net: lan743x: Add support to SGMII 1G and 2.5G

Add SGMII access read and write functions
Add support to SGMII 1G and 2.5G for PCI11010/PCI11414 chips

Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

3 files changed, 442 insertions, 9 deletions

diff --git a/drivers/net/ethernet/microchip/lan743x_ethtool.c b/drivers/net/ethernet/microchip/lan743x_ethtool.c
index 99776f7b64aa..b1c74e6cb012 100644
--- a/drivers/net/ethernet/microchip/lan743x_ethtool.c
+++ b/drivers/net/ethernet/microchip/lan743x_ethtool.c
@@ -155,8 +155,8 @@ static int lan743x_otp_write(struct lan743x_adapter *adapter, u32 offset,
 	return 0;
 }
 
-static int lan743x_hs_syslock_acquire(struct lan743x_adapter *adapter,
-				      u16 timeout)
+int lan743x_hs_syslock_acquire(struct lan743x_adapter *adapter,
+			       u16 timeout)
 {
 	u16 timeout_cnt = 0;
 	u32 val;
@@ -192,7 +192,7 @@ static int lan743x_hs_syslock_acquire(struct lan743x_adapter *adapter,
 	return 0;
 }
 
-static void lan743x_hs_syslock_release(struct lan743x_adapter *adapter)
+void lan743x_hs_syslock_release(struct lan743x_adapter *adapter)
 {
 	u32 val;
 
diff --git a/drivers/net/ethernet/microchip/lan743x_main.c b/drivers/net/ethernet/microchip/lan743x_main.c
index 6352cba19691..79ecf296161e 100644
--- a/drivers/net/ethernet/microchip/lan743x_main.c
+++ b/drivers/net/ethernet/microchip/lan743x_main.c
@@ -22,20 +22,36 @@
 #define MMD_ACCESS_WRITE	1
 #define MMD_ACCESS_READ		2
 #define MMD_ACCESS_READ_INC	3
+#define PCS_POWER_STATE_DOWN	0x6
+#define PCS_POWER_STATE_UP	0x4
 
 static void pci11x1x_strap_get_status(struct lan743x_adapter *adapter)
 {
 	u32 chip_rev;
+	u32 cfg_load;
+	u32 hw_cfg;
 	u32 strap;
+	int ret;
+
+	/* Timeout = 100 (i.e. 1 sec (10 msce * 100)) */
+	ret = lan743x_hs_syslock_acquire(adapter, 100);
+	if (ret < 0) {
+		netif_err(adapter, drv, adapter->netdev,
+			  "Sys Lock acquire failed ret:%d\n", ret);
+		return;
+	}
 
-	strap = lan743x_csr_read(adapter, STRAP_READ);
-	if (strap & STRAP_READ_USE_SGMII_EN_) {
+	cfg_load = lan743x_csr_read(adapter, ETH_SYS_CONFIG_LOAD_STARTED_REG);
+	lan743x_hs_syslock_release(adapter);
+	hw_cfg = lan743x_csr_read(adapter, HW_CFG);
+
+	if (cfg_load & GEN_SYS_LOAD_STARTED_REG_ETH_ ||
+	    hw_cfg & HW_CFG_RST_PROTECT_) {
+		strap = lan743x_csr_read(adapter, STRAP_READ);
 		if (strap & STRAP_READ_SGMII_EN_)
 			adapter->is_sgmii_en = true;
 		else
 			adapter->is_sgmii_en = false;
-		netif_dbg(adapter, drv, adapter->netdev,
-			  "STRAP_READ: 0x%08X\n", strap);
 	} else {
 		chip_rev = lan743x_csr_read(adapter, FPGA_REV);
 		if (chip_rev) {
@@ -43,12 +59,12 @@ static void pci11x1x_strap_get_status(struct lan743x_adapter *adapter)
 				adapter->is_sgmii_en = true;
 			else
 				adapter->is_sgmii_en = false;
-			netif_dbg(adapter, drv, adapter->netdev,
-				  "FPGA_REV: 0x%08X\n", chip_rev);
 		} else {
 			adapter->is_sgmii_en = false;
 		}
 	}
+	netif_dbg(adapter, drv, adapter->netdev,
+		  "SGMII I/F %sable\n", adapter->is_sgmii_en ? "En" : "Dis");
 }
 
 static bool is_pci11x1x_chip(struct lan743x_adapter *adapter)
@@ -909,6 +925,318 @@ static int lan743x_mdiobus_c45_write(struct mii_bus *bus,
 	return ret;
 }
 
+static int lan743x_sgmii_wait_till_not_busy(struct lan743x_adapter *adapter)
+{
+	u32 data;
+	int ret;
+
+	ret = readx_poll_timeout(LAN743X_CSR_READ_OP, SGMII_ACC, data,
+				 !(data & SGMII_ACC_SGMII_BZY_), 100, 1000000);
+	if (ret < 0)
+		netif_err(adapter, drv, adapter->netdev,
+			  "%s: error %d sgmii wait timeout\n", __func__, ret);
+
+	return ret;
+}
+
+static int lan743x_sgmii_read(struct lan743x_adapter *adapter, u8 mmd, u16 addr)
+{
+	u32 mmd_access;
+	int ret;
+	u32 val;
+
+	if (mmd > 31) {
+		netif_err(adapter, probe, adapter->netdev,
+			  "%s mmd should <= 31\n", __func__);
+		return -EINVAL;
+	}
+
+	mutex_lock(&adapter->sgmii_rw_lock);
+	/* Load Register Address */
+	mmd_access = mmd << SGMII_ACC_SGMII_MMD_SHIFT_;
+	mmd_access |= (addr | SGMII_ACC_SGMII_BZY_);
+	lan743x_csr_write(adapter, SGMII_ACC, mmd_access);
+	ret = lan743x_sgmii_wait_till_not_busy(adapter);
+	if (ret < 0)
+		goto sgmii_unlock;
+
+	val = lan743x_csr_read(adapter, SGMII_DATA);
+	ret = (int)(val & SGMII_DATA_MASK_);
+
+sgmii_unlock:
+	mutex_unlock(&adapter->sgmii_rw_lock);
+
+	return ret;
+}
+
+static int lan743x_sgmii_write(struct lan743x_adapter *adapter,
+			       u8 mmd, u16 addr, u16 val)
+{
+	u32 mmd_access;
+	int ret;
+
+	if (mmd > 31) {
+		netif_err(adapter, probe, adapter->netdev,
+			  "%s mmd should <= 31\n", __func__);
+		return -EINVAL;
+	}
+	mutex_lock(&adapter->sgmii_rw_lock);
+	/* Load Register Data */
+	lan743x_csr_write(adapter, SGMII_DATA, (u32)(val & SGMII_DATA_MASK_));
+	/* Load Register Address */
+	mmd_access = mmd << SGMII_ACC_SGMII_MMD_SHIFT_;
+	mmd_access |= (addr | SGMII_ACC_SGMII_BZY_ | SGMII_ACC_SGMII_WR_);
+	lan743x_csr_write(adapter, SGMII_ACC, mmd_access);
+	ret = lan743x_sgmii_wait_till_not_busy(adapter);
+	mutex_unlock(&adapter->sgmii_rw_lock);
+
+	return ret;
+}
+
+static int lan743x_sgmii_mpll_set(struct lan743x_adapter *adapter,
+				  u16 baud)
+{
+	int mpllctrl0;
+	int mpllctrl1;
+	int miscctrl1;
+	int ret;
+
+	mpllctrl0 = lan743x_sgmii_read(adapter, MDIO_MMD_VEND2,
+				       VR_MII_GEN2_4_MPLL_CTRL0);
+	if (mpllctrl0 < 0)
+		return mpllctrl0;
+
+	mpllctrl0 &= ~VR_MII_MPLL_CTRL0_USE_REFCLK_PAD_;
+	if (baud == VR_MII_BAUD_RATE_1P25GBPS) {
+		mpllctrl1 = VR_MII_MPLL_MULTIPLIER_100;
+		/* mpll_baud_clk/4 */
+		miscctrl1 = 0xA;
+	} else {
+		mpllctrl1 = VR_MII_MPLL_MULTIPLIER_125;
+		/* mpll_baud_clk/2 */
+		miscctrl1 = 0x5;
+	}
+
+	ret = lan743x_sgmii_write(adapter, MDIO_MMD_VEND2,
+				  VR_MII_GEN2_4_MPLL_CTRL0, mpllctrl0);
+	if (ret < 0)
+		return ret;
+
+	ret = lan743x_sgmii_write(adapter, MDIO_MMD_VEND2,
+				  VR_MII_GEN2_4_MPLL_CTRL1, mpllctrl1);
+	if (ret < 0)
+		return ret;
+
+	return lan743x_sgmii_write(adapter, MDIO_MMD_VEND2,
+				  VR_MII_GEN2_4_MISC_CTRL1, miscctrl1);
+}
+
+static int lan743x_sgmii_2_5G_mode_set(struct lan743x_adapter *adapter,
+				       bool enable)
+{
+	if (enable)
+		return lan743x_sgmii_mpll_set(adapter,
+					      VR_MII_BAUD_RATE_3P125GBPS);
+	else
+		return lan743x_sgmii_mpll_set(adapter,
+					      VR_MII_BAUD_RATE_1P25GBPS);
+}
+
+static int lan743x_is_sgmii_2_5G_mode(struct lan743x_adapter *adapter,
+				      bool *status)
+{
+	int ret;
+
+	ret = lan743x_sgmii_read(adapter, MDIO_MMD_VEND2,
+				 VR_MII_GEN2_4_MPLL_CTRL1);
+	if (ret < 0)
+		return ret;
+
+	if (ret == VR_MII_MPLL_MULTIPLIER_125 ||
+	    ret == VR_MII_MPLL_MULTIPLIER_50)
+		*status = true;
+	else
+		*status = false;
+
+	return 0;
+}
+
+static int lan743x_sgmii_aneg_update(struct lan743x_adapter *adapter)
+{
+	enum lan743x_sgmii_lsd lsd = adapter->sgmii_lsd;
+	int mii_ctrl;
+	int dgt_ctrl;
+	int an_ctrl;
+	int ret;
+
+	if (lsd == LINK_2500_MASTER || lsd == LINK_2500_SLAVE)
+		/* Switch to 2.5 Gbps */
+		ret = lan743x_sgmii_2_5G_mode_set(adapter, true);
+	else
+		/* Switch to 10/100/1000 Mbps clock */
+		ret = lan743x_sgmii_2_5G_mode_set(adapter, false);
+	if (ret < 0)
+		return ret;
+
+	/* Enable SGMII Auto NEG */
+	mii_ctrl = lan743x_sgmii_read(adapter, MDIO_MMD_VEND2, MII_BMCR);
+	if (mii_ctrl < 0)
+		return mii_ctrl;
+
+	an_ctrl = lan743x_sgmii_read(adapter, MDIO_MMD_VEND2, VR_MII_AN_CTRL);
+	if (an_ctrl < 0)
+		return an_ctrl;
+
+	dgt_ctrl = lan743x_sgmii_read(adapter, MDIO_MMD_VEND2,
+				      VR_MII_DIG_CTRL1);
+	if (dgt_ctrl < 0)
+		return dgt_ctrl;
+
+	if (lsd == LINK_2500_MASTER || lsd == LINK_2500_SLAVE) {
+		mii_ctrl &= ~(BMCR_ANENABLE | BMCR_ANRESTART | BMCR_SPEED100);
+		mii_ctrl |= BMCR_SPEED1000;
+		dgt_ctrl |= VR_MII_DIG_CTRL1_CL37_TMR_OVR_RIDE_;
+		dgt_ctrl &= ~VR_MII_DIG_CTRL1_MAC_AUTO_SW_;
+		/* In order for Auto-Negotiation to operate properly at
+		 * 2.5 Gbps the 1.6ms link timer values must be adjusted
+		 * The VR_MII_LINK_TIMER_CTRL Register must be set to
+		 * 16'h7A1 and The CL37_TMR_OVR_RIDE bit of the
+		 * VR_MII_DIG_CTRL1 Register set to 1
+		 */
+		ret = lan743x_sgmii_write(adapter, MDIO_MMD_VEND2,
+					  VR_MII_LINK_TIMER_CTRL, 0x7A1);
+		if (ret < 0)
+			return ret;
+	} else {
+		mii_ctrl |= (BMCR_ANENABLE | BMCR_ANRESTART);
+		an_ctrl &= ~VR_MII_AN_CTRL_SGMII_LINK_STS_;
+		dgt_ctrl &= ~VR_MII_DIG_CTRL1_CL37_TMR_OVR_RIDE_;
+		dgt_ctrl |= VR_MII_DIG_CTRL1_MAC_AUTO_SW_;
+	}
+
+	ret = lan743x_sgmii_write(adapter, MDIO_MMD_VEND2, MII_BMCR,
+				  mii_ctrl);
+	if (ret < 0)
+		return ret;
+
+	ret = lan743x_sgmii_write(adapter, MDIO_MMD_VEND2,
+				  VR_MII_DIG_CTRL1, dgt_ctrl);
+	if (ret < 0)
+		return ret;
+
+	return lan743x_sgmii_write(adapter, MDIO_MMD_VEND2,
+				  VR_MII_AN_CTRL, an_ctrl);
+}
+
+static int lan743x_pcs_seq_state(struct lan743x_adapter *adapter, u8 state)
+{
+	u8 wait_cnt = 0;
+	u32 dig_sts;
+
+	do {
+		dig_sts = lan743x_sgmii_read(adapter, MDIO_MMD_VEND2,
+					     VR_MII_DIG_STS);
+		if (((dig_sts & VR_MII_DIG_STS_PSEQ_STATE_MASK_) >>
+		      VR_MII_DIG_STS_PSEQ_STATE_POS_) == state)
+			break;
+		usleep_range(1000, 2000);
+	} while (wait_cnt++ < 10);
+
+	if (wait_cnt >= 10)
+		return -ETIMEDOUT;
+
+	return 0;
+}
+
+static int lan743x_sgmii_config(struct lan743x_adapter *adapter)
+{
+	struct net_device *netdev = adapter->netdev;
+	struct phy_device *phydev = netdev->phydev;
+	enum lan743x_sgmii_lsd lsd = POWER_DOWN;
+	int mii_ctl;
+	bool status;
+	int ret;
+
+	switch (phydev->speed) {
+	case SPEED_2500:
+		if (phydev->master_slave_state == MASTER_SLAVE_STATE_MASTER)
+			lsd = LINK_2500_MASTER;
+		else
+			lsd = LINK_2500_SLAVE;
+		break;
+	case SPEED_1000:
+		if (phydev->master_slave_state == MASTER_SLAVE_STATE_MASTER)
+			lsd = LINK_1000_MASTER;
+		else
+			lsd = LINK_1000_SLAVE;
+		break;
+	case SPEED_100:
+		if (phydev->duplex)
+			lsd = LINK_100FD;
+		else
+			lsd = LINK_100HD;
+		break;
+	case SPEED_10:
+		if (phydev->duplex)
+			lsd = LINK_10FD;
+		else
+			lsd = LINK_10HD;
+		break;
+	default:
+		netif_err(adapter, drv, adapter->netdev,
+			  "Invalid speed %d\n", phydev->speed);
+		return -EINVAL;
+	}
+
+	adapter->sgmii_lsd = lsd;
+	ret = lan743x_sgmii_aneg_update(adapter);
+	if (ret < 0) {
+		netif_err(adapter, drv, adapter->netdev,
+			  "error %d SGMII cfg failed\n", ret);
+		return ret;
+	}
+
+	ret = lan743x_is_sgmii_2_5G_mode(adapter, &status);
+	if (ret < 0) {
+		netif_err(adapter, drv, adapter->netdev,
+			  "erro %d SGMII get mode failed\n", ret);
+		return ret;
+	}
+
+	if (status)
+		netif_dbg(adapter, drv, adapter->netdev,
+			  "SGMII 2.5G mode enable\n");
+	else
+		netif_dbg(adapter, drv, adapter->netdev,
+			  "SGMII 1G mode enable\n");
+
+	/* SGMII/1000/2500BASE-X PCS power down */
+	mii_ctl = lan743x_sgmii_read(adapter, MDIO_MMD_VEND2, MII_BMCR);
+	if (ret < 0)
+		return ret;
+
+	mii_ctl |= BMCR_PDOWN;
+	ret = lan743x_sgmii_write(adapter, MDIO_MMD_VEND2, MII_BMCR, mii_ctl);
+	if (ret < 0)
+		return ret;
+
+	ret = lan743x_pcs_seq_state(adapter, PCS_POWER_STATE_DOWN);
+	if (ret < 0)
+		return ret;
+
+	/* SGMII/1000/2500BASE-X PCS power up */
+	mii_ctl &= ~BMCR_PDOWN;
+	ret = lan743x_sgmii_write(adapter, MDIO_MMD_VEND2, MII_BMCR, mii_ctl);
+	if (ret < 0)
+		return ret;
+
+	ret = lan743x_pcs_seq_state(adapter, PCS_POWER_STATE_UP);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
 static void lan743x_mac_set_address(struct lan743x_adapter *adapter,
 				    u8 *addr)
 {
@@ -1124,6 +1452,10 @@ static void lan743x_phy_link_status_change(struct net_device *netdev)
 			data |= MAC_CR_CFG_H_;
 			data &= ~MAC_CR_CFG_L_;
 		break;
+		case SPEED_2500:
+			data |= MAC_CR_CFG_H_;
+			data |= MAC_CR_CFG_L_;
+		break;
 		}
 		lan743x_csr_write(adapter, MAC_CR, data);
 
@@ -1135,6 +1467,10 @@ static void lan743x_phy_link_status_change(struct net_device *netdev)
 		lan743x_phy_update_flowcontrol(adapter, local_advertisement,
 					       remote_advertisement);
 		lan743x_ptp_update_latency(adapter, phydev->speed);
+		if (phydev->interface == PHY_INTERFACE_MODE_SGMII ||
+		    phydev->interface == PHY_INTERFACE_MODE_1000BASEX ||
+		    phydev->interface == PHY_INTERFACE_MODE_2500BASEX)
+			lan743x_sgmii_config(adapter);
 	}
 }
 
@@ -2875,6 +3211,7 @@ static int lan743x_hardware_init(struct lan743x_adapter *adapter,
 		adapter->max_vector_count = PCI11X1X_MAX_VECTOR_COUNT;
 		pci11x1x_strap_get_status(adapter);
 		spin_lock_init(&adapter->eth_syslock_spinlock);
+		mutex_init(&adapter->sgmii_rw_lock);
 	} else {
 		adapter->max_tx_channels = LAN743X_MAX_TX_CHANNELS;
 		adapter->used_tx_channels = LAN743X_USED_TX_CHANNELS;
diff --git a/drivers/net/ethernet/microchip/lan743x_main.h b/drivers/net/ethernet/microchip/lan743x_main.h
index 5d37263b25c8..72adae4f2aa0 100644
--- a/drivers/net/ethernet/microchip/lan743x_main.h
+++ b/drivers/net/ethernet/microchip/lan743x_main.h
@@ -97,6 +97,11 @@
 #define CONFIG_REG_ADDR_BASE		(0x0000)
 #define ETH_EEPROM_REG_ADDR_BASE	(0x0E00)
 #define ETH_OTP_REG_ADDR_BASE		(0x1000)
+#define GEN_SYS_CONFIG_LOAD_STARTED_REG	(0x0078)
+#define ETH_SYS_CONFIG_LOAD_STARTED_REG (ETH_SYS_REG_ADDR_BASE + \
+					 CONFIG_REG_ADDR_BASE + \
+					 GEN_SYS_CONFIG_LOAD_STARTED_REG)
+#define GEN_SYS_LOAD_STARTED_REG_ETH_	BIT(4)
 #define SYS_LOCK_REG			(0x00A0)
 #define SYS_LOCK_REG_MAIN_LOCK_		BIT(7)
 #define SYS_LOCK_REG_GEN_PERI_LOCK_	BIT(5)
@@ -288,11 +293,82 @@
 
 #define MAC_WUCSR2			(0x600)
 
+#define SGMII_ACC			(0x720)
+#define SGMII_ACC_SGMII_BZY_		BIT(31)
+#define SGMII_ACC_SGMII_WR_		BIT(30)
+#define SGMII_ACC_SGMII_MMD_SHIFT_	(16)
+#define SGMII_ACC_SGMII_MMD_MASK_	GENMASK(20, 16)
+#define SGMII_ACC_SGMII_MMD_VSR_	BIT(15)
+#define SGMII_ACC_SGMII_ADDR_SHIFT_	(0)
+#define SGMII_ACC_SGMII_ADDR_MASK_	GENMASK(15, 0)
+#define SGMII_DATA			(0x724)
+#define SGMII_DATA_SHIFT_		(0)
+#define SGMII_DATA_MASK_		GENMASK(15, 0)
 #define SGMII_CTL			(0x728)
 #define SGMII_CTL_SGMII_ENABLE_		BIT(31)
 #define SGMII_CTL_LINK_STATUS_SOURCE_	BIT(8)
 #define SGMII_CTL_SGMII_POWER_DN_	BIT(1)
 
+/* Vendor Specific SGMII MMD details */
+#define SR_VSMMD_PCS_ID1		0x0004
+#define SR_VSMMD_PCS_ID2		0x0005
+#define SR_VSMMD_STS			0x0008
+#define SR_VSMMD_CTRL			0x0009
+
+#define VR_MII_DIG_CTRL1			0x8000
+#define VR_MII_DIG_CTRL1_VR_RST_		BIT(15)
+#define VR_MII_DIG_CTRL1_R2TLBE_		BIT(14)
+#define VR_MII_DIG_CTRL1_EN_VSMMD1_		BIT(13)
+#define VR_MII_DIG_CTRL1_CS_EN_			BIT(10)
+#define VR_MII_DIG_CTRL1_MAC_AUTO_SW_		BIT(9)
+#define VR_MII_DIG_CTRL1_INIT_			BIT(8)
+#define VR_MII_DIG_CTRL1_DTXLANED_0_		BIT(4)
+#define VR_MII_DIG_CTRL1_CL37_TMR_OVR_RIDE_	BIT(3)
+#define VR_MII_DIG_CTRL1_EN_2_5G_MODE_		BIT(2)
+#define VR_MII_DIG_CTRL1_BYP_PWRUP_		BIT(1)
+#define VR_MII_DIG_CTRL1_PHY_MODE_CTRL_		BIT(0)
+#define VR_MII_AN_CTRL				0x8001
+#define VR_MII_AN_CTRL_MII_CTRL_		BIT(8)
+#define VR_MII_AN_CTRL_SGMII_LINK_STS_		BIT(4)
+#define VR_MII_AN_CTRL_TX_CONFIG_		BIT(3)
+#define VR_MII_AN_CTRL_1000BASE_X_		(0)
+#define VR_MII_AN_CTRL_SGMII_MODE_		(2)
+#define VR_MII_AN_CTRL_QSGMII_MODE_		(3)
+#define VR_MII_AN_CTRL_PCS_MODE_SHIFT_		(1)
+#define VR_MII_AN_CTRL_PCS_MODE_MASK_		GENMASK(2, 1)
+#define VR_MII_AN_CTRL_MII_AN_INTR_EN_		BIT(0)
+#define VR_MII_AN_INTR_STS			0x8002
+#define VR_MII_AN_INTR_STS_LINK_UP_		BIT(4)
+#define VR_MII_AN_INTR_STS_SPEED_MASK_		GENMASK(3, 2)
+#define VR_MII_AN_INTR_STS_1000_MBPS_		BIT(3)
+#define VR_MII_AN_INTR_STS_100_MBPS_		BIT(2)
+#define VR_MII_AN_INTR_STS_10_MBPS_		(0)
+#define VR_MII_AN_INTR_STS_FDX_			BIT(1)
+#define VR_MII_AN_INTR_STS_CL37_ANCMPLT_INTR_	BIT(0)
+
+#define VR_MII_LINK_TIMER_CTRL			0x800A
+#define VR_MII_DIG_STS                          0x8010
+#define VR_MII_DIG_STS_PSEQ_STATE_MASK_         GENMASK(4, 2)
+#define VR_MII_DIG_STS_PSEQ_STATE_POS_          (2)
+#define VR_MII_GEN2_4_MPLL_CTRL0		0x8078
+#define VR_MII_MPLL_CTRL0_REF_CLK_DIV2_		BIT(12)
+#define VR_MII_MPLL_CTRL0_USE_REFCLK_PAD_	BIT(4)
+#define VR_MII_GEN2_4_MPLL_CTRL1		0x8079
+#define VR_MII_MPLL_CTRL1_MPLL_MULTIPLIER_	GENMASK(6, 0)
+#define VR_MII_BAUD_RATE_3P125GBPS		(3125)
+#define VR_MII_BAUD_RATE_1P25GBPS		(1250)
+#define VR_MII_MPLL_MULTIPLIER_125		(125)
+#define VR_MII_MPLL_MULTIPLIER_100		(100)
+#define VR_MII_MPLL_MULTIPLIER_50		(50)
+#define VR_MII_MPLL_MULTIPLIER_40		(40)
+#define VR_MII_GEN2_4_MISC_CTRL1		0x809A
+#define VR_MII_CTRL1_RX_RATE_0_MASK_		GENMASK(3, 2)
+#define VR_MII_CTRL1_RX_RATE_0_SHIFT_		(2)
+#define VR_MII_CTRL1_TX_RATE_0_MASK_		GENMASK(1, 0)
+#define VR_MII_MPLL_BAUD_CLK			(0)
+#define VR_MII_MPLL_BAUD_CLK_DIV_2		(1)
+#define VR_MII_MPLL_BAUD_CLK_DIV_4		(2)
+
 #define INT_STS				(0x780)
 #define INT_BIT_DMA_RX_(channel)	BIT(24 + (channel))
 #define INT_BIT_ALL_RX_			(0x0F000000)
@@ -914,6 +990,21 @@ struct lan743x_rx {
 	struct sk_buff *skb_head, *skb_tail;
 };
 
+/* SGMII Link Speed Duplex status */
+enum lan743x_sgmii_lsd {
+	POWER_DOWN = 0,
+	LINK_DOWN,
+	ANEG_BUSY,
+	LINK_10HD,
+	LINK_10FD,
+	LINK_100HD,
+	LINK_100FD,
+	LINK_1000_MASTER,
+	LINK_1000_SLAVE,
+	LINK_2500_MASTER,
+	LINK_2500_SLAVE
+};
+
 struct lan743x_adapter {
 	struct net_device       *netdev;
 	struct mii_bus		*mdiobus;
@@ -940,6 +1031,9 @@ struct lan743x_adapter {
 	spinlock_t		eth_syslock_spinlock;
 	bool			eth_syslock_en;
 	u32			eth_syslock_acquire_cnt;
+	struct mutex		sgmii_rw_lock;
+	/* SGMII Link Speed & Duplex status */
+	enum			lan743x_sgmii_lsd sgmii_lsd;
 	u8			max_tx_channels;
 	u8			used_tx_channels;
 	u8			max_vector_count;
@@ -1059,5 +1153,7 @@ struct lan743x_rx_buffer_info {
 
 u32 lan743x_csr_read(struct lan743x_adapter *adapter, int offset);
 void lan743x_csr_write(struct lan743x_adapter *adapter, int offset, u32 data);
+int lan743x_hs_syslock_acquire(struct lan743x_adapter *adapter, u16 timeout);
+void lan743x_hs_syslock_release(struct lan743x_adapter *adapter);
 
 #endif /* _LAN743X_H */