PCI_VENDOR_ID_SI, ids[i], NULL);
+		if (isa_bridge)
+			break;
+	}
+
+	if (!isa_bridge) {
+		if (netif_msg_probe(tp))
+			pr_info("%s: Can not find ISA bridge\n",
+				pci_name(pdev));
+		return -EIO;
+	}
+
+	/* Enable port 78h & 79h to access APC Registers. */
+	pci_read_config_byte(isa_bridge, 0x48, &tmp8);
+	reg = (tmp8 & ~0x02);
+	pci_write_config_byte(isa_bridge, 0x48, reg);
+	udelay(50);
+	pci_read_config_byte(isa_bridge, 0x48, &reg);
+
+        for (i = 0; i < MAC_ADDR_LEN; i++) {
+                outb(0x9 + i, 0x78);
+                dev->dev_addr[i] = inb(0x79);
+        }
+
+	outb(0x12, 0x78);
+	reg = inb(0x79);
+
+	sis190_set_rgmii(tp, reg);
+
+	/* Restore the value to ISA Bridge */
+	pci_write_config_byte(isa_bridge, 0x48, tmp8);
+	pci_dev_put(isa_bridge);
+
+	return 0;
+}
+
+/**
+ *      sis190_init_rxfilter - Initialize the Rx filter
+ *      @dev: network device to initialize
+ *
+ *      Set receive filter address to our MAC address
+ *      and enable packet filtering.
+ */
+static inline void sis190_init_rxfilter(struct net_device *dev)
+{
+	struct sis190_private *tp = netdev_priv(dev);
+	void __iomem *ioaddr = tp->mmio_addr;
+	u16 ctl;
+	int i;
+
+	ctl = SIS_R16(RxMacControl);
+	/*
+	 * Disable packet filtering before setting filter.
+	 * Note: SiS's driver writes 32 bits but RxMacControl is 16 bits
+	 * only and followed by RxMacAddr (6 bytes). Strange. -- FR
+	 */
+	SIS_W16(RxMacControl, ctl & ~0x0f00);
+
+	for (i = 0; i < MAC_ADDR_LEN; i++)
+		SIS_W8(RxMacAddr + i, dev->dev_addr[i]);
+
+	SIS_W16(RxMacControl, ctl);
+	SIS_PCI_COMMIT();
+}
+
+static int __devinit sis190_get_mac_addr(struct pci_dev *pdev,
+					 struct net_device *dev)
+{
+	int rc;
+
+	rc = sis190_get_mac_addr_from_eeprom(pdev, dev);
+	if (rc < 0) {
+		u8 reg;
+
+		pci_read_config_byte(pdev, 0x73, &reg);
+
+		if (reg & 0x00000001)
+			rc = sis190_get_mac_addr_from_apc(pdev, dev);
+	}
+	return rc;
+}
+
+static void sis190_set_speed_auto(struct net_device *dev)
+{
+	struct sis190_private *tp = netdev_priv(dev);
+	void __iomem *ioaddr = tp->mmio_addr;
+	int phy_id = tp->mii_if.phy_id;
+	int val;
+
+	netif_info(tp, link, dev, "Enabling Auto-negotiation\n");
+
+	val = mdio_read(ioaddr, phy_id, MII_ADVERTISE);
+
+	// Enable 10/100 Full/Half Mode, leave MII_ADVERTISE bit4:0
+	// unchanged.
+	mdio_write(ioaddr, phy_id, MII_ADVERTISE, (val & ADVERTISE_SLCT) |
+		   ADVERTISE_100FULL | ADVERTISE_10FULL |
+		   ADVERTISE_100HALF | ADVERTISE_10HALF);
+
+	// Enable 1000 Full Mode.
+	mdio_write(ioaddr, phy_id, MII_CTRL1000, ADVERTISE_1000FULL);
+
+	// Enable auto-negotiation and restart auto-negotiation.
+	mdio_write(ioaddr, phy_id, MII_BMCR,
+		   BMCR_ANENABLE | BMCR_ANRESTART | BMCR_RESET);
+}
+
+static int sis190_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+	struct sis190_private *tp = netdev_priv(dev);
+
+	return mii_ethtool_gset(&tp->mii_if, cmd);
+}
+
+static int sis190_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+	struct sis190_private *tp = netdev_priv(dev);
+
+	return mii_ethtool_sset(&tp->mii_if, cmd);
+}
+
+static void sis190_get_drvinfo(struct net_device *dev,
+			       struct ethtool_drvinfo *info)
+{
+	struct sis190_private *tp = netdev_priv(dev);
+
+	strcpy(info->driver, DRV_NAME);
+	strcpy(info->version, DRV_VERSION);
+	strcpy(info->bus_info, pci_name(tp->pci_dev));
+}
+
+static int sis190_get_regs_len(struct net_device *dev)
+{
+	return SIS190_REGS_SIZE;
+}
+
+static void sis190_get_regs(struct net_device *dev, struct ethtool_regs *regs,
+			    void *p)
+{
+	struct sis190_private *tp = netdev_priv(dev);
+	unsigned long flags;
+
+	if (regs->len > SIS190_REGS_SIZE)
+		regs->len = SIS190_REGS_SIZE;
+
+	spin_lock_irqsave(&tp->lock, flags);
+	memcpy_fromio(p, tp->mmio_addr, regs->len);
+	spin_unlock_irqrestore(&tp->lock, flags);
+}
+
+static int sis190_nway_reset(struct net_device *dev)
+{
+	struct sis190_private *tp = netdev_priv(dev);
+
+	return mii_nway_restart(&tp->mii_if);
+}
+
+static u32 sis190_get_msglevel(struct net_device *dev)
+{
+	struct sis190_private *tp = netdev_priv(dev);
+
+	return tp->msg_enable;
+}
+
+static void sis190_set_msglevel(struct net_device *dev, u32 value)
+{
+	struct sis190_private *tp = netdev_priv(dev);
+
+	tp->msg_enable = value;
+}
+
+static const struct ethtool_ops sis190_ethtool_ops = {
+	.get_settings	= sis190_get_settings,
+	.set_settings	= sis190_set_settings,
+	.get_drvinfo	= sis190_get_drvinfo,
+	.get_regs_len	= sis190_get_regs_len,
+	.get_regs	= sis190_get_regs,
+	.get_link	= ethtool_op_get_link,
+	.get_msglevel	= sis190_get_msglevel,
+	.set_msglevel	= sis190_set_msglevel,
+	.nway_reset	= sis190_nway_reset,
+};
+
+static int sis190_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
+{
+	struct sis190_private *tp = netdev_priv(dev);
+
+	return !netif_running(dev) ? -EINVAL :
+		generic_mii_ioctl(&tp->mii_if, if_mii(ifr), cmd, NULL);
+}
+
+static int sis190_mac_addr(struct net_device  *dev, void *p)
+{
+	int rc;
+
+	rc = eth_mac_addr(dev, p);
+	if (!rc)
+		sis190_init_rxfilter(dev);
+	return rc;
+}
+
+static const struct net_device_ops sis190_netdev_ops = {
+	.ndo_open		= sis190_open,
+	.ndo_stop		= sis190_close,
+	.ndo_do_ioctl		= sis190_ioctl,
+	.ndo_start_xmit		= sis190_start_xmit,
+	.ndo_tx_timeout		= sis190_tx_timeout,
+	.ndo_set_multicast_list = sis190_set_rx_mode,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_set_mac_address	= sis190_mac_addr,
+	.ndo_validate_addr	= eth_validate_addr,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	.ndo_poll_controller	 = sis190_netpoll,
+#endif
+};
+
+static int __devinit sis190_init_one(struct pci_dev *pdev,
+				     const struct pci_device_id *ent)
+{
+	static int printed_version = 0;
+	struct sis190_private *tp;
+	struct net_device *dev;
+	void __iomem *ioaddr;
+	int rc;
+
+	if (!printed_version) {
+		if (netif_msg_drv(&debug))
+			pr_info(SIS190_DRIVER_NAME " loaded\n");
+		printed_version = 1;
+	}
+
+	dev = sis190_init_board(pdev);
+	if (IS_ERR(dev)) {
+		rc = PTR_ERR(dev);
+		goto out;
+	}
+
+	pci_set_drvdata(pdev, dev);
+
+	tp = netdev_priv(dev);
+	ioaddr = tp->mmio_addr;
+
+	rc = sis190_get_mac_addr(pdev, dev);
+	if (rc < 0)
+		goto err_release_board;
+
+	sis190_init_rxfilter(dev);
+
+	INIT_WORK(&tp->phy_task, sis190_phy_task);
+
+	dev->netdev_ops = &sis190_netdev_ops;
+
+	SET_ETHTOOL_OPS(dev, &sis190_ethtool_ops);
+	dev->irq = pdev->irq;
+	dev->base_addr = (unsigned long) 0xdead;
+	dev->watchdog_timeo = SIS190_TX_TIMEOUT;
+
+	spin_lock_init(&tp->lock);
+
+	rc = sis190_mii_probe(dev);
+	if (rc < 0)
+		goto err_release_board;
+
+	rc = register_netdev(dev);
+	if (rc < 0)
+		goto err_remove_mii;
+
+	if (netif_msg_probe(tp)) {
+		netdev_info(dev, "%s: %s at %p (IRQ: %d), %pM\n",
+			    pci_name(pdev),
+			    sis_chip_info[ent->driver_data].name,
+			    ioaddr, dev->irq, dev->dev_addr);
+		netdev_info(dev, "%s mode.\n",
+			    (tp->features & F_HAS_RGMII) ? "RGMII" : "GMII");
+	}
+
+	netif_carrier_off(dev);
+
+	sis190_set_speed_auto(dev);
+out:
+	return rc;
+
+err_remove_mii:
+	sis190_mii_remove(dev);
+err_release_board:
+	sis190_release_board(pdev);
+	goto out;
+}
+
+static void __devexit sis190_remove_one(struct pci_dev *pdev)
+{
+	struct net_device *dev = pci_get_drvdata(pdev);
+	struct sis190_private *tp = netdev_priv(dev);
+
+	sis190_mii_remove(dev);
+	cancel_work_sync(&tp->phy_task);
+	unregister_netdev(dev);
+	sis190_release_board(pdev);
+	pci_set_drvdata(pdev, NULL);
+}
+
+static struct pci_driver sis190_pci_driver = {
+	.name		= DRV_NAME,
+	.id_table	= sis190_pci_tbl,
+	.probe		= sis190_init_one,
+	.remove		= __devexit_p(sis190_remove_one),
+};
+
+static int __init sis190_init_module(void)
+{
+	return pci_register_driver(&sis190_pci_driver);
+}
+
+static void __exit sis190_cleanup_module(void)
+{
+	pci_unregister_driver(&sis190_pci_driver);
+}
+
+module_init(sis190_init_module);
+module_exit(sis190_cleanup_module);
diff --git a/drivers/net/ethernet/sis/sis900.c b/drivers/net/ethernet/sis/sis900.c
new file mode 100644
index 000000000000..658a1928fe79
--- /dev/null
+++ b/drivers/net/ethernet/sis/sis900.c
@@ -0,0 +1,2494 @@
+/* sis900.c: A SiS 900/7016 PCI Fast Ethernet driver for Linux.
+   Copyright 1999 Silicon Integrated System Corporation
+   Revision:	1.08.10 Apr. 2 2006
+
+   Modified from the driver which is originally written by Donald Becker.
+
+   This software may be used and distributed according to the terms
+   of the GNU General Public License (GPL), incorporated herein by reference.
+   Drivers based on this skeleton fall under the GPL and must retain
+   the authorship (implicit copyright) notice.
+
+   References:
+   SiS 7016 Fast Ethernet PCI Bus 10/100 Mbps LAN Controller with OnNow Support,
+   preliminary Rev. 1.0 Jan. 14, 1998
+   SiS 900 Fast Ethernet PCI Bus 10/100 Mbps LAN Single Chip with OnNow Support,
+   preliminary Rev. 1.0 Nov. 10, 1998
+   SiS 7014 Single Chip 100BASE-TX/10BASE-T Physical Layer Solution,
+   preliminary Rev. 1.0 Jan. 18, 1998
+
+   Rev 1.08.10 Apr.  2 2006 Daniele Venzano add vlan (jumbo packets) support
+   Rev 1.08.09 Sep. 19 2005 Daniele Venzano add Wake on LAN support
+   Rev 1.08.08 Jan. 22 2005 Daniele Venzano use netif_msg for debugging messages
+   Rev 1.08.07 Nov.  2 2003 Daniele Venzano <venza@brownhat.org> add suspend/resume support
+   Rev 1.08.06 Sep. 24 2002 Mufasa Yang bug fix for Tx timeout & add SiS963 support
+   Rev 1.08.05 Jun.  6 2002 Mufasa Yang bug fix for read_eeprom & Tx descriptor over-boundary
+   Rev 1.08.04 Apr. 25 2002 Mufasa Yang <mufasa@sis.com.tw> added SiS962 support
+   Rev 1.08.03 Feb.  1 2002 Matt Domsch <Matt_Domsch@dell.com> update to use library crc32 function
+   Rev 1.08.02 Nov. 30 2001 Hui-Fen Hsu workaround for EDB & bug fix for dhcp problem
+   Rev 1.08.01 Aug. 25 2001 Hui-Fen Hsu update for 630ET & workaround for ICS1893 PHY
+   Rev 1.08.00 Jun. 11 2001 Hui-Fen Hsu workaround for RTL8201 PHY and some bug fix
+   Rev 1.07.11 Apr.  2 2001 Hui-Fen Hsu updates PCI drivers to use the new pci_set_dma_mask for kernel 2.4.3
+   Rev 1.07.10 Mar.  1 2001 Hui-Fen Hsu <hfhsu@sis.com.tw> some bug fix & 635M/B support
+   Rev 1.07.09 Feb.  9 2001 Dave Jones <davej@suse.de> PCI enable cleanup
+   Rev 1.07.08 Jan.  8 2001 Lei-Chun Chang added RTL8201 PHY support
+   Rev 1.07.07 Nov. 29 2000 Lei-Chun Chang added kernel-doc extractable documentation and 630 workaround fix
+   Rev 1.07.06 Nov.  7 2000 Jeff Garzik <jgarzik@pobox.com> some bug fix and cleaning
+   Rev 1.07.05 Nov.  6 2000 metapirat<metapirat@gmx.de> contribute media type select by ifconfig
+   Rev 1.07.04 Sep.  6 2000 Lei-Chun Chang added ICS1893 PHY support
+   Rev 1.07.03 Aug. 24 2000 Lei-Chun Chang (lcchang@sis.com.tw) modified 630E equalizer workaround rule
+   Rev 1.07.01 Aug. 08 2000 Ollie Lho minor update for SiS 630E and SiS 630E A1
+   Rev 1.07    Mar. 07 2000 Ollie Lho bug fix in Rx buffer ring
+   Rev 1.06.04 Feb. 11 2000 Jeff Garzik <jgarzik@pobox.com> softnet and init for kernel 2.4
+   Rev 1.06.03 Dec. 23 1999 Ollie Lho Third release
+   Rev 1.06.02 Nov. 23 1999 Ollie Lho bug in mac probing fixed
+   Rev 1.06.01 Nov. 16 1999 Ollie Lho CRC calculation provide by Joseph Zbiciak (im14u2c@primenet.com)
+   Rev 1.06 Nov. 4 1999 Ollie Lho (ollie@sis.com.tw) Second release
+   Rev 1.05.05 Oct. 29 1999 Ollie Lho (ollie@sis.com.tw) Single buffer Tx/Rx
+   Chin-Shan Li (lcs@sis.com.tw) Added AMD Am79c901 HomePNA PHY support
+   Rev 1.05 Aug. 7 1999 Jim Huang (cmhuang@sis.com.tw) Initial release
+*/
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/netdevice.h>
+#include <linux/init.h>
+#include <linux/mii.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/delay.h>
+#include <linux/ethtool.h>
+#include <linux/crc32.h>
+#include <linux/bitops.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/processor.h>      /* Processor type for cache alignment. */
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>	/* User space memory access functions */
+
+#include "sis900.h"
+
+#define SIS900_MODULE_NAME "sis900"
+#define SIS900_DRV_VERSION "v1.08.10 Apr. 2 2006"
+
+static const char version[] __devinitconst =
+	KERN_INFO "sis900.c: " SIS900_DRV_VERSION "\n";
+
+static int max_interrupt_work = 40;
+static int multicast_filter_limit = 128;
+
+static int sis900_debug = -1; /* Use SIS900_DEF_MSG as value */
+
+#define SIS900_DEF_MSG \
+	(NETIF_MSG_DRV		| \
+	 NETIF_MSG_LINK		| \
+	 NETIF_MSG_RX_ERR	| \
+	 NETIF_MSG_TX_ERR)
+
+/* Time in jiffies before concluding the transmitter is hung. */
+#define TX_TIMEOUT  (4*HZ)
+
+enum {
+	SIS_900 = 0,
+	SIS_7016
+};
+static const char * card_names[] = {
+	"SiS 900 PCI Fast Ethernet",
+	"SiS 7016 PCI Fast Ethernet"
+};
+static DEFINE_PCI_DEVICE_TABLE(sis900_pci_tbl) = {
+	{PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_900,
+	 PCI_ANY_ID, PCI_ANY_ID, 0, 0, SIS_900},
+	{PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_7016,
+	 PCI_ANY_ID, PCI_ANY_ID, 0, 0, SIS_7016},
+	{0,}
+};
+MODULE_DEVICE_TABLE (pci, sis900_pci_tbl);
+
+static void sis900_read_mode(struct net_device *net_dev, int *speed, int *duplex);
+
+static const struct mii_chip_info {
+	const char * name;
+	u16 phy_id0;
+	u16 phy_id1;
+	u8  phy_types;
+#define	HOME 	0x0001
+#define LAN	0x0002
+#define MIX	0x0003
+#define UNKNOWN	0x0
+} mii_chip_table[] = {
+	{ "SiS 900 Internal MII PHY", 		0x001d, 0x8000, LAN },
+	{ "SiS 7014 Physical Layer Solution", 	0x0016, 0xf830, LAN },
+	{ "SiS 900 on Foxconn 661 7MI",         0x0143, 0xBC70, LAN },
+	{ "Altimata AC101LF PHY",               0x0022, 0x5520, LAN },
+	{ "ADM 7001 LAN PHY",			0x002e, 0xcc60, LAN },
+	{ "AMD 79C901 10BASE-T PHY",  		0x0000, 0x6B70, LAN },
+	{ "AMD 79C901 HomePNA PHY",		0x0000, 0x6B90, HOME},
+	{ "ICS LAN PHY",			0x0015, 0xF440, LAN },
+	{ "ICS LAN PHY",			0x0143, 0xBC70, LAN },
+	{ "NS 83851 PHY",			0x2000, 0x5C20, MIX },
+	{ "NS 83847 PHY",                       0x2000, 0x5C30, MIX },
+	{ "Realtek RTL8201 PHY",		0x0000, 0x8200, LAN },
+	{ "VIA 6103 PHY",			0x0101, 0x8f20, LAN },
+	{NULL,},
+};
+
+struct mii_phy {
+	struct mii_phy * next;
+	int phy_addr;
+	u16 phy_id0;
+	u16 phy_id1;
+	u16 status;
+	u8  phy_types;
+};
+
+typedef struct _BufferDesc {
+	u32 link;
+	u32 cmdsts;
+	u32 bufptr;
+} BufferDesc;
+
+struct sis900_private {
+	struct pci_dev * pci_dev;
+
+	spinlock_t lock;
+
+	struct mii_phy * mii;
+	struct mii_phy * first_mii; /* record the first mii structure */
+	unsigned int cur_phy;
+	struct mii_if_info mii_info;
+
+	struct timer_list timer; /* Link status detection timer. */
+	u8 autong_complete; /* 1: auto-negotiate complete  */
+
+	u32 msg_enable;
+
+	unsigned int cur_rx, dirty_rx; /* producer/comsumer pointers for Tx/Rx ring */
+	unsigned int cur_tx, dirty_tx;
+
+	/* The saved address of a sent/receive-in-place packet buffer */
+	struct sk_buff *tx_skbuff[NUM_TX_DESC];
+	struct sk_buff *rx_skbuff[NUM_RX_DESC];
+	BufferDesc *tx_ring;
+	BufferDesc *rx_ring;
+
+	dma_addr_t tx_ring_dma;
+	dma_addr_t rx_ring_dma;
+
+	unsigned int tx_full; /* The Tx queue is full. */
+	u8 host_bridge_rev;
+	u8 chipset_rev;
+};
+
+MODULE_AUTHOR("Jim Huang <cmhuang@sis.com.tw>, Ollie Lho <ollie@sis.com.tw>");
+MODULE_DESCRIPTION("SiS 900 PCI Fast Ethernet driver");
+MODULE_LICENSE("GPL");
+
+module_param(multicast_filter_limit, int, 0444);
+module_param(max_interrupt_work, int, 0444);
+module_param(sis900_debug, int, 0444);
+MODULE_PARM_DESC(multicast_filter_limit, "SiS 900/7016 maximum number of filtered multicast addresses");
+MODULE_PARM_DESC(max_interrupt_work, "SiS 900/7016 maximum events handled per interrupt");
+MODULE_PARM_DESC(sis900_debug, "SiS 900/7016 bitmapped debugging message level");
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void sis900_poll(struct net_device *dev);
+#endif
+static int sis900_open(struct net_device *net_dev);
+static int sis900_mii_probe (struct net_device * net_dev);
+static void sis900_init_rxfilter (struct net_device * net_dev);
+static u16 read_eeprom(long ioaddr, int location);
+static int mdio_read(struct net_device *net_dev, int phy_id, int location);
+static void mdio_write(struct net_device *net_dev, int phy_id, int location, int val);
+static void sis900_timer(unsigned long data);
+static void sis900_check_mode (struct net_device *net_dev, struct mii_phy *mii_phy);
+static void sis900_tx_timeout(struct net_device *net_dev);
+static void sis900_init_tx_ring(struct net_device *net_dev);
+static void sis900_init_rx_ring(struct net_device *net_dev);
+static netdev_tx_t sis900_start_xmit(struct sk_buff *skb,
+				     struct net_device *net_dev);
+static int sis900_rx(struct net_device *net_dev);
+static void sis900_finish_xmit (struct net_device *net_dev);
+static irqreturn_t sis900_interrupt(int irq, void *dev_instance);
+static int sis900_close(struct net_device *net_dev);
+static int mii_ioctl(struct net_device *net_dev, struct ifreq *rq, int cmd);
+static u16 sis900_mcast_bitnr(u8 *addr, u8 revision);
+static void set_rx_mode(struct net_device *net_dev);
+static void sis900_reset(struct net_device *net_dev);
+static void sis630_set_eq(struct net_device *net_dev, u8 revision);
+static int sis900_set_config(struct net_device *dev, struct ifmap *map);
+static u16 sis900_default_phy(struct net_device * net_dev);
+static void sis900_set_capability( struct net_device *net_dev ,struct mii_phy *phy);
+static u16 sis900_reset_phy(struct net_device *net_dev, int phy_addr);
+static void sis900_auto_negotiate(struct net_device *net_dev, int phy_addr);
+static void sis900_set_mode (long ioaddr, int speed, int duplex);
+static const struct ethtool_ops sis900_ethtool_ops;
+
+/**
+ *	sis900_get_mac_addr - Get MAC address for stand alone SiS900 model
+ *	@pci_dev: the sis900 pci device
+ *	@net_dev: the net device to get address for
+ *
+ *	Older SiS900 and friends, use EEPROM to store MAC address.
+ *	MAC address is read from read_eeprom() into @net_dev->dev_addr and
+ *	@net_dev->perm_addr.
+ */
+
+static int __devinit sis900_get_mac_addr(struct pci_dev * pci_dev, struct net_device *net_dev)
+{
+	long ioaddr = pci_resource_start(pci_dev, 0);
+	u16 signature;
+	int i;
+
+	/* check to see if we have sane EEPROM */
+	signature = (u16) read_eeprom(ioaddr, EEPROMSignature);
+	if (signature == 0xffff || signature == 0x0000) {
+		printk (KERN_WARNING "%s: Error EERPOM read %x\n",
+			pci_name(pci_dev), signature);
+		return 0;
+	}
+
+	/* get MAC address from EEPROM */
+	for (i = 0; i < 3; i++)
+	        ((u16 *)(net_dev->dev_addr))[i] = read_eeprom(ioaddr, i+EEPROMMACAddr);
+
+	/* Store MAC Address in perm_addr */
+	memcpy(net_dev->perm_addr, net_dev->dev_addr, ETH_ALEN);
+
+	return 1;
+}
+
+/**
+ *	sis630e_get_mac_addr - Get MAC address for SiS630E model
+ *	@pci_dev: the sis900 pci device
+ *	@net_dev: the net device to get address for
+ *
+ *	SiS630E model, use APC CMOS RAM to store MAC address.
+ *	APC CMOS RAM is accessed through ISA bridge.
+ *	MAC address is read into @net_dev->dev_addr and
+ *	@net_dev->perm_addr.
+ */
+
+static int __devinit sis630e_get_mac_addr(struct pci_dev * pci_dev,
+					struct net_device *net_dev)
+{
+	struct pci_dev *isa_bridge = NULL;
+	u8 reg;
+	int i;
+
+	isa_bridge = pci_get_device(PCI_VENDOR_ID_SI, 0x0008, isa_bridge);
+	if (!isa_bridge)
+		isa_bridge = pci_get_device(PCI_VENDOR_ID_SI, 0x0018, isa_bridge);
+	if (!isa_bridge) {
+		printk(KERN_WARNING "%s: Can not find ISA bridge\n",
+		       pci_name(pci_dev));
+		return 0;
+	}
+	pci_read_config_byte(isa_bridge, 0x48, &reg);
+	pci_write_config_byte(isa_bridge, 0x48, reg | 0x40);
+
+	for (i = 0; i < 6; i++) {
+		outb(0x09 + i, 0x70);
+		((u8 *)(net_dev->dev_addr))[i] = inb(0x71);
+	}
+
+	/* Store MAC Address in perm_addr */
+	memcpy(net_dev->perm_addr, net_dev->dev_addr, ETH_ALEN);
+
+	pci_write_config_byte(isa_bridge, 0x48, reg & ~0x40);
+	pci_dev_put(isa_bridge);
+
+	return 1;
+}
+
+
+/**
+ *	sis635_get_mac_addr - Get MAC address for SIS635 model
+ *	@pci_dev: the sis900 pci device
+ *	@net_dev: the net device to get address for
+ *
+ *	SiS635 model, set MAC Reload Bit to load Mac address from APC
+ *	to rfdr. rfdr is accessed through rfcr. MAC address is read into
+ *	@net_dev->dev_addr and @net_dev->perm_addr.
+ */
+
+static int __devinit sis635_get_mac_addr(struct pci_dev * pci_dev,
+					struct net_device *net_dev)
+{
+	long ioaddr = net_dev->base_addr;
+	u32 rfcrSave;
+	u32 i;
+
+	rfcrSave = inl(rfcr + ioaddr);
+
+	outl(rfcrSave | RELOAD, ioaddr + cr);
+	outl(0, ioaddr + cr);
+
+	/* disable packet filtering before setting filter */
+	outl(rfcrSave & ~RFEN, rfcr + ioaddr);
+
+	/* load MAC addr to filter data register */
+	for (i = 0 ; i < 3 ; i++) {
+		outl((i << RFADDR_shift), ioaddr + rfcr);
+		*( ((u16 *)net_dev->dev_addr) + i) = inw(ioaddr + rfdr);
+	}
+
+	/* Store MAC Address in perm_addr */
+	memcpy(net_dev->perm_addr, net_dev->dev_addr, ETH_ALEN);
+
+	/* enable packet filtering */
+	outl(rfcrSave | RFEN, rfcr + ioaddr);
+
+	return 1;
+}
+
+/**
+ *	sis96x_get_mac_addr - Get MAC address for SiS962 or SiS963 model
+ *	@pci_dev: the sis900 pci device
+ *	@net_dev: the net device to get address for
+ *
+ *	SiS962 or SiS963 model, use EEPROM to store MAC address. And EEPROM
+ *	is shared by
+ *	LAN and 1394. When access EEPROM, send EEREQ signal to hardware first
+ *	and wait for EEGNT. If EEGNT is ON, EEPROM is permitted to be access
+ *	by LAN, otherwise is not. After MAC address is read from EEPROM, send
+ *	EEDONE signal to refuse EEPROM access by LAN.
+ *	The EEPROM map of SiS962 or SiS963 is different to SiS900.
+ *	The signature field in SiS962 or SiS963 spec is meaningless.
+ *	MAC address is read into @net_dev->dev_addr and @net_dev->perm_addr.
+ */
+
+static int __devinit sis96x_get_mac_addr(struct pci_dev * pci_dev,
+					struct net_device *net_dev)
+{
+	long ioaddr = net_dev->base_addr;
+	long ee_addr = ioaddr + mear;
+	u32 waittime = 0;
+	int i;
+
+	outl(EEREQ, ee_addr);
+	while(waittime < 2000) {
+		if(inl(ee_addr) & EEGNT) {
+
+			/* get MAC address from EEPROM */
+			for (i = 0; i < 3; i++)
+			        ((u16 *)(net_dev->dev_addr))[i] = read_eeprom(ioaddr, i+EEPROMMACAddr);
+
+			/* Store MAC Address in perm_addr */
+			memcpy(net_dev->perm_addr, net_dev->dev_addr, ETH_ALEN);
+
+			outl(EEDONE, ee_addr);
+			return 1;
+		} else {
+			udelay(1);
+			waittime ++;
+		}
+	}
+	outl(EEDONE, ee_addr);
+	return 0;
+}
+
+static const struct net_device_ops sis900_netdev_ops = {
+	.ndo_open		 = sis900_open,
+	.ndo_stop		= sis900_close,
+	.ndo_start_xmit		= sis900_start_xmit,
+	.ndo_set_config		= sis900_set_config,
+	.ndo_set_multicast_list	= set_rx_mode,
+	.ndo_change_mtu		= eth_change_mtu,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_mac_address 	= eth_mac_addr,
+	.ndo_do_ioctl		= mii_ioctl,
+	.ndo_tx_timeout		= sis900_tx_timeout,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+        .ndo_poll_controller	= sis900_poll,
+#endif
+};
+
+/**
+ *	sis900_probe - Probe for sis900 device
+ *	@pci_dev: the sis900 pci device
+ *	@pci_id: the pci device ID
+ *
+ *	Check and probe sis900 net device for @pci_dev.
+ *	Get mac address according to the chip revision,
+ *	and assign SiS900-specific entries in the device structure.
+ *	ie: sis900_open(), sis900_start_xmit(), sis900_close(), etc.
+ */
+
+static int __devinit sis900_probe(struct pci_dev *pci_dev,
+				const struct pci_device_id *pci_id)
+{
+	struct sis900_private *sis_priv;
+	struct net_device *net_dev;
+	struct pci_dev *dev;
+	dma_addr_t ring_dma;
+	void *ring_space;
+	long ioaddr;
+	int i, ret;
+	const char *card_name = card_names[pci_id->driver_data];
+	const char *dev_name = pci_name(pci_dev);
+
+/* when built into the kernel, we only print version if device is found */
+#ifndef MODULE
+	static int printed_version;
+	if (!printed_version++)
+		printk(version);
+#endif
+
+	/* setup various bits in PCI command register */
+	ret = pci_enable_device(pci_dev);
+	if(ret) return ret;
+
+	i = pci_set_dma_mask(pci_dev, DMA_BIT_MASK(32));
+	if(i){
+		printk(KERN_ERR "sis900.c: architecture does not support "
+			"32bit PCI busmaster DMA\n");
+		return i;
+	}
+
+	pci_set_master(pci_dev);
+
+	net_dev = alloc_etherdev(sizeof(struct sis900_private));
+	if (!net_dev)
+		return -ENOMEM;
+	SET_NETDEV_DEV(net_dev, &pci_dev->dev);
+
+	/* We do a request_region() to register /proc/ioports info. */
+	ioaddr = pci_resource_start(pci_dev, 0);
+	ret = pci_request_regions(pci_dev, "sis900");
+	if (ret)
+		goto err_out;
+
+	sis_priv = netdev_priv(net_dev);
+	net_dev->base_addr = ioaddr;
+	net_dev->irq = pci_dev->irq;
+	sis_priv->pci_dev = pci_dev;
+	spin_lock_init(&sis_priv->lock);
+
+	pci_set_drvdata(pci_dev, net_dev);
+
+	ring_space = pci_alloc_consistent(pci_dev, TX_TOTAL_SIZE, &ring_dma);
+	if (!ring_space) {
+		ret = -ENOMEM;
+		goto err_out_cleardev;
+	}
+	sis_priv->tx_ring = ring_space;
+	sis_priv->tx_ring_dma = ring_dma;
+
+	ring_space = pci_alloc_consistent(pci_dev, RX_TOTAL_SIZE, &ring_dma);
+	if (!ring_space) {
+		ret = -ENOMEM;
+		goto err_unmap_tx;
+	}
+	sis_priv->rx_ring = ring_space;
+	sis_priv->rx_ring_dma = ring_dma;
+
+	/* The SiS900-specific entries in the device structure. */
+	net_dev->netdev_ops = &sis900_netdev_ops;
+	net_dev->watchdog_timeo = TX_TIMEOUT;
+	net_dev->ethtool_ops = &sis900_ethtool_ops;
+
+	if (sis900_debug > 0)
+		sis_priv->msg_enable = sis900_debug;
+	else
+		sis_priv->msg_enable = SIS900_DEF_MSG;
+
+	sis_priv->mii_info.dev = net_dev;
+	sis_priv->mii_info.mdio_read = mdio_read;
+	sis_priv->mii_info.mdio_write = mdio_write;
+	sis_priv->mii_info.phy_id_mask = 0x1f;
+	sis_priv->mii_info.reg_num_mask = 0x1f;
+
+	/* Get Mac address according to the chip revision */
+	sis_priv->chipset_rev = pci_dev->revision;
+	if(netif_msg_probe(sis_priv))
+		printk(KERN_DEBUG "%s: detected revision %2.2x, "
+				"trying to get MAC address...\n",
+				dev_name, sis_priv->chipset_rev);
+
+	ret = 0;
+	if (sis_priv->chipset_rev == SIS630E_900_REV)
+		ret = sis630e_get_mac_addr(pci_dev, net_dev);
+	else if ((sis_priv->chipset_rev > 0x81) && (sis_priv->chipset_rev <= 0x90) )
+		ret = sis635_get_mac_addr(pci_dev, net_dev);
+	else if (sis_priv->chipset_rev == SIS96x_900_REV)
+		ret = sis96x_get_mac_addr(pci_dev, net_dev);
+	else
+		ret = sis900_get_mac_addr(pci_dev, net_dev);
+
+	if (!ret || !is_valid_ether_addr(net_dev->dev_addr)) {
+		random_ether_addr(net_dev->dev_addr);
+		printk(KERN_WARNING "%s: Unreadable or invalid MAC address,"
+				"using random generated one\n", dev_name);
+	}
+
+	/* 630ET : set the mii access mode as software-mode */
+	if (sis_priv->chipset_rev == SIS630ET_900_REV)
+		outl(ACCESSMODE | inl(ioaddr + cr), ioaddr + cr);
+
+	/* probe for mii transceiver */
+	if (sis900_mii_probe(net_dev) == 0) {
+		printk(KERN_WARNING "%s: Error probing MII device.\n",
+		       dev_name);
+		ret = -ENODEV;
+		goto err_unmap_rx;
+	}
+
+	/* save our host bridge revision */
+	dev = pci_get_device(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_630, NULL);
+	if (dev) {
+		sis_priv->host_bridge_rev = dev->revision;
+		pci_dev_put(dev);
+	}
+
+	ret = register_netdev(net_dev);
+	if (ret)
+		goto err_unmap_rx;
+
+	/* print some information about our NIC */
+	printk(KERN_INFO "%s: %s at %#lx, IRQ %d, %pM\n",
+	       net_dev->name, card_name, ioaddr, net_dev->irq,
+	       net_dev->dev_addr);
+
+	/* Detect Wake on Lan support */
+	ret = (inl(net_dev->base_addr + CFGPMC) & PMESP) >> 27;
+	if (netif_msg_probe(sis_priv) && (ret & PME_D3C) == 0)
+		printk(KERN_INFO "%s: Wake on LAN only available from suspend to RAM.", net_dev->name);
+
+	return 0;
+
+ err_unmap_rx:
+	pci_free_consistent(pci_dev, RX_TOTAL_SIZE, sis_priv->rx_ring,
+		sis_priv->rx_ring_dma);
+ err_unmap_tx:
+	pci_free_consistent(pci_dev, TX_TOTAL_SIZE, sis_priv->tx_ring,
+		sis_priv->tx_ring_dma);
+ err_out_cleardev:
+ 	pci_set_drvdata(pci_dev, NULL);
+	pci_release_regions(pci_dev);
+ err_out:
+	free_netdev(net_dev);
+	return ret;
+}
+
+/**
+ *	sis900_mii_probe - Probe MII PHY for sis900
+ *	@net_dev: the net device to probe for
+ *
+ *	Search for total of 32 possible mii phy addresses.
+ *	Identify and set current phy if found one,
+ *	return error if it failed to found.
+ */
+
+static int __devinit sis900_mii_probe(struct net_device * net_dev)
+{
+	struct sis900_private *sis_priv = netdev_priv(net_dev);
+	const char *dev_name = pci_name(sis_priv->pci_dev);
+	u16 poll_bit = MII_STAT_LINK, status = 0;
+	unsigned long timeout = jiffies + 5 * HZ;
+	int phy_addr;
+
+	sis_priv->mii = NULL;
+
+	/* search for total of 32 possible mii phy addresses */
+	for (phy_addr = 0; phy_addr < 32; phy_addr++) {
+		struct mii_phy * mii_phy = NULL;
+		u16 mii_status;
+		int i;
+
+		mii_phy = NULL;
+		for(i = 0; i < 2; i++)
+			mii_status = mdio_read(net_dev, phy_addr, MII_STATUS);
+
+		if (mii_status == 0xffff || mii_status == 0x0000) {
+			if (netif_msg_probe(sis_priv))
+				printk(KERN_DEBUG "%s: MII at address %d"
+						" not accessible\n",
+						dev_name, phy_addr);
+			continue;
+		}
+
+		if ((mii_phy = kmalloc(sizeof(struct mii_phy), GFP_KERNEL)) == NULL) {
+			printk(KERN_WARNING "Cannot allocate mem for struct mii_phy\n");
+			mii_phy = sis_priv->first_mii;
+			while (mii_phy) {
+				struct mii_phy *phy;
+				phy = mii_phy;
+				mii_phy = mii_phy->next;
+				kfree(phy);
+			}
+			return 0;
+		}
+
+		mii_phy->phy_id0 = mdio_read(net_dev, phy_addr, MII_PHY_ID0);
+		mii_phy->phy_id1 = mdio_read(net_dev, phy_addr, MII_PHY_ID1);
+		mii_phy->phy_addr = phy_addr;
+		mii_phy->status = mii_status;
+		mii_phy->next = sis_priv->mii;
+		sis_priv->mii = mii_phy;
+		sis_priv->first_mii = mii_phy;
+
+		for (i = 0; mii_chip_table[i].phy_id1; i++)
+			if ((mii_phy->phy_id0 == mii_chip_table[i].phy_id0 ) &&
+			    ((mii_phy->phy_id1 & 0xFFF0) == mii_chip_table[i].phy_id1)){
+				mii_phy->phy_types = mii_chip_table[i].phy_types;
+				if (mii_chip_table[i].phy_types == MIX)
+					mii_phy->phy_types =
+					    (mii_status & (MII_STAT_CAN_TX_FDX | MII_STAT_CAN_TX)) ? LAN : HOME;
+				printk(KERN_INFO "%s: %s transceiver found "
+							"at address %d.\n",
+							dev_name,
+							mii_chip_table[i].name,
+							phy_addr);
+				break;
+			}
+
+		if( !mii_chip_table[i].phy_id1 ) {
+			printk(KERN_INFO "%s: Unknown PHY transceiver found at address %d.\n",
+			       dev_name, phy_addr);
+			mii_phy->phy_types = UNKNOWN;
+		}
+	}
+
+	if (sis_priv->mii == NULL) {
+		printk(KERN_INFO "%s: No MII transceivers found!\n", dev_name);
+		return 0;
+	}
+
+	/* select default PHY for mac */
+	sis_priv->mii = NULL;
+	sis900_default_phy( net_dev );
+
+	/* Reset phy if default phy is internal sis900 */
+        if ((sis_priv->mii->phy_id0 == 0x001D) &&
+	    ((sis_priv->mii->phy_id1&0xFFF0) == 0x8000))
+        	status = sis900_reset_phy(net_dev, sis_priv->cur_phy);
+
+        /* workaround for ICS1893 PHY */
+        if ((sis_priv->mii->phy_id0 == 0x0015) &&
+            ((sis_priv->mii->phy_id1&0xFFF0) == 0xF440))
+            	mdio_write(net_dev, sis_priv->cur_phy, 0x0018, 0xD200);
+
+	if(status & MII_STAT_LINK){
+		while (poll_bit) {
+			yield();
+
+			poll_bit ^= (mdio_read(net_dev, sis_priv->cur_phy, MII_STATUS) & poll_bit);
+			if (time_after_eq(jiffies, timeout)) {
+				printk(KERN_WARNING "%s: reset phy and link down now\n",
+				       dev_name);
+				return -ETIME;
+			}
+		}
+	}
+
+	if (sis_priv->chipset_rev == SIS630E_900_REV) {
+		/* SiS 630E has some bugs on default value of PHY registers */
+		mdio_write(net_dev, sis_priv->cur_phy, MII_ANADV, 0x05e1);
+		mdio_write(net_dev, sis_priv->cur_phy, MII_CONFIG1, 0x22);
+		mdio_write(net_dev, sis_priv->cur_phy, MII_CONFIG2, 0xff00);
+		mdio_write(net_dev, sis_priv->cur_phy, MII_MASK, 0xffc0);
+		//mdio_write(net_dev, sis_priv->cur_phy, MII_CONTROL, 0x1000);
+	}
+
+	if (sis_priv->mii->status & MII_STAT_LINK)
+		netif_carrier_on(net_dev);
+	else
+		netif_carrier_off(net_dev);
+
+	return 1;
+}
+
+/**
+ *	sis900_default_phy - Select default PHY for sis900 mac.
+ *	@net_dev: the net device to probe for
+ *
+ *	Select first detected PHY with link as default.
+ *	If no one is link on, select PHY whose types is HOME as default.
+ *	If HOME doesn't exist, select LAN.
+ */
+
+static u16 sis900_default_phy(struct net_device * net_dev)
+{
+	struct sis900_private *sis_priv = netdev_priv(net_dev);
+ 	struct mii_phy *phy = NULL, *phy_home = NULL,
+		*default_phy = NULL, *phy_lan = NULL;
+	u16 status;
+
+        for (phy=sis_priv->first_mii; phy; phy=phy->next) {
+		status = mdio_read(net_dev, phy->phy_addr, MII_STATUS);
+		status = mdio_read(net_dev, phy->phy_addr, MII_STATUS);
+
+		/* Link ON & Not select default PHY & not ghost PHY */
+		 if ((status & MII_STAT_LINK) && !default_phy &&
+					(phy->phy_types != UNKNOWN))
+		 	default_phy = phy;
+		 else {
+			status = mdio_read(net_dev, phy->phy_addr, MII_CONTROL);
+			mdio_write(net_dev, phy->phy_addr, MII_CONTROL,
+				status | MII_CNTL_AUTO | MII_CNTL_ISOLATE);
+			if (phy->phy_types == HOME)
+				phy_home = phy;
+			else if(phy->phy_types == LAN)
+				phy_lan = phy;
+		 }
+	}
+
+	if (!default_phy && phy_home)
+		default_phy = phy_home;
+	else if (!default_phy && phy_lan)
+		default_phy = phy_lan;
+	else if (!default_phy)
+		default_phy = sis_priv->first_mii;
+
+	if (sis_priv->mii != default_phy) {
+		sis_priv->mii = default_phy;
+		sis_priv->cur_phy = default_phy->phy_addr;
+		printk(KERN_INFO "%s: Using transceiver found at address %d as default\n",
+		       pci_name(sis_priv->pci_dev), sis_priv->cur_phy);
+	}
+
+	sis_priv->mii_info.phy_id = sis_priv->cur_phy;
+
+	status = mdio_read(net_dev, sis_priv->cur_phy, MII_CONTROL);
+	status &= (~MII_CNTL_ISOLATE);
+
+	mdio_write(net_dev, sis_priv->cur_phy, MII_CONTROL, status);
+	status = mdio_read(net_dev, sis_priv->cur_phy, MII_STATUS);
+	status = mdio_read(net_dev, sis_priv->cur_phy, MII_STATUS);
+
+	return status;
+}
+
+
+/**
+ * 	sis900_set_capability - set the media capability of network adapter.
+ *	@net_dev : the net device to probe for
+ *	@phy : default PHY
+ *
+ *	Set the media capability of network adapter according to
+ *	mii status register. It's necessary before auto-negotiate.
+ */
+
+static void sis900_set_capability(struct net_device *net_dev, struct mii_phy *phy)
+{
+	u16 cap;
+	u16 status;
+
+	status = mdio_read(net_dev, phy->phy_addr, MII_STATUS);
+	status = mdio_read(net_dev, phy->phy_addr, MII_STATUS);
+
+	cap = MII_NWAY_CSMA_CD |
+		((phy->status & MII_STAT_CAN_TX_FDX)? MII_NWAY_TX_FDX:0) |
+		((phy->status & MII_STAT_CAN_TX)    ? MII_NWAY_TX:0) |
+		((phy->status & MII_STAT_CAN_T_FDX) ? MII_NWAY_T_FDX:0)|
+		((phy->status & MII_STAT_CAN_T)     ? MII_NWAY_T:0);
+
+	mdio_write(net_dev, phy->phy_addr, MII_ANADV, cap);
+}
+
+
+/* Delay between EEPROM clock transitions. */
+#define eeprom_delay()  inl(ee_addr)
+
+/**
+ *	read_eeprom - Read Serial EEPROM
+ *	@ioaddr: base i/o address
+ *	@location: the EEPROM location to read
+ *
+ *	Read Serial EEPROM through EEPROM Access Register.
+ *	Note that location is in word (16 bits) unit
+ */
+
+static u16 __devinit read_eeprom(long ioaddr, int location)
+{
+	int i;
+	u16 retval = 0;
+	long ee_addr = ioaddr + mear;
+	u32 read_cmd = location | EEread;
+
+	outl(0, ee_addr);
+	eeprom_delay();
+	outl(EECS, ee_addr);
+	eeprom_delay();
+
+	/* Shift the read command (9) bits out. */
+	for (i = 8; i >= 0; i--) {
+		u32 dataval = (read_cmd & (1 << i)) ? EEDI | EECS : EECS;
+		outl(dataval, ee_addr);
+		eeprom_delay();
+		outl(dataval | EECLK, ee_addr);
+		eeprom_delay();
+	}
+	outl(EECS, ee_addr);
+	eeprom_delay();
+
+	/* read the 16-bits data in */
+	for (i = 16; i > 0; i--) {
+		outl(EECS, ee_addr);
+		eeprom_delay();
+		outl(EECS | EECLK, ee_addr);
+		eeprom_delay();
+		retval = (retval << 1) | ((inl(ee_addr) & EEDO) ? 1 : 0);
+		eeprom_delay();
+	}
+
+	/* Terminate the EEPROM access. */
+	outl(0, ee_addr);
+	eeprom_delay();
+
+	return retval;
+}
+
+/* Read and write the MII management registers using software-generated
+   serial MDIO protocol. Note that the command bits and data bits are
+   send out separately */
+#define mdio_delay()    inl(mdio_addr)
+
+static void mdio_idle(long mdio_addr)
+{
+	outl(MDIO | MDDIR, mdio_addr);
+	mdio_delay();
+	outl(MDIO | MDDIR | MDC, mdio_addr);
+}
+
+/* Syncronize the MII management interface by shifting 32 one bits out. */
+static void mdio_reset(long mdio_addr)
+{
+	int i;
+
+	for (i = 31; i >= 0; i--) {
+		outl(MDDIR | MDIO, mdio_addr);
+		mdio_delay();
+		outl(MDDIR | MDIO | MDC, mdio_addr);
+		mdio_delay();
+	}
+}
+
+/**
+ *	mdio_read - read MII PHY register
+ *	@net_dev: the net device to read
+ *	@phy_id: the phy address to read
+ *	@location: the phy regiester id to read
+ *
+ *	Read MII registers through MDIO and MDC
+ *	using MDIO management frame structure and protocol(defined by ISO/IEC).
+ *	Please see SiS7014 or ICS spec
+ */
+
+static int mdio_read(struct net_device *net_dev, int phy_id, int location)
+{
+	long mdio_addr = net_dev->base_addr + mear;
+	int mii_cmd = MIIread|(phy_id<<MIIpmdShift)|(location<<MIIregShift);
+	u16 retval = 0;
+	int i;
+
+	mdio_reset(mdio_addr);
+	mdio_idle(mdio_addr);
+
+	for (i = 15; i >= 0; i--) {
+		int dataval = (mii_cmd & (1 << i)) ? MDDIR | MDIO : MDDIR;
+		outl(dataval, mdio_addr);
+		mdio_delay();
+		outl(dataval | MDC, mdio_addr);
+		mdio_delay();
+	}
+
+	/* Read the 16 data bits. */
+	for (i = 16; i > 0; i--) {
+		outl(0, mdio_addr);
+		mdio_delay();
+		retval = (retval << 1) | ((inl(mdio_addr) & MDIO) ? 1 : 0);
+		outl(MDC, mdio_addr);
+		mdio_delay();
+	}
+	outl(0x00, mdio_addr);
+
+	return retval;
+}
+
+/**
+ *	mdio_write - write MII PHY register
+ *	@net_dev: the net device to write
+ *	@phy_id: the phy address to write
+ *	@location: the phy regiester id to write
+ *	@value: the register value to write with
+ *
+ *	Write MII registers with @value through MDIO and MDC
+ *	using MDIO management frame structure and protocol(defined by ISO/IEC)
+ *	please see SiS7014 or ICS spec
+ */
+
+static void mdio_write(struct net_device *net_dev, int phy_id, int location,
+			int value)
+{
+	long mdio_addr = net_dev->base_addr + mear;
+	int mii_cmd = MIIwrite|(phy_id<<MIIpmdShift)|(location<<MIIregShift);
+	int i;
+
+	mdio_reset(mdio_addr);
+	mdio_idle(mdio_addr);
+
+	/* Shift the command bits out. */
+	for (i = 15; i >= 0; i--) {
+		int dataval = (mii_cmd & (1 << i)) ? MDDIR | MDIO : MDDIR;
+		outb(dataval, mdio_addr);
+		mdio_delay();
+		outb(dataval | MDC, mdio_addr);
+		mdio_delay();
+	}
+	mdio_delay();
+
+	/* Shift the value bits out. */
+	for (i = 15; i >= 0; i--) {
+		int dataval = (value & (1 << i)) ? MDDIR | MDIO : MDDIR;
+		outl(dataval, mdio_addr);
+		mdio_delay();
+		outl(dataval | MDC, mdio_addr);
+		mdio_delay();
+	}
+	mdio_delay();
+
+	/* Clear out extra bits. */
+	for (i = 2; i > 0; i--) {
+		outb(0, mdio_addr);
+		mdio_delay();
+		outb(MDC, mdio_addr);
+		mdio_delay();
+	}
+	outl(0x00, mdio_addr);
+}
+
+
+/**
+ *	sis900_reset_phy - reset sis900 mii phy.
+ *	@net_dev: the net device to write
+ *	@phy_addr: default phy address
+ *
+ *	Some specific phy can't work properly without reset.
+ *	This function will be called during initialization and
+ *	link status change from ON to DOWN.
+ */
+
+static u16 sis900_reset_phy(struct net_device *net_dev, int phy_addr)
+{
+	int i;
+	u16 status;
+
+	for (i = 0; i < 2; i++)
+		status = mdio_read(net_dev, phy_addr, MII_STATUS);
+
+	mdio_write( net_dev, phy_addr, MII_CONTROL, MII_CNTL_RESET );
+
+	return status;
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/*
+ * Polling 'interrupt' - used by things like netconsole to send skbs
+ * without having to re-enable interrupts. It's not called while
+ * the interrupt routine is executing.
+*/
+static void sis900_poll(struct net_device *dev)
+{
+	disable_irq(dev->irq);
+	sis900_interrupt(dev->irq, dev);
+	enable_irq(dev->irq);
+}
+#endif
+
+/**
+ *	sis900_open - open sis900 device
+ *	@net_dev: the net device to open
+ *
+ *	Do some initialization and start net interface.
+ *	enable interrupts and set sis900 timer.
+ */
+
+static int
+sis900_open(struct net_device *net_dev)
+{
+	struct sis900_private *sis_priv = netdev_priv(net_dev);
+	long ioaddr = net_dev->base_addr;
+	int ret;
+
+	/* Soft reset the chip. */
+	sis900_reset(net_dev);
+
+	/* Equalizer workaround Rule */
+	sis630_set_eq(net_dev, sis_priv->chipset_rev);
+
+	ret = request_irq(net_dev->irq, sis900_interrupt, IRQF_SHARED,
+						net_dev->name, net_dev);
+	if (ret)
+		return ret;
+
+	sis900_init_rxfilter(net_dev);
+
+	sis900_init_tx_ring(net_dev);
+	sis900_init_rx_ring(net_dev);
+
+	set_rx_mode(net_dev);
+
+	netif_start_queue(net_dev);
+
+	/* Workaround for EDB */
+	sis900_set_mode(ioaddr, HW_SPEED_10_MBPS, FDX_CAPABLE_HALF_SELECTED);
+
+	/* Enable all known interrupts by setting the interrupt mask. */
+	outl((RxSOVR|RxORN|RxERR|RxOK|TxURN|TxERR|TxIDLE), ioaddr + imr);
+	outl(RxENA | inl(ioaddr + cr), ioaddr + cr);
+	outl(IE, ioaddr + ier);
+
+	sis900_check_mode(net_dev, sis_priv->mii);
+
+	/* Set the timer to switch to check for link beat and perhaps switch
+	   to an alternate media type. */
+	init_timer(&sis_priv->timer);
+	sis_priv->timer.expires = jiffies + HZ;
+	sis_priv->timer.data = (unsigned long)net_dev;
+	sis_priv->timer.function = sis900_timer;
+	add_timer(&sis_priv->timer);
+
+	return 0;
+}
+
+/**
+ *	sis900_init_rxfilter - Initialize the Rx filter
+ *	@net_dev: the net device to initialize for
+ *
+ *	Set receive filter address to our MAC address
+ *	and enable packet filtering.
+ */
+
+static void
+sis900_init_rxfilter (struct net_device * net_dev)
+{
+	struct sis900_private *sis_priv = netdev_priv(net_dev);
+	long ioaddr = net_dev->base_addr;
+	u32 rfcrSave;
+	u32 i;
+
+	rfcrSave = inl(rfcr + ioaddr);
+
+	/* disable packet filtering before setting filter */
+	outl(rfcrSave & ~RFEN, rfcr + ioaddr);
+
+	/* load MAC addr to filter data register */
+	for (i = 0 ; i < 3 ; i++) {
+		u32 w;
+
+		w = (u32) *((u16 *)(net_dev->dev_addr)+i);
+		outl((i << RFADDR_shift), ioaddr + rfcr);
+		outl(w, ioaddr + rfdr);
+
+		if (netif_msg_hw(sis_priv)) {
+			printk(KERN_DEBUG "%s: Receive Filter Addrss[%d]=%x\n",
+			       net_dev->name, i, inl(ioaddr + rfdr));
+		}
+	}
+
+	/* enable packet filtering */
+	outl(rfcrSave | RFEN, rfcr + ioaddr);
+}
+
+/**
+ *	sis900_init_tx_ring - Initialize the Tx descriptor ring
+ *	@net_dev: the net device to initialize for
+ *
+ *	Initialize the Tx descriptor ring,
+ */
+
+static void
+sis900_init_tx_ring(struct net_device *net_dev)
+{
+	struct sis900_private *sis_priv = netdev_priv(net_dev);
+	long ioaddr = net_dev->base_addr;
+	int i;
+
+	sis_priv->tx_full = 0;
+	sis_priv->dirty_tx = sis_priv->cur_tx = 0;
+
+	for (i = 0; i < NUM_TX_DESC; i++) {
+		sis_priv->tx_skbuff[i] = NULL;
+
+		sis_priv->tx_ring[i].link = sis_priv->tx_ring_dma +
+			((i+1)%NUM_TX_DESC)*sizeof(BufferDesc);
+		sis_priv->tx_ring[i].cmdsts = 0;
+		sis_priv->tx_ring[i].bufptr = 0;
+	}
+
+	/* load Transmit Descriptor Register */
+	outl(sis_priv->tx_ring_dma, ioaddr + txdp);
+	if (netif_msg_hw(sis_priv))
+		printk(KERN_DEBUG "%s: TX descriptor register loaded with: %8.8x\n",
+		       net_dev->name, inl(ioaddr + txdp));
+}
+
+/**
+ *	sis900_init_rx_ring - Initialize the Rx descriptor ring
+ *	@net_dev: the net device to initialize for
+ *
+ *	Initialize the Rx descriptor ring,
+ *	and pre-allocate recevie buffers (socket buffer)
+ */
+
+static void
+sis900_init_rx_ring(struct net_device *net_dev)
+{
+	struct sis900_private *sis_priv = netdev_priv(net_dev);
+	long ioaddr = net_dev->base_addr;
+	int i;
+
+	sis_priv->cur_rx = 0;
+	sis_priv->dirty_rx = 0;
+
+	/* init RX descriptor */
+	for (i = 0; i < NUM_RX_DESC; i++) {
+		sis_priv->rx_skbuff[i] = NULL;
+
+		sis_priv->rx_ring[i].link = sis_priv->rx_ring_dma +
+			((i+1)%NUM_RX_DESC)*sizeof(BufferDesc);
+		sis_priv->rx_ring[i].cmdsts = 0;
+		sis_priv->rx_ring[i].bufptr = 0;
+	}
+
+	/* allocate sock buffers */
+	for (i = 0; i < NUM_RX_DESC; i++) {
+		struct sk_buff *skb;
+
+		if ((skb = dev_alloc_skb(RX_BUF_SIZE)) == NULL) {
+			/* not enough memory for skbuff, this makes a "hole"
+			   on the buffer ring, it is not clear how the
+			   hardware will react to this kind of degenerated
+			   buffer */
+			break;
+		}
+		sis_priv->rx_skbuff[i] = skb;
+		sis_priv->rx_ring[i].cmdsts = RX_BUF_SIZE;
+                sis_priv->rx_ring[i].bufptr = pci_map_single(sis_priv->pci_dev,
+                        skb->data, RX_BUF_SIZE, PCI_DMA_FROMDEVICE);
+	}
+	sis_priv->dirty_rx = (unsigned int) (i - NUM_RX_DESC);
+
+	/* load Receive Descriptor Register */
+	outl(sis_priv->rx_ring_dma, ioaddr + rxdp);
+	if (netif_msg_hw(sis_priv))
+		printk(KERN_DEBUG "%s: RX descriptor register loaded with: %8.8x\n",
+		       net_dev->name, inl(ioaddr + rxdp));
+}
+
+/**
+ *	sis630_set_eq - set phy equalizer value for 630 LAN
+ *	@net_dev: the net device to set equalizer value
+ *	@revision: 630 LAN revision number
+ *
+ *	630E equalizer workaround rule(Cyrus Huang 08/15)
+ *	PHY register 14h(Test)
+ *	Bit 14: 0 -- Automatically detect (default)
+ *		1 -- Manually set Equalizer filter
+ *	Bit 13: 0 -- (Default)
+ *		1 -- Speed up convergence of equalizer setting
+ *	Bit 9 : 0 -- (Default)
+ *		1 -- Disable Baseline Wander
+ *	Bit 3~7   -- Equalizer filter setting
+ *	Link ON: Set Bit 9, 13 to 1, Bit 14 to 0
+ *	Then calculate equalizer value
+ *	Then set equalizer value, and set Bit 14 to 1, Bit 9 to 0
+ *	Link Off:Set Bit 13 to 1, Bit 14 to 0
+ *	Calculate Equalizer value:
+ *	When Link is ON and Bit 14 is 0, SIS900PHY will auto-detect proper equalizer value.
+ *	When the equalizer is stable, this value is not a fixed value. It will be within
+ *	a small range(eg. 7~9). Then we get a minimum and a maximum value(eg. min=7, max=9)
+ *	0 <= max <= 4  --> set equalizer to max
+ *	5 <= max <= 14 --> set equalizer to max+1 or set equalizer to max+2 if max == min
+ *	max >= 15      --> set equalizer to max+5 or set equalizer to max+6 if max == min
+ */
+
+static void sis630_set_eq(struct net_device *net_dev, u8 revision)
+{
+	struct sis900_private *sis_priv = netdev_priv(net_dev);
+	u16 reg14h, eq_value=0, max_value=0, min_value=0;
+	int i, maxcount=10;
+
+	if ( !(revision == SIS630E_900_REV || revision == SIS630EA1_900_REV ||
+	       revision == SIS630A_900_REV || revision ==  SIS630ET_900_REV) )
+		return;
+
+	if (netif_carrier_ok(net_dev)) {
+		reg14h = mdio_read(net_dev, sis_priv->cur_phy, MII_RESV);
+		mdio_write(net_dev, sis_priv->cur_phy, MII_RESV,
+					(0x2200 | reg14h) & 0xBFFF);
+		for (i=0; i < maxcount; i++) {
+			eq_value = (0x00F8 & mdio_read(net_dev,
+					sis_priv->cur_phy, MII_RESV)) >> 3;
+			if (i == 0)
+				max_value=min_value=eq_value;
+			max_value = (eq_value > max_value) ?
+						eq_value : max_value;
+			min_value = (eq_value < min_value) ?
+						eq_value : min_value;
+		}
+		/* 630E rule to determine the equalizer value */
+		if (revision == SIS630E_900_REV || revision == SIS630EA1_900_REV ||
+		    revision == SIS630ET_900_REV) {
+			if (max_value < 5)
+				eq_value = max_value;
+			else if (max_value >= 5 && max_value < 15)
+				eq_value = (max_value == min_value) ?
+						max_value+2 : max_value+1;
+			else if (max_value >= 15)
+				eq_value=(max_value == min_value) ?
+						max_value+6 : max_value+5;
+		}
+		/* 630B0&B1 rule to determine the equalizer value */
+		if (revision == SIS630A_900_REV &&
+		    (sis_priv->host_bridge_rev == SIS630B0 ||
+		     sis_priv->host_bridge_rev == SIS630B1)) {
+			if (max_value == 0)
+				eq_value = 3;
+			else
+				eq_value = (max_value + min_value + 1)/2;
+		}
+		/* write equalizer value and setting */
+		reg14h = mdio_read(net_dev, sis_priv->cur_phy, MII_RESV);
+		reg14h = (reg14h & 0xFF07) | ((eq_value << 3) & 0x00F8);
+		reg14h = (reg14h | 0x6000) & 0xFDFF;
+		mdio_write(net_dev, sis_priv->cur_phy, MII_RESV, reg14h);
+	} else {
+		reg14h = mdio_read(net_dev, sis_priv->cur_phy, MII_RESV);
+		if (revision == SIS630A_900_REV &&
+		    (sis_priv->host_bridge_rev == SIS630B0 ||
+		     sis_priv->host_bridge_rev == SIS630B1))
+			mdio_write(net_dev, sis_priv->cur_phy, MII_RESV,
+						(reg14h | 0x2200) & 0xBFFF);
+		else
+			mdio_write(net_dev, sis_priv->cur_phy, MII_RESV,
+						(reg14h | 0x2000) & 0xBFFF);
+	}
+}
+
+/**
+ *	sis900_timer - sis900 timer routine
+ *	@data: pointer to sis900 net device
+ *
+ *	On each timer ticks we check two things,
+ *	link status (ON/OFF) and link mode (10/100/Full/Half)
+ */
+
+static void sis900_timer(unsigned long data)
+{
+	struct net_device *net_dev = (struct net_device *)data;
+	struct sis900_private *sis_priv = netdev_priv(net_dev);
+	struct mii_phy *mii_phy = sis_priv->mii;
+	static const int next_tick = 5*HZ;
+	u16 status;
+
+	if (!sis_priv->autong_complete){
+		int uninitialized_var(speed), duplex = 0;
+
+		sis900_read_mode(net_dev, &speed, &duplex);
+		if (duplex){
+			sis900_set_mode(net_dev->base_addr, speed, duplex);
+			sis630_set_eq(net_dev, sis_priv->chipset_rev);
+			netif_start_queue(net_dev);
+		}
+
+		sis_priv->timer.expires = jiffies + HZ;
+		add_timer(&sis_priv->timer);
+		return;
+	}
+
+	status = mdio_read(net_dev, sis_priv->cur_phy, MII_STATUS);
+	status = mdio_read(net_dev, sis_priv->cur_phy, MII_STATUS);
+
+	/* Link OFF -> ON */
+	if (!netif_carrier_ok(net_dev)) {
+	LookForLink:
+		/* Search for new PHY */
+		status = sis900_default_phy(net_dev);
+		mii_phy = sis_priv->mii;
+
+		if (status & MII_STAT_LINK){
+			sis900_check_mode(net_dev, mii_phy);
+			netif_carrier_on(net_dev);
+		}
+	} else {
+	/* Link ON -> OFF */
+                if (!(status & MII_STAT_LINK)){
+                	netif_carrier_off(net_dev);
+			if(netif_msg_link(sis_priv))
+                		printk(KERN_INFO "%s: Media Link Off\n", net_dev->name);
+
+                	/* Change mode issue */
+                	if ((mii_phy->phy_id0 == 0x001D) &&
+			    ((mii_phy->phy_id1 & 0xFFF0) == 0x8000))
+               			sis900_reset_phy(net_dev,  sis_priv->cur_phy);
+
+			sis630_set_eq(net_dev, sis_priv->chipset_rev);
+
+                	goto LookForLink;
+                }
+	}
+
+	sis_priv->timer.expires = jiffies + next_tick;
+	add_timer(&sis_priv->timer);
+}
+
+/**
+ *	sis900_check_mode - check the media mode for sis900
+ *	@net_dev: the net device to be checked
+ *	@mii_phy: the mii phy
+ *
+ *	Older driver gets the media mode from mii status output
+ *	register. Now we set our media capability and auto-negotiate
+ *	to get the upper bound of speed and duplex between two ends.
+ *	If the types of mii phy is HOME, it doesn't need to auto-negotiate
+ *	and autong_complete should be set to 1.
+ */
+
+static void sis900_check_mode(struct net_device *net_dev, struct mii_phy *mii_phy)
+{
+	struct sis900_private *sis_priv = netdev_priv(net_dev);
+	long ioaddr = net_dev->base_addr;
+	int speed, duplex;
+
+	if (mii_phy->phy_types == LAN) {
+		outl(~EXD & inl(ioaddr + cfg), ioaddr + cfg);
+		sis900_set_capability(net_dev , mii_phy);
+		sis900_auto_negotiate(net_dev, sis_priv->cur_phy);
+	} else {
+		outl(EXD | inl(ioaddr + cfg), ioaddr + cfg);
+		speed = HW_SPEED_HOME;
+		duplex = FDX_CAPABLE_HALF_SELECTED;
+		sis900_set_mode(ioaddr, speed, duplex);
+		sis_priv->autong_complete = 1;
+	}
+}
+
+/**
+ *	sis900_set_mode - Set the media mode of mac register.
+ *	@ioaddr: the address of the device
+ *	@speed : the transmit speed to be determined
+ *	@duplex: the duplex mode to be determined
+ *
+ *	Set the media mode of mac register txcfg/rxcfg according to
+ *	speed and duplex of phy. Bit EDB_MASTER_EN indicates the EDB
+ *	bus is used instead of PCI bus. When this bit is set 1, the
+ *	Max DMA Burst Size for TX/RX DMA should be no larger than 16
+ *	double words.
+ */
+
+static void sis900_set_mode (long ioaddr, int speed, int duplex)
+{
+	u32 tx_flags = 0, rx_flags = 0;
+
+	if (inl(ioaddr + cfg) & EDB_MASTER_EN) {
+		tx_flags = TxATP | (DMA_BURST_64 << TxMXDMA_shift) |
+					(TX_FILL_THRESH << TxFILLT_shift);
+		rx_flags = DMA_BURST_64 << RxMXDMA_shift;
+	} else {
+		tx_flags = TxATP | (DMA_BURST_512 << TxMXDMA_shift) |
+					(TX_FILL_THRESH << TxFILLT_shift);
+		rx_flags = DMA_BURST_512 << RxMXDMA_shift;
+	}
+
+	if (speed == HW_SPEED_HOME || speed == HW_SPEED_10_MBPS) {
+		rx_flags |= (RxDRNT_10 << RxDRNT_shift);
+		tx_flags |= (TxDRNT_10 << TxDRNT_shift);
+	} else {
+		rx_flags |= (RxDRNT_100 << RxDRNT_shift);
+		tx_flags |= (TxDRNT_100 << TxDRNT_shift);
+	}
+
+	if (duplex == FDX_CAPABLE_FULL_SELECTED) {
+		tx_flags |= (TxCSI | TxHBI);
+		rx_flags |= RxATX;
+	}
+
+#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
+	/* Can accept Jumbo packet */
+	rx_flags |= RxAJAB;
+#endif
+
+	outl (tx_flags, ioaddr + txcfg);
+	outl (rx_flags, ioaddr + rxcfg);
+}
+
+/**
+ *	sis900_auto_negotiate - Set the Auto-Negotiation Enable/Reset bit.
+ *	@net_dev: the net device to read mode for
+ *	@phy_addr: mii phy address
+ *
+ *	If the adapter is link-on, set the auto-negotiate enable/reset bit.
+ *	autong_complete should be set to 0 when starting auto-negotiation.
+ *	autong_complete should be set to 1 if we didn't start auto-negotiation.
+ *	sis900_timer will wait for link on again if autong_complete = 0.
+ */
+
+static void sis900_auto_negotiate(struct net_device *net_dev, int phy_addr)
+{
+	struct sis900_private *sis_priv = netdev_priv(net_dev);
+	int i = 0;
+	u32 status;
+
+	for (i = 0; i < 2; i++)
+		status = mdio_read(net_dev, phy_addr, MII_STATUS);
+
+	if (!(status & MII_STAT_LINK)){
+		if(netif_msg_link(sis_priv))
+			printk(KERN_INFO "%s: Media Link Off\n", net_dev->name);
+		sis_priv->autong_complete = 1;
+		netif_carrier_off(net_dev);
+		return;
+	}
+
+	/* (Re)start AutoNegotiate */
+	mdio_write(net_dev, phy_addr, MII_CONTROL,
+		   MII_CNTL_AUTO | MII_CNTL_RST_AUTO);
+	sis_priv->autong_complete = 0;
+}
+
+
+/**
+ *	sis900_read_mode - read media mode for sis900 internal phy
+ *	@net_dev: the net device to read mode for
+ *	@speed  : the transmit speed to be determined
+ *	@duplex : the duplex mode to be determined
+ *
+ *	The capability of remote end will be put in mii register autorec
+ *	after auto-negotiation. Use AND operation to get the upper bound
+ *	of speed and duplex between two ends.
+ */
+
+static void sis900_read_mode(struct net_device *net_dev, int *speed, int *duplex)
+{
+	struct sis900_private *sis_priv = netdev_priv(net_dev);
+	struct mii_phy *phy = sis_priv->mii;
+	int phy_addr = sis_priv->cur_phy;
+	u32 status;
+	u16 autoadv, autorec;
+	int i;
+
+	for (i = 0; i < 2; i++)
+		status = mdio_read(net_dev, phy_addr, MII_STATUS);
+
+	if (!(status & MII_STAT_LINK))
+		return;
+
+	/* AutoNegotiate completed */
+	autoadv = mdio_read(net_dev, phy_addr, MII_ANADV);
+	autorec = mdio_read(net_dev, phy_addr, MII_ANLPAR);
+	status = autoadv & autorec;
+
+	*speed = HW_SPEED_10_MBPS;
+	*duplex = FDX_CAPABLE_HALF_SELECTED;
+
+	if (status & (MII_NWAY_TX | MII_NWAY_TX_FDX))
+		*speed = HW_SPEED_100_MBPS;
+	if (status & ( MII_NWAY_TX_FDX | MII_NWAY_T_FDX))
+		*duplex = FDX_CAPABLE_FULL_SELECTED;
+
+	sis_priv->autong_complete = 1;
+
+	/* Workaround for Realtek RTL8201 PHY issue */
+	if ((phy->phy_id0 == 0x0000) && ((phy->phy_id1 & 0xFFF0) == 0x8200)) {
+		if (mdio_read(net_dev, phy_addr, MII_CONTROL) & MII_CNTL_FDX)
+			*duplex = FDX_CAPABLE_FULL_SELECTED;
+		if (mdio_read(net_dev, phy_addr, 0x0019) & 0x01)
+			*speed = HW_SPEED_100_MBPS;
+	}
+
+	if(netif_msg_link(sis_priv))
+		printk(KERN_INFO "%s: Media Link On %s %s-duplex\n",
+	       				net_dev->name,
+	       				*speed == HW_SPEED_100_MBPS ?
+	       					"100mbps" : "10mbps",
+	       				*duplex == FDX_CAPABLE_FULL_SELECTED ?
+	       					"full" : "half");
+}
+
+/**
+ *	sis900_tx_timeout - sis900 transmit timeout routine
+ *	@net_dev: the net device to transmit
+ *
+ *	print transmit timeout status
+ *	disable interrupts and do some tasks
+ */
+
+static void sis900_tx_timeout(struct net_device *net_dev)
+{
+	struct sis900_private *sis_priv = netdev_priv(net_dev);
+	long ioaddr = net_dev->base_addr;
+	unsigned long flags;
+	int i;
+
+	if(netif_msg_tx_err(sis_priv))
+		printk(KERN_INFO "%s: Transmit timeout, status %8.8x %8.8x\n",
+	       		net_dev->name, inl(ioaddr + cr), inl(ioaddr + isr));
+
+	/* Disable interrupts by clearing the interrupt mask. */
+	outl(0x0000, ioaddr + imr);
+
+	/* use spinlock to prevent interrupt handler accessing buffer ring */
+	spin_lock_irqsave(&sis_priv->lock, flags);
+
+	/* discard unsent packets */
+	sis_priv->dirty_tx = sis_priv->cur_tx = 0;
+	for (i = 0; i < NUM_TX_DESC; i++) {
+		struct sk_buff *skb = sis_priv->tx_skbuff[i];
+
+		if (skb) {
+			pci_unmap_single(sis_priv->pci_dev,
+				sis_priv->tx_ring[i].bufptr, skb->len,
+				PCI_DMA_TODEVICE);
+			dev_kfree_skb_irq(skb);
+			sis_priv->tx_skbuff[i] = NULL;
+			sis_priv->tx_ring[i].cmdsts = 0;
+			sis_priv->tx_ring[i].bufptr = 0;
+			net_dev->stats.tx_dropped++;
+		}
+	}
+	sis_priv->tx_full = 0;
+	netif_wake_queue(net_dev);
+
+	spin_unlock_irqrestore(&sis_priv->lock, flags);
+
+	net_dev->trans_start = jiffies; /* prevent tx timeout */
+
+	/* load Transmit Descriptor Register */
+	outl(sis_priv->tx_ring_dma, ioaddr + txdp);
+
+	/* Enable all known interrupts by setting the interrupt mask. */
+	outl((RxSOVR|RxORN|RxERR|RxOK|TxURN|TxERR|TxIDLE), ioaddr + imr);
+}
+
+/**
+ *	sis900_start_xmit - sis900 start transmit routine
+ *	@skb: socket buffer pointer to put the data being transmitted
+ *	@net_dev: the net device to transmit with
+ *
+ *	Set the transmit buffer descriptor,
+ *	and write TxENA to enable transmit state machine.
+ *	tell upper layer if the buffer is full
+ */
+
+static netdev_tx_t
+sis900_start_xmit(struct sk_buff *skb, struct net_device *net_dev)
+{
+	struct sis900_private *sis_priv = netdev_priv(net_dev);
+	long ioaddr = net_dev->base_addr;
+	unsigned int  entry;
+	unsigned long flags;
+	unsigned int  index_cur_tx, index_dirty_tx;
+	unsigned int  count_dirty_tx;
+
+	/* Don't transmit data before the complete of auto-negotiation */
+	if(!sis_priv->autong_complete){
+		netif_stop_queue(net_dev);
+		return NETDEV_TX_BUSY;
+	}
+
+	spin_lock_irqsave(&sis_priv->lock, flags);
+
+	/* Calculate the next Tx descriptor entry. */
+	entry = sis_priv->cur_tx % NUM_TX_DESC;
+	sis_priv->tx_skbuff[entry] = skb;
+
+	/* set the transmit buffer descriptor and enable Transmit State Machine */
+	sis_priv->tx_ring[entry].bufptr = pci_map_single(sis_priv->pci_dev,
+		skb->data, skb->len, PCI_DMA_TODEVICE);
+	sis_priv->tx_ring[entry].cmdsts = (OWN | skb->len);
+	outl(TxENA | inl(ioaddr + cr), ioaddr + cr);
+
+	sis_priv->cur_tx ++;
+	index_cur_tx = sis_priv->cur_tx;
+	index_dirty_tx = sis_priv->dirty_tx;
+
+	for (count_dirty_tx = 0; index_cur_tx != index_dirty_tx; index_dirty_tx++)
+		count_dirty_tx ++;
+
+	if (index_cur_tx == index_dirty_tx) {
+		/* dirty_tx is met in the cycle of cur_tx, buffer full */
+		sis_priv->tx_full = 1;
+		netif_stop_queue(net_dev);
+	} else if (count_dirty_tx < NUM_TX_DESC) {
+		/* Typical path, tell upper layer that more transmission is possible */
+		netif_start_queue(net_dev);
+	} else {
+		/* buffer full, tell upper layer no more transmission */
+		sis_priv->tx_full = 1;
+		netif_stop_queue(net_dev);
+	}
+
+	spin_unlock_irqrestore(&sis_priv->lock, flags);
+
+	if (netif_msg_tx_queued(sis_priv))
+		printk(KERN_DEBUG "%s: Queued Tx packet at %p size %d "
+		       "to slot %d.\n",
+		       net_dev->name, skb->data, (int)skb->len, entry);
+
+	return NETDEV_TX_OK;
+}
+
+/**
+ *	sis900_interrupt - sis900 interrupt handler
+ *	@irq: the irq number
+ *	@dev_instance: the client data object
+ *
+ *	The interrupt handler does all of the Rx thread work,
+ *	and cleans up after the Tx thread
+ */
+
+static irqreturn_t sis900_interrupt(int irq, void *dev_instance)
+{
+	struct net_device *net_dev = dev_instance;
+	struct sis900_private *sis_priv = netdev_priv(net_dev);
+	int boguscnt = max_interrupt_work;
+	long ioaddr = net_dev->base_addr;
+	u32 status;
+	unsigned int handled = 0;
+
+	spin_lock (&sis_priv->lock);
+
+	do {
+		status = inl(ioaddr + isr);
+
+		if ((status & (HIBERR|TxURN|TxERR|TxIDLE|RxORN|RxERR|RxOK)) == 0)
+			/* nothing intresting happened */
+			break;
+		handled = 1;
+
+		/* why dow't we break after Tx/Rx case ?? keyword: full-duplex */
+		if (status & (RxORN | RxERR | RxOK))
+			/* Rx interrupt */
+			sis900_rx(net_dev);
+
+		if (status & (TxURN | TxERR | TxIDLE))
+			/* Tx interrupt */
+			sis900_finish_xmit(net_dev);
+
+		/* something strange happened !!! */
+		if (status & HIBERR) {
+			if(netif_msg_intr(sis_priv))
+				printk(KERN_INFO "%s: Abnormal interrupt, "
+					"status %#8.8x.\n", net_dev->name, status);
+			break;
+		}
+		if (--boguscnt < 0) {
+			if(netif_msg_intr(sis_priv))
+				printk(KERN_INFO "%s: Too much work at interrupt, "
+					"interrupt status = %#8.8x.\n",
+					net_dev->name, status);
+			break;
+		}
+	} while (1);
+
+	if(netif_msg_intr(sis_priv))
+		printk(KERN_DEBUG "%s: exiting interrupt, "
+		       "interrupt status = 0x%#8.8x.\n",
+		       net_dev->name, inl(ioaddr + isr));
+
+	spin_unlock (&sis_priv->lock);
+	return IRQ_RETVAL(handled);
+}
+
+/**
+ *	sis900_rx - sis900 receive routine
+ *	@net_dev: the net device which receives data
+ *
+ *	Process receive interrupt events,
+ *	put buffer to higher layer and refill buffer pool
+ *	Note: This function is called by interrupt handler,
+ *	don't do "too much" work here
+ */
+
+static int sis900_rx(struct net_device *net_dev)
+{
+	struct sis900_private *sis_priv = netdev_priv(net_dev);
+	long ioaddr = net_dev->base_addr;
+	unsigned int entry = sis_priv->cur_rx % NUM_RX_DESC;
+	u32 rx_status = sis_priv->rx_ring[entry].cmdsts;
+	int rx_work_limit;
+
+	if (netif_msg_rx_status(sis_priv))
+		printk(KERN_DEBUG "sis900_rx, cur_rx:%4.4d, dirty_rx:%4.4d "
+		       "status:0x%8.8x\n",
+		       sis_priv->cur_rx, sis_priv->dirty_rx, rx_status);
+	rx_work_limit = sis_priv->dirty_rx + NUM_RX_DESC - sis_priv->cur_rx;
+
+	while (rx_status & OWN) {
+		unsigned int rx_size;
+		unsigned int data_size;
+
+		if (--rx_work_limit < 0)
+			break;
+
+		data_size = rx_status & DSIZE;
+		rx_size = data_size - CRC_SIZE;
+
+#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
+		/* ``TOOLONG'' flag means jumbo packet received. */
+		if ((rx_status & TOOLONG) && data_size <= MAX_FRAME_SIZE)
+			rx_status &= (~ ((unsigned int)TOOLONG));
+#endif
+
+		if (rx_status & (ABORT|OVERRUN|TOOLONG|RUNT|RXISERR|CRCERR|FAERR)) {
+			/* corrupted packet received */
+			if (netif_msg_rx_err(sis_priv))
+				printk(KERN_DEBUG "%s: Corrupted packet "
+				       "received, buffer status = 0x%8.8x/%d.\n",
+				       net_dev->name, rx_status, data_size);
+			net_dev->stats.rx_errors++;
+			if (rx_status & OVERRUN)
+				net_dev->stats.rx_over_errors++;
+			if (rx_status & (TOOLONG|RUNT))
+				net_dev->stats.rx_length_errors++;
+			if (rx_status & (RXISERR | FAERR))
+				net_dev->stats.rx_frame_errors++;
+			if (rx_status & CRCERR)
+				net_dev->stats.rx_crc_errors++;
+			/* reset buffer descriptor state */
+			sis_priv->rx_ring[entry].cmdsts = RX_BUF_SIZE;
+		} else {
+			struct sk_buff * skb;
+			struct sk_buff * rx_skb;
+
+			pci_unmap_single(sis_priv->pci_dev,
+				sis_priv->rx_ring[entry].bufptr, RX_BUF_SIZE,
+				PCI_DMA_FROMDEVICE);
+
+			/* refill the Rx buffer, what if there is not enough
+			 * memory for new socket buffer ?? */
+			if ((skb = dev_alloc_skb(RX_BUF_SIZE)) == NULL) {
+				/*
+				 * Not enough memory to refill the buffer
+				 * so we need to recycle the old one so
+				 * as to avoid creating a memory hole
+				 * in the rx ring
+				 */
+				skb = sis_priv->rx_skbuff[entry];
+				net_dev->stats.rx_dropped++;
+				goto refill_rx_ring;
+			}
+
+			/* This situation should never happen, but due to
+			   some unknown bugs, it is possible that
+			   we are working on NULL sk_buff :-( */
+			if (sis_priv->rx_skbuff[entry] == NULL) {
+				if (netif_msg_rx_err(sis_priv))
+					printk(KERN_WARNING "%s: NULL pointer "
+					      "encountered in Rx ring\n"
+					      "cur_rx:%4.4d, dirty_rx:%4.4d\n",
+					      net_dev->name, sis_priv->cur_rx,
+					      sis_priv->dirty_rx);
+				dev_kfree_skb(skb);
+				break;
+			}
+
+			/* give the socket buffer to upper layers */
+			rx_skb = sis_priv->rx_skbuff[entry];
+			skb_put(rx_skb, rx_size);
+			rx_skb->protocol = eth_type_trans(rx_skb, net_dev);
+			netif_rx(rx_skb);
+
+			/* some network statistics */
+			if ((rx_status & BCAST) == MCAST)
+				net_dev->stats.multicast++;
+			net_dev->stats.rx_bytes += rx_size;
+			net_dev->stats.rx_packets++;
+			sis_priv->dirty_rx++;
+refill_rx_ring:
+			sis_priv->rx_skbuff[entry] = skb;
+			sis_priv->rx_ring[entry].cmdsts = RX_BUF_SIZE;
+                	sis_priv->rx_ring[entry].bufptr =
+				pci_map_single(sis_priv->pci_dev, skb->data,
+					RX_BUF_SIZE, PCI_DMA_FROMDEVICE);
+		}
+		sis_priv->cur_rx++;
+		entry = sis_priv->cur_rx % NUM_RX_DESC;
+		rx_status = sis_priv->rx_ring[entry].cmdsts;
+	} // while
+
+	/* refill the Rx buffer, what if the rate of refilling is slower
+	 * than consuming ?? */
+	for (; sis_priv->cur_rx != sis_priv->dirty_rx; sis_priv->dirty_rx++) {
+		struct sk_buff *skb;
+
+		entry = sis_priv->dirty_rx % NUM_RX_DESC;
+
+		if (sis_priv->rx_skbuff[entry] == NULL) {
+			if ((skb = dev_alloc_skb(RX_BUF_SIZE)) == NULL) {
+				/* not enough memory for skbuff, this makes a
+				 * "hole" on the buffer ring, it is not clear
+				 * how the hardware will react to this kind
+				 * of degenerated buffer */
+				if (netif_msg_rx_err(sis_priv))
+					printk(KERN_INFO "%s: Memory squeeze, "
+						"deferring packet.\n",
+						net_dev->name);
+				net_dev->stats.rx_dropped++;
+				break;
+			}
+			sis_priv->rx_skbuff[entry] = skb;
+			sis_priv->rx_ring[entry].cmdsts = RX_BUF_SIZE;
+                	sis_priv->rx_ring[entry].bufptr =
+				pci_map_single(sis_priv->pci_dev, skb->data,
+					RX_BUF_SIZE, PCI_DMA_FROMDEVICE);
+		}
+	}
+	/* re-enable the potentially idle receive state matchine */
+	outl(RxENA | inl(ioaddr + cr), ioaddr + cr );
+
+	return 0;
+}
+
+/**
+ *	sis900_finish_xmit - finish up transmission of packets
+ *	@net_dev: the net device to be transmitted on
+ *
+ *	Check for error condition and free socket buffer etc
+ *	schedule for more transmission as needed
+ *	Note: This function is called by interrupt handler,
+ *	don't do "too much" work here
+ */
+
+static void sis900_finish_xmit (struct net_device *net_dev)
+{
+	struct sis900_private *sis_priv = netdev_priv(net_dev);
+
+	for (; sis_priv->dirty_tx != sis_priv->cur_tx; sis_priv->dirty_tx++) {
+		struct sk_buff *skb;
+		unsigned int entry;
+		u32 tx_status;
+
+		entry = sis_priv->dirty_tx % NUM_TX_DESC;
+		tx_status = sis_priv->tx_ring[entry].cmdsts;
+
+		if (tx_status & OWN) {
+			/* The packet is not transmitted yet (owned by hardware) !
+			 * Note: the interrupt is generated only when Tx Machine
+			 * is idle, so this is an almost impossible case */
+			break;
+		}
+
+		if (tx_status & (ABORT | UNDERRUN | OWCOLL)) {
+			/* packet unsuccessfully transmitted */
+			if (netif_msg_tx_err(sis_priv))
+				printk(KERN_DEBUG "%s: Transmit "
+				       "error, Tx status %8.8x.\n",
+				       net_dev->name, tx_status);
+			net_dev->stats.tx_errors++;
+			if (tx_status & UNDERRUN)
+				net_dev->stats.tx_fifo_errors++;
+			if (tx_status & ABORT)
+				net_dev->stats.tx_aborted_errors++;
+			if (tx_status & NOCARRIER)
+				net_dev->stats.tx_carrier_errors++;
+			if (tx_status & OWCOLL)
+				net_dev->stats.tx_window_errors++;
+		} else {
+			/* packet successfully transmitted */
+			net_dev->stats.collisions += (tx_status & COLCNT) >> 16;
+			net_dev->stats.tx_bytes += tx_status & DSIZE;
+			net_dev->stats.tx_packets++;
+		}
+		/* Free the original skb. */
+		skb = sis_priv->tx_skbuff[entry];
+		pci_unmap_single(sis_priv->pci_dev,
+			sis_priv->tx_ring[entry].bufptr, skb->len,
+			PCI_DMA_TODEVICE);
+		dev_kfree_skb_irq(skb);
+		sis_priv->tx_skbuff[entry] = NULL;
+		sis_priv->tx_ring[entry].bufptr = 0;
+		sis_priv->tx_ring[entry].cmdsts = 0;
+	}
+
+	if (sis_priv->tx_full && netif_queue_stopped(net_dev) &&
+	    sis_priv->cur_tx - sis_priv->dirty_tx < NUM_TX_DESC - 4) {
+		/* The ring is no longer full, clear tx_full and schedule
+		 * more transmission by netif_wake_queue(net_dev) */
+		sis_priv->tx_full = 0;
+		netif_wake_queue (net_dev);
+	}
+}
+
+/**
+ *	sis900_close - close sis900 device
+ *	@net_dev: the net device to be closed
+ *
+ *	Disable interrupts, stop the Tx and Rx Status Machine
+ *	free Tx and RX socket buffer
+ */
+
+static int sis900_close(struct net_device *net_dev)
+{
+	long ioaddr = net_dev->base_addr;
+	struct sis900_private *sis_priv = netdev_priv(net_dev);
+	struct sk_buff *skb;
+	int i;
+
+	netif_stop_queue(net_dev);
+
+	/* Disable interrupts by clearing the interrupt mask. */
+	outl(0x0000, ioaddr + imr);
+	outl(0x0000, ioaddr + ier);
+
+	/* Stop the chip's Tx and Rx Status Machine */
+	outl(RxDIS | TxDIS | inl(ioaddr + cr), ioaddr + cr);
+
+	del_timer(&sis_priv->timer);
+
+	free_irq(net_dev->irq, net_dev);
+
+	/* Free Tx and RX skbuff */
+	for (i = 0; i < NUM_RX_DESC; i++) {
+		skb = sis_priv->rx_skbuff[i];
+		if (skb) {
+			pci_unmap_single(sis_priv->pci_dev,
+				sis_priv->rx_ring[i].bufptr,
+				RX_BUF_SIZE, PCI_DMA_FROMDEVICE);
+			dev_kfree_skb(skb);
+			sis_priv->rx_skbuff[i] = NULL;
+		}
+	}
+	for (i = 0; i < NUM_TX_DESC; i++) {
+		skb = sis_priv->tx_skbuff[i];
+		if (skb) {
+			pci_unmap_single(sis_priv->pci_dev,
+				sis_priv->tx_ring[i].bufptr, skb->len,
+				PCI_DMA_TODEVICE);
+			dev_kfree_skb(skb);
+			sis_priv->tx_skbuff[i] = NULL;
+		}
+	}
+
+	/* Green! Put the chip in low-power mode. */
+
+	return 0;
+}
+
+/**
+ *	sis900_get_drvinfo - Return information about driver
+ *	@net_dev: the net device to probe
+ *	@info: container for info returned
+ *
+ *	Process ethtool command such as "ehtool -i" to show information
+ */
+
+static void sis900_get_drvinfo(struct net_device *net_dev,
+			       struct ethtool_drvinfo *info)
+{
+	struct sis900_private *sis_priv = netdev_priv(net_dev);
+
+	strcpy (info->driver, SIS900_MODULE_NAME);
+	strcpy (info->version, SIS900_DRV_VERSION);
+	strcpy (info->bus_info, pci_name(sis_priv->pci_dev));
+}
+
+static u32 sis900_get_msglevel(struct net_device *net_dev)
+{
+	struct sis900_private *sis_priv = netdev_priv(net_dev);
+	return sis_priv->msg_enable;
+}
+
+static void sis900_set_msglevel(struct net_device *net_dev, u32 value)
+{
+	struct sis900_private *sis_priv = netdev_priv(net_dev);
+	sis_priv->msg_enable = value;
+}
+
+static u32 sis900_get_link(struct net_device *net_dev)
+{
+	struct sis900_private *sis_priv = netdev_priv(net_dev);
+	return mii_link_ok(&sis_priv->mii_info);
+}
+
+static int sis900_get_settings(struct net_device *net_dev,
+				struct ethtool_cmd *cmd)
+{
+	struct sis900_private *sis_priv = netdev_priv(net_dev);
+	spin_lock_irq(&sis_priv->lock);
+	mii_ethtool_gset(&sis_priv->mii_info, cmd);
+	spin_unlock_irq(&sis_priv->lock);
+	return 0;
+}
+
+static int sis900_set_settings(struct net_device *net_dev,
+				struct ethtool_cmd *cmd)
+{
+	struct sis900_private *sis_priv = netdev_priv(net_dev);
+	int rt;
+	spin_lock_irq(&sis_priv->lock);
+	rt = mii_ethtool_sset(&sis_priv->mii_info, cmd);
+	spin_unlock_irq(&sis_priv->lock);
+	return rt;
+}
+
+static int sis900_nway_reset(struct net_device *net_dev)
+{
+	struct sis900_private *sis_priv = netdev_priv(net_dev);
+	return mii_nway_restart(&sis_priv->mii_info);
+}
+
+/**
+ *	sis900_set_wol - Set up Wake on Lan registers
+ *	@net_dev: the net device to probe
+ *	@wol: container for info passed to the driver
+ *
+ *	Process ethtool command "wol" to setup wake on lan features.
+ *	SiS900 supports sending WoL events if a correct packet is received,
+ *	but there is no simple way to filter them to only a subset (broadcast,
+ *	multicast, unicast or arp).
+ */
+
+static int sis900_set_wol(struct net_device *net_dev, struct ethtool_wolinfo *wol)
+{
+	struct sis900_private *sis_priv = netdev_priv(net_dev);
+	long pmctrl_addr = net_dev->base_addr + pmctrl;
+	u32 cfgpmcsr = 0, pmctrl_bits = 0;
+
+	if (wol->wolopts == 0) {
+		pci_read_config_dword(sis_priv->pci_dev, CFGPMCSR, &cfgpmcsr);
+		cfgpmcsr &= ~PME_EN;
+		pci_write_config_dword(sis_priv->pci_dev, CFGPMCSR, cfgpmcsr);
+		outl(pmctrl_bits, pmctrl_addr);
+		if (netif_msg_wol(sis_priv))
+			printk(KERN_DEBUG "%s: Wake on LAN disabled\n", net_dev->name);
+		return 0;
+	}
+
+	if (wol->wolopts & (WAKE_MAGICSECURE | WAKE_UCAST | WAKE_MCAST
+				| WAKE_BCAST | WAKE_ARP))
+		return -EINVAL;
+
+	if (wol->wolopts & WAKE_MAGIC)
+		pmctrl_bits |= MAGICPKT;
+	if (wol->wolopts & WAKE_PHY)
+		pmctrl_bits |= LINKON;
+
+	outl(pmctrl_bits, pmctrl_addr);
+
+	pci_read_config_dword(sis_priv->pci_dev, CFGPMCSR, &cfgpmcsr);
+	cfgpmcsr |= PME_EN;
+	pci_write_config_dword(sis_priv->pci_dev, CFGPMCSR, cfgpmcsr);
+	if (netif_msg_wol(sis_priv))
+		printk(KERN_DEBUG "%s: Wake on LAN enabled\n", net_dev->name);
+
+	return 0;
+}
+
+static void sis900_get_wol(struct net_device *net_dev, struct ethtool_wolinfo *wol)
+{
+	long pmctrl_addr = net_dev->base_addr + pmctrl;
+	u32 pmctrl_bits;
+
+	pmctrl_bits = inl(pmctrl_addr);
+	if (pmctrl_bits & MAGICPKT)
+		wol->wolopts |= WAKE_MAGIC;
+	if (pmctrl_bits & LINKON)
+		wol->wolopts |= WAKE_PHY;
+
+	wol->supported = (WAKE_PHY | WAKE_MAGIC);
+}
+
+static const struct ethtool_ops sis900_ethtool_ops = {
+	.get_drvinfo 	= sis900_get_drvinfo,
+	.get_msglevel	= sis900_get_msglevel,
+	.set_msglevel	= sis900_set_msglevel,
+	.get_link	= sis900_get_link,
+	.get_settings	= sis900_get_settings,
+	.set_settings	= sis900_set_settings,
+	.nway_reset	= sis900_nway_reset,
+	.get_wol	= sis900_get_wol,
+	.set_wol	= sis900_set_wol
+};
+
+/**
+ *	mii_ioctl - process MII i/o control command
+ *	@net_dev: the net device to command for
+ *	@rq: parameter for command
+ *	@cmd: the i/o command
+ *
+ *	Process MII command like read/write MII register
+ */
+
+static int mii_ioctl(struct net_device *net_dev, struct ifreq *rq, int cmd)
+{
+	struct sis900_private *sis_priv = netdev_priv(net_dev);
+	struct mii_ioctl_data *data = if_mii(rq);
+
+	switch(cmd) {
+	case SIOCGMIIPHY:		/* Get address of MII PHY in use. */
+		data->phy_id = sis_priv->mii->phy_addr;
+		/* Fall Through */
+
+	case SIOCGMIIREG:		/* Read MII PHY register. */
+		data->val_out = mdio_read(net_dev, data->phy_id & 0x1f, data->reg_num & 0x1f);
+		return 0;
+
+	case SIOCSMIIREG:		/* Write MII PHY register. */
+		mdio_write(net_dev, data->phy_id & 0x1f, data->reg_num & 0x1f, data->val_in);
+		return 0;
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+/**
+ *	sis900_set_config - Set media type by net_device.set_config
+ *	@dev: the net device for media type change
+ *	@map: ifmap passed by ifconfig
+ *
+ *	Set media type to 10baseT, 100baseT or 0(for auto) by ifconfig
+ *	we support only port changes. All other runtime configuration
+ *	changes will be ignored
+ */
+
+static int sis900_set_config(struct net_device *dev, struct ifmap *map)
+{
+	struct sis900_private *sis_priv = netdev_priv(dev);
+	struct mii_phy *mii_phy = sis_priv->mii;
+
+	u16 status;
+
+	if ((map->port != (u_char)(-1)) && (map->port != dev->if_port)) {
+		/* we switch on the ifmap->port field. I couldn't find anything
+		 * like a definition or standard for the values of that field.
+		 * I think the meaning of those values is device specific. But
+		 * since I would like to change the media type via the ifconfig
+		 * command I use the definition from linux/netdevice.h
+		 * (which seems to be different from the ifport(pcmcia) definition) */
+		switch(map->port){
+		case IF_PORT_UNKNOWN: /* use auto here */
+			dev->if_port = map->port;
+			/* we are going to change the media type, so the Link
+			 * will be temporary down and we need to reflect that
+			 * here. When the Link comes up again, it will be
+			 * sensed by the sis_timer procedure, which also does
+			 * all the rest for us */
+			netif_carrier_off(dev);
+
+			/* read current state */
+			status = mdio_read(dev, mii_phy->phy_addr, MII_CONTROL);
+
+			/* enable auto negotiation and reset the negotioation
+			 * (I don't really know what the auto negatiotiation
+			 * reset really means, but it sounds for me right to
+			 * do one here) */
+			mdio_write(dev, mii_phy->phy_addr,
+				   MII_CONTROL, status | MII_CNTL_AUTO | MII_CNTL_RST_AUTO);
+
+			break;
+
+		case IF_PORT_10BASET: /* 10BaseT */
+			dev->if_port = map->port;
+
+			/* we are going to change the media type, so the Link
+			 * will be temporary down and we need to reflect that
+			 * here. When the Link comes up again, it will be
+			 * sensed by the sis_timer procedure, which also does
+			 * all the rest for us */
+			netif_carrier_off(dev);
+
+			/* set Speed to 10Mbps */
+			/* read current state */
+			status = mdio_read(dev, mii_phy->phy_addr, MII_CONTROL);
+
+			/* disable auto negotiation and force 10MBit mode*/
+			mdio_write(dev, mii_phy->phy_addr,
+				   MII_CONTROL, status & ~(MII_CNTL_SPEED |
+					MII_CNTL_AUTO));
+			break;
+
+		case IF_PORT_100BASET: /* 100BaseT */
+		case IF_PORT_100BASETX: /* 100BaseTx */
+			dev->if_port = map->port;
+
+			/* we are going to change the media type, so the Link
+			 * will be temporary down and we need to reflect that
+			 * here. When the Link comes up again, it will be
+			 * sensed by the sis_timer procedure, which also does
+			 * all the rest for us */
+			netif_carrier_off(dev);
+
+			/* set Speed to 100Mbps */
+			/* disable auto negotiation and enable 100MBit Mode */
+			status = mdio_read(dev, mii_phy->phy_addr, MII_CONTROL);
+			mdio_write(dev, mii_phy->phy_addr,
+				   MII_CONTROL, (status & ~MII_CNTL_SPEED) |
+				   MII_CNTL_SPEED);
+
+			break;
+
+		case IF_PORT_10BASE2: /* 10Base2 */
+		case IF_PORT_AUI: /* AUI */
+		case IF_PORT_100BASEFX: /* 100BaseFx */
+                	/* These Modes are not supported (are they?)*/
+			return -EOPNOTSUPP;
+			break;
+
+		default:
+			return -EINVAL;
+		}
+	}
+	return 0;
+}
+
+/**
+ *	sis900_mcast_bitnr - compute hashtable index
+ *	@addr: multicast address
+ *	@revision: revision id of chip
+ *
+ *	SiS 900 uses the most sigificant 7 bits to index a 128 bits multicast
+ *	hash table, which makes this function a little bit different from other drivers
+ *	SiS 900 B0 & 635 M/B uses the most significat 8 bits to index 256 bits
+ *   	multicast hash table.
+ */
+
+static inline u16 sis900_mcast_bitnr(u8 *addr, u8 revision)
+{
+
+	u32 crc = ether_crc(6, addr);
+
+	/* leave 8 or 7 most siginifant bits */
+	if ((revision >= SIS635A_900_REV) || (revision == SIS900B_900_REV))
+		return (int)(crc >> 24);
+	else
+		return (int)(crc >> 25);
+}
+
+/**
+ *	set_rx_mode - Set SiS900 receive mode
+ *	@net_dev: the net device to be set
+ *
+ *	Set SiS900 receive mode for promiscuous, multicast, or broadcast mode.
+ *	And set the appropriate multicast filter.
+ *	Multicast hash table changes from 128 to 256 bits for 635M/B & 900B0.
+ */
+
+static void set_rx_mode(struct net_device *net_dev)
+{
+	long ioaddr = net_dev->base_addr;
+	struct sis900_private *sis_priv = netdev_priv(net_dev);
+	u16 mc_filter[16] = {0};	/* 256/128 bits multicast hash table */
+	int i, table_entries;
+	u32 rx_mode;
+
+	/* 635 Hash Table entries = 256(2^16) */
+	if((sis_priv->chipset_rev >= SIS635A_900_REV) ||
+			(sis_priv->chipset_rev == SIS900B_900_REV))
+		table_entries = 16;
+	else
+		table_entries = 8;
+
+	if (net_dev->flags & IFF_PROMISC) {
+		/* Accept any kinds of packets */
+		rx_mode = RFPromiscuous;
+		for (i = 0; i < table_entries; i++)
+			mc_filter[i] = 0xffff;
+	} else if ((netdev_mc_count(net_dev) > multicast_filter_limit) ||
+		   (net_dev->flags & IFF_ALLMULTI)) {
+		/* too many multicast addresses or accept all multicast packet */
+		rx_mode = RFAAB | RFAAM;
+		for (i = 0; i < table_entries; i++)
+			mc_filter[i] = 0xffff;
+	} else {
+		/* Accept Broadcast packet, destination address matchs our
+		 * MAC address, use Receive Filter to reject unwanted MCAST
+		 * packets */
+		struct netdev_hw_addr *ha;
+		rx_mode = RFAAB;
+
+		netdev_for_each_mc_addr(ha, net_dev) {
+			unsigned int bit_nr;
+
+			bit_nr = sis900_mcast_bitnr(ha->addr,
+						    sis_priv->chipset_rev);
+			mc_filter[bit_nr >> 4] |= (1 << (bit_nr & 0xf));
+		}
+	}
+
+	/* update Multicast Hash Table in Receive Filter */
+	for (i = 0; i < table_entries; i++) {
+                /* why plus 0x04 ??, That makes the correct value for hash table. */
+		outl((u32)(0x00000004+i) << RFADDR_shift, ioaddr + rfcr);
+		outl(mc_filter[i], ioaddr + rfdr);
+	}
+
+	outl(RFEN | rx_mode, ioaddr + rfcr);
+
+	/* sis900 is capable of looping back packets at MAC level for
+	 * debugging purpose */
+	if (net_dev->flags & IFF_LOOPBACK) {
+		u32 cr_saved;
+		/* We must disable Tx/Rx before setting loopback mode */
+		cr_saved = inl(ioaddr + cr);
+		outl(cr_saved | TxDIS | RxDIS, ioaddr + cr);
+		/* enable loopback */
+		outl(inl(ioaddr + txcfg) | TxMLB, ioaddr + txcfg);
+		outl(inl(ioaddr + rxcfg) | RxATX, ioaddr + rxcfg);
+		/* restore cr */
+		outl(cr_saved, ioaddr + cr);
+	}
+}
+
+/**
+ *	sis900_reset - Reset sis900 MAC
+ *	@net_dev: the net device to reset
+ *
+ *	reset sis900 MAC and wait until finished
+ *	reset through command register
+ *	change backoff algorithm for 900B0 & 635 M/B
+ */
+
+static void sis900_reset(struct net_device *net_dev)
+{
+	struct sis900_private *sis_priv = netdev_priv(net_dev);
+	long ioaddr = net_dev->base_addr;
+	int i = 0;
+	u32 status = TxRCMP | RxRCMP;
+
+	outl(0, ioaddr + ier);
+	outl(0, ioaddr + imr);
+	outl(0, ioaddr + rfcr);
+
+	outl(RxRESET | TxRESET | RESET | inl(ioaddr + cr), ioaddr + cr);
+
+	/* Check that the chip has finished the reset. */
+	while (status && (i++ < 1000)) {
+		status ^= (inl(isr + ioaddr) & status);
+	}
+
+	if( (sis_priv->chipset_rev >= SIS635A_900_REV) ||
+			(sis_priv->chipset_rev == SIS900B_900_REV) )
+		outl(PESEL | RND_CNT, ioaddr + cfg);
+	else
+		outl(PESEL, ioaddr + cfg);
+}
+
+/**
+ *	sis900_remove - Remove sis900 device
+ *	@pci_dev: the pci device to be removed
+ *
+ *	remove and release SiS900 net device
+ */
+
+static void __devexit sis900_remove(struct pci_dev *pci_dev)
+{
+	struct net_device *net_dev = pci_get_drvdata(pci_dev);
+	struct sis900_private *sis_priv = netdev_priv(net_dev);
+	struct mii_phy *phy = NULL;
+
+	while (sis_priv->first_mii) {
+		phy = sis_priv->first_mii;
+		sis_priv->first_mii = phy->next;
+		kfree(phy);
+	}
+
+	pci_free_consistent(pci_dev, RX_TOTAL_SIZE, sis_priv->rx_ring,
+		sis_priv->rx_ring_dma);
+	pci_free_consistent(pci_dev, TX_TOTAL_SIZE, sis_priv->tx_ring,
+		sis_priv->tx_ring_dma);
+	unregister_netdev(net_dev);
+	free_netdev(net_dev);
+	pci_release_regions(pci_dev);
+	pci_set_drvdata(pci_dev, NULL);
+}
+
+#ifdef CONFIG_PM
+
+static int sis900_suspend(struct pci_dev *pci_dev, pm_message_t state)
+{
+	struct net_device *net_dev = pci_get_drvdata(pci_dev);
+	long ioaddr = net_dev->base_addr;
+
+	if(!netif_running(net_dev))
+		return 0;
+
+	netif_stop_queue(net_dev);
+	netif_device_detach(net_dev);
+
+	/* Stop the chip's Tx and Rx Status Machine */
+	outl(RxDIS | TxDIS | inl(ioaddr + cr), ioaddr + cr);
+
+	pci_set_power_state(pci_dev, PCI_D3hot);
+	pci_save_state(pci_dev);
+
+	return 0;
+}
+
+static int sis900_resume(struct pci_dev *pci_dev)
+{
+	struct net_device *net_dev = pci_get_drvdata(pci_dev);
+	struct sis900_private *sis_priv = netdev_priv(net_dev);
+	long ioaddr = net_dev->base_addr;
+
+	if(!netif_running(net_dev))
+		return 0;
+	pci_restore_state(pci_dev);
+	pci_set_power_state(pci_dev, PCI_D0);
+
+	sis900_init_rxfilter(net_dev);
+
+	sis900_init_tx_ring(net_dev);
+	sis900_init_rx_ring(net_dev);
+
+	set_rx_mode(net_dev);
+
+	netif_device_attach(net_dev);
+	netif_start_queue(net_dev);
+
+	/* Workaround for EDB */
+	sis900_set_mode(ioaddr, HW_SPEED_10_MBPS, FDX_CAPABLE_HALF_SELECTED);
+
+	/* Enable all known interrupts by setting the interrupt mask. */
+	outl((RxSOVR|RxORN|RxERR|RxOK|TxURN|TxERR|TxIDLE), ioaddr + imr);
+	outl(RxENA | inl(ioaddr + cr), ioaddr + cr);
+	outl(IE, ioaddr + ier);
+
+	sis900_check_mode(net_dev, sis_priv->mii);
+
+	return 0;
+}
+#endif /* CONFIG_PM */
+
+static struct pci_driver sis900_pci_driver = {
+	.name		= SIS900_MODULE_NAME,
+	.id_table	= sis900_pci_tbl,
+	.probe		= sis900_probe,
+	.remove		= __devexit_p(sis900_remove),
+#ifdef CONFIG_PM
+	.suspend	= sis900_suspend,
+	.resume		= sis900_resume,
+#endif /* CONFIG_PM */
+};
+
+static int __init sis900_init_module(void)
+{
+/* when a module, this is printed whether or not devices are found in probe */
+#ifdef MODULE
+	printk(version);
+#endif
+
+	return pci_register_driver(&sis900_pci_driver);
+}
+
+static void __exit sis900_cleanup_module(void)
+{
+	pci_unregister_driver(&sis900_pci_driver);
+}
+
+module_init(sis900_init_module);
+module_exit(sis900_cleanup_module);
+
diff --git a/drivers/net/ethernet/sis/sis900.h b/drivers/net/ethernet/sis/sis900.h
new file mode 100644
index 000000000000..150511a922ef
--- /dev/null
+++ b/drivers/net/ethernet/sis/sis900.h
@@ -0,0 +1,329 @@
+/* sis900.h Definitions for SiS ethernet controllers including 7014/7016 and 900
+ * Copyright 1999 Silicon Integrated System Corporation
+ * References:
+ *   SiS 7016 Fast Ethernet PCI Bus 10/100 Mbps LAN Controller with OnNow Support,
+ *	preliminary Rev. 1.0 Jan. 14, 1998
+ *   SiS 900 Fast Ethernet PCI Bus 10/100 Mbps LAN Single Chip with OnNow Support,
+ *	preliminary Rev. 1.0 Nov. 10, 1998
+ *   SiS 7014 Single Chip 100BASE-TX/10BASE-T Physical Layer Solution,
+ *	preliminary Rev. 1.0 Jan. 18, 1998
+ *   http://www.sis.com.tw/support/databook.htm
+ */
+
+/*
+ * SiS 7016 and SiS 900 ethernet controller registers
+ */
+
+/* The I/O extent, SiS 900 needs 256 bytes of io address */
+#define SIS900_TOTAL_SIZE 0x100
+
+/* Symbolic offsets to registers. */
+enum sis900_registers {
+	cr=0x0,                 //Command Register
+	cfg=0x4,                //Configuration Register
+	mear=0x8,               //EEPROM Access Register
+	ptscr=0xc,              //PCI Test Control Register
+	isr=0x10,               //Interrupt Status Register
+	imr=0x14,               //Interrupt Mask Register
+	ier=0x18,               //Interrupt Enable Register
+	epar=0x18,              //Enhanced PHY Access Register
+	txdp=0x20,              //Transmit Descriptor Pointer Register
+        txcfg=0x24,             //Transmit Configuration Register
+        rxdp=0x30,              //Receive Descriptor Pointer Register
+        rxcfg=0x34,             //Receive Configuration Register
+        flctrl=0x38,            //Flow Control Register
+        rxlen=0x3c,             //Receive Packet Length Register
+        rfcr=0x48,              //Receive Filter Control Register
+        rfdr=0x4C,              //Receive Filter Data Register
+        pmctrl=0xB0,            //Power Management Control Register
+        pmer=0xB4               //Power Management Wake-up Event Register
+};
+
+/* Symbolic names for bits in various registers */
+enum sis900_command_register_bits {
+	RELOAD  = 0x00000400, ACCESSMODE = 0x00000200,/* ET */
+	RESET   = 0x00000100, SWI = 0x00000080, RxRESET = 0x00000020,
+	TxRESET = 0x00000010, RxDIS = 0x00000008, RxENA = 0x00000004,
+	TxDIS   = 0x00000002, TxENA = 0x00000001
+};
+
+enum sis900_configuration_register_bits {
+	DESCRFMT = 0x00000100 /* 7016 specific */, REQALG = 0x00000080,
+	SB    = 0x00000040, POW = 0x00000020, EXD = 0x00000010,
+	PESEL = 0x00000008, LPM = 0x00000004, BEM = 0x00000001,
+	/* 635 & 900B Specific */
+	RND_CNT = 0x00000400, FAIR_BACKOFF = 0x00000200,
+	EDB_MASTER_EN = 0x00002000
+};
+
+enum sis900_eeprom_access_reigster_bits {
+	MDC  = 0x00000040, MDDIR = 0x00000020, MDIO = 0x00000010, /* 7016 specific */
+	EECS = 0x00000008, EECLK = 0x00000004, EEDO = 0x00000002,
+	EEDI = 0x00000001
+};
+
+enum sis900_interrupt_register_bits {
+	WKEVT  = 0x10000000, TxPAUSEEND = 0x08000000, TxPAUSE = 0x04000000,
+	TxRCMP = 0x02000000, RxRCMP = 0x01000000, DPERR = 0x00800000,
+	SSERR  = 0x00400000, RMABT  = 0x00200000, RTABT = 0x00100000,
+	RxSOVR = 0x00010000, HIBERR = 0x00008000, SWINT = 0x00001000,
+	MIBINT = 0x00000800, TxURN  = 0x00000400, TxIDLE  = 0x00000200,
+	TxERR  = 0x00000100, TxDESC = 0x00000080, TxOK  = 0x00000040,
+	RxORN  = 0x00000020, RxIDLE = 0x00000010, RxEARLY = 0x00000008,
+	RxERR  = 0x00000004, RxDESC = 0x00000002, RxOK  = 0x00000001
+};
+
+enum sis900_interrupt_enable_reigster_bits {
+	IE = 0x00000001
+};
+
+/* maximum dma burst for transmission and receive */
+#define MAX_DMA_RANGE	7	/* actually 0 means MAXIMUM !! */
+#define TxMXDMA_shift   	20
+#define RxMXDMA_shift    20
+
+enum sis900_tx_rx_dma{
+	DMA_BURST_512 = 0,	DMA_BURST_64 = 5
+};
+
+/* transmit FIFO thresholds */
+#define TX_FILL_THRESH   16	/* 1/4 FIFO size */
+#define TxFILLT_shift   	8
+#define TxDRNT_shift    	0
+#define TxDRNT_100      	48	/* 3/4 FIFO size */
+#define TxDRNT_10		16 	/* 1/2 FIFO size */
+
+enum sis900_transmit_config_register_bits {
+	TxCSI = 0x80000000, TxHBI = 0x40000000, TxMLB = 0x20000000,
+	TxATP = 0x10000000, TxIFG = 0x0C000000, TxFILLT = 0x00003F00,
+	TxDRNT = 0x0000003F
+};
+
+/* recevie FIFO thresholds */
+#define RxDRNT_shift     1
+#define RxDRNT_100	16	/* 1/2 FIFO size */
+#define RxDRNT_10		24 	/* 3/4 FIFO size */
+
+enum sis900_reveive_config_register_bits {
+	RxAEP  = 0x80000000, RxARP = 0x40000000, RxATX = 0x10000000,
+	RxAJAB = 0x08000000, RxDRNT = 0x0000007F
+};
+
+#define RFAA_shift      28
+#define RFADDR_shift    16
+
+enum sis900_receive_filter_control_register_bits {
+	RFEN  = 0x80000000, RFAAB = 0x40000000, RFAAM = 0x20000000,
+	RFAAP = 0x10000000, RFPromiscuous = (RFAAB|RFAAM|RFAAP)
+};
+
+enum sis900_reveive_filter_data_mask {
+	RFDAT =  0x0000FFFF
+};
+
+/* EEPROM Addresses */
+enum sis900_eeprom_address {
+	EEPROMSignature = 0x00, EEPROMVendorID = 0x02, EEPROMDeviceID = 0x03,
+	EEPROMMACAddr   = 0x08, EEPROMChecksum = 0x0b
+};
+
+/* The EEPROM commands include the alway-set leading bit. Refer to NM93Cxx datasheet */
+enum sis900_eeprom_command {
+	EEread     = 0x0180, EEwrite    = 0x0140, EEerase = 0x01C0,
+	EEwriteEnable = 0x0130, EEwriteDisable = 0x0100,
+	EEeraseAll = 0x0120, EEwriteAll = 0x0110,
+	EEaddrMask = 0x013F, EEcmdShift = 16
+};
+
+/* For SiS962 or SiS963, request the eeprom software access */
+enum sis96x_eeprom_command {
+	EEREQ = 0x00000400, EEDONE = 0x00000200, EEGNT = 0x00000100
+};
+
+/* PCI Registers */
+enum sis900_pci_registers {
+	CFGPMC 	 = 0x40,
+	CFGPMCSR = 0x44
+};
+
+/* Power management capabilities bits */
+enum sis900_cfgpmc_register_bits {
+	PMVER	= 0x00070000,
+	DSI	= 0x00100000,
+	PMESP	= 0xf8000000
+};
+
+enum sis900_pmesp_bits {
+	PME_D0 = 0x1,
+	PME_D1 = 0x2,
+	PME_D2 = 0x4,
+	PME_D3H = 0x8,
+	PME_D3C = 0x10
+};
+
+/* Power management control/status bits */
+enum sis900_cfgpmcsr_register_bits {
+	PMESTS = 0x00004000,
+	PME_EN = 0x00000100, // Power management enable
+	PWR_STA = 0x00000003 // Current power state
+};
+
+/* Wake-on-LAN support. */
+enum sis900_power_management_control_register_bits {
+	LINKLOSS  = 0x00000001,
+	LINKON    = 0x00000002,
+	MAGICPKT  = 0x00000400,
+	ALGORITHM = 0x00000800,
+	FRM1EN    = 0x00100000,
+	FRM2EN    = 0x00200000,
+	FRM3EN    = 0x00400000,
+	FRM1ACS   = 0x01000000,
+	FRM2ACS   = 0x02000000,
+	FRM3ACS   = 0x04000000,
+	WAKEALL   = 0x40000000,
+	GATECLK   = 0x80000000
+};
+
+/* Management Data I/O (mdio) frame */
+#define MIIread         0x6000
+#define MIIwrite        0x5002
+#define MIIpmdShift     7
+#define MIIregShift     2
+#define MIIcmdLen       16
+#define MIIcmdShift     16
+
+/* Buffer Descriptor Status*/
+enum sis900_buffer_status {
+	OWN    = 0x80000000, MORE   = 0x40000000, INTR = 0x20000000,
+	SUPCRC = 0x10000000, INCCRC = 0x10000000,
+	OK     = 0x08000000, DSIZE  = 0x00000FFF
+};
+/* Status for TX Buffers */
+enum sis900_tx_buffer_status {
+	ABORT   = 0x04000000, UNDERRUN = 0x02000000, NOCARRIER = 0x01000000,
+	DEFERD  = 0x00800000, EXCDEFER = 0x00400000, OWCOLL    = 0x00200000,
+	EXCCOLL = 0x00100000, COLCNT   = 0x000F0000
+};
+
+enum sis900_rx_bufer_status {
+	OVERRUN = 0x02000000, DEST = 0x00800000,     BCAST = 0x01800000,
+	MCAST   = 0x01000000, UNIMATCH = 0x00800000, TOOLONG = 0x00400000,
+	RUNT    = 0x00200000, RXISERR  = 0x00100000, CRCERR  = 0x00080000,
+	FAERR   = 0x00040000, LOOPBK   = 0x00020000, RXCOL   = 0x00010000
+};
+
+/* MII register offsets */
+enum mii_registers {
+	MII_CONTROL = 0x0000, MII_STATUS = 0x0001, MII_PHY_ID0 = 0x0002,
+	MII_PHY_ID1 = 0x0003, MII_ANADV  = 0x0004, MII_ANLPAR  = 0x0005,
+	MII_ANEXT   = 0x0006
+};
+
+/* mii registers specific to SiS 900 */
+enum sis_mii_registers {
+	MII_CONFIG1 = 0x0010, MII_CONFIG2 = 0x0011, MII_STSOUT = 0x0012,
+	MII_MASK    = 0x0013, MII_RESV    = 0x0014
+};
+
+/* mii registers specific to ICS 1893 */
+enum ics_mii_registers {
+	MII_EXTCTRL  = 0x0010, MII_QPDSTS = 0x0011, MII_10BTOP = 0x0012,
+	MII_EXTCTRL2 = 0x0013
+};
+
+/* mii registers specific to AMD 79C901 */
+enum amd_mii_registers {
+	MII_STATUS_SUMMARY = 0x0018
+};
+
+/* MII Control register bit definitions. */
+enum mii_control_register_bits {
+	MII_CNTL_FDX     = 0x0100, MII_CNTL_RST_AUTO = 0x0200,
+	MII_CNTL_ISOLATE = 0x0400, MII_CNTL_PWRDWN   = 0x0800,
+	MII_CNTL_AUTO    = 0x1000, MII_CNTL_SPEED    = 0x2000,
+	MII_CNTL_LPBK    = 0x4000, MII_CNTL_RESET    = 0x8000
+};
+
+/* MII Status register bit  */
+enum mii_status_register_bits {
+	MII_STAT_EXT    = 0x0001, MII_STAT_JAB        = 0x0002,
+	MII_STAT_LINK   = 0x0004, MII_STAT_CAN_AUTO   = 0x0008,
+	MII_STAT_FAULT  = 0x0010, MII_STAT_AUTO_DONE  = 0x0020,
+	MII_STAT_CAN_T  = 0x0800, MII_STAT_CAN_T_FDX  = 0x1000,
+	MII_STAT_CAN_TX = 0x2000, MII_STAT_CAN_TX_FDX = 0x4000,
+	MII_STAT_CAN_T4 = 0x8000
+};
+
+#define		MII_ID1_OUI_LO		0xFC00	/* low bits of OUI mask */
+#define		MII_ID1_MODEL		0x03F0	/* model number */
+#define		MII_ID1_REV		0x000F	/* model number */
+
+/* MII NWAY Register Bits ...
+   valid for the ANAR (Auto-Negotiation Advertisement) and
+   ANLPAR (Auto-Negotiation Link Partner) registers */
+enum mii_nway_register_bits {
+	MII_NWAY_NODE_SEL = 0x001f, MII_NWAY_CSMA_CD = 0x0001,
+	MII_NWAY_T	  = 0x0020, MII_NWAY_T_FDX   = 0x0040,
+	MII_NWAY_TX       = 0x0080, MII_NWAY_TX_FDX  = 0x0100,
+	MII_NWAY_T4       = 0x0200, MII_NWAY_PAUSE   = 0x0400,
+	MII_NWAY_RF       = 0x2000, MII_NWAY_ACK     = 0x4000,
+	MII_NWAY_NP       = 0x8000
+};
+
+enum mii_stsout_register_bits {
+	MII_STSOUT_LINK_FAIL = 0x4000,
+	MII_STSOUT_SPD       = 0x0080, MII_STSOUT_DPLX = 0x0040
+};
+
+enum mii_stsics_register_bits {
+	MII_STSICS_SPD  = 0x8000, MII_STSICS_DPLX = 0x4000,
+	MII_STSICS_LINKSTS = 0x0001
+};
+
+enum mii_stssum_register_bits {
+	MII_STSSUM_LINK = 0x0008, MII_STSSUM_DPLX = 0x0004,
+	MII_STSSUM_AUTO = 0x0002, MII_STSSUM_SPD  = 0x0001
+};
+
+enum sis900_revision_id {
+	SIS630A_900_REV = 0x80,		SIS630E_900_REV = 0x81,
+	SIS630S_900_REV = 0x82,		SIS630EA1_900_REV = 0x83,
+	SIS630ET_900_REV = 0x84,	SIS635A_900_REV = 0x90,
+	SIS96x_900_REV = 0X91,		SIS900B_900_REV = 0x03
+};
+
+enum sis630_revision_id {
+	SIS630A0    = 0x00, SIS630A1      = 0x01,
+	SIS630B0    = 0x10, SIS630B1      = 0x11
+};
+
+#define FDX_CAPABLE_DUPLEX_UNKNOWN      0
+#define FDX_CAPABLE_HALF_SELECTED       1
+#define FDX_CAPABLE_FULL_SELECTED       2
+
+#define HW_SPEED_UNCONFIG		0
+#define HW_SPEED_HOME		1
+#define HW_SPEED_10_MBPS        	10
+#define HW_SPEED_100_MBPS       	100
+#define HW_SPEED_DEFAULT        	(HW_SPEED_100_MBPS)
+
+#define CRC_SIZE                4
+#define MAC_HEADER_SIZE         14
+
+#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
+#define MAX_FRAME_SIZE  (1518 + 4)
+#else
+#define MAX_FRAME_SIZE  1518
+#endif /* CONFIG_VLAN_802_1Q */
+
+#define TX_BUF_SIZE     (MAX_FRAME_SIZE+18)
+#define RX_BUF_SIZE     (MAX_FRAME_SIZE+18)
+
+#define NUM_TX_DESC     16      	/* Number of Tx descriptor registers. */
+#define NUM_RX_DESC     16       	/* Number of Rx descriptor registers. */
+#define TX_TOTAL_SIZE	NUM_TX_DESC*sizeof(BufferDesc)
+#define RX_TOTAL_SIZE	NUM_RX_DESC*sizeof(BufferDesc)
+
+/* PCI stuff, should be move to pci.h */
+#define SIS630_VENDOR_ID        0x1039
+#define SIS630_DEVICE_ID        0x0630