ice: Detect and report unsupported module power levels

Determine whether an unsupported power configuration is preventing link
establishment by storing and checking the link_cfg_err_byte. Print error
messages when module power levels are unsupported. Also add a new flag
bit to prevent spamming said error messages.

Co-developed-by: Jeb Cramer <jeb.j.cramer@intel.com>
Signed-off-by: Jeb Cramer <jeb.j.cramer@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

1 files changed, 40 insertions, 0 deletions

diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c
index 7606ded59a84..4c0412d87b1a 100644
--- a/drivers/net/ethernet/intel/ice/ice_main.c
+++ b/drivers/net/ethernet/intel/ice/ice_main.c
@@ -865,6 +865,38 @@ static void ice_set_dflt_mib(struct ice_pf *pf)
 }
 
 /**
+ * ice_check_module_power
+ * @pf: pointer to PF struct
+ * @link_cfg_err: bitmap from the link info structure
+ *
+ * check module power level returned by a previous call to aq_get_link_info
+ * and print error messages if module power level is not supported
+ */
+static void ice_check_module_power(struct ice_pf *pf, u8 link_cfg_err)
+{
+	/* if module power level is supported, clear the flag */
+	if (!(link_cfg_err & (ICE_AQ_LINK_INVAL_MAX_POWER_LIMIT |
+			      ICE_AQ_LINK_MODULE_POWER_UNSUPPORTED))) {
+		clear_bit(ICE_FLAG_MOD_POWER_UNSUPPORTED, pf->flags);
+		return;
+	}
+
+	/* if ICE_FLAG_MOD_POWER_UNSUPPORTED was previously set and the
+	 * above block didn't clear this bit, there's nothing to do
+	 */
+	if (test_bit(ICE_FLAG_MOD_POWER_UNSUPPORTED, pf->flags))
+		return;
+
+	if (link_cfg_err & ICE_AQ_LINK_INVAL_MAX_POWER_LIMIT) {
+		dev_err(ice_pf_to_dev(pf), "The installed module is incompatible with the device's NVM image. Cannot start link\n");
+		set_bit(ICE_FLAG_MOD_POWER_UNSUPPORTED, pf->flags);
+	} else if (link_cfg_err & ICE_AQ_LINK_MODULE_POWER_UNSUPPORTED) {
+		dev_err(ice_pf_to_dev(pf), "The module's power requirements exceed the device's power supply. Cannot start link\n");
+		set_bit(ICE_FLAG_MOD_POWER_UNSUPPORTED, pf->flags);
+	}
+}
+
+/**
  * ice_link_event - process the link event
  * @pf: PF that the link event is associated with
  * @pi: port_info for the port that the link event is associated with
@@ -899,6 +931,8 @@ ice_link_event(struct ice_pf *pf, struct ice_port_info *pi, bool link_up,
 			pi->lport, ice_stat_str(status),
 			ice_aq_str(pi->hw->adminq.sq_last_status));
 
+	ice_check_module_power(pf, pi->phy.link_info.link_cfg_err);
+
 	/* Check if the link state is up after updating link info, and treat
 	 * this event as an UP event since the link is actually UP now.
 	 */
@@ -2013,6 +2047,8 @@ static void ice_check_media_subtask(struct ice_pf *pf)
 	if (err)
 		return;
 
+	ice_check_module_power(pf, pi->phy.link_info.link_cfg_err);
+
 	if (pi->phy.link_info.link_info & ICE_AQ_MEDIA_AVAILABLE) {
 		if (!test_bit(ICE_PHY_INIT_COMPLETE, pf->state))
 			ice_init_phy_user_cfg(pi);
@@ -4269,6 +4305,8 @@ ice_probe(struct pci_dev *pdev, const struct pci_device_id __always_unused *ent)
 
 	ice_init_link_dflt_override(pf->hw.port_info);
 
+	ice_check_module_power(pf, pf->hw.port_info->phy.link_info.link_cfg_err);
+
 	/* if media available, initialize PHY settings */
 	if (pf->hw.port_info->phy.link_info.link_info &
 	    ICE_AQ_MEDIA_AVAILABLE) {
@@ -6929,6 +6967,8 @@ int ice_open_internal(struct net_device *netdev)
 		return -EIO;
 	}
 
+	ice_check_module_power(pf, pi->phy.link_info.link_cfg_err);
+
 	/* Set PHY if there is media, otherwise, turn off PHY */
 	if (pi->phy.link_info.link_info & ICE_AQ_MEDIA_AVAILABLE) {
 		clear_bit(ICE_FLAG_NO_MEDIA, pf->flags);