arcnet: Use normal kernel spacing style

Standardized spacing is easier to read.

git diff -w shows no differences.
objdiff shows no differences.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>

1 files changed, 19 insertions, 19 deletions

diff --git a/drivers/net/arcnet/com20020.c b/drivers/net/arcnet/com20020.c
index 1a8437842fbc..cd2a5ca56ce5 100644
--- a/drivers/net/arcnet/com20020.c
+++ b/drivers/net/arcnet/com20020.c
@@ -1,6 +1,6 @@
 /*
  * Linux ARCnet driver - COM20020 chipset support
- * 
+ *
  * Written 1997 by David Woodhouse.
  * Written 1994-1999 by Avery Pennarun.
  * Written 1999 by Martin Mares <mj@ucw.cz>.
@@ -108,7 +108,7 @@ int com20020_check(struct net_device *dev)
 	{
 		SET_SUBADR(SUB_SETUP2);
 		outb(lp->setup2, _XREG);
-	
+
 		/* must now write the magic "restart operation" command */
 		mdelay(1);
 		outb(0x18, _COMMAND);
@@ -117,7 +117,7 @@ int com20020_check(struct net_device *dev)
 	lp->config = 0x21 | (lp->timeout << 3) | (lp->backplane << 2);
 	/* set node ID to 0x42 (but transmitter is disabled, so it's okay) */
 	SETCONF;
-	outb(0x42, ioaddr + BUS_ALIGN*7);
+	outb(0x42, ioaddr + BUS_ALIGN * 7);
 
 	status = ASTATUS();
 
@@ -129,7 +129,7 @@ int com20020_check(struct net_device *dev)
 
 	/* Enable TX */
 	outb(0x39, _CONFIG);
-	outb(inb(ioaddr + BUS_ALIGN*8), ioaddr + BUS_ALIGN*7);
+	outb(inb(ioaddr + BUS_ALIGN * 8), ioaddr + BUS_ALIGN * 7);
 
 	ACOMMAND(CFLAGScmd | RESETclear | CONFIGclear);
 
@@ -193,7 +193,7 @@ int com20020_found(struct net_device *dev, int shared)
 	lp->hw.close = com20020_close;
 
 	if (!dev->dev_addr[0])
-		dev->dev_addr[0] = inb(ioaddr + BUS_ALIGN*8);	/* FIXME: do this some other way! */
+		dev->dev_addr[0] = inb(ioaddr + BUS_ALIGN * 8);	/* FIXME: do this some other way! */
 
 	SET_SUBADR(SUB_SETUP1);
 	outb(lp->setup, _XREG);
@@ -202,7 +202,7 @@ int com20020_found(struct net_device *dev, int shared)
 	{
 		SET_SUBADR(SUB_SETUP2);
 		outb(lp->setup2, _XREG);
-	
+
 		/* must now write the magic "restart operation" command */
 		mdelay(1);
 		outb(0x18, _COMMAND);
@@ -232,7 +232,7 @@ int com20020_found(struct net_device *dev, int shared)
 		BUGMSG(D_NORMAL, "Using extended timeout value of %d.\n", lp->timeout);
 
 	BUGMSG(D_NORMAL, "Using CKP %d - data rate %s.\n",
-	       lp->setup >> 1, 
+	       lp->setup >> 1,
 	       clockrates[3 - ((lp->setup2 & 0xF0) >> 4) + ((lp->setup & 0x0F) >> 1)]);
 
 	if (register_netdev(dev)) {
@@ -243,9 +243,9 @@ int com20020_found(struct net_device *dev, int shared)
 }
 
 
-/* 
+/*
  * Do a hardware reset on the card, and set up necessary registers.
- * 
+ *
  * This should be called as little as possible, because it disrupts the
  * token on the network (causes a RECON) and requires a significant delay.
  *
@@ -258,15 +258,15 @@ static int com20020_reset(struct net_device *dev, int really_reset)
 	u_char inbyte;
 
 	BUGMSG(D_DEBUG, "%s: %d: %s: dev: %p, lp: %p, dev->name: %s\n",
-		__FILE__,__LINE__,__func__,dev,lp,dev->name);
+	       __FILE__, __LINE__, __func__, dev, lp, dev->name);
 	BUGMSG(D_INIT, "Resetting %s (status=%02Xh)\n",
 	       dev->name, ASTATUS());
 
-	BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__);
+	BUGMSG(D_DEBUG, "%s: %d: %s\n", __FILE__, __LINE__, __func__);
 	lp->config = TXENcfg | (lp->timeout << 3) | (lp->backplane << 2);
 	/* power-up defaults */
 	SETCONF;
-	BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__);
+	BUGMSG(D_DEBUG, "%s: %d: %s\n", __FILE__, __LINE__, __func__);
 
 	if (really_reset) {
 		/* reset the card */
@@ -274,22 +274,22 @@ static int com20020_reset(struct net_device *dev, int really_reset)
 		mdelay(RESETtime * 2);	/* COM20020 seems to be slower sometimes */
 	}
 	/* clear flags & end reset */
-	BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__);
+	BUGMSG(D_DEBUG, "%s: %d: %s\n", __FILE__, __LINE__, __func__);
 	ACOMMAND(CFLAGScmd | RESETclear | CONFIGclear);
 
 	/* verify that the ARCnet signature byte is present */
-	BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__);
+	BUGMSG(D_DEBUG, "%s: %d: %s\n", __FILE__, __LINE__, __func__);
 
 	com20020_copy_from_card(dev, 0, 0, &inbyte, 1);
-	BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__);
+	BUGMSG(D_DEBUG, "%s: %d: %s\n", __FILE__, __LINE__, __func__);
 	if (inbyte != TESTvalue) {
-		BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__);
+		BUGMSG(D_DEBUG, "%s: %d: %s\n", __FILE__, __LINE__, __func__);
 		BUGMSG(D_NORMAL, "reset failed: TESTvalue not present.\n");
 		return 1;
 	}
 	/* enable extended (512-byte) packets */
 	ACOMMAND(CONFIGcmd | EXTconf);
-	BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__);
+	BUGMSG(D_DEBUG, "%s: %d: %s\n", __FILE__, __LINE__, __func__);
 
 	/* done!  return success. */
 	return 0;
@@ -299,7 +299,7 @@ static int com20020_reset(struct net_device *dev, int really_reset)
 static void com20020_setmask(struct net_device *dev, int mask)
 {
 	u_int ioaddr = dev->base_addr;
-	BUGMSG(D_DURING, "Setting mask to %x at %x\n",mask,ioaddr);
+	BUGMSG(D_DURING, "Setting mask to %x at %x\n", mask, ioaddr);
 	AINTMASK(mask);
 }
 
@@ -315,7 +315,7 @@ static int com20020_status(struct net_device *dev)
 {
 	u_int ioaddr = dev->base_addr;
 
-	return ASTATUS() + (ADIAGSTATUS()<<8);
+	return ASTATUS() + (ADIAGSTATUS() << 8);
 }
 
 static void com20020_close(struct net_device *dev)