Merge branch '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue

Jeff Kirsher says:

====================
40GbE Intel Wired LAN Driver Updates 2018-02-12

This series contains updates to i40e and i40evf.

Alan fixes a spelling mistake in code comments.  Fixes an issue on older
firmware versions or NPAR enabled PFs which do not support the
I40E_FLAG_DISABLE_FW_LLDP flag and would get into a situation where any
attempt to change any priv flag would be forbidden.

Alex got busy with the ITR code and made several cleanups and fixes so
that we can more easily understand what is going on.  The fixes included
a computational fix when determining the register offset, as well as a
fix for unnecessarily toggling the CLEARPBA bit which could lead to
potential lost events if auto-masking is not enabled.

Filip adds a necessary delay to recover after a EMP reset when using
firmware version 4.33.

Paweł adds a warning message for MFP devices when the link-down-on-close
flag is set because it may affect other partitions.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 34 insertions, 20 deletions

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index e31adbc75f9c..70ecd9c3a163 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -3449,15 +3449,20 @@ static void i40e_vsi_configure_msix(struct i40e_vsi *vsi)
 	for (i = 0; i < vsi->num_q_vectors; i++, vector++) {
 		struct i40e_q_vector *q_vector = vsi->q_vectors[i];
 
-		q_vector->itr_countdown = ITR_COUNTDOWN_START;
-		q_vector->rx.itr = ITR_TO_REG(vsi->rx_rings[i]->rx_itr_setting);
-		q_vector->rx.latency_range = I40E_LOW_LATENCY;
+		q_vector->rx.next_update = jiffies + 1;
+		q_vector->rx.target_itr =
+			ITR_TO_REG(vsi->rx_rings[i]->itr_setting);
 		wr32(hw, I40E_PFINT_ITRN(I40E_RX_ITR, vector - 1),
-		     q_vector->rx.itr);
-		q_vector->tx.itr = ITR_TO_REG(vsi->tx_rings[i]->tx_itr_setting);
-		q_vector->tx.latency_range = I40E_LOW_LATENCY;
+		     q_vector->rx.target_itr);
+		q_vector->rx.current_itr = q_vector->rx.target_itr;
+
+		q_vector->tx.next_update = jiffies + 1;
+		q_vector->tx.target_itr =
+			ITR_TO_REG(vsi->tx_rings[i]->itr_setting);
 		wr32(hw, I40E_PFINT_ITRN(I40E_TX_ITR, vector - 1),
-		     q_vector->tx.itr);
+		     q_vector->tx.target_itr);
+		q_vector->tx.current_itr = q_vector->tx.target_itr;
+
 		wr32(hw, I40E_PFINT_RATEN(vector - 1),
 		     i40e_intrl_usec_to_reg(vsi->int_rate_limit));
 
@@ -3558,13 +3563,14 @@ static void i40e_configure_msi_and_legacy(struct i40e_vsi *vsi)
 	u32 val;
 
 	/* set the ITR configuration */
-	q_vector->itr_countdown = ITR_COUNTDOWN_START;
-	q_vector->rx.itr = ITR_TO_REG(vsi->rx_rings[0]->rx_itr_setting);
-	q_vector->rx.latency_range = I40E_LOW_LATENCY;
-	wr32(hw, I40E_PFINT_ITR0(I40E_RX_ITR), q_vector->rx.itr);
-	q_vector->tx.itr = ITR_TO_REG(vsi->tx_rings[0]->tx_itr_setting);
-	q_vector->tx.latency_range = I40E_LOW_LATENCY;
-	wr32(hw, I40E_PFINT_ITR0(I40E_TX_ITR), q_vector->tx.itr);
+	q_vector->rx.next_update = jiffies + 1;
+	q_vector->rx.target_itr = ITR_TO_REG(vsi->rx_rings[0]->itr_setting);
+	wr32(hw, I40E_PFINT_ITR0(I40E_RX_ITR), q_vector->rx.target_itr);
+	q_vector->rx.current_itr = q_vector->rx.target_itr;
+	q_vector->tx.next_update = jiffies + 1;
+	q_vector->tx.target_itr = ITR_TO_REG(vsi->tx_rings[0]->itr_setting);
+	wr32(hw, I40E_PFINT_ITR0(I40E_TX_ITR), q_vector->tx.target_itr);
+	q_vector->tx.current_itr = q_vector->tx.target_itr;
 
 	i40e_enable_misc_int_causes(pf);
 
@@ -9215,6 +9221,17 @@ static void i40e_rebuild(struct i40e_pf *pf, bool reinit, bool lock_acquired)
 	}
 	i40e_get_oem_version(&pf->hw);
 
+	if (test_bit(__I40E_EMP_RESET_INTR_RECEIVED, pf->state) &&
+	    ((hw->aq.fw_maj_ver == 4 && hw->aq.fw_min_ver <= 33) ||
+	     hw->aq.fw_maj_ver < 4) && hw->mac.type == I40E_MAC_XL710) {
+		/* The following delay is necessary for 4.33 firmware and older
+		 * to recover after EMP reset. 200 ms should suffice but we
+		 * put here 300 ms to be sure that FW is ready to operate
+		 * after reset.
+		 */
+		mdelay(300);
+	}
+
 	/* re-verify the eeprom if we just had an EMP reset */
 	if (test_and_clear_bit(__I40E_EMP_RESET_INTR_RECEIVED, pf->state))
 		i40e_verify_eeprom(pf);
@@ -10018,7 +10035,7 @@ static int i40e_alloc_rings(struct i40e_vsi *vsi)
 		ring->dcb_tc = 0;
 		if (vsi->back->hw_features & I40E_HW_WB_ON_ITR_CAPABLE)
 			ring->flags = I40E_TXR_FLAGS_WB_ON_ITR;
-		ring->tx_itr_setting = pf->tx_itr_default;
+		ring->itr_setting = pf->tx_itr_default;
 		vsi->tx_rings[i] = ring++;
 
 		if (!i40e_enabled_xdp_vsi(vsi))
@@ -10036,7 +10053,7 @@ static int i40e_alloc_rings(struct i40e_vsi *vsi)
 		if (vsi->back->hw_features & I40E_HW_WB_ON_ITR_CAPABLE)
 			ring->flags = I40E_TXR_FLAGS_WB_ON_ITR;
 		set_ring_xdp(ring);
-		ring->tx_itr_setting = pf->tx_itr_default;
+		ring->itr_setting = pf->tx_itr_default;
 		vsi->xdp_rings[i] = ring++;
 
 setup_rx:
@@ -10049,7 +10066,7 @@ setup_rx:
 		ring->count = vsi->num_desc;
 		ring->size = 0;
 		ring->dcb_tc = 0;
-		ring->rx_itr_setting = pf->rx_itr_default;
+		ring->itr_setting = pf->rx_itr_default;
 		vsi->rx_rings[i] = ring;
 	}
 
@@ -10328,9 +10345,6 @@ static int i40e_vsi_alloc_q_vector(struct i40e_vsi *vsi, int v_idx, int cpu)
 		netif_napi_add(vsi->netdev, &q_vector->napi,
 			       i40e_napi_poll, NAPI_POLL_WEIGHT);
 
-	q_vector->rx.latency_range = I40E_LOW_LATENCY;
-	q_vector->tx.latency_range = I40E_LOW_LATENCY;
-
 	/* tie q_vector and vsi together */
 	vsi->q_vectors[v_idx] = q_vector;