diff options
| author | Vladimir Oltean <vladimir.oltean@nxp.com> | 2021-08-17 17:58:47 +0300 |
|---|---|---|
| committer | David S. Miller <davem@davemloft.net> | 2021-08-18 12:33:15 +0300 |
| commit | 994d2cbb08ca05e3c1af954ec63a3ae32a862ac5 (patch) | |
| tree | 8a15be27717739c6f4809478f7d6563a04605671 /drivers/net/dsa | |
| parent | 93e271632ccf0c65395900a9c12720652f769d2a (diff) | |
| download | linux-994d2cbb08ca05e3c1af954ec63a3ae32a862ac5.tar.xz | |
net: dsa: tag_sja1105: be dsa_loop-safe
Add support for tag_sja1105 running on non-sja1105 DSA ports, by making
sure that every time we dereference dp->priv, we check the switch's
dsa_switch_ops (otherwise we access a struct sja1105_port structure that
is in fact something else).
This adds an unconditional build-time dependency between sja1105 being
built as module => tag_sja1105 must also be built as module. This was
there only for PTP before.
Some sane defaults must also take place when not running on sja1105
hardware. These are:
- sja1105_xmit_tpid: the sja1105 driver uses different VLAN protocols
depending on VLAN awareness and switch revision (when an encapsulated
VLAN must be sent). Default to 0x8100.
- sja1105_rcv_meta_state_machine: this aggregates PTP frames with their
metadata timestamp frames. When running on non-sja1105 hardware, don't
do that and accept all frames unmodified.
- sja1105_defer_xmit: calls sja1105_port_deferred_xmit in sja1105_main.c
which writes a management route over SPI. When not running on sja1105
hardware, bypass the SPI write and send the frame as-is.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/dsa')
| -rw-r--r-- | drivers/net/dsa/sja1105/sja1105_main.c | 5 |
1 files changed, 2 insertions, 3 deletions
diff --git a/drivers/net/dsa/sja1105/sja1105_main.c b/drivers/net/dsa/sja1105/sja1105_main.c index fe894dc18335..05ba65042b5f 100644 --- a/drivers/net/dsa/sja1105/sja1105_main.c +++ b/drivers/net/dsa/sja1105/sja1105_main.c @@ -28,8 +28,6 @@ #define SJA1105_UNKNOWN_MULTICAST 0x010000000000ull #define SJA1105_DEFAULT_VLAN (VLAN_N_VID - 1) -static const struct dsa_switch_ops sja1105_switch_ops; - static void sja1105_hw_reset(struct gpio_desc *gpio, unsigned int pulse_len, unsigned int startup_delay) { @@ -3100,7 +3098,7 @@ static void sja1105_teardown(struct dsa_switch *ds) sja1105_static_config_free(&priv->static_config); } -static const struct dsa_switch_ops sja1105_switch_ops = { +const struct dsa_switch_ops sja1105_switch_ops = { .get_tag_protocol = sja1105_get_tag_protocol, .setup = sja1105_setup, .teardown = sja1105_teardown, @@ -3149,6 +3147,7 @@ static const struct dsa_switch_ops sja1105_switch_ops = { .port_bridge_tx_fwd_offload = dsa_tag_8021q_bridge_tx_fwd_offload, .port_bridge_tx_fwd_unoffload = dsa_tag_8021q_bridge_tx_fwd_unoffload, }; +EXPORT_SYMBOL_GPL(sja1105_switch_ops); static const struct of_device_id sja1105_dt_ids[]; |